Hello !
<<< Custom Kernel For Huawei Ascend P7 >>>
About :
Code:
[CENTER]
* update kernel from linux 3.0.8 to linux 3.0.101 ;
* fast & stable release ;
* added [URL="http://source.android.com/devices/low-ram.html#ksm"]KSM[/URL] support and is enabled by default !
* this custom kernel have not set_immutable.list ( was removed from ramdisk ! ) ;
* init.d support enabled into ramdisk ;
* zipalign all apps into /data/app & /system/app on every boot ;
* tweaks database using sqlite3 ;
* should work on any Huawei Firmware EMUI 2.3 !
* tested only on P7-L10 , but should work also on other versions of the device ;
* this custom kernel was not tested on EMUI 3.0 Huawei Firmware !
[/CENTER]
Downloads :
Code:
[CENTER]
* [URL="https://www.androidfilehost.com/?fid=95857557620393348"]update_kernel_3.0.101.zip[/URL] [B]md5 :[/B] bda0dee9fe0d64ed3df12be59092287e
* [URL="https://www.androidfilehost.com/?fid=95864024717066481"]update_kernel_3.0.8.zip[/URL] [B]md5 :[/B] 3fac913be4314511ba0252aede6d4d28
[/CENTER]
Installation :
Code:
[CENTER]
* you should have already installed TWRP 2.8.1.0 ;
* set_immutable.list must be also "removed" ;
* copy update_kernel_3.0.101 archive in your device ( Internal or External Storage )
* go into TWRP and flash ...
* wipe not require ;
* enjoy !
[/CENTER]
Source :
Code:
[CENTER]
* [URL="https://github.com/surdupetru/hwp7_kernel"]GitHub[/URL] !
[/CENTER]
Screenshots :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
regards,
Surdu Petru
*** reserved ***
Surdu_Petru, Thank you for your work. :good: Only one issue, TWRP recovery does not work in EMUI 3.0, Can I install from CWM?
Thanks again.
regards.
* should work on any Huawei Firmware EMUI 2.3 !
I can confirm,it doesn't work on Emui 3.0 B.602.Phone rebooting in a circle.
Sent from my HUAWEI P7-L10 using Tapatalk
Dose this kernel supports overclocking?
luca3011 said:
Dose this kernel supports overclocking?
Click to expand...
Click to collapse
No, not overclocking yet ... !
Re-patches kernel to 3.0.8 - solved battery issue !
Hello !
Because of some changes to the kernel by updating to 3.0.101 - it seems that some patches affect battery life , I released today a new kernel based on kernel linux 3.0.8 - more battery friendly !
This new custom kernel is identically with the first kernel based 3.0.101 but this time was reverted to 3.0.8 - and there are no issue regarding battery life !
Thank you for understanding
hi surdu_petru,
you write that set_immutable.list has to be removed before flashing your kernel..
well,
i have rooted my device (P7-L10 on B602) now by using the custom cwm recovery (with the newest SU 2.40)..it works in parts (in some threads it is declared as 99% working) - this i can confirm..
it is not possible to install busybox for the terminal emulator to delete the set_immutable.list file..
it is also not possible to edit build.prop or change the filenames etc (the rights for the file explorer are set correctly and of course it has root rights by SU)..
so, how can i get rid of this file?
thanks for a reply..
so, how can i get rid of this file?
thanks for a reply..
Click to expand...
Click to collapse
Install custom B.602 for P7-L10 where is allready immutable.list removed and Busybox and SuperSu installed..(My rom,7even rom).
Sent from my HUAWEI P7-L10 using Tapatalk
EMUI 3.0
Any Thoughts on Making The Kernel Compatible With EMUI 3.0
Hi Surdu_petru
do you have any plan to add different governors to you kernel? It would be really good and usefull.
Thanks and happy new year.
v11lemans said:
Hi Surdu_petru
do you have any plan to add different governors to you kernel? It would be really good and usefull.
Thanks and happy new year.
Click to expand...
Click to collapse
Hello !
Yes, I'll try to add more stuff , but unfortunately at this time my device is into an authorized repair centre because I had some problems regarding charging battery ! After the battery was fully empty, device refuses to charge even after several days ( and ofcourse I changes more charger and also USB cable ) . I hope to get it back soon ...
Thanks. I hope you will have your phone back soon.
surdu_petru said:
Hello !
Because of some changes to the kernel by updating to 3.0.101 - it seems that some patches affect battery life , I released today a new kernel based on kernel linux 3.0.8 - more battery friendly !
This new custom kernel is identically with the first kernel based 3.0.101 but this time was reverted to 3.0.8 - and there are no issue regarding battery life !
Thank you for understanding
Click to expand...
Click to collapse
What kernel is therefore recommended to download and has better battery life?
update_kernel_3.0.101.zip md5 : bda0dee9fe0d64ed3df12be59092287e
or
update_kernel_3.0.8.zip md5 : 3fac913be4314511ba0252aede6d4d28
Thanks
any news @surdu_petru ?
jkmaxfli said:
What kernel is therefore recommended to download and has better battery life?
update_kernel_3.0.101.zip md5 : bda0dee9fe0d64ed3df12be59092287e
or
update_kernel_3.0.8.zip md5 : 3fac913be4314511ba0252aede6d4d28
Thanks
Click to expand...
Click to collapse
Please, use update_kernel_3.0.8.zip md5 : 3fac913be4314511ba0252aede6d4d28 for a better battery life !
meilbox said:
any news @surdu_petru ?
Click to expand...
Click to collapse
As soon as I'll start to work on this device I'll let you to know ...
Some news Surdu?
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
!DISCLAIMER!
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
----NOTICE----
ATM this kernel is only compatible with 6.x CM/AOSP and other based roms.Please don't expect performance of a one plus 3 and battery life of an inverter.
NOTE- the stock settings for kernel is for battery life and light gaming so incase you feel any lag,then please tune it up to your liking!
!!!!WANING!!!!
Before posting, DO read EACH and EVERY "OP" POST made by me!! Any post which is rude, report bugs incorrectly,USELESS POSTS or ask for ETAs, WILL be REPORTED to the MODS!
All information you may be looking for can be found either in this thread or under F.A.Q or by performing a simple search. Think before you post.You have been warned!!!
Kernel features:-
Build with Latest UBER GCC 4.9.4 Toolchain(18-7-16 by despairfactor)
Based on CAF tag LA.BR.1.3.3_rb2.21
Synced with latest changes by Cyanogenmod
Kernel compressed with xz compression
-O3,graphite,Justarchi's,cortex a53 and other optimisations
enabled both gfs and arch power
New CPU Governers-zzmove,despair,elementalx
Big clusters at 1804Mhz & smal clusters at 1440 Mhz
Several new i/o(zen,vr,sio,sioplus,fiops,tripndroid,etc)
Added MSM Hotplug
Using Anykernel2 by osmosis
Removed MPdecision
exfat and NTFS support
Added Kcal & Ksm
Added powersuspend and frandom
Fully permissive kernel
disabled loads of craps
Quick Charge 2.0 support
Busybox v1.24.2
Enabled Advanced Tcps(default:Westwood)
entropy updates and tuned zram values with tuned up governers
miscellaneous updates
More(i forgot)
****NOTICE****
This is a kernel,so please do not expect REGULAR builds.New builds can be rolled out the same day or once in a week or maybe once in a month.
I will not add lots of fancy stuffs.whatever you see here goes under several tests first and if it performs well,then it is added.Suggestions are always welcomed!
Do not post external links or make mirros without my permission!
Please read FAQ properly, will try to answer all questions there and don't post uselessly and get yourself in trouble.
Recommended app for tuning: Kernel Adiutor
HOW To FLASH
The lastest version TWRP (3.0.2.0) IS RECOMMENDED!(i use thestrix's f2fs twrp)
Keep the kernel.zip in your ext sd/internal sd.
Boot to latest TWRP(recommended)
dirty flash rom(!!IMPORTANT!!)
Flash the Kernel.zip
WIPE DALVIK/CACHE (for good measure)
Reboot!
Bugs:
some random reboots(bugged in source)
Not working on:
idk,you tell me :v
Downloads and Changelog in Post #2
NOTE:First boot may take some time,so while its booting,don't forget to press the thanks button!(its free)
Credits:
@TheStrix for the initial bringup:good:
@Umang96, @ktomov, @Santhosh M @thomas1991_12, @zound @Plamb1r, @osm0sis, @neobuddy89 (my inspiration ), @DespairFactor and all other great developers!
(If i forgot your name,then please Drop me a PM!!)
XDA:DevDB Information
Infected Kernel, Kernel for the Xiaomi Redmi Note 3
Contributors
neonkat
Source Code: https://github.com/neonkat/kenzo_kernel
Kernel Special Features:
Version Information
Status: Testing
Current Stable Version: R2
Stable Release Date: 2016-07-21
Created 2016-07-20
Last Updated 2016-07-21
Reserved
----Downloads----
6.x marshmallow
AndroidFileHost(Click ME!)
-----------------------------------------------------------------------------
DO NOT CREATE MIRRORS!!IF LINKS ARE NOT WORKING THEN TELL ME!!!
Changelog:
Code:
R2:(21-07-2016)
*Down streamed to 3.10.93(will bump it in future)
*Fixed music issue
*Unlocked 1440 Mhz (thanks @ktomov)
*misc. upstream updates and fixes
R1:(20-07-2016)
*initial release
NOOB F.A.Q
Q)How is the kernel?does it improve stuffs?
A-EITHER USE IT OR GTFO.
Q)does this kernel work with xyz rom?
A-this works with 6.x and OTHER based roms.
Q)Kernel didn't flashed!
A-put the kernel.zip in internal sd and flash.
Q)How to use Color Control?
A-use kernel adiutor or savoca's kcal controller app
Q)Developer!i am having a issue!
A-Get me a logcat and a dmesg with proper explanation to reproduce it.
Q)can you share good settings?
A-sure,check post #4
Q)why is there no boot.img?
A-because we are using anykernel script.
Simple profile for kernel
#Gaming(performance)
big clusters-elementalx/performance
small clusters-elementalx/performance
max cpu freqs
gpu governer-performance
i/o-zen/fiops
turn off adreno idler
#Balanced
big clusters-interactive/zzmove
small clusters-bioshock
i/o-sioplus
#Heavy Multi-tasking
big clusters-interactive
small clusters-bioshock
i/o-bfq/sioplus
#Mother of GOD battery life(ofcourse laggy)
both cpu-powersave
big clusters-off
small clustters-1190mhz
i/o-noop/fifo
#Personal Setup
big clusters-interactive
small clusters-bioshock
i/o-sioplus
i/o readahead-1024
have a good profile?let me know so can add here!
P.s-very few stuffs but will be updated as new things will be added to kernel.
Want your our setup?follow this.
Remember the Drill
Good Work.....Thanks
I don't think it works with miui 6.0 but i would like to make sure. Did anybody try with 7.3.9 rom ported by anderson?
Thanks for the New kernel
like to see such good dev here.
TacoNikky said:
I don't think it works with miui 6.0 but i would like to make sure. Did anybody try with 7.3.9 rom ported by anderson?
Thanks for the New kernel
Click to expand...
Click to collapse
nope,sorry only aosp/cm mm based roms.for miui,sorry,i can't support.(lack of time)
neonkat said:
nope,sorry only aosp/cm mm based roms.for miui,sorry,i can't support.(lack of time)
Click to expand...
Click to collapse
Reed pm plz.
Sent from my Redmi Note 3 using XDA-Developers mobile app
ps-i forgot to bump readahead for i/o :v,please update it manually to 512(stable).
post #4 also updated,if you have some good setup,let us know.☺
Hotplug is working
installed
wow !!
first kernel with working hotplug ?
amster64 said:
installed
wow !!
first kernel with working hotplug ?
Click to expand...
Click to collapse
sorry to say but R1 has no sound(no speaker,no headphone)(missed some stuffs ;_.
please revert to stock kernel for now,i will fix this asap.
you can flash stock boot.img via twrp or flashify/flashr.
I've tried this kernel and is very good but i can't watch any type of video
Gigabyte29 said:
I've tried this kernel and is very good but i can't watch any type of video
Click to expand...
Click to collapse
sorry,i missed some changes,i will update it asap.
till then read last few posts to revert to stock kernel.
neonkat said:
sorry,i missed some changes,i will update it asap.
till then read last few posts to revert to stock kernel.
Click to expand...
Click to collapse
Ok i will try the next version.
Good work anyway :good:
Elementalx has a big performance issue , 707/2400 on geekbench vs 1400/3700 on performance ( not everyone wants his CPU 100% all the time)
One question, "Quick Charge 2.0 support" , what that means? quick charging with qualcomm adapter is now working?
Hi...Flashed on mokee rom and booted but SYSTEM UI keeps crashing..i cant get dirty flash in OP you need to dirty flash or Clean? and official twrp gave error 1.flashed via alka twrp
sumitvib said:
Hi...Flashed on mokee rom and booted but SYSTEM UI keeps crashing..i cant get dirty flash in OP you need to dirty flash or Clean? and official twrp gave error 1.flashed via alka twrp
Click to expand...
Click to collapse
i use f2fs twrp by thestrix,no issue for me.incase you get issue with recovery,get me recovery logs.
dirty flash your rom(wipe system,cache and dalvik cache and flash your rom+gapps and then kernel).
Hello to everyone !
>> OmniROM 6.0.1 <<
>> OpenKirin Development Project For Huawei P8Lite <<
> Officially Supported Devices : ALE-L02/L21/L23 & CHM-U01/U03 <
*** Stable Version ***
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OmniROM is a free, community built, aftermarket firmware distribution of Android 6.0.1 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Click to expand...
Click to collapse
* Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
Click to expand...
Click to collapse
Huawei P8Lite | OmniROM | Downloads :
Code:
[CENTER]
* [URL="https://www.androidfilehost.com/?fid=817906626617938705"]omni-6.0.1-20171014-alice-OpenKirin.zip[/URL] [B][I]md5 :[/I][/B] 8ebe6ca947f98133d307fa582f377e81
* [URL="http://opengapps.org/"]OpenGAPPS[/URL] ( check : ARM64, 6.0, nano ) - [B][COLOR="Red"]please use always the last update[/COLOR][/B] !
[/CENTER]
Installation :
Code:
[CENTER]
* require : [URL="https://forum.xda-developers.com/p8lite/orig-development/twrp-t3583180"]TWRP 3.1.1-0[/URL] - already installed on your device
* your device must be updated to EMUI 4.1 B895/B896 !
* this build does not contain Gapps ;
* [B][I]please go to twrp and format data, then reboot again to twrp ( if you do not come from AOSPA/RROS)[/I][/B]
* go to TWRP -> Wipe -> Swipe to Factory Reset !
* Install zip !
* ( If you want to install Gapps, you should install it at the same time with OmniROM - check add more zips ! )
* Enjoy !
[/CENTER]
Currently Working :
Code:
[CENTER]
* touchscreen
* adb & mtp
* internal/external storage
* wifi with hotspot
* bluetooth with a2dp
* NFC
* GPS
* Fully Working Footej Camera ( via PlayStore )
* dual SIM support !
* Off-mode charging
!!! [B][I]ROM stable, fast & smoothly[/I][/B] !!!
[/CENTER]
Currently Not Working :
Code:
[CENTER]
[STRIKE]* Camera Video Recording [/STRIKE]
[STRIKE]* SIM2 disabled[/STRIKE]
[STRIKE]* HWC disabled[/STRIKE]
* [B][I][COLOR="Red"]also, may be some others small issues ![/COLOR][/I][/B] ( please, check the second post ... )
[/CENTER]
Credit :
Code:
[CENTER]
* [URL="http://forum.xda-developers.com/member.php?u=7354786"]XePeleato[/URL]
* [URL="https://forum.xda-developers.com/member.php?u=4960686"]OldDroid[/URL]
* [URL="http://forum.xda-developers.com/member.php?u=4400604"]Meticulus[/URL]
* [URL="http://forum.xda-developers.com/member.php?u=3208754"]codeworkx[/URL]
* [URL="https://forum.xda-developers.com/member.php?u=4883214"]haky 86[/URL]
* [URL="https://omnirom.org/"]OmniROM Team[/URL]
[/CENTER]
Kernel GPLv2 compliant : android_kernel_huawei_alice !
Device Tree : android_device_huawei_alice
Vendor : android_vendor_huawei_alice
This ROM is provided by OpenKirin TEAM (XePeleato, OldDroid, surdu_petru )
Screenshots :
Best regards !
XDA:DevDB Information
OmniROM, ROM for the Huawei P8lite/P8 Lite
Contributors
surdu_petru, XePeleato, OldDroid
Source Code: https://github.com/OpenKirin
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Android MM (EMUI 4.1)
Based On: AOSP
Version Information
Status: No Longer Updated
Stable Release Date: 2017-04-30
Created 2017-04-30
Last Updated 2017-12-02
Issues that may occur during use our OmniROM :
* external storage may disconnect/ejected from time to time ! Fixed !
* some video may not be properly loaded, please use MX Player to fix this issue !
* some video on youtube will not be properly loaded on default resolutions !
*** reserved ***
Awesome. Nice that you took Omnirom too since it is so stable. I will test it tomorrow if you relase link and give feedback then :good:
Edit: btw. Is Haky now working more with OpenKirin team?
@ Surdu ... I know that's rude of me to ask something like that , but Xepeleato and the Open Kirin team give us hope at this devices , so
I want you just to expand this hope to 4x users with the same kirin 620 , BTW .. Xepeleato once had made a bootable ROM for us
Thanks for your good job
Regards
surdu_petru said:
*** new rev ***[/QUOTE
Open Kirin You Can Make A Resurrection Remix ROM Is One Of The Best I Could Not Create One By My PC For The P8 Lite You Can.
Click to expand...
Click to collapse
masredf said:
surdu_petru said:
*** new rev ***[/QUOTE
Open Kirin You Can Make A Resurrection Remix ROM Is One Of The Best I Could Not Create One By My PC For The P8 Lite You Can.
Click to expand...
Click to collapse
Good Idea
Click to expand...
Click to collapse
backing up phone and installing on honor 4c
benkadu000 said:
backing up phone and installing on honor 4c
Click to expand...
Click to collapse
I can't wait, I will skip backup :laugh:
Smooth ?, I am downloading
Wysłane z mojego ALE-L21 przy użyciu Tapatalka
It's Coming !!!!!
Thank you so much!! Gonna flash it in minutes...
Vika__ said:
Awesome. Nice that you took Omnirom too since it is so stable. I will test it tomorrow if you relase link and give feedback then :good:
Edit: btw. Is Haky now working more with OpenKirin team?
Click to expand...
Click to collapse
Thanks ... I'll wait your feedback
No !
Szabi01 said:
Thank you so much!! Gonna flash it in minutes...
Click to expand...
Click to collapse
I'll wait also your feedback Thanks !
Cool, you're the best! Realease the Hype!!! Downloading and will give feedback.
Are games working on this rom?
filiplongac said:
Cool, you're the best! Realease the Hype!!! Downloading and will give feedback.
Click to expand...
Click to collapse
Thanks, I'm waiting ...
VladHD said:
Are games working on this rom?
Click to expand...
Click to collapse
Yes, sure
Are there problems with video recording only in stock camera app?
Sent from my ALE-L21 using Tapatalk
Or I have problems with partitions or updater script is bad. Everytime I want to flash omnirom it reboots to recovery mode
Audriuskins said:
Or I have problems with partitions or updater script is bad. Everytime I want to flash omnirom it reboots to recovery mode
Click to expand...
Click to collapse
What TWRP do you have? I didn't have a problem. It's booting now!
dominj97 said:
What TWRP do you have? I didn't have a problem. It's booting now!
Click to expand...
Click to collapse
I fixed the problem, using latest twrp by surdu.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AOSPA (Paranoid Android) - Huawei P8Lite
> Officially Supported Devices : ALE-L02/L21/L23 & CHM-U01/U03 <
> ROM Support Single & Dual SIM Devices <
*** Stable Version 7.3.1 ***
~ Note ~
* Xposed, Custom kernel or restore backup it's not supported on any way *
( please do not expect to be helped if you are in one of these situations )
~ Features ~
* pure & clean Android, based AOSP *
* Substratum Theme Engine *
* PA-exclusive Color Engine *
* PIE Controls system *
* Accidental Touch (prevention) functionality, Pocket Lock *
* Three-Finger Swipe Screenshot *
* PA Browser *
* Dual SIM support *
* WiFi/NFC/BT/GPS *
* Kernel updated to 3.10.108 *
* SDCardFS support *
* Fast with smoother UI *
* DT2W (Only For Huawei P8Lite) *
~ Downloads ~
* pa_alice-7.3.1-EOL-20180203.zip md5 : 88d0fb34b272c41dc0992f66d2c594a3
* Gapps (ARM64/7.1) - please, use always the last update
~ Installation ~
* It is mandatory to update your device to EMUI 4.1 B895/B896 !
( to download B895/896 Firmware, please check the next post )
* you must also have this recovery version installed : TWRP 3.1.1-0
* go to TWRP 3.1.1-0 and format data then reboot to TWRP and take a factory reset !
* install AOSPA ROM and reboot to system
* reboot device again in twrp and install gapps ( optional )
* need ROOT ?? ( optional Install SuperSU or Magisk )
* reboot to System
* Enjoy !!!
~ Update ~
* copy the new update of AOSPA to Internal/External Storage
* reboot device to : TWRP 3.1.1-0
* wipe cache & dalvik cache
* install new update of AOSPA
* need ROOT ?? ( optional Install SuperSU or Magisk )
* reboot to System
* Enjoy !!!
~ Issues ~
* Encryption *
** Use XPlayer for render all your video without issues !
** Use Footej Camera - to record video ( working also for 1080p ) !
*** This ROM require a SIM with LTE capability !
~ Credit ~
* XePeleato
* OldDroid
* Meticulus
* kacperes00
* dominj97
* _OBEDDO
* AOSPA Team
Kernel GPLv2 compliant : android_kernel_huawei_hi6210sft !
This ROM is provided by OpenKirin TEAM (XePeleato, OldDroid, surdu_petru )
Screenshots :
XDA:DevDB Information
AOSPA 7.1.2, ROM for the Huawei P8lite/P8 Lite
Contributors
surdu_petru, XePeleato, OldDroid
Source Code: https://github.com/OpenKirin
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: EMUI 4.1
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: v7.3.0
Stable Release Date: 2017-09-11
Beta Release Date: 2017-07-30
Created 2017-07-30
Last Updated 2018-02-05
Stock EMUI 4.1 B895/B896
Stock EMUI 4.1 B895/B896 for Huawei P8Lite !
Downloads :
b895_update.zip md5 : 0868fab65e2a38bff95408c02ffa0aba
B896_update.zip md5 : 2b3d6b4b0945592ce506d44874f00d73
Installations : via TWRP 3.1.1-0 like any other ROM !
SIM 2 work on this one?
So, how if I flash from emui 4?
Did you managed to fix voice distorting?
YowPa said:
SIM 2 work on this one?
Click to expand...
Click to collapse
Please, read OP - thanks !
adenurzaman578 said:
So, how if I flash from emui 4?
Click to expand...
Click to collapse
By using TWRP 3.1.1-0 !
Vika__ said:
Did you managed to fix voice distorting?
Click to expand...
Click to collapse
Finally, yes
Great work! Hopefully you can manage to fix gps. What about relasing newest device tree for 7.x roms too?
Rom OS version: 2.3.x gingerbread, please fix description... Can someone show me 3d test score pls?
GPS plz
---------- Post added at 07:44 PM ---------- Previous post was at 07:43 PM ----------
Oh and how about 720p60fps ?
mp2201 said:
GPS plz
---------- Post added at 07:44 PM ---------- Previous post was at 07:43 PM ----------
Oh and how about 720p60fps ?
Click to expand...
Click to collapse
Check OP
how about overheating? In RR was orrible
Where I can find a stock rom emui 4.1 for p8 lite I have the last b604 and it is emui 4.0.3.
DarkJoker360 said:
how about overheating? In RR was orrible
Click to expand...
Click to collapse
Sorry, not yet tested !
juanche007 said:
Where I can find a stock rom emui 4.1 for p8 lite I have the last b604 and it is emui 4.0.3.
Click to expand...
Click to collapse
You can download from here ! Take a FULL version of B895/896 , the FULL version ( update.zip) can be easily installed on your device via TWRP 3.1.1-0
Good luck !
If someone can answer me
Does it have option for customize navigation bar buttons ? Add an button and put custom actions for long pressing on buttons ?
I never used nougat before RRos ROM ^^"
Sim is really unstable :/ Can I disable 2nd sim?
Always a great work,thanks for take You time for do this,Good Luck for all You Will do in a future!
Enviado desde mi ALE-L23 mediante Tapatalk
Sim same as on xepeleatos first los14. Unstable
kacperes00 said:
Sim is really unstable :/ Can I disable 2nd sim?
Click to expand...
Click to collapse
At least for me seems to be indeed stable and I talk about the both SIMs
The both SIMs was tested before, that's why I uploaded a ROM with dual SIM support .
Please, what device do you have ? - can you provide a radio logcat ?
Thanks !
( adb logcat -b system -b radio -b events -b main > radiolog.txt )
Vika__ said:
Sim same as on xepeleatos first los14. Unstable
Click to expand...
Click to collapse
Yes, I think is because you don't have EMUI 4.1 installed on your device !
Can you confirm your "Baseband version : 22.355.03.00.00" ??
Thanks !
I do not find emui 4.1 I have the latest European version B605 ..
surdu_petru said:
Yes, I think is because you don't have EMUI 4.1 installed on your device !
Can you confirm your "Baseband version : 22.355.03.00.00" ??
Thanks !
Click to expand...
Click to collapse
I have that baseband version. But i apologize, i didn't notice i have to be on emui 4.1 first. Will be soon back
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/* Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you blame me in any way for what happens to your device, I will laugh at you.
* BOOM! goes the dynamite
*/
I would like to share an awesome ROM complied by me. This is the first ROM with EAS kernel and EAS related modifications on device side. Features are same as in the official citrus but there are some cool additional features:
- Built with Linaro 6.3.1
- A lot of modification on device side to get a well working EAS
- Darkness™ tweaked AGNi EAS kernel (Use Spectrum app)
- 24 bit 192 kHz audio playback support
- Fingerprint unlock
- Magisk added (optional)
- ARISE Sound Systems™ core and Android O QC effects module added (optional)
Made in 2 versions, a normal and an other for audiophiles with Magisk and ARISE integrated.
Viper and the other 16 bit DSPs wont work due to 24 bit audio support. If you want to use Viper and the others and dont want 24 bit audio, flash the 24 bit audio revert zip.
Downloads(newest version):
Basic version
Magisk+ARISE version
100 Hz bootimg, if you have touch panel issue
24 bit audio revert zip
Changes:
2017.09.04:
- AGNi kernel updated to 10.5
- Better RAM management for 2GB devices
- Added some stuff from LG V20, more smooth now
- Changed to Shuttle 1.6.7 stable
- Some other tweaks added
2017.09.19:
-AGNi 10.8
-Updated spectrum profiles
-FP unlock
-Some updated blobs
-Shuttle removed
-ARISE 0918
-Magisk 10.4
Flashing instructions:
- Download ROM and GAPPS
- Reboot to recovery and Backup existing ROM
- Wipe System, Data, ART cache, Cache
- Flash ROM, Gapps and reboot...
Credits:
PhenomX1998, Adarsh1998, TheStrix, psndna88, XeonDead , MOVZX , Amol Amrit, ARISE Sound Systems™ team, Magisk team and the other devs
Sources:
https://github.com/Citrus-CAF
https://github.com/ktommy91
Reserved
Sent from my Redmi Note 3 using Tapatalk
nice :v
Enviado desde mi Redmi Note 3 mediante Tapatalk
Reserved
Whats EAS...? Any insight abt this
hasan4791 said:
Whats EAS...? Any insight abt this
Click to expand...
Click to collapse
It features make u phone epic lagging :v
hasan4791 said:
Whats EAS...? Any insight abt this
Click to expand...
Click to collapse
New scheduler which gives better performance and battery life for us.
Here is an article from AA: http://www.androidauthority.com/arm-bringing-energy-aware-scheduling-to-android-664926/
Thanks for rom but Goodix not working sir
I need to install official agni for make goodix working.
no eq how to change audio profiles
m1kh41l said:
Thanks for rom but Goodix not working sir
I need to install official agni for make goodix working.
Click to expand...
Click to collapse
Thanks the report ,I'll fix it.
Thanks a lot for your hard work ktommy91, I'll try just now.
Is CAF source code still included in the rom?
Thanks ..I am on it for two days, standby is very good, during usage I notice little drains.. But ROM is awesome
Sched or schedutil cpu governor is there?
bahblo said:
Sched or schedutil cpu governor is there?
Click to expand...
Click to collapse
Yeah, it has sched.
Thanks will try this soon...
@ktommy91 did you merged the commits about time service blobs? Lastly there was that time resetting issue in citrus.
scrubjay55 said:
@ktommy91 did you merged the commits about time service blobs? Lastly there was that time resetting issue in citrus.
Click to expand...
Click to collapse
Yes of course, its based on the lastest sources.
ktommy91 said:
Yes of course, its based on the lastest sources.
Click to expand...
Click to collapse
Is this rom still based on CAF source?
Any suggestions for player support 24bit? Poweramp with no arise doesn't work and with arise it only 16 bit
And anyway to integrate shox sound mod also ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi guys, here is DarkOne Custom kernel for Nokia 7 Plus
Disclaimer:
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
The goals of the this kernel are :
Better Battery performance
smooth experience
latest Linux kernel upstream
latest caf changes
Installation guide :
Reboot to recovery [TWRP]
Backup boot.img , just in case
Flash the kernel Zip
reboot and enjoy
Changelogs :
DarkOne v2.0
DarkOne v1.0
Downloads :
Github Releases
AFH : soon
XDA:DevDB Information
DarkOne Kernel For Nokia 7 plus, Kernel for the B2N
Contributors
nageen9211
Source Code: https://github.com/archie9211/android_kernel_nokia_B2N/
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v2.0
Stable Release Date: 2018-01-22
Created 2018-11-05
Last Updated 2018-01-22
Changelogs / Features :
* f2fs fixes by aosp
* added msm_performance back with fix
* with arm-32 vDSO implementation
* Battery performance improved
* GPU tuning little bit
* interactive gov improvement
* CPU Input boost added
* added gcma
* Headphone gain improved , correction in gain values
* Fixed GPU SIMPLE ALGORITHM in defconfig (Check For gaming performance)
Thanks to @arunassain for :
* added GPU tuner and devfreq boost
* enabled power efficient workqueue by default
* And Lot of kernel optimisations ( thanks to @arunassain )
* Kernel Optimized For CPU
* Added Adreno Idler (for gpu) (default : on)
* USB Fast Charge Enabled By default
* Added State Notifier Drivers
* Audio Regulator OC (Better Bass Output)
* I/O Sched added ( SIO , FIOPS, ZEN and MAPLE )
* Performance Improvements
* Many Under the hood changes
* Merge Linux Stable v4.4.170
* Merge AOSP kernel/common
* Kernel optimized for a53
Enabled Schedutils CPU Governor
Added F2FS support
Sound Control(Head Phone Gain)
USB Fast Charge
Boeffla Wake Lock Blocker
Wire-guard Introduced
KCAL control
Flashed it just now ,Everythings Working okay...Good work Dev
It works perfectly fine
You can use kernal auditor
Recommend:
Darkness-Control-v666-1007.apk
Link: https://androidfilehost.com/?fid=818222786056028561
Thanks its working great
dark_lord said:
Flashed it just now ,Everythings Working okay...Good work Dev
Click to expand...
Click to collapse
AFAIK To Flash Twrp I must have unlocked bootloader and there is no official bootloader unlock from HMD for Nokia 7 plus ...how did u guys unlock and flash twrp and kernel ?
3ilal said:
AFAIK To Flash Twrp I must have unlocked bootloader and there is no official bootloader unlock from HMD for Nokia 7 plus ...how did u guys unlock and flash twrp and kernel ?
Click to expand...
Click to collapse
UNLOCK Methode is payed !!!
So visit our telegram channel for more details
Chennel link:http://t.me/Nokia7PlusGlobal
Nice to see new kernels for our device!
Thank you.
Anyone else facing phone not going into deep sleep after flashing the kernel?
hazam1992 said:
Anyone else facing phone not going into deep sleep after flashing the kernel?
Click to expand...
Click to collapse
No
---------- Post added at 06:08 AM ---------- Previous post was at 06:00 AM ----------
The main issues reported are battery drainage on standby and last on intermediate cpu tweak
Last can be fixed by turn off adreno idler from gpu
This will be removed in next build
Hope battery standby drain fix soon
By flashing this kernel high battery drain of some gsi image like havoc can be fixed
Headphone gain is good for earphones to use in low volumes
How to uninstall for if had problems or OTA ?
saiz0313 said:
How to uninstall for if had problems or OTA ?
Click to expand...
Click to collapse
Before kernal install you have to backup boot through twrp
If you wanna restore use that boot ....
Can disable perfd?
I've flashed it on my Nokia 7 Plus TA-1055, but the Wi-Fi didn't work (I cannot enable it in any way)...restored previous boot image
death_jax said:
I've flashed it on my Nokia 7 Plus TA-1055, but the Wi-Fi didn't work (I cannot enable it in any way)...restored previous boot image
Click to expand...
Click to collapse
Heard Ta-1055 model contains many issues..hope it will fix soon
DarkOne V2.0 released :
* Linux stable 4.4.171
* merged aosp common kernel
* Fixed the reboot bug on tethering
* Battery optimisations
* disables adreno idler(we dont need that)
Download v2.0
death_jax said:
I've flashed it on my Nokia 7 Plus TA-1055, but the Wi-Fi didn't work (I cannot enable it in any way)...restored previous boot image
Click to expand...
Click to collapse
wifi drivers are totally fine from my side, no issue faced on any variant , still can u give me dmesg (kernel logs )
or u can test version 2.0 .
nageen9211 said:
wifi drivers are totally fine from my side, no issue faced on any variant , still can u give me dmesg (kernel logs )
or u can test version 2.0 .
Click to expand...
Click to collapse
I'm on october Oreo patch, and of course I'll try it and report if there are issues or not on v2.0 too (with dmesg)
nageen9211 said:
wifi drivers are totally fine from my side, no issue faced on any variant , still can u give me dmesg (kernel logs )
or u can test version 2.0 .
Click to expand...
Click to collapse
Here they are dmesg files of DarkOne v2.0.
dmesg1 before and dmesg2 after clicking WiFi button (WiFi not successfully activated).
death_jax said:
Here they are dmesg files of DarkOne v2.0.
dmesg1 before and dmesg2 after clicking WiFi button (WiFi not successfully activated).
Click to expand...
Click to collapse
thanks for the logs, and feedback, I ll look into it,
meanwhile , i ll suggest u flash any magisk module to make kernel permissive. issue might be because of enforcing selinux.
also what is the android version of your rom and the security patch your are running on.
thanks.