Database Develop

[Q] MIUI Network error, also settings are not being saved.

Hi guys,
I have just flashed MIUI and my god it looks good
I do have a few problems, I can not pick up any networks (I'm on vodafone uk). When I try to find Network Settings I get: "Call Settings Error Network or Sim card Error."
I hope it is an easy fix I have tried leaving the phone for a few minuets which hasn't helped and I have tried rebooting the phone. When I reboot the phone it goes back I think factory settings as it asks for my Google account information plus Date format.
I used the following guide to install MIUI:
http://www.theandroidsoul.com/galaxy-s-miui-rom
If you think I have a better chance to get this solved on another thread / forum section let me know and I will re-post it
Thanks.

well ideally this thread would be better off under the 'MIUI general, or the MIUI development' but considering you already posted dont worry
anyway it sounds like your IMEI is corrupted, have you checked this by dialing *#06# ??
if its all 0's or a complete different IMEI to is was before hand, just apply the efs backup you should of made before starting the flash.

Well my IMEI is fine, well it gives me a number which I think is correct But I didn't apply a efs back up not sure what that is.
If I want to reinstall MIUI would I need to flash back to 2.2 then flash to MIUI since they keep saying you need to be on 2.2 before you begin the flash.
I was on Darky's 2.2 before I flashed just fancied the change

no, you are on MIUI now right ? so just reflash the ROM again, and make sure you are on the latest kernel too.
if that dont work, try formatting cache / data / datadata / system / dalvik cache, then again, reflash the ROM

Yes I am currently on MIUI.
I used the following:
speedmod-kernel-k13c-500hz.tar
cm7-galaxys-initial-kernel.tar
galaxys-efsbackup.zip
MIUI-RC7-1.4.29.zip
Maybe some of these files conflict with the newer version of MIUI?

they shouldnt conflict.
did you try the steps in my last post ? if so how are things now ?

Cheers for your help. I flashed it back to 2.2 stock then went to MIUI seems to be working now, strange but I am happy

[Q] NFC Wont Working

Hello,
Recently i bought my Xperia Z C6603, the first impression made me very happy. I have imported my from Malayasia and the version of android it was 4.1 i think then i update with the official sony update software twice, now i have 4.4.2 installed.​After that i started to test your functions and when i turn the NFC on, they dont work, the icon on status bar wont appear and when i come again to the connection settings NFC becomes unchecked again.​searching for this i see many people with same problem after rooting (until then I had not rooted), and resolving by going to file manager> data> and rename a USF folder, but to that you need to root the device then i do that using the towel root. After that i navigate to data folder using the root Browser and dont see any USF folder.​
Please help-me i dont want to change the official system ( i see other people with this problem resolving like this)​
Sorry for bad english, it is my first thread here if have any issues pelase tell me and i edit.
Thanks

Recovery and Kernel for CyanogenMod 12

Hello,
I need some help with install CyanogenMod 12 - Neo's Homebuilds
I have Sony Xperia T LT30p
Android ver: 4.3
Kernel ver: 3.4.0
Build number: 9.2.A.1.199
Phone is unlocked and rooted.
I have problem on next steps - recovery and flash
In instruction to install CyanogenMod12 doesn't write how recovery I shoud use. I read, most people use CWM, so I was looking for that recovery.
Unfortunatelly, from this post http://forum.xda-developers.com/showthread.php?t=2012738 when I tried run CWM v9 installer for JB, select my phone from list
I have only " deamon not running, starting it now on port 5037* deamon startded successfully" and nothing happens.
I flashed this one: http://forum.xda-developers.com/showthread.php?t=2677553 Installed correctly, I go to cwm recovery, I did a backup, but when I was tried
install rom, I have an error something like "You tried install rom for LT30, but your device is Hayabusa" and installation is aborted.
What recovery (and from where) I need, to correctly install this mod? Do I need install another kernel too? (All kernels what I seen, have older build number than I have on the phone)
Could someone help me to finish this process?
Best Regards

Same issue like here.
http://forum.xda-developers.com/showthread.php?t=3038250
Check this out. :good:

Hey WhiteNeo, thanks for response.
I read this post before, but in there, user has a Xperia V, and has a different Build number, and he has (a good?) recovery (I don't know if this has any significance) and aborts appears, in the middle of installation with different kind of error log.
I have abort message on the beginning, telling that the rom is ok but device is Hayabusa..:/
Could you tell me what recovery I should use? (Or maybe this what I have installed is correctly? I don't tried do this on the TRWP)
I need flash another kernel? or it's not necessary?

Still, the steps I mentioned are the same.. Either remove the first line in updater-script, or flash my kernel via fastboot before installing the rom.
The kernel does include a working recovery from where you may flash the rom itself.

Good news, I finished and it works
I flashed the kernel – boot.img from your rom zip package (maybe it worth add this info to the instruction on first page?)
Thanks very very! much for your hints. So now I join to the „tester” your great rom
For now (using only 1 hour) I found only 2 bugs.
First is a „!” symbol near gsm signal when we turn off cellular data.
Second is a unable to turn on the camera using dedicated button.
Thanks again.:good:

KOMODO404 said:
First is a „!” symbol near gsm signal when we turn off cellular data.
Click to expand...
Click to collapse
Funnily enough, that symbol shows that you don't have cellular data (internet connection); if you don't like the symbol, turn on cellular data or connect to a working WiFi network.

Antiga Prime said:
Funnily enough, that symbol shows that you don't have cellular data (internet connection); if you don't like the symbol, turn on cellular data or connect to a working WiFi network.
Click to expand...
Click to collapse
The "!" symbol, it's not funnily enough, on any kind of system or application.
It's little weird kind of notification about disabled internet connection. Many people save the battery or $ by
disabling cellular data (in stock system you don't have any icon to inform that status) and that should be
something "normal", "!" is unnecessary to inform that fact.

KOMODO404 said:
The "!" symbol, it's not funnily enough, on any kind of system or application.
It's little weird kind of notification about disabled internet connection. Many people save the battery or $ by
disabling cellular data (in stock system you don't have any icon to inform that status) and that should be
something "normal", "!" is unnecessary to inform that fact.
Click to expand...
Click to collapse
Then you should probably complain to Google and it's developers for creating that ugly and disgusting icon, instead of labeling it as a bug. Just because there is something about your phone that you don't like doesn't mean it's a bug; that's like saying my battery only lasting 18 hours is a bug, when in fact I leave my screen on for more than 3 hours.
Also, I didn't know there was an Official Android 5 Stock Rom for either the T/TX Sony phone, so I wouldn't know about how it behaves. Please do share the news.
http://www.androidpolice.com/2014/10/18/lollipop-feature-spotlight-android-now-defaults-to-mobile-data-when-wi-fi-has-no-internet-access-signal-icon-adds-a-for-no-connection/
Also custom ROMs don't always have the same features stock ROMs do, for instance, opening the camera app when clicking on the camera button (doesn't work on any of the custom ROMs I've used), but again, that doesn't mean it's a bug.
You can probably use Xposed + Xposed Additions to get that function.

Antiga Prime said:
Then you should probably complain to Google and it's developers for creating that ugly and disgusting icon, instead of labeling it as a bug. Just because there is something about your phone that you don't like doesn't mean it's a bug; that's like saying my battery only lasting 18 hours is a bug, when in fact I leave my screen on for more than 3 hours.
Also, I didn't know there was an Official Android 5 Stock Rom for either the T/TX Sony phone, so I wouldn't know about how it behaves. Please do share the news.
Also custom ROMs don't always have the same features stock ROMs do, for instance, opening the camera app when clicking on the camera button (doesn't work on any of the custom ROMs I've used), but again, that doesn't mean it's a bug.
You can probably use Xposed + Xposed Additions to get that function.
Click to expand...
Click to collapse
I didn't know that in the original android 5.x symbol "!" near gsm signal, is implemented - is changing, figure things out.
For me, its a little strange, "!" symbol should inform that something is wrong / something damaged but in this case
everything is ok but symbol is displayed. All right, this is only my opinion.
I didn't write nowhere about official android 5 for Xperia T, so I don't know what you mean.
About camera button, it's works, example on the Ultimate PureXT custom ROM, so it is possible to work on custom rom.
If it's designed for something, and now it's not working as it should....how do you call it if not a bug? fault? defect? mistake?
Fortunately, it's only a details and I'm grateful to the authors, for this custom rom and I keep my fingers crossed for next update
to improve this rom.

KOMODO404 said:
I didn't write nowhere about official android 5 for Xperia T, so I don't know what you mean.
About camera button, it's works, example on the Ultimate PureXT custom ROM, so it is possible to work on custom rom.
If it's designed for something, and now it's not working as it should....how do you call it if not a bug? fault? defect? mistake?
Fortunately, it's only a details and I'm grateful to the authors, for this custom rom and I keep my fingers crossed for next update
to improve this rom.
Click to expand...
Click to collapse
What I meant was that even on Stock ROMs, the icons change to show there is no connection to Google's servers (blue colored signal in 4.3 and below, and orange colored in QS in 4.4), so it shouldn't surprise you that the function is still there.
About the camera button... I would probably call that not having access to the entirety of Sony's source code, drivers, etc., in order to implement that function, and custom ROM developers probably just haven't simply figured that out yet; because, for your information, the Ultimate PureXT Rom is not a custom ROM.

[Q] [HUAWEİ G7] Guys i need your help. You are the last hope so

So i bought my Huawei ascend g7 like 4 months ago and ı Rooted it
Then i try to install Xposed its giving error
Xposed says : There seems to be a known issue (''Resources subclass'') with your ROM. İnstalling Xposed might not work or lead to severe problems. Click here for details about the issue.
So i click it, its says : you can simply disable the resources API in the xposed installer settings.
I try everything but it didn't work. Even i change system.prop files like ( hw.themes = 0 ) it didn't work
i need your help please.

try change new room (or version android and try exposer on that new room it might work ....) on me worked just by disabling that experimental option on his menu setting ...the instaled again framework and he working .......i have another problem with my terminal .....i even changed alot IMEI but still canot call or receive calls (rooted, super user , diferent rooms ....changing imei etc ..nothing works) ...but the internet from same newtwork sim is working perfectly.....dunno what to do more

[Guide][Huawei P8][15-4-2016]How to hide the Navigation Bar All Roms

Hi guys, this is a tutorial on how to hide the navigation bar for all firmware, just one consideration you need to take after the following process you can later update only up to Version B150 (confirmed) and up to "Marshmallow, only if you update to Marshmallow from a rom that has the navigation bar hide toggle activated" and still be able to maintain the ability to hide the navigation bar. If you update to version B170 or B180 you risk losing the ability to hide.
Update (15-4-2016): In the latest Marshmallow update B320 you cannot hide the navigation bar the only way is to go to an old version that has the suspend button like version B120 or B132 then you need to activate the hide toggle afterwards update to Marshmallow B320 rom directly, now the hide navigation toggle will stay but if you make a system reset it will disappear and you cant't have it back unless you do the whole process again
--
Update (16-10-2015): If you're able to get version B200
If you are in the European region or in China and manged to get the update, it seems touchplus is back so simply skip to the
How to part.
--
What you will need?
1. vB120 stock firmware or any firmware with Touch plus which you can download from Huawei support page
http://consumer.huawei.com/en/support/products/index.htm?pname=P8(GRA-UL00)&pcode=GRA-L03
in the link up replace 'en' with your country page short code ...................example: Singapore -> 'sg'
you should be able now to see the base stock firmware vB120 or any base firmware with Touch plus option and download it.
2. SDcard
** Use Hisuite from the PC to backup you apps and contacts if you don't want to lose them, which you can restore them later after we finish with the process.
How to:
A. If you are on v B120 or v B132 or v B200(not sure all regions)
please follow the instructions exactly in order to hide the navigation bar
1.Go to settings->under Smart assistance heading:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
-Select touch plus
View attachment 3487482
-Tick 'Touch plus' radio button.
View attachment 3487483
Go back to settings-> under Smart assistance heading:
-Select 'more' -> Select Suspend button -> Tick 'Suspend button'
View attachment 3487496View attachment 3487495
Go to settings->under Smart assistance heading:
-Select touch plus
-Tick 'Use film navigation keys'.................. the navigation bar will disappear.
View attachment 3487488
-Touch the suspend button and select back
.....sorry i forgot to attach the picture with suspend button clicked on.
Go back to settings-> under Smart assistance heading:
-Select touch plus->untick 'use film navigation keys'.
View attachment 3487490
Now the navigation bar will reappear with the hide icon in the navigation bar in the left side.
View attachment 3487490
-If you want to disable the suspend button -> Go back to 'more' and turn off the Suspend button.
View attachment 3487491
2. If you want to update your firmware it is ok to do it up to version B150 u will still be able to maintain the ability to hide the navigation bar "But make sure you don't reset your device after the update or you will lose the ability to hide", if you can update to v200 you will have to redo the How to part i guess.
View attachment 3487493
B. If you are on version B140+,B150,B170,B180,B320
1. Download vB120 or vB132 firmware it will be in .zip format, extract the firmware which will create a folder called 'dload', copy that folder to the sd card "you need to have an SD card to be able to do this".
2. Go to settings->updater->click the menu to update locally...... it should see now the update package you placed in your SD card.
3. Select it and let it install.
4. After the installation reset the phone from settings in order to have a clean rom without bugs.
5. Follow the instructions outlined up for hiding the navigation bar for version B120 or B132.
6. You can update later on only to version B132 or B150 or B320 and still be able to hide the navigation bar.
7. Use Hisuite in your pc to restore your apps and contacts if you want to.
Check the Pictures attached for clear understanding. Enjoy:good:
P.S: To other Huawei device users there is a guide to enable touchplus on your device written by @kuhno Thx. http://forum.xda-developers.com/gx8...-touchplus-t3390358/post67122095#post67122095 . Please check it out.

I have a few question:
1. Doesn't it mean downgrading to B120?
2. 'dload' has to stay on MicroSD card for good?

majaczos said:
I have a few question:
1. Doesn't it mean downgrading to B120?
2. 'dload' has to stay on MicroSD card for good?
Click to expand...
Click to collapse
1. Yes you need to downgrade in order to get the Touchplus setting(Responsible for hiding the navigation bar) which is removed from recent updates. After the installation of version B120 you can upgrade using the updater to version B132 or B150 max (Don't worry the updates are small in size) and still maintain the ability to hide the navigation bar, but after you update the Touchplus setting will be removed from the firmware higher than version B132 that is why you shouldn't reset the rom or else risk losing the ability to hide.
2. Regarding "dload" you can remove it from the SDcard after you install the firmware.

hi,
few questions:
- do i need being root to do that ?
- i download ( GRA-L09 Firmware(Android 5.0,EMUI 3.1_05012YBD,V100R001 C900B132 CUSTC432D001,West European Region) this work to ''downgrade'' or not ?
thanks.

voyd said:
hi,
few questions:
- do i need being root to do that ?
- i download ( GRA-L09 Firmware(Android 5.0,EMUI 3.1_05012YBD,V100R001 C900B132 CUSTC432D001,West European Region) this work to ''downgrade'' or not ?
thanks.
Click to expand...
Click to collapse
Hi, no you don't have to be rooted or even unlock your bootloader. I think the firmware you mention is fine to use for downgrading. Good luck. :good:

I already downgrade from B170 to B132 with your tutorial , many thanks it s perfect but now can i update by the updater app to B170 and keep touch plus ? ... Thanks again

papyzebike said:
I already downgrade from B170 to B132 with your tutorial , many thanks it s perfect but now can i update by the updater app to B170 and keep touch plus ? ... Thanks again
Click to expand...
Click to collapse
Yes you can update and still be able to hide the navigation bar(update only to vB132 & vB150) but the Touchplus setting will be removed that is why make sure to not reset the phone after the update or you will lose the ability to hide. Good luck

Hi
I have B180 now,how I can hide the bar, touch plus not showing now in the settings . I ll updated,its lost and showing the bar . Now what can I do to hide it ?

thanks for your response, i downgraded to 132, done all step you describe.After update 170 i lose the possibility to hide de navbar. i have done this 2 time with same result.
Don't works for me.

Waqar4005 said:
Hi
I have B180 now,how I can hide the bar, touch plus not showing now in the settings . I ll updated,its lost and showing the bar . Now what can I do to hide it ?
Click to expand...
Click to collapse
Follow the instructions outlined up, you can not update to version B180 because you will lose the ability to hide the navigation bar you need first to downgrade to B120 or B132 then update to version B150 as a maximum update if it exists for your region. So far i can confirm it works if you update up to version B150. I thought you can update to version B170 but it seems you lose the ability even if you update to it. I am on B150 and i can hide the bar.

voyd said:
thanks for your response, i downgraded to 132, done all step you describe.After update 170 i lose the possibility to hide de navbar. i have done this 2 time with same result.
Don't works for me.
Click to expand...
Click to collapse
Sorry to hear that, I can confirm that it works if you update to B150 which i am on now because there is no version B170 for my region so i can't confirm if it works on version B170 but i heard from some users it should work on it.
Any way my theory is this, you can update to at least 1 version from the base firmware in my case my base firmware is version B120 and the following update to it is version B150. In your case i think it is just version B132.
Me: B120->B150->B180
You: B120->B132->B170->B180

With my Rom you can hide the bar whenever you want ..

can anyone give a link where I can download vB132, because I have the same thing happen to my phone. please anyone.

JanellaKate said:
can anyone give a link where I can download vB132, because I have the same thing happen to my phone. please anyone.
Click to expand...
Click to collapse
There is no link for version B132 (UL00 model), there is another thread for p8 roms that lists version B132 but that firmware is broken you can't unzip it once you download it. Best thing is to download from huawei support page version B120 and then update it to version B132 which will be a small update.

Blackball, probably you have P8 lite version, on normal P8 there is no such option..

Guys, if you want the latest update and don't want to unlock your bootloader and root. Then use this app:
https://play.google.com/store/apps/details?id=com.gmd.immersive&hl=en
the paid version will remove the red line.
1. If you are rooted use this:
https://play.google.com/store/apps/details?id=com.gmd.hidesoftkeys&hl=en.
2. If you are rooted and don't want to use navigation controls instead geastures use:
https://play.google.com/store/apps/details?id=com.goodmooddroid.gesturecontroldemo&hl=en you can also edit the build.prop to remove the navigation bar and then use this app instead.(That's what i was doing in my old phone, i intend to do it later on. I always hated the the physical keys and soft keys instead gestures should be the way to navigate)

hi,
I use the immersive mode, the only possibility i have found to hide navbar, i'd like to root my phone but Huawei didn't send me the bootloader code , i waiting since 2 week and nothing (5 mails), so i look for another solution but few people seem interested by P8 phone.
If you know a solution to root my phone i take it ....
Thanks for your time and your efforts

voyd said:
hi,
I use the immersive mode, the only possibility i have found to hide navbar, i'd like to root my phone but Huawei didn't send me the bootloader code (**** huawei...) , i waiting since 2 week and nothing (5 mails), so i look for another solution but few people seem interested by P8 phone.
If you know a solution to root my phone i take it ....
Thanks for your time and your efforts
Click to expand...
Click to collapse
If you root(unlock bootloader) you lose your warranty i don't think it is worth it at least for now since it's new, i personally haven't rooted yet and i don't intend to for now. Any way you can try to login to Huawei unlock page using the Facebook account login(the only working method) and get the unlock code online. If you can't send me a private message of your phone details and i will send you the unlock code.

I can't downgrade my Huawei P8 now, it's always says FAILED.. can anyone help me what to do.. am now stock in B180 and touchplus is missing now...

JanellaKate said:
I can't downgrade my Huawei P8 now, it's always says FAILED.. can anyone help me what to do.. am now stock in B180 and touchplus is missing now...
Click to expand...
Click to collapse
There is 2 possible reasons i can think of for why you are getting the fail message:
1. The recovery isn't stock meaning you are using a custom recovery like (TWRP) and in this case you have to go back to stock recovery, but from your statement it seems you didn't unlock your bootloader yet.
2. You are using the wrong firmware with the wrong region to downgrade to. Make sure that the 3 letters behind the firmware version is the same as the one your native stock rom.
Example: my build number is : GRA-UL00V100R001C470B180
to downgrade i need to use the build number that has the same underlined letter and numbers(C470) so the build number i should use should be GRA-UL00V100R001C470B132 and not for example GRA-UL00V100R001C10B132.
I hope this helps, other than that i am not sure why you are getting the fail message. if non of these suggestions help try to downgrade to another version (either B120 or B132 depending on your region) or download another link of the same firmware i suggest you download it from Huawei support page for your region.