This is a flashable zip made for cm12 based Roms.
It boosts speaker volume and headset volume and also plays ringtone in stereo.
How to install:
Flash thru your preferred recovery.
Profit.
V1 https://mega.co.nz/#!Ip1yEawI!N6I332ow5QkSj94rL5Yx6G9H3u8vl8RfUqVIXdjtKWk
V2 (Made from cm12 150105 build) https://mega.co.nz/#!kodjDR5T!MZUef-OacniXwBUa_Un_dzfh-lLFXIyFBNonVTmcuyM
This works perfect for me but I will not be held responsible for your actions. Don't underestimate the ability to hear.
Enjoy! [emoji41]
Thanks! Is it necessary to flash it after each new build?
action294 said:
Thanks! Is it necessary to flash it after each new build?
Click to expand...
Click to collapse
Yes, as the /system folder gets flashed over by the new build you update to.
You rock! Been waiting for this.
Sent from my Xperia Z2 using XDA Free mobile app
You don't need to flash this
you can extract with a file manager that you like ( i use ES File Explorer) and copy to the right folder,set the right permissions reboot and done!
FrosteezBR said:
You don't need to flash this
you can extract with a file manager that you like ( i use ES File Explorer) and copy to the right folder,set the right permissions reboot and done!
Click to expand...
Click to collapse
Yeah one could do that.
One could also just open and edit their own mixer_paths.xml and change values to ones own liking and save.
But the number one question that would pop up would be: can you make a flashable zip?
Yes I can. There you go
As with any problem there is several solutions
I choose to give the easiest one.
Can I flash this on CM11 4.4.4
No. There is another mod here that's made from the cm11 file needed. Take that one.
Does it work well on latest build?
0103
It should ?
I think it needs an update. Somethings changed in CM12 build from 28th or 29th dec. After flashing this fix speaker stops working, at least for me.
Karl-Johan said:
I think it needs an update. Somethings changed in CM12 build from 28th or 29th dec. After flashing this fix speaker stops working, at least for me.
Click to expand...
Click to collapse
I'll make an update. Will try when I have time.
First post updated with v2 link. Made from cm12 150105 build.
Working fine now, thanks for the update.
Reb0rn said:
First post updated with v2 link. Made from cm12 150105 build.
Click to expand...
Click to collapse
Thanks, it works great for me :thumbup:
Sent from my Xperia Z2 using XDA Free mobile app
can some one provide me other link. i am not able to download this
deepu28792 said:
can some one provide me other link. i am not able to download this
Click to expand...
Click to collapse
https://www.dropbox.com/s/wrgnn2iuydd5h5n/CM12StereoRingtoneBoost_v2.zip?dl=0
try with that
This wont work in a couple of nightlys as mixer_paths will be updated. Will do an update when that happens.
Is this working on the latest nightly? Thinking of flashing it.
Related
Hi, all.
This is my experiment to share with you.
This built based on CM10.1 android 4.2.2 with TabletUI added.
To flash this rom please follow cm10.1 nightly step, but not recommen to use mobile odin.
You can take it here via torrent , please share..
And flash modem from here too.
Khomsn
Change log
Reserved.. Change log.
Change logs for 4.2.2 built 1
Enable Phone call with speaker phone on by default.
kernel 3.1.10
CPU Clock rate from 150M to 1.4G, GPU 400M
USB MTP AND PTP useable.
Preload partition mount rw
Working wifi , wifi p2p, bluetooth but not for calling on voice call and skype calling.
pre-install samsungapp
ETC..
Bugs.
I don't know yet.
please report.
OK guy this is the file you need to replace in phone app folder to make a usable phone call, apply only for P7500. <- this one is for those, who wish to comply from source code.
For one, that don't want to comply yourselves just copy phone.apk to /system/app folder.
khomsn said:
Hi, all.
This is my experiment to share with you.
Function same as my cm10.
To flash this rom please follow cm10.1 nightly step, but not recommen to use mobile odin.
You can take it here. http://db.tt/c4mPJnRf
And flash modem from here, http://db.tt/5gqH90Xq
Khomsn
Click to expand...
Click to collapse
Link down man.....
hi anyone has a link to the rom?
Mate why don't you release a separate mod so that we can keep up with the nightly's
Sent from my GT-P7500 using xda app-developers app
Link Down Forever???
Looks like link is down forever???
208504683 said:
Mate why don't you release a separate mod so that we can keep up with the nightly's
Sent from my GT-P7500 using xda app-developers app
Click to expand...
Click to collapse
+1
khomsn said:
Due to my dropbox got a traffic jam so, it's suspended for 3 days, so all of you who want to test my rom please use torrent. and share for other too.
Click to expand...
Click to collapse
I'll seed it after download completes. Can you please post small update zip (or info - what is need to be modified) for people who want working calls on other roms? (and devices - I have Galaxy Tab 8.9)
khomsn said:
Hi, all.
This is my experiment to share with you.
Function same as my cm10.
Click to expand...
Click to collapse
Can you please share with us what is the diff btw this release and the official CM10.1 nightly? The official nightly voice test results are here: herehttp://forum.xda-developers.com/showpost.php?p=36264390&postcount=248.
Thanks
Would you please share your source code?
Thanks
C-o-M said:
Would you please share your source code?
Thanks
Click to expand...
Click to collapse
This week end I will share the patch that make phone call.
Download link
If someone needs this good rom + modem + gapps JB in one file only, I can send my dropbox link.
khomsn said:
This week end I will share the patch that make phone call.
Click to expand...
Click to collapse
I've decompiled your Phone.apk. (In case anyone is interested: he sets a wakelock in PhoneGlobals.setBeginningCall and releases it in updatePhoneState to prevent the system from sleeping during a call)
This is a suitable workaround, but it doesn't solve the root cause. And unfortunately, this is why I cannot integrate it in my CM builds.
C-o-M said:
I've decompiled your Phone.apk. (In case anyone is interested: he sets a wakelock in PhoneGlobals.setBeginningCall and releases it in updatePhoneState to prevent the system from sleeping during a call)
This is a suitable workaround, but it doesn't solve the root cause. And unfortunately, this is why I cannot integrate it in my CM builds.
Click to expand...
Click to collapse
Yes, This is for p7500 only work around, not recommended to intergrate to the main CM.
khomsn said:
Yes, This is for p7500 only work around, not recommended to intergrate to the main CM.
Click to expand...
Click to collapse
How to do it ourselves? can u provide a flashable patch?
Cm10.1 rom 4.2.1
sogol said:
If someone needs this good rom + modem + gapps JB in one file only, I can send my dropbox link.
Click to expand...
Click to collapse
Can you please send an updated links (cause dropbox and turrent are down), or
If possible, upload instead of the full ROM file only the CMW zip file which can be added to CM10.1 rom.
khomsn said:
Reserved.. Change log.
OK guy this is the file you need to replace in phone app folder to make a usable phone call, apply only for P7500.
Click to expand...
Click to collapse
Where is the folder located?
Couldn't flash it on cwm.
me_guitarist said:
Where is the folder located?
Couldn't flash it on cwm.
Click to expand...
Click to collapse
Dude can u be more specific? where to put the file? do we have to just extract it or we have to decompile the phone.apk or what to do? please elaborate.
Ya, I'm blur too. After extracted its a .java file.
Don't know what to do.
AW: CM10.1 P7500 with phone call, no bluetooth.
jittusm said:
Dude can u be more specific? where to put the file? do we have to just extract it or we have to decompile the phone.apk or what to do? please elaborate.
Click to expand...
Click to collapse
Just copy phone.apk to /system/app.
(If you wish to run this on 4.3 replace the DSP manager with the new version from CM 10.2 and it should work properly, discontinued from now onwards)
These files added to any aosp/aokp/pac/carbon rom will make your sound come out with more treble and bass, without distorting as many roms do I've been using them with aosp roms that annoy me with their sound quality, as well as fixing sound it adds DSP manager and Apollo to your rom, seeing as this is my first mod upload i haven't made a flashable zip, but if anyone's willing to make one and pass it here ill upload it. in the .rar file youll find folders to overwrite in your system folder, you can do it with root browser (free on the market) or by dragging them into a rom.zip file before flashing. enjoy & don't flash these on any other device as it may end up making the device unusable (C6603 has been tested so far and the C6602 MAY work, backup before using this)
UPDATE: now working with apollo
So, anyway, here's the Download link enjoy and happy flashing
NOT TESTED; FLASHABLE ZIP Courtesy of Miustone go give him a thanks
WARNING: This will NOT work on stock sony roms only AOSP/CM/PAC ETC.
WARNING2: AGAIN this is NOT a FLASHABLE zip you must copy the contents manually or insert them into an existing rom.zip before flashing a rom.
WARNING3: I cannot stress enough how important it is to backup before using this. ALWAYS BACKUP before modding ANYTHING.
Which setups this mod has been tested on (Yes/No)
C6603 : Y :good: (Working)
C6602 : N (Unknown if working or not)
AOSP : Y :good: (Working)
AOKP : Y :good: (Working)
PAC : Y :good: (Working)
Bluetooth : N (Should work but unknown)
4.3 : Y :good: (Working)
Apollo : Y :good: (Working only tested on 4.3)
Hi,
thanks for the mod.. i will try it when i have time :good:
i hope someone can make a flashabile zip.. better and fast way to apply the mod...
Thanks
tanoxxx said:
Hi,
thanks for the mod.. i will try it when i have time :good:
i hope someone can make a flashabile zip.. better and fast way to apply the mod...
Thanks
Click to expand...
Click to collapse
I'm attempting to and failing at it.
Should probably add for some reason the audio mods aren't working with apollo... they're working with play music though sorry guys
Making compatible with 4.3 leak...
Will you be making one for stock roms? 423 specificallY?
ethan3686 said:
Will you be making one for stock roms? 423 specificallY?
Click to expand...
Click to collapse
I might look into it in a few days.
Edit: It doesn't look like it. Besides, I'd recommend using PureXAudio on Stock.
So I have no sound after copying each file. Wtf.
noodlesfordaddy said:
So I have no sound after copying each file. Wtf.
Click to expand...
Click to collapse
You need to set the right permissions, I hope you backed up beforehand...
backup before using this)
Click to expand...
Click to collapse
Lemagex said:
Should probably add for some reason the audio mods aren't working with apollo... they're working with play music though sorry guys
Click to expand...
Click to collapse
Try the zip i maked for you... HERE so you say Apollo is'nt working but Play Music? i can make a flashable zip with Play Music if you want
BR
when the zip does not work tell me and i make a new one with other update script
Miustone said:
Try the zip i maked for you... HERE so you say Apollo is'nt working but Play Music? i can make a flashable zip with Play Music if you want
BR
when the zip does not work tell me and i make a new one with other update script
Click to expand...
Click to collapse
Thanks that's really appreciated, i've been too busy working on 4.3 for the galaxy S 3
i'm currently using EXTRA_VOLUME_BOOST_AOSP.zip by ZeroInfinity on AOKP... will this increase the ringing volume as well??
thanks
Hello. Thanks for this. Only thing I'm not liking about PAC ROM is the quiet speaker. Seems after installing the zip there is no difference. How can I tell if bits working?
Edit: in root explorer I have a the files in hw lib and sound fix are date modified 1/8/2008. Everything else is 27/7/2013. I have to assume it worked. Although using external speaker seems no different will need to test headphones.
Hey
After flashing the zip file the sound is much better than before!
Thx for that.
But! If I change settings in the DSP Manager the sound doesn't change either in Apollo or Play Music.
I'm an AOKP (Android 4.2.2) nightly from 2013-08-21.
Maybe someone have a solution
It is because they have tunnelaudio playback activated. This is DSP based decoding with audio straight to dacs. There is no way you can have an eq in software.
Too busy to keep maintaining this, have it running on 4.3.1 but it's not much different than what people offer as standard for the XZ anymore so it's pointless. Would appreciate a thread close.
Hi guys,
Personally I like the Stock LP 5.0.x Google Sounds used on the Nexus devices, so I made a flashable zip for any LP 5.0.x custom ROM.
Just flash on your favorite recovery and profit (it will remove all system/audio folder so please make a backup).
Tested on Official CM12 nightlies but will work on any LP 5.0.x custom ROM.
Code:
Extracted from the Google 5.0.1 (LRX22C) Factory Image for the Nexus 6
MEGA | Mediafire
@gianton will it work on cm11 44s?
rafiuddinrozman said:
@gianton will it work on cm11 44s?
Click to expand...
Click to collapse
Yes most likely it'll work, make a backup first of your audio folder.
gianton said:
Yes most likely it'll work, male a backup first of your audio folder.
Click to expand...
Click to collapse
Will backup my audio first and try. Thanks @gianton :good:
---------- Post added at 05:27 PM ---------- Previous post was at 05:20 PM ----------
gianton said:
Yes most likely it'll work, male a backup first of your audio folder.
Click to expand...
Click to collapse
Report.
Messages : Error executing updater binary in zip.
What does it mean?
rafiuddinrozman said:
Will backup my audio first and try. Thanks @gianton :good:
---------- Post added at 05:27 PM ---------- Previous post was at 05:20 PM ----------
Report.
Messages : Error executing updater binary in zip.
What does it mean?
Click to expand...
Click to collapse
Which recovery are you using? Working fine with twrp 2.8.3.0 for me.
gianton said:
Which recovery are you using? Working fine with twrp 2.8.3.0 for me.
Click to expand...
Click to collapse
same recovery with you. i'll try download again. maybe bad download.
Sad to report that I am having the same issues as well. On the latest version of TWRP
edit: My workaround was just to extract the .zip and manually delete and replace the ones in my system/media folder. Thanks for the sounds! I couldn't find them anywhere without having to extract from a Lollipop ROM
OP updated with a new link, maybe it was a bad upload. Tested this morning again with Euphoria 01/12 build and worked fine.
gianton said:
OP updated with a new link, maybe it was a bad upload. Tested this morning again with Euphoria 01/12 build and worked fine.
Click to expand...
Click to collapse
Update : Its work @gianton ... :good:
Thanks
CM12 has different sounds than stock AOSP? 0_o
CraZY_BoY^ said:
CM12 has different sounds? 0_o
Click to expand...
Click to collapse
Yes, still use the ones from CM11.
gianton said:
Hi guys,
Personally I like the Stock LP 5.0.x Google Sounds used on the Nexus devices, so I made a flashable zip for any LP 5.0.x custom ROM.
Just flash on your favorite recovery and profit (it will remove all system/audio folder so please make a backup).
Tested on Official CM12 nightlies but will work on any LP 5.0.x custom ROM.
Code:
Extracted from the Google 5.0.1 (LRX22C) Factory Image for the Nexus 6
MEGA | Mediafire
Click to expand...
Click to collapse
Just a quick question, does this just add the LP sounds to the folder or replace the whole thing? I don't think this worked for me, as I can still see all the CM ringtones and sounds when I try to change my ringtone. Maybe I messed something up. Thanks.
cgjjaf said:
Just a quick question, does this just add the LP sounds to the folder or replace the whole thing? I don't think this worked for me, as I can still see all the CM ringtones and sounds when I try to change my ringtone. Maybe I messed something up. Thanks.
Click to expand...
Click to collapse
It removes the whole audio folder and then flashes the LP one.
Have you checked that you haven't got any sound files in your storage?
gianton said:
Yes, still use the ones from CM11.
Click to expand...
Click to collapse
Yep, now noticed difference. Nexus sounds are also included in BlissPop
Much better than CM11, especially sound when touching screen
Thanks a lot ... i love stock nexus sounds ... :highfive:
ak said:
Thanks a lot ... i love stock nexus sounds ... :highfive:
Click to expand...
Click to collapse
You're welcome mate.
Will this work on stock cm11s ROM? ?
fullmetal509 said:
Will this work on stock cm11s ROM? ?
Click to expand...
Click to collapse
mine work. anyway backup first. then flash. tq
I flashed this over [ROM][5.0.2][LOLLIPOP][BACON]RESURRECTION REMIX_lp 5.2.9[BETA] but I don't think some of the sounds got converted.
I remember on my N5 the click sounds (opening app drawer) were more of a thud, and what I'm hearing is more like a sharp (annoying) chink, I don't know how to describe a sharp sound better sorry .
I'll try to capture some video + audio and post here.
These plus your GAPPs and I've got myself a OnePlus Nexus
Project terminated
Sounds awesome! Can't wait to try it out.
Links are good to go. Have fun.
JakeyEck said:
Sounds awesome! Can't wait to try it out.
Click to expand...
Click to collapse
Sorry about the wait. Had a few last minute bugs pop up I had to remove. But all is well now. Enjoy.
ZX64 said:
Sorry about the wait. Had a few last minute bugs pop up I had to remove. But all is well now. Enjoy.
Click to expand...
Click to collapse
I haven't tried it yet, but is it possible to install these on any other cm based roms?
JakeyEck said:
I haven't tried it yet, but is it possible to install these on any other cm based roms?
Click to expand...
Click to collapse
That is not something I know. I only have tried it on CyanogenMod Official builds.
I can only assume it might, I just don't personally run anything but the Official builds or my own Unofficial builds (that are not posted or really any different than CMs right now).
so if i flash snapshot on CM13 , it will give me theme chooser
Ajaykumar21066 said:
so if i flash snapshot on CM13 , it will give me theme chooser
Click to expand...
Click to collapse
If you flash the snapshot on a CM13 NIGHTLY it will have issues. This is the whole reason for 2 versions.
One for SNAPSHOT CM13 builds and one for NIGHTLY builds.
deleted
@ZX64 Would you be willing to make a zip for the snapshot builds that has just the cool blurred lockscreen, Maxx, Gallery Next, and Theme chooser? And it'll work with Sultan's CAF builds, correct?
Sent from my A0001 using Tapatalk
threetwentyfizzle said:
@ZX64 Would you be willing to make a zip for the snapshot builds that has just the cool blurred lockscreen, Maxx, Gallery Next, and Theme chooser? And it'll work with Sultan's CAF builds, correct?
Click to expand...
Click to collapse
Okay so..
A: I do not know what to pull to get the COS lockscreen with blur. That is why it is not listed as an included feature.
B: I will not flash Sultans build even for testing bugs. I ONLY support Cyanogen/CyanogenMod official ROMs or my own personal builds I don't upload or release anymore.
So any other ROMs.. They're hit or miss and I will not change my packages for them.
If you feel a need to change them.. You can easily do so with basic understanding of English and RAR (Play Store).
Sorry but I've learned the hard way about compensating for Custom ROMs. It gets too crazy too fast.
These are as universal as it'll get.
Which version should I use for Sultan's ROM?
I want just cortana and themes
Need I any others libs put somewhere into system? Because cortana and even themes don't work.
Is cortana worth anyway?
I know you don't support custom roms but let's say I have official cm build and want only cortana what should I do?
ZX64 said:
Links are good to go. Have fun.
Click to expand...
Click to collapse
do we need to wipe anything in twrp before flashing this mod ??
while everything worked on the latest nightly for bacon ,only the COS dialer has crashed repeatedly !!
dasti555 said:
Which version should I use for Sultan's ROM?
I want just cortana and themes
Need I any others libs put somewhere into system? Because cortana and even themes don't work.
Is cortana worth anyway?
I know you don't support custom roms but let's say I have official cm build and want only cortana what should I do?
Click to expand...
Click to collapse
I don't support non official ROMs. Quit asking
drive2droad said:
while everything worked on the latest nightly for bacon ,only the COS dialer has crashed repeatedly !!
Click to expand...
Click to collapse
You need to read.. Once you set permissions for Cyanogen Account it works fine
phanipk said:
do we need to wipe anything in twrp before flashing this mod ??
Click to expand...
Click to collapse
Omg.. Seriously.. All instructions are in the OP. This isn't rocket science
ZX64 said:
You need to read.. Once you set permissions for Cyanogen Account it works fine
Click to expand...
Click to collapse
Thanks for the suggestion it works now !! Can you make a new zip without Max Audio in it, i tried deleting a few files but seems the libs got installed anyways.
drive2droad said:
Thanks for the suggestion it works now !! Can you make a new zip without Max Audio in it, i tried deleting a few files but seems the libs got installed anyways.
Click to expand...
Click to collapse
Another way to find the files you need to remove is to look in the addon.d folder. The script lists every file installed, and backed up for ota update compatibility.
If I remember right.. All the maxxaudio files are in a group so you'd only have a list of what to remove
ZX64 said:
Another way to find the files you need to remove is to look in the addon.d folder. The script lists every file installed, and backed up for ota update compatibility.
If I remember right.. All the maxxaudio files are in a group so you'd only have a list of what to remove
Click to expand...
Click to collapse
Got it
Here is the change-log for the latest Open Beta build, we have bug fixes and a few changes for you to play with.
System:
Added "Soft" screen calibration
We’ve reverted the screen calibration and added the new calibration from last build as “soft.” You can enable the new calibration in the "display> screen" calibration section of settings
New boot animation
Optimized the clearing of recent apps
Other:
Updated Community app to V1.9.5
Minor bug fixes
Please note: We have patched the blueborne vulnerability independent of the Android security patch. Therefore, some blueborne vulnerability scanners may not recognize our independent patch.
Please make sure you take a bit of time to fill out our survey on UX & UI here:
https://goo.gl/forms/ET3E7TbllSksASKT2 .
And please remember to tell us about any bugs you may find using the bug report forums, found here. https://forums.oneplus.net/feedback/
Remember:
If you have already flashed an Open Beta (you are currently running the latest Open Beta) you will receive this new build as an OTA.
If you ARE NOT running open beta software and would like to, please refer to the flashing instructions and the full ROM found in the downloads page here: http://downloads.oneplus.net/
Once you migrate to the Beta path, you will continue to receive Open Beta OTAs. You will NO LONGER receive the regular Official Stable OTAs.
Moving back to the Official OTA path from the Beta path will require a full install and clean flash (FULL WIPE of all data and cache)
Edit: OTA mostly will not install. You have to install the full ROM of 1.5gb which works fine with most of the beta users.
I love the new bootanimation <3
the last 2 beta is very laggy, is this fixed?
OB24 Google Drive Link
https://drive.google.com/open?id=0B9UXi1UID7ZBWm9qUHRGSEtKdW8
johnypl said:
the last 2 beta is very laggy, is this fixed?
Click to expand...
Click to collapse
Couldn't notice any lag...
Please could anyone test and tell if the sound problem has been fixed? Who kept stopping and came back. :laugh:
XDRdaniel said:
I love the new bootanimation <3
Click to expand...
Click to collapse
Can you provide the bootanimation here after the update?
I am rooted with Magisk and not able to flash Stock boot to update the ROM right now.
arnabJ said:
Can you provide the bootanimation here after the update?
I am rooted with Magisk and not able to flash Stock boot to update the ROM right now.
Click to expand...
Click to collapse
We also have boot sound now, but I don't know where to extract it from...
arnabJ said:
Can you provide the bootanimation here after the update?
I am rooted with Magisk and not able to flash Stock boot to update the ROM right now.
Click to expand...
Click to collapse
Are you sure you want this abomination?!
Not only is it ugly, it also seems to increase boot time.
XDRdaniel said:
We also have boot sound now, but I don't know where to extract it from...
Click to expand...
Click to collapse
It must be in /system/media directory.
But never mind. I don't need it now. (Read below).
AcmE85 said:
Are you sure you want this abomination?!
Not only is it ugly, it also seems to increase boot time.
Click to expand...
Click to collapse
Aaaah no I am fine with the current one.
Hahahaaha.
arnabJ said:
It must be in /system/media directory.
But never mind. I don't need it now. (Read below).
Aaaah no I am fine with the current one.
Hahahaaha.
Click to expand...
Click to collapse
Could you please do me a favor and upload your (stock) bootanimation.zip.
Thank you!
edit: The audio is actually stored within the new bootanimation.zip as a wav file.
AcmE85 said:
Could you please do me a favor and upload your (stock) bootanimation.zip.
Thank you!
Click to expand...
Click to collapse
There you go.
DOWNLOAD FROM GOOGLE DRIVE
Sent from my OnePlus3 using XDA Labs
change logs , benchmark test
after download on 85mb ota download, and can't install (install failed) from stock recovery and i try to reboot the new update come with 1.5GB anyone face this problem too? thanks
francise said:
after download on 85mb ota download, and can't install (install failed) from stock recovery and i try to reboot the new update come with 1.5GB anyone face this problem too? thanks
Click to expand...
Click to collapse
This is normal read first post on OnePlus forum post
Can someone extract boot.img for me?
Thank you.
Sent from my ONEPLUS A3003 using Tapatalk
meetpatel said:
Can someone extract boot.img for me?
Thank you.
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
Oneplus 3 or oneplus 3t?
francise said:
after download on 85mb ota download, and can't install (install failed) from stock recovery and i try to reboot the new update come with 1.5GB anyone face this problem too? thanks
Click to expand...
Click to collapse
Yes this happened with me too. I had to install full zip which worked for me.
izukamikain said:
Oneplus 3 or oneplus 3t?
Click to expand...
Click to collapse
Ohh. I want for oneplus 3, but I got it. Thank you.
Sent from my ONEPLUS A3003 using Tapatalk
Old bootanimation and bootlogo
Flash via TWRP
Download