Database Develop

Make Any Windows 7 Upgrade media work as a Full Version.

Hey Guys,
I found a way to get any version of Windows 7 upgrade disk to act as a full version. So this means that you can install it on a Virgin untouched Hard drive without having to install a previous version. And save money too I might add since your upgrade media will act as a full version. AS A NOTE: WHEN YOU INSTALL AND ASKS FOR THE SERIAL. DO NOT ENTER ANYTHING AND KEEP BLANK. CREDIT TO PAUL THURROTT'S Super SITE FOR WINDOWS www.winsupersite.com
Registry hack
Open regedit.exe with Start Menu Search and navigate to:
HKEY_LOCAL_MACHINE/Software/Microsoft/Windows/CurrentVersion/Setup/OOBE/
Change MediaBootInstall from "1" to "0". (Double-click it and then enter 0 in the dialog that appears.)
Close RegEdit.
Open the Start Menu again and type cmd in Start Menu search to display a shortcut to the Command Line utility. Right-click this shortcut and choose "Run as administrator." Handle the UAC prompt.
In the command line window, type: slmgr /rearm
Then tap ENTER and wait for the "Command completed successfully" dialog.
Then, close the command line window and reboot. When Windows 7 reboots, run the Activate Windows utility, type in your product key and activate windows.
You're all set. You're done. Congratulations.
Let Me know if you tried it. It worked for me fine.

How to install Android Wear launcher on your Galaxy Gear! (Ported from Android Wear)

I found a way to install Android Wear launcher in my Galaxy Gear!
(It is ported from Android Wear).
1. Go to Settings in your Galaxy Gear.
2. Tap Gear Info and check USB Debug.
3. Connect it to your computer, make sure the battery is not low!
4. Download fastboot.zip from attachments and extract it (Make sure you saved it in your Downloads folder) (do not change the name of files)
5. Download Android Wear Launcher from attachments (make sure it is in fastboot folder) (do not change the name of file!)
6. Move apk file to fastboot folder (where you extracted fastboot)
7. Download Samsung USB Drivers for mobile phones (google it)
8. After installing Samsung USB Drivers, unplug gear and plug it again.
9. Open CMD (Command Prompt) as administrator, type
cd Downloads and press enter.
cd fastboot and press enter.
adb devices and press enter.
You will get usb debugging in your gear after typing adb devices in cmd. Press OK in your gear.
after typing adb devices your device will show up in cmd.
type chmod 755 * and press enter.
type adb install "com.google.android.wearablepreview.app-KKWT-1077241.apk" and press enter.
wait and the apk will be install in your gear.
if you did everything right, command prompt will show 'success'.
Open your gear and go to apps, find Android wear and open it. You will now use Android wear launcher in your gear!
You can do the same method to install other apks, i installed nova launcher in my gear too.
Thanks for reading! If it is helped press thanks button

Can we get a few screenshots?

1. This requires Android 4.4 - Samsung's Android version wasn't 4.4 and f0mey's null is 4.2.2 so it can not be installed
2. This is old. Dates back to March
3. It's only a launcher, so likely will not have any of the features everyone wants from Wear (Voice, etc)
I think you got too excited and posted this without doing it yourself.

Wearable widgets looks like a cool concept, too bad its only for Tizen for now.

simple solution is downgrade back to android, install null23, then install google launcher with now and you have android wear lmao very simple im running it now and everything works

Help
I did as you said, cmd keeps giving the error: protocol fault <no status>. after i enter in adb devices. any help would be appreciated. Thank you!

This will work with gear 2 Neo? I liked have a wear launcher

tizen
sultanlialif12 said:
I found a way to install Android Wear launcher in my Galaxy Gear!
(It is ported from Android Wear).
1. Go to Settings in your Galaxy Gear.
2. Tap Gear Info and check USB Debug.
3. Connect it to your computer, make sure the battery is not low!
4. Download fastboot.zip from attachments and extract it (Make sure you saved it in your Downloads folder) (do not change the name of files)
5. Download Android Wear Launcher from attachments (make sure it is in fastboot folder) (do not change the name of file!)
6. Move apk file to fastboot folder (where you extracted fastboot)
7. Download Samsung USB Drivers for mobile phones (google it)
8. After installing Samsung USB Drivers, unplug gear and plug it again.
9. Open CMD (Command Prompt) as administrator, type
cd Downloads and press enter.
cd fastboot and press enter.
adb devices and press enter.
You will get usb debugging in your gear after typing adb devices in cmd. Press OK in your gear.
after typing adb devices your device will show up in cmd.
type chmod 755 * and press enter.
type adb install "com.google.android.wearablepreview.app-KKWT-1077241.apk" and press enter.
wait and the apk will be install in your gear.
if you did everything right, command prompt will show 'success'.
Open your gear and go to apps, find Android wear and open it. You will now use Android wear launcher in your gear!
You can do the same method to install other apks, i installed nova launcher in my gear too.
Thanks for reading! If it is helped press thanks button
Click to expand...
Click to collapse
Will this work on tizen?

kennethclaxton said:
Will this work on tizen?
Click to expand...
Click to collapse
Nope

ROOT Zenfone 4 (A400CG) WW-ASUS_T00I-WW-7.3.3.0

WARNING : THIS METHOD IS JUST FOR ZENFONE 4 T00I WITH Build Number 6.6.3.
If you have no idea how to know what build number your device are running, go to Setting > About Phone > Software Information.
The Build number must be contain with these : WW_ZenFone-V6.6.3
This method for people who get error command (or Robot with Red Sign) after flashing update with Root file via Droidboot/Fastboot. Now i will show you how to fix that with flashing custom recovery temporarily before flashing the root file. But first thing, you have to download these file :
- Intel USB Driver for Android Devices (Google it)
- Platform-Tool (or ADB Tools if you will), TWRP and Root File : drive[dot]google[dot]com/drive/folders/0B-TAWFRNxvPcZm55NVJ5RjYwdVk (change the [dot] with "." without quote, i'm still new here as silent reader btw )
- Asus Unlock Bootloader (same google drive link, after download it copy to your sdcard or internal storage)
Click to expand...
Click to collapse
Before you follow the instruction, you have to unlock your bootloader (if you new here and don't know what i mean). If you have unlock the bootloader then skip this !!
***Unlocking Bootloader***
Downlaod "Unlock_Tool_A400_v8.1.apk" and copy it to your sdcard or internal storage.
On your device, go to File Manager and install the app. If you get a warning message then :
Click on Option at the message > Scroll a little bit until you found "Unknown sources". Tick that box and go repeat step #2
Open the app, pretending you have read the User Agreement by quick scroll to the very bottom, check the box and click Ok
Quick scroll again, tick the box Accept and click "Press to unlock your devices"
If you get a warning message just click Ok, and your device should be restart automaticly after you finish reading this step.
Click to expand...
Click to collapse
That's it, now your devices Bootloader is unlock, now continue to the next instruction.
Follow this (NEWBIE FRIENDLY)
1. Install Intel USB Driver.
2. Enable Developer Option
Go to Setting > About Phone > Software Information. Tap the build number 7x or more until the text pop up "You are now a developer".
3. Go back to Setting > Developer Options. Scroll down a little bit until you find "Enable USB Debugging" check the box.
4. Extract the platform-tools somewhere (e.g. Desktop), then copy twrp_recovery-V3.img and Root file into the platform-tools folder. DO NOT EXTRACT THE ROOT FILE
5. Now plug in your device to your PC
6. Go to the platform-tools folder, now do this : Hold [SHIFT] + Right Click, choose and click "open command window here".
7. Check if the devices is connected by entering this command : adb devices
If it says "xxxxxxxxxxx unauthorized" then go look to your screen, check the boxes and grant / accept.
8. Do step 7 again, if command prompt now shows "xxxxxxxxxxx devices" now continue to the next step.
9. Enter this command first : adb reboot bootloader. Now your device should restart automaticly to the Droidboot mode.
10. After your device screen shows a Droidboot mode, enter this command prompt :
fastboot devices
fastboot flash recovery twrp_recovery-V3.img
fastboot flash update root_zenfone4_v2.zip
Click to expand...
Click to collapse
11. Your phone should be restart after entering the final command, and then your device will go to the TWRP recovery mode and installing the root file.
FINISH !! Your phone now is rooted. Check your menu for "SuperSu" app installed after doing this method, if it want to update just click ok and click normal. Sorry for bad explaination or my english is a little bit crap.

Zte Axon 20 (a2121) 5g

A lot of work was done with the Chinese Zte A2121 but it worked

[email protected] said:
Zte Axon 20 CN version Working Google Play & multilanuage I was able to modify it.
Click to expand...
Click to collapse

Photo

I want multilenguage rom (spanish), how do you make multilenguage?? Morelocale2 or any other app??

MoreLocale 2 you connect the phone in debug mode you use the command console with adb & fastboot. You enter adb devices, confirm on the phone screen adb connection, in response you will get a number and the text device, enter the adb shell command and confirm with enter, then enter the command
pm grant jp.co.c_lis.ccl.morelocale android.permission.CHANGE_CONFIGURATION and confirm. From now on, you can choose any language in MoreLocale2, including the entire telephone interface, including settings. You also have to do this every time Axon is restarted but it works

[email protected] said:
MoreLocale 2 you connect the phone in debug mode you use the command console with adb & fastboot. You enter adb devices, confirm on the phone screen adb connection, in response you will get a number and the text device, enter the adb shell command and confirm with enter, then enter the command
pm grant jp.co.c_lis.ccl.morelocale android.permission.CHANGE_CONFIGURATION and confirm. From now on, you can choose any language in MoreLocale2, including the entire telephone interface, including settings. You also have to do this every time Axon is restarted but it works
Click to expand...
Click to collapse
that's the way I´ll do.. thnx!!

How to get Google Discover on your home screen

Note: I've only tried this on Oppo Find X2 Lite running Color OS 11.1 (Android 11), and I'm not responsible if you screw up something.
Note: you don't have to revert before every monthly update. But just to be safe, revert back before a major software update (like the Android 12 update).
This method doesn't require root nor a custom recovery. it's simple and you can revert back if you wish.
The reason why we can't get the Google Discover Feed on the home screen is because of Oppo's Smart Assistant app. So we'll be uninstalling it (kinda, see Note 2 at the end of the post), as soon as that's done, you'll get the Discover feed on the left page of your home screen (of course you'll need to have the Google app installed). If you would like to get Smart Assistant back, follow the steps in the To Revert back section.
By the way, if you don't want to bother with Command prompt, you can always just use a custom launcher like Lawnchair, that will give you the ability to use Google Discover without any ADB commands. If you want the safest route, go with this.
Steps:
1- Enable Developer Options (by going to Settings>About Phone>Version then clicking Build Number a bunch of times).
2- On your PC, download Platform Tools from this link: https://developer.android.com/studio/releases/platform-tools .
3- Extract the zip file to a folder.
4- Copy the path to that folder, then open open Command Prompt as an administrator and type "cd (the path you copied)" (example: cd C:/platform-tools ).
5- Enable ADB Debugging (by going to Settings>Additional Settings>Developer options then enable USB debugging).
6- Plug your phone to your PC, then change the connection method on your phone to "Transfer Files / Android Auto".
7- A pop-up saying " Allow USB debugging? " will appear, click Allow.
8- On your the command prompt window on your PC, type "adb devices" , you should see: "[your serial number] device".
9- Now type
Code:
adb shell pm uninstall -k --user 0 com.coloros.assistantscreen
and hit enter, wait for it to finish.
10- Reboot your phone, you should see the Discover Feed on the the left screen. Enjoy !
To Revert back:
If you want to bring back Smart Assistant, repeat steps 4 through 8, then type in command prompt
Code:
adb shell cmd package install-existing com.coloros.assistantscreen
Notes:
- After you're done, I recommend going back to Settings>Additional Settings>Developer options and disabling USB Debugging.
- The command doesn't actually delete the app from the phone, it just removes it for the main user, i.e. you.
- the monthly system updates don't bring back Smart Assistant, but I'd recommend reverting back before updating to Android 12 (if we're getting it ).
Full credit goes to @klanbo78 for this, thank you so much !

Thanks for the guide!
Have you been able to test it out on ColorOS 12?

zonzo3 said:
Thanks for the guide!
Have you been able to test it out on ColorOS 12?
Click to expand...
Click to collapse
I still didn't receive the ColorOS 12 update on my device. Although I can confirm that this still works in the ColorOS 11.1 March 2022 update.
Have you managed to receive the ColorOS 12 update on this device? if so, would you mind mentioning from which country?