Hi guys. I rooted my legend succesfull and when I go to terminal emulator and type su i gives me the # as it should. But I still can't get Wifi Tethering to work it gives me errors when I push start.
Loading tiwlan_drv.ko module failed
Activating wifi interface failed
setting ad-hoc mode failed
setting essid failed
setting channel failed
Any advice?
Best Regards Liquid211
This might be a little late, but did you or anyone try using this - forum.xda-developers.com/showthread.php?t=754961 - on the Legend?
Hello, everyone i have problem with sixaxis Controller app, i was trying to connect PS3 controller but sixaxis app shows error:
Attempting connection type 1...
Driver starting
Could not load bluetooth library
Error: Failed to configure bluetooth
Touchscreen device created successfully
attempting conection type 2...
Driver starting
Could not load HCI library
can i pair PS3 controller with my xperia z5? and how to fix this error?
phone is UB, rooted, Stock 6.0 Marshmallow.
thanks for your answers
sorry, i realize that i write this in wrong section after i post it
I also have the same problem
Did you try the compatibility checker? It clearly states that it isn't compatible with every device.. if it is compatible it might be a MM issue.
The compatibility cheker gives the same error, I think it's MM issue, It doesn't work on galaxy s7 either
Running HadesRom v 6.0 on my Galaxy Note 8 [SM-N950F-DS] , with kernel version 4.4.111-15325116.
Kali linux is installed using Termux and UserLAnd.
I ran into trouble today: I was trying to enable the monitor mode for the wlan0 interface. With airmon-ng I ran the following command :
Code:
airmon-ng start wlan0
And I get this error message :
Code:
bcmsdh_sdmmc - [phy10]mon0: ERROR while getting interface flags: No such device
So, I don't know what to do. I've tried this :
Messing around with various commands (like "airmon-ng check kill")
Looking for another driver for the Wi-Fi chipset (no significant results, but I think this could help)
Trying BCMON app, but the monitor mode failed (by the way, I saw that custom scripts could be available)
Any help would be great, I'm totally lost here !
Running HadesRom v 6.0 on my Galaxy Note 8 [SM-N950F-DS] , with kernel version 4.4.111-15325116.
Kali linux is installed using Termux and UserLAnd.
I ran into trouble today: I was trying to enable the monitor mode for the wlan0 interface. With airmon-ng I ran the following command :
Code:
airmon-ng start wlan0
And I get this error message :
Code:
bcmsdh_sdmmc - [phy10]mon0: ERROR while getting interface flags: No such device
So, I don't know what to do. I've tried this :
Messing around with various commands (like "airmon-ng check kill")
Looking for another driver for the Wi-Fi chipset (no significant results, but I think this could help)
Trying BCMON app, but the monitor mode failed (by the way, I saw that custom scripts could be available)
Any help would be great, I'm totally lost here !
Installing Nethunter
1. Download and install magisk module called KaliNethunter
2. Go to offensive security website and download generic arm64 nethunter image
3. Extract and install following apps from downloaded archive: NetHunter.apk, NetHunterTerminal.apk.
4. Extract kalifs-arm64-full.tar.xz on your phone.
5. Open NetHunter app and grant permissions and root permission
6. Open hamburger menu, select Kali Chroot Manager, select location where you had extracted kalifs-arm64-full.tar.xz and start installing chroot
7. Wait some time (~10 minutes)
8. Start chroot. Now you can use nethunter app and nethunter terminal app.
Enabling monitor mode on built-in wifi module
0. I could not enable it on custom roms. On stock 082 it worked, but there are some problems. Contact me if you have any info about enabling monitor mode on roms except stock.
1. Open nethunter app, go to custom commands
2. Click run on "Start wlan0 in monitor mode"
3. Now wlan0 is in monitor mode. I've tried capturing handshakes using airodump-ng, it worked. However, when I tried deauth attack using aireplay-ng, wlan0 was stuck on channel 0.
4. Note that if you turn wifi on/off or try to disable monitor mode, your phone will turn off.
5. Alternative way: you can enable monitor mode using other apps, like penmon. However, your phone will still turn off if you do anything to wlan0 while it is in monitor mode.
Using external wifi adapter
0. Your wifi adapter must support monitor mode. External adapter won't work without a kernel that supports it. I've built one based on darkonah (many thaks to @travarilo ). Atheros HTC based adpaters are not supported!
1. Flash the attached kernel (the latest version is NH_kernel_v2.zip).
2. Now you can use your exernal adapter.
Enabling monitor mode on external adapter
0. I only tested it with Alfa AWUS036NH (chipset ralink3070), but the instruction may be similar for other adapters
1. First, let's install firmware for your wireless adapter
Code:
apt update
apt upgrade
apt install firmware-ralink
2. Execute command iwconfig and check if your adapter is present there. For me it was displayed as wlan1
3. Turn your adapter off and put it into monitor mode
Code:
ifconfig wlan1 down
airmon-ng start wlan1
4. Check airmon-ng output. It will say you that your adapter is now in monitor mode and will give you new adapter's name (for me it was wlan1mon)
5. Now you can use monitor mode on your adapter (for example, to run airodump-ng)
P.S.: Do it at your own risk and don't use this info in illegal purposes. Only you are responsible for your actions.
Thank you very much sir! Really appreciate your work time and efforts!
Just one small query about what rom and firmware are you using?
Heven11 said:
Thank you very much sir! Really appreciate your work time and efforts!
Just one small query about what rom and firmware are you using?
Click to expand...
Click to collapse
Right now I'm using stock rom 082 (and fw 082, respectively), but it would be great if you tested this guide on any custom rom (if you are not going to use built-in wifi module. If you are, I recommend you to use stock rom)
Ok thank you!
tutaf said:
Installing Nethunter
1. Download and install magisk module called KaliNethunter
2. Go to offensive security website and download generic arm64 nethunter image
3. Extract and install following apps from downloaded archive: NetHunter.apk, NetHunterTerminal.apk.
4. Extract kalifs-arm64-full.tar.xz on your phone.
5. Open NetHunter app and grant permissions and root permission
6. Open hamburger menu, select Kali Chroot Manager, select location where you had extracted kalifs-arm64-full.tar.xz and start installing chroot
7. Wait some time (~10 minutes)
8. Start chroot. Now you can use nethunter app and nethunter terminal app.
Enabling monitor mode on built-in wifi module
0. I could not enable it on custom roms. On stock 082 it worked, but there are some problems. Contact me if you have any info about enabling monitor mode on roms except stock.
1. Open nethunter app, go to custom commands
2. Click run on "Start wlan0 in monitor mode"
3. Now wlan0 is in monitor mode. I've tried capturing handshakes using airodump-ng, it worked. However, when I tried deauth attack using aireplay-ng, wlan0 was stuck on channel 0.
4. Note that if you turn wifi on/off or try to disable monitor mode, your phone will turn off.
5. Alternative way: you can enable monitor mode using other apps, like penmon. However, your phone will still turn off if you do anything to wlan0 while it is in monitor mode.
Using external wifi adapter
0. Your wifi adapter must support monitor mode. External adapter won't work without a kernel that supports it. I've built one based on darkonah (many thaks to @travarilo ). Later I'll update this post to list adapters that should be supported by tis kernel.
1. Flash the attached kernel.
2. Now you can use your exernal adapter.
Enabling monitor mode on external adapter
0. I only tested it with Alfa AWUS036NH (chipset ralink3070), but the instruction may be similar for other adapters
1. First, let's install firmware for your wireless adapter
Code:
apt update
apt upgrade
apt install firmware-ralink
2. Execute command iwconfig and check if your adapter is present there. For me it was displayed as wlan1
3. Turn your adapter off and put it into monitor mode
Code:
ifconfig wlan1 down
airmon-ng start wlan1
4. Check airmon-ng output. It will say you that your adapter is now in monitor mode and will give you new adapter's name (for me it was wlan1mon)
5. Now you can use monitor mode on your adapter (for example, to run airodump-ng)
P.S.: Do it at your own risk and don't use this info in illegal purposes. Only you are responsible for your actions.
Click to expand...
Click to collapse
I love it when you put 0 first instead of 1. A true caffeine blooded being. Btw im on .087 fw ver (X00TDB var.). Gonna try the image out and see if internal wifi module works. Im running BT5 on my xp era machine.
ImperialNuggets said:
I love it when you put 0 first instead of 1. A true caffeine blooded being. Btw im on .087 fw ver (X00TDB var.). Gonna try the image out and see if internal wifi module works. Im running BT5 on my xp era machine.
Click to expand...
Click to collapse
What is BT5? I got it
does the kernel support atheros chipset: TL-WN722N v1?
ive done everything i could but my device still dont detect my adapter
...
apt update
apt upgrade
apt install firmware-atheros
airmon-ng... nothing..
xda_u$er said:
does the kernel support atheros chipset: TL-WN722N v1?
ive done everything i could but my device still dont detect my adapter
...
apt update
apt upgrade
apt install firmware-atheros
airmon-ng... nothing..
Click to expand...
Click to collapse
I had some problems building kernel, so I had to disable support for Atheros HTC based cards. You can try to add it as a loadable kernel module.
0. Flash the attached kernel, download and extract module file (ath9k_htc.ko) from zip
1. Go to NetHunter Terminal app and start androidsu shell
2. Go to the folder where you had extracted ath9k_htc.ko. For example:
Code:
cd /storage/emulated/0/Download
3. Install the module
Code:
insmod ath9k_htc.ko
If it throws error like "no such file or directory", check dmesg
4. Check if the module is installed
Code:
lsmod
You should see the name of the module (ath9k_htc) and its size (check attached screenshot)
5. Now try executing airmon-ng in kali terminal.
Module doesn't persist between reboots. Let me know if it works for you, I'll try to automate module installation process.
Throws me error..
xda_u$er said:
Throws me error..
Click to expand...
Click to collapse
Could you please execute dmesg command right after getting this error and show me the output?
its huge, so I put it in notepad
xda_u$er said:
its huge, so I put it in notepad
Click to expand...
Click to collapse
Sorry, my bad, I gave you the module for the previous kernel build (it has different name, that is why insmod throws error). Please try installing the attached module. If anything goes wrong, send me dmesg again.
@xda_u$er did it work?
Well, the installation went ok, but the external adapter its not working, it is not recognized by the device.
xda_u$er said:
Well, the installation went ok, but the external adapter its not working, it is not recognized by the device.
Click to expand...
Click to collapse
Sorry, I don't know what to do with that. You may try to find an old version (~2019) of TRB kernel, I've heard that its developer tried to enable Atheros HTC based adapters support.
Hii again! Your kernel is working amazingly good!and thanks to your guidance nethunter is working fine for me!
But I am unable to perform hid attacks are you able to do them? Like using our phone as a bad usb ! Does this also need kernel modification?
Heven11 said:
Hii again! Your kernel is working amazingly good!and thanks to your guidance nethunter is working fine for me!
But I am unable to perform hid attacks are you able to do them? Like using our phone as a bad usb ! Does this also need kernel modification?
Click to expand...
Click to collapse
As far as I know, it does. I haven't tried any usb attacks, but I'm going to.
Heven11 said:
Hii again! Your kernel is working amazingly good!and thanks to your guidance nethunter is working fine for me!
But I am unable to perform hid attacks are you able to do them? Like using our phone as a bad usb ! Does this also need kernel modification?
Click to expand...
Click to collapse
I've enabled everything that should be enabled to make bluetooth attacks work, but they don't. The adapter is recognized by the system, but nethunter app doesn't see it. I would be very thankful if you tested bluetooth with new kernel. Btw, usb attacks work with new kernel too. I've tried launching firefox on my PC, it worked. This is a really cool thing
Firstly sorry for late reply! I had to reset my device since I was testing some android 11 rom and Thank you sooooo much for V2 of this kernel,usb/hid is working like a charm but I haven't tried bluetooth yet but will definitely try it soon since I don't know how to do it!
Please continue the development of this kerneland remember you are a legend!
Thank you again!
Hii! I want to try Kali nethunter on my device but there are many bugs that I am facing my internet is not working in Kali not monitor mode is working!
Can you please make a nethunter ROM!please
Or give me a backup of your ROM KERNEL AND FIRMWARE THAT I can flash through TWRP !
Please!
PS. Currently I am using Android 10 corvus os and nethunter is not working!