[Q] Unroot Process Questions - For Warranty - One (M7) Q&A, Help & Troubleshooting

Hi all, I have a few questions on returning to stock for warranty purposes, I want to send my phone back to fix the pink camera issue!
The details of my phone are below. I am using the recovery tool TWRP so the first question am I using the right ruu when I download M7 CWM Nandroid Backup CID HTC 039 2.24.980.2 ? I can't find a TWRP one for htc_039!
Second question I was following the instructions in the link http://htc-one.wonderhowto.com/how-...actory-settings-for-warranty-repairs-0149204/
All is fine until I get to Step 7 loading the ROM and returning to stock, the ruu above is a zip file and when I extract there is no .exe file to run so confused as to whether can just use instructions in the section "Restoring using a RUU.zip" in the link http://www.htc1guru.com/guides/return-stock-guide/ ?
Thanks for any help you can provide!
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.980.17
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0714000
(bootloader) cidnum: HTC__039
(bootloader) battery-status: good
(bootloader) battery-voltage: 3831mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT

leesider said:
Hi all, I have a few questions on returning to stock for warranty purposes, I want to send my phone back to fix the pink camera issue!
The details of my phone are below. I am using the recovery tool TWRP so the first question am I using the right ruu when I download M7 CWM Nandroid Backup CID HTC 039 2.24.980.2 ? I can't find a TWRP one for htc_039!
Second question I was following the instructions in the link http://htc-one.wonderhowto.com/how-...actory-settings-for-warranty-repairs-0149204/
All is fine until I get to Step 7 loading the ROM and returning to stock, the ruu above is a zip file and when I extract there is no .exe file to run so confused as to whether can just use instructions in the section "Restoring using a RUU.zip" in the link http://www.htc1guru.com/guides/return-stock-guide/ ?
Thanks for any help you can provide!
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.980.17
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: Remove this
(bootloader) imei: Remove this
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0714000
(bootloader) cidnum: HTC__039
(bootloader) battery-status: good
(bootloader) battery-voltage: 3831mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
Click to expand...
Click to collapse
Edit your post and remove you IMEI and serial number
you need these two files and TWRP 2.6.3.3 installed after the firmware update
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
Firmware 2.24 update.
https://www.dropbox.com/s/ed1ggts2nnzwvsr/firmware.zip
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip
fastboot reboot
This file flash the same as a rom with the option to install the stock recovery and radio
http://www.htc1guru.com/dld/guru_reset_m7_2-24-980-2-zip/

Thanks for that, I think it all makes sense!
Removed the IMEI and serial number as well........bit of a rooky mistake!

clsA said:
Edit your post and remove you IMEI and serial number
you need these two files and TWRP 2.6.3.3 installed after the firmware update
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
Firmware 2.24 update.
https://www.dropbox.com/s/ed1ggts2nnzwvsr/firmware.zip
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip
fastboot reboot
This file flash the same as a rom with the option to install the stock recovery and radio
http://www.htc1guru.com/dld/guru_reset_m7_2-24-980-2-zip/
Click to expand...
Click to collapse
Righteo got my phone to Locked with the Tampered notification gone, it is on S-ON, updated the firmware but now I have the problem when I try to flash both the recovery and the rom I get the error "FAILED (remote: 12 signature verify fail)
Not sure how I can get past this any ideas? Are should I try another stock ROM?
Thanks in advance

leesider said:
Righteo got my phone to Locked with the Tampered notification gone, it is on S-ON, updated the firmware but now I have the problem when I try to flash both the recovery and the rom I get the error "FAILED (remote: 12 signature verify fail)
Not sure how I can get past this any ideas? Are should I try another stock ROM?
Thanks in advance
Click to expand...
Click to collapse
you have to unlock the bootloader to flash the recovery and rom

clsA said:
Edit your post and remove you IMEI and serial number
you need these two files and TWRP 2.6.3.3 installed after the firmware update
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
Firmware 2.24 update.
https://www.dropbox.com/s/ed1ggts2nnzwvsr/firmware.zip
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip
fastboot reboot
This file flash the same as a rom with the option to install the stock recovery and radio
http://www.htc1guru.com/dld/guru_reset_m7_2-24-980-2-zip/
Click to expand...
Click to collapse
clsA said:
you have to unlock the bootloader to flash the recovery and rom
Click to expand...
Click to collapse
Delete thanks for all your help

Related

I broke it, can you fix it?

I've flashed multiple ROMS but I don't know what what's up now.
I was stuck on FTS Rom and couldn't flash any other ROMS- they wouldn't take. It would always reboot in FTS.
So in TWRP, I did an advanced wipe... everything was gone including the multiple various ROMS and backups in both TWRP and CLKmod. Trouble is, now I can get as far as flashing various new recoveries from the bootloader, but I can't push any rom to it or flash anything from the bootloader.
Extra kicker- I can NOT mount the phone on my computer. This has been the case for a while, not from any ROM. Not from FTS Rom, not from any recovery... can not mount the phone and transfer files.
HTC Dumlock also did not work.
Specs-
HTC One- unlocked, rooted, HBoot 1.55, S-On, Radio 4%.20.3218.13
Any help would be appreciated.
I did s-off since you're unlocked. Probably the issue. Then I would go into fast boot to either ruu or transfer a rom
I think rumrunner is what works on 1.55 hboot
Sent from my HTC One
krankenator said:
I've flashed multiple ROMS but I don't know what what's up now.
I was stuck on FTS Rom and couldn't flash any other ROMS- they wouldn't take. It would always reboot in FTS.
So in TWRP, I did an advanced wipe... everything was gone including the multiple various ROMS and backups in both TWRP and CLKmod. Trouble is, now I can get as far as flashing various new recoveries from the bootloader, but I can't push any rom to it or flash anything from the bootloader.
Extra kicker- I can NOT mount the phone on my computer. This has been the case for a while, not from any ROM. Not from FTS Rom, not from any recovery... can not mount the phone and transfer files.
HTC Dumlock also did not work.
Specs-
HTC One- unlocked, rooted, HBoot 1.55, S-On, Radio 4%.20.3218.13
Any help would be appreciated.
Click to expand...
Click to collapse
do you know how to use fastboot commands?
post your results from (minus your iemi and serial no)
fastboot getvar all
we can use this info to direct you to the correct RUU to fix your phone
clsA said:
do you know how to use fastboot commands?
post your results from (minus your iemi and serial no)
fastboot getvar all
we can use this info to direct you to the correct RUU to fix your phone
Click to expand...
Click to collapse
Not pro, but I hobble by. Results:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4T.20.3218.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4350mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-2da61e5e88
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
krankenator said:
Not pro, but I hobble by. Results:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4T.20.3218.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4350mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-2da61e5e88
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Click to expand...
Click to collapse
Edit your post to match mine.
you have AT&T phone here's the link to the RUU
http://www.htc1guru.com/dld/ruu_m7_...3_10-38j-1157-04_release_334235_signed_2-exe/
Edit: Keep in mind that resetting your phone with RUU is full wipe and starting from scratch
after it's done you will need to unlock bootloader, flash recovery and Root. Same as if your phone was brand new
clsA said:
Edit your post to match mine.
you have AT&T phone here's the link to the RUU
http://www.htc1guru.com/dld/ruu_m7_...3_10-38j-1157-04_release_334235_signed_2-exe/
Edit: Keep in mind that resetting your phone with RUU is full wipe and starting from scratch
after it's done you will need to unlock bootloader, flash recovery and Root. Same as if your phone was brand new
Click to expand...
Click to collapse
Thanks. I don't suppose there is a Mac version for this? I don't currently have Windows installed. If not, I"ll just have to fix this later.
Thanks for all your help.
krankenator said:
Thanks. I don't suppose there is a Mac version for this? I don't currently have Windows installed. If not, I"ll just have to fix this later.
Thanks for all your help.
Click to expand...
Click to collapse
yes here
http://www.htc1guru.com/dld/ruu-zip-m7_ul_jb43_sense50_mr_cingular_us_3-17-502-3-decrypted-zip/
-rom.zip can be flashed using
adb reboot-bootloader
fastboot oem rebootRUU
fastboot flash zip rom.zip
fastboot flash zip rom.zip (yes do this 2 times)
fastboot reboot
Click to expand...
Click to collapse
files needed >> http://forum.xda-developers.com/showthread.php?t=2390995
clsA said:
yes here
http://www.htc1guru.com/dld/ruu-zip-m7_ul_jb43_sense50_mr_cingular_us_3-17-502-3-decrypted-zip/
files needed >> http://forum.xda-developers.com/showthread.php?t=2390995
Click to expand...
Click to collapse
Thanks for your help. Downloading the RUU now but before I flash this I just want to be clear.
Do I first need to S-Off using Rumrunner? I can't find a mac version, just Linux and Win.
Then do I need to re-lock my bootloader? (I read that step here http://forum.xda-developers.com/showthread.php?t=2251800)
Then at that point I can flash the RUU or can I just flash the RUU without S-Off or re-locking the bootloader
-rom.zip can be flashed using
adb reboot-bootloader
fastboot oem rebootRUU
fastboot flash zip rom.zip
fastboot flash zip rom.zip (yes do this 2 times)
fastboot reboot
krankenator said:
Thanks for your help. Downloading the RUU now but before I flash this I just want to be clear.
Do I first need to S-Off using Rumrunner? I can't find a mac version, just Linux and Win.
Then do I need to re-lock my bootloader? (I read that step here http://forum.xda-developers.com/showthread.php?t=2251800)
Then at that point I can flash the RUU or can I just flash the RUU without S-Off or re-locking the bootloader
-rom.zip can be flashed using
adb reboot-bootloader
fastboot oem rebootRUU
fastboot flash zip rom.zip
fastboot flash zip rom.zip (yes do this 2 times)
fastboot reboot
Click to expand...
Click to collapse
I don't think that file requires s-off
but yes a locked boot loader is needed
fastboot oem lock
Well, time to try something else.
Any ideas anyone?
krankenator said:
Something didn't work. It only reboot to the bootloader.
Pro-Mac-Jesseesktop jesse$ ./fastboot oem lock
Click to expand...
Click to collapse
FAILED (remote: 12 signature verify fail)
I'll take a guess this means you need s-off
or a windows PC to run the RUU.exe I posted first

[Q] HELP - HTC One stuck on boot - cant get into recovery

Hi all
I have a HTC One (M7). Its has been rooted and was running 4.3. Tried to update to 4.4 and flashed an Android Revolution HD ROM. Not sure if it was the wrong ROM or if I wasn't S-OFF. Now i am stuck on HTC boot screen. When i try to load into recovery it flashes up for a second and then goes back to HTC boot image.
Have tried to flash a new recovery using EZtoolkit - Flashed TWRP - didnt help, still cant get in.
Also used the toolkit to erase the cache but hasnt helped.
Any suggestions??
Output of fastboot getvar all?
SaHiLzZ said:
Output of fastboot getvar all?
Click to expand...
Click to collapse
Sorry mate. Im not the best with this.
How do i find this?
SaHiLzZ said:
Output of fastboot getvar all?
Click to expand...
Click to collapse
C:\Users\Gary\Downloads\EZToolkit%20Advanced%20(M7-M7WLS)\EZToolkit Advanced (M7
-M7WLS)\EZToolkit Advanced (M7-M7WLS)\mBF>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH37LW903746
(bootloader) imei: 357864056977711
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4199mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.150s
Think this is what u mean
Garyflem said:
C:\Users\Gary\Downloads\EZToolkit%20Advanced%20(M7-M7WLS)\EZToolkit Advanced (M7
-M7WLS)\EZToolkit Advanced (M7-M7WLS)\mBF>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH37LW903746
(bootloader) imei: 357864056977711
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4199mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.150s
Think this is what u mean
Click to expand...
Click to collapse
Download: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/m7ul//philz_touch_6.08.9-m7ul.img
Connect your phone to USB.
Go to bootloader >> fastboot mode (fastboot USB) - [power + volume down].
Code:
fastboot flash recovery philz_touch_6.08.9-m7ul.img
Do not turn off USB in phone and turn off your phone.
You go to recovery?
Garyflem said:
C:\Users\Gary\Downloads\EZToolkit%20Advanced%20(M7-M7WLS)\EZToolkit Advanced (M7
-M7WLS)\EZToolkit Advanced (M7-M7WLS)\mBF>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH37LW903746
(bootloader) imei: 357864056977711
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4199mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.150s
Think this is what u mean
Click to expand...
Click to collapse
Yup..
Download this: http://www.androidruu.com/getdownlo..._P2_release_324936_signedma8j1sa3e2o09s35.zip
Unzip. Find the firmware.zip in the unzipped content, and flash it like this:
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot reboot
This *SHOULD* get your stock recovery back, you should be able to get back in STOCK recovery. Then, flash custom recovery, and you should be able to get back in TWRP recovery.
Then you will need to ADB push/ ADB Sideload a custom rom to your device, and get going. Stay with 4.3, until your device is booted and you have a chance to S-OFF.
Don't use toolkits.. Get used to using fastboot and adb.. Download fastboot and adb from here.. Read the guide. Once setup, from within the fastboot and adb folder, Shift*key and*right click*on the*folder. open Command window here..
Connect your phone to PC while in bootloader screen.
Make sure fastboot USB is shown on bootloader
Then type..
Fastboot devices. A seemingly random number should be shown.
If it is.. Type fastboot erase cache.
fastboot reboot
PS.. Make sure you are using TWRP 2.6.3.3.
http://techerrata.com/file/twrp2/m7/openrecovery-twrp-2.6.3.3-m7.img
Rename to recovery
fastboot flash recovery recovery.img
fastboot erase cache
fastboot reboot
Sent from my Nexus 7 using XDA Premium 4 mobile app
SaHiLzZ said:
Yup..
Unzip. Find the firmware.zip in the unzipped content, and flash it like this:
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot reboot
This *SHOULD* get your stock recovery back, you should be able to get back in STOCK recovery. Then, flash custom recovery, and you should be able to get back in TWRP recovery.
Then you will need to ADB push/ ADB Sideload a custom rom to your device, and get going. Stay with 4.3, until your device is booted and you have a chance to S-OFF.
Click to expand...
Click to collapse
Ok im downloading the ZIp file now. If flash that could i then flash a stock ROM and return fully to stock and get an OTA update to 4.4?
SaHiLzZ said:
Yup..
Unzip. Find the firmware.zip in the unzipped content, and flash it like this:
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot reboot
This *SHOULD* get your stock recovery back, you should be able to get back in STOCK recovery. Then, flash custom recovery, and you should be able to get back in TWRP recovery.
Then you will need to ADB push/ ADB Sideload a custom rom to your device, and get going. Stay with 4.3, until your device is booted and you have a chance to S-OFF.
Click to expand...
Click to collapse
You are a star mate. RUU flashed and then it loadeded up into TWRP straight away without me even flashing it again.
Just downlaoding a 4.3 ROM now
SaHiLzZ said:
Yup..
Download this: http://www.androidruu.com/getdownlo..._P2_release_324936_signedma8j1sa3e2o09s35.zip
Unzip. Find the firmware.zip in the unzipped content, and flash it like this:
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot reboot
This *SHOULD* get your stock recovery back, you should be able to get back in STOCK recovery. Then, flash custom recovery, and you should be able to get back in TWRP recovery.
Then you will need to ADB push/ ADB Sideload a custom rom to your device, and get going. Stay with 4.3, until your device is booted and you have a chance to S-OFF.
Click to expand...
Click to collapse
I was searching forum for my problem (quite similar to the problem of OP) i have tried all of the mentioned steps but i am unable to write any thing via bootloaders (i.e. recovery, zip, ruu etc) i have also tried to restore my phone via RUU...setup is shutdown the device but do not boot it up again (as it suppose to)... i m uploading the cmd screen shot for your kind perusal, kindly help me out as well please...
Thanks & best regards,
Mortal Eternity said:
I was searching forum for my problem (quite similar to the problem of OP) i have tried all of the mentioned steps but i am unable to write any thing via bootloaders (i.e. recovery, zip, ruu etc) i have also tried to restore my phone via RUU...setup is shutdown the device but do not boot it up again (as it suppose to)... i m uploading the cmd screen shot for your kind perusal, kindly help me out as well please...
Thanks & best regards,
Click to expand...
Click to collapse
The error says sd card failure
SaHiLzZ said:
The error says sd card failure
Click to expand...
Click to collapse
does it mean that it might be a hardware issue and nothing can be done further??
If you came even flash recovery, sounds like it
sent from my mobile device
SaHiLzZ said:
If you came even flash recovery, sounds like it
sent from my mobile device
Click to expand...
Click to collapse
yes i can not even flash recovery... whenever i attempt to do so it gives an error as attached!
seems like some sort of security has been activated but can be a hardware issue as well...

[Q] (Q) Cant flash recovery( stock and custom) and cant flash RUU too?

Hi everybody,
i have HTC one M7, and i getvar all that:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.12.707.105
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA38WW900067
(bootloader) imei: 356376053563510
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 4278mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.046s
1st of all i flash RUU RUU_M7_UL_JB_50_hTC_Asia_WWE_1.29.707.3_R_Radio_4A.14.3250.13_10.33.1150.01_release_311678_signed
when check signature, it failed
also i try to extract rom.zip to flash manually , failed too.( I do relock bootloader to flash RUU)
I flash stock recovery and custom, but when i flash TWRP and CWM then i enter recovey, the screen on HTC said Entering recovery but after that HTC reboot by itself. ( i do unlock bootloader to flash recovery)
Can anyone tell me what to do now?
Thank for your help.
Type fastboot erase cache after flashing custom recovery. Try entering recovery again
Also you can't flash lower version RUU because your device is s-on
Hi SaHiLzZ
I do fastboot erase cache, and it's okay, but i cant enter custom recovery, i try many version and many recovery, but it's not ok.
When i press Recovery, it still show Entering Recovery and restart device, any idea, please?
hoangchaunguyen said:
Hi SaHiLzZ
I do fastboot erase cache, and it's okay, but i cant enter custom recovery, i try many version and many recovery, but it's not ok.
When i press Recovery, it still show Entering Recovery and restart device, any idea, please?
Click to expand...
Click to collapse
same problem here
is anyone can help me and this guy please
My Post Here
same problem
we must wait for ruu exe file 5.12.707.105
Please dont use any zip file for uptae
When exe file of ruu release our problem will end
So please don't updates any zip file
raghav9 9 said:
we must wait for ruu exe file 5.12.707.105
Please dont use any zip file for uptae
When exe file of ruu release our problem will end
So please don't updates any zip file
Click to expand...
Click to collapse
What is the logic behind this number? Is it already planned or is it based on radio number?
I think this could also be a solution for my problem (just started a new thread)
s-on relocked
leoncornelissen said:
What is the logic behind this number? Is it already planned or is it based on radio number?
I think this could also be a solution for my problem (just started a new thread)
Click to expand...
Click to collapse
when locked, relocked, s-on
can't downgrade firmware
only equal or greater firmware can flash

Help returning to 4.4.2 stock from 4.2.2. Nothing works!

Hi guys,
For 5 weeks I've been trying to upgrade my phone to 5.0.2 and nothing works. All I've managed to do is go from 4.4.2 down to 4.2.2 and now I'm stuck here. I've tried RUUs, I've tried fastboot zips, everything fails.
Right now I've got 4.2.2 TWRP, and s-off and this from getvar:
bootloader: 1.54.0000
baseband: 4a.17.3250.14
main 2.24.206.7
cidnum: 11111111
I just want to go back to stock to get OTAs.
Can someone please help me? I've watched so many YouTube videos and read so many threads but nothing has worked. I just keep digging a deeper hole.
download the stock firmware for your phone and flash it with odin
anfalanl said:
download the stock firmware for your phone and flash it with odin
Click to expand...
Click to collapse
Odin? Isn't that for Samsung phones?
SJWackness said:
Hi guys,
For 5 weeks I've been trying to upgrade my phone to 5.0.2 and nothing works. All I've managed to do is go from 4.4.2 down to 4.2.2 and now I'm stuck here. I've tried RUUs, I've tried fastboot zips, everything fails.
Right now I've got 4.2.2 TWRP, and s-off and this from getvar:
bootloader: 1.54.0000
baseband: 4a.17.3250.14
main 2.24.206.7
cidnum: 11111111
I just want to go back to stock to get OTAs.
Can someone please help me? I've watched so many YouTube videos and read so many threads but nothing has worked. I just keep digging a deeper hole.
Click to expand...
Click to collapse
Post the output of "fastboot getvar all" (remove imei and serialno)
"everything fails": can you be more precise please? Sometime it will fail for a simple reason, but without knowing the exact error its hard to tell you why it failed...
---------- Post added at 06:15 PM ---------- Previous post was at 06:12 PM ----------
anfalanl said:
download the stock firmware for your phone and flash it with odin
Click to expand...
Click to collapse
Hummm, no
donkeykong1 said:
Odin? Isn't that for Samsung phones?
Click to expand...
Click to collapse
^^
This is output of getvar all:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.206.7
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: xxx
(bootloader) imei: xxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3849mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I'f tried using different RUUs (206s and 401s) to get to 4.4.2 but it always fails. The furthest I got was a RUU getting stuck at "Checking Headers ....5%". It sat there for 30 minutes a few different times.
I've tried installing an OTA zip for 5.0.2 (when I was on 4.4.2) through TWRP but that didn't work either.
So I got S-Off and tried all of these again. Still not working.
Ideally what I want is a clean Sense 6 install of 5.0.2 with the latest firmware.
Any help would be very much appreciated. Thanks in advance.
I'm also getting this error from a few RUUs:
An error (-5001 : 0x80070002) has occurred while running the setup.
I've rebooted and run the RUU again and it says the same.
SJWackness said:
This is output of getvar all:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.206.7
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: xxx
(bootloader) imei: xxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3849mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I'f tried using different RUUs (206s and 401s) to get to 4.4.2 but it always fails. The furthest I got was a RUU getting stuck at "Checking Headers ....5%". It sat there for 30 minutes a few different times.
I've tried installing an OTA zip for 5.0.2 (when I was on 4.4.2) through TWRP but that didn't work either.
So I got S-Off and tried all of these again. Still not working.
Ideally what I want is a clean Sense 6 install of 5.0.2 with the latest firmware.
Any help would be very much appreciated. Thanks in advance.
Click to expand...
Click to collapse
SJWackness said:
I'm also getting this error from a few RUUs:
An error (-5001 : 0x80070002) has occurred while running the setup.
I've rebooted and run the RUU again and it says the same.
Click to expand...
Click to collapse
update your firmware to 7.19.401.2 then flash the 7.19.401.22 ruu. You must use htc_fastboot.exe to flash the ruu <--- important. Save htc_fastboot.exe, the 7.19.401.2 firmware and the 7.19.401.22 ruu in the same folder you have adb.exe and fastboot.exe on your computer.
Code:
fastboot oem rebootRUU
fastboot flash zip M7_UL_Firmware_7.19.401.2.zip
fastboot flash zip M7_UL_Firmware_7.19.401.2.zip
fastboot reboot-bootloader
htc_fastboot oem rebootRUU
htc_fastboot flash zip PN07IMG_M7_UL_L50_SENSE60_MR_HTC_Europe_7.19.401.22_Radio_4T.35.3218.16_10.33Q.1718.01L_release_430964_signed.zip
htc_fastboot reboot
First boot can take longer than usual (stuck at HTC splash screen) just wait it will boot eventually.
alray said:
update your firmware to 7.19.401.2 then flash the 7.19.401.22 ruu. You must use htc_fastboot.exe to flash the ruu <--- important. Save htc_fastboot.exe, the 7.19.401.2 firmware and the 7.19.401.22 ruu in the same folder you have adb.exe and fastboot.exe on your computer.
Code:
fastboot oem rebootRUU
fastboot flash zip M7_UL_Firmware_7.19.401.2.zip
fastboot flash zip M7_UL_Firmware_7.19.401.2.zip
fastboot reboot-bootloader
htc_fastboot oem rebootRUU
htc_fastboot flash zip PN07IMG_M7_UL_L50_SENSE60_MR_HTC_Europe_7.19.401.22_Radio_4T.35.3218.16_10.33Q.1718.01L_release_430964_signed.zip
htc_fastboot reboot
First boot can take longer than usual (stuck at HTC splash screen) just wait it will boot eventually.
Click to expand...
Click to collapse
THANKS A MILLION! It looks like it's updated! Cheers!!

HTC One (M7) Stuck in ruu mode

Hello.. I have tried to upgrade my os using a RUU file.. The system version was 6.xx.xxx.
That was not matched to radio version or something.. I forgot to check that..
Now im stuck on RUU mode..
My previous OS version was 5.03.651.3
I was searched for that and i found a RUU that matches 5.03.651.3..I have installed it using RUU exe but ita says { Cir - Fail pu
}.
Every other things is ok
what should i do? Plz help me.. I cant get in to recovery or anything.
OS version is showing in Red color
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 1.01.20.0515
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.03.651.3
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA34MS902538
(bootloader) imei: 990001466195989
(bootloader) meid: 99000146619598
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4277mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.086s
MiyuB said:
Hello.. I have tried to upgrade my os using a RUU file.. The system version was 6.xx.xxx.
That was not matched to radio version or something.. I forgot to check that..
Now im stuck on RUU mode..
My previous OS version was 5.03.651.3
I was searched for that and i found a RUU that matches 5.03.651.3..I have installed it using RUU exe but ita says { Cir - Fail pu
}.
Every other things is ok
what should i do? Plz help me.. I cant get in to recovery or anything.
OS version is showing in Red color
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 1.01.20.0515
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.03.651.3
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA34MS902538
(bootloader) imei: 990001466195989
(bootloader) meid: 99000146619598
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4277mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.086s
Click to expand...
Click to collapse
"Cir fail pu" = Consumer infrared - partition update fail
Which basically mean that the RUU was unable to write the CIR.img to your CIR partition, for some reason...
Since your phone is S-OFF you can flash unsigned firmware so the best option would be to download the 5.03.651.3 firmware.zip, remove the CIR.img from it and flash it to your phone (it won't attempt to flash the CIR partition so it won't give you any fail).
Download this one: https://www.androidfilehost.com/?fid=23501681358553240 open it and remove the CIR.img. Then flash it to your phone:
Code:
fastboot oem rebootRUU
fastboot flash zip 5.03.651.3_firmware_RUU.zip
fastboot flash zip 5.03.651.3_firmware_RUU.zip
fastboot reboot
alray said:
"Cir fail pu" = Consumer infrared - partition update fail
Which basically mean that the RUU was unable to write the CIR.img to your CIR partition, for some reason...
Since your phone is S-OFF you can flash unsigned firmware so the best option would be to download the 5.03.651.3 firmware.zip, remove the CIR.img from it and flash it to your phone (it won't attempt to flash the CIR partition so it won't give you any fail).
Download this one: https://www.androidfilehost.com/?fid=23501681358553240 open it and remove the CIR.img. Then flash it to your phone:
Code:
fastboot oem rebootRUU
fastboot flash zip 5.03.651.3_firmware_RUU.zip
fastboot flash zip 5.03.651.3_firmware_RUU.zip
fastboot reboot
Click to expand...
Click to collapse
Ohhhhh you saved my ass.. Thanks buddy...
But os has a problem.. Black lines go though display..
I had a twrp backup.. To restore that backup i installed twrp recovery
but phone cant go to recovery.. It is stuck in the green htc logo display and after that phone restarts..
MiyuB said:
Ohhhhh you saved my ass.. Thanks buddy...
But os has a problem.. Black lines go though display..
I had a twrp backup.. To restore that backup i installed twrp recovery
but phone cant go to recovery.. It is stuck in the green htc logo display and after that phone restarts..
Click to expand...
Click to collapse
Did you erased the cache and restarted bootloader after flashing twrp? What version of twrp? Is that problem with the display only in the OS?
Code:
fastboot flash recovery twrp.img
fastboot erase cache
fastboot reboot-bootloader
alray said:
Did you erased the cache and restarted bootloader after flashing twrp? What version of twrp? Is that problem with the display only in the OS?
Code:
fastboot flash recovery twrp.img
fastboot erase cache
fastboot reboot-bootloader
Click to expand...
Click to collapse
I hav managed that.. I restored that TWRP backup..Now phone works like charm..Thanks alot buddy..You really saved me.
I need a one help.. Can u give me the right RUU for this phone?
MiyuB said:
I hav managed that.. I restored that TWRP backup..Now phone works like charm..Thanks alot buddy..You really saved me.
I need a one help.. Can u give me the right RUU for this phone?
Click to expand...
Click to collapse
6.23.651.10 is the latest version: https://www.androidfilehost.com/?fid=24588232905725176
But you'll probably get the same problem with your CIR partition when flashing that RUU.
You'll either have to do the same procedure (remove the CIR.img from the 6.23.651.10 firmware and flash it) or decrypt the RUU before flashing so you can remove the CIR.img.
alray said:
6.23.651.10 is the latest version: https://www.androidfilehost.com/?fid=24588232905725176
But you'll probably get the same problem with your CIR partition when flashing that RUU.
You'll either have to do the same procedure (remove the CIR.img from the 6.23.651.10 firmware and flash it) or decrypt the RUU before flashing so you can remove the CIR.img.
Click to expand...
Click to collapse
Ok i got it bro..Thank u veryy much

Categories

Resources