I am using CM11 Beta 5 ....CM11 development has made it more stable than most of ROMs ...thanks to all developers ..i want flash the newest built of CM11 ...i was considering dirty flashing the newest built ...all i want is not losing my data ...also tell me stwp by step way to dirty flash ?
Sent from my HTC Desire C using XDA Free mobile app
hardymall20 said:
I am using CM11 Beta 5 ....CM11 development has made it more stable than most of ROMs ...thanks to all developers ..i want flash the newest built of CM11 ...i was considering dirty flashing the newest built ...all i want is not losing my data ...also tell me stwp by step way to dirty flash ?
Sent from my HTC Desire C using XDA Free mobile app
Click to expand...
Click to collapse
Dirty flashing isn't recommended because it can cause a fair few issues. So it's always better to clean flash.
Sent from my OnePlus One using XDA Premium 4 mobile app
rudi_j7 said:
Dirty flashing isn't recommended because it can cause a fair few issues. So it's always better to clean flash.
Sent from my OnePlus One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
WiFi tethering and soft reboot is not an issue in CM11 RC2 U1??
Sent from my HTC Desire C using XDA Free mobile app
hardymall20 said:
WiFi tethering and soft reboot is not an issue in CM11 RC2 U1??
Sent from my HTC Desire C using XDA Free mobile app
Click to expand...
Click to collapse
Use RC1. And no. It's fixed.
Sent from my OnePlus One using XDA Premium 4 mobile app
What's the problem with RC2 ...?
hardymall20 said:
What's the problem with RC2 ...?
Click to expand...
Click to collapse
RC2 uses ION and not legacy parts so it has a few issues, but it's still daily driver material
Sent from my A0001 using XDA Premium 4 mobile app
rudi_j7 said:
RC2 uses ION and not legacy parts so it has a few issues, but it's still daily driver material
Sent from my A0001 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Issues are minor ..but soft reboot and wifi tether work properly or not ?
Sent from my HTC Desire C using XDA Free mobile app
hardymall20 said:
Issues are minor ..but soft reboot and wifi tether work properly or not ?
Sent from my HTC Desire C using XDA Free mobile app
Click to expand...
Click to collapse
All that stuff works fine.
hardymall20 said:
I am using CM11 Beta 5 ....CM11 development has made it more stable than most of ROMs ...thanks to all developers ..i want flash the newest built of CM11 ...i was considering dirty flashing the newest built ...all i want is not losing my data ...also tell me stwp by step way to dirty flash ?
Sent from my HTC Desire C using XDA Free mobile app
Click to expand...
Click to collapse
I know for a fact that dirty flash of CM11 will work just fine - one exception is RC2, and RC2 Update 1, because these are ION builds. My guess is that it is possible, but you are on your own. What is stoping you from testing? Just do a backup from TWRP and flash the ROM and boot.img. You will get "Android is upgrading" and ROM will boot for sure. If my latest porting of old framebuffer to new ion graphics stack turns out sucessful, minimum brightness bug and blocked proximity sensor during call will be fixed also, so only the Viber problem will remain - this problem plagues a lot of CM11 builds for similar devices - Blade III, Huawei, Pico...
Soft reboot and Wifi tether are fixed because I ported the proper driver from 3.4 kernel in the meanwhile.
h1gh1 said:
I know for a fact that dirty flash of CM11 will work just fine - one exception is RC2, and RC2 Update 1, because these are ION builds. My guess is that it is possible, but you are on your own. What is stoping you from testing? Just do a backup from TWRP and flash the ROM and boot.img. You will get "Android is upgrading" and ROM will boot for sure. If my latest porting of old framebuffer to new ion graphics stack turns out sucessful, minimum brightness bug and blocked proximity sensor during call will be fixed also, so only the Viber problem will remain - this problem plagues a lot of CM11 builds for similar devices - Blade III, Huawei, Pico...
Soft reboot and Wifi tether are fixed because I ported the proper driver from 3.4 kernel in the meanwhile.
Click to expand...
Click to collapse
so i won't have much issues (only minor issues) if i dirty flash RC2 U1?
is there any major issue that i might face ..?
hardymall20 said:
so i won't have much issues (only minor issues) if i dirty flash RC2 U1?
is there any major issue that i might face ..?
Click to expand...
Click to collapse
I do not know. I think that there will be no issues, can't guarantee that. If you make a backup of your current state, and fail to dirty flash, you can always return to that backup, dirty flash RC1 and it's boot.img. Upgrade to RC1 should be without issues, probably to RC2 U1 as well. But, I can't be sure.
h1gh1 said:
I do not know. I think that there will be no issues, can't guarantee that. If you make a backup of your current state, and fail to dirty flash, you can always return to that backup, dirty flash RC1 and it's boot.img. Upgrade to RC1 should be without issues, probably to RC2 U1 as well. But, I can't be sure.
Click to expand...
Click to collapse
Thanks ....:thumbup:
Sent from my HTC Desire C using XDA Free mobile app
Related
Hey guys,
I have a nexus one currently running cm7 rc1.
I heard that rc2 came out.
Is there anyway that I could upgrade to rc2 without loosing anything that I currently have on rc1?
What do I do? Could I use rom manager?
Sent from my Nexus One using XDA App
Just flash it over but do a backup first just in case.
Yes, just use ROM Manager to flash to RC2, just don't do a factory reset / wipe and all your settings and apps will carry over.
Depending on what kid of user you are, you may also want to look at Titanium Backup, its a pretty amazing tool. It has a slight learning curve but it really lets you take control of what you want to carry over from one build to the next, specially when you are going between different rom products that require a complete wipe
Soooo, all I have to do is to download the rom and gapps, and only do a backup- no wipe. After I do that will I have the same layout as rc1 but it will be rc2?
Sent from my Nexus One using XDA App
Yes, but be careful, flashing can be habit forming and RC's are a gateway drug. You'll be a crackflasher in no time.
Rod3 said:
Yes, but be careful, flashing can be habit forming and RC's are a gateway drug. You'll be a crackflasher in no time.
Click to expand...
Click to collapse
I am already that.
Sent from my Nexus One using XDA App
On and it worked. I flashed rc2 over rc1 with no wipe and everything works fine.
Thanks
Sent from my Nexus One using XDA App
Shivammcool said:
On and it worked. I flashed rc2 over rc1 with no wipe and everything works fine.
Thanks
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
same here, thanks!
pinke123 said:
same here, thanks!
Click to expand...
Click to collapse
Your welcomed
Sent from my Nexus One using XDA App
Should we wipe to move from 2.3.3 to 2.3.4?
Sent from my Nexus One using XDA App
You shouldn't need to wipe whenever you move minor versions, but it doesn't always work perfectly, and sometimes you end up needing to wipe anyway. Always nandroid, just in case something ends up going wrong on the new install.
I reuploaded the online not available Nightly#146. This nightly seamed to be the most stable, responsive, bugless and fast nightly. You can flash Tiamat or Enki with it.
Its NOT a ICS or JB Rom. Its Gingerbread.
If you want Google Apps, flash the added Google Apps package
You dont need Blackrose. If you're S-On, flash the boot.img inside the Rom.zip via Fastboot with the command:
Code:
fastboot flash boot boot.img
DO NOT: Post to the bug tracker
DO NOT: Open another thread (Please)
DO NOT: Think of this as official forum support; this thread will be strictly user to user support. Don't expect CM-dev help.
Code:
** These CyanogenMod builds are highly experimental and unsupported.
**
** Please refrain from submitting bug reports for any issues
** you may encounter while running one of these builds.
**
** Submitting bug reports on nightly builds is the leading
** cause of male impotence.
INSTRUCTIONS:
- First time flashing CM 7 to your Incredible S (or coming from another ROM)?
1. Root your device and install Clockwork Recovery.
2. Do a Nandroid backup!
3. WIPE (wipe data/factory reset + wipe cache partition)
5. Install the ROM
6. Optionally install the Google Addon
Please visit the CyanogenMod Wiki for step-by-step installation walkthroughs and tons of other useful information.
Thank you to EVERYONE involved in helping with testing, coding, debugging and documenting! Enjoy!
Download #146
Dev-host
Dropbox
Download Google Apps
I am NOT the Developer of this.
Mine for Mods/Links/etc.
Kernels:
lordmodUEv8.5-CFS-VIVO-2.0
https://www.dropbox.com/s/pg3czxsrdguq8hd/lordmodUEv8.5-CFS-VIVO-2.0.zip
Click to expand...
Click to collapse
Enki-v0
https://www.dropbox.com/s/qosutxslsogiqz1/Enki-v0.zip
Click to expand...
Click to collapse
Tiamat_IncS-v1.1.5
http://downloads.tiamat-dev.com/7x30/115/Tiamat_IncS-v1.1.5.zip
Click to expand...
Click to collapse
Mate you should upload it to dev host or something because if to much traffic gets into your dropbox they may suspend your account for a bit
Sent from my Venomous ViperVIVO
markj338 said:
Mate you should upload it to dev host or something because if to much traffic gets into your dropbox they may suspend your account for a bit
Sent from my Venomous ViperVIVO
Click to expand...
Click to collapse
I really tried yesterday, but without success. I'm waiting now for school, wanna try a url remote upload
Sent from my HTC Incredible S using xda app-developers app
Just flashed this but sadly still no backlights two stable versions and this. Its a shame
Sent from my Incredible S using xda app-developers app
thanks a lot buddy for the upload ... :good:
i wanna ask u something.
i tried the official CM 7.2 build but the camera was soo damn laggy !
can u confirm me that this build has the perfect camera as we gt it while using on SENSE roms ?
if the camera is wrking fine ... den m gonna move ahead and ll download it !
neelgangrade said:
thanks a lot buddy for the upload ... :good:
i wanna ask u something.
i tried the official CM 7.2 build but the camera was soo damn laggy !
can u confirm me that this build has the perfect camera as we gt it while using on SENSE roms ?
if the camera is wrking fine ... den m gonna move ahead and ll download it !
Click to expand...
Click to collapse
It is not *perfect* but it is better imo than on AOSP ICS.
Try a different kernel, that may help. But I found that in low-lowish light the camera had a REALLY low framerate.
The explanation is that the phone is trying to capture as much light as possible, while sacrificing framerate
markj338 said:
It is not *perfect* but it is better imo than on AOSP ICS.
Try a different kernel, that may help. But I found that in low-lowish light the camera had a REALLY low framerate.
The explanation is that the phone is trying to capture as much light as possible, while sacrificing framerate
Click to expand...
Click to collapse
thanks man ! :good:
firescotti255 said:
Just flashed this but sadly still no backlights two stable versions and this. Its a shame
Sent from my Incredible S using xda app-developers app
Click to expand...
Click to collapse
Does your backlight work on sense ROM?
Sent from my HTC Wildfire S A510e using xda app-developers app
Yep, also on paranoid android, sense lite and others.
Sent from my Incredible S using xda app-developers app
Mhm, maybe you can find a backlight fix on xda... Have you auto brightness toggled on?
Sent from my vivo using xda app-developers app
If i touch the brightness or switch from auto it comes on, but never preeminently
Sent from my Incredible S using xda app-developers app
AOIP CE HAS BEEN DISCONTIUNED THE INSTALLER SOURCE CAN STILL BE FOUND IN DOWNLOADS !!!
Gift Of Development APPS aka G.O.D APPS (codename CE Project 2)
Description:
GUI Based Installer for individual installation including inverted. remove or install ES File Explorer, Youtube, Skype, Greenify, Google Drive, Adblock, apex, nova, titanium backup, chrome, others i may have forgot to mention. Later on when project ION is ready this will be required as features based specifically for it will be added in but will remain optional like everything else is in this app. Currently only for 4.4.2 at the moment. Requests for additional apps added will be done based on most request first.
Downloads:
GOD_APPS_v1b Happy New Year !!!
Archive:
IAOIP CE PreBeta Installer Source.zip
Installation
Install at your own risk
- Flashing G.O.D APPS to your Galaxy Exhibit (or coming from another ROM)?
Reboot into at least ClockworkMod Recovery 6.0.4.4 using 3-button-combo, or TWRP 2.6.3.0
Flash your favorite 4.4.2 rom
Flash G.O.D APPS
Follow Onscreen Instuctions.
Done if you did the reboot option at the end
Known Issues
Report Any but shouldn't be with the exception of inverted apps not working. It will be fixed in next build.
Changelog
v1 Beta - Initial Eelease
Credits
TripFX
jfbs (for Updated Roms and Recoverys)
amarullz ( Aroma )
xda community
anyone else I might have forgot plz pm me and ill fix it.
Reserved
Reserved
Reserved
Reserved as well
Thanks will give it a try
Sent from my SGH-T679 using XDA Premium 4 mobile app
Just installed it. The benchmarks seem promising, haha!
Doesn't seem like the bluetooth is working. I'll keep testing and see if something else isn't working.
Oh, I was running OC at 1708MHz. I'm trying out 1804MHz now. At 1881MHz it freezes my phone
Which kernel are you using.
Sent from my SGH-T679 using xda app-developers app
TripFX said:
Which kernel are you using.
Sent from my SGH-T679 using xda app-developers app
Click to expand...
Click to collapse
The one that had "(Recommended)" next to it.
I guess going to 1804MHz doesn't freeze at first, but once I put it to heavy use it freezes.
The I/O scheduler only can set to ROW. I cant set it to anything else.
The only problems I noticed so far are the bluetooth, I/O scheduler, and the video camera that came with the KitKat launcher ( I was kinda expecting that), but the stock camera app works fine.
Very fast and snappy rom. I will probably probably use it day to day till a more stable 4.4 comes out.
Good job dude!
WiFi is broken for me, did all the wipes. Thanks
Sent from my SGH-T679 using XDA Premium 4 mobile app
Bad news is my hard drive took a crap today. Good news is all my work is backed up. So it will be about a week before I can continue my work. Between ordering and shipping. But please keep reporting bugs. Also you shouldn't be able to overclock more than 1.4ghz as I have yet to release my own kernel and never touched cams kernels
Sent from my SGH-T679 using xda app-developers app
Work has begun again
Sent from my SGH-T679 using xda app-developers app
TripFX said:
Work has begun again
Sent from my SGH-T679 using xda app-developers app
Click to expand...
Click to collapse
Nice to have ya back
I get a slight problem sometimes after I flash a different ROM then go back to this one, it won't boot up. Not sure if its from the previous ROM (its just been the 4.4 rom ive been switching back n fourth with), or another matter.
I get it to boot up again after retrying a few times, but not sure what the problem is. Maybe the installation option.
Doobski said:
Nice to have ya back
I get a slight problem sometimes after I flash a different ROM then go back to this one, it won't boot up. Not sure if its from the previous ROM (its just been the 4.4 rom ive been switching back n fourth with), or another matter.
I get it to boot up again after retrying a few times, but not sure what the problem is. Maybe the installation option.
Click to expand...
Click to collapse
do you wipe before flashes or do you dirty flash
det0xx said:
do you wipe before flashes or do you dirty flash
Click to expand...
Click to collapse
Dalvik, cache, data, and tried system before as well
I believe what's causing all the problems is the permissions. Beta will be a major improvement over prebeta, as in my free time when all I had was just my phone I was doing some heavily studying up on aroma. Not good giving an ETA but CE Project 2 beta will be released along side AOIP CE BETA. So it will be a dual release. Note CE Project 2 is NOT project ION. If it was then I would've referred it as that and not CE Project 2.
Sent from my SGH-T679 using xda app-developers app
What will the difference between the 2 be?
Sent from my SGH-T679 using XDA Premium 4 mobile app
Good to see there is still activity on this phone. Am trying to fix my exhibit so that I can go back to flashing Roms.
Is there a reason why you have this thread on the general forum instead of development?
Sent from my Nexus 5 using xda app-developers app
TripFX said:
Work has begun again
Sent from my SGH-T679 using xda app-developers app
Click to expand...
Click to collapse
I want to add my verbal support for this project as well. I think AOIP 8/10/2013 is currently the best ROM that I have encountered for this phone thus far. The AOIP 2.0 builds had nicer features, but they weren't as stable as the 8/10/2013. An improved version of AOIP 8/10/2013 would be awesome and that sounds like what you are attempting to do. So, thanks!
AOIP CE is just hold people over for now and give a users a feel of what's to come. CE 2 is ROM independent but will also be required later on for project ion features. Once betas start rolling out it may move over to the dev thread but since is prebeta its here for the time being. Ya the 8/10 aoip is the best which is why I used that.
Sent from my SGH-T679 using xda app-developers app
Do you want or need help with anything?
jfbs said:
Do you want or need help with anything?
Click to expand...
Click to collapse
Im good. just slow after a dog bite on my arm. can only type one handed at the moment but still progressing. A release is still coming. AOIP CE is on hold. CE Project 2 is what im working on now as its universal and will work for your rom and it seems most have already moved on from AOIP and this phone. So depending on how the new year goes i may or may not release beta of AOIP CE and just focus on CE Project 2 and ION Project. Im hoping to have CE2 beta ready by the 1st and so far it looks like I'm right on schedule. Testing everything as I go so it won;t be nearly as bad of a release as CE1 prebeta. BTW how are you doing with getting ION running. Obviously things will be broken.
I'm gonna be that guy though, can anyone give me a link to aaarghhh's kernel for our device for cm11? I've searched a bunch and just can't find it... I've found the flashable for other devices and other versions but not the atrix and not cm11. Thanks
Sent from my MB886 using XDA Premium 4 mobile app
I'm using the Validus13 custom 4.4.2 rom which is based on CM. In build 3.0, "arrrghhh kernel no longer included due to version incompatibilities". See the changelog here: http://forum.xda-developers.com/showthread.php?t=2564418
Not sure if it was removed only from the Validus13 ROM or other CM11-based roms too.
metalmike6 said:
I'm gonna be that guy though, can anyone give me a link to aaarghhh's kernel for our device for cm11? I've searched a bunch and just can't find it... I've found the flashable for other devices and other versions but not the atrix and not cm11. Thanks
Sent from my MB886 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Use the one for the razr hd xt925. I cannot provide a link for it.
I've just installed arrrghhh's kernel on my phone, which is running the 12/25 nightly of CM11. So far, things seem pretty stable. I read about issues with the battery calibration on CM11, but according to arrrghhh, it seemed to be CM's fault. It looks like it's measuring the battery fine though, and I've overclocked to 1.8 GHz and lowered the minimum frequency to 96 MHz just fine
Here's the link to the thread on the Photon Q forum (it works on all devices running the Photon's SoC, including the Atrix HD): http://forum.xda-developers.com/showthread.php?p=31717152#post31717152
The link should send you to post #5, just click on the blue CM11 link to download.
This is awesome info. Thanks a bunch guys
Sent from my MB886 using XDA Premium 4 mobile app
So a strange issue... I installed the kernel. And all lag is officially gone. Its awesome. But, I've lost my battery stats? Literally all references to my battery percentage are gone? Weirdest thing I've encountered as of yet.
Sent from my MB886 using XDA Premium 4 mobile app
metalmike6 said:
So a strange issue... I installed the kernel. And all lag is officially gone. Its awesome. But, I've lost my battery stats? Literally all references to my battery percentage are gone? Weirdest thing I've encountered as of yet.
Sent from my MB886 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
That was the issue that I read about on the thread...
I don't have this issue, but I installed this kernel on the 12/25 CM11 nightly. If you're running a rom that is CM based, it probably doesn't have the latest commits from the later CM11 nightlies fixing this issue. If you're not running a nightly/running an older nightly, try installing the latest one and see if that fixes your issue. If you're already on a new nightly though, I don't know what to say..
On the 12/17 nightly I'll give the latest a download and dirty flash it, along with reflashing arrrghhh to see if that fixes it. I'll report back with results for anyone else having the issue in the future. Thanks for the continued responses man. Very helpful.
Sent from my MB886 using XDA Premium 4 mobile app
Just dirty flashed the nightly and reflashed aaarghhh... Perfection so far. Battery stats are back and smooth as silk running 1.89ghz ondemand/noop. Love this phone
Sent from my MB886 using XDA Premium 4 mobile app
metalmike6 said:
Just dirty flashed the nightly and reflashed aaarghhh... Perfection so far. Battery stats are back and smooth as silk running 1.89ghz ondemand/noop. Love this phone
Sent from my MB886 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I'm new to the whole kernel thing but I feel stupid for asking this.. My battery is doing what yours was. I have the 2-21-2014 kernel and I can't figure out how to fix my situation, it's quite annoying.. I would be very grateful for some help.. Thank you.
- SinfullHero
This is a port of the awesome mokee os ROM I put together for myself and figured I'd share since the mokee os team has yet to release for the vzw g2
The main thread for the team on the g2 forum is here: http://forum.xda-developers.com/showthread.php?t=2624235. check it out for more info on the ROM. Specifically, this is a port of the d800 version where I changed some things around just to get it to flash. The real heavy lifting is done by dr87's awesome vs980 patch from the also awesome mahdi ROM thread. So go thank him, savoca, (for furnace kernel) and ryuinferno (the mokee g2 maintainer) for all their work for our community. Also I'm no dev so I obviously can't provide support or what not, and don't crowd up the devs threads with support questions as they don't support our phone. so basically this is provided as is. Also if anyone wants a different ROM ported to the vs980 just pm me and I'll give it a shot. Anyways on to the deets.
Install instructions:
wipe everything. system,cache,dalvik and data 3x
Flash ROM.
Flash gapps (optional)
Flash vs980 patch
Flash vs980 kernel (I used furnace kernel. Also idk if this is necessary but I did it just to be safe.)edit: it is required for odex builds
Profit.
Bugs: for now it says d800, I may fix it next time but it doesn't hurt nothing. (fixed i think someone wanna confirm?)
Do not use the in ROM ota update.
It says tcdma 64
If you have rotation issues download the fix from my drive then boot to recovery and flash the fix then reflash your kernel of choice (credit tangjun269)
What ever bugs mokee has
Other?
Download link: https://docs.google.com/folder/d/0B0lbyXDReetfSVh5MFA2M3RyMGs/edit
Might be missing something, but I don't see the ROM? Unless its probam?
Sent From My Vs980
blazewit said:
This is a port of the awesome mokee os ROM I put together for myself and figured I'd share since the mokee os team has yet to release for the vzw g2
The main thread for the team on the g2 forum is here: http://forum.xda-developers.com/showthread.php?t=2624235. check it out for more info on the ROM. Specifically, this is a port of the d800 version where I changed some things around just to get it to flash. The real heavy lifting is done by dr87's awesome vs980 patch from the also awesome mahdi ROM thread. So go thank him, savoca, (for furnace kernel) and ryuinferno (the mokee g2 maintainer) for all their work for our community. Also I'm no dev so I obviously can't provide support or what not, and don't crowd up the devs threads with support questions as they don't support our phone. so basically this is provided as is. Also if anyone wants a different ROM ported to the vs980 just pm me and I'll give it a shot. Anyways on to the deets.
Install instructions:
wipe everything.
Flash ROM.
Flash patch
Flash vs980 kernel (I used furnace kernel. Also idk if this is necessary but I did it just to be safe.)
Profit.
Bugs: for now it says d800, I may fix it next time but it doesn't hurt nothing. (fixed i think someone wanna confirm?)
Do not use the in ROM ota update.
It says tcdma 64
What ever bugs mokee has
Other?
Download link: https://docs.google.com/folder/d/0B0lbyXDReetfSVh5MFA2M3RyMGs/edit
Click to expand...
Click to collapse
Is it the probam
Sent from my LG-VS980 using XDA Premium 4 mobile app
Lawlrus said:
Might be missing something, but I don't see the ROM? Unless its probam?
Sent From My Vs980
Click to expand...
Click to collapse
rayraycarter4 said:
Is it the probam
Sent from my LG-VS980 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Your right the upload some how got paused. Should be done in a few mins, my fault
Lawlrus said:
Might be missing something, but I don't see the ROM? Unless its probam?
Sent From My Vs980
Click to expand...
Click to collapse
rayraycarter4 said:
Is it the probam
Sent from my LG-VS980 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Should b ready now
Gapps?
Sent from my LG-VS980 using XDA Premium 4 mobile app
rayraycarter4 said:
Gapps?
Sent from my LG-VS980 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Use whatever you want. They are gapps lol
Sent From My Vs980
Okay thanks
Sent from my LG-VS980 using XDA Premium 4 mobile app
rayraycarter4 said:
Gapps?
Sent from my LG-VS980 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I used the pa modular mini zip although u can use any u like. but fyi this ROM doesn't have trds so slim gapps are kinda pointless
Oh if anyone has the bug where after your done w a call and pull it from your ear the screen won't turn back on this ROM has a setting in display that will turn the screen on when the phone hangs up. It actually works decently well, idk why every aosp ROM doesn't have that feature cuz so many of em have that bug on the g2
Orientation isn't right
Sent from my LG-VS980 using XDA Premium 4 mobile app
rayraycarter4 said:
Orientation isn't right
Sent from my LG-VS980 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It was fine for me, did u come to mokee from one of the flex roms? I no i had issues w rotation after coming from rayglobe when i was on twrp. I think it may have something to do with twrp not wiping completely, u may wanna try phillz then if u still have it try flashing a different vs980 aosp rom then wipe n flash mokee again
blazewit said:
It was fine for me, did u come to mokee from one of the flex roms? I no i had issues w rotation after coming from rayglobe when i was on twrp. I think it may have something to do with twrp not wiping completely, u may wanna try phillz then if u still have it try flashing a different vs980 aosp rom then wipe n flash mokee again
Click to expand...
Click to collapse
I came from a different aosp rom and I clean flashed it twice
Sent from my VS980 4G using XDA Premium 4 mobile app
rayraycarter4 said:
I came from a different aosp rom and I clean flashed it twice
Sent from my VS980 4G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Im gonna be uploading an update today so I'll try to figure out why you are getting the rotation bug still, cuz the patch file is supposed to fix that
blazewit said:
Im gonna be uploading an update today so I'll try to figure out why you are getting the rotation bug still, cuz the patch file is supposed to fix that
Click to expand...
Click to collapse
Okay cool
rayraycarter4 said:
Okay cool
Click to expand...
Click to collapse
Update is live
I'm about to install will check back in a few
Sent from my VS980 4G using XDA Premium 4 mobile app
blazewit said:
Update is live
Click to expand...
Click to collapse
I have trying to port this to ls980 how did you port this i got it to boot but systemiui would stop working
Thanks
Sent from my LG-LS980 using xda premium
mchlbenner said:
I have trying to port this to ls980 how did you port this i got it to boot but systemiui would stop working
Thanks
Sent from my LG-LS980 using xda premium
Click to expand...
Click to collapse
All I did is to take a d802 build, unzip it, change out the boot IMG to your model, edit the updater script and build prop to include your model number then rezip so it'll flash correctly, then download your device specific patch from one of dr87's ROM threads, then flash the ROM, gapps, the patch, then your kernel of choice. The patch that dr87 made is really just a script that injects all the variant specific stuff into the ROM so u can fairly easily just include it yourself but the script works well so I didn't bother.
Landscape Hell
I installed this last night and I was really liking it BUT every app/new window I opened was in landscape mode .... the home screen was the only thing that remained in proper portrait mode ... even the MK set-upo screen is in landscape ... I could not find a way to stop this annoying feature so I bailed on it .... if the screen orientation would just behave properly, I would be much happier to try it as a DD but constant landscape mode sucks BIG TIME .... any one, any one ???
***: PM sent blazewit