"Torrent Buddy is a client application which run on windows phone and communicate with your uTorrent client/webserver running on your PC. This is pretty handy to look at the status of your torrents and control them as needed. What’s unique about Torrent Buddy compared to other apps on market place is that it lets you add new torrents from any website and RSS feeds. Not only that, it also allows you to add torrent from sites which require authentication by adding your own cookie information."
The Trial version will support everything except adding new torrents
you can get it from the market place.
I am nothing to do with this app It just taken me ages to get it set up so thought I would help in case anyone else needed it
OK so I thought I would write up a little tutorial on how to set this app up, as the only info i could find was on this site(the creates of the app)
OK so I found the easiest way of doing this guys was like this (my pc is connected via wifi)
1.give yourself a static ip=
start>control panel>network connections>right click you’re wireless connection>properties>
2.on the General Tab there is a box you can scroll down to, got to Internet protocol(TCP/IP)click on it and click properties
3.use the following IP Address example
IP. = 192.168.1.3
subnet = 255.255.255.0
Deafult gateway = (mine was) 192.168.1.1
DNS server (mine was) 192.168.1.1
click ok to save then ok
4. log in to you’re router(mine is Netgear so 192.168.1.1)
5.go to port forwarding
6.create new port forward
Service Name = Torrent Buddy
Service Type = TCP/UDP
Starting Port = chose a port
Ending Port = chose a port
Server IP Address (you’re static address)
save and log out you’re router
7.uTorrent setup – In uTorrent, go to options->Preferences->Web UI, Select “Enable Web UI” check mark. Enter a username and password and keep not of the connectivity port. This is what you will need to connect from torrent buddy (Select the check box and enter the port you chose for port forwarding).
Go to http://portforward.com/ and it will show you you’re IP.
fire up torrent buddy and open connections menu
9.Friendly name = whatever you want
Server name = http://yourIP:the port you chose
username = the same you chose for the settings in Utorrent
Password = as above
save
10.click the connection you created and press the tick box if you did everything ok then it should go back to the main screen and connect and then you can watch you’re torrents.
Hope this helps
请问一下具体怎么设置？ 为什么我的总是提示登陆失败？ 有图片教程？
请问一下具体怎么设置？ 为什么我的总是提示登陆失败？ 有图片教程？ 我 没有路由器？Torrent Buddy is a client application
Phone: Samsung Galaxy Note - NOT ROOTED
1st time using Android
I may be posting similar problem that user may have face, but I tried to search for the same case and i not getting any result.
So my case is explained below
The problem:
I can connect to secured wifi network at my home and other wifi spots without a problem. But I can't connect to my office open wifi network at all. With my ipod touch,blackberry and even old nokia e72, it was a breeze to get internet access at office. After being connected to wifi, I have to go to web browser...then, it should automatically redirect me to Wifi Authentication Login page. It's not happening with my Galaxy Note android devices and is working just fine on my ipod touch.
my android devices would show signal quality as "Excellent". whenever i go to web browser, it doesn't redirect me to authentication page. instead, the connection page would time out.
I 've tried these:
-Clearing Cache.
-Factory resetting.
-Using other browsers, Dolphin,Firefox, etc.
-Apps on Android Market(Wifi Login, Wifi--etc etc.)
Does anybody have this kind of issues??? I think this is a BIG FLAW with Android OS. Need to find a fix if there is one out there
Any takers on this tread? Please do advise if you have the answer
there used to be an authentication based WiFi service in my previous work place and I could easily log in using opera mobile on my galaxy note to first log in and then browse
IAM not sure if this will help
...
try opera mobile instead of stock browser and in settings change your client to desktop
good luck
The solution!!!
Hi everyone! I've almost torn my hair out the last two weeks trying to figure out this problem. and I've found it!
It is a DNS problem.... you need to use OpenDNS or Google DNS and set it manually in your WIFI settings. Then the login page will appear now when you connect and you'll have internet. Here's how:
To change DNS settings and connect to our system from Android 2.3 device you can do following:
1. "Settings"
2. "Wireless and Networks"
3. "Wi-Fi settings"
4. Menu > "Advanced"
5. Use static IP
6. Copy current IP address (few lines above) to IP address field
7. Set Gateway as router IP (usually the same as current IP except last number is .1, i.e. if your phone IP 192.168.2.130 then router's likely 192.168.2.1)
8. Set Netmask 255.255.255.0 (sometimes it's different, but you should already know what to do if it is)
9. Set DNS 1 and DNS 2 fields as per table below (these are Google DNS values):
DNS 1 8.8.8.8
DNS 2 8.8.4.4
10. Menu > "Save"
11. Restart your phone (power cycle).
FOR ICS/Android 4.0 people:
1. Settings
2. WiFi (click on word "WiFi", not ON/OFF switch)
3. Press and hold preferred (or active) wireless network until dialog pops up
4. Select "Modify Network"
5. Check "Show advanced options" checkbox at the bottom
6. Switch "IP settings" to "Static"
7. Keep IP address, Gateway and Network prefix length the same (should be set from standard DHCP)
8. Set DNS 1 and DNS 2 fields as per table above.
9. "Save"
10. Restart your phone (power cycle).
CHEERS. Please spread widely, as this is a big problem for android users and public networks!!
Wow. This is the only thing that has worked for me.
When I changed the IP to static, the IP, gateway, network, and dns were all correct, as in your list. But they were greyed out. So I couldn't hit "save." Then I typed them in (without changing anything), clicked the save button and finally was able to log in. So something is wrong with the way android manages wifi. All the information was there, but android wasn't using it. In addition to changing the IP to static, the information has to be entered manually. Information android already has access to, but won't use for some reason.
dagundam said:
Hi everyone! I've almost torn my hair out the last two weeks trying to figure out this problem. and I've found it!
It is a DNS problem.... you need to use OpenDNS or Google DNS and set it manually in your WIFI settings. Then the login page will appear now when you connect and you'll have internet. Here's how:
To change DNS settings and connect to our system from Android 2.3 device you can do following:
1. "Settings"
2. "Wireless and Networks"
3. "Wi-Fi settings"
4. Menu > "Advanced"
5. Use static IP
6. Copy current IP address (few lines above) to IP address field
7. Set Gateway as router IP (usually the same as current IP except last number is .1, i.e. if your phone IP 192.168.2.130 then router's likely 192.168.2.1)
8. Set Netmask 255.255.255.0 (sometimes it's different, but you should already know what to do if it is)
9. Set DNS 1 and DNS 2 fields as per table below (these are Google DNS values):
DNS 1 8.8.8.8
DNS 2 8.8.4.4
10. Menu > "Save"
11. Restart your phone (power cycle).
FOR ICS/Android 4.0 people:
1. Settings
2. WiFi (click on word "WiFi", not ON/OFF switch)
3. Press and hold preferred (or active) wireless network until dialog pops up
4. Select "Modify Network"
5. Check "Show advanced options" checkbox at the bottom
6. Switch "IP settings" to "Static"
7. Keep IP address, Gateway and Network prefix length the same (should be set from standard DHCP)
8. Set DNS 1 and DNS 2 fields as per table above.
9. "Save"
10. Restart your phone (power cycle).
CHEERS. Please spread widely, as this is a big problem for android users and public networks!!
Click to expand...
Click to collapse
thanks alot man, this tutorial is really helpful.
Hi I m android 4.0 user I have followedyour steps but after restarting no login page is coming what I have to do??
I have the Samsung S7 and through your tutorial I am able to connect to Wifi but my company's login page doesn't come up in the browser (Opera, Chrome, Default Browser).
Any one has the other half of the solution?
Try
To sign-on you have to do the following (credit reddit):
1. tap sign in to Wi-Fi
2. press the three dots
3. choose you network as is
4. open chrome and go to any website that will redirect you to sign in page
5. sign in
ref
http://forum.xda-developers.com/nexus-4/help/lollipop-wifi-issue-networks-t2943547?nocache=1
or more possible solutions here
https://productforums.google.com/forum/#!topic/nexus/7uHt17YM8K8
Still can't login. Tried the reddit solution but didn't see a "use network as is" button or anything close. Also tried to make the IP static. Still nothing. Someone please help! I'm at my wit's end!
I have a Samsung SM-G318ML Android 4.4.4 with security patch from 9-1-2016. None of the procedures above work to get to a browser logon screen. I will go down to a nearby Starbucks soon and try using the phone's "Internet" browser instead of Chrome - I have not tried that yet. Holding down the WIFI button on the screen where you choose a particular WIFI source just sends me back to the previous screen. There is nothing labeled "Control Panel." I cannot find a screen to change from automatic to static IP, nor can I find OpenDNS or GoogleDNS. Every generation of Android seems to have significant differences in accessing these features of the operating system making this a really frustrating problem. Any suggestions - beyond the obvious "get an iPhone."
Solved on 2nd hand unlocked Galaxy Note 4 that had been reset before I bought it. Solution: downloaded Dolphin browser app and an app called Wifi Browser Login, by Cedric Ho; both free from Google Play store. In the settings for Wifi Browser Login, select: Login Action. What to do if login from browser is required. Then select: Popup WebView. I then found that connecting to public Wifi triggered the usual message that the wifi had been connected to, but instead of just not getting the browser login page that requires T&Cs to be accepted, a small window appeared asking which browser I wanted to use to open that page. It had the range of my available web browsers to select from, including Dolphin Web Browser. I selected it from that window and Dolphin opened showing the T&Cs acceptance page for the public wifi I had connected to but had previously been unable to use. I have not experimented to see if adding the Dolphin browser app was necessary or not, it might be that Wifi Browser Login alone was the solution.
I am surprised that this problem has existed since 2010 and there is no solution offered from Samsung or Android.
tryRoo method works for me. Just to be more specific though. Please read the notes before giving up trying.
1. Connect to wifi as per usual (hold down wifi button to select the wifi connection and choose the connection).
2. Go to any website so that they will prompt to sign in.
3. Sign in.
NOTE:
1. Sign in page will fail to show after the first step. Ignore it. Continue to step 2.
2. After step 1, you have to sign in before the login time runs out. So, do step 2 within the time limit (I am unsure how long. Perhaps around 1min).
3. While doing step 2, not all website will prompt you with the sign in page. Only after I have tried to login to my company website, that the sign in page appear. I have tried yahoo.com webpage, it doesn't work.
I am using Samsung Note 3 and Hotel wifi (I dun think this matter).
I hope this method works.
Reply
dagundam said:
Hi everyone! I've almost torn my hair out the last two weeks trying to figure out this problem. and I've found it!
It is a DNS problem.... you need to use OpenDNS or Google DNS and set it manually in your WIFI settings. Then the login page will appear now when you connect and you'll have internet. Here's how:
To change DNS settings and connect to our system from Android 2.3 device you can do following:
1. "Settings"
2. "Wireless and Networks"
3. "Wi-Fi settings"
4. Menu > "Advanced"
5. Use static IP
6. Copy current IP address (few lines above) to IP address field
7. Set Gateway as router IP (usually the same as current IP except last number is .1, i.e. if your phone IP 192.168.2.130 then router's likely 192.168.2.1)
8. Set Netmask 255.255.255.0 (sometimes it's different, but you should already know what to do if it is)
9. Set DNS 1 and DNS 2 fields as per table below (these are Google DNS values):
DNS 1 8.8.8.8
DNS 2 8.8.4.4
10. Menu > "Save"
11. Restart your phone (power cycle).
FOR ICS/Android 4.0 people:
1. Settings
2. WiFi (click on word "WiFi", not ON/OFF switch)
3. Press and hold preferred (or active) wireless network until dialog pops up
4. Select "Modify Network"
5. Check "Show advanced options" checkbox at the bottom
6. Switch "IP settings" to "Static"
7. Keep IP address, Gateway and Network prefix length the same (should be set from standard DHCP)
8. Set DNS 1 and DNS 2 fields as per table above.
9. "Save"
10. Restart your phone (power cycle).
CHEERS. Please spread widely, as this is a big problem for android users and public networks!!
Click to expand...
Click to collapse
So I did the update for Android 4.0 except it s not allowing me to save (the button is not opening up)
Any bright ideas to fix this will be greatful ..
br
Akash
I have the same problem and am surprised the fix is so complex, and it sounds like it might be specific to one network which isn't much use if like me you are travelling around using dozens of different networks.
However, something I have discovered is that, for me at least, this issue only exists when the browser tries to connect to an https address (which includes google and most sites it seems). But if you try to connect to a regular http site ( I use the Indepent newspaper (uk) by default but I can't post the url) then it generally redirects me to a log in page successfully
YOU ARE A GENIUS!!! Thank you from the bottom of my heart for this "fix." This problem has almost made me lose my mind!
I copied and posted my original post via the nexus thread. i thought i'd repost it here since i'm guessing some of the other note users may have done this too. Any help would greatly be appreciated. Please note that I got the app to work with my stock rooted rom. Now i'm just trying to get it to work on any wifi network as opposed to just my home wifi network.
Originally Posted by colbyrainey View Post
Sure!
1. Install CopSSH for Windows from here:
http://sourceforge.net/projects/sere...r.zip/download
2. Extract the .exe file from .zip file and run the setup. During the setup, you will be prompted for a username and password, make sure you specify this and make it something you can remember (you will need it later).
3. Activate a user by going to Start->All Programs->CopSSH->1. Activate a User. Select the user you just setup in step 2.
4. Type in and confirm a passphrase (make sure you remember this). Then click activate.
5. Now you need to allow an port exception through your Windows Firewall. Standard SSH port is port 22, so that's what I used. You can do this by going to your control panel, selecting Windows Firewall, and click "allow a program through Windows Firewall."
6. Select Add port...name it SSH and enter port 22.
7. Click change scope...and make sure the radio button that says "Any computer (including those on the Internet) is selected. Click OK.
8. Now we need to setup port-forwarding to your router. To do this you need to know how to access your router, your WAN IP address, and your LAN IP Address assigned by your router.
9. To find out your LAN IP address, open a command prompt and type in "ipconfig -all". Typically, it will begin with 192.168 unless you have modified your LAN settings. To find your WAN IP address settings, google "what is my IP address?" There are a number of sites that can tell you that.
10. To access your router, you need to find it's IP address, which is usually 192.168.1.1 or 192.168.0.1; you will know by entering one of those addresses in your browser and it will prompt you for your login info. If you don't know your user name and password, I can't help you there but Google may be able to (try to look-up the default username and password for your router model).
11. Once logged in, find your "virtual server" or "port forwarding" settings, specify port 22 - 22 for the start and end range, and route it to the LAN IP address you found in step 9. Save your settings and exit your browser.
12. If you've made it this far, your SSH service and port forwarding settings are done; now you just need to log into it. Download SSH Tunnel from the Google Play Store.
13. When you open it up, it will ask you for a number of settings. I have listed them below and what you need to enter in each textbox:
- Host Name: Enter your WAN IP address that you discovered in step 9.
- Port: Enter "22"
- Username: Enter your username you specified in CopSSH
- Password: Enter your password you specified in CopSSH
14. Make sure the following options are checked:
- Use socks proxy
- Global proxy
15. That's it! Now scroll to the top of the app and check the first checkbox labeled "tunnel switch" and it should connect you.
Please keep in mind that you need to be logged into a wifi connection, but it doesn't have to be your home wifi connection!
DON'T forget the thanks button!
Lkrfn5283:Thank you for this post. I'm unsure what i'm doing wrong but i went over the instructions and made sure i did everything correctly, but it keeps saying "error: cannot connect to host" I'm using a tmobile galaxy note with a stock rooted ics rom. This write up should apply to any phone with an ics based rooted rom correct? any help would greatly be appreciated as i'm completely lost on what i did wrong.
*note: on step 11 it shows two areas where you can enter the IP address and start port/end port. One is labeled "internal" and the other is labeled "external". On the internal i input my WAN IP and ports starting and ending in 22. On the external I input the remote address and the local port/remote port as the starting and ending ports given by the sshtunnel app.
I have the chromecast and if I turn off mac filtering my chromecast works. My question is how do I find out my chromecast mac address so I can add it to my filter list. I can't find it anywhere. Thanks in advance
formulabird said:
I have the chromecast and if I turn off mac filtering my chromecast works. My question is how do I find out my chromecast mac address so I can add it to my filter list. I can't find it anywhere. Thanks in advance
Click to expand...
Click to collapse
1) Get the chromecast IP address (Use the chromecast app on the phone, select your device, scroll down to get the IP)
2) Open command prompt, type "arp -a"
3) Look for the chromecast IP and there is your MAC address to the right
You might have to ping it first before running the arp -a command.
supernova_00 said:
1) Get the chromecast IP address (Use the chromecast app on the phone, select your device, scroll down to get the IP)
2) Open command prompt, type "arp -a"
3) Look for the chromecast IP and there is your MAC address to the right
You might have to ping it first before running the arp -a command.
Click to expand...
Click to collapse
Command prompt from a windows laptop or can I run that command from terminal on my phone. And thanks for your reply I will try it when I get home
formulabird said:
Command prompt from a windows laptop or can I run that command from terminal on my phone. And thanks for your reply I will try it when I get home
Click to expand...
Click to collapse
I believe that is only a windows command
Any time I have trouble finding MAC addresses when using MAC filtering, I just check the log on the router for a MAC address repeatedly looking for a connection. And anyone saying that you can let someone dangerous in that way, most likely not AND you'd get the same thing most likely by running the windows command. If they can MAC spoof, I think they can IP spoof too.
In addition, the MAC address is on the Chromecast box and on the unit but I've seen reports that the number on the box is more accurate than the number on the unit for whatever reason.
Enjoy.
I have configured Mac Address filtering on my WiFi router. I have added the MAC address of Chromecast on my router. The chromecast gets connected with the router and my Mobile. Now the problem is whenever I try to cast from my mobile, I don't get any display on the TV. At the same time, other mobiles from the house hold get disconnected from WiFi network.
Require help.
I'm working on a project which uses Google Homes to aid in data collection, and each of our participants logs information via voice command. This data is written to a database, but currently I haven't found a way to distinguish which commands came from which Google Home.
I'm still figuring out what's possible with these devices, but does anyone know any tricks or authentication techniques to scrape off unique identifiers? I need to whip up an authentication scheme for distinguishing recorded Google Home commands between hardware units.
IP address?
<google-home-ip>:8008/setup/eureka_info?params=device_info&options=detail
Pull the info off the router?
I like @Ogre_nl's answer!
The hardware address is the mac address of the ethernet interface of the device. For the Home Hub and Home Mini's that I have, the only interface is Wifi, so the hardware device would be the MAC address of the WiFI device.
Typically, I would grab the MAC Address via the Google Home App under <Device Name> -> Settings -> Scroll to the very bottom and you will find the details of the device. (verified on an iOS device as well as the Google Home app on my s9+, Pixel 2 XL, and Pixel 3 XL).
If you don't have access via the Google Home app, you could also get the IP address from the device itself via the settings function (e.g., home hub > swipe up for settings) and then login to your upstream router to get the matching IP address and the corresponding mac address.
If you use a network monitoring device like the neat little Fing.IO device, you can get the MAC Address from that interface/service as well.
u1gc said:
I'm working on a project which uses Google Homes to aid in data collection, and each of our participants logs information via voice command. This data is written to a database
Click to expand...
Click to collapse
Hi, i'm interested how you write in your database the voice command. How you extract command voice and transform it in string? Do you use a Google Action or a script that "hack" google home?