Hi Guys,
i have a problem with sync time of my Lg Watch(Italy)...when I sync watch with phone time is ciorrect...but if i disconnect from bluetooth and turn off watch, after i return on, time is different...only if i re-sync with phone return correctly.
Are there a root command to set time defnitely correct?
Regards
Ciccio80
Normal, watch take his hour from phone. If you want keep hour you must only restart but not shutdown.
Otherwise, hour sync as soon as watch connect to phone.
Hi,
in Moto 360 it's not so... i can turn off and when i turn on i can not sync with phone and watch maintain time without problem...
if you have another trick...
Regard
Ciccio80
I have the same issue with my LG G Watch R. I had a Sony Smartwatch 3 before and didn't had this problem at all. So this seems specific to the LG...
Related
I will enter a date or appointment and with in a few minutes it is gone! This has happened several-MANY times, even after I have removed the battery, and sim turned the phone on and off..Have any of you had this problem and how to correct it? Thank you,
Are you syncing with another application? Which?
Do you have bluetoothe syncing enabled - and - is it active in your calendar sync?
Does it happen randomly or only when you enter a date or appointment?
Has this happenned from when you first bought your device - or - did it begin after an update or an additional application addition?
Peace-
calander
My apts are always entered as corp. apts for my corp exchange account. This acct is set to sync every 15 minutes during the day. This is how I keep track of my time and post it to my server for accounting and billing. This didnt start happening until I had had the phone for about 2 months. Now it occurs randomly. My sync is via wiFi or At&t data link. I dont use Blue tooth. Things will work fine for several days then one day decide not to for a while. I had sat there and entered a service call 3 and 4 times only to watch it dissappear within 5 minutes. Turning the phone off, taking the battery out might fit it or might not. Then it will start working again. The next day it will work for sure. Phone has been replaced once with the same problems. I have very few apps as this is mostly a phone and time keeping tool for me.
Thank you for your help
Reset device or full wipe do not help. Phones not see watch. Please help!!!
Go in parameter to enable ?
Where to look? I can not find.
With the screen on, hold the button in. That will bring up different settings
fr0st420 said:
With the screen on, hold the button in. That will bring up different settings
Click to expand...
Click to collapse
The first paragraph of brightness. The second device. Item no bluetooth. Paragraph device shows "Bluetooth is currently disabled"
Check if Airplane mode is not activated in parameter.
dersie said:
Check if Airplane mode is not activated in parameter.
Click to expand...
Click to collapse
I have the same problem. All started with the HTC One M7 problems with no audio during calls.
Did Full Wipe on the phone, reinstalled, finally got it working but couldn't connect the watch to Android Wear.
Restored Android Watch and data with Titanium but still nothing.
Finally read that you have to reset the watch. Did that and now I'm stuck on the "Install Android wear on your phone" screen.
I've tried connecting to the watch with different phones without any success..none of the phones sees the watch.
If I push the crown I get the settings page with only the following options:
Adjust Brightness
Bluetooth Devices - which shows: Bluetooth is currently disabled)
Always on Screen
Power off
Restart
Reset device
About
no place to check the airplane mode...nothing.. It's like there should be a "switch" to start the bluetooth somewhere..
any ideas greatly appreciated. For the moment I have a nice black thing on my watch which isn't doing anything..
[email protected] screen
If don't works with any phone maybe it is time to RMA ?
dersie said:
If don't works with any phone maybe it is time to RMA ?
Click to expand...
Click to collapse
RMA? What does that stand for?
[email protected]
depeche101 said:
RMA? What does that stand for?
[email protected]
Click to expand...
Click to collapse
I have exactly the same problem. If you frequently press device. Bluetooth is activated for 3-5 minutes. Watch are charged watchfase. That's all. Off. :crying:
RMA Return Merchandise Authorization
Not variant. Ebay shop.
Same Problem
I am having the same problem. Right now my LG G Watch R is useless. I wonder if it was on airplane mode before I factory restore it and that is what is causing the problem.
taastar said:
I have exactly the same problem. If you frequently press device. Bluetooth is activated for 3-5 minutes. Watch are charged watchfase. That's all. Off. :crying:
RMA Return Merchandise Authorization
Not variant. Ebay shop.
Click to expand...
Click to collapse
my case exctly... nice black piece...
The problem of overheating.
Harvesting hours in the refrigerator for 10 minutes.
Gat. Bluetooth works. Has not yet warmed up.
Then off again.
taastar said:
The problem of overheating.
Harvesting hours in the refrigerator for 10 minutes.
Gat. Bluetooth works. Has not yet warmed up.
Then off again.
Click to expand...
Click to collapse
BUMP
Anyone? No ideas whatsoever?
I did try the fridge thing...Worked once so I could pair the phone but didn't even sync.
Tried again with no success.
dep
Well I have an update. I honestly don't know what has changed...but my watch works again. Having the occasional connection lost problem as reported by many in the new 5.0 update in the watch but nothing too serious.
Anyway, reset your watch. Forget the watch in the Android wear app (or delete data and clear cache), but also delete the paired watch from the phones bluetooth menu.( BTW: I deleted all my paired devices in the phones bluetooth menu and then paired the watch first, don't know if this affected or not, if all else fails you can try this also).
Then turn off bluetooth from your phone. Start Android wear app and let it turn on bluetooth. THis way I can pair my phone. Whenever the watch loses connection to the phone and doesn't reconnect toggle bluetooth off and on from the phone and it works again.
Perhaps it's because the watch is already on Lollipop and the phone not yet...
dep
depeche101 said:
Perhaps it's because the watch is already on Lollipop and the phone not yet...
dep
Click to expand...
Click to collapse
I haven't had any issues and my T-Mo G3 is still on Kit-Kat.
Best practice if pairing gets wonky or whatever, is exactly what you did. Clear / Forget all pairings. Turns everything off. Turn phone on, enable BT, run Android Wear, turn on Watch - wait - follow regular steps and everything should be golden.
If it's still not working, try a reset on the Watch - if it's still won't work, RMA or take it back to the place you bought it from.
depeche101 said:
.
Perhaps it's because the watch is already on Lollipop and the phone not yet...
dep
Click to expand...
Click to collapse
I'm on lollipop on both watch and phone and getting constant disconnections
I will say that my rom is a leaked version of lollipop from Samsung on my note 3
But to date since Xmas it's been a joke
To the point that it might be going back if it doesn't get fixed in the next few days
I am going to go back to official kit kat later and see if that helps
I must say before the lollipop update on both watch and phone it worked brilliant not one disconnection when I trialled the watch when it was first delivered.
If it had been like it is now I would have sent it back there and then
I'm just hanging on because I know it did work prior to the updates
So I'm sure it will again
Hello everyone. I'm really interested in getting this watch for the custom faces. I have no interest in connecting to my email, using a facebook I don't have, paging my cat, etc. Yes, I want to spend $300 dollars on this for custom faces. I know my options, I know the alternatives. You may call me crazy. Heck my psychiatrist does. Did he tell you to say that? Ok I don't have a psychiatrist. Maybe you don't believe me. Not my problem. What I do have is an Sony Ericsson Xperia Play phone running 2.3.4 gingerbread. Wont upgrade until something with a built in Playstation-like controller is released i.g. never, or rather when I'm millions of dollars richer. Don't steal my idea. If you don't already know, I'm living in the dark ages and I'm loving it. Like McDonald's milkshakes. Which I gotta start cutting back on. Why am I telling you all of this? Good question. But not the question I'm here to ask.
Can I connect my watch to a friend's modern droid phone, download a bunch of custom faces, desync it, go offline and never look back? Or are my accounts and dirty internet histories gonna stay with his phone? I don't mind my professional email being invaded, but I don't like people copying me or my internet histories. It just cramps my style. On a more serious note, I don't mind people copying me. It's flattering. My cat's name is Porko if you were wondering.
Yeah, you can upload whatever Watch face you like and just turn off the Bluetooth and you're offline..
That psychiatrist you mention might just be a good thing you know
And, this ain't Reddit, so cat names aren't important
I don't own this device but.. Does the watch sync time from phone? So after reboot or so you need to pair again to get correct time to watch?
No, it had an OS capable of tellinh and handling time but no internet conection
You can use without phone, but you must never power down an LG watch without phone. When you power off it lost hour until it connect to a phone to sync hour. When LG boot it is 1H00 on january 1, 1970 You can restart but never down. You can not power off for night.
dersie said:
You can use without phone, but you must never power down an LG watch without phone. When you power off it lost hour until it connect to a phone to sync hour. When LG boot it is 1H00 on january 1, 1970 You can restart but never down. You can not power off for night.
Click to expand...
Click to collapse
Meaning to say you can't even reboot?
x3dnd3x said:
Meaning to say you can't even reboot?
Click to expand...
Click to collapse
You can reboot without power off. If you power OFF and ON you must have a phone to connect the watch until hour sync. After you can disconnect.
I've had my watch lose connection and as such, the correct time in the middle of my work day. The problem fixes itself right away, but this could be a problem for you trying to use the watch independently.
On two occasions in the last three weeks my GWR has lost track of the date and time. Both times it was after my phone was away for an extended period of time. After a few minutes the watch will connect to the phone and will get all notifications but the date has changed to 1/1/70. I tried unconnecting and then reconnecting, "forgetting" and repairing and even resetting. The only thing that seems to bring the date and time back in line is letting it remain connected to the phone for an extended period of time (like 24 hours or so). At some point it just finally locks in to the date/time on the phone and displays correctly. What's also interesting is that the watch faces in Watchmaker, Facer, etc all do have the correct time. I would think that being the case that pushing to the watch would correct the problem but no such luck.
Also, isn't the watch supposed to be able to be used standalone for limited functionality (i.e. time, heart rate, steps)?
I've found two somewhat similar threads but none that are exactly this same issue. I have to believe that someone else has experienced this issue. If so what have you done to resolve the issue other than waiting for the watch to sync in with the phone?
After the update a few issues have risen. I've attempted to search for solutions for each one, with no avail.
These are issues that never happened before the update, and started right on the next day.
1. Audio apps close when locking the screen.
When I have a podcast running (on beyondpod) and I lock the screen from the off button, the app will either keep running, or close.
I have found a few questions like this on here and other forums, but none with a definative answer.
I've done a few of the suggestion, like cleared the cache. But is there an actual solution to this?
2. Bluetooth turns off/loses connection to my pebble 2. I think these might be connected.
While using a bluetooth headset, there are no issues. However I constantly (should) have my pebble connected to my phone. However, very quickly it loses the connection. It randomly finds the connection again randomly, but it wont stay connected for very long. Sometimes I catch my phone with the bluetooth turned off, however turning it back on wont neccessarily connect it to the pebble. I also tested out with IFTT, and everytime the phone cut the bluetooth connection it woul send me a notification. And it happened multipe times within the hour. Sometimes taking tens of minutes to reconnect, sometimes not reconnecting it at all.
3. Google Timeline (the thing that draws a map of where you've been and how you've traveled)
I used this to follow my cycling and walking, since step counters dont recongnize cycling very well or at all. However since the update the pages are all empty. It just wont recognize my movement at all. I later noticed that the location gathering accesses had been reset, but even after giving them access again there is absolutely nothing saved onto my timelines.
Please, if you have any ideas what is doing this, or any ideas how to fix one, or each of these, leave a reply...
If nothing else I'll have to rollback to Marshmallow... And I've really grown to like the split screen!
hi, having same problem as #3 on my brand new Huawei Mate 10 pro. did you ever solve the issue? thanks