Related
Ok, so pretty much just as I did with my iPhone 5. Had the HTC One since last Friday, I have protected it so well however.....
I was just about to get out of the car and slotted the phone into my shirt pocket under my jumper, got out of the car and slap, the phone obviously wasn't in my pocket, hence it was on the pavement. Soooo gutted right now.
Damage to 3 corners of the back case, front is perfect luckily and the screen is undamaged at all. All works perfectly, however I am sooo annoyed with myself.
Will post a picture up in a bit, I will sell this on now and get another I think. Any idea of what it's worth? Sim Free bought from Phones 4U.
djayyy said:
Ok, so pretty much just as I did with my iPhone 5. Had the HTC One since last Friday, I have protected it so well however.....
I was just about to get out of the car and slotted the phone into my shirt pocket under my jumper, got out of the car and slap, the phone obviously wasn't in my pocket, hence it was on the pavement. Soooo gutted right now.
Damage to 3 corners of the back case, front is perfect luckily and the screen is undamaged at all. All works perfectly, however I am sooo annoyed with myself.
Will post a picture up in a bit, I will sell this on now and get another I think. Any idea of what it's worth? Sim Free bought from Phones 4U.
Click to expand...
Click to collapse
Wooowww I feel so bad for u mate. Unlucky! I dropped mine the first day I got it but it was inside on wood flooring. Nothing happened to it though. Pictures of yours would be good, ugh again unlucky
Sent from my HTC One using xda premium
yvibes said:
Wooowww I feel so bad for u mate. Unlucky! I dropped mine the first day I got it but it was inside on wood flooring. Nothing happened to it though. Pictures of yours would be good, ugh again unlucky
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
The last image is the worse i think. So, whats the going rate for a HTC One with this damage to the back case? Offers?
Sorry about your phone. the last picture should be censored it looks so bad like you tried to drill through it or something
ichi2k said:
Sorry about your phone. the last picture should be censored it looks so bad like you tried to drill through it or something
Click to expand...
Click to collapse
Haha looks awful don't it. I feel like smashing it up.
djayyy said:
The last image is the worse i think. So, whats the going rate for a HTC One with this damage to the back case? Offers?
Click to expand...
Click to collapse
Mine's not as bad as yours, and i just payed £320. My son has mugged me for my pristine one and i have the dinged one for work.
Sent from my HTC One using xda app-developers app
randombirt said:
Mine's not as bad as yours, and i just payed £320. My son has mugged me for my pristine one and i have the dinged one for work.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
You paid £320 for the dinged one?
I am not taking my phone out without buying a case after seeing this.
Sorry for your phone.
You could buy a replacement housing?
http://www.etradesupply.com/htc/android-models/htc-one-m7.html
Edit: Out Of Stock
Dharkan said:
I am taking taking my phone out without buying a case after seeing this.
Sorry for your phone.
Click to expand...
Click to collapse
Just to say the double dip hard case has just turned up today
djayyy said:
You paid £320 for the dinged one?
Click to expand...
Click to collapse
Yep, it'll have a few more dings in a couple of months so for 320 i felt it was a good deal. And i got the multi coloured case thrown in.
Sent from my HTC One using xda app-developers app
I feel sorry for your phone man. Anyway, does the back side of the phone the aluminium part i mean is easy to get scratches? I heard that iphone 5 the back side also using aluminium is easy to get scratches.
I don't think the back of the one will scratch easily. The back was the least damaged from that fall just a tiny nick that was all.
Sent from my HTC One using xda premium
OK gotta be realistic here. Plastic are ugly but definitely it wouldn't cause those huge dents. That's the good side of plastic lol
Sent from my GT-I9300 using Tapatalk 2
tha was early. sorry bout your phone man. that a real pain with unibodies when dropped. i gues that why samsung sticks with the plastic bodies.
Btw, we see the advantage and disadvantage between Iphone 5 and Htc One here.
Iphone 5 gets stratched very easily. HTC One does not.
But on the other hand, they take dropping better than HTC One, both will suffer stratches but HTC One is more fragile that Iphone 5 it seems.
Well based on what I have seen I could easily say that nokia n8 still has the best anodized case to date. That thing is just so hard you can't even scratch it easily even if you hammer it with a knife.
Riyal said:
Well based on what I have seen I could easily say that nokia n8 still has the best anodized case to date. That thing is just so hard you can't even scratch it easily even if you hammer it with a knife.
Click to expand...
Click to collapse
Its a Nokia what do you expect?
Sent from my HTC One X using Tapatalk 2
Sorry for your drop test, maybe pics useful to case manufacturers,
I was risking going without case before but not any more.
Just got to find a case I'm happy with, the official flip case has not had good reviews.
Here's the deal, I had an iPhone 3gs long time ago. That shiny metal frame around the screen was just not for me. I tought : "Why not brush this thing up?" I asked my friend Google (maybe in 2009) and did it. Just amazing.
What do you guys think about doing that on the nexus 4 ?
file it down to black maybe.. mines already dented.. looks really ugly! unless i paint it 0.0
If you want to, go for it. I'm also one of those that took some sandpaper to the chrome bezel because I also thought it was always scuffed pretty bad after normal use, and after doing that it looked awesome. Also helped with the resale value back when I got my first android device (Infuse 4G).
Main thing about the N4 though, to its benefit the shiny trim is a dark chrome, which imo looks right, plus mine is covered up by my case for the time I had it thus far and she hasn't got beat up too bad yet.
I say go for it, if it looks sweet, you'll probably be the founder of this technique and have a bunch of people follow. If not, it'll still be unique.
Result
I did a little bit at the corner just to see how is it under the chrome. I'm sad it's plastic. Anyway here are some pics of how it looks like under the
https://docs.google.com/file/d/0BxQ1eQGIPLftcVRCRmx6cTBHdzA/edit?usp=sharing
https://docs.google.com/file/d/0BxQ1eQGIPLftUE5UaGIzVG1qTUE/edit?usp=sharing
Why would you want to screw up such a shinny bazel?
Sent from my Nexus 4 using xda premium
Underground_XI said:
Why would you want to screw up such a shinny bazel?
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
I thougt it was an aluminium frame. I prefer brushed or anodised aluminium. That's what I did with my old iPhone 3GS long time ago, it was beatiful.
:thumbdown:
Sent from my Nexus 4 using Tapatalk 2
I think it will sorta ruin the look''' maybe file it down to black? Because the chrome on the nexus 4 looks nice and fitting but if its dented or scratched like mine. You could try
Sent from my Nexus 4 using xda app-developers app
you can tell something is metal or not from the temperature difference, the bezel is plastic because its not cold, aluminum would be especially cold
ouch that looks horrible.. worse than any minor scratching/nicks you might have already had.. now it looks like garbage
idividebyzero said:
you can tell something is metal or not from the temperature difference, the bezel is plastic because its not cold, aluminum would be especially cold
Click to expand...
Click to collapse
Damn, you're right, forgot this "detail". Prick I am.
ingenious247 said:
ouch that looks horrible.. worse than any minor scratching/nicks you might have already had.. now it looks like garbage
Click to expand...
Click to collapse
Dude, wait! it's only a little corner I didn't sand papered all the frame.
eh.. just do the whole thing now and give it a custom paint job.
like red and then get the red leather dbrand skin for the back.. something like that
Dropped my phone, bezel down from about 1 metre. Totally squashed the bezel, my phone has a 'lip' now, thanks to the bezel that got squashed. Great way to protect my front camera
I always thought of Rhino-lining a phone, but I never got around it.
ismethajametovic said:
I always thought of Rhino-lining a phone, but I never got around it.
Click to expand...
Click to collapse
What do you mean about rhino-lining ?
There's this company that makes super tough protectors, it's called Rhino-something. It's so tough that it protects against drops and glass cracking and all.
I think so.
ismethajametovic said:
I always thought of Rhino-lining a phone, but I never got around it.
Click to expand...
Click to collapse
After a little research : http://forum.xda-developers.com/showthread.php?t=753781
Man, are you kiding ?
That's what people use as an alternative to protect their trucks bed instead of the plastic liner. Its what I got in mine(different brand). I've seen a truck had the whole paint job done with it... looks closer to a slight textured matte finish. The phone in that link was crap. If you do want something like this on your phone, look for the ones than have less texture/clumps. Speedliner is smoother and they also sell spray cans of that stuff at the auto parts store.
fegone said:
After a little research : http://forum.xda-developers.com/showthread.php?t=753781
Man, are you kiding ?
Click to expand...
Click to collapse
Looks dope to me. Now, that thing can survive an nuclear blast.
ismethajametovic said:
Looks dope to me. Now, that thing can survive an nuclear blast.
Click to expand...
Click to collapse
so can this, and it doesn't look nearly as awful!
yeah, bulk is definitely added, but if you're that worried about protecting your phone, it's worth it.
Hi,
I was just inserting a sd card when I discovered some cracks at the bottom of the frame.
Does everybody has this?
See pics:
Also could anybody tell me it is normal that the tooth in the backcover in the red circle is missing, compared to the thoots in the green circles?
Thnx
Furrrrr said:
Hi,
I was just inserting a sd card when I discovered some cracks at the bottom of the frame.
Does everybody has this?
See pics:
Click to expand...
Click to collapse
Doesn't seem like cracks. Looks like fusing of plastic and aluminum was not perfect, but nothing to worry about.
Sent from my SM-N910W8
Just checked mine. It looks almost exactly like yours
Sent from my SM-N910T using XDA Free mobile app
For the cracks at the bottom, mine as same as yours and it looks like the draw lines.
HOWEVER, for yours second picture about the tooth (red circle). Yes you are missing 3 right there
mine is also like yours and the others, i think i normal because everybody have it
Well.. called my Local Phone shop and will receive a new back cover. But the cracks.. it should not crack and I think it is a HUGE design flaw.. even more so when more note 4's have the same cracks. A 780+ euro should not crack! Dont get me wrong.. I love the note 4.. And maby there is a little samsung fan boy with in me, but this, I just can not accept this.
I wouldn't call that a crack, it's at the point where metal frame is molded onto plastic chassis, I'd say it's expected to split due to the heat and etc.
Everyone has that on the bottom I think it's normal
Furrrrr said:
Well.. called my Local Phone shop and will receive a new back cover. But the cracks.. it should not crack and I think it is a HUGE design flaw.. even more so when more note 4's have the same cracks. A 780+ euro should not crack! Dont get me wrong.. I love the note 4.. And maby there is a little samsung fan boy with in me, but this, I just can not accept this.
Click to expand...
Click to collapse
Again, you do know that, that plastic and the metal frame are one piece? They don't come apart. In the process of fusing plastic to the aluminum, there are some tolerances, especially considering that it is under the cover.
When you say crack, one assumes, it developed after the purchase. I would probably assume you bought it like that.
And no, all back covers are supposed to be like that.
Just return your phone please. Thanks.
Sent from my SM-N910W8
Idan73 said:
And no, all back covers are supposed to be like that.
Just return your phone please. Thanks.
Sent from my SM-N910W8
Click to expand...
Click to collapse
What ever, take a look at this back cover... still has the tooth.. compare it with the pic in the 2nd post..
So it is NOT supposed to be like that!!
Furrrrr said:
What ever, take a look at this back cover... still has the tooth.. compare it with the pic in the 2nd post..
So it is NOT supposed to be like that!!
Click to expand...
Click to collapse
So what? You probably broke it by removing it and putting it back on again. Just buy another back cover, they're cheap.
iR¡[email protected]!* from i9505 via Tapatalk 4
The back cover wasnt the problem.. was just checkin.. and i didnt broke.. sure about that.. the tooth did not break off.. its a molding issue.. but again.. that is solved and wasnt that big off an issue.. The cracks in t phone it self was the issue. But thnx
Furrrrr said:
The back cover wasnt the problem.. was just checkin.. and i didnt broke.. sure about that.. the tooth did not break off.. its a molding issue.. but again.. that is solved and wasnt that big off an issue.. The cracks in t phone it self was the issue. But thnx
Click to expand...
Click to collapse
I understand what you say but everybody has it so I think it's normal
Think the cracks are there on purpose. I think I read somewhere that its for the antenna.
posted via my Obsidian VZW Note 4
how can one expect such flaws from an $800 phone?!
masammut said:
how can one expect such flaws from an $800 phone?!
Click to expand...
Click to collapse
This!
Furrrrr said:
This!
Click to expand...
Click to collapse
Dude. You're just bumping thread to try to stay relevant. It is normal, it is hidden under cover, and has no bearing on the look and function of the phone. Does not get worse. Give it a rest. Replace your freakin phone already. Sell it. Throw it in a garbage.
Btw if you started disassembling body of most of the products, I bet you'll find imperfections that are not detrimental and are generally not visible until disassembled.
Sent from my SM-N910W8
Okay, seriously? This is like being upset that the undercarriage of your car is not painted to match the exterior. Get a ****ing grip!
Got my replacement note 4 a few days ago,and noticed that the metal bezel sits a little bit higher off the glass on one side then the other,was wondering if this is a normal ,and by off the glass referring to metal lip around glass,not a huge deal,but...None the less it's there.
Your saying that the metal trim....is thick? As in its raised a couple mm? Mine Has It Straight All around....Not Going Above Or Unto Of The glass.
Lol I mean the metal trim raises above the glass,but not evenly.
Yea it's raised above the glass....but evenly lol BRO just enjoy your phone already don't dwell on it bro
Raver27 said:
Got my replacement note 4 a few days ago,and noticed that the metal bezel sits a little bit higher off the glass on one side then the other,was wondering if this is a normal ,and by off the glass referring to metal lip around glass,not a huge deal,but...None the less it's there.
Click to expand...
Click to collapse
If it is a refurbished device I would send it back. Might of been put together wrong and down the road you don't wanna get the blame .
BAD ASS NOTE 4
Here some pics,not the greatest being taken with nexus 4,I mean it's just a little off,but off none the less.
Raver27 said:
Here some pics,not the greatest being taken with nexus 4,I mean it's just a little off,but off none the less.
Click to expand...
Click to collapse
Dude I think that's your "gap". Every note 4 has one. it isn't that much a problem like I thought I'd be. I clean my screen all the time hate fingerprints and smugness but I'd say it's "normal" according to the Galaxy Note 4 manual.
Here's 1 more pic,little clearer I guess..
I wouldn't worry about it unless you work outside
nano303 said:
I wouldn't worry about it unless you work outside
Click to expand...
Click to collapse
Dont worry least your whites dont have hue of pink and yellow to them.
Nah...my first 2 did tho..I feel ur pain on that one,I didn't even want to use my first 2 because of pink hue.
yeah mine has that slight offset. It's the screen that is uneven. Not the frame. It no biggie for me tho. Enjoy your Note 4. Try not to let it bother you.
princeasi said:
yeah mine has that slight offset. It's the screen that is uneven. Not the frame. It no biggie for me tho. Enjoy your Note 4. Try not to let it bother you.
Click to expand...
Click to collapse
Yea I am trying, I kinda thought it was the glass for whatever reason, not sure how..Glad to know I'm not the only one tho,makes it into more of a common deal with this phone.
nano303 said:
Yea it's raised above the glass....but evenly lol BRO just enjoy your phone already don't dwell on it bro
Click to expand...
Click to collapse
Lol not dwelling, was curious..
Raver27 said:
Here some pics,not the greatest being taken with nexus 4,I mean it's just a little off,but off none the less.
Click to expand...
Click to collapse
You know that saying, if you go looking for something..... (Yet they say don't go look for love) anyways lol I don't see anything, looks like you want something to be wrong. It's a insurance replacement, the device isn't doing to be fresh, unless you want to dorms $700
Sent from my SHIELD Tablet using Tapatalk
Lol I here ya,I here ya...Was curious to know weather it's common deal..Tried phone info app,not sure how accurate, but it says phone is "original " not refurbished. .
Raver27 said:
Lol I here ya,I here ya...Was curious to know weather it's common deal..Tried phone info app,not sure how accurate, but it says phone is "original " not refurbished. .
Click to expand...
Click to collapse
Little physical imperfections like that are pretty common with all phones. My Note 4 has a slightly loose power button, my Nexus 5 screen was about a millimeter higher on one side than the other...
Unless it's really causing an issue for you I wouldn't worry about it.
I can live with Minor imperfections like this since I trade up phones ever year but screen issues are a big No No for me. God gifted me with 21-21 vision.
Sent from my SM-N910T using Tapatalk
Limeybastard said:
I can live with Minor imperfections like this since I trade up phones ever year but screen issues are a big No No for me. God gifted me with 21-21 vision.
Sent from my SM-N910T using Tapatalk
Click to expand...
Click to collapse
Lol ,so u could deal with my slight imperfection?
Raver27 said:
Lol ,so u could deal with my slight imperfection?
Click to expand...
Click to collapse
Yours or the phones?
Sent from my SM-N910T using Tapatalk
Like the title says, I have a blue one, wanting to change over to a white...here are the parts:
http://www.etradesupply.com/motorola-nexus-6-middle-plate-white.html
http://www.etradesupply.com/motorola-nexus-6-battery-door-cover-24205.html
Curious if anyone has done this before. I've seen teardowns and I've done something similar to this on a Nexus 5.
stevew84 said:
Like the title says, I have a blue one, wanting to change over to a white...here are the parts:
http://www.etradesupply.com/motorola-nexus-6-middle-plate-white.html
http://www.etradesupply.com/motorola-nexus-6-battery-door-cover-24205.html
Curious if anyone has done this before. I've seen teardowns and I've done something similar to this on a Nexus 5.
Click to expand...
Click to collapse
I swapped backs to get rid of the "ghost image" of the AT&T logo. It was easy. Only took about 10 minutes.
cam30era said:
I swapped backs to get rid of the "ghost image" of the AT&T logo. It was easy. Only took about 10 minutes.
Click to expand...
Click to collapse
Awesome, I ordered the middle plate (has the bezel and holds the internal battery) and the white battery cover. This will turn the phone from the blue variant to the white variant completely...all for about $60.
stevew84 said:
Awesome, I ordered the middle plate (has the bezel and holds the internal battery) and the white battery cover. This will turn the phone from the blue variant to the white variant completely...all for about $60.
Click to expand...
Click to collapse
I just did this on Monday of this week. I got my parts from eBay. You will still need to order the silver/white sim tray which I also found on eBay.
In addition I went with the Moto X Pro back instead of the white one.
bp328i said:
I just did this on Monday of this week. I got my parts from eBay. You will still need to order the silver/white sim tray which I also found on eBay.
In addition I went with the Moto X Pro back instead of the white one.
Click to expand...
Click to collapse
Whats the moto X pro? and damnit about the sim tray.
stevew84 said:
Whats the moto X pro? and damnit about the sim tray.
Click to expand...
Click to collapse
It's basically the Nexus 6 but it's sold in China and the back does not say Nexus on it and its black with a soft touch feel to it. Give me a minute and I'll post up some pictures of my phone.
Sent from my Nexus 6 using XDA Free mobile app
bp328i said:
It's basically the Nexus 6 but it's sold in China and the back does not say Nexus on it and its black with a soft touch feel to it. Give me a minute and I'll post up some pictures of my phone.
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
Damnit, so does it feel something like the black Nexus 5? that weird soft/gel type feel?
Also, looking at the middle plate that I ordered and it seems like I only need to swap out the camera and a couple of other things. The small delicate pieces seem to come with the new housing. The battery being the biggest thing to have to remove, should go smoothly tho since I'm not separating the digitizer from the front glass.
Did you have any hiccups or anything like that?
Oh, I have a white Moto X and it looks like the sim tray is the same part number as the tray of the Nexus 6, so I'll just swap them over. Where did you find the replacement battery cover for the Moto X Pro?
stevew84 said:
Damnit, so does it feel something like the black Nexus 5? that weird soft/gel type feel?
Also, looking at the middle plate that I ordered and it seems like I only need to swap out the camera and a couple of other things. The small delicate pieces seem to come with the new housing. The battery being the biggest thing to have to remove, should go smoothly tho since I'm not separating the digitizer from the front glass.
Did you have any hiccups or anything like that?
Oh, I have a white Moto X and it looks like the sim tray is the same part number as the tray of the Nexus 6, so I'll just swap them over. Where did you find the replacement battery cover for the Moto X Pro?
Click to expand...
Click to collapse
Here are the pictures of before and after.
Here is the link the the back I bought, I ordered the black one and yes it's almost like the Nexus 5
http://www.ebay.com/itm/Housing-Battery-Back-Cover-Rear-Door-For-Google-Nexus-6-XT1100-Motorola-Shamu-/251723199982?pt=LH_DefaultDomain_0&var=550648934210&hash=item3a9bdf35ee
And here is a link to the sim tray I bought.
http://www.ebay.com/itm/271876699768?_trksid=p2057872.m2749.l2649&var=570713175240&ssPageName=STRK%3AMEBIDX%3AIT
I had no issues at all doing the swap.
bp328i said:
Here are the pictures of before and after.
Here is the link the the back I bought, I ordered the black one and yes it's almost like the Nexus 5
http://www.ebay.com/itm/Housing-Battery-Back-Cover-Rear-Door-For-Google-Nexus-6-XT1100-Motorola-Shamu-/251723199982?pt=LH_DefaultDomain_0&var=550648934210&hash=item3a9bdf35ee
And here is a link to the sim tray I bought.
http://www.ebay.com/itm/271876699768?_trksid=p2057872.m2749.l2649&var=570713175240&ssPageName=STRK%3AMEBIDX%3AIT
I had no issues at all doing the swap.
Click to expand...
Click to collapse
Awesome, thanks. So you didn't swap out the actual bezel piece?
stevew84 said:
Awesome, thanks. So you didn't swap out the actual bezel piece?
Click to expand...
Click to collapse
Yes I did, in the first picture it's blue and the second picture it's white/silver.
Here is the link to the frame I bought.
http://www.ebay.com/itm/351333448156?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
This weekend I'm going to switch back to the one that was once blue because I've done this to it.
Polished aluminum!
bp328i said:
Yes I did, in the first picture it's blue and the second picture it's white/silver.
This weekend I'm going to switch back to the one that was once blue because I've done this to it.
Click to expand...
Click to collapse
Ohhh you did the polishing thing? That's awesome. What all did you have to transfer over from your complete middle plate to the new white plate? I'll be able to tell once I get my hands on it but it would be nice to know what to expect.
If there was a way to flat black the entire bezel, I'd be down for that. Similar to the black HTC one.
stevew84 said:
Ohhh you did the polishing thing? That's awesome. What all did you have to transfer over from your complete middle plate to the new white plate? I'll be able to tell once I get my hands on it but it would be nice to know what to expect.
If there was a way to flat black the entire bezel, I'd be down for that. Similar to the black HTC one.
Click to expand...
Click to collapse
If I remember correctly it was just the battery, the top speaker, and the camera glass.
Battery was the hardest part as the other two just pop out.
bp328i said:
If I remember correctly it was just the battery, the top speaker, and the camera glass.
Battery was the hardest part as the other two just pop out.
Click to expand...
Click to collapse
Thanks. I'll update when I get the parts.
Sent from my Nexus 6 using XDA Free mobile app
bp328i said:
If I remember correctly it was just the battery, the top speaker, and the camera glass.
Battery was the hardest part as the other two just pop out.
Click to expand...
Click to collapse
Hey did you have an issue with the adhesive on the back cover? meaning did your replacement back come with adhesive already attached? I've seen that you can purchase the adhesive separately so I wasn't sure if it comes with the cover.
stevew84 said:
Hey did you have an issue with the adhesive on the back cover? meaning did your replacement back come with adhesive already attached? I've seen that you can purchase the adhesive separately so I wasn't sure if it comes with the cover.
Click to expand...
Click to collapse
Mine came with the adhesive already attached. It is a real pain in the a$$ to get the stock one off. I use a heat gun to warm it up a little and it helped a lot!
At first I thought it might be tough to line the new one up on the first try but it was easy. I pulled off the adhesive backing fully and then lined the top up with the camera hole and it went down fine.
bp328i said:
Mine came with the adhesive already attached. It is a real pain in the a$$ to get the stock one off. I use a heat gun to warm it up a little and it helped a lot!
At first I thought it might be tough to line the new one up on the first try but it was easy. I pulled off the adhesive backing fully and then lined the top up with the camera hole and it went down fine.
Click to expand...
Click to collapse
Thanks for the tips man.
Sent from my Nexus 6 using XDA Free mobile app
stevew84 said:
Thanks for the tips man.
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
I wish I found this video before I did mine because getting the back started was the hardest part for me.
https://youtu.be/Yk1CGk0TZAw
Sent from my Nexus 6 using XDA Free mobile app
Don't forget the Sim tray.
bp328i said:
I wish I found this video before I did mine because getting the back started was the hardest part for me.
https://youtu.be/Yk1CGk0TZAw
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
dhollis72 said:
Don't forget the Sim tray.
Click to expand...
Click to collapse
All of the parts came in the mail yesterday, so that's the middle plate, tools and white back battery cover (with adhesive attached). I went through TMO to get yet another warranty replacement since my power button is kind of wonky, so I'll have a couple of N6's to take apart and compare to make sure things are done correctly.
Thanks for the tips.
stevew84 said:
All of the parts came in the mail yesterday, so that's the middle plate, tools and white back battery cover (with adhesive attached). I went through TMO to get yet another warranty replacement since my power button is kind of wonky, so I'll have a couple of N6's to take apart and compare to make sure things are done correctly.
Thanks for the tips.
Click to expand...
Click to collapse
I was going to wait to switch to my polished aluminum frame until I got another back because I when I took my stock blue one off I scratched it up a bit.
But since I found that video I went ahead and switched the frames out again before the other back I ordered came.
I don't think I have ever received so many compliments on a phone (and I've had almost every flagship phone) as I have on my Nexus 6 with the polished aluminum frame and Moto X Pro back.