Ok, I have the M8 (obviously) with a defender case. Looking for a nice, easy to use, sturdy mount that would also accommodate my case. I plan on hooking up my MHL cord to it as well. BUT. It needs to be seriously sturdy. I have 2 12" MTX subs being pushed with a jackhammer amp. The last mount I put in my truck (for a GPS) was ANNIHILATED by the base. By that I mean it lasted 2 days of me driving 5 mins down the street twice a day.. any ideas?
Sent from my 831C using XDA Free mobile app
I've had the same car for the last 10 yrs and i use a proclip bracket in it. On it i've mounted many of these mounts from slipgrip for my phones. Used ones for generic tpu-sized cases to seidio active and ballistic/trident cases and they've always held tight. I personally use what they now call the Pro mount since i already have a base, but their ready to go solutions with base and mount might work for you.
I've taken the liberty of navigating all the way to the defender case selection for the m8.
Slipgrip mounts for M8 with defender case
I second Pro Clips. Expensive but they work. I also been running ProClips for over 10 years and it has never failed.
I had been buying the custom half for the phone but finally bought their universal which has a narrow range of adjustment that works good.
I recommend the Kenu Airframe plus. Its super small but it does the job. It is a vent mount clip. I have the original version but I recommend the new plus version since it can fit up to 6 inch phones now, no worry for your otterboxed M8.
http://www.amazon.com/Kenu-Airframe-Car-Mount-Phablets/dp/B00LU5LWQK
bk73w said:
I have 2 12" MTX subs being pushed with a jackhammer amp. The last mount I put in my truck (for a GPS) was ANNIHILATED by the base. By that I mean it lasted 2 days of me driving 5 mins down the street twice a day
Click to expand...
Click to collapse
You mean the bass from your setup actually broke the mount?
There probably isn't any perfect mount for all folks and all situations. But I've been very happy with the Mountek CD Slot mount: http://www.amazon.com/Mountek-nGroove-Universal-Phones-Devices/dp/B004G1L52Q/ref=sr_1_1?ie=UTF8&qid=1418915871&sr=8-1&keywords=cd+phone+mount
Its a simple concept and inexpensive; and while not particularly fancy looking, is well though-out and sturdy. It holds a wide variety of phones (including our M8) very securely, yet its easy to place and remove the phone quickly. I've had a lot of folks ask me about this mount, when they ride in my car. And my wife liked it so much, she's got one, too.
Its a great solution if you don't use CDs. You will also want to check if the mount is going to block anything that is important to you. And a CD slot near the top of your dash (for easy phone viewing and operation) is best. But I often take mine on trips, and it works on many more rental cars than not.
Just remember that hearing damage is permanent. I know it's wicked cool to drive down the street annoying everyone you're near with your bass, but when you're in your 30's you'll be wishing your ears didn't ring all the time. Trust me.
/old man soapbox
Related
Can anyone recommend a suction cup mount that I can use in the car? It doesn't have to be made specifically for the MyTouch, I just want to be able to see the navigation while i drive instead of constantly looking down at my cup holder.
I'm in the market for one too. I would like to buy it as a christmas gift for my Boss.
doalittledanse said:
Can anyone recommend a suction cup mount that I can use in the car? It doesn't have to be made specifically for the MyTouch, I just want to be able to see the navigation while i drive instead of constantly looking down at my cup holder.
Click to expand...
Click to collapse
i third this!
I am using this one here:
http://www.amazon.com/Holder-T-Mobi..._1_3?ie=UTF8&s=wireless&qid=1259151227&sr=8-3
It gets the job done. The suction works just fine, have had no instances of it coming off, and my phone has never come out of the mount. The only thing is, be careful with the ratcheting mechanism... when I first got mine I forced it a bit hard without pressing in the release button, and now it doesn't always stay centered and skips teeth sometimes but still works.
It has an open space in the center of the bottom so you can still connect power/audio. It holds the phone well, has rubbery foam on the side arms to grip the phone. For $10 its worth it, IMHO.
Head over to your local large electronics retailer (Best Buy, Future Shop, Radio Shacketc) and look in the GPS and IPhone sections. I bet you could also order it through Amazon.
I have seen the same mount under multiple brand names there. It is around $30 in Canada, so figure $20sh in the US. The one I have is called the "Grip-iT" by Scosche. Allows the phone to be held vertically and horizontally, has a longer flexible neck to position it and a really strong suction cup mount. Also comes with an adhesive mount disk if you have to mount it that way (some places don't allow windshield mounts).
I use it mostly in a fullsized pickup with a stiff suspension and have had no problems with it coming loose.
The one I have is this one:
http://www.scosche.com/products/sfID1/337/sfID2/344/productID/1593
I would stay away from this one as it is a PITA (at least in my GMC truck, which has fairly standard air vents) to mount:
http://www.scosche.com/products/sfID1/210/sfID2/337/productID/1594
What ever you do don't buy the cheap Bell brand mp3/pda window mount kit. They are usually found in the discount stores like Wal-Mart, K-mart, etc. The clamp swivel is loose, it can't keep the phone up at a pleasant viewing angle. If you hit a good bump the phone shoots out from the poor grip and the clamp closing by the pressure of the spring. Ugh, pure garbage and a great way to get in a car accident.
Off both of what you guys found and use, are they universal?? Meaning as in, can I swap my sapphire with my g1 or other devices. I guess I should just be asking if the width is very adjustable and or can you change the angle from portrait to landscape easily?? Thanks guys. Just doing my research before I ask for one for x-mas
I have been using this one for a few weeks now.. It's actually very sturdy and becuase its made specifically for our phones, it looks sooo much better and very smooth compared to the other universal ones.
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=170391719566&ssPageName=STRK:MEWNX:IT
When you order, keep in mind it's coming from china..it took around 3 weeks to receive but well worth the wait.
It's sticks to the windshield like a champ and will not budge unless you use the release tab. Highley recommended for nav pruposes.
stillriza said:
I have been using this one for a few weeks now.. It's actually very sturdy and becuase its made specifically for our phones, it looks sooo much better and very smooth compared to the other universal ones.
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=170391719566&ssPageName=STRK:MEWNX:IT
When you order, keep in mind it's coming from china..it took around 3 weeks to receive but well worth the wait.
It's sticks to the windshield like a champ and will not budge unless you use the release tab. Highley recommended for nav pruposes.
Click to expand...
Click to collapse
Thanks. That one looks pretty good. Just ordered it.
Awesome find... I just ordered one too. Thanks!
It's amazing! Best custom mount I've owned. And the clip that holds the phone is also a removable belt clip. There's a punch out for the camera, been driving around with layar turned on. It is win.
Sent from my ADR6300 using XDA App
link?
10 chars etc
I haven't seen it online yet, only in a store so far. Ill post pix later.
Sent from my ADR6300 using XDA App
Is it any different than this one?
http://amzn.com/B003LEGZGK
AFAIK, this is the only custom mount of ANY KIND for the Incredible produced by HTC, which drives me crazy.
tdiman said:
Is it any different than this one?
http://amzn.com/B003LEGZGK
AFAIK, this is the only custom mount of ANY KIND for the Incredible produced by HTC, which drives me crazy.
Click to expand...
Click to collapse
There are two versions available from the Verizon store. The one you linked to and one other. They both have one big issue. If you already have a protector for your phone that you like, it will not work unless you take your protector off. The one you linked to has one other issue, it uses double sided tape to mount. The other one I looked at had a suction mount, but as I said, it will not let you put your phone on it unless you remove any protector you are using.
the one linked is the one i'm talking about. i haven't found it on the VZW website anywhere, didn't think to look anywhere else. i don't use a case or anything full time, i ordered an otterbox for when i'm working to wear on my belt, but when i'm not i just throw the phone in my pocket and run. i wish seidio came out with a car mount like this that worked with one of their cases, that would be epic. i'm sure with a dremel tool you could make it work if you were so inclined.
I have this one
I bought this with my incredible when I first got it. before 30 days was up the clip broke. I took it back and got it replaced. Then a couple of weeks later the new one broke in a different place. I hadn't even taken the new one off the car mount and worn it on my belt. I ended up cutting off the clip and gluing the clip to the mount so that it became a car mount only.
dltccf said:
I bought this with my incredible when I first got it. before 30 days was up the clip broke. I took it back and got it replaced. Then a couple of weeks later the new one broke in a different place. I hadn't even taken the new one off the car mount and worn it on my belt. I ended up cutting off the clip and gluing the clip to the mount so that it became a car mount only.
Click to expand...
Click to collapse
where did it break?
i'm wondering if there's a way i can use another company's clip and case without having to remove it. thinking of getting the seidio innocase and clip or something like that, maybe just cut the little tab off of the car mount clip and using that on whatever one i end up getting.
I don't want or use the belt clip, just adds another point of movement to the system. There's no happy medium with adjustments, you either get it where you want it and tighten it down to no flexibility, or it is way too loose. Due to the way the suction cup is engineered, the act of placing the phone or removing it from the clip torques the suction, causing it to fall off all the time. Was not at all impressed.
I have this mount I just pictured. I find it reliable. I do not use the belt clip.. I always leave that on the mount.
I have never used phone cases on any of my cell phones for 12 yrs.. I only have a screen protector..
Dinc goes in my phone pocket. My designated pocket only for my phone.. Not change or car keys..
Carefull
I have one of these.. or I should say I've had 2 of these. First one broke after about 8 seconds of being up and I tried to rotate the phone, and the hing that holds the clip on snapped.
Took it back to Verizon they swapped it out... had the second one a month or so and went to remove the phone and clip from the stand... and the plastic washer that holds the clip to the mount broke.... I now have it zip tied and it works great.
I was not rough with it, its just very fragile. Otherwise a good mount.
I've had 2 and the first one broke within a week. The clip that hooks into the mount broke and wouldn't mount. The second one I had for a few days before it broke. The one the hinge went. I didn't bother trying to replace it again. They did swap it out, but if two break that quickly, I figure I'll just keep having the same problems.....
Add me to the "it's too darn fragile" camp. I ended up buying a third-party "one size fits all" type... They lie too, but it works. I just have to adjust it so the volume key isn't being squashed. (also, no cut out for camera)
2 broken clips at hinge and counting.
Same here, my clip hinge broke both times. I just have it sitting there in the car driving down the road and the phone just falls off and the hinge is broken. I think the plastic is too thin, should be a metal part, and the spring tension always on it fatigues it. Bad design.
I went to verizon and told them I wanted their generic mount and they handed me this:
http://www.amazon.com/Bracketron-PH...r_1_41?s=STORE&ie=UTF8&qid=1285511830&sr=8-41
The one Verizon actually sells is slightly different as the little bottom nodes that hold the phone phone sits on can be bent in and thus you can move the phone around. I will have to take a picture of mine. Anyways even with a case it fits perfectly and its only like $20 and if you have the corporate discount which gets you 25% off it runs about $16.70 total after taxes which is what I bought it for.
angryspoon said:
I went to verizon and told them I wanted their generic mount and they handed me this:
http://www.amazon.com/Bracketron-PH...r_1_41?s=STORE&ie=UTF8&qid=1285511830&sr=8-41
The one Verizon actually sells is slightly different as the little bottom nodes that hold the phone phone sits on can be bent in and thus you can move the phone around. I will have to take a picture of mine. Anyways even with a case it fits perfectly and its only like $20 and if you have the corporate discount which gets you 25% off it runs about $16.70 total after taxes which is what I bought it for.
Click to expand...
Click to collapse
So which one would you recommend? I plan on doing a lot of driving up and down I-95 to visit friends in Maine/NH/PA/MD/VA and would love having Google's "Navigator" mounted on my windshield instead of having it sitting in a cup holder (like I do now). I'll be careful with any mount I get, but those universal mounts are just too bulky and a lot of them mess with the volume controls or doesn't leave me a space to plug the phone into my lighter outlet (or have weird mounting points, like in one of the air vents).
DeeBG said:
So which one would you recommend? I plan on doing a lot of driving up and down I-95 to visit friends in Maine/NH/PA/MD/VA and would love having Google's "Navigator" mounted on my windshield instead of having it sitting in a cup holder (like I do now). I'll be careful with any mount I get, but those universal mounts are just too bulky and a lot of them mess with the volume controls or doesn't leave me a space to plug the phone into my lighter outlet (or have weird mounting points, like in one of the air vents).
Click to expand...
Click to collapse
I really recommend the Verizon one made for the incredible. all buttons and ports are accessible on the incredible
Like I said, I leave the belt clip mounted at all times, and the only protection I use for my phone is my special pocket and a screen protector.
patches152 said:
It's amazing! Best custom mount I've owned. And the clip that holds the phone is also a removable belt clip. There's a punch out for the camera, been driving around with layar turned on. It is win.
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
I just bought it on a whim today and it is definitely great. Way better than the staples generic one that broke in the first 2 weeks
Wife and I both have one. Both broke right away. Replacements also broke. Always in the same place, the hinge for the clip snaps. The spring is simply way too powerful for the strength of the plastic. On the replacements I just slathered epoxy all over the hinge to make it a permanent mount. Neither one of us were using it for anything other than the car dock, but the thing just breaks like a cheap wine glass.
So in my experience they were 4/4 for breaking within 3 weeks. It's a great dock, but you just have to expect it to break unless you do what I did and glue the living crap out of it.
ive had my verizon mount for about 2 weeks now, my only complaint is that it has a removable belt clip. Ive tried different locations around my windshield and since I play with it so much, the clip has wiggled loose a time or two. other than that, its been better than any mounts ive tried to hack together for it.
TL;DR good mount, bit pricey
I was thinking of using the phone when cycling to track my route and so that I can see my position. I will not be going off-track often and I don't expect to be falling off the bike often . Could you recommend some good case? Thanks
I'm using this one for the past 2 years and it's really great:
http://www.topeak.com/products/bags/smartphone_drybag_5_wt
It hosted my Nexus 4, then my Z1C and now my Z3C . The great thing is that it has a clip on the back that you can attach to the regular clothes too, so I can use it also if I go hiking or rowing.
You will have to use a bluetooth adapter during those times because the phone will be enclosed 100%.
super cheap yet very solid and functional:
http://www.ebay.com/itm/Hot-Phone-H...896?pt=LH_DefaultDomain_0&hash=item3aa4bf55a8
I'm a bike commuter and like to have my phone on my handlebars every day either as speedometer, clock or music player. I've used a number of different mounts with varying degrees of success.
Right now, I'm a huge fan of QuadLock (quad lock case dot com) . For the Z3c, you'd need to get a secure 3rd party case case (not sure which would be the most secure, maybe the Ringke Fusion? or Terrapin? I dunno), then get the Bike Kit which includes the bike mount and the universal adapter. I've used this setup with three different phone/case combo's thus far and each has been rock solid.
I can't comment on the earlier poster's ebay mount, but I can offer some advantages of the Quadlock over the Topeak bag. A huge benefit of the Topeak is that it's a dry bag, protecting your phone from the elements. But, that's not a concern with the Z3c since it's water/dust proof. And, the downside of the Topeak is that it can overheat, they warn about this on the Topeak site, and I've experienced it with other enclosed mounts. Also, with the Quadlock, you will still have access to charging (depending on your case) either from a battery pack or a hub gen if you have one - I've done both.
The downside of the Quadlock is that it's $40 USD. But, being the most reliable one I've tried thus far, I don't have a problem with that cost.
HTH,
Jack
Hey Jack, I'd like to get your opinions after using Quadlock after a year. I'm looking for most robust option. Quadlock has dedicated products for iPhones and some other devices but they recommended universal adaptor for Z3C. But I don't trust the adhesive that will be mounted on Z3C case. Have you had any issues with this? I suppose you have used Universal adaptor as well.
I can also buy a more up-to-date and compatible product that supports charging while using the device. I have a Roswheel front bag on frame for Z3C. Basically I'm not happy with using it. But I can use it to house my charger and from there an extension of charging cable to Phone at handlebar could do the trick. What do you think? Of course this is a rare case scenario. I'm not a great fan of cycling. Only joining weekend activities. Usually they take only 70 miles.
I would also appreciate a little update. I also have something similar to the bag mount. Quadlock looks really cool, but I can't justify the price.
Sent from my D5803 using Tapatalk
If your headset stem is square-section, the easiest way to mount your phone is with a simple loop of elastic. Starting with the loop under the stem, pull up loops along the left and right sides of the stem. Then thread your phone through those loops so it's sitting on top of your stem. Our phones are waterproof, so no need for a case. They also have those tiny wrist-band strap holes at the bottom which you can use to make a secure back-up to stop the phone hitting the floor if the elastic fails.
I cycled across Europe like this last summer - absolutely perfect tool for the job.
This new mount from Spigen is the best car mount I've ever seen. Mount it right behind the steering wheel and you have a heads up display just below the windshield, at least on the Mazda 3. Perfect.
http://www.spigen.com/products/spigen-car-mount-stealth
It's good but could be better. The sticker on it sucks for the windshield in hot weather. I replaced it with 3m tape.
Car Rental
Would this work well for someone who is looking for a mount to use in rental cars? Not seeing how reusable the adhesive pad is anywhere or if it's going to leave marks that I'll get charged for.
rgs2 said:
This new mount from Spigen is the best car mount I've ever seen. Mount it right behind the steering wheel and you have a heads up display just below the windshield, at least on the Mazda 3. Perfect.
http://www.spigen.com/products/spigen-car-mount-stealth
Click to expand...
Click to collapse
Nice one.. Thanks for sharing
You could use the 3M tape in a rental car. I haven't had any problems with the tape that comes with it.
rgs2 said:
You could use the 3M tape in a rental car. I haven't had any problems with the tape that comes with it.
Click to expand...
Click to collapse
Which one?
Sent from my LG-H815 using Tapatalk
http://www.amazon.com/gp/product/B00EYNRJOE?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
I've been using this $10 mount for a bit over 2 years now, and it has never fallen off my dashboard. If anything, it's hard to pull it off the dash at times if I want to move it somewhere works great, cheap, zero complaints.
ryanpm40 said:
http://www.amazon.com/gp/product/B00EYNRJOE?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
I've been using this $10 mount for a bit over 2 years now, and it has never fallen off my dashboard. If anything, it's hard to pull it off the dash at times if I want to move it somewhere works great, cheap, zero complaints.
Click to expand...
Click to collapse
it says...
The power suction enables you to mount on to almost any surface such as dashboards, metal, glass, plastic and even drywall Silicon lined grid keeps your phone and other devices safe and secure.
A suction attachment seems much more durable than adhesive. temperature won't matter and it can be adjusted as it isn't permanent. An essential feature.
rgs2 said:
This new mount from Spigen is the best car mount I've ever seen. Mount it right behind the steering wheel and you have a heads up display just below the windshield, at least on the Mazda 3. Perfect.
http://www.spigen.com/products/spigen-car-mount-stealth
Click to expand...
Click to collapse
I like this, nice simple, compact design. Easy to install my phone onto it too.
hmmmm I might have to grab one of these, I like the compact design so you cant really tell its there when your phone is not in it
Pro-Clip rules. No Sticky tape. And I prefer portrait mount for Nav. I want to see more of what's ahead than what I'm passing.
Nice but doesn't have Qi support for me... I use my phone a lot in the truck so I have been looking for less hassle with cords for the power... got the bluetooth audio for the nav & music but it needs a power source to run all day.
Amazon sell it for #16.99
http://m.ebay.com/itm/Spigen-Stealth-Cellphone-Car-Holder-Universal-Car-mount-for-Cell-Phone-Devices-/201358824286?nav=SEARCH&varId=500554301058 heres the exact same spigen mount on ebay, 20$ , a much better deal then the 30 they charge on their site.
my favourite mount is the magnetic CD slot mount, like this one, they are amazing.
http://www.amazon.com/Lifetime-Univ...37231&sr=8-11&keywords=magnetic+cd+slot+mount
NICE ONE ~ Like the design. I guess I'll have to ask my dad to buy one of this. He is still using a navigator when driving.
Does anyone know of any current or upcoming car mounts that would be good for this phone?
I currently use this one for my Note 4 and it OK at best. The phone is too heavy for it so it falls off my air vents from time to time (or swings off if I turn to fast lol).
https://www.amazon.com/WizGear-Universal-Swift-Snap-Technology-Smartphones/dp/B00PGJWYJ0/
Would rather not use this for the Note 8 as I know the glass is more fragile.
this is the best mount I've found so far. I use it with my s8+ and it's never fallen off.
https://www.amazon.com/dp/B01M4J0G7I/ref=cm_sw_r_cp_apap_wsC6B9f2K5C4r
If you don't mind giving up a cup holder this is the best mount I've ever used.
https://www.amazon.com/gp/aw/d/B00F0IQTE8/ref=mp_s_a_1_3?ie=UTF8&qid=1503712559&sr=8-3&pi=AC_SX236_SY340_FMwebp_QL65&keywords=ikross+cup+mount+holder&dpPl=1&dpID=51xVyfDYDuL&ref=plSrch
I would highly recommend any one of the osomounts from Amazon. I have owned one myself for around four years and it's so strong, it requires a good amount of force to pull of the glass, really good mount.
Will be waiting a little bit more before getting a car mount but I might use the WizGear mount
Ram Mount X grip. Have had one in my car for 5 years now.
barry99705 said:
Ram Mount X grip. Have had one in my car for 5 years now.
Click to expand...
Click to collapse
Totally agree
https://www.amazon.com/Suction-Univ...coding=UTF8&psc=1&refRID=TP1MZNE8F4TV0GK4T6GK
EXCELLENT mount
KLLSWITCH said:
this is the best mount I've found so far. I use it with my s8+ and it's never fallen off.
https://www.amazon.com/dp/B01M4J0G7I/ref=cm_sw_r_cp_apap_wsC6B9f2K5C4r
Click to expand...
Click to collapse
I am always a bit worried about these kinds of car mounts as I've seen the horror stories of them leaving marks or taking off chunks of the dash material. Do you mount yours on the window or dash?
mikebz5 said:
If you don't mind giving up a cup holder this is the best mount I've ever used.
https://www.amazon.com/gp/aw/d/B00F0IQTE8/ref=mp_s_a_1_3?ie=UTF8&qid=1503712559&sr=8-3&pi=AC_SX236_SY340_FMwebp_QL65&keywords=ikross+cup+mount+holder&dpPl=1&dpID=51xVyfDYDuL&ref=plSrch
Click to expand...
Click to collapse
Oh this would actually work well for my SO's bmw. Ty!
Ryya said:
I would highly recommend any one of the osomounts from Amazon. I have owned one myself for around four years and it's so strong, it requires a good amount of force to pull of the glass, really good mount.
Click to expand...
Click to collapse
barry99705 said:
Ram Mount X grip. Have had one in my car for 5 years now.
Click to expand...
Click to collapse
kangi26 said:
Totally agree
https://www.amazon.com/Suction-Univ...coding=UTF8&psc=1&refRID=TP1MZNE8F4TV0GK4T6GK
EXCELLENT mount
Click to expand...
Click to collapse
The thing is that I'd rather avoid mounting of the glass but maybe I'll look into it.
refusedchaos said:
I am always a bit worried about these kinds of car mounts as I've seen the horror stories of them leaving marks or taking off chunks of the dash material. Do you mount yours on the window or dash?
Oh this would actually work well for my SO's bmw. Ty!
The thing is that I'd rather avoid mounting of the glass but maybe I'll look into it.
Click to expand...
Click to collapse
They also have a mount that fits into a cup holder too
Cupholder mount is on sale now at the link above 60% off! I just bought 2 for work vehicles!
Choetech_official said:
CHOETECH has a cheaper one at $3.99 with code. Only one day left.
Code: 8ESTIKT7
Link: https://www.amazon.com/dp/B01JRYA4LE/
Click to expand...
Click to collapse
.
Thanks for sharing offer code.
These folks offer the best mounts, IMO.
https://exogear.com/exomount-car-mounts/
Been using the same one for years.
Best one with one exception
https://www.amazon.com/Universal-Ma...562&sr=1-13&keywords=magnetic+phone+car+mount
The connection between the phone and mount were great, even with the battery pack on it. However between the car and mount wasn't great, so I added sugru and now its the best one i ever had.
Any good fast wireless charging vent mounts out there? Not looking for the magnetic ones, just a nice small simple one with grips on the side that a Note 8 will fit in.
Sent from my SM-G935T using Tapatalk
mardukeme said:
Any good fast wireless charging vent mounts out there? Not looking for the magnetic ones, just a nice small simple one with grips on the side that a Note 8 will fit in.
Sent from my SM-G935T using Tapatalk
Click to expand...
Click to collapse
I am looking for one too. The metal plate will prevent wireless charging to work. I will certainly let you know when I find one.
There is only one car mount anyone should ever buy, and that's the Craigsdocks mount:
http://www.craigsdocks.com/
Pay the money for it once and you'll never need to buy another! I hated the thought of universal docks until I tried this thing out. Owner is super nice, will reply to your questions with personalized videos if necessary, and this thing just works better than anything else on the market - trust me, I drive for a living, I'm in the car between 30-50K miles a year. I know what works and what doesn't!
http://www.niteize.com/product/Steelie-Car-Mount-Kit.asp
I live down 15 miles of real bad dirt road, and have been using these for 6 months now. Not once has my phone fallen off.
Sent from my SM-N950U using Tapatalk
To me, the best mount is the Pro Clip. You need two pieces, the vehicle specific mount and the phone holder. I use a large universal since I change phones a lot.
CD mount with Qi charging
I ordered this from eBay. I will take the gamble for $12.59. CD mount with Qi charging.
http://www.ebay.com/itm/Qi-Wireless...var=531678811733&_trksid=p2057872.m2749.l2649
I have recently bought the magnetic mount by Spigen. It allows me to adjust my Galaxy Note 8 in any direction with its 360 degree adjustable nature. Using this mount is proved very comfortable for me. Hence, I recommend it to you also.