Related
After following his two step process, thanks MT, I still have CWM installed after returning to stock. I did this today 3-22-12 so I doubt it was the old file he talks about in the thread. Any help would be appreciated.
Regards,
-Trevor
Edit- I would like to get CWM off.
whhs41 said:
After following his two step process, thanks MT, I still have CWM installed after returning to stock. I did this today 3-22-12 so I doubt it was the old file he talks about in the thread. Any help would be appreciated.
Regards,
-Trevor
Edit- I would like to get CWM off.
Click to expand...
Click to collapse
Hey that's just the stock rom has nothing to do with recovery..to return to stock flash the file you mentioned in the title boot into cwm wipe data/factory reset boot back up grab the all in one program and select unroot and I believe that removes cwm been a few weeks since I have done it.
Sent from my Galaxy Nexus using xda premium
Thy the following link this has tools to do what you want. They are not too hard to use this is how I both rooted my phone and and installed CWM.
I have been trying for a while, can't get it to boot. Someone posted a zip of the factory rom over in the at&t section, doesn't seem to want to flash. Not sure if it's missing something.
Any help would be greatly appreciated.
Umh, you will return stock but the rom posted in your section will not work?
Guich said:
Umh, you will return stock but the rom posted in your section will not work?
Click to expand...
Click to collapse
No, it doesn't work. It's from this thread http://forum.xda-developers.com/showthread.php?t=2270552
Downloaded the recovery, and at the bottom someone posted the stock rom. TWRP won't read the rom, and cwm will read it but after 3 seconds it reboots. He said he didn't test it, so something appears to be wrong with it.
Also tried flashing the stock recovery, and that just gives me a blank screen with an arrow in a triangle after a little while.
Seems a rom.zip problem.
Stock recovery will not flash
harlenm said:
No, it doesn't work. It's from this thread http://forum.xda-developers.com/showthread.php?t=2270552
Downloaded the recovery, and at the bottom someone posted the stock rom. TWRP won't read the rom, and cwm will read it but after 3 seconds it reboots. He said he didn't test it, so something appears to be wrong with it.
Also tried flashing the stock recovery, and that just gives me a blank screen with an arrow in a triangle after a little while.
Click to expand...
Click to collapse
download the unrooted nandroid found here http://forum.xda-developers.com/showthread.php?t=2272893
it's TWRP
restore it
factory reset it after you restore if you want to remove your data
install stock recovery
lock bootloader
done
bootloader will say RELOCKED
gunnyman said:
download the unrooted nandroid found here http://forum.xda-developers.com/showthread.php?t=2272893
it's TWRP
restore it
factory reset it after you restore if you want to remove your data
install stock recovery
lock bootloader
done
bootloader will say RELOCKED
Click to expand...
Click to collapse
Thank you!
Guich said:
Seems a rom.zip problem.
Stock recovery will not flash
Click to expand...
Click to collapse
Got a new stock rom to try. Yes, I know it won't flash, using adb, typed up description wrong.
gunnyman said:
download the unrooted nandroid found here http://forum.xda-developers.com/showthread.php?t=2272893
it's TWRP
restore it
factory reset it after you restore if you want to remove your data
install stock recovery
lock bootloader
done
bootloader will say RELOCKED
Click to expand...
Click to collapse
this is what i did and it worked great for me , now if only we could remove the "TAMPERED" text it would be almost identical to stock, not that it matters i was able to still exchange it
anilkuj said:
this is what i did and it worked great for me , now if only we could remove the "TAMPERED" text it would be almost identical to stock, not that it matters i was able to still exchange it
Click to expand...
Click to collapse
We need s-off for do this...
Sent from ONE with Tapa4 Beta
got a boot loop from trying to restore to stock, i came from cm 10.1 and i backed up cm 10.1 first then tried to restore but it decided to boot loop. it just stays at i897 screen, i am able to get into download mode, (haven't seen if odin recognizes it yet.) but no recovery at least i dont think, might be doing button combos wrong. i have only used odin a few times so i wouldnt know how to get back to stock, any help please?
Trozzul said:
got a boot loop from trying to restore to stock, i came from cm 10.1 and i backed up cm 10.1 first then tried to restore but it decided to boot loop. it just stays at i897 screen, i am able to get into download mode, (haven't seen if odin recognizes it yet.) but no recovery at least i dont think, might be doing button combos wrong. i have only used odin a few times so i wouldnt know how to get back to stock, any help please?
Click to expand...
Click to collapse
Get odin KK4 without bootloaders and flash it in download mode. From there, make it sure it boots up and flash korn kernel wih Odin 1.87 (or 1.85). From there, you're free to flash any ROM you want.
Sent from my SGH-I747 using xda app-developers app
BWolf56 said:
Get odin KK4 without bootloaders and flash it in download mode. From there, make it sure it boots up and flash korn kernel wih Odin 1.87 (or 1.85). From there, you're free to flash any ROM you want.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
uh what lol? when i rooted it i followed a guide that made me update to stock gingerbread and get gingerbread bootloaders, i flashed korn kernel i think and was able to get root. dont quite know what to do sorry bruh xD
See this post for an Odin or Heimdall One Click to Stock i897ucKK4... http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3
Instructions included.
Once ya get back to Stock KK4 (and maybe get Root if u wanna try that again), u probably need to stop there until u read up and get comfortable with the flashing processes etc. before u move on any further. :thumbup:
Trozzul said:
... i came from cm 10.1 and i backed up cm 10.1 first then tried to restore but it decided to boot loop.
Click to expand...
Click to collapse
You can't restore stock ROM (2.3.x) from CM10.1 (4.2.2). Different Android versions use different partitions. As mentioned in posts above, easiest way to go back to stock is Odin one-click file. No need to flash bootloaders again, so use version without bootloaders. In order to restore your CM10.1 backup you need to flash CM10.1 ROM first (to repartition), then flash same CM10.1 ROM one more time. When installing process is done, go ahead and restore your CM10.1 backup. No need to reboot the phone, nor install gapps. When restoring is complete, reboot the phone. Now you're back to your CM10.1 setup where you started from.
Easy to understand Captivate upgrade guide - https://docs.google.com/document/d/1YvC_lLbjk06WOttsifG8fD2QUHvC9_rDtZdNrDZKAFc/edit?pli=1
Val D. said:
You can't restore stock ROM (2.3.x) from CM10.1 (4.2.2). Different Android versions use different partitions. As mentioned in posts above, easiest way to go back to stock is Odin one-click file. No need to flash bootloaders again, so use version without bootloaders. In order to restore your CM10.1 backup you need to flash CM10.1 ROM first (to repartition), then flash same CM10.1 ROM one more time. When installing process is done, go ahead and restore your CM10.1 backup. No need to reboot the phone, nor install gapps. When restoring is complete, reboot the phone. Now you're back to your CM10.1 setup where you started from.
Easy to understand Captivate upgrade guide - https://docs.google.com/document/d/1YvC_lLbjk06WOttsifG8fD2QUHvC9_rDtZdNrDZKAFc/edit?pli=1
Click to expand...
Click to collapse
hmm interesting, i thought you were able to go to lower android versions, is this just like this for the cappy only? and soo pretty much alll i do is do what the guy said above me, and use your guide you gave me to root it?
Trozzul said:
hmm interesting, i thought you were able to go to lower android versions, is this just like this for the cappy only? and soo pretty much alll i do is do what the guy said above me, and use your guide you gave me to root it?
Click to expand...
Click to collapse
You can go lower, just gotta follow certain steps.
As for what you need to do, it was already all provided to you. I suggest you read through it a few times, make sure you fully understand it and then proceed with flashing.
That being said, right more you can do exactly what i told you and flash odin kk4 without bootloaders to have a working phone.
Sent from my SGH-I747 using xda app-developers app
4-2ndtwin said:
See this post for an Odin or Heimdall One Click to Stock i897ucKK4... http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3
Instructions included.
Once ya get back to Stock KK4 (and maybe get Root if u wanna try that again), u probably need to stop there until u read up and get comfortable with the flashing processes etc. before u move on any further. :thumbup:
Click to expand...
Click to collapse
crap forgot to mention this is a rogers version (i896) not at&t. will this be a problem?
Trozzul said:
crap forgot to mention this is a rogers version (i896) not at&t. will this be a problem?
Click to expand...
Click to collapse
Nop, I'm on Rogers myself.
Trozzul said:
crap forgot to mention this is a rogers version (i896) not at&t. will this be a problem?
Click to expand...
Click to collapse
Rogers stock 2.3.3 Odin one-click is available also in sticky threads, if you prefer Rogers ROM. Just do a quick search.
Hey guys, any info on this would be great.
Have a ATT Note 3... It boots into recovery and Download mode..
Basically, I was going to install knoxraid, wiped /system /data, but didn't have the rom file to flash.
Then, rebooted phone, and it will go into stock recovery but not safestrap.
Please help... I know it can't be completely bricked.
I tried unbrick-soft-bricked-att-galaxy-note-3-sm-900a but it fails
(also, I am sure Samsung drivers are installed)
kuttor said:
Hey guys, any info on this would be great.
Have a ATT Note 3... It boots into recovery and Download mode..
Basically, I was going to install knoxraid, wiped /system /data, but didn't have the rom file to flash.
Then, rebooted phone, and it will go into stock recovery but not safestrap.
Please help... I know it can't be completely bricked.
I tried unbrick-soft-bricked-att-galaxy-note-3-sm-900a but it fails
(also, I am sure Samsung drivers are installed)
Click to expand...
Click to collapse
So you can't get the phone to boot normally? What happens when you try to let the phone boot up on it's on without trying to go into recovery or download mode?
Same thing happened to me once.. just took it to my nearest at&t and told them I was upgrading to kit Kat by computer thru kies and that my daughter unplugged my phone during its process and failed and they fixed it for me..free
Sent from my SAMSUNG-SM-N900A using xda app-developers app
kuttor said:
Hey guys, any info on this would be great.
Have a ATT Note 3... It boots into recovery and Download mode..
Basically, I was going to install knoxraid, wiped /system /data, but didn't have the rom file to flash.
Then, rebooted phone, and it will go into stock recovery but not safestrap.
Please help... I know it can't be completely bricked.
I tried unbrick-soft-bricked-att-galaxy-note-3-sm-900a but it fails
(also, I am sure Samsung drivers are installed)
Click to expand...
Click to collapse
I believe you are going to have to Odin back with the Odin JB files. Their is three of them. I see if I can find you more info as to what to do.
---------- Post added at 09:20 PM ---------- Previous post was at 09:06 PM ----------
kuttor said:
Hey guys, any info on this would be great.
Have a ATT Note 3... It boots into recovery and Download mode..
Basically, I was going to install knoxraid, wiped /system /data, but didn't have the rom file to flash.
Then, rebooted phone, and it will go into stock recovery but not safestrap.
Please help... I know it can't be completely bricked.
I tried unbrick-soft-bricked-att-galaxy-note-3-sm-900a but it fails
(also, I am sure Samsung drivers are installed)
Click to expand...
Click to collapse
Here is the like on how to get back to JB.
http://forum.xda-developers.com/showthread.php?t=2707555
htsl said:
I believe you are going to have to Odin back with the Odin JB files. Their is three of them. I see if I can find you more info as to what to do.
---------- Post added at 09:20 PM ---------- Previous post was at 09:06 PM ----------
Here is the like on how to get back to JB.
http://forum.xda-developers.com/showthread.php?t=2707555
Click to expand...
Click to collapse
That would work beautifully, but I don't have safe strap installed and can't get into a ROM...
Basically, I can get into download and stock recovery mode.
Ideas4ya said:
So you can't get the phone to boot normally? What happens when you try to let the phone boot up on it's on without trying to go into recovery or download mode?
Click to expand...
Click to collapse
Nope, I erased system and data... So, I can get into recovery and download mode.
Any help is hugely appreciated....if I could flash safe strap, it would be fine.
kuttor said:
Nope, I erased system and data... So, I can get into recovery and download mode.
Any help is hugely appreciated....if I could flash safe strap, it would be fine.
Click to expand...
Click to collapse
All your gonna have to do is Odin some JB files and your Safestrap should still be on their regardless of you erassing your system data.
---------- Post added at 11:34 PM ---------- Previous post was at 11:32 PM ----------
kuttor said:
Nope, I erased system and data... So, I can get into recovery and download mode.
Any help is hugely appreciated....if I could flash safe strap, it would be fine.
Click to expand...
Click to collapse
What version of SafeStrap did you have installed ? 3.7.1 or 3.7.2
Dude. Wait. If you wiped system you have no rom..All you have to do is use your computer and download a rom and push to your sd card. Then use stock or recovery to flash. Lol. I did this on my nexus once. Anyway it's simple fix.
Sent from my SAMSUNG-SM-N900A using xda app-developers app
kuttor said:
Nope, I erased system and data... So, I can get into recovery and download mode.
Any help is hugely appreciated....if I could flash safe strap, it would be fine.
Click to expand...
Click to collapse
I would say you could revert to MJ5 link http://forum.xda-developers.com/showthread.php?t=2559715. Read it to the T. This will put the MJ5 4.3 back on your phone. You don't need safestrap to revert back to MJ5 method. You can root and install safestrap back on when its installed. Just do steps 1-9 if you don't want to root this method. don't worry about this download link ( https://mega.co.nz/#F!icMTnSQY!bMBNFmUnn2_K8olSTYpwIA (mirror provided by drakeymcmb) i'ts just a mirror for the ml9 fix.image ext4.
YRC123 said:
I would say you could revert to MJ5 link http://forum.xda-developers.com/showthread.php?t=2559715. Read it to the T. This will put the MJ5 4.3 back on your phone. You don't need safestrap to revert back to MJ5 method. You can root and install safestrap back on when its installed. Just do steps 1-9 if you don't want to root this method. don't worry about this download link ( https://mega.co.nz/#F!icMTnSQY!bMBNFmUnn2_K8olSTYpwIA (mirror provided by drakeymcmb) i'ts just a mirror for the ml9 fix.image ext4.
Click to expand...
Click to collapse
Alright, I'll follow this eexact. I am not new to flashing and ROM mods. (Been doing it since the s2). I normally would push via ADB, use a custom recovery and be set. But, just picked up the note 2… and ADB wouldnt detect the phone to push ROM.. (Using ADB device). So, anyways.... I know I have to use ODIN. I know its not fubard because the phone boots into download and stock recovery mode.
Thanks everyone, I really want to get this fix. Luckily I have a nexus 5 as well.
kuttor said:
Alright, I'll follow this eexact. I am not new to flashing and ROM mods. (Been doing it since the s2). I normally would push via ADB, use a custom recovery and be set. But, just picked up the note 2… and ADB wouldnt detect the phone to push ROM.. (Using ADB device). So, anyways.... I know I have to use ODIN. I know its not fubard because the phone boots into download and stock recovery mode.
Thanks everyone, I really want to get this fix. Luckily I have a nexus 5 as well.
Click to expand...
Click to collapse
hold on do you have the note 2 or note 3
jerrycoffman45 said:
hold on do you have the note 2 or note 3
Click to expand...
Click to collapse
Note 3 -- sorry.
kuttor said:
Alright, I'll follow this eexact. I am not new to flashing and ROM mods. (Been doing it since the s2). I normally would push via ADB, use a custom recovery and be set. But, just picked up the note 2… and ADB wouldnt detect the phone to push ROM.. (Using ADB device). So, anyways.... I know I have to use ODIN. I know its not fubard because the phone boots into download and stock recovery mode.
Thanks everyone, I really want to get this fix. Luckily I have a nexus 5 as well.
Click to expand...
Click to collapse
We can't use the old way to get into our or past our bootloaders. If you follow everything on revert to MJ5 steps 1-9 that should give you bootable verse of MJ5 4.3. If you still want root and stay on MJ5 ok. If you want the next software fix then don't root yet then try to get the NB4 patch then you can root with Kingo 1.18.
Hey guys thx for reading,
have a sm-G870A with 5.0 lollipop flashfired by muni everything was good till my boot up screen wouldnt show safestrap. so i messed with it and found myself installing twrp recovery not thinking correctly i now know. So my dilema is that im stuck at at&t splash screen, i tried odin to stock nE4,
i also tried the stock 4.4.2 rom to totally reset framwork, but still cant get passed the splash screen. do i gotta flash the oc5 stock rom from stock recov? or odin? any help all plz much appreciated tyvm.
biohazzord said:
Hey guys thx for reading,
have a sm-G870A with 5.0 lollipop flashfired by muni everything was good till my boot up screen wouldnt show safestrap. so i messed with it and found myself installing twrp recovery not thinking correctly i now know. So my dilema is that im stuck at at&t splash screen, i tried odin to stock nE4,
i also tried the stock 4.4.2 rom to totally reset framwork, but still cant get passed the splash screen. do i gotta flash the oc5 stock rom from stock recov? or odin? any help all plz much appreciated tyvm.
Click to expand...
Click to collapse
You are going to have to reflash stock firmware yes, theres a thread for it in general, might be a couple pages back. Just for future refrence, safestrap doesnt really work(in a fully conventional way) on lollipop, and you cant install twrp or cwm or philz or anything else.
Sent from my Twi5ted SM-G900A using Tapatalk
Rakuu said:
You are going to have to reflash stock firmware yes, theres a thread for it in general, might be a couple pages back. Just for future refrence, safestrap doesnt really work(in a fully conventional way) on lollipop, and you cant install twrp or cwm or philz or anything else.
Sent from my Twi5ted SM-G900A using Tapatalk
Click to expand...
Click to collapse
see i already tried using odin for the G870AUCU1ANE4_G870AATT1ANE4_G870AUCU1ANE4_HOME.tar but it still wont push through the splash screen.
are you saying i need to odin G870A_OC5_Stock_Rooted_ROM?
biohazzord said:
see i already tried using odin for the G870AUCU1ANE4_G870AATT1ANE4_G870AUCU1ANE4_HOME.tar but it still wont push through the splash screen.
are you saying i need to odin ?
Click to expand...
Click to collapse
G870A_OC5_Stock_Rooted_ROM won't flash with Odin. If you flashed stock NE4 .tar in odin and won't boot try factory reset from recovery
nutt_case said:
G870A_OC5_Stock_Rooted_ROM won't flash with Odin. If you flashed stock NE4 .tar in odin and won't boot try factory reset from recovery
Click to expand...
Click to collapse
ok im trying that as we speak. will that delete all my data. probably right?
biohazzord said:
ok im trying that as we speak. will that delete all my data. probably right?
Click to expand...
Click to collapse
Yes it will