Charging watch - LG G Watch R

Just curious when you charge the watch does it always switch on? Is it possible to charge the watch when it's turned off?

I guess you can't as it automatically switches on...

I switch mine to cinema mode and switch bluetooth of at night.

What I forgot to say is that despite the mode you're in, the watch will go in standby mode and cut the screen. This is the case when it doesn't detect movement. Put it on a desk for a moment and you'll see it goes dark.

Can one plug your typical phone charger into the charging cradle, instead of using the travel adapter, to charge the watch?

It's a 0.5ma charger and that is not much. With bigger chargers you'll charge faster but also create heat and that is not very good for your battery.

Related

Correct way to charge your phone?

I was just wondering what the correct way to charge your phone is. I have an AT&T tilt. When the battery would get to like 3% I would just turn it off and then plug in my AC wall charger that came with it and leave it until it was fully charged. But I want to leave my phone on all the time so I dont miss calls, So when I leave it on while charging the phone gets pretty warm and the screen turns on by itself randomly. And when i plugged it in the other night before i went to bed (phone was still on whole night) in the morning I went to wake it up and it wouldnt. When i slid the keyboard out it lit up and everything so it was definitely on, but the screen wouldnt come on no matter what I did. Am i not suppose to be charging it while the phone is still on or leaving it plugged in for a long time after the battery has reached its full charge using the AC wall charger that came with it. Should I instead by one of those cradle chargers cuz dont they have a thing where once your battery is full, it will stop charging it? Any feedback would be really appreciated. Thank you.
hmm i dont really know bout u
but i've really never turned off my phone....the tytnII or any of my previous phones i would just leave it on day and nite and i go to bed i charge it or any time when i'm home if its low on battery
kinda wild how many people torture their batts on acount of that old myth
http://forum.xda-developers.com/showthread.php?t=355318&highlight=batt+myth
How are you charging it? Supplied wall charger or USB port?
The supplied wall charger will turn it on initially and it should then turn back to standby as set by your power settings. Make sure you don't have it set to ramain on when on external power.
USB charge connection to PC or laptop will keep polling the phone if Activesync is enabled and turn it on continuosly.
Some external chargers, such as the ones for the previous TyTyn (not TyTynII) required two pins connected to enable charging and if you are using one of those the TyTynII thinks a data connection is being made and randomly powers up.
It's been my experience to keep the battery on a charger whenever possible. Those batteries "like" to be topped off. I have killed a couple of batteries by running them down all the way and trying to bring them back to life. Li Ion batteries are not like NiCads
When I'm driving, it's plugged in. At home, it's on my desk charging. While I sleep, it's charging on my night stand.
I found charging when every possible, and keeping it topped off as much as possible will enable the battery to last longer for those times you can't get to a charger. This has been the case for all the HTC phones I've used.

[Q] Charging problem

Hi,
I have a new and flawless Note, the USB connector is OK.
At night I connect the Note to the charger and I put some music on to fall asleep. Playback is configured to just play one album once.
Normally I put the phone in Flight Mode, in order to sleep without unnecessary radiation next to me.
On some few occations (it happend to me for like 5 times now), in the morning, the phone is not charged at all! But I am 100% sure that the battery status icon on the top bar signaled the charging mode.
This morning it happend again and I noticed that I left the Flight Mode off (because my wife is away and I want to stay in contact if needed).
Also, I noticed that I have been using a ZTE charger specked with 750mA, while the original Samsung Galaxy Note charger is rated 1000mA.
Can it be, that I was using the ZTE charger on its limit and that having apps running, or maintaining flight mode off, was enough to actually not being able to deliver that extra juice to charge the battery?
The other reason could perhaps be a software problem, like some app draining the battery as much as the charger is able to charge, so in the end the battery stays more or less the same.
I am positive that the USB port is not broken. I.E. I tested by unplugging and plugging the charger from the wall socket instead from the phone and all is recognized OK. Also, no issues when connecting to the PC.
What is odd: on previous occations I think I remember that I just plugged the phone back and it charged.
I swapped the chargers, but still I have this odd impression, fearing that the device might have an issue.
Anyone had similar problems?
Cheers,
vma
Yes, looks like a weak USB charge problem. You get similar behaviour if you try to charge the device from a PC - sometimes I have mine plugged in to my PC at work all day and it barely charges. Get home, put the official charger from Samsung in from a walk socket and it charges in an hour or two max.
Sent from my GT-N7000 using Tapatalk

Tasker In-Car power issue

I have built a Nexus 7 into my car and I have a small issue.
I need a tasker profile:
When I turn the car on, the screen turns on and music plays.
When i turn the car off, the music stops and the screen turns off. (along with other stuff)
I have created a "test" version of all this so when I connect a power cable (i.e when charging) it turns the screen on and plays music.
When I disconnect the USB (i.e. stops charging) the screen goes off, music stops, bluetooth off etc and all this works fine.
However, the USB will always be connected with power coming through so I cannot use this option. I need another way to detect if the car is on and when it turns off so I can run the correct tasks.
One option i thought of is buy a wireless charger and build it into the car. When my phone is placed on the charger, send a text message to the tablet to turn it on, and when i turn the car off the charging will stop, then the phone will send a text to the tablet to turn the screen off etc.
However after purchasing the wireless charger, i realised everytime i get a call or take my phone of the charger for whatever reason, the screen will go off and music will stop, so this isnt an option either.
So the question is, what can i do so tasker can detect that the car is on or off so the nexus can perform the tasks?
Hope that makes sense
idi_idi said:
ISo the question is, what can i do so tasker can detect that the car is on or off so the nexus can perform the tasks?
Click to expand...
Click to collapse
You do realize that you really have two problems, right? The Nexus 7 will not know when the car is started, or stopped. Unless you can disconnect the power, manually etc.. If you can do that, you can send a command in fastboot to force the N7 to power up when power is connected, otherwise you'd have to boot it up manually.
You could unplug the USB charger.. Or have the tablet turn off after N hours of inactivity, although how do you detect "new" activity if there's no change when the car is started.
If your car has bluetooth, you could detect that as the "turn off" task perhaps, but turning on is probably your bigger issue.
Will the wireless charger idea work?
idi_idi said:
Will the wireless charger idea work?
Click to expand...
Click to collapse
No idea what you mean by wireless charger (2012 model has no wireless charging), or how you'd control it with the phone. And unless your tablet is a 3g one, I don't know how you'd directly communicate with it either.
I just put my phone back to stock so I had to uninstall Tasker, however your tablet does not pull power once the car is off correct? I had a power based one as well, I remember testing it with a surge protector. I could leave the USB connected but flip the surge protector on and off (to mimic power to the phone being halted). To my knowledge when the car is off your USB shouldn't be drawing power therefore you could run the profile off that. Export the profile and post here. I'd like to help test it.
Sent from my Nexus 5 using xda app-developers app
elpeterson said:
To my knowledge when the car is off your USB shouldn't be drawing power therefore you could run the profile off that. Export the profile and post here. I'd like to help test it.
Click to expand...
Click to collapse
My last four cars (current and previous of wife and my cars) the lighter plug stays powered when the engine is off.
I think it's getting increasingly common for the plugs to stay powered. So there's no way for the tablet to know the car is off unless the car has bluetooth and you can look for that.
khaytsus said:
My last four cars (current and previous of wife and my cars) the lighter plug stays powered when the engine is off.
I think it's getting increasingly common for the plugs to stay powered. So there's no way for the tablet to know the car is off unless the car has bluetooth and you can look for that.
Click to expand...
Click to collapse
I have actually found the exact opposite to me true. My wife's 2014 Pilot goes off as well as my 2012 Veloster whereas my 2001 Sable and her 2007 Passat left them on. I'm not sure if you can resolve your issue then. I'll keep looking into it. You could trigger it based on speed I think
Sent from my Nexus 5 using xda app-developers app
elpeterson said:
I have actually found the exact opposite to me true. My wife's 2014 Pilot goes off as well as my 2012 Veloster whereas my 2001 Sable and her 2007 Passat left them on. I'm not sure if you can resolve your issue then. I'll keep looking into it. You could trigger it based on speed I think
Click to expand...
Click to collapse
I suppose that could work.. Find out the speed for several periods in a row, if it's zero, assume it's time to shut down. But that'd mean it's playing music etc during that period etc.
IMO bluetooth, or a plug he can turn off, is really the only way if his USB is powered up all of the time.
Also remember, he has no way to know when to power UP either. I still maintain that's the bigger problem, especially if it's a fixed install and he can't poke the power button
At the moment, its connected so when the car turns on, the USB is powered up and when the car turns off, the power in the USB stops. So at the moment, my tasker profile works on "when charging" do Task A, when not charging do Task B. And it all works fine at the moment.
However I am having issues with charging, (The device is not charging fast enough when turned on and the battery drains over a couple of days) so i planned to keep it always charging, so the power in the USB will always be there regardless of if the car is on or off. So i cant use the "when charging" on tasker anymore. So i needed a new way to it to figure out when i got in the car.
Here are my ideas:
1. Have a wireless charger in my car for my phone. (Not the tablet). When i get in the car, i could put my phone on the charger, have the phone send a text to the tablet to turn it on. When i remove the phone from the charger, send a text to the tablet to turn it off. Simples
2. Connect a wifi router in the boot or something and have it start up only when the car starts, and turn off with the car. It doesn't have to be connected to the internet, it just needs to power up. Then i can do a 'When wifi near' on tasker to see if the car is off or on, and turn the screen off accordingly.
3. Connect the tablet to my phones bluetooth. Whenever i get in the car, they will connect and the tablet will power on. when i leave the car, it will power off. (Not the best option since it will stay on even if i am near the car)
4. Similar to option 1, but have a nfc sticker in the car. when i swipe my phone on it, it communicates with the tablet and turns it on, n then off when required. but i dont want to do this since i know i am going to forget to turn it off one day.
I don't really want to do the speed option, since i want it to turn on as soon as i enter the car, not when i start driving, and i want to be able to park up and use it when i need to put an addess in the sat nav etc.
idi_idi said:
However I am having issues with charging, (The device is not charging fast enough when turned on and the battery drains over a couple of days)
Click to expand...
Click to collapse
If your charger isn't charging fast enough, you're using a crappy charger or one that isn't designed for Android. If your car has a built-in USB port, those are usually super slow, maybe 500mA, most less.
Anyway, glad to hear that your power follows the car state, that makes it all simple.
khaytsus said:
If your charger isn't charging fast enough, you're using a crappy charger or one that isn't designed for Android. If your car has a built-in USB port, those are usually super slow, maybe 500mA, most less.
Anyway, glad to hear that your power follows the car state, that makes it all simple.
Click to expand...
Click to collapse
I've tried about 20 different chargers, up to 2.5amps. The problem isnt the charger. The problem is i dont drive the car long enough to give it time to charge. So if i drive the car for about half an hour a day, for the other 23.5 hours, its on standby. so the battery is always going to go less. So thats why I plan to connect the charger directly to the battery so it will always be charging.
idi_idi said:
I've tried about 20 different chargers, up to 2.5amps. The problem isnt the charger. The problem is i dont drive the car long enough to give it time to charge. So if i drive the car for about half an hour a day, for the other 23.5 hours, its on standby. so the battery is always going to go less. So thats why I plan to connect the charger directly to the battery so it will always be charging.
Click to expand...
Click to collapse
Oh, I thought you had the tablet turning off when the car went off. If I were you, I'd set up a profile that turns off the tablet if it hasn't had power in a few hours, pretty simple to do. On Power, set a time var, every so often check that time var to see if it exceeds your threshold, and power down if so.
If you don't have much installed, it should be a fairly quick power-up, especially the plug goes hot when you start the car.
BTW I hope you're considering cold and heat if you're leaving the tablet in the car. Leaving it in the heat all summer will will the battery.
You can use Timur's kernel, it senses power to turn N7 on or deep sleep it.
Also charges N7 while using OTG.
It;s designed for car install.
khaytsus said:
If your charger isn't charging fast enough, you're using a crappy charger or one that isn't designed for Android. If your car has a built-in USB port, those are usually super slow, maybe 500mA, most less.
Anyway, glad to hear that your power follows the car state, that makes it all simple.
Click to expand...
Click to collapse
I agree, you need to get at least a 2A charger for your car. My wife would watch Netflix on long drives and my car USB port or the normal USB charger I got for the cigarette lighter worked until I up'd it to a 2A charger. I can have screen on for hours while streaming video and still fully charge the tablet in a reasonable amount of time.

wireless charging style shell actually reduces battery instead of charging

So I slapped on the wireless charging style shell and put the phone on a wireless charger before even turning it on for the first time. The screen lit up and told me the phone was charging with the battery at 66%. I let it sit for half an hour then check it again by tapping the power button. The battery is now at 58% and falling. So much for that. Phone isn't even on and the battery is being used instead of charging the device.
xamindar said:
So I slapped on the wireless charging style shell and put the phone on a wireless charger before even turning it on for the first time. The screen lit up and told me the phone was charging with the battery at 66%. I let it sit for half an hour then check it again by tapping the power button. The battery is now at 58% and falling. So much for that. Phone isn't even on and the battery is being used instead of charging the device.
Click to expand...
Click to collapse
Mine works fine with the tumi battery mod.. I'm using the Samsung fast charge wireless charger
I have the wireless charging mod and it charges fine.. not as fast as my s8 but good enough.
I was listening to music on the JBL mod with the phone plugged in. I took the phone off the chager and left the mod on. 10 minutes later the phone was at 98% from doing literally nothing. Typically I lose about 1% every 2½ hours when then phone is on standby. I'm guessing the mod is trying to charge itsef using the phone.
I have the Moto Style Shell with wireless charging and use a few different wireless charging pads (at work right now and have the LG WCP-300) and have had no problem using any of them. You might want to go into the Moto Mods Manager and check if there is a software update, my current software version is 0.55. If you software version is up to date then maybe a restart of the mod is necessary.

Screensaver during Wireless Charging?

I charge my Nexus 6 with a wireless charging stand on my night table. I would like to have the screensaver clock alive all night. However, once the phone is charged the screensaver stops. I do have the setting as either docked or charging, and on wired charging the screensaver stays up even when the charging reaches 100.
Is there any way to get the screensaver to run all night on the wireless charge stand?

Categories

Resources