[Q] Galaxy ace gts 5830 ex4 thunderbolt v4 - Galaxy Ace S5830 Q&A, Help & Troubleshooting

Hi Guys can anyone help me with partitioning the sd card on my galaxy ace 1.I have downloaded and installed the thunderbolt v4 rom "which I really like. Trouble is following various methods mini partition and apart inc . I cannot get the rom to see my sd card.
I have tried partitioning the ex4 before the fat 32 and after. and vis versa. but nothing enables the rom to see the second fat 32 partition. I have wiped the sd card "overnight and started afresh, still no go.
Thanks in advance for any adeas /help

bwizz60 said:
Hi Guys can anyone help me with partitioning the sd card on my galaxy ace 1.I have downloaded and installed the thunderbolt v4 rom "which I really like. Trouble is following various methods mini partition and apart inc . I cannot get the rom to see my sd card.
I have tried partitioning the ex4 before the fat 32 and after. and vis versa. but nothing enables the rom to see the second fat 32 partition. I have wiped the sd card "overnight and started afresh, still no go.
Thanks in advance for any adeas /help
Click to expand...
Click to collapse
Try partitioning via the following method then wipe data, cache and dalvik and then install the rom: https://www.youtube.com/watch?v=_U_Sp_BtzrM I'm sure the guy is using that rom and it works for him.
If not i can't really help apart from suggesting using "Super Stock" rom instead. It's very fast and stable and swap works perfect.

Thanks
Thanks I'll have to concentrate and try to go through it slowly. I don't remember seeing swap in the original rom installation instruction. or do I know what it is!
The battery life improvement of thunderbolt rom is one of the reasons it appealed to me . Does the super stock rom have good battery life?
Thanks Brian UK

bwizz60 said:
Thanks I'll have to concentrate and try to go through it slowly. I don't remember seeing swap in the original rom installation instruction. or do I know what it is!
The battery life improvement of thunderbolt rom is one of the reasons it appealed to me . Does the super stock rom have good battery life?
Thanks Brian UK
Click to expand...
Click to collapse
The version 4 specs of thunderbolt does say: "Kernel changed to Battery extender swapall v3 supersu 0.97"
So yes it should work. The Super Stock rom has a battery extender kernel too with cronmod (for swap).
I think in thunderbolt the swapall is enabled by default whereas in Super stock you have to choose the cronmod option during install of the rom.
Unfortunately i made a big boo boo with my ace and now it's a doorstop. If it was working i'd install thunderbolt so i could help better but i know for a fact superstock works perfect.
Formatting the sd in CWM is simple, format in fat 32 via pc first then put the sd in the ace, boot into recovery, go to advanced and choose "partition SD", select the size of the ext partition and on the next screen set it to "0m" and that should do the trick for thunderbolt.
With superstock and the mini tool i had setup 9gb of internal memory. I was loving it until i decided to try the Miui v4 rom. Do not touch that rom whatever you do!!!!!!!!

ta I'll give it a go and report back
Ok ta .Ill give it a go and report back

still same
Hi ,I tried as suggested , the max partition under clockwork was 4 gig, which I set "My card is 32gig"
I rebooted and still the same . Link to sd give the same script error ! I noticed the partition is ex2 . ! Thunderbolt is supposed to have ex4?.
Could the sd card be getting tired . it must be getting fed up with constant wipes etc

bwizz60 said:
Hi ,I tried as suggested , the max partition under clockwork was 4 gig, which I set "My card is 32gig"
I rebooted and still the same . Link to sd give the same script error ! I noticed the partition is ex2 . ! Thunderbolt is supposed to have ex4?.
Could the sd card be getting tired . it must be getting fed up with constant wipes etc
Click to expand...
Click to collapse
You shouldn't need to use a third party app like link2sd. LOL @ "it must be getting fed up with constant wipes". Although wiping does slowly decrease the life of an sd card, modern sd cards that are good makes have like 100,000 write cycles so your contribution is minimal. Why the sd is ext2 after formating with cwm i don't know. Which version of cwm are you using? Try the latest if you're not already using it. (just really stabbing at thin air but worth a try)
If that fails or if you're using the latest i can't really help any further with the thunderbolt rom and i'd bet you'd rather use more of that sd for internal anyway so as i suggested b4 go with the superstock rom. The mini tool definately works with that so you could partition more space.
I'm trying to find a an old fan speed controller i can use as a variable resistor to try and revive my phone. If it works i'll be able to help more with thunderbolt, depends on my luck.

bwizz60 said:
Hi ,I tried as suggested , the max partition under clockwork was 4 gig, which I set "My card is 32gig"
I rebooted and still the same . Link to sd give the same script error ! I noticed the partition is ex2 . ! Thunderbolt is supposed to have ex4?.
Could the sd card be getting tired . it must be getting fed up with constant wipes etc
Click to expand...
Click to collapse
mmm... "Thunderbolt is supposed to have ex4" It means all the device partitions are in .ext4 and yeah it support .ext4 as external partition
@Way333 AFAIK there is NOT Thundebolt kernel for GT-S5830 but rather GT-S5830i

ex4
Does that mean that there should be no fat32 for media files? How would I imput them then if the computer could not see the partition?
Viper The Ripper said:
mmm... "Thunderbolt is supposed to have ex4" It means alle the device partitions are in .ext4 and yeah it support .ext4 as external partition
Click to expand...
Click to collapse

bwizz60 said:
Does that mean that there should be no fat32 for media files? How would I imput them then if the computer could not see the partition?
Click to expand...
Click to collapse
To create an external partition you need to format your sdcard and to partition it in 2 partitions:
1. FAT32 (Primary partition)
2. ext4 (512 mb is enough)
Use MiniTool Partition to do it
---------- Post added at 07:07 PM ---------- Previous post was at 06:54 PM ----------
bwizz60 said:
Does that mean that there should be no fat32 for media files? How would I imput them then if the computer could not see the partition?
Click to expand...
Click to collapse
Have a look here @bwizz60 to flash correctly the script
http://forum.xda-developers.com/showthread.php?t=2350030

I have downloaded 4 ex
So I use mini part tool then install the script .This will then correct the script error?[
QUOTE=Viper The Ripper;57112798]To create an external partition you need to format your sdcard and to partition it in 2 partitions:
1. FAT32 (Primary partition)
2. ext4 (512 mb is enough)
Use MiniTool Partition to do it
---------- Post added at 07:07 PM ---------- Previous post was at 06:54 PM ----------
Have a look here @bwizz60 to flash correctly the script
http://forum.xda-developers.com/showthread.php?t=2350030[/QUOTE]

bwizz60 said:
So I use mini part tool then install the script .This will then correct the script error?[
QUOTE=Viper The Ripper;57112798]To create an external partition you need to format your sdcard and to partition it in 2 partitions:
1. FAT32 (Primary partition)
2. ext4 (512 mb is enough)
Use MiniTool Partition to do it
---------- Post added at 07:07 PM ---------- Previous post was at 06:54 PM ----------
Have a look here @bwizz60 to flash correctly the script
http://forum.xda-developers.com/showthread.php?t=2350030
Click to expand...
Click to collapse
Yeah! that's correct
1. Partition's Management (minitools, gparted, CWM... [CWM DO NOT ALLOW YOU TO CREATE .ext4 partitions!]
2. Script
3. Enjoy

No script zip
Hi again ,I got sidetracked but back on the phone case now. I have downloaded the suggested script 2+
and placed it into root . however when I try to access it .it is not seen by clockwork 5
the other two files I downloaded are there .multi root etc but not the script zip/binary.
thanks for links and your efforts to help. great forum!

bwizz60 said:
Hi again ,I got sidetracked but back on the phone case now. I have downloaded the suggested script 2+
and placed it into root . however when I try to access it .it is not seen by clockwork 5
the other two files I downloaded are there .multi root etc but not the script zip/binary.
thanks for links and your efforts to help. great forum!
Click to expand...
Click to collapse
Download the flashable zip and flash it via CWM following the steps I've posted, it should work mate
http://forum.xda-developers.com/showpost.php?p=43312058&postcount=6

still same
I have followed instructions carefully but . I still have the same issue that the download link is seen as an install icon
not as a normal winzup file like the other available downloads. I can see the downloaded file via "my files" but not via cwm 5.0.2.6 Anon
I found that the middle link on the xda site gives me a winzip file 2+
I have followed instructions to install script zip .But looking at the sd partitions via mini tool
i see that the second partition is identified as "other". and trying to use it in the phone gives me the same script error as previosly. I don't see an option in cwm to format as ex4 ?

bwizz60 said:
I have followed instructions carefully but . I still have the same issue that the download link is seen as an install icon
not as a normal winzup file like the other available downloads. I can see the downloaded file via "my files" but not via cwm 5.0.2.6 Anon
I found that the middle link on the xda site gives me a winzip file 2+
I have followed instructions to install script zip .But looking at the sd partitions via mini tool
i see that the second partition is identified as "other". and trying to use it in the phone gives me the same script error as previosly. I don't see an option in cwm to format as ex4 ?
Click to expand...
Click to collapse
CronMod OFFICIAL Thread
CWM can't create .ext4 partitions you'll need to create it using minitools partition, gparted or similar

How to then
I am just following the steps in your instructions ,ie op 8 /format sdext
intended for thunderbolt rom?

No further forward
I'm gettin nowhere quickly with this memory mod. I also have new issues . I keep needing to reboot to get wifi to connect.
This did not happen before. maybe time to try another rom

bwizz60 said:
I'm gettin nowhere quickly with this memory mod. I also have new issues . I keep needing to reboot to get wifi to connect.
This did not happen before. maybe time to try another rom
Click to expand...
Click to collapse
:weird: maybe a rom problem?
If you have created corre tly a .ext4 you can test if it's working using Link2sd app

I'm finding the script error via link 2sd . I've just checked the ex4 partition using a parted ,There is an error sign but no explanation. Deleting and redoing
the ex4 partition gives me the same error. In the interim i've ordered a smaller sd card. This still leaves me with the need to reboot for wifi to connect. Shame as i otherwise like the rom!

Related

[HOWTO]Change SD with app2sd

Upgrading/Changing of memory/SD cards while using App2SD?
Here's how.
What you need:
-Rooted
-Drellisdee's ThunderG custom recovery(preferably v1.2)
-Card Reader(Optional)
Steps:
-Boot into recovery
-In recovery menu, select "Backup/Restore" then "Nand + ext backup".(If you are using an ext4 app2sd partition, ThunderG v1.2 is a MUST)
-Now with any means suitable to you, transfer the "nandroid" folder found on your SD to your PC.(the easiest way is to mount USB-ms via recovery, but for some reason this option doesn't work for me)
-Now turn off your phone and insert the NEW SD.
-Boot into recovery again and partition your new SD(for app2sd).
-Now again, with any means suitable to you, transfer the "nandroid" folder you just copied to your PC back to the new SD.
-In recovery menu, select "Backup/Restore" then "Nand restore", choose the file to restore(in most cases, there is only one option)
-Wait for it, now reboot.
-Enjoy!
Custom Recovery
ThunderG v1.2
man! you woke up early for this?
kudos!!!! now everyone can happily change/upgrade their cards...
(the easiest way is to mount USB-ms via recovery, but for some reason this option doesn't work for me)
Click to expand...
Click to collapse
now this doesnt seem right... i mean, it has to work.
hhmm.. mine does. im on thunderG too.
maybe youre lacking drivers for it.... have you checked you device manager?
------------------
EDIT ok i get it. i dont have the V1.2 will try to install later on.
maybe the new recovery has the problem.. and not your PC...
---------------------------------
more EDIT
ok ive just installed V1.2 and yes i can confirm that the USB toggle under recovery works for me.
now the next thing to try is upgarade to a higher capacity card... *lol*
nice one Ungaze!
lol, up late seems more like it.
usb-toggle issue might be usb driver related.
havent flashed the firmware yet so i didnt have the need to install the drivers as well.
i also used this method to revert my app2sd partition from ext4 to ext2. so it also works with different partition filesystem, someone can maybe test if it also works with different partition size.
thats backing up and restoring right?
maybe ill try it on ext4...
anyway, why convert back to ext2? is there any significance?
bluviper said:
thats backing up and restoring right?
maybe ill try it on ext4...
anyway, why convert back to ext2? is there any significance?
Click to expand...
Click to collapse
was doing a test, and speed-wise there is a slight improvement. about 50 - 80 points on I/O using quadrant. Although really unnoticeable and I don't really rely on quadrant that much, performance seems to be just the same.(OptimusXrom maker domenic_s also uses ext2).
i see.. maybe one time ill try to do ext2.. hehehe
theres not much happening with our O1 today ei?!
so i need to do something... hehehe errr experiment on something...
*lol*
now thats weird.. after rebooting the second time to recovery...
i cant find my files under Flash zip files...
seems like only system folders are installed....
I just used EASEUS Todo Backup to clone old sd card (with partition ext 4, i think) to new sd card.
It copied everything on the old sd card to new sd card and it works flawlessly.
The software is free for home user.
bluviper said:
now thats weird.. after rebooting the second time to recovery...
i cant find my files under Flash zip files...
seems like only system folders are installed....
Click to expand...
Click to collapse
are you refering to this step?
-Boot into recovery again and partition your new SD(for app2sd).
which i highly doubt. please explain.
I just used EASEUS Todo Backup to clone old sd card (with partition ext 4, i think) to new sd card.
It copied everything on the old sd card to new sd card and it works flawlessly.
The software is free for home user.
Click to expand...
Click to collapse
good for you. just sharing how I did it since changing SDs are becoming pretty common nowadays.
ungaze, after installing the recovery...
and rebooting it via adb, i can still access the files on my sd card. like for example i want to install a new theme etc etc using Flash ZIP menu on V1.2
but after rebooting the second time.
i cant see the files anymore... just folders....
im not into changing cards. but i just want to install something using V1.2 recovery.
and somehow i cannot see my zip files inside Flash ZIP menu.
thats the place to look for when i want to install flashable zips right?
I see, I think I know what you mean.
One of the new features of ThunderG v1.2 recovery is the ability to recognize folders when choosing a zip file to flash. Well that's good, but the problem is that it still doesn't have the option to scroll down when the screen/list is full(or maybe I just havent found out yet). I also had this problem before, so what I did was to make a new folder with a higher alphabetical priority name, eg: "aaflash", "aflashfiles", "1flash" etc so that the folder will always appear at the top. Then I placed all my zip files into that folder and just open the folder when I need to apply something. Try it, the files should appear.
yap. someone told me that too... and so i did.. and yes it can be read...
but we can still consider that a bug.
and i think the author needs to edit that part.
anyhow. its working fine....
What does this do? Is this the way we can move all our apps to sd card??? Please im desperate
Sent from my LG-P500 using XDA App
ungaze said:
lol, up late seems more like it.
usb-toggle issue might be usb driver related.
havent flashed the firmware yet so i didnt have the need to install the drivers as well.
i also used this method to revert my app2sd partition from ext4 to ext2. so it also works with different partition filesystem, someone can maybe test if it also works with different partition size.
Click to expand...
Click to collapse
could you explain how you converted the ext4 partition into ext2?
victortangocharlie said:
could you explain how you converted the ext4 partition into ext2?
Click to expand...
Click to collapse
Actually, I can't really call it a convertion, I just backed up the SD contents, format it, repartition ext2 than put the old contents back in place. Update: Ext2 on optimusXrom's app2sd doesnt seem to work, didn't checked thoroughly and app2sd got disabled. Need to contact domenic on how he did this.
domenic_s said:
No, actually ext2 is faster than ext3 ... i don't know how it is to ext4 but i'm using ext2 at the moment.
Click to expand...
Click to collapse
Hey ungaze,
Could you tell me how to use apps2sd to move an app to the ext4 partition i have on my phone.

[Guide]How 2 Create EXT3 for the Salsa only! * Increased Internal Memory*

Ok seems many usrs here have the same problems over and over again. so heres a tut!
This will probably cover many other topics but simplified here as much as i can.
You Must have the following to get this to work:
ROOT
Recovery 5.0.2.6
busybox installed.
if you have non of these...do not attempt any of this thread till you have!
To start with.
Creation of EXT3 Partitions.
you will need Minitool Partition Wizard. Mini Tool Partition Wizard Download
This is a harddrive/diskspace program allowing accurate modification of disk space.
Never create an EXT3 in CWM, as this will create whats known as a swap drive.
this causes the bootloop. Hence the non boot!
EXT3 has to be set as primary drive not logical.
Size allowance recommendations (personal choice, but this is after a few findings and results given by Salsa users)
SD Card Size.................................EXT3 Size
2GB......(Class 2).............................250MB
4GB......(Class 2-4)..........................500MB
8GB......(Class4-6)...........................500MB-1GB
16GB....(Class8-10).........................1.2GB​
WARNING, anything over 1.5GB will result in serious problems and SD damage
This also works around class types of SD Card. the higher the class the faster it works, there are various brands offering different class cards, find a fast and big card for best performance. I currently use Class 8 16GB with 1GB Ext3 with little/no lag
Wise idea before this to make an SD backup, if done correctly your data will not be affected...if you screwed up...you'll loose everything...so back it up!
To start with,
Remove Sd Card and use and SD Reader and insert into your computer USB Slot.
Open Minitool Partition Wizard.
Resize your sd card accordingly leaving 1.2-1.5gb of unallocated space. Apply the actions.
Now you have the unallocated space, reformat the space in EXT3 and set as Primary drive. Apply Actions.
Now normally the Application throws your sd out and says bad drive......this is sometimes normal so don't panic.
Reinsert your Sd in Phone and boot into recovery only
Data2sd script
theres 2 scripts available for these roms.
htc-data2sd-ext3 or data2whatever by m1ndh8x4r.
2.1 Roms work well with htc-data2sd-ext3 script with no problems.
data2whatever works really well with 3.5 sense Roms (Bens/M1nds)
*****There is a warning with this data2whatever script....When using this script, you will notice after a short period, that you cannot update or install any more apks. This is due to a Dalvik error within the script on Deodexed roms, currently it cannot be fixed, you have been warned*****​
these can be used easily but the following rules must be applied.
You must flash the rom firstly by the 3 wipes...regardless!
flash the rom as normal and reboot full, letting the rom fully build it self and load up... ie input your details/sign in wifi etc.
check it out for a few mins while your waiting...hey even make a backup lol!
OK now reboot in recovery and flash the chosen script....DO NOT WIPE ANYTHING!
once flashed reboot normally.
it will boot, it may take up to 5-10mins but it will boot. if by any chance you a boot loop at the boot animation screen then you have an EXT3 fault and you must redo the EXT3 Partition in Minitool to proceed again.
data2sd scripts are here>
http://www.mediafire.com/download.php?duigp9ky9796b65 for htc-data2sd-ext3.zip
http://www.mediafire.com/download.php?m7bv6pk024p63ef for d2extv0.43.zip (New/Advanced)
http://www.mediafire.com/download.php?qr5rh2fho1hnbnl for data2whatever
This is a proven way and so many have tried and failed other ways.
Please try this guide. If you get stuck please just ask!
Please Answer my poll at the top and Thank this post...Ty!
If you Answer NO to this guide, please post below and tell me why so i may help further
Heyy it worked thanks man
BigBearEvo said:
Open Minitool Partition Wizard.
Resize your sd card accordingly leaving 1.2-1.5gb of unallocated space. Apply the actions.
Now you have the unallocated space, reformat the space in EXT3 and set as Primary drive.
Click to expand...
Click to collapse
Trying to do this with fdisk on linux
It works but runs slowly for some reason
I have a 2GB cards, first partition is about 1.4 for normal /sdcard the remaining .4GB for /data
Both partitions are start aligned on 2048 sectors
Issue - applications get corrupted after restart
I am facing strange issue. I did everything described above and have /data on sd. But everytime I reboot something happens to most apps. They are installed but when I try to launch any of them I got errors and application closes. I need to reinstall EVERY app and they work until next reboot. Any ideas about the cause or what to check ? At this point I am trying not to discharge or reboot my phone by it;s impossible to keep it that way.
procek said:
I am facing strange issue. I did everything described above and have /data on sd. But everytime I reboot something happens to most apps. They are installed but when I try to launch any of them I got errors and application closes. I need to reinstall EVERY app and they work until next reboot. Any ideas about the cause or what to check ? At this point I am trying not to discharge or reboot my phone by it;s impossible to keep it that way.
Click to expand...
Click to collapse
thats a rom issue.
What rom are you running?
Are you using a Data2sd script? if so which one?
Are you using links2sd?
BigBearEvo said:
thats a rom issue.
What rom are you running?
Are you using a Data2sd script? if so which one?
Are you using links2sd?
Click to expand...
Click to collapse
I am running standard HTC ROM 1.12.401.2 With Sense 2.1.
I used ext3 version of script.
No. Shall I ?
procek said:
I am running standard HTC ROM 1.12.401.2 With Sense 2.1.
I used ext3 version of script.
No. Shall I ?
Click to expand...
Click to collapse
no dont lol...ok sounds a bit stupid but have u got root? because what your describing is and apps2sd thing...which u cant get on stock rom....but if u dont have full root....then this sort of thing does happen....or...you got a faulty ext3 partition...
questions next...
which guide did u make ext3?
size and did u make swap?
root?
Need file name of the data2sd script u used and how u used it...(this is important)
so i need full break down....assuming u have root that is....this almost sounds like a silly problem, but then most of us don't use stock roms anymore....so we dont have this problem lol
BigBearEvo said:
no dont lol...ok sounds a bit stupid but have u got root? because what your describing is and apps2sd thing...which u cant get on stock rom....but if u dont have full root....then this sort of thing does happen....or...you got a faulty ext3 partition...
questions next...
which guide did u make ext3?
size and did u make swap?
root?
Need file name of the data2sd script u used and how u used it...(this is important)
so i need full break down....assuming u have root that is....this almost sounds like a silly problem, but then most of us don't use stock roms anymore....so we dont have this problem lol
Click to expand...
Click to collapse
Of course I have a root - it works perfectly. I created the partition according to above instructions (I mean this thread). My ext3 partition is about 800 MB and 3200 MB is for FAT32. I did not create swap - just fat32 and ext3 with Partition Wizard. I used htc-data2sd-ext3.zip in I think normal way - phone reset, installing busybox, reboot, installing script with recovery - done. Everything is perfect until next reboot.
procek said:
Of course I have a root - it works perfectly. I created the partition according to above instructions (I mean this thread). My ext3 partition is about 800 MB and 3200 MB is for FAT32. I did not create swap - just fat32 and ext3 with Partition Wizard. I used htc-data2sd-ext3.zip in I think normal way - phone reset, installing busybox, reboot, installing script with recovery - done. Everything is perfect until next reboot.
Click to expand...
Click to collapse
sounds like a problem with your rom my friend....hard to tell without seeing it really...
have you thought about changing the rom itself?
BigBearEvo said:
sounds like a problem with your rom my friend....hard to tell without seeing it really...
have you thought about changing the rom itself?
Click to expand...
Click to collapse
To this moment no. But if there's no other option I will probably have to...
procek said:
To this moment no. But if there's no other option I will probably have to...
Click to expand...
Click to collapse
either that or find your ruu and reinstall stock again!
Funny thing
I used my previous card (smaller - just 2 GB) and there's no such behaviour as with my 4GB. Smaller one is Sandisk, bigger one is Kingstone - both known for good products. So switching ROM is rather not an option. There's something about SD but I can not figure out what...
Pls help
I have created 6gb of fat32 and copied ROM and data2sd-ext3.zip then formatted remaining 1gb space in ext3. When I tried to install zip from recovery mode it throws "E: can't mount /sdcard/"
pls help
Thx
yuva0103 said:
I have created 6gb of fat32 and copied ROM and data2sd-ext3.zip then formatted remaining 1gb space in ext3. When I tried to install zip from recovery mode it throws "E: can't mount /sdcard/"
pls help
Thx
Click to expand...
Click to collapse
how did you make the partitions? and are they set as primary?
what class sd card is it? you need a class 8 or 10 on that size.
I used mini tool for partition. I set fat32 as logical and ext3 as primary. I have 8gb class 10 SD.
Sent from my HTC Salsa C510e using XDA
Shrink the ext3 to 750mb and set all partitions as primary.
BigBear is using Xparent Tapatalk Purple
Yep now I can see my data in SD card. Another problem I triple wiped and flash arc rom again, and given detail/sign in. When trying to flash script in recovery mode, it asks for busybox in some sys folder. I don't have busybox and also script installed, but ext3 memory not reflects in as main memory. Am I used different script or I need to install busybox, if so how to do that.?
I installed busybox @ system/xbin and flashed script, it worked. Finally my internal memory problem solved:thumbup:
I request to add installing busybox step and download link for script in tutorial.
Thx bb
Sent from my HTC Salsa C510e using XDA
I used data2sd without without any problem for past two days, suddenly today some apps force closing. Instagram app show error msg like"unfortunately this device's filesystem is reporting a problem." and pointing to this url "bit.ly/igfilesystem".
pls help.
I'm using arc V2 ROM, class 10 8gb sd, with 750mb of ext3.
yuva0103 said:
I used data2sd without without any problem for past two days, suddenly today some apps force closing. Instagram app show error msg like"unfortunately this device's filesystem is reporting a problem." and pointing to this url "bit.ly/igfilesystem".
pls help.
I'm using arc V2 ROM, class 10 8gb sd, with 750mb of ext3.
Click to expand...
Click to collapse
contact instagram with a logcat or report for them to check

SD-EXT

I am looking forward to make a partition of my SD Card to allow easier installation of apps.
I have a 16GB Micro-SD Card and i'm looking forward to make a 4GB Partition.
I've heard of amarullz script and I definitely want to use it.
I searched XDA Alot, and i found out that there are different partition types. So if someone could kindly answer these questions, It would be great:
1) Can you give me a simple and efficient guide on how to partition using CWM, or anything else?
2) What partition type should i use.
3) Does Amarullz script need to be configured or it's the simple flashing.
4) Is there any way to automatically move apps to sd-ext without apps like S2E. I think the scripts do that but i'm not sure.
Thanks.
xD
masterex567 said:
1) Can you give me a simple and efficient guide on how to partition using CWM, or anything else?
2) What partition type should i use.
3) Does Amarullz script need to be configured or it's the simple flashing.
4) Is there any way to automatically move apps to sd-ext without apps like S2E. I think the scripts do that but i'm not sure.
Thanks.
xD
Click to expand...
Click to collapse
1 no, use search and check the stickies. Cwm and partition guides are all over the place. Reading several guides to do it will help you in case something doesn't go as planned.
2 depends. Stock roms work better with fat32 and ext2 partitions. Custom roms work good with any ext format partition. Cwm creates ext3 format partitions, for other formats use another partitioning tool (minitool partition wizard).
3 just flash it and reboot twice. It needs a kernel that supports /init.d, which most custom roms have, and stock roms can be flashed with cf-root to enable /init.d.
4 yeah, the scripts do it. There are several, amarullz is one, there's also int2ext++ and darktremors (this one requires some user input though). Look them up, make your call.
dxppxd said:
1 no, use search and check the stickies. Cwm and partition guides are all over the place. Reading several guides to do it will help you in case something doesn't go as planned.
2 depends. Stock roms work better with fat32 and ext2 partitions. Custom roms work good with any ext format partition. Cwm creates ext3 format partitions, for other formats use another partitioning tool (minitool partition wizard).
3 just flash it and reboot twice. It needs a kernel that supports /init.d, which most custom roms have, and stock roms can be flashed with cf-root to enable /init.d.
4 yeah, the scripts do it. There are several, amarullz is one, there's also int2ext++ and darktremors (this one requires some user input though). Look them up, make your call.
Click to expand...
Click to collapse
oK..
Any link to a simple and efficient guide on partitioning??
Just a tip. Never go beyond 1GB SD-ext size. You'll just wait it coz app size are about 20-30 mb (the bigger ones) and you'll not be installing that much on your phone.
About partitioning you can just do it via CWM recovery.
Shadow xD said:
Just a tip. Never go beyond 1GB SD-ext size. You'll just wait it coz app size are about 20-30 mb (the bigger ones) and you'll not be installing that much on your phone.
About partitioning you can just do it via CWM recovery.
Click to expand...
Click to collapse
Okk..
I just wanted to install over 10 pages of apps.
I heard partitioning through CWM makes an ext3 partition, and ext3 partitions are not supported.
One question: I'm following this: http://forum.xda-developers.com/showthread.php?t=1476121
If i use minitool partition wizard and follow the instructions there. will amarullz script work?
And will it work on all roms like cm7, cm9 and stock????
Thanks.
Ext4 has been said around as unstable. *need to research more on this one*
Yes, CWM makes ext3 partition.
If you're using CM7 based ROM I'd suggest using S2E. Supports ext3, no errors whatsoever, 1GB is more than enough for over 100 apps, and make sure the SD Card is class 6 or higher, otherwise you might face performance issues. It's just install, tick and forget. Unlimited *theoretically* apps can be installed then
I do not have any idea on Amarulzz script though,
This Page might help
So what's the best partition??
If i follow this guide: http://forum.xda-developers.com/wiki/SD_card_partitioning
Will it succesfully get me the result?
masterex567 said:
So what's the best partition??
If i follow this guide: http://forum.xda-developers.com/wiki/SD_card_partitioning
Will it succesfully get me the result?
Click to expand...
Click to collapse
Yes that's a good guide.
Ok. Great.
Final Question: What Partition type should i use? Ext2, Ext3 or Fat32??
It should work good with amarullz script and with stock and cm7 roms...
Damn. I try deleting partition through minitool and after that my sd card isn't recognized, it says damaged.
though i fixed it with a format. :/
masterex567 said:
Ok. Great.
Final Question: What Partition type should i use? Ext2, Ext3 or Fat32??
It should work good with amarullz script and with stock and cm7 roms...
Damn. I try deleting partition through minitool and after that my sd card isn't recognized, it says damaged.
though i fixed it with a format. :/
Click to expand...
Click to collapse
I use ext3 with a 16gb class 6 sd card (1gb partition) with A2SD+ cronmod script.
Shadow xD said:
I use ext3 with a 16gb class 6 sd card (1gb partition) with A2SD+ cronmod script.
Click to expand...
Click to collapse
Okk. I've finished the first step according to the guide.
Well. According to the guide "Step 2". and created the fat32 primary partition. Now on step 3 i'm kind of clueless. coz i can't click create new partition as it is greyed out.
I think i'm just gonna use CWM.
What's the procedure to use CWM, to partition for 4gb?? and then use amarullz??
masterex567 said:
Okk. I've finished the first step according to the guide.
Well. According to the guide "Step 2". and created the fat32 primary partition. Now on step 3 i'm kind of clueless. coz i can't click create new partition as it is greyed out.
I think i'm just gonna use CWM.
What's the procedure to use CWM, to partition for 4gb?? and then use amarullz??
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1477996
Shadow xD said:
http://forum.xda-developers.com/showthread.php?t=1477996
Click to expand...
Click to collapse
Thanks. I partitioned.
Now, I'm going to use amarullz script. I see that it needs to be copied to init.d.
Isn't there any way to make a flashable zip coz i change roms aloot.
Thx!!
Search for the original thread here in xda. You will find the flashable zip
Sent from my GT-S5830 using xda premium
Shadow xD said:
Search for the original thread here in xda. You will find the flashable zip
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
I got it. It's ok..
I prefer doing it manually anyways.
Thanks a lott!

[Q] SD partitioning

Hy everybody,
My question is at the bottom
Internal memory is not enough on galaxy ACE ? sd card can be partitioned and used with "llink2sd" as internal memory.
I did :
- Using MiniTool Partition Wizard Home Edition I partitioned SD card to two primary fat32 partitions.
- I rebooted my phone with sd card in it
- EXPECTED it to be mounted correctly, to run Link2SD to format second partition to ext3 or keep it fat32 or wathever.
BUT :
Android says that sd card is damaged
Reasons :
- Android expects one partition formatted in FAT32 with no MBR (?) in the begining of the memory :silly:
Solution :
- Partition memory with a tool that can tell Android how to read MBR or how to deal with multi partition sd card. tools like Rom manager.
My question is, is there another way to tell Android how to deal with my sd card ? without changing the rom ? using for example terminal emulator ? or can you please explain to me how I can use Rom manager to partition ? cause I didn't succeed with it.
and pleeease I'm just fed up with answers like :
"but why do you need to partition ?"
"why don't u just use app2sd ?"
"why don't you get a girlfriend instead of spending all your time on a phone that you hate ?"
NB : I updated my phone manually to 2.3.6 then rooted it. I don't want to use custom roms EXCEPT if you give me a hint about the best roms arround
Thank you in advance
I used cwm to partition my sd card and it works fine
Sent from my GT-S5830 using xda app-developers app
1. you can re-partition your sd card to one partition (FAT, I think) by partitioning software
2. boot Clockworkmod recovery (Home + Power)
3. Advanced > partitioning sd card
4. Choose how much you want
5.done
6.Finally I suggest you install PSN Memory Mod
2.3-http://forum.xda-developers.com/showthread.php?t=1960652
4.x-http://forum.xda-developers.com/showthread.php?t=1959779
KelvinCheong said:
1. you can re-partition your sd card to one partition (FAT, I think) by partitioning software
2. boot Clockworkmod recovery (Home + Power)
3. Advanced > partitioning sd card
4. Choose how much you want
5.done
6.Finally I suggest you install PSN Memory Mod
2.3-http://forum.xda-developers.com/showthread.php?t=1960652
4.x-http://forum.xda-developers.com/showthread.php?t=1959779
Click to expand...
Click to collapse
hi just want to ask, after we follow this instruction and flash PSN mem mod are we going to install LINK2SD? or the psn will automatiicaly take the apks to the internal mem after installation?
mizukage said:
hi just want to ask, after we follow this instruction and flash PSN mem mod are we going to install LINK2SD? or the psn will automatiicaly take the apks to the internal mem after installation?
Click to expand...
Click to collapse
No you only need to install PSN.
It is a DATA2EXT SCRIPT. I am happy with it.
I prefer SD-EXT > 1GB, its enough, and you need a Class 6 sdcard
KelvinCheong said:
No you only need to install PSN.
It is a DATA2EXT SCRIPT. I am happy with it.
I prefer SD-EXT > 1GB, its enough, and you need a Class 6 sdcard
Click to expand...
Click to collapse
is this applicable to all ROMS?since PSN is just only memory swap..right?
mizukage said:
is this applicable to all ROMS?since PSN is just only memory swap..right?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1960652 <<<<<<<<<Support all based on CM7.2
Version for ics/jb I tried in PAC Rom but didnt work
so what version is yours?
KelvinCheong said:
http://forum.xda-developers.com/showthread.php?t=1960652 <<<<<<<<<Support all based on CM7.2
Version for ics/jb I tried in PAC Rom but didnt work
so what version is yours?
Click to expand...
Click to collapse
thanks man,,, i tried it to erickas nighlly it works for swapping but some issue, like bluetooth is not turning on..do u think link2sd is compatible to nightly?
mizukage said:
thanks man,,, i tried it to erickas nighlly it works for swapping but some issue, like bluetooth is not turning on..do u think link2sd is compatible to nightly?
Click to expand...
Click to collapse
bluethooth is a common issue.
You can try other roms
Take a look at my thread on how to move apps to sd without any script and partition
Link : http://forum.xda-developers.com/showthread.php?t=2211984
Sent from my GT-S5830 using xda premium
anasfeelgood said:
Hy everybody,
My question is at the bottom
Internal memory is not enough on galaxy ACE ? sd card can be partitioned and used with "llink2sd" as internal memory.
I did :
- Using MiniTool Partition Wizard Home Edition I partitioned SD card to two primary fat32 partitions.
- I rebooted my phone with sd card in it
- EXPECTED it to be mounted correctly, to run Link2SD to format second partition to ext3 or keep it fat32 or wathever.
BUT :
Android says that sd card is damaged
Reasons :
- Android expects one partition formatted in FAT32 with no MBR (?) in the begining of the memory :silly:
Solution :
- Partition memory with a tool that can tell Android how to read MBR or how to deal with multi partition sd card. tools like Rom manager.
My question is, is there another way to tell Android how to deal with my sd card ? without changing the rom ? using for example terminal emulator ? or can you please explain to me how I can use Rom manager to partition ? cause I didn't succeed with it.
and pleeease I'm just fed up with answers like :
"but why do you need to partition ?"
"why don't u just use app2sd ?"
"why don't you get a girlfriend instead of spending all your time on a phone that you hate ?"
NB : I updated my phone manually to 2.3.6 then rooted it. I don't want to use custom roms EXCEPT if you give me a hint about the best roms arround
Thank you in advance
Click to expand...
Click to collapse
Welcome to the forum.
Our Ace (and other phones) doesn't recognize a SD card partitioned with MiniTool Partition Wizard.
Instead download CWM 5 here: http://forum.xda-developers.com/showthread.php?t=1291327
Then turn the phone off. Reboot into recovery mode by holding the power and the home button till the Samsung logo appears for the second time. Choose apply update from SD card and install CWM.
Reboot into recovery again. This time there should be the CWM recovery.
Select Advanced > Partition sdcard
But backup the data on your SD card using your computer before doing that and restore them afterwards.
Then reboot the phone and Link2SD and the OS will recognize the card. However, this method will create an ext partition which is better for that use.
For ROMs:
This is the best I have found so far: http://forum.xda-developers.com/showthread.php?t=2173576
If you want Cm, try this: http://forum.xda-developers.com/showthread.php?t=2212438 or http://forum.xda-developers.com/showthread.php?t=2199575
If you want a standard Android, flash this: http://forum.xda-developers.com/showthread.php?t=2181854
Please be so kind and click thanks if I helped you.
---------- Post added at 05:19 PM ---------- Previous post was at 05:18 PM ----------
NEVER use ROM Manager on this phone! It will hard-brick it which will be the very end of the phone as the hardware will be destroyed!!!
Will the CWM process work with Battery Extender Kernel ???
cennation4apprentice said:
Will the CWM process work with Battery Extender Kernel ???
Click to expand...
Click to collapse
Works with any kernel, any Rom. But backup everything on your memory card before partitioning. Partitioning erases everything on it. And by the way, if the commands I gave on my thread haven't worked for you, check for my previous post on the thread. These commands must work on gingerbread and the ones in op should work for cm10.1
Sent from my GT-S5830 using xda premium
Actually, you can use Minitool Partition Wizard to be use with Link2SD.
First make sure your phone is rooted.
Second, by using minitool make 2 partition on sd card.
First Partition make sure It PRIMARY and file system is FAT32
Second Partition also make sure it PRIMARY and file system is EXT3 or EXT4
(I would like to recommend EXT3 because many roms support this file system)
Install the Link2SD, open the app, select the file system and reboot.
You will get your Link2SD worked.
ps : How about using Final S'Periance rom with Memory Mod kernel. Just do the SD Card Partition and flash the rom. All your problem with internal memory will gone.
hanzalah83 said:
Actually, you can use Minitool Partition Wizard to be use with Link2SD.
First make sure your phone is rooted.
Second, by using minitool make 2 partition on sd card.
First Partition make sure It PRIMARY and file system is FAT32
Second Partition also make sure it PRIMARY and file system is EXT3 or EXT4
(I would like to recommend EXT3 because many roms support this file system)
Install the Link2SD, open the app, select the file system and reboot.
You will get your Link2SD worked.
ps : How about using Final S'Periance rom with Memory Mod kernel. Just do the SD Card Partition and flash the rom. All your problem with internal memory will gone.
Click to expand...
Click to collapse
DON'T DO THIS!
Link2SD will work but your first partition won't be recognized, at least in Jelly Bean.
anasfeelgood said:
Hy everybody,
My question is at the bottom
Internal memory is not enough on galaxy ACE ? sd card can be partitioned and used with "llink2sd" as internal memory.
I did :
- Using MiniTool Partition Wizard Home Edition I partitioned SD card to two primary fat32 partitions.
- I rebooted my phone with sd card in it
- EXPECTED it to be mounted correctly, to run Link2SD to format second partition to ext3 or keep it fat32 or wathever.
BUT :
Android says that sd card is damaged
Reasons :
- Android expects one partition formatted in FAT32 with no MBR (?) in the begining of the memory :silly:
Solution :
- Partition memory with a tool that can tell Android how to read MBR or how to deal with multi partition sd card. tools like Rom manager.
My question is, is there another way to tell Android how to deal with my sd card ? without changing the rom ? using for example terminal emulator ? or can you please explain to me how I can use Rom manager to partition ? cause I didn't succeed with it.
and pleeease I'm just fed up with answers like :
"but why do you need to partition ?"
"why don't u just use app2sd ?"
"why don't you get a girlfriend instead of spending all your time on a phone that you hate ?"
NB : I updated my phone manually to 2.3.6 then rooted it. I don't want to use custom roms EXCEPT if you give me a hint about the best roms arround
Thank you in advance
Click to expand...
Click to collapse
The Best Roms around are :-
M'rage Rom
SGS2 Rom
Monster X2 Rom
Sperience Rom
Spongebob Rom

[Q] ext partion

hi
i havent use ext partion before. i trying a new rom which need ext pation. i watched a video about it and i flashed the rom.
i have some bugs.and some apps stop working. i couldnt write the roms thread(i m new). i sent personal mesage to the developer. i explane the problems but he said he didnt faced before. and wait for update.
i read all post for the rom but i didn see such kind of problem.so i think i have made a mistake about partion.
can partion couse this or what can be problem?
i m waitin for your ansfers...
(sorry for my english)
isn't any idea???
HearThief said:
isn't any idea???
Click to expand...
Click to collapse
which rom are you using? which script? how did you do your sd-ext partition?
Viper The Ripper said:
which rom are you using? which script? how did you do your sd-ext partition?
Click to expand...
Click to collapse
rom:Touchwiz Revolutionized 5.0 Rom-v2.0 my sd: team 16 gb micro sd
i have watched a video about it
as i said i try ext firs time and i cant answer about script. i have no idea about it.
HearThief said:
rom:Touchwiz Revolutionized 5.0 Rom-v2.0 my sd: team 16 gb micro sd
i have watched a video about it
as i said i try ext firs time and i cant answer about script. i have no idea about it.
Click to expand...
Click to collapse
well let's start again! you need to create an ext partition, use mini partition tools, here it is a tutorial http://forum.xda-developers.com/showthread.php?t=2142844, until point 11!... avoid the rest of them and finally install the rom following the instructions
Edit: the rom is using the int2ext script, so right "/data" partition is symlinked to your sd-ext partition, so maybe it is the problem
Viper The Ripper said:
well let's start again! you need to create an ext partition, use mini partition tools, here it is a tutorial http://forum.xda-developers.com/showthread.php?t=2142844, until point 11!... avoid the rest of them and finally install the rom following the instructions
Click to expand...
Click to collapse
i have ext partion.
i have created ext 4 with mini tool but i didnt use link2sd .
if i didt understand wrong, this methot moves the flashed roms. the rom i ask about flash directly sd (i think). because i couldn open the phone without partion. when i look memory i see the created part as phone memory. i couldnt understand about it. should i use link2sd in this case. if i do link2sd steps ,will the problems end?
HearThief said:
i have ext partion.
i have created ext 4 with mini tool but i didnt use link2sd .
if i didt understand wrong, this methot moves the flashed roms. the rom i ask about flash directly sd (i think). because i couldn open the phone without partion. when i look memory i see the created part as phone memory. i couldnt understand about it. should i use link2sd in this case. if i do link2sd steps ,will the problems end?
Click to expand...
Click to collapse
According what you said the script is working, so Link2sd is NOT neccesary.
Int2ext increase de internal memory, this script mount your sd-ext partiotin and link it with /data partition, so if you created a 512mb ext partition, you should see about 5120mb as internal memory.
The rom is under construction, you can also try to start again as I said you following all the steps
as you said i have same internal memory.
i ll follow all steps . should i create ex4 or ext2. I read ext4 is better for class10. and one more question will bugs end after this
HearThief said:
as you said i have same internal memory.
i ll follow all steps . should i create ex4 or ext2. I read ext4 is better for class10. and one more question will bugs end after this
Click to expand...
Click to collapse
If you have a class 6 or 10 sdcard make a ext4 partition, if not you can also use an ext4 partition but it will do a little slower your rom.
I can't guarantee that everything will work well, but It should, note that the rom as I said you before, is under construction so It've several bugs, you can try another rom CM10 by Mardon, Oldroid or Bieltv3 e.g. or a Stock based rom
I like this rom s wiev. I havent use ext portion and I want to learn .also I didn't see any bad thing about it.
When I see bugs I think I have made a mistake. Now I know what should I do. If won't work I'll try another.
You are very patient. Thanks alot.
(Sory for my bad english)

Categories

Resources