Database Develop

Problems with unlocked hboot 2.00

Hello,
I have problems installing custom ROMs on my device.
When i try to instal a rom through the latest 4EXT Touch Recovery it can't instal the boot.img. Normally i flashed the boot.img myself in fastboot but now i can't connect it anymore with my pc.
I searched for downgrading or maybe upgrading the hboot to get full s-off.
At the moment i'm running *** UNLOCKED *** HBOOT-2.00 with S-ON.
The ROM i'm running is NikProjectX. The boot.img of this ROM is now installed so when i try to flash another ROM it can't overwrite this boot.img so i'm stuck in a bootloop.
I have made nandroidbackup of this ROM and the previous ROM that was Coredroid V2.4.
Can someone please help me to get full S-OFF? I've tried allot but can't get it to work
Thanks and Regards, Bas

1. Go here http://forum.xda-developers.com/showthread.php?t=1373697
2. READ
3. Do
4. Done

Nonverbose said:
1. Go here http://forum.xda-developers.com/showthread.php?t=1373697
2. READ
3. Do
4. Done
Click to expand...
Click to collapse
5. Thank nonverbose
Sent from my Nexus 7

Yeah, i have found that too. That wasn't so hard.
But the problem is that i can't connect the phone with adb. And also in fastboot it won't connect to the pc.

1. Are the drivers installed?
2. Is adB debugging enabled?
3. Are you sure its all done right?
4. Connect to PC and type in cmd window 'adb devices'
if it doesn't show a serial number, you've done something wrong
Sent from my Nexus 7

Yes everything is installed. And i know the adb commands.
It's working with the Desire HD but not with the Incredible S.
Maybe the ROM doesn't support it?? I also can't flash a new boot.img using Terminal Emulator.

Overloaded said:
Yes everything is installed. And i know the adb commands.
It's working with the Desire HD but not with the Incredible S.
Maybe the ROM doesn't support it?? I also can't flash a new boot.img using Terminal Emulator.
Click to expand...
Click to collapse
OK, I made this mistake with the last user that had connections issues, so here goes.
Are you using a Windows PC, a Linux box or a Mac?
So when you boot into the bootloader and you attempt to choose FASTBOOT from the HBOOT menu, the menu does not change to FASTBOOT USB when you connect your phone?

Need Help Unbrick My HTC One M7

My HTC One M7 is stuck at HTC logo and will not boot further. I've tried many methods, but cannot repair the phone. It's M7 Europe HTC_001 Firmware 1.29.401.13.
With bootloader unlocked I flash cwm recovery and tried to copy custom rom to flash but phone cannot mount usb storage. I tried to flash stock RUU 1.28.401.7, it won't flash because of hboot error. I tried to flash PN07IMG_1.29.401.13.zip using fastboot flash zip. firmware.;zip, with locked or unlocked bootloader, it won't flash, giving error.
Is there any full RUU 1.29.401.17 or RUU 2.17.401.1 firmware out there for download? I think that's my only solution is to get the same or higher full and not OTA firmware. Would it be possible to ADB push custom rom to phone if it can only power and stuck at logo? Or any other solution, please help, thanks.

There is far from enough info to help you
Have you looked at Hasoon's all in one?
http://forum.xda-developers.com/showthread.php?t=2183942
or mikes thread?
http://forum.xda-developers.com/showthread.php?t=2265618
It reads as though you need to read and ensure you understand before you attempt to resolve this
I like mikes method and both are proven to work
Please use the search option as it works

L0rdNels0n said:
There is far from enough info to help you
Have you looked at Hasoon's all in one?
http://forum.xda-developers.com/showthread.php?t=2183942
or mikes thread?
http://forum.xda-developers.com/showthread.php?t=2265618
It reads as though you need to read and ensure you understand before you attempt to resolve this
I like mikes method and both are proven to work
Please use the search option as it works
Click to expand...
Click to collapse
Thanks for your help but I've tried all that. First phone cannot "mount USB storage" in custom recovery so I cannot copy any file to the phone. Flashing stock RUU is not possible because there is no RUU 1.29.401.13.exe or higher, only OTA. Is it possible to downgrade hboot with s-on and in fastboot mode? Any other suggestion? Thanks.

citifone said:
Thanks for your help but I've tried all that. First phone cannot "mount USB storage" in custom recovery so I cannot copy any file to the phone. Flashing stock RUU is not possible because there is no RUU 1.29.401.13.exe or higher, only OTA. Is it possible to downgrade hboot with s-on and in fastboot mode? Any other suggestion? Thanks.
Click to expand...
Click to collapse
Try ADB push/sideload: http://forum.xda-developers.com/showthread.php?t=2325853&highlight=sideload

FIX
Hi, I was having the same problem, NOTHING was working, ADB Sideload failing, etc. and the OTG cable arrives tomorrow...my way to fix it?
1.- Went to TWRP Recovery
2.- Wipe>Advance Wipe> Wiped everything
3.- Format Data (option next to Advance Wipe)
4.- Reboot into Recovery(during reboot it said "your device is not rooted, want to root?) Marked yes.
5.- Advance Adb Sideload
6.- Sent CyanogenMod ROM...BANG! worked.
Hope this helps

I've tried to use adb push method but when I put phone to recovery (phone shows red triangle) and run command adb devices, it cannot see the device. Is it because of the drivers? I've installed all drivers and do not see any drivers error in device manager...I really appreciate all the helps from everyone and I spent so much time trying to fix this phone already and I feel I'm so closed now to fix it but just need little more help..Thanks..

L0rdNels0n said:
There is far from enough info to help you
Have you looked at Hasoon's all in one?
http://forum.xda-developers.com/showthread.php?t=2183942
or mikes thread?
http://forum.xda-developers.com/showthread.php?t=2265618
It reads as though you need to read and ensure you understand before you attempt to resolve this
I like mikes method and both are proven to work
Please use the search option as it works
Click to expand...
Click to collapse
Samper27 said:
Hi, I was having the same problem, NOTHING was working, ADB Sideload failing, etc. and the OTG cable arrives tomorrow...my way to fix it?
1.- Went to TWRP Recovery
2.- Wipe>Advance Wipe> Wiped everything
3.- Format Data (option next to Advance Wipe)
4.- Reboot into Recovery(during reboot it said "your device is not rooted, want to root?) Marked yes.
5.- Advance Adb Sideload
6.- Sent CyanogenMod ROM...BANG! worked.
Hope this helps
Click to expand...
Click to collapse
Thanks for your tips and advice..After many hours of trying, my phone is NOW ALIVE. This is how I did it:
1)Find a custom rom from this forum and rename to rom.zip, of course if you use windows like me with .zip extension hidden then just simply rename it rom (to make it simple and short) and copy it to adb shell folder.
2)After unlock bootloader, flash a custom recovery, find it in this forum or here: http://clockworkmod.com/rommanager
3) Boot phone to recovery, and select Install zip from sideload and plug phone to PC. Wait until phone installs all adb drivers..
4) In adb shell type command: "adb devices" without quotes, of course..to make sure adb sees your phone..You should see your devices name.
5) In adb type commad" adb sideload rom.zip..at this point you should see "sending: sideload....1%..wait until it show 100%..some roms like the one I used, Android Revolution HD One 12 (4.2.2) need to install from the screen, just follow instruction on screen and let it finish installation and wola, it's alive again..
I hope this will help someone who have similar problem with this phone. Thanks for the help from everyone.

HTC ONE not started, only htc logo
Hi how are you? I have a one mobile Htc One M7, just not started but show only htc logo. Plase help me!

citifone said:
Thanks for your tips and advice..After many hours of trying, my phone is NOW ALIVE. This is how I did it:
1)Find a custom rom from this forum and rename to rom.zip, of course if you use windows like me with .zip extension hidden then just simply rename it rom (to make it simple and short) and copy it to adb shell folder.
2)After unlock bootloader, flash a custom recovery, find it in this forum or here: http://clockworkmod.com/rommanager
3) Boot phone to recovery, and select Install zip from sideload and plug phone to PC. Wait until phone installs all adb drivers..
4) In adb shell type command: "adb devices" without quotes, of course..to make sure adb sees your phone..You should see your devices name.
5) In adb type commad" adb sideload rom.zip..at this point you should see "sending: sideload....1%..wait until it show 100%..some roms like the one I used, Android Revolution HD One 12 (4.2.2) need to install from the screen, just follow instruction on screen and let it finish installation and wola, it's alive again..
I hope this will help someone who have similar problem with this phone. Thanks for the help from everyone.
Click to expand...
Click to collapse
epic, thank you for the useful post

[Q] Android 4.4 OTA update and stuck in "no command" bootloop

Hi,
I installed a while ago 4.3 GE (rooted) for OTA updates. Everything seemed fine. Today i got the 4.4 OTA update so OTA does work. I rebooted the phone so it could install. The installation stopped after a while and gives the error: no command. After 30 seconds it reboots and gives this error again. Over and over again
I did not make a backup of my data on the phone. The default recovery mode is not available, this also gives the no command error. Fastboot does work.
I'm S-OFF and LOCKED.
What to do?
Someone got this working with Nexus 7 2012. But i need the OTA 4.4 file and ADB sideload needs to work...

Are you able to unlock bootloader using fastboot oem unlock ?

SaHiLzZ said:
Are you able to unlock bootloader using fastboot oem unlock ?
Click to expand...
Click to collapse
Yes, i used the unlockcode. Created a new one via htcdev. Bootloader is now unlocked. Try to reflash 4.3 recovery, flash is ok but still can't start recovery. I wanted to try to start normal recovery and use adb sideload to transfer files from sd to pc. Also tried to flash twrp and CWM but found no solution to transfer my files?

Try fastboot boot customrecovery.img
Also once you are in recovery, your device will show up under adb devices. Then you can adb push yourromname.zip /data/media/

SaHiLzZ said:
Try fastboot boot customrecovery.img
Also once you are in recovery, your device will show up under adb devices. Then you can adb push yourromname.zip /data/media/
Click to expand...
Click to collapse
Which customrecovery? Can i also transfer my data (pictures?) from sd to pc?

Use CWM if you wish.. http://forum.xda-developers.com/showthread.php?t=2173863
You have to use adb pull /data/media/DCIM/ if your pics are stored in DCIM folder.
This is DEPENDENT on your phone connecting and responding to ADB..

SaHiLzZ said:
Use CWM if you wish.. http://forum.xda-developers.com/showthread.php?t=2173863
You have to use adb pull /data/media/DCIM/ if your pics are stored in DCIM folder.
This is DEPENDENT on your phone connecting and responding to ADB..
Click to expand...
Click to collapse
OK thank you, i will try this tomorrow. I also found how to enable USB debugging through CWM . I think i will need that too.

I wouldn't do that. I have no idea what will it do to your phone. If you are not sure of ADB commands you can get in a bind. Unless you are doing a crash course on ADB&Fastboot tonight?

SaHiLzZ said:
I wouldn't do that. I have no idea what will it do to your phone. If you are not sure of ADB commands you can get in a bind. Unless you are doing a crash course on ADB&Fastboot tonight?
Click to expand...
Click to collapse
Ok, i only will try to do that when ADB not works. I think ADB only works when USB debugging is enabled in Android. But i can't start Android.
What do i have to start in CWM to use ADB?

mderksen said:
Ok, i only will try to do that when ADB not works. I think ADB only works when USB debugging is enabled in Android. But i can't start Android.
What do i have to start in CWM to use ADB?
Click to expand...
Click to collapse
Same trouble here? Have you figured it out yet?

bluestar23 said:
Same trouble here? Have you figured it out yet?
Click to expand...
Click to collapse
ADB was working, but i could not get my files off the phone. Tried to transfer files with ADB but it could not find the directories. So i gave up and i just flashed the 4.4 (non-root) RUU. The phone is working now but i lost my files

mderksen said:
ADB was working, but i could not get my files off the phone. Tried to transfer files with ADB but it could not find the directories. So i gave up and i just flashed the 4.4 (non-root) RUU. The phone is working now but i lost my files
Click to expand...
Click to collapse
You are lucky. I relocked it... So as of now, I cannot even flash TWRP for any rom...

mderksen said:
Hi,
I installed a while ago 4.3 GE (rooted) for OTA updates. Everything seemed fine. Today i got the 4.4 OTA update so OTA does work. I rebooted the phone so it could install. The installation stopped after a while and gives the error: no command. After 30 seconds it reboots and gives this error again. Over and over again
I did not make a backup of my data on the phone. The default recovery mode is not available, this also gives the no command error. Fastboot does work.
I'm S-OFF and LOCKED.
What to do?
Someone got this working with Nexus 7 2012. But i need the OTA 4.4 file and ADB sideload needs to work...
Click to expand...
Click to collapse
Paste your getvar all

Unable to Unbrick phone

Hey guys,
My younger brother had TWRP installed on his OP3. Yesterday he applied OTA and his phone got bricked. I unbricked it from MSMtool method (Qualcom Driver). It got unbricked and i have stock rom now however phone is stuck at android is upgrading (45 minutes). I tried restarting it and now it is in boot loop. i tried to flash latest OxygenOS from adb sideload and it got bricked again. Can anyone tell me what to do now or what is wrong with the device.

abdullah.ahsan11 said:
Hey guys,
My younger brother had TWRP installed on his OP3. Yesterday he applied OTA and his phone got bricked. I unbricked it from MSMtool method (Qualcom Driver). It got unbricked and i have stock rom now however phone is stuck at android is upgrading (45 minutes). I tried restarting it and now it is in boot loop. i tried to flash latest OxygenOS from adb sideload and it got bricked again. Can anyone tell me what to do now or what is wrong with the device.
Click to expand...
Click to collapse
You have TWRP installed? Use Method 2 of the unbrick guide. Now you want to wipe every partition then adb push your rom (not sideload) and manually flash it. Make sure you are on the latest Bluspark twrp.

Puddi_Puddin said:
You have TWRP installed? Use Method 2 of the unbrick guide. Now you want to wipe every partition then adb push your rom (not sideload) and manually flash it. Make sure you are on the latest Bluspark twrp.
Click to expand...
Click to collapse
I am using method 2, the OS gets stuck on bootloop that's why i tried to sideload later
I don't have a working recovery, all i can get is stock recovery, how can i install twrp?
I've tried flashing (fastboot flash recovery recovery.img) it but it is not working

abdullah.ahsan11 said:
I am using method 2, the OS gets stuck on bootloop that's why i tried to sideload later
I don't have a working recovery, all i can get is stock recovery, how can i install twrp?
I've tried flashing (fastboot flash recovery recovery.img) it but it is not working
Click to expand...
Click to collapse
Why is it not working? Does it give an error or something?

Puddi_Puddin said:
Why is it not working? Does it give an error or something?
Click to expand...
Click to collapse
Yes, it says flashing partition not allowed.
I suppose it is because usb debugging is off.

abdullah.ahsan11 said:
Yes, it says flashing partition not allowed.
I suppose it is because usb debugging is off.
Click to expand...
Click to collapse
Nah, In windows, go to Device Manager. How does your device show up? It has to do with wrong drivers.

Puddi_Puddin said:
Nah, In windows, go to Device Manager. How does your device show up? It has to do with wrong drivers.
Click to expand...
Click to collapse
Yes It shows up correctly.

abdullah.ahsan11 said:
Yes It shows up correctly.
Click to expand...
Click to collapse
What is correctly? What does it say? You might want to try different ADB drivers. You should be able to always flash In fastboot..

abdullah.ahsan11 said:
Yes, it says flashing partition not allowed.
I suppose it is because usb debugging is off.
Click to expand...
Click to collapse
Check again the bootloader to be unlocked. Use the tool for that, is it on OP3 forum, then retry to get a stock rom up before anything else (TWRP, custom rom, etc)
Sent from my OnePlus3 using XDA Labs

follow this instruction -
1- go into twrp and wipe everything even internal and formate it .
2- unistall all adb driver and oneplus driver also .. then clean tmp file from window
3rd- install latest adb+ oneplus 3 driver ..again restrat ..
4th-boot in fastboot mod and lock your bootloader
5th-flast latest build of oxygen stock recovery from fastboot
6th than again wipe or factory reset the device via stock recovery
7th open stock recoery than flash latest build of oxygen os via sideload
8th reboot the device and setup quikly
9th-unlock bootloader, flash bluespark recovery , flash rom, flash supersu ..
10th play with device

H81120x OTA update out. Has anyone still using stock updated to this version?

https://support.t-mobile.com/docs/DOC-28979
Pushed out December 5th, H81120x, just over 79MB, described as "Google monthly security enhancements".
I've forgotten where OTA update files are downloaded too. Can anyone refresh my memory?
Thanks!

This is good to know. Any idea if I need to be worried about the phone being rooted\xposed? This is my first Android device in many years and can't remember how to handle OTAs.

pizzaboy192 said:
This is good to know. Any idea if I need to be worried about the phone being rooted\xposed? This is my first Android device in many years and can't remember how to handle OTAs.
Click to expand...
Click to collapse
some roms get ota some dont you must be on stock rom i guess. or wait till they release KDZ.

raptorddd said:
some roms get ota some dont you must be on stock rom i guess. or wait till they release KDZ.
Click to expand...
Click to collapse
I'm running rooted stock because I need band12 and volte where I live and only stock has that working.

pizzaboy192 said:
I'm running rooted stock because I need band12 and volte where I live and only stock has that working.
Click to expand...
Click to collapse
yeah well i have never recive one since am not in the USA. i always used KDZ. so either flash latest 20v or wait but not sure what rom seems all MM have not been updated.

raptorddd said:
yeah well i have never recive one since am not in the USA. i always used KDZ. so either flash latest 20v or wait but not sure what rom seems all MM have not been updated.
Click to expand...
Click to collapse
I just checked and no updates yet. Maybe Xposed and magisk are messing with it.

Is there a way to install it with TWRP installed? I got it and the phone rebooted but only to TWRP.

thejaredhuang said:
Is there a way to install it with TWRP installed? I got it and the phone rebooted but only to TWRP.
Click to expand...
Click to collapse
I think since the H811 has an unlocked bootloader the easiest way is going to be flashing the stock recovery through TWRP, reboot, install the OTA, and then fastboot back into TWRP and reinstall it. (Unless it keeps root through Magisk or something and then you can just use the TWRP app rooted to reinstall)

few days after updated, software version changed into H81120x, my camera suddenly and always crashed and getting hot not like usual. please help me fixing this problem

gregoriusaryanto said:
few days after updated, software version changed into H81120x, my camera suddenly and always crashed and getting hot not like usual. please help me fixing this problem
Click to expand...
Click to collapse
is there a KDZ available yet? maybe you need to do a refurbished flash of KDZ. 20x

pizzaboy192 said:
I think since the H811 has an unlocked bootloader the easiest way is going to be flashing the stock recovery through TWRP, reboot, install the OTA, and then fastboot back into TWRP and reinstall it. (Unless it keeps root through Magisk or something and then you can just use the TWRP app rooted to reinstall)
Click to expand...
Click to collapse
I'm not rooted so no worries. Its there a stock recovery image somewhere or do i need to extract one from the 20v kdz

So is there a directory where the OTA is downloaded to? I have the KDZ for 20v but I can't get a valid cab file to extract the DZ when I use LGExtractor (this is when I'm trying to extract the stock recovery.img).

Update file
Here is the update file for 20x, i extracted it from the /cache directory. I tried to flash it via TWRP but there is some ID checker that errors out and fails to install on TWRP
https://1drv.ms/u/s!AvCSuR2bvtpdg9tZBW-m9yVP6gYGng

For help about root
How to root and install twrp... Plzz help me... Given procedure not working stuck to send command port no.. Position.. Plzzz any one give some help or other way to get root and install twrp. My version is lg g4 h811 20x

Somnathdey said:
How to root and install twrp... Plzz help me... Given procedure not working stuck to send command port no.. Position.. Plzzz any one give some help or other way to get root and install twrp. My version is lg g4 h811 20x
Click to expand...
Click to collapse
THIS MIGHT FACTORY RESET YOUR PHONE. BE SURE YOU ARE OKAY WITH THAT.
1: make sure you've enabled Developer Options in settings (go to About Phone, tap the Build Number a bunch until it pops up saying you've enabled developer options.
2: Make sure you've enabled bootloader unlock in Developer options
3: make sure your device's ADB drivers are installed. The phone comes with the resource CD built in, so you can always use that to make sure it is set up
4: run ADB on your computer, type adb reboot fastboot to get into fastboot mode. The phone should reboot. If it does not, recheck steps 1, 2, and 3.
5: type "fastboot oem unlock". This it should report it as OK or Success. If so, type fastboot reboot. It may or may not factory reset your phone at this point. It didn't with mine but YMMV.
6: once Android has booted, follow the steps to install TWRP. Same steps as above but you'll be booting a TWRP image instead and then flashing it.

For help about root
Have tried this mathod bt still not working my phn stuck in fast boot mode.. In command after typing fastboot oem unlock not working.... Plzz send me some working * platform tools for root in which i can start the command and adb

Somnathdey said:
Have tried this mathod bt still not working my phn stuck in fast boot mode.. In command after typing fastboot oem unlock not working.... Plzz send me some working * platform tools for root in which i can start the command and adb
Click to expand...
Click to collapse
Sure thing. You'll get more help though posting a new thread instead of on one unrelated.

gregoriusaryanto said:
few days after updated, software version changed into H81120x, my camera suddenly and always crashed and getting hot not like usual. please help me fixing this problem
Click to expand...
Click to collapse
No problem here, try to reset the phone or at least clear the cache of camera.

So my phone finally presented me with the OTA, but it fails to install because of TWRP (expected). I grabbed the update.zip and did the basic modification to allow me to flash it via TWRP but it still fails. LG Bridge doesn't get past checking software version. I am running stock, rooted with Magisk, RCTD removed and some minor root-free debloat (The "uninstall apps for user 0" trick)
What LG OEM apps are required to get LG Bridge to work?
Edit: Could I dirty flash a full stock ROM over it (including stock recovery) to get the OTA to work and then just debloat again?)

Does the KDZ file only come from LG? I wonder if I can update and then somehow extract KDZ to share with everyone...