Database Develop

[Q] black screen after ViperoneS flashed

Guys I rolled back my phone to stock ROM then I flashed it with ViperOneS.
I followed all the directions after I flashed the rom, wiped cache, fastboot reboot, then flash the boot.img using the flash-boot-script.
I can tell that the phone boots successfully but all I get is a black screen. What gives?
My phone info is
VLE PVT SHIP S-ON RL
HBOOT- 1.14 0004
RADIO- 01.08TS.50.02.16
OpenDSP- V29.1.0.45.06.22
eMMC-BOOT
Aug 14 2012, 18:01:48

ADB in bootloader

Please help me.
I've done something really stupid. I flashed from ClockWorkMod to Android Revolution HD on my HTC One m7.
I've got ClockWorkMod Recovery installed and when flashing was done i got stuck in HTC startup screen.
Trying to get in to recovery mode again and install my backup did not work, it just shows ClockWorkMod Recovery logo and reboots. When in bootloader mode, i can't access the phone through adb or fastboot, no devices in list.
Is there any way to use ADB/fastboot when in the bootloader screen?
Info from bootloader screen:
M7_UL PVT SHIP S-ON RH
HBOOT-1.56.0000
RADIO-4A.23.3263.28
OpenDSP-V32.120.274.0909
OS-4.19.401.8
eMMC-boot 2048MB

reboot your computer and tyr again.
bewn said:
Please help me.
I've done something really stupid. I flashed from ClockWorkMod to Android Revolution HD on my HTC One m7.
I've got ClockWorkMod Recovery installed and when flashing was done i got stuck in HTC startup screen.
Trying to get in to recovery mode again and install my backup did not work, it just shows ClockWorkMod Recovery logo and reboots. When in bootloader mode, i can't access the phone through adb or fastboot, no devices in list.
Is there any way to use ADB/fastboot when in the bootloader screen?
Info from bootloader screen:
M7_UL PVT SHIP S-ON RH
HBOOT-1.56.0000
RADIO-4A.23.3263.28
OpenDSP-V32.120.274.0909
OS-4.19.401.8
eMMC-boot 2048MB
Click to expand...
Click to collapse

bewn said:
Please help me.
I've done something really stupid. I flashed from ClockWorkMod to Android Revolution HD on my HTC One m7.
I've got ClockWorkMod Recovery installed and when flashing was done i got stuck in HTC startup screen.
Trying to get in to recovery mode again and install my backup did not work, it just shows ClockWorkMod Recovery logo and reboots. When in bootloader mode, i can't access the phone through adb or fastboot, no devices in list.
Is there any way to use ADB/fastboot when in the bootloader screen?
Info from bootloader screen:
M7_UL PVT SHIP S-ON RH
HBOOT-1.56.0000
RADIO-4A.23.3263.28
OpenDSP-V32.120.274.0909
OS-4.19.401.8
eMMC-boot 2048MB
Click to expand...
Click to collapse
CMW does not work with ARHD. You need TWRP 2.6.3.3
http://techerrata.com/browse/twrp2/m7
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot reboot-bootloader
Enter recovery and flash ARHD again
Sent from my HTC One using XDA Premium 4 mobile app

After fastboot flash recovery ...
fastboot erase cache

SOLVED
bored_stupid said:
CMW does not work with ARHD. You need TWRP 2.6.3.3
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot reboot-bootloader
Enter recovery and flash ARHD again
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks bored_stupid! This solved the installation problem.
The other problems were solved like this:
The first problem was that fastboot didn't connect to my PC.
This was solved by changing computer to one with a USB 2.0.
Now the problem I had with my recovery was solved by flashing the recovery partition again and clean the cache (forget that the first time).
fastboot flash recovery clockworkrec.img
fastboot erase cache
After this I was able to get in recovery mode.

[Q] Problem with HTC One - MaximusHD 42.0.0

Hey guys, i need your help!
My HTC One restart all time after installation MaximusHD...the bootloader its running but the system not.
After the Maximus installation the message appear: set_metadata_recursive: some changes failed
My device is S-ON and unlocked.
See the (Power _ Volume button menu) (sorry about my english).
*** TAMPERED ***
*** UNLOCKED ***
M7_UL PVT SHIP S-ON RH
HOOT-1.55.0000
RADIO-4T.20.3218.13
OpenDSP-v31.120.274.0617
OS-3.17.502.3
eMMC-boot 2048MB
What i need to do?

tonnyype said:
Hey guys, i need your help!
My HTC One restart all time after installation MaximusHD...the bootloader its running but the system not.
After the Maximus installation the message appear: set_metadata_recursive: some changes failed
My device is S-ON and unlocked.
See the (Power _ Volume button menu) (sorry about my english).
*** TAMPERED ***
*** UNLOCKED ***
M7_UL PVT SHIP S-ON RH
HOOT-1.55.0000
RADIO-4T.20.3218.13
OpenDSP-v31.120.274.0617
OS-3.17.502.3
eMMC-boot 2048MB
What i need to do?
Click to expand...
Click to collapse
Did you read the instructions on flashing MaximumHD?
You must wipe before flashing a new ROM.
In other words. Try flashing again.

tonnyype said:
After the Maximus installation the message appear: set_metadata_recursive: some changes failed
Click to expand...
Click to collapse
outdated recovery, if you have an m7_u/ul use TWRP 2.6.3.3 or 2.6.3.4
get TWRP from:
2.6.3.3: http://techerrata.com/browse/twrp2/m7
or 2.6.3.4: http://techerrata.com/browse/twrp2/m7ul
(make sure MD5 is correct, that site does not play nice with download managers)
I also think 2.7.1.2 works but i haven't tested it personally: http://mdmower.cmphys.com/twrp-m7/
BTW, this is mentioned in the FAQ sticky, please search

After update TWRP (and a lot of other ways) my HTC restarted! Finally!
Tnks alll

[Q] htc butterfly S official ruu needed for HTC__621

Dear All
I have problem on my htc
first , my phone is boot loop (fast boot and hboot is ok) but this issue happened during when usn debuging was off) it's mean the adb not any act and also not working recovery mode
i tried to install some CWM and TWRP the installation was ok but not entering to recovery and back to bootloader mode!
and then try to install custom rom (maximus) after finished and restart , the problem is remain .
i try to erase data-cache-system by fastboot command but only erased cache . after try to erase data and system i have this message :FAILED (remote:not allowed)
i think i need a stock rom by RUU.exe format for solve this problem .
pls help me
In general phone is HTC Butterfly S (901e):
***TAMPERED***
*** UNLCOKED ***
DLXP_U PVT SHIP S-ON RH
CID-HTC__621
HBOOT-1.57.0000
RADIO-4T.27.3218.14
OpenDSP-v32.120.274.0909
OS-
eMMC-boot 2048MB

maka133 said:
Dear All
I have problem on my htc
first , my phone is boot loop (fast boot and hboot is ok) but this issue happened during when usn debuging was off) it's mean the adb not any act and also not working recovery mode
i tried to install some CWM and TWRP the installation was ok but not entering to recovery and back to bootloader mode!
and then try to install custom rom (maximus) after finished and restart , the problem is remain .
i try to erase data-cache-system by fastboot command but only erased cache . after try to erase data and system i have this message :FAILED (remote:not allowed)
i think i need a stock rom by RUU.exe format for solve this problem .
pls help me
In general phone is HTC Butterfly S (901e):
***TAMPERED***
*** UNLCOKED ***
DLXP_U PVT SHIP S-ON RH
CID-HTC__621
HBOOT-1.57.0000
RADIO-4T.27.3218.14
OpenDSP-v32.120.274.0909
OS-
eMMC-boot 2048MB
Click to expand...
Click to collapse
There is no RUU for this phone, at least nobody found one yet.

bricked htc one m7 - failed venom 8.00 update

i had venom 7.02 on and tried to flash to 8 yesterday
was in a rush so not paying full attention, my own fault
now phone is stuck in cwm recovery v6.0.4.6
can get to bootloader
but cant do anything else - tried to do a recovery, but it still goes to cwm
if i do the install of the venom0ne 8 it seems to work
stock kernal flashed sucessfully - then it gets to 5.00% - writing data and then it says "viperone v8.00 install failed. installer status: 7"
cant connect to pc with usb for some reason either
in bootloader it says
Tampered
unlocked
M7_UL PVT SHIP S-ON RH
H BOOT-1.55.0000
RADIO-4A.21.3263.04
Open DSP-v32.120.274.0909
OS-3.63.61.1
eMMC-boot 2048MB
Oct 21 2013.22:50:54.7856
Any help appreciated
ash

ash005 said:
i had venom 7.02 on and tried to flash to 8 yesterday
was in a rush so not paying full attention, my own fault
now phone is stuck in cwm recovery v6.0.4.6
can get to bootloader
but cant do anything else - tried to do a recovery, but it still goes to cwm
if i do the install of the venom0ne 8 it seems to work
stock kernal flashed sucessfully - then it gets to 5.00% - writing data and then it says "viperone v8.00 install failed. installer status: 7"
cant connect to pc with usb for some reason either
in bootloader it says
Tampered
unlocked
M7_UL PVT SHIP S-ON RH
H BOOT-1.55.0000
RADIO-4A.21.3263.04
Open DSP-v32.120.274.0909
OS-3.63.61.1
eMMC-boot 2048MB
Oct 21 2013.22:50:54.7856
Any help appreciated
ash
Click to expand...
Click to collapse
Error status 7 means the recovery doesn't like something in the zip.
Try a different recovery, what does the Rom thread suggest?