Related
Hi, I'm about to go for a Neo (don't need a camera), but the reason i returned my original gear was the "turn your wrist to turn the screen on" motin was either
- Too unreliable - meaning i'd be twisting my wrist like a fool just to see the time
- Annoying when i was playing the piano (screen went on/off like crazy)
I'm wondering if this is improved at all? Also, is it possible to actually turn it off completely?
Shame this watch doesn't have an always-on clock....
A
eurorauser said:
Hi, I'm about to go for a Neo (don't need a camera), but the reason i returned my original gear was the "turn your wrist to turn the screen on" motin was either
- Too unreliable - meaning i'd be twisting my wrist like a fool just to see the time
- Annoying when i was playing the piano (screen went on/off like crazy)
I'm wondering if this is improved at all? Also, is it possible to actually turn it off completely?
Shame this watch doesn't have an always-on clock....
A
Click to expand...
Click to collapse
hi sir, you could actually go to setting, display, then wake up gesture and turn it off. hope this helps.
- Too unreliable - meaning i'd be twisting my wrist like a fool just to see the time
Click to expand...
Click to collapse
this is my first gear I don't know how good/bad the first one was
as far as I can tell: works really great
had no problems so far
- Annoying when i was playing the piano (screen went on/off like crazy)
Click to expand...
Click to collapse
that will never change
you move your arm --> motion sensor activates the screen
what you can do: lower the screen timeout to 10sec or deactivate the motion completely
settings -> display -> wake-up gesture -> off
Code:
https://i.imgur.com/j7Z8mSv.jpg
https://i.imgur.com/3QUdMSD.jpg
https://i.imgur.com/orbiuQ6.jpg
(sorry for the code tag, I am not allowed to post links)
Mine is very flaky. Funny thing is I was missing the way my Pebble worked 95% of the time and meant to ask about this until I ran across this thread. With this, wrist flick is maybe 50%, OR I have to do an exaggerated arm raise motion - I can't just look down and flick my wrist like I would on my Pebble to see anything. Also when it does work, it's slow - there's like a half second where I'm waiting in suspense for the display to wake. Maybe you people that came from the older Gears are used to that and it's ok for you, but with my Pebble I was never waiting - maybe it's due to the fact that Pebble is only turning on the backlight from the sensor, as the display is on all the time.
Which brings me to my biggest frustration. I had hoped that somehow an AMOLED screen could be set up to be always on with just the basic info while still saving battery (like active notifications on the Moto devices). I hope that somehow there's a way to work around this and have a simple info display that could be always on (no colors/animations, just white text on the black background to save power). If i needed to charge every night, that's fine. I'd rather have that than look like/feel like an idiot shaking my wrist around and still not getting it to wake up. That's one of the reasons I returned the Sony smartwatch last year.
I just received my NEO yesterday.
The motion sensor *is* rather sensitive and ANY vertical arm motion with even the slightest twisting kicks the phone screen on. At first it's interesting . . . after a while it's a bit annoying.
I would like to have a self-defined motion, or perhaps a bit more control over exactly when it turns on.
At least it would be better if we could reduce the screen time to 3 or 5 seconds that would lessen the distraction.
I turned the motion sensor off and that's actually pretty good -just got a text message and it displayed correctyl, and for now a quick press to see the time is not bad.
Solution for loss of gesture control on Samsung Gear2 Neo.
eurorauser said:
Hi, I'm about to go for a Neo (don't need a camera), but the reason i returned my original gear was the "turn your wrist to turn the screen on" motin was either
- Too unreliable - meaning i'd be twisting my wrist like a fool just to see the time
- Annoying when i was playing the piano (screen went on/off like crazy)
I'm wondering if this is improved at all? Also, is it possible to actually turn it off completely?
Shame this watch doesn't have an always-on clock....
A
Click to expand...
Click to collapse
Over time my neo appeared to become more and more unresponsive to my wrist movements until it stopped completely and only pressing the button allowed me to see the clock. After reading this post and the replies I decided to press the 're-set Gear' switch in 'Settings' on the Neo. This removes all the stored data from the device and restores the factory defaults.
After restoring the Bluetooth link using the gear manager app on my Galaxy S5 gesture control was restored and worked perfectly. Also I switched off the gesture control using the button in 'Settings' under 'Display' and that worked too.
What I can't tell you is why what I did worked. However as the onset of the problem was gradual it might suggest that it might be related to a gradual build-up of data in the Neo's memory that might be a factor affecting the device's performance. I suspect more time deleting alerts and notifications might help, or if you're not using your neo to play music or store photos and videos you could just do what I did as and when the need arises while we wait for Samsung to supply a system upgrade to solve the problem.
I hope this reaches you in time to stop you sending your Neo watch back as I have become very fond of mine. I too play pianos and synths but I've always taken off any watches before playing out of personal preference, but we can always switch our Neos' gesture control off while playing, but beware of any mics nearby picking up it's chimes!
My Neo is no longer responding to the wrist motion. I've tried resetting it to stock numerous times, and reloading (never restoring) all the software.
Could it be that the motion sensor has failed?
I got this in Dec 2014, and I'm really disappointed that this has happened already. It was easily my favorite feature.
Is there any test, or diagnostic I can run to confirm my suspicions?
Samsung Gear S2 Smartwatch Wakeup Gesture Doesn't Work
I had the same problem with my Gear S2. Tried everything, including disabling "Do not disturb", but wakeup gesture still didn't work. Reported problem to seller who sent another S2, but it also did not work.
Hi all, just got myself a LG GWatch R, and loving it so far...
Just a couple of questions...
1: The screen keeps lighting up when i move my arm?, this is causing extra battery drain and i dont want this to happen, ive already set the screen to always on in ambient mode so wht does it keep turning on to full?
2: It keeps saying google now is not available even though its connected? Annoying.
3: The same cards keep appearing even though i have swiped them away. Why?
hi,
try a reset of lhe lg r
Have you run all updates? Yes a reset may be in order.
mitchellvii said:
Have you run all updates? Yes a reset may be in order.
Click to expand...
Click to collapse
Updated yes, reset why? its a feature of the watch that needs to have a disable option. Its supposed to do it, but i dont want it to.
jrvenge said:
Hi all, just got myself a LG GWatch R, and loving it so far...
Just a couple of questions...
1: The screen keeps lighting up when i move my arm?, this is causing extra battery drain and i dont want this to happen, ive already set the screen to always on in ambient mode so wht does it keep turning on to full?
2: It keeps saying google now is not available even though its connected? Annoying.
3: The same cards keep appearing even though i have swiped them away. Why?
Click to expand...
Click to collapse
1) You can no do that. Just mute notification by swipe down watch status bar, it mute notification and disable the lightin up movement.
2) It need BT connected watch/phone AND valid internet connection on phone.
3) card appear when phone send notification. If card appearing after swipe, it is your phone wich notify again.
1: STUPID, I dont want to turn my buzzer of to stop the screen lighting up.
2: All is connected but the watch does it constantly.
3: Cards dont appear on phone just constantly on the watch?
jrvenge said:
1: STUPID, I dont want to turn my buzzer of to stop the screen lighting up.
2: All is connected but the watch does it constantly.
3: Cards dont appear on phone just constantly on the watch?
Click to expand...
Click to collapse
which particular card is annoying you? i do find the light up mechanism is annoying as if i turn my wrist to do something and the screen just light up.
i wish google or LG is able to come up a new features to stop the auto light up function by movement. on pebble, you can disable such function...why google cannot..
Well I tried emailing them about it. But after sitting there for half an hour entering crap just to send an email I gave up.
I'm on holiday this week. And I keep getting a card saying holiday all day. But this keeps popping up about 20 times a day. Doesn't appear on the phone just the watch.
According to the screenshots in this article covering the upcoming Android Wear 5.0 Lollipop, we will be able to disable the wake gesture!
have a close look at the screenshots of the AW phone app, there is an option "Tilt to wake screen"
the holiday is mark in your google calendar? if you didnt connect the phone with watch..did it happen?
No its coming from the phone. But I don't understand why it appears all the time instead of once
I would also like it too not light up every time I move! I have turned off all gestures and tilt to wake but it still lights up. Just want to tell the time not let everyone know im wearing a smartwatch.
- Sometimes the watch does not show any notifications anymore. Restarting the Watch "fixes" this behaviour
- Theather Mode is great. However it does not even vibrate anymore. At least there should be an option to keep the watch vibrating.
- After directly archiving a Gmail Notifcation it vibrates again. Why? Didnt do it on kitkat and i see no reason for it despite using more battery juicy.
Regards,
Fabio
dilorenzo said:
- Sometimes the watch does not show any notifications anymore. Restarting the Watch "fixes" this behaviour
- Theather Mode is great. However it does not even vibrate anymore. At least there should be an option to keep the watch vibrating.
- After directly archiving a Gmail Notifcation it vibrates again. Why? Didnt do it on kitkat and i see no reason for it despite using more battery juicy.
Regards,
Fabio
Click to expand...
Click to collapse
1 confirmed, noticed the same. Only reboot of watch helps. Occurred 2 times.
2 agree.
3 don't get many Gmail notifications, so cannot say anything about it.
My watch vibrates without reason when it is on the charger. Tried resetting my clock, put in silent mode, theater mode and even flight mode and it still vibrates. It doesn't vibrate Al the time, once every 5-10 minutes and some times more. It works fine out of the charger, no issues at all.
Didn't have this problem before update to 5.0.1
fredriks said:
My watch vibrates without reason when it is on the charger. Tried resetting my clock, put in silent mode, theater mode and even flight mode and it still vibrates. It doesn't vibrate Al the time, once every 5-10 minutes and some times more. It works fine out of the charger, no issues at all.
Didn't have this problem before update to 5.0.1
Click to expand...
Click to collapse
See here for vibrations on cradle
http://forum.xda-developers.com/showthread.php?t=2942451
Sent from my C6833 using XDA Free mobile app
fredriks said:
My watch vibrates without reason when it is on the charger. Tried resetting my clock, put in silent mode, theater mode and even flight mode and it still vibrates. It doesn't vibrate Al the time, once every 5-10 minutes and some times more. It works fine out of the charger, no issues at all.
Didn't have this problem before update to 5.0.1
Click to expand...
Click to collapse
This is by design and indicates when the watch connects/disconnects to/from the phone. When it connects to the phone, it vibrates once; when it disconnects, it vibrates twice.
If you reboot your phone, the watch will vibrate twice when the phone's Bluetooth turns off and once when it turns back on. Or when you leave the watch on the cradle and walk away from it with your phone far enough to lose the Bluetooth connection, it will vibrate twice to let you know it disconnected from the phone. When you get back within range, it will vibrate once to let you know it reconnected to the phone.
siraltus said:
This is by design and indicates when the watch connects/disconnects to/from the phone. When it connects to the phone, it vibrates once; when it disconnects, it vibrates twice.
If you reboot your phone, the watch will vibrate twice when the phone's Bluetooth turns off and once when it turns back on. Or when you leave the watch on the cradle and walk away from it with your phone far enough to lose the Bluetooth connection, it will vibrate twice to let you know it disconnected from the phone. When you get back within range, it will vibrate once to let you know it reconnected to the phone.
Click to expand...
Click to collapse
Not always. See the link I posted above. My watch would vibrate at random while charging and the phone was on the cradle charging (and turned on) it would appear that the watch was possibly not getting a high enough current at times due to the phone charging.
Sent from my C6833 using XDA Free mobile app
I have also this issue (on R and G watch). It is when contact is not well between watch and dock. Seem OK but I must press watch to ensure right contact without vibrate signal for charge ON/OFF. Look at your charge icon on watch when vibrate to see if it is good
Thanks all for your info. I have my phone off during night maybe this is a new feature that reminds you about lost connection to the phone ? Tried all other suggestions with no luck
dersie said:
I have also this issue (on R and G watch). It is when contact is not well between watch and dock. Seem OK but I must press watch to ensure right contact without vibrate signal for charge ON/OFF. Look at your charge icon on watch when vibrate to see if it is good
Click to expand...
Click to collapse
Had the same last night, noticed that my watch was waking up (just like me ) several times. Secured it better in the dock and all well again.
Removed wear mini launcher to see if that solves the "not receiving notifications anymore" problem (which was easily cured by a reboot of the watch). After removing wear mini launcher I also had to restart the watch because notifications did not work anymore, so it could be related.
dilorenzo said:
- Sometimes the watch does not show any notifications anymore. Restarting the Watch "fixes" this behaviour
- Theather Mode is great. However it does not even vibrate anymore. At least there should be an option to keep the watch vibrating.
- After directly archiving a Gmail Notifcation it vibrates again. Why? Didnt do it on kitkat and i see no reason for it despite using more battery juicy.
Regards,
Fabio
Click to expand...
Click to collapse
Item 1 - I faced the same problem intermittently. The notifications come back again after I manually displayed the previous message (the one without notification) on the watch.
RayHK said:
Item 1 - I faced the same problem intermittently. The notifications come back again after I manually displayed the previous message (the one without notification) on the watch.
Click to expand...
Click to collapse
?? how do you mean that, displaying the previous message without notifcation?!
dilorenzo said:
?? how do you mean that, displaying the previous message without notifcation?!
Click to expand...
Click to collapse
Let me try to explain my case:
- when this issue first happened, my watch did not display the notification when the notification is received on my phone
- I then swiped the screen of my watch to check if the notification was transferred to my watch or not although it was not displayed
- After swiping, the missing notification displayed on my watch immediately which indicated that the message was transferred to my watch although it was not displayed
- After the above actions (swiping and read the notification), my watch was back to normal for a while (the notifications could be displayed on the watch automatically).
I repeat the above actions every time when I noticed the notifications could not be displayed automatically.
RayHK said:
Let me try to explain my case:
- when this issue first happened, my watch did not display the notification when the notification is received on my phone
- I then swiped the screen of my watch to check if the notification was transferred to my watch or not although it was not displayed
- After swiping, the missing notification displayed on my watch immediately which indicated that the message was transferred to my watch although it was not displayed
- After the above actions (swiping and read the notification), my watch was back to normal for a while (the notifications could be displayed on the watch automatically).
I repeat the above actions every time when I noticed the notifications could not be displayed automatically.
Click to expand...
Click to collapse
I have same issue few times since the last update
It is strange to ear the notification sound and see nthing on watch, I look at phone and I see the notifcation icon on notification bar and all like you.
This Wear update sucks horribly. I've had this watch, GWR,for two weeks. I like it. Wear is complete garbage. Notifications randomly stop pushing to watch, reboot to temporarily fix. Randomly get 'offline' message despite showing 'connected' in Wear app, reboot fixes temporarily. Upon giving voice command, watch occasionally displays 'offline' message despite a strong data connection, usually no more notifications with this as well, reboot to fix. Battery life is 14 hours at best. So at the end of the day, I have a 300$ AMOLED watch. I bought this device so I could keep my phone in my pocket...this happens about one fifth of the time. The rest is me rebooting, uninstalling, reinstalling toggling Bluetooth and now randomly checking my phone to see what I'm missing because the toy on my wrist is totally unreliable. Nice work Google.
Stbrightman said:
This Wear update sucks horribly. I've had this watch, GWR,for two weeks. I like it. Wear is complete garbage. Notifications randomly stop pushing to watch, reboot to temporarily fix. Randomly get 'offline' message despite showing 'connected' in Wear app, reboot fixes temporarily. Upon giving voice command, watch occasionally displays 'offline' message despite a strong data connection, usually no more notifications with this as well, reboot to fix. Battery life is 14 hours at best. So at the end of the day, I have a 300$ AMOLED watch. I bought this device so I could keep my phone in my pocket...this happens about one fifth of the time. The rest is me rebooting, uninstalling, reinstalling toggling Bluetooth and now randomly checking my phone to see what I'm missing because the toy on my wrist is totally unreliable. Nice work Google.
Click to expand...
Click to collapse
What kind of phone is your watched paired with? I get about 2.5 to 3 days on a charge. Everything is rock solid for the most part. The only thing I'm pissed about is I keep getting my step count card even though I tried fit notifications off.
Sent from my HTC One m8
fr0st420 said:
What kind of phone is your watched paired with? I get about 2.5 to 3 days on a charge. Everything is rock solid for the most part. The only thing I'm pissed about is I keep getting my step count card even though I tried fit notifications off.
Sent from my HTC One m8
Click to expand...
Click to collapse
I'm paired to an LG G2 rooted on xdabbebs 2.2.0. I can stretch my battery further but I chose to leave screen always on, skymaster face with ambient on level 3-4. 2-3 days is believable if your screen is off, backlight low, using theater mode here and there.... everyone's mileage will vary for sure but mine was definitely low.
I think I may have figured out what is causing the random disconnects and could be to blame for higher battery consumption. I'm gonna wait until tonight and see if my connection remains solid before I get too excited.
So far so good though after 12 hours.
Stbrightman said:
I think I may have figured out what is causing the random disconnects and could be to blame for higher battery consumption. I'm gonna wait until tonight and see if my connection remains solid before I get too excited.
So far so good though after 12 hours.
Click to expand...
Click to collapse
Any more info on what you think may be causing this ?
jester27 said:
Any more info on what you think may be causing this ?
Click to expand...
Click to collapse
I think it has a lot to do with a setting in Bluetooth on my LG G2 that is labeled 'connectivity authorization' or something like that. I have to go in and re-tick 'automatically' every time I cycle Bluetooth on/off or reboot phone, as it defaults to 'always ask' and that is when I get the fast battery drain and connectivity issues. The other issue is that I fly for a living, generally two legs a day, so I am constantly switching into airplane mode on phone and watch and it seems that a huge drain occurs upon landing and coming out of airplane mode. After a bit the drain tapers off.
I'm looking more for a fix for the constant disconnections
My battery is fine I've had 2 days out of it and it's normally more than 50% by the end of the day
If you haven't tried already, reset the watch and make sure you pair it with the Wear app, not thru Bluetooth settings. Do you have the option in your phone Bluetooth menu under the connected watch to change the connectivity from 'always ask' to 'automatic ' ? I'm 90% sure this is causing my problems.
I have an LG G Watch R.
immediately after this update about 1.5 weeks ago that I installed my watch no longer functions as it functioned before.
I no longer get call notifications on the watch. previously when a call came in the watch would start vibrating the caller image would appear and I could answer or ignore from the watch.
this no longer occurs (HUGE functionality loss for me)
also "always on" no longer works. it always turns off VERY rapidly after a few short seconds and you can only turn it on again by pressing the button. no "ambient" mode any more.
and of course since ambient is off (I assume) twist to full on does not work anymore
touch will not wake it up twist will not wake it up ONLY pressing the button.
suggestions? these are simply massively functionality losses to me I flat out would not have bought it if it functioned this way when I got it. what's the point?
I am hoping this is something I can fix. yes I checked android wear no joy. I uncheck and recheck always on and the watch comes on for a second and then goes off again. still have to press the button to make it live again.
Cinema mode activated?
Sent from my SGP611 using XDA Free mobile app
What is that? I do not see anything called cinema mode anywhere?
On active screen swipe down from the top and then wipe left. You will see Cinema mode and Sunlight boost.
Tonio78370 said:
On active screen swipe down from the top and then wipe left. You will see Cinema mode and Sunlight boost.
Click to expand...
Click to collapse
That, or you can push the button twice really fast. Does the same thing, just quicker...
Thank you so much both of you that was exactly the problem watch is working normally now double tap and I noticed there was a tiny little icon in the middle of the screen look kind of like a little microphone icon the line through it very tiny but now I know what to look for if it happens again again thank you
When I bought the watch back in November, the screen would stay ON all the time. I know it to be a fact because I used to leave it on a desk without ever touching it (for hours) and it would always display the time (it was like having a desk clock, for when I would rather not wear it to have more comfortable wrists while writing or that sort of things).
Also in the train (I used to travel a lot in that period) I would leave the watch hung on the wall while sleeping (at night) and it would not turn itself off, so I could check the time in case I woke up in the middle of the night, without neededing to reach for the watch.
Recently (it was January) I noticed that it does not work like that anymore. After a very short time, the watch screen goes off. It is still in standby: it goes back on if I touch it or press the button.....but I want it to stay on 'without limits' (in dimmed mode). It was like that before.
Somehow this is the behaviour of the 'keep screen always ON' setting.....but in fact, that setting is already set to 'ON'.
So is there some kind of firmware update that changed this behaviour? I would like the clock to not go off when it is not on my wrist, sometimes I just need to keep track of time AND have my wrists free....and it is not possible anymore.
nothing?
It is actually a key feature....no point in having a watch that doesn't show the time unless you touch it (if you leave it on a desk or simply hung on a wall at night). Also I wonder why it changed (did not do this last year so I thought it must be some update but could not find anything in the changelogs about this).
You have the Setting enabled in Android Wear for keeping the screen Always On?
My screen only goes out when on the charger. When I had a Samsung Gear Live, it would stay on while on the charger, via the Developer Setting on the watch to keep the screen on while charging. But that has never worked for me on the "R", not even last year.
The screen of the watch goes off while charging (although I remember it being different back in October...).
The settting for 'screen always on' is activated. I activated from the watch, from the phone, restarted the watch, nothing worked. The screen goes off after a while IF I DO NOT wear the watch.
No problem if I wear it....that means there is some connection between the screen going off and the accelerometer :-/
But as I said, I need the watch to stay on even if I am not wearing it (working at a desk or similar when I can't wear the watch, I would look at the time at the watch lying on the table). I am sure 1000% it did not turn off before (started in January, or at least I noticed it in January). I read all the changelogs for all the updates and I did not find anything about this.
Can someone also try? My brother has the same watch and his also goes off if he does not wear it. I find this really unneeded. At least they should have put a setting available.
You best option is Wear Charging Widget. It will keep the screen on when charging. Although it does dim a bit, like a night clock in a mostly dark room. It is the only option I've found that works.
I wanted the "R" to work like my old Gear Live and keep the screen on when charging and even when not wearing it. But I've never found a means for that to happen short of Wear Charging Widget.
Sent from my Nexus 10 using Tapatalk
Darnell_Chat_TN said:
You best option is Wear Charging Widget. It will keep the screen on when charging. Although it does dim a bit, like a night clock in a mostly dark room. It is the only option I've found that works.
I wanted the "R" to work like my old Gear Live and keep the screen on when charging and even when not wearing it. But I've never found a means for that to happen short of Wear Charging Widget.
Sent from my Nexus 10 using Tapatalk
Click to expand...
Click to collapse
Yes it looks it is like that now. Maybe you bought the watch after the two last updates (501 / 502) ?
Would be nice if somebody else, besides me, could confirm that in fact the watch was staying on (dimmed mode) all the time even without wearing it in the previous months (release date to December).
rogermorse said:
Yes it looks it is like that now. Maybe you bought the watch after the two last updates (501 / 502) ?
Would be nice if somebody else, besides me, could confirm that in fact the watch was staying on (dimmed mode) all the time even without wearing it in the previous months (release date to December).
Click to expand...
Click to collapse
I've had my "R" since last year, before v5 came out for the watches. And the "R" never kept the screen on while charging. I never noticed it involved simply not wearing it. Since when I'm not wearing, I'm charging.
Sent from my Nexus 10 using Tapatalk
Screen shuts off completely
The screen on my GWR has started shutting off, completely dark not dim. I checked the settings and it is set to "Always on screen": ON.
This is a fairly new problem, it did not used to behave this way, I could see the screen dim, and move my wrist and it would go bright and display "OK Google".
Any ideas on how to fix this bug? Or do I/we need to wait for a software update/fix? Current software version: 5.0.2
Watch is not very useful if I can't see the time without having to push the crown/button.
Anyone else having this issue?
Screen is working again.
Had some time to try some options, did a "Reset Device" and the screen came back.
Lost all the apps I had loaded on the watch, not a big deal, wasn't using many of them.
Guess I can just download them again from the play store, if I want them back. Something I loaded onto the watch may have caused the loss of the screen.
Last couple of apps I downloaded were CompassX and a charging app that shows charging progress while charging.
Glad to have the watch face back.
I'm having the same problem as you. The ambient mode won't come on. Instead of dimming to ambient mode it now just goes dark completely (like when it is charging). I would love another fix before I have to reset the watch. Any ideas?
2leaponover1 said:
I'm having the same problem as you. The ambient mode won't come on. Instead of dimming to ambient mode it now just goes dark completely (like when it is charging). I would love another fix before I have to reset the watch. Any ideas?
Click to expand...
Click to collapse
Bumping this. I reset the watch. Went about two weeks and now back to the same problem. Ambient mode has disappeared. It's just black all the time until i turn it back on.
2leaponover1 said:
Bumping this. I reset the watch. Went about two weeks and now back to the same problem. Ambient mode has disappeared. It's just black all the time until i turn it back on.
Click to expand...
Click to collapse
The user support for this watch is non-existent Still no help with this problem
2leaponover1 said:
The user support for this watch is non-existent Still no help with this problem
Click to expand...
Click to collapse
I confirm that I have this trouble also in normal use, previously it worked fine and would stay on all the time if that's what I wanted.
Am very tempted to reset the watch after backing up.
I have nearly the same problem. For months now, when my screen dims, it goes to a very dark/dim red. I've removed all programs from my phone and did a factory reset on the watch three times. I'm not sure what else to try. Is there a way to flash the memory? It seems like a setting is stuck in the non-volatile memory.
I was having the same problem and found that I had theater mode set on. Switched to off and now works great.
Sent from my Nexus 6 using Tapatalk
Check your theater mode setting.
Turning mine off worked.
extrabilly said:
Anyone else having this issue?
Click to expand...
Click to collapse
I'm experiencing the same. On my watch it seems to be somehow related to accelometer. Almost everytime, when using LG G Watch R in golfing, it starts to shut down the screen. It doesn't wakeup even when tapping the screen.
I haven't found other solution than resetting the device
Same issue with 5.1.1
I had this issue with 5.0.2 and hoped that the next update would solve it but sadly it persists in 5.1.1 .
Theatre mode is off, Always on is on but still the screen blanks, showing the ambient mode screen briefly before blanking.
I've reset multiple times, occasionally Always On comes back but only for a short while.
Always on is a feature I really like
Fixed it on mine
I had to turn wrist gestures on. With it off screen on doesn't work.
I have the exact problem on my GWAR, software version 5.1.1. I bought my in December and it never happened until now. It started happening yesterday all of a sudden. I tried factory reseting it through bootloader, throught settings, uninstalling the Wear app, uninstalling the watchface i was using, and still nothing.
Here is what I did to fix it (and i know its overkill): Uninstall Wear app, clear google play services data and reset the device through settings. Now it's finaly working.