Database Develop

USB is not working after S-OFF

so, i decided to s-off my htc one using revone, i was on ARHD 11.5 ant the time... it all went well! until i found that every time i plug it in to my pc, it wont connect nor will it charge! i can charge it from the wall, but the only way to go that is to restart the phone whilst the cable is plugged in.
Even after restarting the phone when i try to plug it into my PC it launches the car app on the phone, connects to my pc for 5 seconds then it all just crashes! What im guessing is that it thinks that my pc is some sort of car dock? and it says it unsupported.
In terms of solutions:
i have tried going back to s-on
tried using ruu's and various custom roms
even re s-off the device!
countless hours have been spent scouring the internet for solutions and trying some myself before posting.
UPDATED:
This Is now my current state:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA33VW905558
(bootloader) imei: 354436050530680
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4196mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.063s
Thank you to all help

What happens on a different PC?

try
fastboot oem enableqxdm 0

EddyOS said:
What happens on a different PC?
Click to expand...
Click to collapse
Same thing!
dburg84 said:
try
fastboot oem enableqxdm 0
Click to expand...
Click to collapse
no luck thanks for the suggestion

tobyman2 said:
Same thing!
no luck thanks for the suggestion
Click to expand...
Click to collapse
Try updating your firmware and rom. You're on a really old base.

iElvis said:
Try updating your firmware and rom. You're on a really old base.
Click to expand...
Click to collapse
Im back on ARHD 12 (with the latest base (JB 4.2.2/2.24.401.1)). i just went through the ones for my region to see if they would work, the one posted is the lowest one i was on, but still no luck! thanks anyway.

tobyman2 said:
Im back on ARHD 12 (with the latest base (JB 4.2.2/2.24.401.1)). i just went through the ones for my region to see if they would work, the one posted is the lowest one i was on, but still no luck! thanks anyway.
Click to expand...
Click to collapse
Did you try a different cable? I think the problem is either your cable or the microUSB port. Triggering dock mode suggests you've got a bad connection somewhere.

iElvis said:
Did you try a different cable? I think the problem is either your cable or the microUSB port. Triggering dock mode suggests you've got a bad connection somewhere.
Click to expand...
Click to collapse
hahaha, i think this may have solved it! i dug up an micro usb cable, when i plug it in, it says slow charging and it doesnt allow data transfer, but i think it came as just a charger for some battery pack! i will go and buy a replacement tomorrow! thank you!

tobyman2 said:
hahaha, i think this may have solved it! i dug up an micro usb cable, when i plug it in, it says slow charging and it doesnt allow data transfer, but i think it came as just a charger for some battery pack! i will go and buy a replacement tomorrow! thank you!
Click to expand...
Click to collapse
As said, update your firmware base using the firmware package on the insertcoin website. Your device is still on 1.20.401.1 which wasn't even on the first phone to be released (or if it was it was quickly updated!)

EddyOS said:
As said, update your firmware base using the firmware package on the insertcoin website. Your device is still on 1.20.401.1 which wasn't even on the first phone to be released (or if it was it was quickly updated!)
Click to expand...
Click to collapse
Yeah, I have! I'm on the latest arhd 12. But I haven't manually updated the firmware. Is it compulsory, I thought you could just flash 2.24.401.1 like a regular ROM

tobyman2 said:
Yeah, I have! I'm on the latest arhd 12. But I haven't manually updated the firmware. Is it compulsory, I thought you could just flash 2.24.401.1 like a regular ROM
Click to expand...
Click to collapse
You can but it might be the cause of the USB not working

tobyman2 said:
Yeah, I have! I'm on the latest arhd 12. But I haven't manually updated the firmware. Is it compulsory, I thought you could just flash 2.24.401.1 like a regular ROM
Click to expand...
Click to collapse
Just update it. There are lots of fixes included such as better touch and a newer radio etc.

EddyOS said:
You can but it might be the cause of the USB not working
Click to expand...
Click to collapse
proctologist said:
Just update it. There are lots of fixes included such as better touch and a newer radio etc.
Click to expand...
Click to collapse
I have just flashed the firmware still no luck. Im downloading insertcoin rom now though, see if anything happens there!

i have the exaclty same issue as you,only charges from wall charger, something makes me weird,tries to enter fastboot mode from the bootloader, at least I can transfer my files via fastboot and use the official RUU- commands like , fastboot flash recovery ,etc etc. I'm from the debate if physical damage or software, it is worth mentioning that I Use revone for S-OFF my htc one m7, and since renove is a early alpha version ,can corrupt any partition with usb stuff like drivers or something like this?

Phone is soft bricked, attempts to fix haven't work

Yesterday, I attempted to install a new rom. I had been using CM11 nightlies up till this point, and after being annoyed about certain aspects of my phone not working. I wanted to try something new.
I found ViperOne, and went to install it, thinking that it'll be the standard, run-of-the-mill install with no problems to be had. After getting through the install procedure and attempting to reboot to system, my phone dropped me back off at the bootloader. Thinking that I had forgotten to wipe something, I went into the recovery, wiped data, dalvik cache, and the cache, and attempted the install again. Once again, my phone dropped me off at the bootloader.
I thought, maybe I had a bad download. Re-downloaded the rom, same result. "Oh, I'll just try something else then". I found a Google Play Edition rom for my device, and decided to try that. It got stuck in a bootloop. After some googling, I attempted wiping the data/cache/dalvik cache again hoping it would help. Nope, still stuck in bootloop.
At this point (and after having running into a very similiar situation before) I decided to go for broke. I did a full wipe of the phone, and sideloaded CM10.1.3 (only stable CM rom for this device afaik). As it was installing, I noticed an error. "Unable to mount /data". I've had this problem before, and the way I fixed it last time was to install and run a stock rom. At this point in time, I was also getting frustrated and decided to put the stock rom back on my phone so it would at least be functional.
I found a stock rom and installed it just fine. The phone didn't even get stuck in a bootloop either. However, once the phone had finally booted up, I found that the touchscreen was unresponsive. I remember having this issue the last time I tried to use a stock rom. After a little bit of research, I had found that the problem stems from installing the wrong version of the rom. It was suggested on one of the websites to put "fastboot getvar version-main" into adb to find out what version I needed. It returns "version-main: ".
It was at this point that I remembered that I had made a backup of my phone before I attempted rooting. After some searching around, I managed to find it. That being said, I have no idea what to do with it. The folder where I made the backup contains a handful of .win files and some md5 checksums.
Since then I have been attempting seemingly random RUU versions in hopes of stumbling across the right one. It's been 5 hours, and I haven't had any success.
I would greatly appreciate any and all help that can be provided. If you guys need additional information (I'm not sure what I should include), let me know. I know some of the more basic ADB commands and their functions, so bear with me if I ask some questions about how to do certain things.

Boot into bootloader/fastbootusb and type the below command and post the readout here.
fastboot getvar all

BD619 said:
Boot into bootloader/fastbootusb and type the below command and post the readout here.
fastboot getvar all
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid:
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4323mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-005bf6a40e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

You can try one of the RUU's found here or follow the guide
Sidenote: don't use the 4.06.651.4 RUU unless you flash the 4.06.651.4 s-on firmware first.
BTW I removed
serialno:
imei:
meid:

BD619 said:
You can try one of the RUU's found here or follow the guide
Sidenote: don't use the 4.06.651.4 RUU unless you flash the 4.06.651.4 s-on firmware first.
Click to expand...
Click to collapse
I've tried several different RUU's, including the one's I could find here, and none of them have worked. Not sure if it really matters, but I attempted the 4.06.651.4 RUU earlier, but it failed.
BD619 said:
BTW I removed
serialno:
imei:
meid:
Click to expand...
Click to collapse
Why shouldn't those be shared? Are they considered sensitive information?

Ooops for got the link
http://forum.xda-developers.com/showthread.php?t=2503646
Yes they could be considered sensitive.

BD619 said:
Yes they could be considered sensitive.
Click to expand...
Click to collapse
I have no idea what those numbers represent. Why are important?

crazy-asian said:
I have no idea what those numbers represent. Why are important?
Click to expand...
Click to collapse
I have always been told not to include those...could be a way for someone to hack your device but that's just my guess.
http://en.wikipedia.org/wiki/Mobile_equipment_identifier

I had this happen to me also. Ends up i had to flash a new firmware on the phone and it booted right up. Also make sure you are using twrp recovery when you flash this rom. I used cwm and think that is where all my problems started. Hope ya get it worked out and may not be your problem but is exactly what happened to me and have i fixed it.

BD619 said:
http://forum.xda-developers.com/showthread.php?t=2503646
Click to expand...
Click to collapse
I had tried all but one of those in that list. That one that I hadn't used yet appears to be working. Thank you so much for the help.

Oh god, now I'm back on the stock rom... Any recommendations for a good rom? I enjoy the stock look and feel of android, but running the CM nightlies has been giving me a headache.

crazy-asian said:
Oh god, now I'm back on the stock rom... Any recommendations for a good rom? I enjoy the stock look and feel of android, but running the CM nightlies has been giving me a headache.
Click to expand...
Click to collapse
I'm running BadSeed Sixth Sense
But it's all personal preference everyone will have a different opinion.

Fastboot, on the phone side, isn't connecting to my computer.

crazy-asian said:
Fastboot, on the phone side, isn't connecting to my computer.
Click to expand...
Click to collapse
Are you in bootloader?

BD619 said:
Are you in bootloader?
Click to expand...
Click to collapse
Yes, and it is in fastboot mode.

crazy-asian said:
Yes, and it is in fastboot mode.
Click to expand...
Click to collapse
When you type fastoot devices you don't get a response?

BD619 said:
When you type fastoot devices you don't get a response?
Click to expand...
Click to collapse
correct

crazy-asian said:
correct
Click to expand...
Click to collapse
Ok go back to my guide and you can get the proper drivers and instructions to get them installed correctly

BD619 said:
Ok go back to my guide and you can get the proper drivers and instructions to get them installed correctly
Click to expand...
Click to collapse
Didn't solve the problem, phone still isn't in "fastboot USB"

crazy-asian said:
Didn't solve the problem
Click to expand...
Click to collapse
Try a different port(usb2 are best)
Try a different cable
Different PC
If you have android sdk setup try updating it.

[Q] HTC One M7 firmware help!

Hey guys,
Sorry if I am in the wrong place for this question but I am completely stuck. I recently bought a HTC One M7 which was rooted. I did not know this when I was buying it. The new update came out and my phone asked me to update. I hit yes. My phone switched off and didn't come back on. After extensive research I got it back on to find the following:
1) It was rooted
2)Bootloader started up and TWRP is on the phone
3) There is now nothing on the phone. No firmware or packages at all
4) When I try to flash anything I get the error message: can't mount to system. I can mount to everything else ok just not internal storage.
I am unsure what recovery image and RUU to use. The phone (I was told was unlocked) was O2(Giffgaff).
Details are:
***Tampered***
***Unlocked***
M7_UL PVT SHIP S-ON RH
HBOOT-1.55.0000
Radio-4A.21.3263.04
OpenDSP-v32.120.724.0909
OS-3.62.206.1
eMMC-boot 2048MB
Oct 18 2013, 00:29:38. 0
IMAGE CRC
rpm: 0xC5567FC
sbl1: 0x9FE7A28C
sbl2: 0XA915A4DD
sbl3: 0xB221B6BB
tz: 0XCCD5DF62
radio: 0XEFA42613
hboot: 0xC174663B
boot: 0x94C89910
recovery: 0x59BF6CD
system: 0xFF83AB1
Any help at this stage would be greatly appreciated! I am about to just give up and bin it...
Thanks in advance!

When does it fail mounting system? When flashing a ROM in TWRP or flashing an RUU?

aooga said:
When does it fail mounting system? When flashing a ROM in TWRP or flashing an RUU?
Click to expand...
Click to collapse
it seems to be both. I try to flash RUU via fastboot and I get a signature fail. So I try to flash a ROM to the phone and it says failed to mount system. I put the items on a usb and tried it but get an 'unable to unzip' error. Its a bit above me to be honest. Thank you so much for helping.

olimoh8464 said:
it seems to be both. I try to flash RUU via fastboot and I get a signature fail. So I try to flash a ROM to the phone and it says failed to mount system. I put the items on a usb and tried it but get an 'unable to unzip' error. Its a bit above me to be honest. Thank you so much for helping.
Click to expand...
Click to collapse
... buddy when bootloader is unlocked and phone s-on, no ruu will work. now for ruu to flash you need to relock the bootloader and then run ruu. it will surely flash :victory: ...

Devilish_Angel said:
... buddy when bootloader is unlocked and phone s-on, no ruu will work. now for ruu to flash you need to relock the bootloader and then run ruu. it will surely flash :victory: ...
Click to expand...
Click to collapse
When you say run the RUU to you mean the RUU from the desktop or directly from the phone? How do I know if I have the correct RUU? the closest one I could find was for O2 and the radio was the same down to the last digit being different. Sorry for sounding stupid but it is a lot to take in for such a noob. I read that I need to flash a boot recovery image and then run the RUU is that right?

olimoh8464 said:
When you say run the RUU to you mean the RUU from the desktop or directly from the phone? How do I know if I have the correct RUU? the closest one I could find was for O2 and the radio was the same down to the last digit being different. Sorry for sounding stupid but it is a lot to take in for such a noob. I read that I need to flash a boot recovery image and then run the RUU is that right?
Click to expand...
Click to collapse
... run it from desktop while phone in bootloader. no need to run boot image ...

olimoh8464 said:
When you say run the RUU to you mean the RUU from the desktop or directly from the phone? How do I know if I have the correct RUU? the closest one I could find was for O2 and the radio was the same down to the last digit being different. Sorry for sounding stupid but it is a lot to take in for such a noob. I read that I need to flash a boot recovery image and then run the RUU is that right?
Click to expand...
Click to collapse
RUU must match your CID number.
I add you here link to a good thread:
http://forum.xda-developers.com/showthread.php?t=2358738
tetakpatalked from Nexus 7 flo

Devilish_Angel said:
... buddy when bootloader is unlocked and phone s-on, no ruu will work. now for ruu to flash you need to relock the bootloader and then run ruu. it will surely flash :victory: ...
Click to expand...
Click to collapse
This is wrong. You can flash the ruu that mathches the cid and mid of your phone even with a locked bl.
Sent from my GT-I9505 using Tapatalk

Thank you for the advice and the link! I will go try this now and let you know how I get on!

aooga said:
This is wrong. You can flash the ruu that mathches the cid and mid of your phone even with a locked bl.
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
... did i say something different than what you are saying ...

@aooga Angel's point was S-On, I think.
tetakpatalked from the legendary i9000

olimoh8464 said:
Hey guys,
Sorry if I am in the wrong place for this question but I am completely stuck. I recently bought a HTC One M7 which was rooted. I did not know this when I was buying it. The new update came out and my phone asked me to update. I hit yes. My phone switched off and didn't come back on. After extensive research I got it back on to find the following:
1) It was rooted
2)Bootloader started up and TWRP is on the phone
3) There is now nothing on the phone. No firmware or packages at all
4) When I try to flash anything I get the error message: can't mount to system. I can mount to everything else ok just not internal storage.
I am unsure what recovery image and RUU to use. The phone (I was told was unlocked) was O2(Giffgaff).
Details are:
***Tampered***
***Unlocked***
M7_UL PVT SHIP S-ON RH
HBOOT-1.55.0000
Radio-4A.21.3263.04
OpenDSP-v32.120.724.0909
OS-3.62.206.1
eMMC-boot 2048MB
Oct 18 2013, 00:29:38. 0
IMAGE CRC
rpm: 0xC5567FC
sbl1: 0x9FE7A28C
sbl2: 0XA915A4DD
sbl3: 0xB221B6BB
tz: 0XCCD5DF62
radio: 0XEFA42613
hboot: 0xC174663B
boot: 0x94C89910
recovery: 0x59BF6CD
system: 0xFF83AB1
Any help at this stage would be greatly appreciated! I am about to just give up and bin it...
Thanks in advance!
Click to expand...
Click to collapse
Post a fastboot getvar all
RUU.exe files or ROM Update Utility files are executable files that run on Windows PC
RUU.zip files are simply the same as above but rather than using a Windows exe file to run them, they are packaged in a zip file that can be flashed in Fastboot mode
The RUU has to match your CID/MID. If your S-On, the RUU as to be same version or higher
Sent from my Nexus 7 using XDA Premium 4 mobile app

Devilish_Angel said:
... did i say something different than what you are saying ...
Click to expand...
Click to collapse
Uh..yeah. You said:
when bootloader is unlocked and phone s-on, no ruu will work
Click to expand...
Click to collapse

bored_stupid said:
Post a fastboot getvar all
RUU.exe files or ROM Update Utility files are executable files that run on Windows PC
RUU.zip files are simply the same as above but rather than using a Windows exe file to run them, they are packaged in a zip file that can be flashed in Fastboot mode
The RUU has to match your CID/MID. If your S-On, the RUU as to be same version or higher
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks! Is there any way you could tell me the correct RUU to download? I will post a fastboot getvar all after work this evening. I tried one that I thought was right but when I click to run it as administrator I get prompted with the normal are you sure? click yes and nothing happens. It just doesn't run. Tried downloading it again but still nothing. Any ideas?

olimoh8464 said:
Thanks! Is there any way you could tell me the correct RUU to download? I will post a fastboot getvar all after work this evening. I tried one that I thought was right but when I click to run it as administrator I get prompted with the normal are you sure? click yes and nothing happens. It just doesn't run. Tried downloading it again but still nothing. Any ideas?
Click to expand...
Click to collapse
Yeah no problems. Off to work myself now, but will post correct link if any and possible other solutions.
Sent from my HTC One using XDA Premium 4 mobile app

bored_stupid said:
Yeah no problems. Off to work myself now, but will post correct link if any and possible other solutions.
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
C:\Users\milo\Desktop\Newest>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.206.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA366W900013
(bootloader) imei: 3578640********
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3965mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.047s

OMG My phone literally did the same exact thing today!! I woke up, a few things were force closing so I decided that I would just reboot the phone...... Big mistake, once I did that, the phone just stayed in the booting up animation. So I figured hey what ever ill just reflash the ROM in TWRP.......Nope, couldn't boot into recovery either, the phone would flash the TWRP screen then just reset itself. Again, I thought no biggie ill just reinstall TWRP. This (again) proved to be useless, after multiple (successful) install's the phone still refused to boot into TWRP. So I finally got CWM to install, a noticed a few things at the bottom of the screen about something not being mounted properly, I didn't pay that much attention to it, i just wanted my phone back at that point. I tried to wipe my phone for a fresh flash, but as soon as the wipe began the phone reset itself. At this point I was on the brink of throwing this thing into the torrential down-pour that god decided to place in my city.
Next I tried to install Viper ROM because I knew it had a wipe functionality built into it's Aroma installer. Went through all the checklists got to the start install screen, clicked next, and then began to wipe......... and then reset again........
So finally I got TWRP reinstalled, and go install a fresh ROM and and immediately met with a screen full of : "Unable to Mount XXXXXXX" (Picture attached). So then I figure alright well my last resort has to be to use a RUU. Found this nice little thread (http://forum.xda-developers.com/showthread.php?t=2316726) and decided to use the FUU (4.19.401.11 Full Wipe). Unfortunately all that did was move my HBoot from 1.4 (or something like that) to 1.5 (or something like that), put the tamper flag back, and bring back the annoying red text at the bottom of the phone at boot (the thing about development build, blah blah blah). I reinstalled TWRP yet again hoping for the best, but still nothing. It cant seem to mount anything (what ever that means).
So now im here, stuck using my old One X. Any suggestions or answers or criticism would be very much appreciated.
Thank you!!!!!

olimoh8464 said:
C:\Users\milo\Desktop\Newest>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.206.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA366W900013
(bootloader) imei: 3578640********
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3965mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.047s
Click to expand...
Click to collapse
This is the RUU.exe you require. Run from PC
http://www.htc1guru.com/dld/ruu_m7_..._10-38r-1157-04l_release_353143_signed_2-exe/
Sent from my HTC One using XDA Premium 4 mobile app

bored_stupid said:
This is the RUU.exe you require. Run from PC
http://www.htc1guru.com/dld/ruu_m7_..._10-38r-1157-04l_release_353143_signed_2-exe/
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks for that! I have downloaded it and tried to run it but it doesn't open? I get the loading message after I click run as administrator but nothing happens. Do I need HTC sync installed or deleted for this?
Thanks

olimoh8464 said:
Thanks for that! I have downloaded it and tried to run it but it doesn't open? I get the loading message after I click run as administrator but nothing happens. Do I need HTC sync installed or deleted for this?
Thanks
Click to expand...
Click to collapse
Did you check the MD5
4961fdbbadba53c9640f3638f56faec1
When you say nothing happens.. Doesn't it even try to run?
Sent from my HTC One using XDA Premium 4 mobile app

Stock OTA does not find updates // broken stock recovery

hey guys,
i just wanted to go back to stock with my HTC ONE. I flashed the Guru Reset M7 3.62.401.1.zip on my device but now it won't find any system updates. Also the recovery seems to be broken. Even after flashing the recovery seperatly the phone only shows a red triangle when i try to enter the stock recovery.
It also does not find any updates with the SuperCID.
Do you have any idea how to fix that?
I have the international Version of the HTC ONE.
Thanks in advance!

Fabivons said:
hey guys,
i just wanted to go back to stock with my HTC ONE. I flashed the Guru Reset M7 3.62.401.1.zip on my device but now it won't find any system updates. Also the recovery seems to be broken. Even after flashing the recovery seperatly the phone only shows a red triangle when i try to enter the stock recovery.
It also does not find any updates with the SuperCID.
Do you have any idea how to fix that?
I have the international Version of the HTC ONE.
Thanks in advance!
Click to expand...
Click to collapse
post your fastboot getvar all please without imei and serial number, be sure to remove these two items before posting, there have been a lot of users on here lately looking for replacement imei numbers etc, I just had a PM asking me for one, with that info they could clone your phone.
next, are you sure the 401 ruu is yours, that's why I want your fastboot getvar all.
are you s-off ?
the red triangle is stock recovery.
if you are s-off, change your CID back to HTC__001, super cid is not in the 401 ruu's or OTA's

Seanie280672 said:
post your fastboot getvar all please without imei and serial number, be sure to remove these two items before posting, there have been a lot of users on here lately looking for replacement imei numbers etc, I just had a PM asking me for one, with that info they could clone your phone.
next, are you sure the 401 ruu is yours, that's why I want your fastboot getvar all.
are you s-off ?
the red triangle is stock recovery.
if you are s-off, change your CID back to HTC__001, super cid is not in the 401 ruu's or OTA's
Click to expand...
Click to collapse
thanks for your quick reply!
here is my getvar:
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4T.27.3218.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: xxxxx
(bootloader) imei: xxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3741mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e02a9046
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

Fabivons said:
thanks for your quick reply!
here is my getvar:
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4T.27.3218.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: xxxxx
(bootloader) imei: xxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3741mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e02a9046
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
Why not run this RUU it should put everything to stock since you are S-OFF?

majmoz said:
Why not run this RUU it should put everything to stock since you are S-OFF?
Click to expand...
Click to collapse
thanks fpr your help!
i tried to install the RUU but "fastboot.exe" crashes during the installation :/

Fabivons said:
thanks fpr your help!
i tried to install the RUU but "fastboot.exe" crashes during the installation :/
Click to expand...
Click to collapse
What exactly do you mean ? The RUU crashes in the middle of the installation ?

raghav kapur said:
What exactly do you mean ? The RUU crashes in the middle of the installation ?
Click to expand...
Click to collapse
This is waht happens

Fabivons said:
This is waht happens
Click to expand...
Click to collapse
the text says htc_fastboot.exe doesn't work anymore

Fabivons said:
the text says htc_fastboot.exe doesn't work anymore
Click to expand...
Click to collapse
Try uninstalling and reinstalling HTC Sync drivers. Or you can also try downloading the updated Android SDK and recreate the fastboot folder

raghav kapur said:
Try uninstalling and reinstalling HTC Sync drivers. Or you can also try downloading the updated Android SDK and recreate the fastboot folder
Click to expand...
Click to collapse
didn't change a thing :/
here is what i do:
0. deactivate anti- virus/firewall
1. start the RUU.exe
2. put my phone into fastboot mode
3. connect my phone via USB 2.0
4. start the flash progress
then after a few seconds htc_fastboot. exe crashes and the programm stops

Fabivons said:
didn't change a thing :/
here is what i do:
0. deactivate anti- virus/firewall
1. start the RUU.exe
2. put my phone into fastboot mode
3. connect my phone via USB 2.0
4. start the flash progress
then after a few seconds htc_fastboot. exe crashes and the programm stops
Click to expand...
Click to collapse
Which OS are you using ?

raghav kapur said:
Which OS are you using ?
Click to expand...
Click to collapse
windows 8.1 64bit

Fabivons said:
windows 8.1 64bit
Click to expand...
Click to collapse
Dont start the RUU first. First put the phone in fastboot mode, get the getvar to check if all's in order.
Once you getvar shows, it means the device is connected. After that, try the RUU
If still no luck, use RUU.zip

raghav kapur said:
Dont start the RUU first. First put the phone in fastboot mode, get the getvar to check if all's in order.
Once you getvar shows, it means the device is connected. After that, try the RUU
If still no luck, use RUU.zip
Click to expand...
Click to collapse
again no change... it always crashes within the first second
do you think it could work on ubuntu? i have a portable version! but my linux skill is -10.. do you think you could do that via temviever?

Fabivons said:
again no change... it always crashes within the first second
do you think it could work on ubuntu? i have a portable version! but my linux skill is -10.. do you think you could do that via temviever?
Click to expand...
Click to collapse
Im not sure that the portable version will work. Because even in Vmware, i couldnt get the adb drivers to work. Live CD would be a much better option IMO

raghav kapur said:
Im not sure that the portable version will work. Because even in Vmware, i couldnt get the adb drivers to work. Live CD would be a much better option IMO
Click to expand...
Click to collapse
sounds great! ...what is a Live CD and how does it work?

Fabivons said:
sounds great! ...what is a Live CD and how does it work?
Click to expand...
Click to collapse
A live CD is basically an OS running on a USB/CD. Instead of the portable version which runs within the Windows OS, you will boot directly from the USB containing Ubuntu. Nothing will happen to your existing Windows; once you're done with the RUU flashing process, just shut down the computer and unplug the USB
To get it running, download the Ubuntu image and click Download:
http://www.ubuntu.com/download/desktop/
Then, to prepare the bootable USB stick, this link:
unetbootin.net
Download that software. Choose the correct Ubuntu version and create the stick. Once you're done/ have doubts, let me know

raghav kapur said:
A live CD is basically an OS running on a USB/CD. Instead of the portable version which runs within the Windows OS, you will boot directly from the USB containing Ubuntu. Nothing will happen to your existing Windows; once you're done with the RUU flashing process, just shut down the computer and unplug the USB
To get it running, download the Ubuntu image and click Download:
http://www.ubuntu.com/download/desktop/
Then, to prepare the bootable USB stick, this link:
unetbootin.net
Download that software. Choose the correct Ubuntu version and create the stick. Once you're done/ have doubts, let me know
Click to expand...
Click to collapse
okay i'm as good as done.. what's next? ;p

Fabivons said:
okay i'm as good as done.. what's next? ;p
Click to expand...
Click to collapse
Cool. Now, you have to change the boot priority to the USB as first booting option. If you know how to do so, then proceed
If you don't, then there are two ways to depending on the pre-installed OS on your PC
Did your computer come with Windows 8/8.1 pre-installed or did it come with Win7 or older ?

raghav kapur said:
Cool. Now, you have to change the boot priority to the USB as first booting option. If you know how to do so, then proceed
If you don't, then there are two ways to depending on the pre-installed OS on your PC
Did your computer come with Windows 8/8.1 pre-installed or did it come with Win7 or older ?
Click to expand...
Click to collapse
i know how to change the priority
it's custom built
and i first installed windows 8.1 on it.

[Q] Not getting any signal

Hi, I have been reading this forum for 2 days straight trying everything and most of the things helped but now I am stuck.
My problem: I am trying to use the phone on Bell network. No signal, GSM status : Emergency Call Only. When I select Bell from network list it tells me that the SIM does not support the Network. If I put the same SIM in another phone it works and gets network.
My phone:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.28.3218.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.06.401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: XXXXXXXXXX
(bootloader) imei: XXXXXXXXXXXXXXX
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3808mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-01dc707e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Preffered Network Type : CDMA/EvDo/GSM/WCDMA/LTE auto
CWM: M7 TWRP Nandroid Backup CID BM___001 1.29.666.5
What I did:
1) Tried the tape method in case SIM card was not making proper contact with phone pins. (Than I realized that was nonesense since the phone was detecting my contacts...)
2) Flashed new firmware (6.06.401.1 came with radios nothing changed)
3) Installed the Bell Mobility Nandroid Backup (still nothing except I can now install the Bell applications from my SIM card)
I am looking for suggestions, ideas and possibly solutions. Any help is welcome!
Finxster

finxster said:
Hi, I have been reading this forum for 2 days straight trying everything and most of the things helped but now I am stuck.
My problem: I am trying to use the phone on Bell network. No signal, GSM status : Emergency Call Only. When I select Bell from network list it tells me that the SIM does not support the Network. If I put the same SIM in another phone it works and gets network.
My phone:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.28.3218.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.06.401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: XXXXXXXXXX
(bootloader) imei: XXXXXXXXXXXXXXX
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3808mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-01dc707e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Preffered Network Type : CDMA/EvDo/GSM/WCDMA/LTE auto
CWM: M7 TWRP Nandroid Backup CID BM___001 1.29.666.5
What I did:
1) Tried the tape method in case SIM card was not making proper contact with phone pins. (Than I realized that was nonesense since the phone was detecting my contacts...)
2) Flashed new firmware (6.06.401.1 came with radios nothing changed)
3) Installed the Bell Mobility Nandroid Backup (still nothing except I can now install the Bell applications from my SIM card)
I am looking for suggestions, ideas and possibly solutions. Any help is welcome!
Finxster
Click to expand...
Click to collapse
have you tried another sim in the HTC connected to a GSM network, I have a suspicious feeling you have a GSM phone there and Bell requires a CDMA phone, completely different partition layout.

Seanie280672 said:
have you tried another sim in the HTC connected to a GSM network, I have a suspicious feeling you have a GSM phone there and Bell requires a CDMA phone, completely different partition layout.
Click to expand...
Click to collapse
I tried Rogers SIM and it worked one shot.

finxster said:
I tried Rogers SIM and it worked one shot.
Click to expand...
Click to collapse
also, another thing ive noticed, is the firmware you flashed is a 401 firmware, thats WWE Europe, not 100% sure if that maybe at fault
I believe someone recently had success flashing developer edition firmware and RUU on their device and they were on Bell.
I'll see if I can find the thread, EDIT: http://forum.xda-developers.com/htc-one/help/dpes-developers-edition-canada-t2851008
Its got to worth a try, and easy to do as your s-off.

Seanie280672 said:
also, another thing ive noticed, is the firmware you flashed is a 401 firmware, thats WWE Europe, not 100% sure if that maybe at fault
I believe someone recently had success flashing developer edition firmware and RUU on their device and they were on Bell.
I'll see if I can find the thread, EDIT: http://forum.xda-developers.com/htc-one/help/dpes-developers-edition-canada-t2851008
Its got to worth a try, and easy to do as your s-off.
Click to expand...
Click to collapse
Oh dayum that was fast. I am going to try it now and get back to you with results.
Crossing fingers, toes and everything else....
dam harf to ttpe lije ths...
uncrossing fingers....
BRB
EDIT: Changed CID, MID is the same... downloading firmware
EDIT2: Flashed firmware downloading RUU
sidequestion: the RUU name is RUU M7 UL K44 SENSE55 MR BrightstarUS WWE 4.19.1540.9 Radio 4A.23.3263.28 10.38r.1157.04L Release 353887 Signed 3... wouldn't that also be Europe specific @Seanie280672?
Also, I see my HBOOT is now 1.56...

finxster said:
Oh dayum that was fast. I am going to try it now and get back to you with results.
Crossing fingers, toes and everything else....
dam harf to ttpe lije ths...
uncrossing fingers....
BRB
EDIT: Changed CID, MID is the same... downloading firmware
EDIT2: Flashed firmware downloading RUU
Click to expand...
Click to collapse
be sure to check the MD5 and file size of the RUU before flashing, and if the download is a little slow, you can try this link instead, same RUU:
http://androidruu.com/getdownload.p...8_10.38r.1157.04L_release_353887_signed_3.exe
no, WWE means world wide English.

Seanie280672 said:
be sure to check the MD5 and file size of the RUU before flashing
Click to expand...
Click to collapse
File size is 1.5 gb.... How do I check MD5?

finxster said:
File size is 1.5 gb.... How do I check MD5?
Click to expand...
Click to collapse
MD5 Check http://forum.xda-developers.com/showthread.php?t=1135620
i'll keep my fingers crossed for you :fingers-crossed:

Seanie280672 said:
i'll keep my fingers crossed for you :fingers-crossed:
Click to expand...
Click to collapse
They match!
noob question here... What is the command for fastboot to run an exe?
Nvm... >.> figured it out...

finxster said:
They match!
noob question here... What is the command for fastboot to run an exe?
Click to expand...
Click to collapse
there isn't one.
plug your phone into the computer and make sure it says fastboot USB on the screen, then double click the RUU.exe file and it will launch, follow the on screen instructions, flashing takes quite a while, about 10 mins I think mine took, and at points it will look like its stuck, not very reassuring I know, it got stuck at 5% for me and then suddenly jumped to 95%, then seemed to sit there forever until it finally completed.
EDIT: is your Bell sim still in the phone ?

@Seanie280672 Yep bell sim still in phone. Installing now

finxster said:
@Seanie280672 Yep bell sim still in phone. Installing now
Click to expand...
Click to collapse
good, because during set-up it should detect your sim and ask you to select your operator, im hoping Bell is in the list.

Seanie280672 said:
good, because during set-up it should detect your sim and ask you to select your operator, im hoping Bell is in the list.
Click to expand...
Click to collapse
It prepared installation and when I agreed and clicked next... it closed... I was running it as admin....

finxster said:
It prepared installation and when I agreed and clicked next... it closed... I was running it as admin....
Click to expand...
Click to collapse
damn, I had that problem once, its not the RUU at fault, its your computer, this is how I fixed it, its a bit long winded and you have to restart your computer after each installation, you need to install all of them one at a time, or you can try another computer if you have one available.
http://forums.androidcentral.com/ht...tall-4-3-ruu-windows-7-8-1-a.html#post3466555

I want to take a minute and thank you @Seanie280672!!! I am going to go ahead and try it... I do however have another pc next to me so I will try running the RUU from that one in the meanwhile.

finxster said:
I want to take a minute and thank you @Seanie280672!!! I am going to go ahead and try it... I do however have another pc next to me so I will try running the RUU from that one in the meanwhile.
Click to expand...
Click to collapse
your welcome, but don't thank me yet, its not worked yet, im just sharing my knowledge which ive learned from others on this great forum.

Seanie280672 said:
damn, I had that problem once, its not the RUU at fault, its your computer, this is how I fixed it, its a bit long winded and you have to restart your computer after each installation, you need to install all of them one at a time, or you can try another computer if you have one available.
http://forums.androidcentral.com/ht...tall-4-3-ruu-windows-7-8-1-a.html#post3466555
Click to expand...
Click to collapse
So, I got it to run on my main PC but there is a dialog box that makes me skip all the steps... will try on the laptop
Same on my laptop... ARUWizard Click here to next dialog... and I can't do anything else... clicking ok until the program is killed

finxster said:
So, I got it to run on my main PC but there is a dialog box that makes me skip all the steps... will try on the laptop
Same on my laptop... ARUWizard Click here to next dialog... and I can't do anything else... clicking ok until the program is killed
Click to expand...
Click to collapse
ive never seen that error before, but this would maybe explain it: http://www.solvusoft.com/en/files/e...windows/htc/rom-update-utility/aruwizard-exe/

http://forum.xda-developers.com/showthread.php?t=2666090
He has the same issue, however I am in bootloader fastboot usb mode... and still nothing... should I try RUU mode?
@Seanie280672

finxster said:
http://forum.xda-developers.com/showthread.php?t=2666090
He has the same issue, however I am in bootloader fastboot usb mode... and still nothing... should I try RUU mode?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=50739768&postcount=4