Related
In my Nexus One, can access fastboot, after flashing cwm, it stuck at X-boot logo, though i can access adb shell but that too hangs later.
When i try
Code:
fastboot oem listpartition
output is
Code:
(bootloader) [radio]:(OTHER) block start=0, size=497 (63616 KB)
(bootloader) [hboot]:(RAW) block start=497, size=6 (768 KB)
(bootloader) [misc]:(RAW) block start=503, size=7 (896 KB)
(bootloader) [mfg]:(RAW) block start=510, size=6 (768 KB)
(bootloader) [sp1]:(RAW) block start=516, size=9 (1152 KB)
(bootloader) [wifi]:(RAW) block start=525, size=5 (640 KB)
(bootloader) [recovery]:(RAW) block start=530, size=32 (4096 KB)
(bootloader) [boot]:(RAW) block start=562, size=28 (3584 KB)
(bootloader) [system]:(YAFFS) block start=590, size=1160 (153120 KB)
(bootloader) [cache]:(YAFFS) block start=1750, size=760 (100320 KB)
(bootloader) [userdata]:(YAFFS) block start=2510, size=1570 (207240 KB)
(bootloader) [crashdata]:(YAFFS) block start=0, size=0 (0 KB)
(bootloader) [spcustom]:(RAW) block start=4080, size=16 (2048 KB)
(bootloader) [cpld]:(OTHER) block start=0, size=0 (0 KB)
(bootloader) [microp]:(OTHER) block start=0, size=0 (0 KB)
(bootloader) [a1026]:(OTHER) block start=0, size=0 (0 KB)
(bootloader) [tp]:(OTHER) block start=0, size=0 (0 KB)
(bootloader) [wimax]:(RAW) block start=0, size=0 (0 KB)
(bootloader) [nv]:(OTHER) block start=0, size=0 (0 KB)
(bootloader) [tp_atmel]:(OTHER) block start=0, size=0 (0 KB)
the partiton are as follows
Code:
0 /tmp ramdisk (null) (null)
1 /boot mtd boot (null)
2 /cache yaffs2 cache (null)
3 /data yaffs2 userdata (null)
4 /misc mtd misc (null)
5 /recovery mtd recovery (null)
6 /sdcard vfat /dev/block/mmcblk0p1 /dev/block/mmcblk0
7 /system yaffs2 system (null)
8 /sd-ext ext4 /dev/block/mmcblk0p2 (null)
I tried
Code:
parted mtdblock1 print
(applies to all partition)
but it says unrecognised label and when i try to set label using parted it says I/O error for mtdblock1 (again applies to all partition)
In short
1. I have fastboot access
2. Flashed twrp, cwm, amon ra's recovery none of them boot always, some times amon ra boots but when i try to wipe, it stucks and i have to pull out the battery
3. sometimes adb shell access, though phone is stuck at boot logo while booting into recovery but can access adb shell
4. external sdcard is already there
5. while flashing system partiton, it stucks and cannot flash it. rest partiton can be flashed.
What i believe is /dev/block/mtdblock is not recognised so thats the real problem..(just a guess)
Any help is highly appreciated
Have you tried flashing a stock passimg.zip? Have you tried flashing ROM through fastboot? Have you tried to wipe partitions in fastboot and see if any hang? This guide may help a bit
http://forum.xda-developers.com/showthread.php?p=41374534
Sent from my Nexus 4 using xda premium
yeah, tried that too, but again it hangs while writing system.img partition in PASSIMG.zip method
fastboot update update.zip also hangs while writing system.img
fastboot erase is not successful when on stock hboot (S-on) .
After installing blackrose hboot(S-off), when i erase boot, system, recovery, userdata, erase is successful.
unfortunetly it is looking like your system partition may be corrupt, i would attempt to format it if you can, simple way would be with 4ext recovery
If that doesnt work you can try fastboot
If that doest work (this is risky) you can try dd command
or less risky maybe mke2fs ? something like
Code:
adb shell
mke2fs /dev/block/mmcblk0p25
reboot recovery
but check that... for get system partition at the moment... think thats right but kinda having a brain_fart
if nothing above works you may need jtag... ill let you know if i think of something else though
good luck!
Edit
Just reread your post, you said erase system was successful? If so try again to flash a stock passimg.zip and see what happens, may also want to try it with stock hboot and fastboot oem lock
demkantor said:
unfortunetly it is looking like your system partition may be corrupt, i would attempt to format it if you can, simple way would be with 4ext recovery
If that doesnt work you can try fastboot
If that doest work (this is risky) you can try dd command
or less risky maybe mke2fs ? something like
Code:
adb shell
mke2fs /dev/block/mmcblk0p25
reboot recovery
but check that... for get system partition at the moment... think thats right but kinda having a brain_fart
if nothing above works you may need jtag... ill let you know if i think of something else though
good luck!
Edit
Just reread your post, you said erase system was successful? If so try again to flash a stock passimg.zip and see what happens, may also want to try it with stock hboot and fastboot oem lock
Click to expand...
Click to collapse
I tried 4ext recovery but after flashing it, it also doesn't boot.
PASSIMG.zip method still hangs at writing system
Do you get an error when flashing the recovery? Can you list all info on bootloader?
Sent from my Nexus 4 using xda premium
demkantor said:
Do you get an error when flashing the recovery? Can you list all info on bootloader?
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 7.35.5017
(bootloader) version-baseband: 4.02.02.14
(bootloader) version-cpld: None
(bootloader) version-microp: 0c15
(bootloader) version-main:
(bootloader) serialno: HT08NP802443
(bootloader) product: nexusone
(bootloader) platform: HBOOT-8x50
(bootloader) modelid: PB9910000
(bootloader) cidnum: KT___901
(bootloader) battery-status: good
(bootloader) battery-voltage: 4109mV
(bootloader) partition-layout: STOCK-145/95/196
(bootloader) security: off
(bootloader) build-mode: ENG
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 0c3a097c
(bootloader) hbootpreupdate: 11
Hboot is Blackrose.
puran157 said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 7.35.5017
(bootloader) version-baseband: 4.02.02.14
(bootloader) version-cpld: None
(bootloader) version-microp: 0c15
(bootloader) version-main:
(bootloader) serialno: HT08NP802443
(bootloader) product: nexusone
(bootloader) platform: HBOOT-8x50
(bootloader) modelid: PB9910000
(bootloader) cidnum: KT___901
(bootloader) battery-status: good
(bootloader) battery-voltage: 4109mV
(bootloader) partition-layout: STOCK-145/95/196
(bootloader) security: off
(bootloader) build-mode: ENG
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 0c3a097c
(bootloader) hbootpreupdate: 11
Hboot is Blackrose.
Click to expand...
Click to collapse
result of mke2fs
mke2fs /dev/block/mtdblock3
mke2fs 1.40.8 (13-Mar-2008)
Warning: could not erase sector 2: Attempt to write block from filesystem resulted in short write
Filesystem label=
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
37240 inodes, 148480 blocks
7424 blocks (5.00%) reserved for the super user
First data block=1
Maximum filesystem blocks=67371008
19 block groups
8192 blocks per group, 8192 fragments per group
1960 inodes per group
Superblock backups stored on blocks:
8193, 24577, 40961, 57345, 73729
Warning: could not read block 0: Attempt to read block from filesystem resulted in short read
Warning: could not erase sector 0: Attempt to write block from filesystem resulted in short write
Writing inode tables: 0/19
Could not write 8 blocks in inode table starting at 261: Attempt to write block from filesystem resulted in short write
Looking as if your emmc is highly corrupted, I'm becoming doubtful if even jtag would fix it. You can keep trying to format or flash a new bootloader but sorry to say it looks like you may be finished
The good thing is that you can get a broken n1 real cheap now a days and just swap logic boards, simple to do and eBay has many
Sent from my Nexus 4 using xda premium
demkantor said:
Looking as if your emmc is highly corrupted, I'm becoming doubtful if even jtag would fix it. You can keep trying to format or flash a new bootloader but sorry to say it looks like you may be finished
The good thing is that you can get a broken n1 real cheap now a days and just swap logic boards, simple to do and eBay has many
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
I scanned all mtdblock using emmc-scanner and it says the all are okay. Pls suggest.
Boot into hboot, write down everything word for word herr
Sent from my Nexus 4 using xda premium
demkantor said:
Boot into hboot, write down everything word for word herr
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
****Unlocked****
NEXUSONE PVT S-ON
HBOOT-0.35.0017
MICROP-0C15
TOUCH PANEL-SYNT0103
RADIO-4.02.02.14
HBOOT
<VOL UP>...BLAH BLAH
FASTBOOT
RECOVERY
CLEAR STORAGE
SIMLOCK
Try installing blackrose with a large system partition and then see if you can flash a recovery through fastboot. Suggest amonra
Once both are complete immediately boot to recovery and try to flash a known stable ROM like cm7 and gapps, if it flashes reboot right away and let it sit for like 10min or more
If you can, confirm md5sums of everything
Sent from my Nexus 4 using xda premium
demkantor said:
Try installing blackrose with a large system partition and then see if you can flash a recovery through fastboot. Suggest amonra
Once both are complete immediately boot to recovery and try to flash a known stable ROM like cm7 and gapps, if it flashes reboot right away and let it sit for like 10min or more
If you can, confirm md5sums of everything
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
That too dint helped.. Flash was stuck in between, though can boot amon ra recovery after flashing it into boot partition instread of recovery partition
and have adb shell access too..
Code:
fastboot flash:raw boot amonrarecovery.img
Can you pls explain me the "dd command method" for creating new partition table or formating the existing partitions.
P.S. wiping cache, data works in amon ra but wiping dalvik cache again stucks and have to pull out the battery.
this is for resize phone partiton: http://forum.xda-developers.com/showthread.php?t=1270589&highlight=black+rose
format partition:
Code:
fastboot -w
and format recovery before flash it again:
Code:
fastboot erase recovery
fastboot reboot-booloader
fastboot flash recovery "link to recovery image"
fastboot reboot-booloader
sometimes you cant boot into recovery after flash it, just turn off the phone after flash recovery and wait 5-10 mins
try with 4ext recovery
Is it possible to partition sdcard and make system, data, cache partition and install os into that?
it would be something like
dd if=/dev/zero of=/dev/mmcblk0p25
dd if=/dev/zero of=/dev/mmcblk0p26
dd if=/dev/zero of=/dev/mmcblk0p27
but be careful with dd commands, I dont recommend using them unless you full understand what you are doing, this is why i hardly ever use them for formatting as I dont fully understand them
and yes it would probably be possible to run os of sd, as in it has been done on similar devices. take a look here
http://forum.xda-developers.com/showthread.php?t=1572924
demkantor said:
it would be something like
dd if=/dev/zero of=/dev/mmcblk0p25
dd if=/dev/zero of=/dev/mmcblk0p26
dd if=/dev/zero of=/dev/mmcblk0p27
but be careful with dd commands, I dont recommend using them unless you full understand what you are doing, this is why i hardly ever use them for formatting as I dont fully understand them
and yes it would probably be possible to run os of sd, as in it has been done on similar devices. take a look here
http://forum.xda-developers.com/showthread.php?t=1572924
Click to expand...
Click to collapse
I tried the above commands for mtdblock but no success, says, I/O error.
thats an input/output error, like i said i dont use dd commands much and if you plan to use then for sure research first as i cant assure you what i said is correct and i certainly didnt study much myself on it.
Im real sorry to say but there isnt much you havent tried and jtag may be your only hope. i guess you can try
fastboot oem rebootRUU and see if that will take stock ROM (may need to relock bootloader first though)
but i really doubt this will do you any good as nothing else wants to go
I can boot into Amon Ra's Recovery but, when it stucks after some operation, i have done factory reset using that recovery. Still, flashing system partition hangs (say @ 20% my guess as per the bar progress at the right top corner in the device screen in fastboot mode ).
God bless me and my phone.
Hello,
I have a m7_u that wont boot up, I tried few custom roms by sideload, and aroma backups but nothing helped. every thing goes fine but after few min on the first lockscreen it reboots.
any thing I can try?
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.401.9
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: **************
(bootloader) imei: **************
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__K18
(bootloader) battery-status: good
(bootloader) battery-voltage: 3648mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
deadwolf666 said:
Hello,
I have a m7_u that wont boot up, I tried few custom roms by sideload, and aroma backups but nothing helped. every thing goes fine but after few min on the first lockscreen it reboots.
any thing I can try?
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.401.9
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__K18
(bootloader) battery-status: good
(bootloader) battery-voltage: 3648mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Click to expand...
Click to collapse
Remove the s/n and imei please!!!
What Rom are you running at the minute? When installing the Rom did it say it was complete and did you do a full wipe?
---------- Post added at 12:57 PM ---------- Previous post was at 12:56 PM ----------
stovie_steve said:
Remove the s/n and imei please!!!
What Rom are you running at the minute? When installing the Rom did it say it was complete and did you do a full wipe?
Click to expand...
Click to collapse
Also what is the status of your bootloader - locked or unlocked? And have you installed any custom firmware?
stovie_steve said:
Remove the s/n and imei please!!!
What Rom are you running at the minute? When installing the Rom did it say it was complete and did you do a full wipe?
---------- Post added at 12:57 PM ---------- Previous post was at 12:56 PM ----------
Also what is the status of your bootloader - locked or unlocked? And have you installed any custom firmware?
Click to expand...
Click to collapse
At the moment I flashed Guru_Reset_M7_3.62.401.1.zip with no root, It was complete successfully and I fully wiped. tried to boot directly after flash also after installing stock recovery )from the zip file) and locking the bootloader.
deadwolf666 said:
At the moment I flashed Guru_Reset_M7_3.62.401.1.zip with no root, It was complete successfully and I fully wiped. tried to boot directly after flash also after installing stock recovery )from the zip file) and locking the bootloader.
Click to expand...
Click to collapse
Try the 2.24.401.8 guru reset - I'm wondering if that one you flashed is for the latest firmware and latest hboot
Try that and see how it goes
After that I would run rumrunner for 2.24.401.8 to get s-off, remove tampered and lock the bootloader using the adb shell command then update via OTA
stovie_steve said:
Try the 2.24.401.8 guru reset - I'm wondering if that one you flashed is for the latest firmware and latest hboot
Try that and see how it goes
After that I would run rumrunner for 2.24.401.8 to get s-off, remove tampered and lock the bootloader using the adb shell command then update via OTA
Click to expand...
Click to collapse
Same after 2.24.401.8 stuck on the first lockscreen, I changed the cid to 11111111 with riff box but same result.
deadwolf666 said:
Same after 2.24.401.8 stuck on the first lockscreen, I changed the cid to 11111111 with riff box but same result.
Click to expand...
Click to collapse
Try this guide I wrote. Use the appropriate firmware. I know you are not S-OFF but try and wipe as much as possible before reinstalling everything.
Which firmware are you using ? And what ROM are you installing ?
attanasi0 said:
Try this guide I wrote. Use the appropriate firmware. I know you are not S-OFF but try and wipe as much as possible before reinstalling everything.
Which firmware are you using ? And what ROM are you installing ?
Click to expand...
Click to collapse
Cant find any firmware\RUU\Nand (Stock ot not) to match and cant get s-off. 2.24.401.8 wont work and net next one is 3.XX...\
Also I can erase only the cache partition.
deadwolf666 said:
Cant find any firmware\RUU\Nand (Stock ot not) to match and cant get s-off. 2.24.401.8 wont work and net next one is 3.XX...\
Also I can erase only the cache partition.
Click to expand...
Click to collapse
We'll just try it without updating the firmware, then once you have S-OFF you'll be able to make everything work.
Just do the Reinstalling Recovery and Installing Custom ROM portion of the guide.
attanasi0 said:
We'll just try it without updating the firmware, then once you have S-OFF you'll be able to make everything work.
Just do the Reinstalling Recovery and Installing Custom ROM portion of the guide.
Click to expand...
Click to collapse
No matter what I try to install I cant get pass the lock screen, the phone just reboots (also after minute)
deadwolf666 said:
Same after 2.24.401.8 stuck on the first lockscreen, I changed the cid to 11111111 with riff box but same result.
Click to expand...
Click to collapse
deadwolf666 said:
Cant find any firmware\RUU\Nand (Stock ot not) to match and cant get s-off. 2.24.401.8 wont work and net next one is 3.XX...\
Also I can erase only the cache partition.
Click to expand...
Click to collapse
1- How did you chance CID if you're not S-Off
2- rumrunner should work to get s-off for you (provided u are on a 2.24.401.x rom and rooted), it did for two others with HTC__K18 and 2.24 ROM/firmware
nkk71 said:
1- How did you chance CID if you're not S-Off
2- rumrunner should work to get s-off for you (provided u are on a 2.24.401.x rom and rooted), it did for two others with HTC__K18 and 2.24 ROM/firmware
Click to expand...
Click to collapse
1- Jtag with riff box..
2- Cant run any Soff method if the wont boot normally, It wont get to the main screen so I cant debug also it wont stay on for more then 1 min or so
deadwolf666 said:
No matter what I try to install I cant get pass the lock screen, the phone just reboots (also after minute)
Click to expand...
Click to collapse
You have to be on the white Fastboot screen. If that doesn't load it doesn't look good but it did since you said you were able to erase cache.
So go into Fastboot and do this :
Download this
Hold the Volume-Down button
Hold the Power button for around 10 seconds
Release the Power button (but keep Volume-Down pressed)
You should see something similar to this :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Using the Volume buttons and the Power button, select Fastboot and make sur FASTBOOT USB shows up (like on the picture)
To make sure fastboot is properly connected, use
Code:
fastboot devices
If the results show up as positive, then use
Code:
fastboot flash recovery [pathonyourcomputer/recovery.img]
Using the Volume buttons, select Bootloader and then select Recovery.
Select the option "Wipe data/factory reset" (You will loose everything not previously backed up outside the phone.)
Select "Wipe Cache partition"
Select "Advanced -> Wipe Dalvik Cache"
While in recovery, type
Code:
adb push [path/rom.zip] /sdcard/rom.zip
Select "Install zip"
Select "Choose zip from sdcard"
Voila ! You should be good to go !
deadwolf666 said:
1- Jtag with riff box..
2- Cant run any Soff method if the wont boot normally, It wont get to the main screen so I cant debug also it wont stay on for more then 1 min or so
Click to expand...
Click to collapse
but flashing is going normal? have you tried factory reset and format/wipe /data and /data/media (/sdcard) then install? also try changing recovery, which one and version are you on?
attanasi0 said:
You have to be on the white Fastboot screen. If that doesn't load it doesn't look good but it did since you said you were able to erase cache.
So go into Fastboot and do this :
Download this
Hold the Volume-Down button
Hold the Power button for around 10 seconds
Release the Power button (but keep Volume-Down pressed)
You should see something similar to this :
Using the Volume buttons and the Power button, select Fastboot and make sur FASTBOOT USB shows up (like on the picture)
To make sure fastboot is properly connected, use
Code:
fastboot devices
If the results show up as positive, then use
Code:
fastboot flash recovery [pathonyourcomputer/recovery.img]
Using the Volume buttons, select Bootloader and then select Recovery.
Select the option "Wipe data/factory reset" (You will loose everything not previously backed up outside the phone.)
Select "Wipe Cache partition"
Select "Advanced -> Wipe Dalvik Cache"
While in recovery, type
Code:
adb push [path/rom.zip] /sdcard/rom.zip
Select "Install zip"
Select "Choose zip from sdcard"
Voila ! You should be good to go !
Click to expand...
Click to collapse
nkk71 said:
but flashing is going normal? have you tried factory reset and format/wipe /data and /data/media (/sdcard) then install? also try changing recovery, which one and version are you on?
Click to expand...
Click to collapse
All is good I did flashed custom roms and guru nands (with every recovery I found - various versions of CWM and TWRP) but after I finish the phone gets to the first lock screen before the first wizard and then it reboots
deadwolf666 said:
All is good I did flashed custom roms and guru nands (with every recovery I found - various versions of CWM and TWRP) but after I finish the phone gets to the first lock screen before the first wizard and then it reboots
Click to expand...
Click to collapse
can you check you're /data partition please:
1- reboot into recovery, and connect to PC
2- confirm it's recognized "adb devices" -> should show your serial number
3- now do the following on your pc:
adb shell
~ # mount
~ # umount /data
~ # e2fsck -n -v -f /dev/block/mmcblk0p37
copy/paste the command prompt output (not screenshot, just copy/paste the text)
nkk71 said:
can you check you're /data partition please:
1- reboot into recovery, and connect to PC
2- confirm it's recognized "adb devices" -> should show your serial number
3- now do the following on your pc:
adb shell
~ # mount
~ # umount /data
~ # e2fsck -n -v -f /dev/block/mmcblk0p37
copy/paste the command prompt output (not screenshot, just copy/paste the text)
Click to expand...
Click to collapse
~ # mount
mount
rootfs on / type rootfs (rw)
tmpfs on /dev type tmpfs (rw,nosuid,relatime,mode=755)
devpts on /dev/pts type devpts (rw,relatime,mode=600)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
/dev/block/mmcblk0p36 on /cache type ext4 (rw,nodev,noatime,nodiratime,data=orde
red)
/dev/block/mmcblk0p37 on /data type ext4 (rw,nodev,noatime,nodiratime,data=order
ed)
~ # umount /data
umount /data
~ # e2fsck -n -v -f /dev/block/mmcblk0p37
e2fsck -n -v -f /dev/block/mmcblk0p37
e2fsck 1.41.14 (22-Dec-2010)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Directory inode 2, block #0, offset 0: directory corrupted
Salvage? no
e2fsck: aborted
Edit: after running # e2fsck -v -f /dev/block/mmcblk0p37 and pressing Yes for some fixes
~ # e2fsck -n -v -f /dev/block/mmcblk0p37
e2fsck -n -v -f /dev/block/mmcblk0p37
e2fsck 1.41.14 (22-Dec-2010)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
12 inodes used (0.00%)
0 non-contiguous files (0.0%)
0 non-contiguous directories (0.0%)
# of inodes with ind/dind/tind blocks: 0/0/0
Extent depth histogram: 3
150981 blocks used (2.22%)
0 bad blocks
1 large file
0 regular files
3 directories
0 character device files
0 block device files
0 fifos
0 links
0 symbolic links (0 fast symbolic links)
0 sockets
--------
3 files
deadwolf666 said:
~ # mount
mount
rootfs on / type rootfs (rw)
tmpfs on /dev type tmpfs (rw,nosuid,relatime,mode=755)
devpts on /dev/pts type devpts (rw,relatime,mode=600)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
/dev/block/mmcblk0p36 on /cache type ext4 (rw,nodev,noatime,nodiratime,data=orde
red)
/dev/block/mmcblk0p37 on /data type ext4 (rw,nodev,noatime,nodiratime,data=order
ed)
~ # umount /data
umount /data
~ # e2fsck -n -v -f /dev/block/mmcblk0p37
e2fsck -n -v -f /dev/block/mmcblk0p37
e2fsck 1.41.14 (22-Dec-2010)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Directory inode 2, block #0, offset 0: directory corrupted
Salvage? no
e2fsck: aborted
Edit: after running # e2fsck -v -f /dev/block/mmcblk0p37 and pressing Yes for some fixes
~ # e2fsck -n -v -f /dev/block/mmcblk0p37
e2fsck -n -v -f /dev/block/mmcblk0p37
e2fsck 1.41.14 (22-Dec-2010)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
12 inodes used (0.00%)
0 non-contiguous files (0.0%)
0 non-contiguous directories (0.0%)
# of inodes with ind/dind/tind blocks: 0/0/0
Extent depth histogram: 3
150981 blocks used (2.22%)
0 bad blocks
1 large file
0 regular files
3 directories
0 character device files
0 block device files
0 fifos
0 links
0 symbolic links (0 fast symbolic links)
0 sockets
--------
3 files
Click to expand...
Click to collapse
CRAP, corrupt data partition, let's hope it's not a hardware fault, repairing is OK, and should get you going, but I would recommend a full "real" format, gimme a few minutes and I'll post back with details.....
Hit the thanks button if I've helped
---------- Post added at 07:49 PM ---------- Previous post was at 07:16 PM ----------
deadwolf666 said:
~ # e2fsck -n -v -f /dev/block/mmcblk0p37
e2fsck -n -v -f /dev/block/mmcblk0p37
e2fsck 1.41.14 (22-Dec-2010)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Directory inode 2, block #0, offset 0: directory corrupted
Salvage? no
Click to expand...
Click to collapse
Ok, so here's how to "real" format the data partition: (thanks to @mike1986. for his article http://android-revolution-hd.blogspot.com/2013/10/fix-data-htc-one.html)
1- download this: http://goo.gl/pmZ9Mt
2- then push it to your phone: adb push mkfs.ext4 /tmp
3- open a shell:
adb shell
~# chmod 777 /tmp/mkfs.ext4
~# umount /data
Code:
~# [B]/tmp/mkfs.ext4 -b 4096 -O ^huge_file,^dir_nlink,^ext_attr,^resize_inode,^extra_isize -m 0 /dev/block/mmcblk0p37[/B]
(I have to enclose that in a code section, otherwise there's an extra space which should NOT be there)
the output should be similar to:
Code:
mke2fs 1.41.12 (17-May-2010)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
1703936 inodes, 6815744 blocks
0 blocks (0.00%) reserved for the super user
First data block=0
208 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 24 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
if all OK, you need to recreate media, so within the shell
~# mount /data
~# mkdir -p /data/media/0
exit the shell using ~# exit
finally push or sideload your rom, and flash it. if everything goes well, it will no longer reboot, if it does then it could be a hardware fault.
So far I've helped 3 people with this, two out of the three worked fine, the last one was a hardware fault.
nkk71 said:
CRAP, corrupt data partition, let's hope it's not a hardware fault, repairing is OK, and should get you going, but I would recommend a full "real" format, gimme a few minutes and I'll post back with details.....
Hit the thanks button if I've helped
---------- Post added at 07:49 PM ---------- Previous post was at 07:16 PM ----------
Ok, so here's how to "real" format the data partition: (thanks to @mike1986. for his article http://android-revolution-hd.blogspot.com/2013/10/fix-data-htc-one.html)
1- download this: http://goo.gl/pmZ9Mt
2- then push it to your phone: adb push mkfs.ext4 /tmp
3- open a shell:
adb shell
~# chmod 777 /tmp/mkfs.ext4
~# umount /data
Code:
~# [B]/tmp/mkfs.ext4 -b 4096 -O ^huge_file,^dir_nlink,^ext_attr,^resize_inode,^extra_isize -m 0 /dev/block/mmcblk0p37[/B]
(I have to enclose that in a code section, otherwise there's an extra space which should NOT be there)
the output should be similar to:
Code:
mke2fs 1.41.12 (17-May-2010)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
1703936 inodes, 6815744 blocks
0 blocks (0.00%) reserved for the super user
First data block=0
208 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 24 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
if all OK, you need to recreate media, so within the shell
~# mount /data
~# mkdir -p /data/media/0
exit the shell using ~# exit
finally push or sideload your rom, and flash it. if everything goes well, it will no longer reboot, if it does then it could be a hardware fault.
So far I've helped 3 people with this, two out of the three worked fine, the last one was a hardware fault.
Click to expand...
Click to collapse
Thanks for your help, I tried your guide but same result(restart after first screenlock) then I installed CM and I got pass the screenlock but it reboots after 2-5 minutes :\
deadwolf666 said:
Thanks for your help, I tried your guide but same result(restart after first screenlock) then I installed CM and I got pass the screenlock but it reboots after 2-5 minutes :\
Click to expand...
Click to collapse
did you format the partition as suggested? if so go back to post #16 and run e2fsck again, if it gives error again, then it's faulty hardware
The reason CM installs is because it doesnt use the /data partition, however after booting up, at some point it needs to use /data and if it's corrupt, it will reboot without any error message.
So if you did successfully format it, and e2fsck reports errors again after one or two reboots, then it's unfortunately a hardware issue.
nkk71 said:
did you format the partition as suggested? if so go back to post #16 and run e2fsck again, if it gives error again, then it's faulty hardware
The reason CM installs is because it doesnt use the /data partition, however after booting up, at some point it needs to use /data and if it's corrupt, it will reboot without any error message.
So if you did successfully format it, and e2fsck reports errors again after one or two reboots, then it's unfortunately a hardware issue.
Click to expand...
Click to collapse
Code:
~ # e2fsck -v -f /dev/block/mmcblk0p37
e2fsck -v -f /dev/block/mmcblk0p37
e2fsck 1.41.14 (22-Dec-2010)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
2147 inodes used (0.13%)
207 non-contiguous files (9.6%)
2 non-contiguous directories (0.1%)
# of inodes with ind/dind/tind blocks: 0/0/0
Extent depth histogram: 2031/8
193238 blocks used (2.84%)
0 bad blocks
0 large files
1602 regular files
437 directories
0 character device files
0 block device files
0 fifos
0 links
93 symbolic links (92 fast symbolic links)
6 sockets
--------
2138 files
No errors this time, Any suggestion for a ROM that works OK on the M7_U ?
EDIT:
I Soff ed with revone and now trying this guide :
http://forum.xda-developers.com/showthread.php?t=2489914
will post soon
Here's the output of my getvar
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.707.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0714000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 3850mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I cannot S-OFF it since I'm not on stock rom. Even if I try to it fails since the phone reboots every 2 minutes. I'm currently downloading Guru_Reset_M7_2.24.707.1.zip. And additional information, my HBOOT got upgraded from 1.44.
So my question is, will I be able to reset the RUU on this one using the file I'm still downloading? it matches the version of my getvar.
Any help is appreciated.
Thank you
bright light
try holding it under a bright light while its restarting and see if that works.
otherwise re flash your rom and make sure you do a factory reset first
pbarakhsan said:
try holding it under a bright light while its restarting and see if that works.
otherwise re flash your rom and make sure you do a factory reset first
Click to expand...
Click to collapse
That didn't help. I dont have signal, I dont have lockscreen, I can't do anything past the booting of the phone. Any ideas?
recovery mode?
can you get to the recovery mode?
pbarakhsan said:
can you get to the recovery mode?
Click to expand...
Click to collapse
Yes I can. What can I do here? I'm on S-ON. and I dont think RUU would help.
b3rx said:
Yes I can. What can I do here? I'm on S-ON. and I dont think RUU would help.
Click to expand...
Click to collapse
how long is your phone stable in recovery, more than 2 minutes? no random restarts?
nkk71 said:
how long is your phone stable in recovery, more than 2 minutes? no random restarts?
Click to expand...
Click to collapse
It never restarts whenever I'm in bootloader or recovery.. So whatever I can do with recovery I can do it.
b3rx said:
It never restarts whenever I'm in bootloader or recovery.. So whatever I can do with recovery I can do it.
Click to expand...
Click to collapse
hmm, pretty late for me, but if recovery is ok, would you mind running the following shell:
adb shell
~ # umount /data
~ # e2fsck -n -v -f /dev/block/mmcblk0p37
Code:
~ # e2fsck -n -v -f /dev/block/mmcblk0p37
e2fsck -n -v -f /dev/block/mmcblk0p37
e2fsck 1.41.14 (22-Dec-2010)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
39356 inodes used (2.31%)
350 non-contiguous files (0.9%)
31 non-contiguous directories (0.1%)
# of inodes with ind/dind/tind blocks: 0/0/0
Extent depth histogram: 38933/54
4696398 blocks used (68.91%)
0 bad blocks
1 large file
36560 regular files
2426 directories
0 character device files
0 block device files
0 fifos
0 links
357 symbolic links (357 fast symbolic links)
4 sockets
--------
39347 files
~ #
nkk71 said:
hmm, pretty late for me, but if recovery is ok, would you mind running the following shell:
adb shell
~ # umount /data
~ # e2fsck -n -v -f /dev/block/mmcblk0p37
Code:
~ # e2fsck -n -v -f /dev/block/mmcblk0p37
e2fsck -n -v -f /dev/block/mmcblk0p37
e2fsck 1.41.14 (22-Dec-2010)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
39356 inodes used (2.31%)
350 non-contiguous files (0.9%)
31 non-contiguous directories (0.1%)
# of inodes with ind/dind/tind blocks: 0/0/0
Extent depth histogram: 38933/54
4696398 blocks used (68.91%)
0 bad blocks
1 large file
36560 regular files
2426 directories
0 character device files
0 block device files
0 fifos
0 links
357 symbolic links (357 fast symbolic links)
4 sockets
--------
39347 files
~ #
Click to expand...
Click to collapse
Here's my output
Code:
~ # e2fsck -n -v -f /dev/block/mmcblk0p37
e2fsck 1.41.14 (22-Dec-2010)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
979 inodes used (0.06%)
59 non-contiguous files (6.0%)
1 non-contiguous directory (0.1%)
# of inodes with ind/dind/tind blocks: 0/0/0
Extent depth histogram: 684
158589 blocks used (2.33%)
0 bad blocks
1 large file
190 regular files
493 directories
0 character device files
0 block device files
0 fifos
0 links
281 symbolic links (281 fast symbolic links)
6 sockets
--------
970 files
b3rx said:
Here's my output
Code:
~ # e2fsck -n -v -f /dev/block/mmcblk0p37
e2fsck 1.41.14 (22-Dec-2010)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
979 inodes used (0.06%)
59 non-contiguous files (6.0%)
1 non-contiguous directory (0.1%)
# of inodes with ind/dind/tind blocks: 0/0/0
Extent depth histogram: 684
158589 blocks used (2.33%)
0 bad blocks
1 large file
190 regular files
493 directories
0 character device files
0 block device files
0 fifos
0 links
281 symbolic links (281 fast symbolic links)
6 sockets
--------
970 files
Click to expand...
Click to collapse
looks good enough, go ahead with Guru Reset, (ROOTed), and get S-Off using rumrunner (IMHO)
nkk71 said:
looks good enough, go ahead with Guru Reset, (ROOTed), and get S-Off using rumrunner (IMHO)
Click to expand...
Click to collapse
I went for Guru Reset. but then again still the same. it boots, I get the time and battery life indication, but I can't go to notification settings, no signal, no icons, no home screen, and after a minute or two, it reboots. same cycle.
I can go to RUU mode, but I can't find any RUU zip or exe for my 2.24.707.1.
tried aosp yet?
b3rx said:
I can go to RUU mode, but I can't find any RUU zip or exe for my 2.24.707.1.
Click to expand...
Click to collapse
that is weird. try flashing an aosp rom to see if it works there
pbarakhsan said:
that is weird. try flashing an aosp rom to see if it works there
Click to expand...
Click to collapse
I've almost tried any rom there is for HTC One. and the result is the same, it doesnt have GSM signal, can't do much on it really. I think RUU is the way, but I can't since I'm not on S-OFF. Is there an RUU.exe for 2.24.707.1?
try this
b3rx said:
I've almost tried any rom there is for HTC One. and the result is the same, it doesnt have GSM signal, can't do much on it really. I think RUU is the way, but I can't since I'm not on S-OFF. Is there an RUU.exe for 2.24.707.1?
Click to expand...
Click to collapse
try his rom and tell me what happens
http://forum.xda-developers.com/showthread.php?t=2383508
pbarakhsan said:
try his rom and tell me what happens
http://forum.xda-developers.com/showthread.php?t=2383508
Click to expand...
Click to collapse
I've tried that as well. same difference. same result. keeps on rebooting after awhile.
b3rx said:
I've tried that as well. same difference. same result. keeps on rebooting after awhile.
Click to expand...
Click to collapse
im running out of ideas then
b3rx said:
I can go to RUU mode, but I can't find any RUU zip or exe for my 2.24.707.1.
Click to expand...
Click to collapse
b3rx said:
I've tried that as well. same difference. same result. keeps on rebooting after awhile.
Click to expand...
Click to collapse
hmmm, doesnt sound nice
too late for me to do this now, but I'll check in tomorrow and we'll take a closer look at your phones partitions.
nkk71 said:
hmmm, doesnt sound nice
too late for me to do this now, but I'll check in tomorrow and we'll take a closer look at your phones partitions.
Click to expand...
Click to collapse
Maybe this will not help you, but having the same problem as you, I used Adb push, to get a different rom (i installed hd revolution with android 4.3), then did soff as mentioned here earlier and now I installed hd revolution 5.1 and all works fine.
Thanks for the comments. Really helped me
nkk71 said:
hmmm, doesnt sound nice
too late for me to do this now, but I'll check in tomorrow and we'll take a closer look at your phones partitions.
Click to expand...
Click to collapse
I'm now ready for another set of debugging sessions. any other ideas?
Please help and thank you in advance.
I'll try to make this as easy to read as possible.
Device (originally)
- M7_UL
- MID: PN0714000
- CID: HTC__044
- HBOOT: 1.54
Main problem:
- Baseband & IMEI shows as "unknown". However, values are still available through fastboot getvar all.
Suspected cause:
- Official OTA
Tried mixture of nearly everything:
- HBOOT 1.44, 1.54, 1.55, 1.56
- RUU zip, RUU exe, custom ROMs
- Sense or Google Editions
- Bootloader locked, unlocked, relocked
- s-on, s-off (rumrunner)
Results:
- Some ROMs bootable and usable except for baseband unknown = no cell signal. WiFi ok. (especially Google Edition ROMs)
- Some ROMs just keeps restarting (especially Sense ROMs)
- Some ROMs reach the lock screen, but once unlock only shows white screen with big HTC logo. Then auto restarts. (especially Sense ROMs)
- Some ROMs stops restarting when back to s-on. But still baseband unknown.
Please advice:
Anyone have suggestions on how to fix this?
I read somewhere that this could be a problem with partitions.
But I couldn't find any more info on how to check/fix partition problem.
==========================================
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.22.3263.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.06.1540.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: <removed>
(bootloader) imei: <removed>
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0714000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3869mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bee46337
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.066s
sotplug said:
Please help and thank you in advance.
Click to expand...
Click to collapse
Nicely written up :good: (next time also include the getvar all output except IMEI and s/n; xxxx at least part of them out)
Have you tried a different radio, check here: http://forum.xda-developers.com/showthread.php?t=2419699
(flashable through custom recovery)
nkk71 said:
Nicely written up :good: (next time also include the getvar all output except IMEI and s/n; xxxx at least part of them out)
Have you tried a different radio, check here: http://forum.xda-developers.com/showthread.php?t=2419699
(flashable through custom recovery)
Click to expand...
Click to collapse
Will try the radios and report back (maybe tomorrow).
By the way, first post edited to add the fastboot getvar info.
Thank you.
nkk71 said:
Nicely written up :good: (next time also include the getvar all output except IMEI and s/n; xxxx at least part of them out)
Have you tried a different radio, check here: http://forum.xda-developers.com/showthread.php?t=2419699
(flashable through custom recovery)
Click to expand...
Click to collapse
sotplug said:
Will try the radios and report back (maybe tomorrow).
By the way, first post edited to add the fastboot getvar info.
Thank you.
Click to expand...
Click to collapse
Tried every radio in the post and baseband is still unknown.
sotplug said:
Tried every radio in the post and baseband is still unknown.
Click to expand...
Click to collapse
You Try flashing a RUU?
sotplug said:
Tried every radio in the post and baseband is still unknown.
Click to expand...
Click to collapse
Yup. Didn't work as well.
Sent from my HTC One using xda app-developers app
Hi nkk71. I followed your instructions from this post for checking partitions and this is the result.
GE firmware and ROM from this post.
Code:
[B]adb shell[/B]
[B]~ # mount[/B]
rootfs on / type rootfs (rw,seclabel)
tmpfs on /dev type tmpfs (rw,seclabel,nosuid,relatime,mode=755)
devpts on /dev/pts type devpts (rw,seclabel,relatime,mode=600)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,seclabel,relatime)
selinuxfs on /sys/fs/selinux type selinuxfs (rw,relatime)
/dev/block/mmcblk0p36 on /cache type ext4 (rw,seclabel,relatime,data=ordered)
/dev/block/mmcblk0p37 on /data type ext4 (rw,seclabel,relatime,data=ordered)
/dev/block/mmcblk0p37 on /sdcard type ext4 (rw,seclabel,relatime,data=ordered)
[B]~# umount /data[/B]
[B]~# e2fsck -n -v -f /dev/block/mmcblk0p37[/B]
e2fsck -n -v -f /dev/block/mmcblk0p37
e2fsck 1.41.14 (22-Dec-2010)
e2fsck: Device or resource busy while trying to open /dev/block/mmcblk0p37
Filesystem mounted or opened exclusively by another program?
[B]~# e2fsck -n -v -f /dev/block/mmcblk0p35[/B]
e2fsck -n -v -f /dev/block/mmcblk0p35
e2fsck 1.41.14 (22-Dec-2010)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
1893 inodes used (1.59%)
12 non-contiguous files (0.6%)
1 non-contiguous directory (0.1%)
# of inodes with ind/dind/tind blocks: 0/0/0
Extent depth histogram: 1602
202103 blocks used (42.54%)
0 bad blocks
0 large files
1537 regular files
64 directories
0 character device files
0 block device files
0 fifos
0 links
283 symbolic links (283 fast symbolic links)
0 sockets
--------
1884 files
Definitely not the expected result.
I think I'll try going back to as close as stock as possible (ROM and firmware) and run this check again.
sotplug said:
Hi nkk71. I followed your instructions from this post for checking partitions and this is the result.
GE firmware and ROM from this post.
Code:
[B]adb shell[/B]
[B]~ # mount[/B]
rootfs on / type rootfs (rw,seclabel)
tmpfs on /dev type tmpfs (rw,seclabel,nosuid,relatime,mode=755)
devpts on /dev/pts type devpts (rw,seclabel,relatime,mode=600)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,seclabel,relatime)
selinuxfs on /sys/fs/selinux type selinuxfs (rw,relatime)
[B][COLOR="Blue"]/dev/block/mmcblk0p36 on /cache type ext4 (rw,seclabel,relatime,data=ordered)
/dev/block/mmcblk0p37 on /data type ext4 (rw,seclabel,relatime,data=ordered)
/dev/block/mmcblk0p37 on /sdcard type ext4 (rw,seclabel,relatime,data=ordered)
[/COLOR][/B]
[B]~# umount /data[/B]
[B]~# e2fsck -n -v -f /dev/block/mmcblk0p37[/B]
e2fsck -n -v -f /dev/block/mmcblk0p37
e2fsck 1.41.14 (22-Dec-2010)
e2fsck: Device or resource busy while trying to open /dev/block/mmcblk0p37
Filesystem mounted or opened exclusively by another program?
[B]~# e2fsck -n -v -f /dev/block/mmcblk0p35[/B]
e2fsck -n -v -f /dev/block/mmcblk0p35
e2fsck 1.41.14 (22-Dec-2010)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
1893 inodes used (1.59%)
12 non-contiguous files (0.6%)
1 non-contiguous directory (0.1%)
# of inodes with ind/dind/tind blocks: 0/0/0
Extent depth histogram: 1602
202103 blocks used (42.54%)
0 bad blocks
0 large files
1537 regular files
64 directories
0 character device files
0 block device files
0 fifos
0 links
283 symbolic links (283 fast symbolic links)
0 sockets
--------
1884 files
Definitely not the expected result.
I think I'll try going back to as close as stock as possible (ROM and firmware) and run this check again.
Click to expand...
Click to collapse
I don't think it's a partition issue, but you've only checked /system you can still check /data, but you need to umount it first:
~# umount /data
~# umount /sdcard
then you can run ~# e2fsck -n -v -f /dev/block/mmcblk0p37
nkk71 said:
I don't think it's a partition issue, but you've only checked /system you can still check /data, but you need to umount it first:
~# umount /data
~# umount /sdcard
then you can run ~# e2fsck -n -v -f /dev/block/mmcblk0p37
Click to expand...
Click to collapse
I see. Need to unmount sdcard as well.
Now it does give some output without error:
Code:
[B]adb shell[/B]
[B]umount /data[/B]
[B]umount /sdcard[/B]
[B]e2fsck -n -v -f /dev/block/mmcblk0p37[/B]
e2fsck 1.41.14 (22-Dec-2010)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
5279 inodes used (0.31%)
245 non-contiguous files (4.6%)
4 non-contiguous directories (0.1%)
# of inodes with ind/dind/tind blocks: 0/0/0
Extent depth histogram: 5118/15
1118049 blocks used (16.40%)
0 bad blocks
1 large file
4398 regular files
734 directories
0 character device files
0 block device files
0 fifos
0 links
132 symbolic links (132 fast symbolic links)
6 sockets
--------
5270 files
If it isn't partition, then I'm really lost.
And there do seems to be quite a few users with similar issues (constant auto reboot).
By the way, for my case, Google roms seems to be better. Sense roms all auto reboot.
sotplug said:
I see. Need to unmount sdcard as well.
Now it does give some output without error:
If it isn't partition, then I'm really lost.
And there do seems to be quite a few users with similar issues (constant auto reboot).
Click to expand...
Click to collapse
so even after a RUU, (no updates) it still doesn't hold? which RUU are you using, link please
nkk71 said:
so even after a RUU, (no updates) it still doesn't hold? which RUU are you using, link please
Click to expand...
Click to collapse
Got my RUU from here:
ruu_m7_ul_jb_50_htc_asia_wwe_1-29-707-3_r_radio_4a-14-3250-13_10-33-1150-01_release_311678_signed-exe/
After lock screen, no Sense UI.
Just white HTC logo screen.
Then auto restarts every 1-2 mins.
Then using stock recovery, apply OTA:
ota_m7_ul_jb_50_htc_asia_wwe_1-29-707-16_r-1-29-707-3_r_release_318610_signedkaytj0xrerk0cnd9-zip/
Same result.
Not easy to find a x.xx.707.x RUU.
However, this is a hboot 1.44 RUU.
My phone started out originally as hboot 1.54.
Could this be a problem?
===== Update =====
adb shell
mount
rootfs on / type rootfs (rw,seclabel)
tmpfs on /dev type tmpfs (rw,seclabel,nosuid,relatime,mode=755)
devpts on /dev/pts type devpts (rw,seclabel,relatime,mode=600)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,seclabel,relatime)
selinuxfs on /sys/fs/selinux type selinuxfs (rw,relatime)
/dev/block/mmcblk0p36 on /cache type ext4 (rw,seclabel,relatime,data=ordered)
/dev/block/mmcblk0p37 on /data type ext4 (rw,seclabel,relatime,data=ordered)
/dev/block/mmcblk0p37 on /sdcard type ext4 (rw,seclabel,relatime,data=ordered)
umount /data
umount /sdcard
e2fsck -n -v -f /dev/block/mmcblk0p37
e2fsck 1.41.14 (22-Dec-2010)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
644 inodes used (0.04%)
4 non-contiguous files (0.6%)
1 non-contiguous directory (0.2%)
# of inodes with ind/dind/tind blocks: 0/0/0
Extent depth histogram: 634
151815 blocks used (2.23%)
0 bad blocks
1 large file
40 regular files
593 directories
0 character device files
0 block device files
0 fifos
0 links
1 symbolic link (1 fast symbolic link)
1 socket
--------
635 files
e2fsck -n -v -f /dev/block/mmcblk0p35
e2fsck 1.41.14 (22-Dec-2010)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
/lost+found not found. Create? no
Pass 4: Checking reference counts
Pass 5: Checking group summary information
/dev/block/mmcblk0p35: ********** WARNING: Filesystem still has errors **********
2367 inodes used (2.06%)
4 non-contiguous files (0.2%)
0 non-contiguous directories (0.0%)
# of inodes with ind/dind/tind blocks: 0/0/0
Extent depth histogram: 2298
370293 blocks used (80.72%)
0 bad blocks
0 large files
2213 regular files
85 directories
0 character device files
0 block device files
0 fifos
0 links
60 symbolic links (60 fast symbolic links)
0 sockets
--------
2358 files
sotplug said:
Pass 3: Checking directory connectivity
/lost+found not found. Create? no
/dev/block/mmcblk0p35: ********** WARNING: Filesystem still has errors **********
Click to expand...
Click to collapse
Minor error, once the ROM boots up it should recreate lost&found when needed.
sotplug said:
Not easy to find a x.xx.707.x RUU.
However, this is a hboot 1.44 RUU.
My phone started out originally as hboot 1.54.
Could this be a problem?
Click to expand...
Click to collapse
No, shouldnt be a problem.
sotplug said:
Got my RUU from here:
ruu_m7_ul_jb_50_htc_asia_wwe_1-29-707-3_r_radio_4a-14-3250-13_10-33-1150-01_release_311678_signed-exe/
After lock screen, no Sense UI.
Just white HTC logo screen.
Then auto restarts every 1-2 mins.
Click to expand...
Click to collapse
starting to sound like a hardware issue.
1- try removing the SIM card
2- set CID back to original
3- run the RUU (you may need to downgrade hboot separately first)
once the RUU is successfully applied, go to bootloader and check "fastboot getvar all", that baseband and firmware versions are correct.
nkk71 said:
Minor error, once the ROM boots up it should recreate lost&found when needed.
Click to expand...
Click to collapse
I did let it boot/auto-reboot a few times until the HTC lock screen.
So it seems that the boots are incomplete.
nkk71 said:
starting to sound like a hardware issue.
1- try removing the SIM card
2- set CID back to original
3- run the RUU (you may need to downgrade hboot separately first)
once the RUU is successfully applied, go to bootloader and check "fastboot getvar all", that baseband and firmware versions are correct.
Click to expand...
Click to collapse
Actually, this is exactly what I did.
I even used stock hboot and recovery from the RUU (decrypted using ruuveal)
Anyway, will try a few times again with different RUUs.
If still unsuccessful, maybe I should just bring back for warranty service.
And thanks a lot for trying to help. Really appreciate it.
sotplug said:
I did let it boot/auto-reboot a few times until the HTC lock screen.
So it seems that the boots are incomplete.
Actually, this is exactly what I did.
I even used stock hboot and recovery from the RUU (decrypted using ruuveal)
Anyway, will try a few times again with different RUUs.
If still unsuccessful, maybe I should just bring back for warranty service.
And thanks a lot for trying to help. Really appreciate it.
Click to expand...
Click to collapse
no problem, probably best to take it to service, we could try formatting the partitions (only data and system, not the raw ones), but i wouldnt hold my breath that it would help.
Running into the same problems
I have the same problems. I was about to try S-Off and RUU, but I just read here that it doesn't seem to work.
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.401.16
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: <removed>
(bootloader) imei: <removed>
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 4276mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) gencheckpt: 0
As you see, I'm still on HBOOT 1.44. I never installed another one.
(it started with random auto-reboots, they got more frequent and regular, so I re-flashed different roms and restored a backup with TWRP. The baseband started to be unknown in every rom after the restore or after flashing CM)
Did you find a solution or send it to service ? Successfully ?
What should I do ? Do I have any chance with RUU and going back to stock ?
Or should I just send it to service and hope ?
Thanks !
i have the same problem , any idea ?!
please help us
anyone , help us , heeeelp
Has anyone made progress on this issue? I have been unable to find a solution.
Same issue here..
I tried sky-fall ROM recently and it keep the device without restarting few days..
Is this hardware issue?
Same issue here..
I tried few roms , all fails..
After trying few radios it works..
But again i lost it..
Here some points i notices.
when phone is cold flashing radio is work..
Flashing radio with philz recovery only works ( TWRP didnt work )
I got a full nandroid backup via TWRP when everything works. But when i restore it , it did not work,
any suggestions...
My AT&T HTC One (32 GB) that I bought day one keeps rebooting randomly.
From day one, I rooted, unlocked my bootloader, flashed CWM, and installed Android Revolution.
I've since updated up to AR 31.0 without any problem, and have been running that version for quite a few months.
I have never had any problems with Mike's roms on any of my other phones.
Recently, it reboots completely, even when I'm not touching it.
Once booted up, it will revert to a previous state. The same apps will begin to update, I will be notified of the same emails, voicemails, texts, etc.
If I touch it while all this happens, it will reboot again, and do all of the same things.
If I leave it alone until all of this occurs, I might have some luck using the phone in a stable state.
I've not installed anything new recently.
I run Seeder, a few Xposed tweaks, a couple of Sense Toolbox tweaks, and Tasker at root level, but all of these things have been running simultaneously without a problem for months.
This just started happening out of no where.
Again, running AR 31.0, Android 4.3, Sense 5.5. Random reboots.
Any ideas guys?
does this happens on any other ROM?
kamilmirza said:
does this happens on any other ROM?
Click to expand...
Click to collapse
Nope. Never had this happen before. I just wonder how something could have changed without me doing anything.
try any other ROM and see
kamilmirza said:
try any other ROM and see
Click to expand...
Click to collapse
Been trying to.
I've tried to flash the rom cleanly, but it reaches 30% and reboots every time.
I'd flash another rom, but I'm running CWM, and all I seem to find is new roms that require TWRP.
When trying to install TWRP recovery, the phone still boots into CWM.
I have no idea what to do.
fromtheaudible said:
Been trying to.
I've tried to flash the rom cleanly, but it reaches 30% and reboots every time.
I'd flash another rom, but I'm running CWM, and all I seem to find is new roms that require TWRP.
When trying to install TWRP recovery, the phone still boots into CWM.
I have no idea what to do.
Click to expand...
Click to collapse
download TWRP from here
then place it in your adb folder
Boot into HBOOT then Fastboot
From fastboot. Use command "fastboot erase cache"
From fastboot. Use command "fastboot flash recovery recovery_file.img"
Click to expand...
Click to collapse
then reboot your phone into recovery and try any other ROM
---------- Post added at 12:07 AM ---------- Previous post was at 12:04 AM ----------
before all that paste the "fastboot getvar all" (without S/N and IMEI removed) from the bootloader
Tried exactly that twice before you posted it, but still no luck.
Boots into CWM, won't allow full flashes, and still reboots randomly.
Here's the info though:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4237mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
ERROR: usb_read failed with status e00002e8
getvar:all FAILED (status read failed (No such file or directory))
finished. total time: 0.042s
I found the usb read status to be interesting. Maybe that's the issue.
Any idea how to fix that if that's the problem?
have you tried the latest CWM?
kamilmirza said:
have you tried the latest CWM?
Click to expand...
Click to collapse
I'm on CWM 6.0.3.1.
Just tried to flash two different versions of TWRP, and CWM, standard and touch.
None of them stuck when I tried to enter recovery from the bootloader, even though fastboot gave me successful flashes.
Had something similar happen on a nexus ages ago. Internal SD died..
we need a professional here
let's call @nkk71 :fingers-crossed:
kamilmirza said:
we need a professional here
let's call @nkk71 :fingers-crossed:
Click to expand...
Click to collapse
Didn't read much, but
1- CWM 6.0.3.1... r u kidding?
2- 31.0 was released (at first) with w/p kernel, so changes wont stick,
Use 31.6 instead
3- 'random reboots' -> how's your power button?
Go to bootloader, any reboots ->
no -> go to custom recovery -> any reboots?
If yes to any of above, then ur power button is stuck.
Good night...
Sent from my HTC One using Tapatalk
fromtheaudible said:
Tried exactly that twice before you posted it, but still no luck.
Boots into CWM, won't allow full flashes, and still reboots randomly.
Here's the info though:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m7_ul
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
ERROR: usb_read failed with status e00002e8
getvar:all FAILED (status read failed (No such file or directory))
finished. total time: 0.042s
I found the usb read status to be interesting. Maybe that's the issue.
Any idea how to fix that if that's the problem?
Click to expand...
Click to collapse
My AT&T HTC One (32 GB) that I bought day one keeps rebooting randomly.
Click to expand...
Click to collapse
okay, just reread, so a couple of questions:
1- So you had this problem from day 1? and didnt think of exchanging it?
2- what OS you running (Win7, mac, etc)
Code:
(bootloader) version-main:
3- what did you try to flash (any firmware)??
Code:
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
4- have you tried restoring to stock using RUU_1.26.502.12_PN0712000_CWS__001_4A.14.3250.13
5- The random reboots, could indicate a hardware problem and/or corrupted partition(s), you could check those by opening a shell while in custom recovery (CWM or TWRP), and check the output:
Code:
C:\...> [B]adb devices[/B]
List of devices attached
H*********** recovery <- yep it's in recovery
C:\...> [B]adb shell
umount /system
umount /data
umount /sdcard
umount /cache[/B]
[B]e2fsck -n -v -f /dev/block/mmcblk0p35[/B] <- this checks /system
[B]e2fsck -n -v -f /dev/block/mmcblk0p36[/B] <- this checks /cache
[B]e2fsck -n -v -f /dev/block/mmcblk0p37[/B] <- this checks /data
if there are no major errors then output will look something like this:
[HIDE]~ # e2fsck -n -v -f /dev/block/mmcblk0p37
e2fsck -n -v -f /dev/block/mmcblk0p37
e2fsck 1.41.14 (22-Dec-2010)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
39356 inodes used (2.31%)
350 non-contiguous files (0.9%)
31 non-contiguous directories (0.1%)
# of inodes with ind/dind/tind blocks: 0/0/0
Extent depth histogram: 38933/54
4696398 blocks used (68.91%)
0 bad blocks
1 large file
36560 regular files
2426 directories
0 character device files
0 block device files
0 fifos
0 links
357 symbolic links (357 fast symbolic links)
4 sockets
--------
39347 files[/HIDE]
if there [B]are [/B]major error, then output will look something like this:
[HIDE]~# e2fsck -v -f /dev/block/mmcblk0p37
e2fsck -v -f /dev/block/mmcblk0p37
e2fsck 1.41.11 (14-Mar-2010)
e2fsck: Superblock invalid, trying backup blocks...
e2fsck: Bad magic number in super-block while trying to open /dev/block/mmcblk0p37
The superblock could not be read or does not describe a correct ext2
filesystem. If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>[/HIDE]
In response to your post:
1. Haven't had the problem from day one. This just started occurring. I've had the device since day 1.
2. I run Windows 7, and Mac OSX 10.9 on separate computers. I've got options.
3. I have tried running the RUU you linked. No dice. Image versions don't match up and won't allow me to push the stock rom. I've tried another that had a closer image version, and also tried a world wide edition. No luck.
My image version is 3.62.401.1
4. Here is my adb shell log:
Code:
localhost:~ ****$ adb devices
List of devices attached
HT34GW905119 recovery
localhost:~ ****$ adb shell
~ # umount /system
umount: can't umount /system: Invalid argument
~ # umount /data
~ # umount /sdcard
umount: can't umount /sdcard: Invalid argument
~ # umount /cache
~ # e2fsck -n -v -f /dev/block/mmcblk0p35
e2fsck 1.41.14 (22-Dec-2010)
Pass 1: Checking inodes, blocks, and sizes
Deleted inode 31691 has zero dtime. Fix? no
Deleted inode 31907 has zero dtime. Fix? no
Deleted inode 31908 has zero dtime. Fix? no
Deleted inode 79295 has zero dtime. Fix? no
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
Block bitmap differences: -(133064--133066) -(148739--148743) -(154603--154607) -(341749--342089)
Fix? no
Free blocks count wrong for group #4 (1802, counted=1797).
Fix? no
Free blocks count wrong (125515, counted=125510).
Fix? no
Inode bitmap differences: -31691 -(31907--31908) -79295
Fix? no
Free inodes count wrong for group #4 (7691, counted=7690).
Fix? no
Free inodes count wrong (116323, counted=116322).
Fix? no
/dev/block/mmcblk0p35: ********** WARNING: Filesystem still has errors **********
2477 inodes used (2.09%)
21 non-contiguous files (0.8%)
2 non-contiguous directories (0.1%)
# of inodes with ind/dind/tind blocks: 0/0/0
Extent depth histogram: 2171
349620 blocks used (73.58%)
0 bad blocks
0 large files
2091 regular files
79 directories
0 character device files
0 block device files
0 fifos
0 links
295 symbolic links (295 fast symbolic links)
0 sockets
--------
2465 files
~ # e2fsck -n -v -f /dev/block/mmcblk0p36
e2fsck 1.41.14 (22-Dec-2010)
Warning: skipping journal recovery because doing a read-only filesystem check.
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
21 inodes used (0.05%)
1 non-contiguous file (4.8%)
0 non-contiguous directories (0.0%)
# of inodes with ind/dind/tind blocks: 0/0/0
Extent depth histogram: 13
5719 blocks used (3.49%)
0 bad blocks
0 large files
8 regular files
4 directories
0 character device files
0 block device files
0 fifos
0 links
0 symbolic links (0 fast symbolic links)
0 sockets
--------
12 files
~ # e2fsck -n -v -f /dev/block/mmcblk0p37
e2fsck 1.41.14 (22-Dec-2010)
Warning: skipping journal recovery because doing a read-only filesystem check.
Pass 1: Checking inodes, blocks, and sizes
Inodes that were part of a corrupted orphan linked list found. Fix? no
Inode 254019 was part of the orphaned inode list. IGNORED.
Inode 254153 was part of the orphaned inode list. IGNORED.
Deleted inode 255336 has zero dtime. Fix? no
Inode 255428 was part of the orphaned inode list. IGNORED.
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
Block bitmap differences: -1016475 -(2083011--2083012) -2178670 -2178844 -2180689 +2186831
Fix? no
Free blocks count wrong for group #58 (5718, counted=5716).
Fix? no
Free blocks count wrong for group #63 (21182, counted=21181).
Fix? no
Free blocks count wrong (2577130, counted=1786950).
Fix? no
Inode bitmap differences: -254019 -254153 -255336 -255428
Fix? no
Free inodes count wrong for group #30 (5628, counted=5618).
Fix? no
Free inodes count wrong for group #31 (5994, counted=5963).
Fix? no
Free inodes count wrong for group #116 (6273, counted=6272).
Fix? no
Free inodes count wrong for group #117 (6642, counted=6497).
Fix? no
Free inodes count wrong for group #160 (7948, counted=7947).
Fix? no
Free inodes count wrong (1679719, counted=1674260).
Fix? no
/dev/block/mmcblk0p37: ********** WARNING: Filesystem still has errors **********
24217 inodes used (1.42%)
1679 non-contiguous files (6.9%)
39 non-contiguous directories (0.2%)
# of inodes with ind/dind/tind blocks: 0/0/0
Extent depth histogram: 29119/223
4238614 blocks used (62.19%)
0 bad blocks
1 large file
27526 regular files
1815 directories
0 character device files
0 block device files
0 fifos
0 links
313 symbolic links (313 fast symbolic links)
9 sockets
--------
29663 files
Didn't see anything there that looked like a corrupt partition. But I haven't had success unmounting system or sdcard.
To respond to an earlier post, power button is fine. Bootloader and recovery never reboot. First thing I noticed.
Maybe too low voltage?
Or http://android-revolution-hd.blogspot.ch/2013/10/fix-data-htc-one.html ?
fromtheaudible said:
1. Haven't had the problem from day one. This just started occurring. I've had the device since day 1.
Click to expand...
Click to collapse
ah, ok my bad, i misunderstood.
2. I run Windows 7, and Mac OSX 10.9 on separate computers. I've got options.
Click to expand...
Click to collapse
Windows 7 should do nicely.
3. I have tried running the RUU you linked. No dice. Image versions don't match up and won't allow me to push the stock rom. I've tried another that had a closer image version, and also tried a world wide edition. No luck.
My image version is 3.62.401.1
Click to expand...
Click to collapse
I think above refers to your ROM, cause your "(bootloader) version-main: " (ie firwmare) is blank, and since you're on hboot 1.44 + radio 4A.14.3250.13 should equal the RUU I posted earlier.
but nevermind for now
Didn't see anything there that looked like a corrupt partition. But I haven't had success unmounting system or sdcard.
Click to expand...
Click to collapse
it won't unmount if it's already umounted, so that was not really an error
/dev/block/mmcblk0p35: ********** WARNING: Filesystem still has errors **********
/dev/block/mmcblk0p37: ********** WARNING: Filesystem still has errors **********
Click to expand...
Click to collapse
and there we go , the plot thickens, both /system and /data have some corruptions, not completely unmountable but also not completely clean, which would be a good reason you're experiencing problems.
the one thing i'm concerned about it that the problem is with both /system and /data, which may indicate a hardware fault.
we can go ahead and perform a "real" format (as opposed to wipe) of these partitions, if the formatting sticks (ie without filesystem errors coming up again), then it could just be a software issue.
Let me know if you want to proceed? (if you are going to format /system and /data), you need to be comfy with adb shell, adb push and/or adb sideload)
PS: I may need to offline in about 20mins, and could be back in a few (probably like 3+) hours or so
nkk71 said:
ah, ok my bad, i misunderstood.
Windows 7 should do nicely.
I think above refers to your ROM, cause your "(bootloader) version-main: " (ie firwmare) is blank, and since you're on hboot 1.44 + radio 4A.14.3250.13 should equal the RUU I posted earlier.
but nevermind for now
it won't unmount if it's already umounted, so that was not really an error
and there we go , the plot thickens, both /system and /data have some corruptions, not completely unmountable but also not completely clean, which would be a good reason you're experiencing problems.
the one thing i'm concerned about it that the problem is with both /system and /data, which may indicate a hardware fault.
we can go ahead and perform a "real" format (as opposed to wipe) of these partitions, if the formatting sticks (ie without filesystem errors coming up again), then it could just be a software issue.
Let me know if you want to proceed? (if you are going to format /system and /data), you need to be comfy with adb shell, adb push and/or adb sideload)
PS: I may need to offline in about 20mins, and could be back in a few (probably like 3+) hours or so
Click to expand...
Click to collapse
That's what I gathered I'd have to do once LibertyMarine linked that forum post from Mike1986.
I'm all for it.
fromtheaudible said:
That's what I gathered I'd have to do once LibertyMarine linked that forum post from Mike1986.
I'm all for it.
Click to expand...
Click to collapse
i've done it with other users 3 or 4 times successfully, and 1 failure because of the filesystem errors kept coming back and back and back = hardware problem.
so have you read @mike1986. thread? you comfy with it?
here goes:
1- download this: http://goo.gl/pmZ9Mt and place it in your adb/fastboot folder
2- in recovery:
Code:
[B]adb push mkfs.ext4 /tmp/
adb shell
chmod 777 /tmp/mkfs.ext4
umount /data
umount /sdcard
umount /system
/tmp/mkfs.ext4 -b 4096 -O ^huge_file,^dir_nlink,^ext_attr,^resize_inode,^extra_isize -m 0 /dev/block/mmcblk0p35
/tmp/mkfs.ext4 -b 4096 -O ^huge_file,^dir_nlink,^ext_attr,^resize_inode,^extra_isize -m 0 /dev/block/mmcblk0p37
[/B]
you can see the expected output in mike's blog: http://android-revolution-hd.blogspot.com/2013/10/fix-data-htc-one.html
Code:
mke2fs 1.41.12 (17-May-2010)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
1703936 inodes, 6815744 blocks
0 blocks (0.00%) reserved for the super user
First data block=0
208 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768,98304,163840,229376,294912,819200,884736,1605632,2654208,4096000
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 25 mounts or 180 days, whichever comes first.
Use tune2fs -c or -i to override.
if that goes all well, continue in the shell:
Code:
[B]mount /data
mkdir -p /data/media/0
exit[/B]
then push your rom:
adb push rom.zip /data/media/0/ <- this will take 5 mins or so with no progress showing until finished
then install your rom in recovery, and hope for the best, stay away from 4.4 (KitKat) ROMs for now, because of recovery version (BTW: which one and version do you have?)
No working mirror for mkfs.ext4 file. :/
fromtheaudible said:
No working mirror for mkfs.ext4 file. :/
Click to expand...
Click to collapse
working here: http://www.androidrevolution.nl/downloader/download.php?file=mkfs.ext4
otherwise i'll upload it to my dropbox.