Preamble
As the title suggests, I had a Nexus 5 running stock Android 5.0, with root and TWRP, and wanted to update to Android 5.0.1 (without losing all my data, of course). I couldn't find any guides for my particular circumstances, so after working out how to do it myself, I thought I'd share my method.
Note: This guide is not for the uninitiated. Be prepared to Google something for yourself if you don't understand it.
Prerequisites
Before starting this guide, you should have:
A Nexus 5 that running stock Android. The presence of root/Xposed/custom recovery (maybe custom kernels?) shouldn't be relevant, but I can't vouch for the efficacy of this guide if you've done something obscure to your install.
Android SDK tools, specifically the ADB and fastboot binaries. Additional USB drivers may be required on Windows.
The factory image for the Android version you are currently running.
1. Uninstall root and other /system modifications
If you have rooted your Android, and/or installed BusyBox, Xposed or other modifications to /system, you will need to uninstall these modifications. Failing to do so will cause the OTA to complain that there's something funky going on in your /system partition.
You may be able to manually uninstall each of these modifications, but this was not enough for my install – doing a ‘Full unroot’ in SuperSU still left behind files in /system. The easiest way to uninstall all /system modifications is to reflash the /system partition.
Extract the Nexus 5 factory image (e.g. hammerhead-lrx21o-factory-01315e08.tgz), yielding a directory with files such as flash-all.bat and image-hammerhead-XXXXXX.zip. Do not use the flash-all script, as this will unnecessarily wipe all data on the device.
Extract the image-hammerhead-XXXXXX.zip file, specifically the system.img file.
Open a command prompt/terminal window.
Connect the phone to the computer with a USB cable.
Boot the phone into the bootloader.
Method 1: Power down the phone, then hold VolUp + VolDn + Power until the phone boots into the bootloader.
Method 2: From the terminal, run adb reboot bootloader while the phone is still powered on.
From the terminal, run fastboot flash system /path/to/system.img.
2. Uninstall any custom recovery
Custom recoveries don't seem to support OTA updates, making it necessary to uninstall the custom recovery by reflashing the stock recovery.
Extract the recovery.img file from the factory image, as in Part 1.
Open a command prompt/terminal window, connect the phone to the computer, and boot into the bootloader, as in Part 1.
From the terminal, run fastboot flash recovery /path/to/recovery.img.
Optional: Reflash boot.img and/or cache.img
Some users have reported that reflashing system.img was not sufficient, and that reflashing boot.img and/or cache.img was also necessary. I did not have this problem, but if you do:
Extract the boot.img and/or cache.img files from the factory image, as in Part 1.
Open a command prompt/terminal window, connect the phone to the computer, and boot into the bootloader, as in Part 1.
From the terminal, run fastboot flash boot /path/to/boot.img.
From the terminal, run fastboot flash cache /path/to/cache.img.
3. Apply the OTA update
The simple part. In the bootloader, use the VolUp/VolDn buttons to select ‘Start’, then press the Power button, to reboot into Android. Follow the system update instructions to install the OTA update.
4. Reflash the custom recovery and re-root
Also self-explanatory.
Hey,
I just wanted to say thanks. This totally fixed the problem I was having. I also want to add that after I flashed the system.img, I was getting errors related to "EMMC:/dev/block/platform/msm_sdcc.1/by-name/boot" with a bunch of numbers after. I googled it and found I had to also flash boot.img, and after that, the OTA worked fine. I would assume if anyone else gets errors like this, they should flash whatever img it shows in the error (ie: mine said /by-name/boot so I flashed boot.img).
-BGM
It worked for me
I've always been using a toolkit for my rooting purposes, I have done Full Unroot on SuperSU, but still getting an error when trying to update to 5.0.1
Will flashing stock wipe everything(whatsapp image, camera's,messages, etc etc)on my phone?
azlan96 said:
I've always been using a toolkit for my rooting purposes, I have done Full Unroot on SuperSU, but still getting an error when trying to update to 5.0.1
Will flashing stock wipe everything(whatsapp image, camera's,messages, etc etc)on my phone?
Click to expand...
Click to collapse
I also had problems using ‘Full Unroot’ in SuperSU. It's not actually as ‘full’ as it sounds.
Flashing a full factory image would normally wipe everything, but carefully following this guide will only reset the /system partition, not any user data.
I'd like to say thank you very much! I was looking for this kind of tutorial... I encountered an error while following all the steps because I forgot I had a custom kernel. So I wanted to add that if you have a custom kernel remember to do the same steps as described above for the kernel (return to stock) and then follow the system and recovery steps afterwards.
If you don't like running commands in terminal you can use Nexus Root Toolkit, on advanced, you have all the commands you need available.
Thank you very much RunasSudo
Taiyo85 said:
I'd like to say thank you very much! I was looking for this kind of tutorial... I encountered an error while following all the steps because I forgot I had a custom kernel. So I wanted to add that if you have a custom kernel remember to do the same steps as described above for the kernel (return to stock) and then follow the system and recovery steps afterwards.
If you don't like running commands in terminal you can use Nexus Root Toolkit, on advanced, you have all the commands you need available.
Thank you very much RunasSudo
Click to expand...
Click to collapse
I have my ADB and Fastboot ok as confirmed by nexus root toolkit, but I am not sure on how to use terminal.. I launched command prompt but it doest recognise all the commands..
Tried Flash Stock + Unroot on Nexus Root Toolkit but the software will crash (fastboot.exe has stopped responding)
I am really clueless on what to do next..
azlan96 said:
I have my ADB and Fastboot ok as confirmed by nexus root toolkit, but I am not sure on how to use terminal.. I launched command prompt but it doest recognise all the commands..
Tried Flash Stock + Unroot on Nexus Root Toolkit but the software will crash (fastboot.exe has stopped responding)
I am really clueless on what to do next..
Click to expand...
Click to collapse
Flash Stock + Unroot wipes everything and defeats the purpose of the tutorial made by RunasSudo
First and foremost you should download Android SDK (Tools only) on http://developer.android.com/sdk/index.html and then ask to install the extra: Google USB Driver.
With Nexus Root Toolkit you don't need terminal, click on advanced and you should see options to flash through fastboot the system only, recovery and kernel. It is pretty straighforward and it asks where the .img are in your computer
Thanks! This guide worked.
For Ubuntu users, you need to install adb and fastboot with these commands :
sudo add-apt-repository ppahablet-team/tools && sudo apt-get update (optional)
sudo apt-get install android-tools-adb android-tools-fastboot
Thanks for the great step by step.
As with some of the other posters, re-flashing system.img was not enough for me, I had to also re-flash the boot.img. Once that was done, I had no problems side loading the update and am now running LRX22C.
I only seem to fiddle with adb once a year - when it OTA time comes - and can never seem to remember some of the steps that need to be taken. Reading through some of the other threads, I have a feeling a lot of people who rooted/custom recovery and cant do the OTA are going to be doing complete image re-flashes when this guide makes that completely unecessary.
thanks again,
.d
BananasGoMoo said:
I googled it and found I had to also flash boot.img, and after that, the OTA worked fine.
Click to expand...
Click to collapse
datcon said:
As with some of the other posters, re-flashing system.img was not enough for me, I had to also re-flash the boot.img.
Click to expand...
Click to collapse
Thanks for the feedback! I've added a note about boot.img to the OP.
+1 for flashing boot.img worked perfect after I did that.
I tried with this tutorial. I flashed system and recovery and then restart. Confirm OTA but I get ERROR.
Then I flashed boot as it was described. Now I don't get OTA In About phone, I'm still on 5.0.0, Check for updates now don't find update
Any idea?
UPDATE - UPDATE: After hour now it is here ... super, it works.
This walkthrough was most helpful! Ended up replacing the boot.img as well since I had ElementalX installed. My apps are optimizing as we speak. Thank you!
Worked for me. What a hassle!
Here is a summary of the process for those looking for a less wordy procedure, with a few added steps:
Download Nexus 5 5.0 (LRX21O) file (note: NOT 5.0.1 yet) https://developers.google.com/android/nexus/images
Unzip via 7-zip multiple times in order to get boot.img, recovery.img, system.img
Enable USB debugging: http://www.kingoapp.com/root-tutorials/how-to-enable-usb-debugging-mode-on-android-5-lollipop.htm
Plug phone into PC > cmd prompt where adb is installed > type "adb devices" to ensure connection is valid (will need to authorize via popup on phone > then "adb devices" should return your device id and "device"; if it says "unauthorized" then look for the popup on your phone)
adb reboot bootloader
Put system.img, recovery.img, and boot.img in same folder as fastboot.exe
Run commands:
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot erase cache (this is optional. I didn't have to do it, but you might)
Use Volume Up/Down to select Start > press Power Button to reboot
Update via Settings > About Phone > System Update
Re-flash TWRP recovery:
Get the file from here: http://forum.xda-developers.com/showpost.php?p=57580889&postcount=1
adb reboot bootloader
fastboot flash recovery openrecovery-twrp-2.8.1.0-hammerhead.img
Paul22000 said:
Worked for me. What a hassle!
Here is a summary of the process for those looking for a less wordy procedure, with a few added steps:
1. Download Nexus 5 5.0 (LRX21O) file (note: NOT 5.0.1 yet) https://developers.google.com/android/nexus/images
2. Unzip via 7-zip multiple times in order to get boot.img, recovery.img, system.img
3. Enable USB debugging: http://www.kingoapp.com/root-tutorials/how-to-enable-usb-debugging-mode-on-android-5-lollipop.htm
4. Plug phone into PC > cmd prompt where adb is installed > type "adb devices" to ensure connection is valid (will need to authorize via popup on phone > then "adb devices" should return your device id and "device"; if it says "unauthorized" then look for the popup on your phone)
5. adb reboot bootloader
6. Put system.img, recovery.img, and boot.img in same folder as fastboot.exe
7. Run commands:
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash boot boot.img
8. Use Volume Up/Down to select Start > press Power Button to reboot
9. Update via Settings > About Phone > System Update
Click to expand...
Click to collapse
Maybe you could add `fastboot erase cache` as stepp 8.
gee2012 said:
Maybe you could add `fastboot erase cache` as stepp 8.
Click to expand...
Click to collapse
I added it to step 7, thanks. :good: I also cleaned up the formatting and added step 10 about re-flashing TWRP.
Loading problem
I flashed system, recovery & boot images strictly following the instructions, restarted the phone. It got stuck in loading where balls in four colors keep running for half an hour. Shall I keep waiting? I think there must be something wrong. Your advises are welcome.
guangy said:
I flashed system, recovery & boot images strictly following the instructions, restarted the phone. It got stuck in loading where balls in four colors keep running for half an hour. Shall I keep waiting? I think there must be something wrong. Your advises are welcome.
Click to expand...
Click to collapse
Try flash the partitions again. If it's still not working, you may need to reflash a factory image.
RunasSudo said:
Try flash the partitions again. If it's still not working, you may need to reflash a factory image.
Click to expand...
Click to collapse
I flashed the cache image as well, then the problem solved. Thanks
Related
Now that the bootloader is unlocked, everyone is asking "WTF do I do now?". Well, here's a bit of help to get you started. I'm assuming you already have adb and fastboot setup and working -- if not, quit reading and get that taken care of. Also, I only run Linux...so I'll try to be transparent and only list the fastboot commands.
I assume that you're not a complete moron and can Google what you don't understand.
Don't use the stock\SDK fastboot binary for flashing /system.
An updated fastboot binary for Lin\Win\Mac can be found here on the Batakang FTP from our local, neighborhood Mattlgroff.
Linux -- Rename the file to moto-fastboot and add it to a directory in your $PATH -- Ubuntu\Debian users can just add it to ~/bin (enabled by default)
Windows -- Rename the file to moto-fastboot and put it somewhere handy...that's on you to decide.
ROOT\ADMINISTRATOR INFO
On Linux, you might have to run as root in order to run some of the fastboot commands. If your system uses sudo for root commands, typing "sudo -i" will bring up an interactive sudo shell so you don't have to type sudo over and over again. If your system uses su for root, well, you already know the command.
On Windows, you have to enable Administrator Privileges to be able to run some of the fastboot commands.
Linux Terminal Hints
~/ means your home directory -- example -- "gedit ~/Documents/file.txt" would open file.txt in gedit easier than /home/yourusername/Documents/file.txt
You can add a * to file names and directories to not type as much -- example -- "gedit ~/Doc*/file.txt" is the same as the command above, only shortened. If two files have similar names, like Documents and Downloads, then you have to type the name up until the firs different character then add *.
Use the command "../" to go up\back one directory. The command is stackable so "../../" would go back 2 directories and so forth and so on.
Use "cd" to change directories. Is an example really needed for this...
Proper Apps to Use
For zip file editing, use 7-zip on Windows and Archive Manager (file-roller) on Linux
For editing text files on Windows use Notepad++ or any text editor that has unix line breaks -- do not use default Notepad or Wordpad -- you've been warned. Use what ever you prefer on Linux. I prefer Gedit myself.
Basic Fastboot Command Syntax
fastboot flash "partition" "image" -- flashes partition image where partition is where to write to and image is the path to the image being written.
example -- fastboot flash system /path/to/system.img
fastboot -w -- does a factory reset; to expedite things, "-w" can be added to "fastboot flash system system.img -w"
fastboot continue -- continue with the boot process
fastboot devices -- list devices fastboot recoginzes
fastboot -s "device model number" -- set the device fastboot will write commands to; use "fastboot devices" to find model number
fastboot reboot bootloader -- reboot phone into fastboot mode (or restart fastboot mode while in fastboot); same as "adb reboot bootloader"
fastboot help -- list all of this & more
Command Info
Not all the fastboot commands work for us. Specifically, the "erase" commands. If a wipe command doesn't work, skip it. I'll mark them with a ! at the end if it might fail.
Install CWM Recovery by Epinter
Read Epinter's RAZR HD CWM Thread
Download the recovery image
On stock rom, navigate to /system/etc and rename install-recovery.sh to install-recovery.sh.bak
Reboot into fastboot -- use "adb reboot bootloader" from Terminal\Command Prompt
Wipe the existing recovery -- "fastboot erase recovery" !
Flash the recovery with "fastboot flash recovery cwmrecovery6028-xt925_20130219-epinter.img"
That's it, CWM is installed.
Install Stock Fastboots JB
Download the respective fastboot zip you want to use
Extract the zip
Open a terminal to the extracted zips directory
Reboot into fastboot
Type the following commands in this order
fastboot flash boot boot.img
fastboot flash devtree device_tree.bin
fastboot erase system -w !
fastboot flash system system.img
fastboot -w
fastboot erase cache !
fastboot reboot
Install Stock Fastboots ICS
Download the respective fastboot zip you want to use
Extract the zip
Open a terminal to the extracted zips directory
Reboot into fastboot
Type the following commands in this order
fastboot flash boot boot.img
fastboot flash devtree device_tree.bin
fastboot erase system -w !
fastboot flash system system.img.ext4
fastboot erase cache !
fastboot -w
fastboot reboot
Install Alternate Radio
Reboot into fastboot
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
NON-HLOS.bin is found inside a fastboot zip.
Easy Kernel Install
Download kernel-flash.zip in the attachments[/URL]
Open the zip
Replace the zips current boot.img and device_tree.bin from the fastboot of your choice
Install the zip with CWM
By default, kernel-flash.zip comes with Mex Retail kernel and devtree
Easy CWM Install
Download recovery-flash.zip in the attachments[/URL]
Install the zip with CWM
Not sure if its SS compatible, but it is CWM compatible (for the lazy Photon Q users).
Obtain root after installing a Stock Firmware
There are two choices for obtaining root after a stock flash. the closed source SuperSu by Chainfire & and the open source Superuser by Koush.
Download SuperSu zip from Chainfire (Closed Source)
Download Superuser from Koush (Open Source)
Download the one of the root zips above.
Reboot into CWM/TWRP -- adb reboot recovery
Locate and flash the zip (see below for an alternative way)
Reboot, that's it. Nice not having to run exploits\hacks\Linux just for root
Install Rom/Zip file with ADB + CWM
CWM has the awesome ability to install zip files without having to manually copy them to the phone first. All's necessary is a PC with working adb.
Reboot into recovery
Select "install zip from sideload"
On PC, type "adb sideload /path/to/zip" and press enter
The zip will now be copied to the phone's cache & install
Once installed, do any requirements you'd normally do like wipe caches, etc
I have done this numerous times and it still will not boot into recovery. I have read and followed epinter, yours, official cwm, and other various Google found instructions (none of them functionally different) and still the same result. It recognizes the phone, writes, completes, then if I reboot and select recovery it goes to the android with the open chest cover with the exclamation point....
Any ideas how I could be screwing this up?
Sent from my MB886 using Tapatalk 2
miketravis said:
I have done this numerous times and it still will not boot into recovery. I have read and followed epinter, yours, official cwm, and other various Google found instructions (none of them functionally different) and still the same result. It recognizes the phone, writes, completes, then if I reboot and select recovery it goes to the android with the open chest cover with the exclamation point....
Any ideas how I could be screwing this up?
Sent from my MB886 using Tapatalk 2
Click to expand...
Click to collapse
Unless you're not rooted with an unlocked BL, there's really no reason why it shouldn't work?
Sent from my N4'd Atrix HD
I was rooted before unlocking... shouldn't it still be rooted?
Sent from my MB886 using Tapatalk 2
miketravis said:
I have done this numerous times and it still will not boot into recovery. I have read and followed epinter, yours, official cwm, and other various Google found instructions (none of them functionally different) and still the same result. It recognizes the phone, writes, completes, then if I reboot and select recovery it goes to the android with the open chest cover with the exclamation point....
Any ideas how I could be screwing this up?
Sent from my MB886 using Tapatalk 2
Click to expand...
Click to collapse
Did you uninstall safestrap?
Yep. Should I reinstall it and try again?
Sent from my MB886 using Tapatalk 2
---------- Post added at 01:40 PM ---------- Previous post was at 01:30 PM ----------
reinstalled safestrap and tried again, success!!
Not sure why that made a difference but I got it so thank you very much.
miketravis said:
Yep. Should I reinstall it and try again?
Sent from my MB886 using Tapatalk 2
---------- Post added at 01:40 PM ---------- Previous post was at 01:30 PM ----------
reinstalled safestrap and tried again, success!!
Not sure why that made a difference but I got it so thank you very much.
Click to expand...
Click to collapse
Still did not work for me
Did you install recovery inside safestrap? Then fastboot cwm?
Sent from my MB886 using Tapatalk 2
miketravis said:
Did you install recovery inside safestrap? Then fastboot cwm?
Sent from my MB886 using Tapatalk 2
Click to expand...
Click to collapse
Yes, I did. After fastboot, I followed the OP instructions to uninstalling the SS recovery and SS app. Boot into recovery and got the open android.
tvd0405 said:
Yes, I did. After fastboot, I followed the OP instructions to uninstalling the SS recovery and SS app. Boot into recovery and got the open android.
Click to expand...
Click to collapse
same here.
I have the same problem. I was able to flash cwm, uninstall the SS recovery, and uninstall the app. The first time I got the dead android symbol. I restored SS via Titanium Backup, reinstalled the SS recovery, and flashed cwm again. I tried rebooting into recovery and was able to get cwm working. As soon I uninstalled SS and rebooted, I got another dead android.
probably because were all on the XT926 if we were to revert back to XT925 then the recovery should work otherwise we will have to tweak the recovery to get it to work properly witht the XT926 software awesome thing is we can now free up the space that SS used for a rom slot however for noobs you might wana stick with SS once you hardbrick without anything to go back too it will be game over for your phone and then you have to con ATT for another
i got it.....
i was on ICS 404 bootloader unlcoked and rooted
how the hek you go on bootloader menu (power vol.down???????)
right now im accessing evything with boot widget from play market....
everything works i backed up my stock rom.....
can i try a jellybean rom????? and go back to ICS as many times i want???? from cwm recovery???
thanx
htchd2fix said:
i got it.....
i was on ICS 404 bootloader unlcoked and rooted
how the hek you go on bootloader menu (power vol.down???????)
right now im accessing evything with boot widget from play market....
everything works i backed up my stock rom.....
can i try a jellybean rom????? and go back to ICS as many times i want???? from cwm recovery???
thanx
Click to expand...
Click to collapse
From Phone Off, Hold Power and Both Volumes.
If the phone is on, do the above and when the screen goes black, press them all again...I've been doing that for an hour now
I installed MR via fastboot and just now got it booting. I made the mistake of using the SDK fastboot to flash /system.
skeevy420 said:
From Phone Off, Hold Power and Both Volumes.
If the phone is on, do the above and when the screen goes black, press them all again...I've been doing that for an hour now
I installed MR via fastboot and just now got it booting. I made the mistake of using the SDK fastboot to flash /system.
Click to expand...
Click to collapse
What's MR?
yes it works.....thanx
i was used to powr vol.down with atrix4g
ok..now can i install any rom and if dont like it go back to may backup????
still a little scared.....
i mean i wont loose root right?
Markyzz said:
What's MR?
Click to expand...
Click to collapse
Mexican Retail
Install instructions in OP
htchd2fix said:
yes it works.....thanx
i was used to powr vol.down with atrix4g
ok..now can i install any rom and if dont like it go back to may backup????
still a little scared.....
i mean i wont loose root right?
Click to expand...
Click to collapse
You won't lose root
And with an unlocked bootloader, all you gotta do is flash an updater zip with the su binary and app for Stock roms that don't have root
I'll link to a root zip in the op once I find one (or just make it; depends on how quick I find it in a search)
thanx again..
ahahahha...what a beautifullll day....
skeevy420 said:
Mexican Retail
Install instructions in OP
Click to expand...
Click to collapse
is there a point to flash a different firmware? is it required by any means?
I had SS and was backed up, I booted up the "stock ROM" and was successful in unlocking the BL and flashing CWM. I made a new backup of the stock ROM and restored it with success in CWM. In the video it show he has MR , but im confused as to why.
Also, I cant seem to get rid of safestrap....how in the hell do you uninstall it???
This is the well-established way to flash factory images without waiting for the OTA, using a Windows computer.
You can have a custom recovery, but you must otherwise be stock.
Your bootloader must be unlocked.
You should not lose apps (except for non-stock system apps) or data, but don't hold me responsible if you do.
You will have to reload non-stock system apps like Xposed framework (in fact, I uninstalled the Xposed framework using the Xposed framework installer before starting this process).
This is a modification of the process explained here, which I have mostly cut-and-pasted:
http://forum.xda-developers.com/nexus-4/general/flash-android-4-3-build-clean-flash-t2376681
(Credit to mc704.)
1. You must have ADB, fastboot, and USB drivers for the N4 on your PC. Not hard to find; the thread referenced above tells you one way to get them. Put adb.exe, fastboot.exe, AdbWinApi.dll, and AdbWinUsbApi.dll in a folder on your PC - let's call it C:\N4Update
2. Enable USB Debugging via Developer settings on your phone.
3. The Nexus 4 (mako) 4.4.3 image can be obtained from Google
Image Link: https://developers.google.com/android/nexus/images#occamktu84l
Step 1: Use 7zip or an equivalent compression program to extract the stock 4.4.3 image file that has extension .TGZ
Step 2: You should see a stock image file that has extension .TAR...extract this once again with 7zip (or equivalent) into C:\N4Update
Step 3: Plug your device into the PC (USB debugging should be enabled)
Step 4: Launch command prompt from C:\N4Update, or alternatively start a command prompt (start --> run --> "cmd") and cd to it (cd C:\N4Update)
Step 5: Verify that the PC is detecting your device by typing in command prompt "adb devices" (you should see a code representing your device, and then "device" following it); if not, recheck usb debugging, and unplug and replug the phone back into your PC
Step 6: Turn your N4 off and go into fastboot (bootloader) mode (hold power button + Volume Up & Down all together)
Step 7: Type in the command prompt each step one at a time and wait for it to complete (obviously, don't enter the quotation marks):
"fastboot flash bootloader bootloader-mako-makoz30d.img"
"fastboot reboot-bootloader"
"fastboot flash radio radio-mako-m9615a-cefwmazm-2.0.1701.02.img"
"fastboot reboot-bootloader"
"fastboot update image-occam-ktu84l.zip"
Step 8: At this point, your N4 will reboot. This will take some time as your apps are re-initialized, but it should be clear what's going on.
Step 9: You will now have 4.4.3. You will be unrooted and have stock recovery. If you want, you can stop here.
If you want to install the TWRP custom recovery and regain root:
Step 10: Download the new version of SuperSU onto the N4 from here: http://download.chainfire.eu/446/SuperSU/UPDATE-SuperSU-v1.99r3.zip
Step 11: Download TWRP onto your PC in C:\N4Update from here: http://techerrata.com/file/twrp2/mako/openrecovery-twrp-2.7.0.0-mako.img
Step 12: Boot N4 back into fastboot (bootloader) mode while connected to the PC.
Step 13: With the command prompt from Step 4 above, type "fastboot flash recovery openrecovery-twrp-2.7.0.0-mako.img"
Step 14: Boot from the bootloader into Recovery by pressing volume up to display "Recovery" and then the power button to select.
Step 15: Use TWRP to install the zip (SuperSU) file from Step 10 to regain root.
Step 16: Reboot system.
You should now have a rooted system, with all of your old apps and data (except for system apps, which need to be reinstalled), and the latest TWRP custom recovery.
Don't wanna sound rude, but is there point in creating another how-to thread, along the other threads which some(link) are even mentioned in sticky roll-up threads? Plus it's 99% copy/paste, which you even mention so that's nice from you.
It's nice that someone have will to write(or even copy/paste/edit) tutorials, but by having more threads help is harder to find(search).
Just my humble opinion and experience
Also you can jsut remove the recovery img from the update package to keep your custom recovery
well I for one appreciate you posting this as now I don't have to search all over gods creation to find the old thread
Nevermind
i did all steps... but im spammed google now launcher has stopped
will factory reset help?
Night5talker said:
i did all steps... but im spammed google now launcher has stopped
will factory reset help?
Click to expand...
Click to collapse
Factory reset seems extreme. How about just uninstalling and reinstalling the launcher? (I assume the stock launcher still works.)
NYZack said:
Factory reset seems extreme. How about just uninstalling and reinstalling the launcher? (I assume the stock launcher still works.)
Click to expand...
Click to collapse
i did factory reset but apps did left on my phone storage and when i turned it on google play started to download it everything again
ps couldnt do anything it was poping right back up wheni press ok even if i go to another launcher
Night5talker said:
i did factory reset but apps did left on my phone storage and when i turned it on google play started to download it everything again
ps couldnt do anything it was poping right back up wheni press ok even if i go to another launcher
Click to expand...
Click to collapse
Well, sorry, don't quite understand: you could always just uninstall the Google Now launcher, make sure everything else is working, and then reinstall it once you confirm there's no other problem.
Anyone could just mention the procedure for doing same thing but through Wug toolkit.
In general I prefer to avoid fastboot commands and flash everything though pc.
Unleashed by my Nexus 4
No need to do all these steps (flashboot). They included scripts that will run all things
On Windows you can just run "flash-all.bat" or on Unix "flash-all.sh".
DarsVaeda said:
No need to do all these steps (flashboot). They included scripts that will run all things
On Windows you can just run "flash-all.bat" or on Unix "flash-all.sh".
Click to expand...
Click to collapse
Yeah but edit it with notepad and remove the -w flag to disable the wipe also remove the recovery.img from the zip to keep the custom recovery !
mashedbymachines said:
Yeah but edit it with notepad and remove the -w flag to disable the wipe also remove the recovery.img from the zip to keep the custom recovery !
Click to expand...
Click to collapse
Yeah, this is the key point - if that -w flag is not removed, you will lose all apps/data. One of the reasons I put this up is that I think the step-by-step method is interesting, instructive (you can see what's actually happening), not much more time-consuming than running the automated script, and lets you have more granular control.
(And I apologize if it's littering the forum and semi-plagiarism, but I thought a very detailed, confirmed step-by-step guide with up-to-date precise download links might be useful to people who haven't gone through the process before.)
What the ....
So I edited my flash-all.bat and removed the -w
It looks like this:
@ECHO OFF
PATH=%PATH%;"%SYSTEMROOT%\System32"
fastboot flash bootloader bootloader-mako-makoz30d.img
fastboot reboot-bootloader
ping -n 5 127.0.0.1 >nul
fastboot flash radio radio-mako-m9615a-cefwmazm-2.0.1701.02.img
fastboot reboot-bootloader
ping -n 5 127.0.0.1 >nul
fastboot update image-occam-ktu84l.zip
echo Press any key to exit...
pause >nul
Click to expand...
Click to collapse
And yet my phone was wiped.... sigh
** Update **
Nevermind, it was Notepad++ that screwed me over. The changes to the bat file was not written to the file, only kept in Notepad++'s temporary memory. ****ing bull**** feature.
Erroneus said:
What the ....
So I edited my flash-all.bat and removed the -w
It looks like this:
And yet my phone was wiped.... sigh
** Update **
Nevermind, it was Notepad++ that screwed me over. The changes to the bat file was not written to the file, only kept in Notepad++'s temporary memory. ****ing bull**** feature.
Click to expand...
Click to collapse
so in order to run this comand you only need to unzip the tar(?) file downloaded and then you are done, you don't have to unzip the actual factory image, correct?
fdg59 said:
so in order to run this comand you only need to unzip the tar(?) file downloaded and then you are done, you don't have to unzip the actual factory image, correct?
Click to expand...
Click to collapse
Actually, you have to run the unzip program twice:
For example, when updating to Android version 4.4.4 (Yes, a new version has already been released since this post):
Here is the downloaded file
occam-ktu84p-factory-b6ac3ad6.tar
Unzipping it will give you this:
occam-ktu84p-factory-b6ac3ad6
And unzipping that one more time will give you the directory "occam-ktu84p" containing the following files:
bootloader-mako-makoz30d.img
flash-all.bat
flash-all.sh
flash-base.sh
image-occam-ktu84p.zip
radio-mako-m9615a-cefwmazm-2.0.1701.03.img
WARNING: As was mentioned many times, remove the -w from the following line in the flash-all.bat file unless you intend to wipe your phone clean. I don't understand the issue with Notepad++ noted in a previous post, as you have to hit "save" like any other program (It is the program that I use as well).
fastboot -w update image-occam-ktu84p.zip
If what you were really asking is whether you need to unzip the file image-occam-ktu84p.zip.......The answer is no.
ah ah yes 4.4.4, that's why i am asking, because i always used to unzip everything and the flash items individually using fastboot which i always liked. The problem however was that my nexus 4 has 16gb and after flashing and wiping everything clean the memory showed up at 8gb so i had to factory reset through stock recovery which i didn't enjoy as much. thanks for all the help!
Disclaimer: If you are not comfortable with using Fastboot and ADB and editing system files than this guide might not be for you. At this point this is what I have to offer.
Click here for the unofficial twrp image - Latest version as of 12/27/14
So getting right into it.
1. Turn on ADB mode on the watch by going to about and tapping the build info 7 times.
2. Download ADB and Fastboot utilties
3. Plug the watch into the computer and your phone should vibrate and ask you to accept the computers fingerprint, tick the check box to always allow and hit ok
4. Open up a command prompt or terminal inside of where the ADB utilities are located and enter
Code:
adb reboot bootloader
This next step will wipe your data!
5. Now you should be in fastboot, go ahead and on the terminal use the next code and follow prompts to unlock
Code:
fastboot oem unlock
6. Now after you re-set up your watch again you will need to do step 1 and 3 again.
Please do not skip step 6!
7. Go ahead and issue
Code:
adb reboot bootloader
8. Flash unofficial twrp, make sure the recovery image file is in the same location as fastboot than issue
Code:
fastboot flash recovery YOURIMGNAMEHERE.img
9. Upon successfully doing that you should have twrp installed
10. Lots in one step here, download the latest supersu.zip flashable file and put it in the same folder as ADB use the proper name of what you downloaded. Issue
Code:
adb push SUPERSUNAMEHERE.zip /sdcard/
11. Issue
Code:
adb reboot recovery
12. than using the very tiny TWRP and somewhat messed up go ahead and use it to install the supersu.zip under the folder /sdcard
13. Enjoy root and twrp.
I will make this guide into a much easier Java program in the very near future to make it easier to use.
This was typed up pretty fast and it is kinda hacky, I will work on a bat script and a shell script if we have enough osx users here. I'm sure someone will come along and make this better if I don't get around to it.
Credits:
Dees-Troy for his TWRP support for dory our fish brother device which worked on our device
Chainfire for all his hard work these many years
Q: ADB complains there is no device listed.
A: Install universal ADB drivers and then go to device manager and under the device with a yellow warning icon go to update driver, Browse my computer, let me pick from list of device drivers, than Google ADB interface. If it still complains turn off debugging, than turn it back on, revoke authorization, then disable and re-enable again.
One more just in case.
Great work!!
Just got the watch today and couldn't be happier. Custom kernel, TWRP and root (well sort of) all within 6 hours of having this watch.
I say root (sort of) because SU is force closing when running su in adb shell. First time it crashed adb on PC and had to reboot watch. Now it just force closes on my watch and adb exits on PC. What is the most current version of SuperSU? I have 1.94 from Chainfire's site.
Thank you SO MUCH for this! Do you or your team have a paypal?
hatefuel19 said:
Just got the watch today and couldn't be happier. Custom kernel, TWRP and root (well sort of) all within 6 hours of having this watch.
I say root (sort of) because SU is force closing when running su in adb shell. First time it crashed adb on PC and had to reboot watch. Now it just force closes on my watch and adb exits on PC. What is the most current version of SuperSU? I have 1.94 from Chainfire's site.
Thank you SO MUCH for this! Do you or your team have a paypal?
Click to expand...
Click to collapse
The latest supersu is version 2.36 dated 11.27.2014. 1.94 is well over a year old, you need to update for sure that is why you are force closing.
I figured that's what it was. Feeel real dumb for not finding the newest version the first time. Also most current is now 2.37 XD
Edit: That got it! Thanks tonu!
hatefuel19 said:
I figured that's what it was. Feeel real dumb for not finding the newest version the first time. Also most current is now 2.37 XD
Edit: That got it! Thanks tonu!
Click to expand...
Click to collapse
I'm here to help! I'm working on adding other mods to my other thread right now I'm working on getting busybox working.
Thanks for doing all of this work.
I was hoping you could help me with a step I am stuck on.
10. Lots in one step here, download the latest supersu.zip flashable file and put it in the same folder as ADB. Issue "adb push SUPERSUNAMEHERE.zip /sdcard/
When I do this it is saying permission denied. Also, should the watch be in recovery or fully booted when I run this command?
Thanks
---------- Post added at 09:31 PM ---------- Previous post was at 09:28 PM ----------
jimmydigital00 said:
Thanks for doing all of this work.
I was hoping you could help me with a step I am stuck on.
10. Lots in one step here, download the latest supersu.zip flashable file and put it in the same folder as ADB. Issue "adb push SUPERSUNAMEHERE.zip /sdcard/
When I do this it is saying permission denied. Also, should the watch be in recovery or fully booted when I run this command?
Thanks
Click to expand...
Click to collapse
Disregard I did it again and for some reason it worked. Maybe I need to reboot first.
Recovery
I went through your command and everything worked until I ran:
fastboot flash recovery UNOFFICIAL-openrecovery-twrp-2.8.0.0-lenok.img
Now the device just boots into the recovery and not into the system. The system/data partitions keep saying:
E:Unable to mount /data
E:Unable to mount /system
I am very comfortable with fastboot and adb so I do not know what I did wrong here.
Any ideas?
adamrobles said:
I went through your command and everything worked until I ran:
fastboot flash recovery UNOFFICIAL-openrecovery-twrp-2.8.0.0-lenok.img
Now the device just boots into the recovery and not into the system. The system/data partitions keep saying:
E:Unable to mount /data
E:Unable to mount /system
I am very comfortable with fastboot and adb so I do not know what I did wrong here.
Any ideas?
Click to expand...
Click to collapse
Try reflashing the recovery IMG again. And check back here.
Sent from my A0001 using XDA Free mobile app
reflashed
tonu42 said:
Try reflashing the recovery IMG again. And check back here.
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
I reflashed the recovery you provided and I keep rebooting to system but it takes me to twrp.
I am in the process of downloading the system dump from another thread to hopefully flash those to get back into the system.
adamrobles said:
I reflashed the recovery you provided and I keep rebooting to system but it takes me to twrp.
I am in the process of downloading the system dump from another thread to hopefully flash those to get back into the system.
Click to expand...
Click to collapse
The dump is extracted from the system.img, you won't be able to flash it in any way. None of this guide touches system files besides the root stuff which shouldn't affect boot. Try flashing the stock recovery.img instead.
tonu42 said:
The dump is extracted from the system.img, you won't be able to flash it in any way. None of this guide touches system files besides the root stuff which shouldn't affect boot. Try flashing the stock recovery.img instead.
Click to expand...
Click to collapse
Thank you for that information, I stopped the download of the dump.
Downloading the stock recovery now.
---------- Post added at 02:24 PM ---------- Previous post was at 02:10 PM ----------
tonu42 said:
The dump is extracted from the system.img, you won't be able to flash it in any way. None of this guide touches system files besides the root stuff which shouldn't affect boot. Try flashing the stock recovery.img instead.
Click to expand...
Click to collapse
I must have skipped a step...
installed stock recovery
booted into the watch system
enabled adb debugging
reboot to bootloader
install your recovery image
rebooted
pushed supersu
rebooted to twrp
installed supersu
rebooted to system
adb shell - verified root!
You are awesome! Thank you for taking the time to help me!
HYPE for 5.0.1
'm Hype! can't wait to flash the first 5.0.1 system dump on this as stated by +Darek Ross we MAY be receiving update as early as today!
I did this yesterday, and run into the same problem - TWRP spitting out errors when flashing
It was caused by NOT rebooting after unlocking bootloader, but proceeding with the flash rightaway - this apparently leaves the watch in an empty state (no /sdcard or /system contents) and it needs to boot up at least once before you flash anything
So the correct procedure is like this
1) enable development options
2) enable usb debugging
3) adb reboot-bootloader
4) fastboot oem unlock
5) let the watch boot normally, pair with your phone, enable development options and usb debugging again
6) adb reboot-bootloader
7) fastboot flash recovery recovery.img
8) fastboot reboot
9) adb push supersu.zip /sdcard/
10) adb reboot recovery
11) flash supersu.zip
Apparently, there is a problem when the original kernel is not present after "fastboot oem unlock" - the watch will be left empty, while on the original kernel it "reinstalls"
I typed this from memory, but I think you should know how these things work anyway, as there's not much for a "normal" user to do anyway... yet...
zvieratko said:
I did this yesterday, and run into the same problem - TWRP spitting out errors when flashing
It was caused by NOT rebooting after unlocking bootloader, but proceeding with the flash rightaway - this apparently leaves the watch in an empty state (no /sdcard or /system contents) and it needs to boot up at least once before you flash anything
So the correct procedure is like this
1) enable development options
2) enable usb debugging
3) adb reboot-bootloader
4) fastboot oem unlock
5) let the watch boot normally, pair with your phone, enable development options and usb debugging again
6) adb reboot-bootloader
7) fastboot flash recovery recovery.img
8) fastboot reboot
9) adb push supersu.zip /sdcard/
10) adb reboot recovery
11) flash supersu.zip
Apparently, there is a problem when the original kernel is not present after "fastboot oem unlock" - the watch will be left empty, while on the original kernel it "reinstalls"
I typed this from memory, but I think you should know how these things work anyway, as there's not much for a "normal" user to do anyway... yet...
Click to expand...
Click to collapse
My guide is setup like the one you put there. In order to get adb working again you need to re setup the watch step 6. Read the instructions carefully. I'll post a batch script later to simplify this.
Sent from my A0001 using XDA Free mobile app
Step 6 doesn't really say "you need to do this, OR ELSE", it seems like you just rehash the factory reset thing
And you should put step 10 before step 6, it can't really be done in that order...
but again, I guess the people trying this should now how it works, so no biggie, but since a few of us got hit by that "no initial boot" issue, it would be better to put a note in there
zvieratko said:
Step 6 doesn't really say "you need to do this, OR ELSE", it seems like you just rehash the factory reset thing
And you should put step 10 before step 6, it can't really be done in that order...
but again, I guess the people trying this should now how it works, so no biggie, but since a few of us got hit by that "no initial boot" issue, it would be better to put a note in there
Click to expand...
Click to collapse
By default debugging is disabled, I'm not sure how you were able to issue an ADB command on step 7 with out first performing step 6.
Aaah, sorry, should have been "after step 6"
another option is to do adb push with recovery loaded
I guess that's why I got that error before, because I combined 5+8 and flashed the recovery, but TWRP was unable to revive the watch from factory reset state (which makes me think it should not be on the watch unless needed...)
zvieratko said:
Aaah, sorry, should have been "after step 6"
another option is to do adb push with recovery loaded
I guess that's why I got that error before, because I combined 5+8 and flashed the recovery, but TWRP was unable to revive the watch from factory reset state (which makes me think it should not be on the watch unless needed...)
Click to expand...
Click to collapse
Ah I see, yea the guide is written as the absolute minimum to work right now. Like I said later today I'll try to post a script that automates all of this, its much easier.
Hey,
I enrolled to the Android Nougat program and rooted my phone (chainfire) a few days ago. Decided to un-root (using superSU), and it said I was unrooted. After doing the un-rooting, the OEM unlock-option was greyed out (and on OFF setting), but the phone recovery says it's unlocked api 3.... I pretty much just wanted to unenroll and go back to MM. Every time I choose unroll from Google, download the MM OTA and it reboots I get an error. Just an image of android with message "ERROR". The only way to get the phone working is to do a hard reset and go back to Nougat.
Not quite sure what is wrong here. Any suggestions?
It's probably because the SuperSU unroot hasn't cleaned up everything that the MM installer checks for. Your best bet is to use the sideload OTA here:
https://developers.google.com/android/nexus/ota
to install MM again. It's quick and easy, and doesn't touch your data.
Since you received the actual uninstall OTA you must have successfully unenrolled, so you should be ok from now on.
dahawthorne said:
It's probably because the SuperSU unroot hasn't cleaned up everything that the MM installer checks for. Your best bet is to use the sideload OTA here:
https://developers.google.com/android/nexus/ota
to install MM again. It's quick and easy, and doesn't touch your data.
Since you received the actual uninstall OTA you must have successfully unenrolled, so you should be ok from now on.
Click to expand...
Click to collapse
I received the OTA but while installing MM it gives me an error, so I have to go back to Nougat every time. I've tried the unenroll option several times and it gives me the same "error" every time. So, I should try manually flashing MM, then?
UPDATE:
I tried the following:
Downloaded and tried to sideload 6.0.1 (MOB30W) to my Nexus 6-device. It got up to 46% and after it gave me and error saying:
WARNING: No file_contexts. This package is for shamu devices; this is a "".
E: Error in /sideload/package.zip
Status 7
Installation aborted.
UPDATE2:
Tried another package. Didn't work. All the OTA updates stop at 46% giving me the same error. Device remains unlocked, but appears not to be rooted. Still stuck on Nougat.
What does "Tried another package" mean?
It may be that your download was corrupt. I always check the SHA with this checksum utility:
http://download.cnet.com/MD5-SHA-Checksum-Utility/3000-2092_4-10911445.html
though I've read in the instructions that the Android installation itself checks the package - it may be this error that the installation is reporting.
dahawthorne said:
What does "Tried another package" mean?
It may be that your download was corrupt. I always check the SHA with this checksum utility:
http://download.cnet.com/MD5-SHA-Checksum-Utility/3000-2092_4-10911445.html
though I've read in the instructions that the Android installation itself checks the package - it may be this error that the installation is reporting.
Click to expand...
Click to collapse
No, the checksum is fine. The package is fine. I mean I tried several OTA packages for N6 and it always stops at 46%. There's something else going on here. Maybe if I re-root with chainfire and the use another method to unroot it? Which is the correct method, I have no idea?
Factory reset, and try sideloading MOB30W again.
dahawthorne said:
Factory reset, and try sideloading MOB30W again.
Click to expand...
Click to collapse
Done it like 5 times already. Also wiped cache. No help.
Hannes084 said:
Done it like 5 times already. Also wiped cache. No help.
Click to expand...
Click to collapse
My suggestion is to go back to Android N, root with SuperSU and see if your OEM UNLOCK toggle in Developer Options is working again and not greyed out. Then I would fastboot flash back to MM and install TWRP and SuperSu.
Sent from my Nexus 6 using XDA-Developers mobile app
Dude, just flash the system image you want. Forget about the OTA
The OTA is a system image.
fast69mopar said:
My suggestion is to go back to Android N, root with SuperSU and see if your OEM UNLOCK toggle in Developer Options is working again and not greyed out. Then I would fastboot flash back to MM and install TWRP and SuperSu.
Sent from my Nexus 6 using XDA-Developers mobile app
Click to expand...
Click to collapse
Root with SuperSU? I think you mean with chainfire?
dahawthorne said:
The OTA is a system image.
Click to expand...
Click to collapse
You could say the new full otas are, but you can't go flashing them freely over newer images.
The unenroll option resets the phone anyways, so the best and aparently the only option for him is to flash the system image he wants from scratch.
blanco2701 said:
You could say the new full otas are, but you can't go flashing them freely over newer images.
The unenroll option resets the phone anyways, so the best and aparently the only option for him is to flash the system image he wants from scratch.
Click to expand...
Click to collapse
Sorry for asking but how would I even do that? I'm on Ubuntu 12, so it seems mega complicated.
Hannes084 said:
Sorry for asking but how would I even do that? I'm on Ubuntu 12, so it seems mega complicated.
Click to expand...
Click to collapse
Well my friend I have no idea since I'm on Windows. Google how to use adb and fastboot on ubuntu, there should be a solution for you.
This is a script that I used to run before the full OTAs became available. It worked many times for me, but the usual caveat - you follow it at your own risk. You can probably skip the backup step in your situation.
Preparation.
- Take a TWRP backup and save it on your PC.
- Download factory image and unzip all files, including the zip within the zip. Rename the *.img files to the names below. Copy all of them to the same folder as your ADB/fastboot executables.
- Download the relevant TWRP and rename to twrp.img - also put in ADB/fastboot folder.
- Copy SuperSU to device (if root wanted).
- Set USB debugging in Developer options & attach to your PC.
- Open a CMD window and check connectivity with "adb devices". If it's ok, copy & paste each command below into the CMD window and run them - the only lengthy one is the system.img.
1. adb reboot bootloader
2. fastboot flash bootloader bootloader.img
3. fastboot reboot-bootloader
4. fastboot flash radio radio.img
5. fastboot reboot-bootloader
6. fastboot erase system
7. fastboot flash system system.img
8. fastboot erase boot
9. fastboot flash boot boot.img
10. fastboot erase cache
11. fastboot flash cache cache.img
12. fastboot reboot-bootloader
13. fastboot flash recovery twrp.img
14. From bootloader boot to TWRP and reflash superSu
dahawthorne said:
This is a script that I used to run before the full OTAs became available. It worked many times for me, but the usual caveat - you follow it at your own risk. You can probably skip the backup step in your situation.
Preparation.
- Take a TWRP backup and save it on your PC.
- Download factory image and unzip all files, including the zip within the zip. Rename the *.img files to the names below. Copy all of them to the same folder as your ADB/fastboot executables.
- Download the relevant TWRP and rename to twrp.img - also put in ADB/fastboot folder.
- Copy SuperSU to device (if root wanted).
- Set USB debugging in Developer options & attach to your PC.
- Open a CMD window and check connectivity with "adb devices". If it's ok, copy & paste each command below into the CMD window and run them - the only lengthy one is the system.img.
1. adb reboot bootloader
2. fastboot flash bootloader bootloader.img
3. fastboot reboot-bootloader
4. fastboot flash radio radio.img
5. fastboot reboot-bootloader
6. fastboot erase system
7. fastboot flash system system.img
8. fastboot erase boot
9. fastboot flash boot boot.img
10. fastboot erase cache
11. fastboot flash cache cache.img
12. fastboot reboot-bootloader
13. fastboot flash recovery twrp.img
14. From bootloader boot to TWRP and reflash superSu
Click to expand...
Click to collapse
If I download the factory image (OTA) off google's site it has none of those files under the zip-folder.
Hannes084 said:
If I download the factory image (OTA) off google's site it has none of those files under the zip-folder.
Click to expand...
Click to collapse
One thing is the OTA image, and another is the Factory Image.
Download the factory image from here.
https://developers.google.com/android/nexus/images#shamu
Unzip everything and you should get all the files needed. As I said before, you would need to have a computer with adb and fastboot installed.
blanco2701 said:
One thing is the OTA image, and another is the Factory Image.
Download the factory image from here.
https://developers.google.com/android/nexus/images#shamu
Unzip everything and you should get all the files needed. As I said before, you would need to have a computer with adb and fastboot installed.
Click to expand...
Click to collapse
Thanks, doing that now!
Hannes084 said:
Thanks, doing that now!
Click to expand...
Click to collapse
Just be sure to have selected "oem unlocking" in the developer options, make a backup (everything will be wiped), and start flashing!. There are several guides everywhere.
Okay so I got my oneplus 3t today and I updated it to Nougat via the ota file all good so far. I then decided that I wanted to install a custom rom so I downloaded twrp supersu etc everything needed to root and install the rom. Here's where it went wrong in knowingly I downloaded the wrong twrp flashed it and it would just hang at the flash screen for twrp. Anyway after hours of trying to install a recovery I managed to get a stock one to semi work, now it turns out I don't know how I did it but my phone won't even boot it just turns on and goes straight to fastboot mode. I managed to get a stock recovery semi working but it won't let me install the stock rom from internal storage and I've tried updating through adb and it will hang at a random percentage for a good 20 mins and then just fail. Really need some help here it would be great, thanks
Hi,
If you can get into fastboot mode then the best recourse is through there. Hope you properly OEM unlocked your device.
First of all, you MUST have the latest adb/fastboot binaries and FOR SURE have the correct drivers.
Follow the links on this XDA article to download the latest adb and fastboot binaries: https://www.xda-developers.com/google-releases-separate-adb-and-fastboot-binary-downloads
This is the link for the Windows binary: https://dl.google.com/android/repository/platform-tools-latest-windows.zip
Extract all the contents of the zip file in a folder on your PC.
Then, also make sure to have THE CORRECT twrp, 3.0.2.0 or 3.0.3.0. This is the link but currently it is down: https://twrp.me/devices/oneplus3t.html
Download THE IMAGE, NOT FLASHABLE ZIP and put it in the same folder as the android platform tools above.
Finally, download the latest complete 3T firmware from OnePlus from this link: http://downloads.oneplus.net/devices/oneplus-3t/
I STRONGLY recommend not to use an update zip, even a full ROM update zip as that one might not include certain firmware images.
Put THE ZIP on the same folder as the others, DO NOT EXTRACT ANYTHING.
On your PC, open a command prompt in the folder where you extracted the android platform tools and run the following: fastboot boot twrp-3.0.3-0-oneplus3t.img (assuming you downloaded the 3.0.3 version of twrp).
Your phone will TEMPORARILY accept the twrp recovery as a boot image and boot from there. NOTHING IS BEING PERMANENTLY WRITTEN AT THIS TIME.
After that, enter TWRP's Wipe menu and wipe system, data and cache.
Finally, use TWRP's Advanced menu and enter adb sideload mode. Once there slide that slider to the right to enable adb mode and return to your PC and enter the following command in the command prompt:
adb sideload OnePlus3TOxygen_28_OTA_029_all_1612131737_17e7161d2b234949.zip (assuming you downloaded the 3.5.4 binary from OnePlus).
TWRP should properly flash the OnePlus ROM and hopefully, return you to proper function. You can then update back to Nougat.
Hope that helped!
Yeah that sorted it thanks a lot
Use the emergency tool for OP3T and start from scratch:
https://forums.oneplus.net/threads/unbrick-guide-oneplus-3t.481214/
@KeyperOS
I'm trying to follow this guide, but did you miss something out here?
On your PC, open a command prompt in the folder where you extracted the android platform tools and run the following: fastboot boot twrp-3.0.3-0-oneplus3t.img (assuming you downloaded the 3.0.3 version of twrp).
Your phone will TEMPORARILY accept the twrp recovery as a boot image and boot from there. NOTHING IS BEING PERMANENTLY WRITTEN AT THIS TIME.
Click to expand...
Click to collapse
Once I do "fastboot boot twrp" and get a success, then what?
Do I need to somehow reboot the phone into TWRP - because that didn't happen on its own.
If so, how do I do this?
Thanks,
jackmacbunton said:
Yeah that sorted it thanks a lot
Click to expand...
Click to collapse
Glad that sorted it out
PugRallye said:
@KeyperOSI'm trying to follow this guide, but did you miss something out here?
Once I do "fastboot boot twrp" and get a success, then what? Do I need to somehow reboot the phone into TWRP - because that didn't happen on its own. If so, how do I do this? Thanks,
Click to expand...
Click to collapse
My instructions while detailed are not step-by-step. I expect the person reading them to have their PC configured correctly and at least a vague idea of what they're doing.
So, assuming you put the correct TWRP image (my command uses the name of the image for TWRP 3.0.3.0, you MUST alter it to reflect the actual image's filename if it's not that) on the same folder as the fastboot binary then yeah, the command
fastboot boot twrp-3.0.3-0-oneplus3t.img
should have made your phone reboot and enter into the TWRP image that you had on your PC.
If it didn't then you did sth else wrong before that.
Either you didn't OEM unlock your phone when you still could or you didn't use the android platform tools that I linked or you don't have the correct ADB drivers installed on your PC.
Start from there.
Hope that helped!
Thanks for your help @KeyperOS - I know where I went wrong...
To save some time, when I tried to reboot into TWRP, I typed "fastboot boot " then I dragged and dropped the TWRP img file onto that line in the cmd window (rather than typing the filename manually) - when you do that, it appears to include the full path to the img - it was that that was causing the problem.
When I typed the TWRP filename manually, it worked.
The only thing that caught me out was after I'd installed the ROM (via adb sideload) I tried to reboot the device from TWRP recovery - this seemed to just hang. In the end I just powered off the phone using the power key, then powered it back up as per usual.
Checked that the phone booted to the first of the setup screens, then powered off/booted into fastboot mode, relocked the bootloader and it seems to be OK.
I'm now back on 3.5.4 again, which was what I was trying to do...
4.0.0/1 had felt a bit laggy, and I'd sensed some issues with wifi and BT, I can now run 3.5.4 and see how it compares - was I just imagining it?
Thanks again for the guide and your help - I really appreciated it
@PugRallye
Windows' command prompt has an autocomplete feature. If you want it to add the name of a file, type a couple letters and then present TAB, it's gonna complete the filename itself and if it's the wrong file you can keep tapping tab to cycle through all the options.
Really glad it worked out Btw [emoji4]
In my experience, 3.5.4 was great but 4.0 is a step up in both battery life, which IME is amazing and features, with it I almost didn't need root and certainly don't need xposed which was a first.