Related
I noticed that when I pressed on it slighty there was a slight squeak noise that came from the casing. I had recently bought a replacement cover and it was fine and than it did the same thing. What is this? Is it normal for most incredible s devices because I have heard other ppl had the same problem. I dont care as much because I have a case for mine but what about you guys??? Any squeaking issues??? LOL
IncredibleSlover said:
I noticed that when I pressed on it slighty there was a slight squeak noise that came from the casing. I had recently bought a replacement cover and it was fine and than it did the same thing. What is this? Is it normal for most incredible s devices because I have heard other ppl had the same problem. I dont care as much because I have a case for mine but what about you guys??? Any squeaking issues??? LOL
Click to expand...
Click to collapse
Yes, same here, mines pretty bad actually!
I've got a case on top and its a tight fit, so it doesn't squeak.
Bad design flaw IMO.
neo-X said:
Yes, same here, mines pretty bad actually!
I've got a case on top and its a tight fit, so it doesn't squeak.
Bad design flaw IMO.
Click to expand...
Click to collapse
Arrgh, it brings out the OCD in me LOL. But I have a case so it isnt bad, and its only in one little corner and I have to press on it so I geuss its not that bad. Its really a shame because I love this phone and thats its only flaw.
The same case here too.
For me its at the corner. I guess its due to the pressure while we want to unlock the phone, we tend to press the back cover first before hittin the power button.
Ive got a red IS, dunno if i can get another replacable one or not...
P.S I aint using any case or anything, its as fresh as outta the box XD
I believe the squeak is caused by some empty space existing between the phone and the back cover. Stick a strip of duct tape on the inside part of the back cover where it squeaks. It should solve the squeaking problem.
Mine squeaks really badly around the volume buttons. putting a case on fixes it though.
Sent from my HTC Incredible S using XDA App
Yep mine squeaks too, the corner near the camera.
Squeaky
No, mine has not had any squeaks. The USB port does rattle a bit. But not enough to get up in arms about. I find the fit and finish surprisingly good considering the chassis seems to be all plastic.
CoolinHL said:
I believe the squeak is caused by some empty space existing between the phone and the back cover. Stick a strip of duct tape on the inside part of the back cover where it squeaks. It should solve the squeaking problem.
Click to expand...
Click to collapse
Isnt that not going to be good for the battery? Overheating it or something? I am kind of weary about putting things inside the phone
yeah it has been discussed tht the cover does squeek, either you have a case that is able to press on the phone good enough to prevent it from squeeking or you put fillers inside the phone to stop the squeeking
IncredibleSlover said:
Isnt that not going to be good for the battery? Overheating it or something? I am kind of weary about putting things inside the phone
Click to expand...
Click to collapse
How do you think that would overheat the phone, exactly? It's not like phones have vents or fans that could be blocked by the tape.
Lol I don't know I'm just weary about stuff when it comesbto my phone maybe ill try that
Sent from my HTC Incredible S using XDA Premium App
Ok did it and it works
Sent from my HTC Incredible S using XDA Premium App
Of the ones that squeak (including mine), how many people have removed the back cover? Mine didn't start to squeak until the third time in pulled the battery cover off. I have noticed that on one side there is a small gap along one side more so than the other.
Mine definitely squeaked as if the cover was loose. It's not much of an issue with a case though.
Yep. Mine squeaks.
Top right (Near the camera & power button) and bottom left (near the home button). Intrigues me that it's like a diagonal thing. oh well.
I lold.
Don't really care though. xD
Just send them an email with some proof, some pictures and maybe a short video which you can clearly hear the sqeezing.
I did that and they send me a new cover
Sent from my HTC Incredible S using Tapatalk
I was able to fix this once by somehow properly placing the back cover back on but when the next time I removed it and placed it back, I again started to have the squeak so I used some plastic tape, placed it on the side of the back as well as the top, placed the back cover back and no more squeaking
I had squeaking on the right top and side.
acme anvil said:
Of the ones that squeak (including mine), how many people have removed the back cover? Mine didn't start to squeak until the third time in pulled the battery cover off. I have noticed that on one side there is a small gap along one side more so than the other.
Click to expand...
Click to collapse
Same here. Mine started squeaking after I removed the back cover for the third time as well. For me it's on the right side, smack in the middle of the device (where my middle finger rests when I hold it in my left hand )
System92 said:
Same here. Mine started squeaking after I removed the back cover for the third time as well. For me it's on the right side, smack in the middle of the device (where my middle finger rests when I hold it in my left hand )
Click to expand...
Click to collapse
I wish this was the only problem that I discovered with the phone. I love the phone but look at what I discovered.
http://oi56.tinypic.com/9u8d9y.jpg
YES! That is a pixel..dead or stuck? I have no idea..Im thinkin its DEAD!!!
FML!!!!! Arrgh now I have to buy a display replacement and open up my phone to replace it...because it bugs me. I dont want to go through warranty, I will have to unroot my phone and S-on. Arrgh
Anyone else with this?
Hi There,
I was wondering if anyone has experience the same issue as me. I only got my Optimus 2x back on the 12th Dec and I've just noticed that the finish on the metal looking plastic surround on the side of the phone has begun to wear.
The phone has spent most of its life in a case and has never been placed in a pocket with anything like (e.g. keys, money) the front and back of the phone are like new, so I'm a little concern with how the finish has begun to wear in such a short space of time.
I just wanted to check if perhaps it's a one off issue with my phone or if other people have had the same problem?
Thanks
Kev
Mine spent all it's life in a gel case and the finish was still A1 when I sold it.
Mine gets **** kicked in my pocket with keys lighters and change with no cover just a screen protector and its still mint Lol must ne something with the case you're usin
Making bad decision's one at a time.
My finish has not even begun to deteriorate.. used it for 8mths already, I've stopped using case for about a month but still use soft cloth cover. Maybe there is something wrong with your finish?
I used to think the same thing, but then i took an arrow in the knee.
Lol jk, i used to think the same thing, but i found out it was the plastic sticker thats on there when its new that was damaged. Sticker removed and its still mint 3 months later
Sent from my Optimus 2X using XDA App
Mines fine, 3 months of heavy use and no wear on the finish except for where I've dropped it and it's scratched. The home button does look a bit buffed like it has micro scratches and has lost its shine on one side though.
I've had mine for about 6-7 months, some paint worn off the first day i got it.
Though only on the bottom left corner, never used any case.
Also managed to get a small scratch on beneath the back button on the first day, even though it never got in contact with anything that could made a small scratch like that.
It might have been there when i got it, never thought about it really... And yes, it was brand new.
Otherwise its in good condition.
Was about to send it back, but never did, stupid summer. Kinda regret it now haha.
Had mine since release date with heavy usage no cover and there's. No wear and tear at all. I also dropped it over 10 times whilst being drunk. It Must've been the cover that damaged yours.
Sent from my Optimus 2X using XDA App
Got mine in Sept just one or two scratches...always in pocket with keys or change..!!
Sent from my LG-P990 using XDA App
mine is like new https://plus.google.com/photos/1031...ms/5689355740415531633?authkey=CKn837SPv7roLw i got mine in june
eniux said:
Had mine since release date with heavy usage no cover and there's. No wear and tear at all. I also dropped it over 10 times whilst being drunk. It Must've been the cover that damaged yours.
Sent from my Optimus 2X using XDA App
Click to expand...
Click to collapse
Mine came with free screen bleed and the actual glass seems to have a defect in it, like it isn't entirely clear, has a slight line or something. I wont blame LG for that at all though as corning gorilla made the glass.
dandeli21 said:
mine is like new https://plus.google.com/photos/1031...ms/5689355740415531633?authkey=CKn837SPv7roLw i got mine in june
Click to expand...
Click to collapse
What cover is that?
Neefy said:
What cover is that?
Click to expand...
Click to collapse
Looks like the one you can but at the wind store
Making bad decision's one at a time.
Looks like one I've seen on eBay
I'm using mine without a bag or screen protector and it's still close to mint.
LG did a good job on the hardware - it's just this crappy software & support..
Thanks to CM7 I'm really happy with my phone though.
Mine just broke Camera len cover yesterday I really don't know what cause this and anything else still like NEW!
12rithy said:
Mine just broke Camera len cover yesterday I really don't know what cause this and anything else still like NEW!
Click to expand...
Click to collapse
Just cover it with some tape lol
Making bad decision's one at a time.
Its mostly due to the case itself and may not be defect in the phone.
Some cases do wear off some fine finishes...
Thanks all, not sure if it was the case or if I was just unlucky and got one with thin coating. Anyway the supplier has offered a full refund as they don't have any more in stock I don't really want to get a refund as I got the phone for a good price, so I'm just hoping they get a few more in stock over the next week or two and then I can swap it.
Hey guys, I'm having a massive problem with dust in my front facing camera. It renders it practically unusable, everything looks white when I switch to the front facing camera.
Any ideas on how to remove the dust? I don't even have any idea how it got in. Best bet is through the ear piece I guess.
Sent from my GT-N7000 using xda premium
not sure if it will help you
but for most of my high end cameras i use a Giottos Rocket blower to get rid of the dust in most parts
Thing is, is behind a glass piece sigh
Sent from my GT-N7000 using xda premium
arghh! this seems very problematic since unless you dismantle the Note, it will be nearly impossible to wipe the dust. Didn't you use a protective cover and screen protection from the beginning or the dust was present the 1st day you got the Note?
Final5k said:
arghh! this seems very problematic since unless you dismantle the Note, it will be nearly impossible to wipe the dust. Didn't you use a protective cover and screen protection from the beginning or the dust was present the 1st day you got the Note?
Click to expand...
Click to collapse
Thats the thing. I dont remember if it was present the day I bought it. Yeah I did use a protective cover. You guys don't have a problem with dust in the front camera?
Maybe it's a fault? Can you physically see the dust on the glass in front of the camera? Mine looks clear like this image:
http://i-cdn.phonearena.com/images/reviews/108271-image/Samsung-Galaxy-Note-LTE-Review-Design-16.jpg
You probably can take it to warranty Samsung service and say it never worked.
I don't use a protective cover and have had no dust issues. I've noticed some dirt/dust getting into the back cover area which i just blow out occasionally. Maybe if you clean/blow out those areas and ports it might dislodge any debris?
rowee270 said:
Maybe it's a fault? Can you physically see the dust on the glass in front of the camera? Mine looks clear like this image:
http://i-cdn.phonearena.com/images/reviews/108271-image/Samsung-Galaxy-Note-LTE-Review-Design-16.jpg
You probably can take it to warranty Samsung service and say it never worked.
I don't use a protective cover and have had no dust issues. I've noticed some dirt/dust getting into the back cover area which i just blow out occasionally. Maybe if you clean/blow out those areas and ports it might dislodge any debris?
Click to expand...
Click to collapse
Yes, I can physically see the dust. The front facing camera is greyed over. Sighh
Well if you're feeling adventurous, you can dissemble the Note yourself and clean it. There are a few tutorials on youtube under "disasemble galaxy note" such as this one:
http://www.youtube.com/watch?v=UFDr3PQMTxw
It doesn't seem that hard and you don't need any special equipment.
This definitely sounds like a clear cut warranty claim case.
Nothing is supposed to be able to enter that little space in front of the camera if the phone has not broken or been broken since day one. Thats my point of view anyway.
rowee270 said:
Well if you're feeling adventurous, you can dissemble the Note yourself and clean it. There are a few tutorials on youtube under "disasemble galaxy note" such as this one:
http://www.youtube.com/watch?v=UFDr3PQMTxw
It doesn't seem that hard and you don't need any special equipment.
Click to expand...
Click to collapse
I followed the video and dissembled the phone. Luckily it all went well and I was able to remove all the dust. The front camera is working perfect now. Thankss!
Julian2103 said:
I followed the video and dissembled the phone. Luckily it all went well and I was able to remove all the dust. The front camera is working perfect now. Thankss!
Click to expand...
Click to collapse
Awesome
Just a generall concern...shouldn't the warrenty cover a scenario like this?
Julian2103 said:
I followed the video and dissembled the phone. Luckily it all went well and I was able to remove all the dust. The front camera is working perfect now. Thankss!
Click to expand...
Click to collapse
I had same problem, and also eventually dissasembld to clean. I did otice (prior to dissassembly) that the glass screen was slightly loose against the chrome bezel at along the top edge (i.e. where the earpiece & front cam are located). pressing on that edge (particularly at the RHS near the cam) there was some "give" - i.e. you could push the glass and it would depress into the bezel by 1mm-2mm and then spring back up.
I suspect that is why dust has ben able to enter. Unfortunately, after cleaning and reassembly, the same "give" is still there. I'd hoped that it was just a badly assembled unit and that it would now be properly sealed, but no joy.
did/does your phone have a similar issue by any chance?
Also, I did the cleanout yesterday, same day as I upgraded to ICS (UK CPW XXLQ2 baseband XXLPT). I'm now noticing terrible wifi/cell radio performance (lost 25% battery in 45 mins just browsing with min screen brightness, lots of wifi dropouts, loads of heat dissipating to rear of case). This in same place (my bed!) as I always surf same sites every morning and where on Gingerbread I'd have no dropouts and my battery drain would be minimal (<5%).
Again, I'm wondering whether ICS is to blame or whether I've somehow messed up during reassembly (maybe poorly reconnected one or more of the ribbon connectors leading to the radio chip?). Have you noticed any difference in Wifi/cellular reception since reassembly?
Battery drain and wifi performance continued to be terrible, so I took it apart again and reassembled once more, this time with greaer care. I think I had done a bad job 1st time round as it's now got much better wifi signal, back to how it was originally.
Battery drain is slightly better too but still much worse than on GB but I think that is just a defect of the stock ICS, just coincience that I did the ICS install same day that Itook the note apart.
Did anyone try to blow out the dust and did that work?
I'm not to keen to pick the phone apart for it.
I just noticed this evening that I have a little bulge under my SIM slot. The rubber protrudes about 1mm, and is about 1/4" long. It happens to be exactly above where my ring finger rests when I hold my phone, as if my finger (over the past 6 days) has forced the separation. It's nothing a bumper or case won't fix -- but I don't have a bumper or a case.
Hopefully it's an isolated case **He naively says starting at the screen lift on his Nexus 7**
ralexand said:
I just noticed this evening that I have a little bulge under my SIM slot. The rubber protrudes about 1mm, and is about 1/4" long. It happens to be exactly above where my ring finger rests when I hold my phone, as if my finger (over the past 6 days) has forced the separation. It's nothing a bumper or case won't fix -- but I don't have a bumper or a case.
Hopefully it's an isolated case **He naively says starting at the screen lift on his Nexus 7**
Click to expand...
Click to collapse
I dont see it. Can you get a closer picture?
Sent from my GT-P7310 using xda premium
ctowne said:
I dont see it. Can you get a closer picture?
Sent from my GT-P7310 using xda premium
Click to expand...
Click to collapse
Buy specs mate. Or get a better monitor.
Oh nevermind I see it now. I would send it back. He said under so i was looking under. That is more like above it.
Sent from my GT-P7310 using xda premium
Looks like the rubber band warping. Not sim slot.
I ordered a nexus 4 and all I got was bo.
Yeah, that looks like a clear defect. I'd definitely have Google replace it.
I've had mine for over a week. It doesn't have that issue. Thank God.
That's a definite defect. Get a replacement ASAP.
Sent from my Nexus 7
At least it still works mine is lifeless
Hi
Might just be clip on the back cover that hasn't engaged. Can you clip it back in by squeezing the back at that point against the front?
Regards
Phil
PhilipL said:
Hi
Might just be clip on the back cover that hasn't engaged. Can you clip it back in by squeezing the back at that point against the front?
Regards
Phil
Click to expand...
Click to collapse
Nah, it's surprisingly stubborn. I've put quite a bit of pressure trying to "pop" it back into place to no avail. I really do hope this isn't a mass problem. I'm going to do an RMA (also have the rattle & hiss). The next one I'll have a case from Day 1.
Hi
ralexand said:
Nah, it's surprisingly stubborn. I've put quite a bit of pressure trying to "pop" it back into place to no avail. I really do hope this isn't a mass problem. I'm going to do an RMA (also have the rattle & hiss). The next one I'll have a case from Day 1.
Click to expand...
Click to collapse
The rattle is just the plastic lens in the camera related to auto focus, a lot of phones have the same rattle, search for "camera rattle". Hiss is caused by the DC-DC power converters in the phone, it's a known issue with low power equipment such as mobile phones, just do a search for the terms "dc dc converter audible noise". These are not faults, just side effects of the technology that most people will ignore or not notice.
Such is the variable nature of these components you may get another phone that appears better or just the same or even worse, but very likely the rattle will always be there as that is just how the cameras are at rest with nothing powering the magnetic servo of the lens.
Obviously the bulge in the side of the case shouldn't be there, certainly a reason to get it replaced.
Regards
Phil
OP - I finally received my phone yesterday and noticed that I too have the same little bulge. Mine is on the opposite side of the phone. It does look like it's just a clip that didn't engage. However, like you, I tried to push it in to no avail. Since there is nothing else wrong with my phone at all I am holding off on sending it in for an RMA because I'd be afraid to get a phone with worse defects. This one is so minimal that I can live with it. Especially since I REALLY have to look for it to see it.
With that said, I'm contemplating just removing the backing, which I have read is super easy (just remove the two screws at the bottom and the sim tray and it pops off). I was thinking about doing this to inspect that little section to see if something is just protruding a tiny bit that can be easily corrected. I'm going to wait until I see others have successfully removed the backing before attempting it myself.
Just wanted to let you know that you are not alone.
UPDATE: I called Play Support and told the rep about the issue. He said I'm not the first person to have the small bulge and recommended an RMA since it's considered a defect so I went that route.
I returned a Nexus 7 that had the same problem. There was no screen lift, so I hesitated, but after taking the back off and seeing that internal components were pressing the bezel outwards (and the screen had been attached onto the already-bent bezel, leaving the bulgey spot without any adhesive to speak of even if I could get the bezel straight) I decided I didn't want to wait for dust to start creeping in and took it back. Glad I did, my replacement was perfect. Hope you get the same result with a new N4 (whenever they get around to having a new one for you :| ).
Damn I have the buldge to Don't know if i'm just noticing or if it's been there all along. I've decided i can live with the tiny amount of hiss in the ear piece and the camera rattle (which i've been told and believe is normal and not a defect). Can't decide if this is something that'll worsen over time or just live with this in fear of getting a device with worse issues. DOH
marnel47 said:
Damn I have the buldge to Don't know if i'm just noticing or if it's been there all along. I've decided i can live with the tiny amount of hiss in the ear piece and the camera rattle (which i've been told and believe is normal and not a defect). Can't decide if this is something that'll worsen over time or just live with this in fear of getting a device with worse issues. DOH
Click to expand...
Click to collapse
Don't fret. I called Google about this issue since I have it too. The rep told me he had a few reports of this and recommended an RMA for it. It won't get worse but if it does bother you just call and have them send you a new one. The process is really easy. I've done this in the past with other Nexus devices as well. They send you a new one within 3-5 business days and put an auth charge on your card for the full price of the phone. Then, when you get the new phone you put the old one in the box and send it back to them. When they receive the phone they remove the auth hold. This way you are never left without a phone.
Anyone opened theirs up?
Sent from my Nexus 4
The longer I'm having this phone, the more disillusioned I am becoming with it.
I sold my iPhone 5 in September and 'upgraded' to the Z1...
Yet despite needing initial time to get over the pathetic viewing angles, I developed a real fondness for the phone...
But that honeymoon period soon ended... Two weeks later the phone had proven that it was the biggest scratch magnet I ever owned. The perfectly hard wearing Dragontrail glass is covered by a super scratch prone ASF, the aluminium frame has lots of ugly scuff marks on it despite taking great care of the phone and only keeping it in a soft pocket - alone - and today the grille bubbled up and came off the speaker at the bottom.
By the way it is nothing but a piece of cut out mesh, fabric essentially, that has been glued down with what seems to have become really tacky glue. Clearly not water resistant as it's advertised.
I've put it back but it wouldn't stick. I really need to send it in for a warranty repair but I'm leaving Europe for 5 months on Monday so I can't!
So the Z1 is a poorly constructed phone made to appear as if it is of a premium build quality and Sony did not build it to look good in a month, or two or 12 down the line let alone two years.
Who in their right mind ok'd the ASF what a hideous idea?!
Anyway I digress, has anybody else's speaker grille come off or bubbled up?
Sent from my C6903 using xda app-developers app
Here it is... It's just a piece of plastic mesh and mine has now fallen off. Anybody with the same?
Sent from my C6903 using xda app-developers app
Another pic of the grille
Sent from my C6903 using xda app-developers app
Use superglue. The grill has nothing to do with the waterproofness.
It will still be under warranty when you get back. Send it then?
Sent from my C6903 using xda app-developers app
I can't superglue it back as it now has a kink in it... And just looks bad.
A warranty repair it is then when I come back. Thanks for the advice anyhow.
As long as my waterproofing is not affected I'm gonna live with it.
But yes I am fundamentally disappointed with some of the materials used to make this phone... and at the top of my list is the ASF with the logo baked in...
This is just yet another thing...
Sent from my C6903 using xda app-developers app
Didn't somebody's silver ring around the power button also just fall off? These things shouldn't happen...
Sent from my C6903 using xda app-developers app
My speaker grill just started pealing off. Noticed when it got caught on something.
Does this actually affect whether it's waterproof or not? I'm imagining not, as it's just a thin piece of plastic, either way I'll be more careful with the phone now.
Mine isn't under warranty because I've had it so long, and it's rooted too...
corydor13 said:
My speaker grill just started pealing off. Noticed when it got caught on something.
Does this actually affect whether it's waterproof or not? I'm imagining not, as it's just a thin piece of plastic, either way I'll be more careful with the phone now.
Mine isn't under warranty because I've had it so long, and it's rooted too...
Click to expand...
Click to collapse
@corydor13 @Johann_London
I've noticed today, that my speaker grill is a bit "wobbly" which means that if I put my finger on it I can move it a bit to the left and right and also up and down. I'm not sure if it was there from the beginning (I have the phone since September) but I doubt it. Is this "normal" or already considered a case for warranty?
I'm afraid now the grill might come off soon! I have a case on the phone and always have it alone in one pocket and handle it with care so that shouldn't be the cause.
What did you do? Sent it in under warranty?!
drsoran2 said:
@corydor13 @Johann_London
I've noticed today, that my speaker grill is a bit "wobbly" which means that if I put my finger on it I can move it a bit to the left and right and also up and down. I'm not sure if it was there from the beginning (I have the phone since September) but I doubt it. Is this "normal" or already considered a case for warranty?
I'm afraid now the grill might come off soon! I have a case on the phone and always have it alone in one pocket and handle it with care so that shouldn't be the cause.
What did you do? Sent it in under warranty?!
Click to expand...
Click to collapse
That's basically how the problem started for me.
After a while of trying to keep it on, I got annoyed with the fact that it kept falling off, so just left it off.
Haven't sent it back for repairs or anything as I don't see the point.
It's been soaked since and doesn't have any problems..(yet).
So it is still waterproof? But even if so, it's very disappointing that this happens after only 9 months and without the grill it looks ugly, like it was used for ten years.
I also have that strange, squeaky vibration motor sound. I can live with the former, but both defects combined are almost too much.
I'm going to talk with the Sony chat tomorrow and see what they'll say.
drsoran2 said:
I'm afraid now the grill might come off soon! I have a case on the phone and always have it alone in one pocket and handle it with care so that shouldn't be the cause.
What did you do? Sent it in under warranty?!
Click to expand...
Click to collapse
It's not a problem, they used a cheap glue to stick that grill under the phone and in time, hot temperatures and maybe water, the glue just lost his consistency. Try to keep it on or just apply some drop of good glue and do not close the speaker (LOL)
BTW, I can move mine too but until stay there I do not touch it.
I'm going to post this thing that happen to me yesterday I think I was the only one and I found this, yesterday I saw how my grille can move and I was like , I take great care of the phone, doesn't have scratches of any type, and now this.... I will try to remove it very very careful and apply some kind of glue I have, and see what happen
A little too late to this thread, but just posting my own experience. The little speaker mesh literally fell off of my Xperia Ray. After it comes off, you can not hear anything on the speaker phone when talking to someone and Music, although loud comes with very high frequencies. To fix this, you take black electrical tape, cut just a small part and stick it over the plastic, then use a clear plastic tape to cover that along the bottom. The sound is not like the original but still works better than no mesh. The in-Call volume of these phones is a major disappointment. You are right, the build quality of most android phones is junk. What the Android world needs badly is the iPhone build quality.
Well I'm back with some things to say, some friends I know seem that doesnt have this problem at all, weird, after some time I finally removed the grille it was just holded with strong by a very small side, I try glue that have a color like orange/brown (I dont remember the brand) it work ok but just for 2 weeks, after that it starts to move again, so now I try a Gel glue and it seems that work excellent, it doesn't move at all, with the other glue it holds, but it can move a little, seems that this glue is the solution, and it says in the boxx is water resistant so, better for me, I have to say that you have to ve very careful because a little drop in the mic and nobody will hear you again, the same for the speaker, so far I dont have problems :victory: so if you found a gel based glue in a little stick, try it if you have this problem
jacker60 said:
Well I'm back with some things to say, some friends I know seem that doesnt have this problem at all, weird, after some time I finally removed the grille it was just holded with strong by a very small side, I try glue that have a color like orange/brown (I dont remember the brand) it work ok but just for 2 weeks, after that it starts to move again, so now I try a Gel glue and it seems that work excellent, it doesn't move at all, with the other glue it holds, but it can move a little, seems that this glue is the solution, and it says in the boxx is water resistant so, better for me, I have to say that you have to ve very careful because a little drop in the mic and nobody will hear you again, the same for the speaker, so far I dont have problems :victory: so if you found a gel based glue in a little stick, try it if you have this problem
Click to expand...
Click to collapse
Hi
Does anyone know where I can buy this part (black botton cover)?
I have tried to find a place that sells it and I could not find one.
However, I replace the screen on my phone (Xperia Z1s C6916) about three months ago, and only ripped the flex cable connecting the audio jack and sensor. When I did that, I bought a screen that was already connected to a frame. However, I forgot to transfer the mesh covering the speaker. I did not know it was just a mesh piece on the outside until now... I took the phone apart, yet again, ripped the flex cable connecting the microphone... Why are parts for this thing so expensive!?
Johann_London said:
Anyway I digress, has anybody else's speaker grille come off or bubbled up?
Sent from my C6903 using xda app-developers app
Click to expand...
Click to collapse
Mine fell off a few months ago.
AkiraProject said:
Mine fell off a few months ago.
Click to expand...
Click to collapse
Mine fell off yesterday. I bought mine in September. I'm glad the water proofing hasn't been affected by it (going by others' accounts, I'm too chicken to try it myself.) I was really upset cause I bought it only for the waterproofing and the other features were a plus. I'll super glue it then. India is getting too hot, the glue melted off.
Yeah mine fell off too, it's been off for a while now.
My USB flap fell off too, though it was probably my own fault over using it without care. So I guess mine isn't waterproof any more ? :victory: