Phone dont respond. - Xperia SP Q&A, Help & Troubleshooting

I was using cm12 rom almost one week and everything was working great. Yesterday my phone started lag extremly. When i tried reset by reset buton my phone turned off without any vibration and after it died. He doesnt respond for anything. What it can be? Looking forward for responds!

lorkan126 said:
I was using cm12 rom almost one week and everything was working great. Yesterday my phone started lag extremly. When i tried reset by reset buton my phone turned off without any vibration and after it died. He doesnt respond for anything. What it can be? Looking forward for responds!
Click to expand...
Click to collapse
Flash .ftf with flashtools

To recover your device from any further damage that a software may have imposed onto the hardware, I recommend you to flash an .ftf file to return back to the Stock ROM by utilizing Flashtool. To learn and understand the process to using the Flashtool Utility, head over to my Wiki and navigate to the corresponding wiki page for the Xperia SP - Flashtool Wiki Guide.
Furrydaus Wiki ->

Furrydaus said:
To recover your device from any further damage that a software may have imposed onto the hardware, I recommend you to flash an .ftf file to return back to the Stock ROM by utilizing Flashtool. To learn and understand the process to using the Flashtool Utility, head over to my Wiki and navigate to the corresponding wiki page for the Xperia SP - Flashtool Wiki Guide.
Furrydaus Wiki ->
Click to expand...
Click to collapse
I cant, i was flashing kernels previusly, its not the same problem, because both flash and fast boot modes dont works, led just dont light up. So i think it can be mechanical problem with reset button pressed too strong and blocked/damaged phone, i used this very often so..

lorkan126 said:
I cant, i was flashing kernels previusly, its not the same problem, because both flash and fast boot modes dont works, led just dont light up. So i think it can be mechanical problem with reset button pressed too strong and blocked/damaged phone, i used this very often so..
Click to expand...
Click to collapse
Then the best course of action for you is to seek help from your nearest Sony service center and get it repaired. Or alternatively, purchase a new phone

Related

Xperia TX bricked (only showing sony logo then a triangle with an exclamation mark)

Please help me guys, I have no one else to turn to. My parents are gonna kill me if they find out what I did to my phone.
So my phone accidentally fell at school with the bluetooth still on.So I put the battery pack, power it on, but then it started to go on a boot loop i.e.
Sony logo-->Xperia Logo-->color animation-->black screen. But after 3-4 hours, it managed to do a complete boot! But I noticed that the bluetooth wasnt turning on. So stupid me, I restarted the device, then it started to go on a boot loop again. I got home and I tried it a couple of times more with the power and volume rocker combinations... didnt work either.
I even started using pc companion. didnt work (kept on doing the same thing
SUS --> same thing
NOW: I tried it using a different computer so I went to an internet shop and downloaded pcc and sus. I started pc companion... but halfway through the download... MY PHONE RAN OUT OF BATTERY and didnt finish the update. :'( Now, whenever I'm booting the phone, I only get the Sony logo and A TRIANGLE WITH AN EXCLAMATION MARK AND A PHONE UNDERNEATH.....
PLEASE HELP ME! My Phone is a Sony Xperia TX Lt29
Last Version before the crash: JB 4.1.2
No root (Noob here)
please... please. i dont know what to do. thank you in advance to anyone who can help me
calm down.
Charge the phone until it is fully charged.
Download PCCompanion and do a fresh install of it.
Run PCCompanion and choose software update.
Use the option to repair your phone, then follow the instructions.
Let us know how you get on
PS
This will only do a software repair, if something broke because you dropped it (Which it sounds like) you are going to have to come clean and tell your parents to get it fixed.
HI gregbradley '^^
gregbradley said:
calm down.
Charge the phone until it is fully charged.
Download PCCompanion and do a fresh install of it.
Run PCCompanion and choose software update.
Use the option to repair your phone, then follow the instructions.
Let us know how you get on
PS
This will only do a software repair, if something broke because you dropped it (Which it sounds like) you are going to have to come clean and tell your parents to get it fixed.
Click to expand...
Click to collapse
THANK YOU FOR YOUR REPLY!!! really thank you :'(
I already did something with the phone because I've been doing a lot of searching on the net lately...
I reinstalled the software using Sony Update Service (SUS) and it booted normally! (but sadly it was only during the FIRST BOOT UP) when I turned off the phone to re insert the sim card and micro sd, It started doing it again... but then, after 6 or 7 tries, it managed to skip past the sony logo-->xperia--> logo-->color animation? and do another complete boot
Now I decided to go to settings and do a complete factory reset cause I thought it would fix everything... but it didn't. It started doing the same thing, and I had to give it 10 or 12 tries before eventually booting up again. When it booted up normally, I was even able to play music with it and change the settings like brightness, volumes, equalizers, and even arrange widgets!
SITUATION NOW:I turn on the Wi-fi and it's in a boot loop again and I'm charging the phone up to 100%
(i did the vol.up vol down power combination before charging)
gregbradley, is it because of our slow internet connection??? (it took me like 4 nerve racking hours to finish the update) but sus was able to complete the download and install the software... what the f*ck is wrong with my phone (((( ohgod
AND:
I'll follow your instructions when the charge is complete...... and I'll be back to you with the results.God I hope this works.Thank you again.
Have you tried only partially flashing part of an ftf file. I know when my phone was on the brink of death I discovered that if I only flashed part of an ftf using flashtool that it would work. I think I would check everything that has exclude (ie: Exclude System) and it would work for me. Its not the end of the world though as the phone does work. Just a bootloop. If you can get it into flash mode then just exclude everything except System, Kernel, and baseband if I'm not mistaken.
hi Cammarratta '^^
Cammarratta said:
Have you tried only partially flashing part of an ftf file. I know when my phone was on the brink of death I discovered that if I only flashed part of an ftf using flashtool that it would work. I think I would check everything that has exclude (ie: Exclude System) and it would work for me. Its not the end of the world though as the phone does work. Just a bootloop. If you can get it into flash mode then just exclude everything except System, Kernel, and baseband if I'm not mistaken.
Click to expand...
Click to collapse
Thank you for the reply man '^^
um... to tell you the truth, I have no idea how to partially flash a tft file, let alone flashing. O_O (see how noob i am?) its saddening. So am I in the point right now where my phone's problem is unsolvable via pc companion or sony update service??? Plus I've been doing some searching here on xda and I saw this thread about xperia TX users updating to version b 167 and that their bootloaders are now locked.
This is what my phone is exactly doing whenever I try to boot it up:
Sony Logo---->Xperia Logo----> Color waves animation?---> FREEZE-->black screen then the Sony Logo again.
Whenever I try to boot up for the 2nd time this happens:
Sony Logo----> Black Screen---> Phone turns off---> Sony Logo again
(((
You have flashtool yes? If you load up like you're going to flash a ftf file. Once you click to load up the ftf file it'll pull a menu where you pick what you want to flash. On the right side of flashtool that's where the exclude part is. That's where you have to check the *exclude option. The same thing happened to me when I accidentally flashed a T cm10 rom on my phone. I had to partially flash a ftf file to get it to boot. It should work but since you're not familiar with flashtool its going to make it a bit harder for you in the end. :/
carloptimus3d said:
Please help me guys, I have no one else to turn to. My parents are gonna kill me if they find out what I did to my phone.
So my phone accidentally fell at school with the bluetooth still on.So I put the battery pack, power it on, but then it started to go on a boot loop i.e.
Sony logo-->Xperia Logo-->color animation-->black screen. But after 3-4 hours, it managed to do a complete boot! But I noticed that the bluetooth wasnt turning on. So stupid me, I restarted the device, then it started to go on a boot loop again. I got home and I tried it a couple of times more with the power and volume rocker combinations... didnt work either.
I even started using pc companion. didnt work (kept on doing the same thing
SUS --> same thing
NOW: I tried it using a different computer so I went to an internet shop and downloaded pcc and sus. I started pc companion... but halfway through the download... MY PHONE RAN OUT OF BATTERY and didnt finish the update. :'( Now, whenever I'm booting the phone, I only get the Sony logo and A TRIANGLE WITH AN EXCLAMATION MARK AND A PHONE UNDERNEATH.....
PLEASE HELP ME! My Phone is a Sony Xperia TX Lt29
Last Version before the crash: JB 4.1.2
No root (Noob here)
please... please. i dont know what to do. thank you in advance to anyone who can help me
Click to expand...
Click to collapse
just let it plug in with the charger and keep your phone on for day, usually that will fix it after a few hours with that logo running
Use a battery charger, charge for at least half the entire batt and then follow the thread on flashing, download some files while charging to minimize downtime
Sent from my LT29i using xda premium
Hey guys...... ))))
First and foremost, thank you for all your replies.. really helped me a lot (
It's okay now guys! '^^ I re installed the software via Sony Update Service and it worked. At first I thought the phone was a goner cause it didn't manage to do a complete boot right after the installation. (Phone was stuck on the Sony Logo) But then the next morning, I tried it again and it worked!!
BUT: What I fear now is that the phone might suddenly crash again if I turn on the WI-FI (just like what happened in my previous attempts) If the phone crashes, I fear that the phone would start going on a boot loop again.So basically, I'm just using the phone for media purposes only i.e. Walkman, Gallery,Camera, Movies.
Any thoughts on this, cool, awesome people of xda? '^^ (cant update my apps and google now f*ck)
just.. sad. I miss Flipboard,Modern Combat 4, My Daddy Was a Thief, Real Racing 3, DEAD SPACE (((
one question...
Did something broke inside my phone when it fell?? If yes... WHAT EXACTLY IS IT?? why is it behaving this way??? Why does it keep on boot looping??? should I go and let an expert open it????
carloptimus3d said:
First and foremost, thank you for all your replies.. really helped me a lot (
It's okay now guys! '^^ I re installed the software via Sony Update Service and it worked. At first I thought the phone was a goner cause it didn't manage to do a complete boot right after the installation. (Phone was stuck on the Sony Logo) But then the next morning, I tried it again and it worked!!
BUT: What I fear now is that the phone might suddenly crash again if I turn on the WI-FI (just like what happened in my previous attempts) If the phone crashes, I fear that the phone would start going on a boot loop again.So basically, I'm just using the phone for media purposes only i.e. Walkman, Gallery,Camera, Movies.
Any thoughts on this, cool, awesome people of xda? '^^ (cant update my apps and google now f*ck)
just.. sad. I miss Flipboard,Modern Combat 4, My Daddy Was a Thief, Real Racing 3, DEAD SPACE (((
Click to expand...
Click to collapse
If it's only when you start the wifi it's an hardware problem.
Send it to service
hello
Cammarratta said:
You have flashtool yes? If you load up like you're going to flash a ftf file. Once you click to load up the ftf file it'll pull a menu where you pick what you want to flash. On the right side of flashtool that's where the exclude part is. That's where you have to check the *exclude option. The same thing happened to me when I accidentally flashed a T cm10 rom on my phone. I had to partially flash a ftf file to get it to boot. It should work but since you're not familiar with flashtool its going to make it a bit harder for you in the end. :/
Click to expand...
Click to collapse
What version for ftf version for xperia tx should i flash???? the ics one??? the latest??? helppp
and should i check everything that's in the exclude option?
The latest one, and don't exclude anything
Sent whilst sat on the toilet.

[Q] Getting back to stock - with root

hi all
I think I probably know the answer to this but just to make sure..
I have for a long time had gregs Assaye-V2.0.1, which was great but was starting to slow down somewhat. so for my sins I tried with CM 10(.1 i think) still not quite sure about the differences between cm10 versions, but I digress.
anyway I put cm 10.1. I tried both FXP and so called stable CM release and its been a nightmare.
GPS problems, camera problems, browser problems - basically multiple reboots daily making the phone pretty much unusable. so thinking that I would like to get back to the beginning. I would like to maintain root and retain CWM but avoid the standard bloat that comes with stock roms.
Happy to bung a custom kernel on there, not after massive speed as I don't play games, battery life and reliability are paramount for me.
I wonder if someone could recommend the best way to go about this, and possibly a FTF/Kerne/ROM to go with that recommendation.
is it worth re-locking the bootloader for instance? can you even do that and maintain root.. ? so many questions - sorry I have gotten rather out of touch.
I would stick Assaye on again but seems it hasn't moved for quite some time and not sure if there is a better option.
any help very much appreciated
just to be clear - my current situation is:
Xperia T bought from Phones 4U
rooted
unlocked bootloader
currently running CM 10.1
thanks
nat
Thanks for using my rom, I hope it worked fine for you
In order to go back to stock you MUST relock the bootloader. Or you can flash doomkernel (which is for stock roms) and before you let it boot properly go into recovery and flash a stock based rom
If you relock the bootloader your phone will bootloop on CM if you try to turn it on, don't worry, just run pccompanion and force a repair of the software.
Then your phone will be exactly the same as when you took it of the box, so you can start again..
EDIT
My rom never updated because it was always just for me, and I was happy with it, now I have a Z1 and my daughter has my T, she hates my rom ;( and insists on CM
hi greg
thanks for the reply
guess I would be happy with a stock based rom to retain root. could you recommend one - other than your own?
which as it happens I am bunging back on as i type this...
thanks
also how do I set the buttons back to the original ones..?
sur eI have asked this before but cant find the answer...
To get back to original stock then once you have locked the bootloader just run pccompanion and force a repair of you r software in software update,
To get the button back to stock just push a stock systemUI.apk to system/app or better still install xposed framework and xblast module.
I think it works on the T, try it
http://forum.xda-developers.com/showthread.php?t=1574401
then with the xblast module you gat a choice of buttons plus a load of other options as well
hi
so, I flashed the ftf re-lock bootloader.
all appeared to go well but....
I have been trying to no avail to get pc companion to run a repair.
the phone will not turn on, all I get when i hit the power is the led flashes red briefly twice, I can keep holding the power and it will keep doing a double rad flash every second or so.
when I plug into the pc - as part of the repair process - ie. holding down vol + power. I get a windows sound for connecting then another for disconnecting - I havent of course actually pulled it out at this point.
any ideas?
guessing its just not getting the green led for flashmode thus pc companion is not going to run a repair...
any other suggestions..?
thanks
edit: seems it has connected with a green led now.. however - it does not stay connected long enough for pc companion to fully download the update and i have to start all over again..
is there any way I can download the update separately and sort it that way..
Leave it on charge on your wall charger for the rest of the day, then try pccompanion later tonight
hi
thanks for the replies.
I had left it charging all last night. seems that it will only stay in flashmode for a short time, which isnt long enough to complete the flashing
the downloading part of the pc companion had completed and it was doing to pc -> phone bit, but never completes as green light goes off before it finishes..
I will leave it charging again overnight, but fear the worst.
presumably flashing a stock ftf with flashtool would achieve similar results?
will give that a go too and see how it goes..
hoping that I could run pc companion after doing that if it works?
n
xda-nat said:
hi
thanks for the replies.
I had left it charging all last night. seems that it will only stay in flashmode for a short time, which isnt long enough to complete the flashing
the downloading part of the pc companion had completed and it was doing to pc -> phone bit, but never completes as green light goes off before it finishes..
I will leave it charging again overnight, but fear the worst.
presumably flashing a stock ftf with flashtool would achieve similar results?
will give that a go too and see how it goes..
hoping that I could run pc companion after doing that if it works?
n
Click to expand...
Click to collapse
if lfashtool works then yes...but not sure what your issue is here...
finally success, managed to use flashtool to flash parts of the ftf at a time, left it charging overnight and booted up fine in the a.m.
then have just ran pc companion to get a fresh stock one on.
thing is even though I have done that, it has still kept all the random folders on the internal storage, is there any way to clear them. PC companion says it will wipe them but it doesnt seem to have done so..
thanks
nat
xda-nat said:
finally success, managed to use flashtool to flash parts of the ftf at a time, left it charging overnight and booted up fine in the a.m.
then have just ran pc companion to get a fresh stock one on.
thing is even though I have done that, it has still kept all the random folders on the internal storage, is there any way to clear them. PC companion says it will wipe them but it doesnt seem to have done so..
thanks
nat
Click to expand...
Click to collapse
Backup everything you want to save to your pc, then format internal storage in settings
Glad to hear you have it working again

[Q] Xperia Z1 does not boot properly after firmware upgrade

Hey guys,
as I did not find any matching solutions to my problem (and due to the fact that I can't post within developer forums yet), I opened a new thread. If there has been similar questions like mine with working solutions, then I am sorry to doublepost the problem.
I have a Sony Xperia Z1, model number C6903. I rooted it today, following this method
http://www.youtube.com/watch?v=1aq9YTlfCgc
taken from this original post
http://forum.xda-developers.com/showthread.php?t=2572988
I followed the tutorial step by step, rooted the device properly (worked fine, checked with the root basic app checker or whatever its called), and then wiped all data from it using dualrecovery. After that, i put the .290 software onto my sd card and flashed my phone using dualrecovery - as the tutorial said. Finally, I used Flashtool to flash the C6903_14.2.A.0.290_Stripped.ftf onto my phone.
After this process finished, I wanted to boot my phone.
That was when things got weird: The sony logo appeared for a short time, and then it powered off / rebooted itself. Sony logo appeared again, switched off again and rebooted for another time. But it would not do any more than that... seems like its catched within an endless loop or something.
What I tried to solve this problem:
- enter dual recovery: this worked at the beginning, I could switch my phone off and get it out of the loop
- flashed it again (first with dualrecovery, then with flashtool)
- after that I could not even get into dual recovery mode
- then I tried to flash the .534 ftf firmware onto my device, because with that it worked properly after root. But every time I connected my phone within flashmode to my pc and started the flashprocess, my phone disconnected after a short time and booted into the endless loop again
I don't know what else to try, so I ask you guys for help. Should I leave the phone within the loop for a couple of hours hoping that it starts eventually? Should I try to flash again? Is there any other possibility to enter dual recovery? Should I maybe flash an original sony firmware on it?
Thanks in advantage for your help and time,
flamingo
It sound slike you did everything right, I would repair using pccompanion and start again. Make sure you do every step correctly and in order and don't miss anything
Let us know how you get on
gregbradley said:
It sound slike you did everything right, I would repair using pccompanion and start again. Make sure you do every step correctly and in order and don't miss anything
Let us know how you get on
Click to expand...
Click to collapse
Thanks for the very quick reply. I've just done that, and all went properly! I am now back on .136, and the device works perfect. Think I'll continue with the 4.4 Kitkat instead of the .290, as this did not work out all to well...
Thanks again for your quick and very good advice!
flamingo

[Q] Completely Dead

Hi
what i did.
I unlocked the Bootloader via Flashtool
Rooted the device
Installed TW Recovery.
Installed iHackers 4.
All was fine until i saw the i wasnt connected to my Network Provider .
AHH i forgot to flash "Xperia Z1 - C6903 - Kernel + Baseband [14.3.A.0.757].ftf"
So i went into flashtool and flashed it, excluding everything execpt Kernel and Baseband.
The flashtool finshed and the device shut down. And thats it. Since then nothing. Not even
the led or something is showing any lifesignal. I tryed every button combi. The red reset button.
Tryed to enter flashmode.. NOTHING!!! What the ?! ANy ideas what i can do?
Last time i checked the accu was @ 93 %. I have it now on the charger dock hoping it is just a battery issue. No combination (pwr+vol+ or pwr+vol- etc.) working so far.
thanx
Thomas
TommyX235 said:
Hi
what i did.
I unlocked the Bootloader via Flashtool
Click to expand...
Click to collapse
What is this?
Did you Backup TA? Did you followed this instructions HERE?
If you did not, then you was asking for troubles.
eclyptos said:
What is this?
Did you Backup TA? Did you followed this instructions HERE?
If you did not, then you was asking for troubles.
Click to expand...
Click to collapse
I started the Flashtool .. clicked on BLU and followed the instructions.
ANd the flashtool successfully unlocked the booloader
But thats not my problem. The Phone is dead.. I does not give
any lifesignes .. also the backup is useless if i cant get flashboot
or any way to use adb .. to work.
TommyX235 said:
I started the Flashtool .. clicked on BLU and followed the instructions.
ANd the flashtool successfully unlocked the booloader
But thats not my problem. The Phone is dead.. I does not give
any lifesignes .. also the backup is useless if i cant get flashboot
or any way to use adb .. to work.
Click to expand...
Click to collapse
Yes it is a problem.
Even in this Tutorial is all well explained that you have to use the OFFICIAL Sony way to unlock Bootloader,
http://forum.xda-developers.com/showthread.php?t=2440597
..you did not followed the instructions and you unlocked with Flashtool which probably did not do his job right.
Maybe I am wrong but this is how supposed to be to avoid issues.
Then you phone is bricked and you have to follow other instruction to check if still can be resurrected, there is many Threads on XDA about this.
TommyX235 said:
I started the Flashtool .. clicked on BLU and followed the instructions.
ANd the flashtool successfully unlocked the booloader
But thats not my problem. The Phone is dead.. I does not give
any lifesignes .. also the backup is useless if i cant get flashboot
or any way to use adb .. to work.
Click to expand...
Click to collapse
Well if you want to sell it then I might want it as my screen got cracked
Sent from my C6903 using XDA Premium 4 mobile app
TommyX235 said:
Hi
...
thanx
Thomas
Click to expand...
Click to collapse
Leave it on charge for 24 hours and then try turning it on.
Please let us know tomorrow if anything changes
eclyptos said:
Yes it is a problem.
Even in this Tutorial is all well explained that you have to use the OFFICIAL Sony way to unlock Bootloader,
http://forum.xda-developers.com/showthread.php?t=2440597
"..you did not followed the instructions and you unlocked with Flashtool which probably did not do his job right."
Maybe I am wrong but this is how supposed to be to avoid issues.
Then you phone is bricked and you have to follow other instruction to check if still can be resurrected, there is many Threads on XDA about this.
Click to expand...
Click to collapse
Wow i haven't thought that I get some nagging here instead of constructive suggestions. In any case i will let the phone on the charger for 24 hours and see if it helps. Also I DON'T THINK THIS IS A BOOTLOADER ISSUE!!! All worked fine.. I booted into ihackers 4 multiple times without any problems.. Also the Phone would show ANY signes of life, eg. LED RED or blinking etc..But nothing
ALSO:
"..you did not followed the instructions and you unlocked with Flashtool which probably did not do his job right."
In the "getting started" thread of z1 it is suggested to use the flashtool! And like i said .. it finished successfully..
Thank you for your answer and the nagging...
gregbradley said:
Leave it on charge for 24 hours and then try turning it on.
Please let us know tomorrow if anything changes
Click to expand...
Click to collapse
i'll give it a try! Thanx!
TommyX235 said:
Wow i haven't thought that I get some nagging here instead of constructive suggestions. In any case i will let the phone on the charger for 24 hours and see if it helps. Also I DON'T THINK THIS IS A BOOTLOADER ISSUE!!! All worked fine.. I booted into ihackers 4 multiple times without any problems.. Also the Phone would show ANY signes of life, eg. LED RED or blinking etc..But nothing
ALSO:
"..you did not followed the instructions and you unlocked with Flashtool which probably did not do his job right."
In the "getting started" thread of z1 it is suggested to use the flashtool! And like i said .. it finished successfully..
Thank you for your answer and the nagging...
Click to expand...
Click to collapse
Let us hear how it goes with it...
Sent from my C6903 using XDA Premium 4 mobile app
TommyX235 said:
"..you did not followed the instructions and you unlocked with Flashtool which probably did not do his job right."
In the "getting started" thread of z1 it is suggested to use the flashtool! And like i said .. it finished successfully..
Thank you for your answer and the nagging...
Click to expand...
Click to collapse
Ok, If you are so sure then Ok, but still weird, as I follow different instruction and never had a problem then people do on they way and later have problems. It can be a coincidence and maybe is not your case, but sometime thinking easy can compromise the whole process.
I flashed different patches on mine Kernel I kill my phone few times and mine was completely dead, no led nothing, but it boot into Flashmode or Fastboot, you have somehow go in that mode and flash again, this is the only soft solution.
If you will not be able to do so then you have to go with the Test Pins, open your back cover and try to resurrect it, the hard way.
eclyptos said:
Ok, If you are so sure then Ok, but still weird, as I follow different instruction and never had a problem then people do on they way and later have problems. It can be a coincidence and maybe is not your case, but sometime thinking easy can compromise the whole process.
I flashed different patches on mine Kernel I kill my phone few times and mine was completely dead, no led nothing, but it boot into Flashmode or Fastboot, you have somehow go in that mode and flash again, this is the only soft solution.
If you will not be able to do so then you have to go with the Test Pins, open your back cover and try to resurrect it, the hard way.
Click to expand...
Click to collapse
I don't understand what went wrong. After flashing the Kernel and Baseband the flashtool said everything went fine eand restarted the device. It turned off and nothing since then. I cant even get into flashboot or flashmode. It feels likt the accu is broken because there is nothing happening whatever i do. I think there is no power. I will not open the device because i still have 2 years of waranty (i hope they repair it as waranty case, if i am lucky) Else I will pay for the repair. We'll see. If this is an accu failure it should be a waranty case.
I had it for about 8 hours on the charger without any signs of "life" in the "machine". Sometimes i feel like trowing it against a wall to see if it reanimates it... But i can keep myself from doing it. =)
We'll see..
probably stupid guess: maybe ur phone just stucked on something and may not be completely switched off??
press vol+ and power button, see if ut vibrates 3 times
if it does, congrats an flash kernel again
TommyX235 said:
Hi
what i did.
I unlocked the Bootloader via Flashtool
Rooted the device
Installed TW Recovery.
Installed iHackers 4.
All was fine until i saw the i wasnt connected to my Network Provider .
AHH i forgot to flash "Xperia Z1 - C6903 - Kernel + Baseband [14.3.A.0.757].ftf"
So i went into flashtool and flashed it, excluding everything execpt Kernel and Baseband.
The flashtool finshed and the device shut down. And thats it. Since then nothing. Not even
the led or something is showing any lifesignal. I tryed every button combi. The red reset button.
Tryed to enter flashmode.. NOTHING!!! What the ?! ANy ideas what i can do?
Last time i checked the accu was @ 93 %. I have it now on the charger dock hoping it is just a battery issue. No combination (pwr+vol+ or pwr+vol- etc.) working so far.
thanx
Thomas
Click to expand...
Click to collapse
Is it getting red led when you try to charge it?
If not then its Sony's problem probably a faulty device. Send warranty and don't mention bootloader, root or ROM.
yup owns Z1 and stuff.
z1 completely dead
my z1 completely dead, I instaled hi hackers rom and went well after finishing flashing i did'nt get network of airtel and instaled baseband of 3rd party and it is completely dead nothing is working when i press volume+on button it vibrates 3 times thats it and nothing is displayed and when i put to the charge it shows red light and stops,can anbody help me out from this, please only 3 months old my z1 and sorry for my english ....and can anbody reply what to do next friends?
Hard reset.
Flash a stock FTF using flashtool.
If that does not work, leave it on charge overnight and try again tomorrow
gregbradley said:
Hard reset.
Flash a stock FTF using flashtool.
If that does not work, leave it on charge overnight and try again tomorrow
Click to expand...
Click to collapse
ok Dude i tried for flashing by pressing volume down button its not working .
while i try plug data cabel it will show blue led for a 2 seconds confirm its charging r i dont know? OK
I will try keeping overnight charge and i will try tomorrow. Thanks
---------- Post added at 09:20 PM ---------- Previous post was at 09:08 PM ----------
eclyptos said:
Ok, If you are so sure then Ok, but still weird, as I follow different instruction and never had a problem then people do on they way and later have problems. It can be a coincidence and maybe is not your case, but sometime thinking easy can compromise the whole process.
I flashed different patches on mine Kernel I kill my phone few times and mine was completely dead, no led nothing, but it boot into Flashmode or Fastboot, you have somehow go in that mode and flash again, this is the only soft solution.
If you will not be able to do so then you have to go with the Test Pins, open your back cover and try to resurrect it, the hard way.
Click to expand...
Click to collapse
how to use Test pins procedure by opening back cover give me the details?
srichinu said:
how to use Test pins procedure by opening back cover give me the details?
Click to expand...
Click to collapse
There is no test point on 2013+ devices
Try again in the morning and let me know how you get on, I will help you then
gregbradley said:
There is no test point on 2013+ devices
Try again in the morning and let me know how you get on, I will help you then
Click to expand...
Click to collapse
Ok sir i kept for charge for more than 6 hours but i think nothing charged i tried by all methods by volume+ and on button,flash mode by connecting data cabel by pressing volume down as a flash but still it is in same condition. please advice me what to do next.
thanks?
Go through the process of flashing a FTF and please post the output of flashtool here.
Sony PC Companion
Have you try Sony PC Companion program?

help with fastboot for newbie

i have xperia zr cc5502 with 5.1.1 stock installed on it
i have tried to follow CM tutorial on thier site wiki.cyanogenmod.org/w/Install_CM_for_yuga
but when im trying to do fastboot im getting waiting for device's and i do have fastboot installed via android studio
and i managed to get my phone into fastboot mode(blue notification light)
thanks
Did you install the relevant drivers for the ZR? Easiest way to do this would be by installing Flashtool (by Androxyde), which includes a GUI for flashing images via fastboot.
SirVer said:
Did you install the relevant drivers for the ZR? Easiest way to do this would be by installing Flashtool (by Androxyde), which includes a GUI for flashing images via fastboot.
Click to expand...
Click to collapse
i have downloaded the program
i looked online to how to get scatter-loading file
and when i followed the instruction
its says i dont have mtd file or emmc
also i tired to follow the guide here developer.sonymobile.com/unlockbootloader/imei-verification/79e3de6c1cdcb72796f5497654fe1c6769602ea35174b9a25be5cab6f6d90919f8448ef693675ac8fd8b9aa0a0520820d90f6e15c7efd5b0934255d1b7f3ec95
but when i type fastboot devices
i get nothing i return (although i can see the blue light )
That's because you don't have the drivers installed. And I didn't mean SP Flashtool - that's for MediaTek devices. We use Flashtool by Androxyde (Google it) for Xperia devices, and it's a lot less difficult to use (no scatter files, for example). There are several guides on XDA for Flashtool, look for one. In those guides, you'll see how to install the drivers. Also, Flashtool can unlock your bootloader without wiping the internal data or anything, so it's preferable to the normal way.
SirVer said:
That's because you don't have the drivers installed. And I didn't mean SP Flashtool - that's for MediaTek devices. We use Flashtool by Androxyde (Google it) for Xperia devices, and it's a lot less difficult to use (no scatter files, for example). There are several guides on XDA for Flashtool, look for one. In those guides, you'll see how to install the drivers. Also, Flashtool can unlock your bootloader without wiping the internal data or anything, so it's preferable to the normal way.
Click to expand...
Click to collapse
okay i followed the instructions and it said everything went successfully
but from some reason the light switched from blue to red and then no light and now i cant enter any mode(fastboot or recovery)
i used the the instructions here orum.xda-developers.com/showthread.php?t=2658952
edit: if i pull out the battery and then turn it back in and then press the power button it vibrates for a second
edit 2: the phone began to heat up,now it's very hot and it's connected to anything
That's odd... Please state exactly what you did, what you flashed (if you did flash something), and if possible, the Flashtool output for the operations.
SirVer said:
That's odd... Please state exactly what you did, what you flashed (if you did flash something), and if possible, the Flashtool output for the operations.
Click to expand...
Click to collapse
i just gave it to some phone lab and they fixed it
styxxer said:
i just gave it to some phone lab and they fixed it
Click to expand...
Click to collapse
Nice. ?
Did they tell you what the problem was? How much did it cost you?
SirVer said:
Nice.
Did they tell you what the problem was? How much did it cost you?
Click to expand...
Click to collapse
it coast 51.12$ and they said there was a problem with the fastboot:angel:
Woah, $50?! The only way I can think of that justifies $50 for that repair would be if the motherboard was f**ked up and they had to replace it. If that's what happened, then congratulations; most phones don't recover from motherboard damage. ?
SirVer said:
Woah, $50?! The only way I can think of that justifies $50 for that repair would be if the motherboard was f**ked up and they had to replace it. If that's what happened, then congratulations; most phones don't recover from motherboard damage.
Click to expand...
Click to collapse
i dont know what they did,but im glad it's working
also i see when the phone starts up the Entel logo(which is Chilean telecommunications company), can you tell why?
Sounds like your phone magically became carrier customized, which probably means the motherboard was replaced, or a new bootloader/ROM specific to that carrier was flashed.
Thanks for help
Sent from my Lenovo K50a40

Categories

Resources