Q&A for [Kernel] TRIM: Speeding up the Galaxy Note n7000
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Kernel] TRIM: Speeding up the Galaxy Note n7000. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Will it work on Carbon ROM
Hello Lanchon and thank you for your wonderful work!
I came across this thread by chance and wasn't aware about all this trim issue on n7000 device. I even didn't know it exist at all. I'm total noob and after few days of reading and studying everything about this matter on this thread I would like to ask a question and if you would be so kind to help me. I'm running Carbon Rom KK-NIGHTLY-20141103-0241 with 3.0.64-OMNI-g8d8c8b3 kernel. Is it safe to flash your Trim-FPBug kernel with this ROM or should I flash CM11 nightly ROM first and then corresponding kernel?
Thank you in advance !
zelen said:
Hello Lanchon and thank you for your wonderful work!
I came across this thread by chance and wasn't aware about all this trim issue on n7000 device. I even didn't know it exist at all. I'm total noob and after few days of reading and studying everything about this matter on this thread I would like to ask a question and if you would be so kind to help me. I'm running Carbon Rom KK-NIGHTLY-20141103-0241 with 3.0.64-OMNI-g8d8c8b3 kernel. Is it safe to flash your Trim-FPBug kernel with this ROM or should I flash CM11 nightly ROM first and then corresponding kernel?
Thank you in advance !
Click to expand...
Click to collapse
my kernels are for CM. that is very clear in the OP! your case is covered in post #2
how
howww
Related
[Q&A] [kernel] Collection of kernels from different Custom-ROMs for S3mini - i8190
Q&A for [kernel] Collection of kernels from different Custom-ROMs for S3mini - i8190
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [kernel] Collection of kernels from different Custom-ROMs for S3mini - i8190. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
My wifi doesn't work, I use cm rom by novafusion.
edgar tapia said:
My wifi doesn't work, I use cm rom by novafusion.
Click to expand...
Click to collapse
My doesn't work neither
Sent from my GT-i8190 using XDA Premium 4 mobile app
Hello together,
@1N4148, thanks for this great kernel
I use it since a couple of days without any reboot or other bugs. My experience is: when i use zzmoove governor with profile 5, i have a display on time of 6,5 hours. It´s great :victory:.
Greatings K.
[Q&A] [ROM][AROMA][DEODEX]DMod v6-- S4 Theme&Apps - DMod goes opensource![24/06/2013
Q&A for [ROM][AROMA][DEODEX]DMod v6-- S4 Theme&Apps - DMod goes opensource![24/06/2013]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][AROMA][DEODEX]DMod v6-- S4 Theme&Apps - DMod goes opensource![24/06/2013]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Hey guys, I'm looking for a faster ROM than the stock one, for my gf's phone. It has to be a stable one, so I was looking at this one, but I saw the thread has not had many replies the last few months. Is it still a good rom to install? I saw someone mention an old baseband, what is the problem with this?
Best Room
This room is realy good. Thanks.
Q&A for [ROM][KK][4.4.4][03/07/14] CyanAOSP KK4.4 v4.0.0
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][KK][4.4.4][03/07/14] CyanAOSP KK4.4 v4.0.0. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
NEWBIE
Good day sir, I have Samsung Galaxy S GT i9000, Build number 2.3.6 lidroid-i9000-1.2 my question is it safe to or is it okay to flash your rom without upgrading to ics,jb or any? Your help would be greatly appreciated. Thanks
You can use this guide . It has all you need, and to answer your question it's better to climb the ladder, step by step. So gb>ics>jb>kitkat. Remember, you don't have to use each one of them.Install then reboot recovery and so on...
GApps link is down.
Q&A for Macor, list of all best ROMs for I9300
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Macor, list of all best ROMs for I9300. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Andr3y29 said:
Actually, there is another thread on this forum. And it actually contains like 95% of the ROMs, not 5 of them.
Click to expand...
Click to collapse
not much of a useful comment if you don't provide the link to that thread you mention
rhrs1987 said:
not much of a useful comment if you don't provide the link to that thread you mention
Click to expand...
Click to collapse
really ? Are you quoting me on a half year post ? And if you wanna know, there is a search button.
best and latest ROM for galaxy s3 i9300
Hi,
Can I use this ROM for samsung galaxy s3 i9300..
Please reply me.
currently I am using CM11 nightlies. but it has big bug about CAMERA..
everytime it pings up..CANT CONNECT TO CAMERA. even i have applied some patches..but not working
So can you suggest any best ROM for Samsung GalaxyS3 i9300. It should be latest and bugfree.
Please let me know.
Thanks,
Minesh B. less
Thanks
Samsung bases mode
Q&A for [KERNEL] black crush fix
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL] black crush fix. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
I tried this kernel BlissPop and going great. Perhaps in the future you can upgrade with new kernel versions Bauner.Good job!:good:
Teo57 said:
I tried this kernel BlissPop and going great. Perhaps in the future you can upgrade with new kernel versions Bauner.Good job!:good:
Click to expand...
Click to collapse
It is a very small change. (except for the calibration)
I would hope that bauner would use it in his kernels.
ruleh said:
It is a very small change. (except for the calibration)
I would hope that bauner would use it in his kernels.
Click to expand...
Click to collapse
I used 4 different rums 5.1.1 N7000 and all go. I love working with TWRP not given me any error to restore backup.
Waiting for update if something new kernel's Bauner
Thanks again! :good: