Database Develop

ADB device offline

I've been using ADB the last couple of days to install apps on my Captivate and all of the sudden it stopped working today.
When I type 'adb devices' the phone comes up right away, but it shows offline.
I have tried reinstalling the drivers and Android SDK, but no luck. I've searched around and found some others with this issue, but haven't really found a fix that works for me.
Any idea why ADB would just stop working like that? I even performed a factory reset of the phone and put everything back to defaults.

Ok I almost pulled my hair out, but I found the problem.
For some reason, ADB does not work with the Samsung USB cable that came with the Captivate.
I switched to another USB cable and it works just fine.
Man, I really thought I was going crazy.

wimbet said:
For some reason, ADB does not work with the Samsung USB cable that came with the Captivate.
I switched to another USB cable and it works just fine.
Click to expand...
Click to collapse
What the hell is that about!? I wish all these companies would stop trying to break from standards by proprietizing common cables.

I can't get the drivers to work. Where did you get yours?

Ok I almost pulled my hair out, but I found the problem.
For some reason, ADB does not work with the Samsung USB cable that came with the Captivate.
I switched to another USB cable and it works just fine.
Man, I really thought I was going crazy.
Click to expand...
Click to collapse
Yeah I buy that, I couldn't even get the thing to try and connect at all with out switching usb connections on my computer.

stock cable works. I just rooted and ran into that problem. In order to get around it if you cant get a diff cable, make sure that b4 you connect your phone to your pc you turn off your internet so it doesnt auto dl the drivers. b4 u connect, dl the drivers for your phone from the root thread. Plug your phone into ur comp with the internet off and close any pop ups. Go to device manager look for the notification labled usb or captivateand right click and select update. Select search from file on disk or select file (something like that, i forget) and scroll and select the folder where you extracted the usb drivers. Make sure the checkbox that says search subfolders is checked and click next to install. two more drivers will pop up in device manager after u install the first one. Repeat the same procedure for both of them and then you should be able to use adb just fine to root.

Just wanted to further confirm that using a different microusb cable works! I keep reinstalling the drivers but it kept showing the device was offline. Then I tried my old Nokia N85 cable and it worked like charm! So weird how usb cables aren't made equally, unless Samsung designed the cable to prevent using adb?

I had this issue for a little while, but I installed the Samsung Kies software (which contains drivers) and uninstalled the ADB drivers I had originally downloaded. It's worked like a charm since then.
Go to SamsungApps.com and then use the canada site, as the software isn't really available in the US yet.

I have had no problems using the stock cable on my Laptop and work PC, both are Win 7 32bit. The same cannot be said for my my main home PC which is Win 7 64bit. Neither the stock cable nor an after market cable worked with ADB.
For the 32bit OSes I installed the Kies software and the usb device gets installed correctly. for the 64bit OS, I installed the Kies software but could get the phone to connect correctly. I then tried to install the 64bit drivers that are floating around the web. The 64 bit drivers worked enough to get the phone connected to the PC but when I tried to query "adb devices" the phone would always appear as offline. I've tried several things: install/uninstall drivers and software on the PC, restart the PC and Phone, change cables. Nothing seems to help on Win 7 64bit.
It seems to me that there might be a bug in the 64bit driver, though I have no proof of a bug.
I am going to keep playing with the 64bit OS until i figure it out or get so annoyed a that I just give up.
I'll be using my Win 7 32 bit laptop until I get the 64bit PC to work.

TimF said:
I have had no problems using the stock cable on my Laptop and work PC, both are Win 7 32bit. The same cannot be said for my my main home PC which is Win 7 64bit. Neither the stock cable nor an after market cable worked with ADB.
For the 32bit OSes I installed the Kies software and the usb device gets installed correctly. for the 64bit OS, I installed the Kies software but could get the phone to connect correctly. I then tried to install the 64bit drivers that are floating around the web. The 64 bit drivers worked enough to get the phone connected to the PC but when I tried to query "adb devices" the phone would always appear as offline. I've tried several things: install/uninstall drivers and software on the PC, restart the PC and Phone, change cables. Nothing seems to help on Win 7 64bit.
It seems to me that there might be a bug in the 64bit driver, though I have no proof of a bug.
I am going to keep playing with the 64bit OS until i figure it out or get so annoyed a that I just give up.
I'll be using my Win 7 32 bit laptop until I get the 64bit PC to work.
Click to expand...
Click to collapse
i've been able to install .apk's with my win7 64-bit ADB :O
all i did was install Samsung Kies.
i don't think i've ever had a problem...?
EDIT: i'm using the cable that came with it and no problems yet.

I'm running win 7 x64 and Kies did the trick for me. I haven't had a single issue connecting my phone since I did that.
Sent from my SAMSUNG-SGH-I897 using XDA App

Justa dding to the anecdotes.
I was having problems with the included cable using the front USB. It would show as Device Offline, also the charging wasn't very strong.
I switched to the onboard USB at the back of the case, and adb worked fine with the included cable.
Looks like I'll be picking up a couple extra USB cables so I won't have to continuously do the desk dive everytime I need to use it somewhere else.

1. I installed the kies drivers first and it would say offline when i checked the device through the cmd prompt.
2. I then installed the adb drivers and it then said the device was online.
3. i then rooted the phone and went on my way. i then tried it a second time and it said device offline.
4. nothing changed during this time except that i turned off debug mode, changed it to mass storage and plugged it back into the usb to transfer some files.
5. on returning to debug mode it no longer tells me the device is online. i have tried different USB ports as well.
6. i deleted the drivers, and reinstalled and it still says offline.
very frustrating.

wow. i forgot to try plugging it into another USB port. that worked. sorry about previous post.

I am running Windows 7 Home Premium 64bit on my laptop,
I installed the samsung 64bit drivers, it was an installer i found on the web, not the kies installer packaged driver one.
i changed my setting on my captivate to Mass Storage.
I mounted usb and everything works, by that I mean i was able to ADB like no tomorrow without any issues.
Then I made the mistake of installing Samsung Kies and that messed up my previous drivers and I wasnt able to ADB to my phone. I had to uninstall Samsung Kies and my phone still wasnt being found I still couldnt ADB.
my solution to fixing was restarted my phone and computer, without my phone connected to USB i re-installed the Samsung 64bit Driver Package, then hooked up my phone made sure Mass Storage was selected and Mounted USB and bam was able to ADB again.
hope this helps! also i have been doing videos helping people with issues with samsung's captivate on youtube, youtube.com/johnnyzappone if anyone wants to check em out, if anyone has any suggestions please let me know and id be happy to release a video!

I resolved my issues, I plugged the stock cable into one of the rear usb ports and the device is now available on my main PC Win 7 64 bit.

wimbet said:
Ok I almost pulled my hair out, but I found the problem.
For some reason, ADB does not work with the Samsung USB cable that came with the Captivate.
I switched to another USB cable and it works just fine.
Click to expand...
Click to collapse
Confirmed this made my device stop appearing as offline with adb.
How it is even possible that the cable prevents (only) adb access on the PC, I have no idea.

I have windows 7 and mac osx and I can use adb with both using the stock USB.
i have debugging active.

lol @ the samsung cable.
i've 2 indentic cables here, one doesn't work. plugged in the other one and this one works...
maby its just a strange issue on windows, next time try to pull out the cable and put in back in then connect your device again this should work.... :s
because earlier the cable just worked fine and now it doesn't.. so good luck xD

joelpt said:
Confirmed this made my device stop appearing as offline with adb.
How it is even possible that the cable prevents (only) adb access on the PC, I have no idea.
Click to expand...
Click to collapse
also can confirm PITA

[Q] USB Doesn't Recognize with all drivers and method.

Hello,
I am newbie here.
I have my captivate since January. I like the device itself very much.
However, I wasn't able to update the firmware to Froyo or Gingerbread at all due to a lot of difficulties that I faced.
My phone is ROOT(just to confirm, I have 'superuser' app - does that mean my phone is ROOT?).
I used to have laptop with linux 10.04, and believe or not it was so difficult to ROOT my phone.
However, I have Win7 64bit Professional currently.
And trying to upgrade to Gingerbread. (My phone is 2.1 firmware as of now.)
The problem that I'm facing is that my phone won't recognize at all when I plug into USB ports.
These are what I've tried so far,
(on both USB debugging mode & mass storage mode)
- Yes, I tried several different ports as of suggestions from other post.
- I tried to install & re-install drivers. (I tried SGH-i897_Captivate_USB_Drivers_5_02_0_2.zip driver & Samsung Galaxy S USB Driver for Windows x64)
- I did restart my computer more than 10 times.
- I installed current kies and re-install several times.
- I installed older version of kies 1.xxxx.
- I did delete drivers from device management.
I am really running out with ideas to solve my problem.
I've been researching a lot & can't find any more solutions.
CAN ANYONE HELP???
Thanx!!!

Have you tried a different USB cable? Preferably the one that came with the phone (unless that's the one you're using now, of course)?

apbthe3 said:
Have you tried a different USB cable? Preferably the one that came with the phone (unless that's the one you're using now, of course)?
Click to expand...
Click to collapse
The cable that came with the Captivate is known to not work with all computers (my guess is it's some sort of voltage range it doesn't like). There are a few threads on this in this forum.
My suggestion is to get a Motorola cable. Here's why:
My stock Samsung cable that came with my Captivate worked on my old PowerMac G5, but not my brand new iMac. I thought it was an attempt by Apple to deny use of Android phones on their machines.
I tried using a store-bought USB cable by RocketFish. It still didn't work.
Out of desperation, I tried the Motorola cable that came with my wife's Bravo, and the phone connected with no problem.
From your description, it sounds like you could connect on an old computer/OS combo, but not with a new computer/OS combo. So try to get your hands on a Motorola cable (or other third-party cable) and try that.

@ apbthe3 yes, I am already using the cable that came with the phone. Thanx!
@ KreepyKen I did try the cable that I have with on a mac computer and the mac seems like not recognizing either. I'll go to AT&T shop to see if they can try with motorola cable. Thanx!

[Q] Windows 7 64bit USB driver intended for Samsung Galay Note GT-N7000

Hello XDA developers / forum users,
Finaly I've buyed myself a (very) nice phone: The Samsung Galaxy Note GT-N7000 .
I'm really happy with it, but I've a smal problem with connecting my phone by USB to my Windows 7 64bit computer. I can't get it working.
Not with Kies, not with installing just the driver, nothing seems to help.
Hopefully someone overhere has had the same problem which has been solved already ......
I've searched your forum and also the internet for the solution and/or work arround, but couldn't find anything what helped.
I'm sorry when I've missed the topic on your forum, if so please post the link.
I hope someone can help me out with this isue,
Thanks in advance,
nldark

http://forum.xda-developers.com/showthread.php?t=1424997
Read first few line of main post, you will find both 32/64 bit driver
Sent from my GT-N7000 using xda premium

Thanks dr.ketan for your reaction,
Unfortunately it's still not working ....
By the install procedure it says:
USB Device Not Recognized
One of the USB devices attached to this computer has malfuntioned, and windows does not recognize it. For assistance in solving this problem, click this message.
When I do this it will try to install again the driver, but it says that it has already the latest driver. Nothing helps, uninstall, reinstall.
In the device manager it shows up under Universal Serial Bus controllers as: Unknow device.
What else of suggestions do you have?
Any help would be apreciated .....

I had issues too. Sometimes it would take forever to find the driver and sometimes in errors out.
After you installed Kies. Go to device manager and find your Samsung device. Usually will have the yellow caution triangle next to it. Right click change drivers. Do not let Windows search. I don't know the exact wording off hand but you want to get to the point where windows will let you select from a list of devices. Scroll down to Samsung and select. That's what worked for me.

Hi there again,
With a samsung galaxy s, is connecting easy does it with my windows7 64bit computer.
So in my opinion it really has to do with the driver.
I have also tried to connect to a XP computer (with my note), what also works fine.
Does anyone have an idea?
Sent from my Samsung Note

Uninstall kies, Just reinstall isolated driver.
If you connecting device with Extension cable, remove it, N connect direct to USB slot of main board(back side)
once it recognise, you can reinstall kies.

I'm having problems with drivers too but with the bluetooth driver. My laptop can't recognize my Note's bluetooth. I was able to install the driver before but the problem came up when I reinstalled windows. I have windows 7 x64 home premium installed. I can send and receive files though after pairing, but I need to manually click the send and receive options in my computer unlike before where I can send and receive files automatically.

Thanks Dr. Ketan,
Since I put my USB cable at the backside from the computer it recognized my telephone
I tried this also with an USB extension cable, but as you said already this isn't working!
I tried also again the front USB connector, but with that connector my telephone won't still be recognized, so I buyed a long cable and will use from now on the back side USB connector!
Thanks again for the good work,

No Kies..... AAAAArrgghh
I read so many threads to disable USB debugging, reboot (with/without SIM/microSD), uninstalled all USB and BT from PC (W7-X64) uninstall/reinstall Kies, and still KIES gives me this message not to be able to connect to my N7000.
There was a little KIES update which started to ask for the right phone, but the N7000 was not even listed!. Took me an entire day!
What a nightmare! Al other phones I have used worked like a charm to connect and sync. Here I sit with a 500 Euro Galaxy Note which even does not have my contacts!

To add to this (it being an appropriate thread),
I have Note and win7/64 and connections was fine with Keis installed but not running i did not have any problems until last week, when suddenly i could not read the micro USB card nor copy files from the phone.
After much mucking about, deleting drivers and reloading etc, i stumbled across a thread somewhere that suggested unmounting then mounting the SD card.. this worked.

Note and windows 7 32-bit
it works perfectly with XP Pro (synching and note being recognized).
While I try to do the same thing with windows 7 (32 bit) I does not recognize the note (I have installed the driver from : http://forum.xda-developers.com/showthread.php?t=1424997)
I have dismounted and mounted back the microsd card. Still not recognized. It only says that the driver has been installed, that the usb connection is working fine but the note is not listed in device manager nor I can synch anything.
Any ideas?
Mystic38 said:
To add to this (it being an appropriate thread),
I have Note and win7/64 and connections was fine with Keis installed but not running i did not have any problems until last week, when suddenly i could not read the micro USB card nor copy files from the phone.
After much mucking about, deleting drivers and reloading etc, i stumbled across a thread somewhere that suggested unmounting then mounting the SD card.. this worked.
Click to expand...
Click to collapse

reinstall kies then use a different usb port i too use win 7x64

I have uninstalled Kies wifi and disabled kies air. Which should I reinstall ?

I completely abandoned KIES as it is a nightmare.... for a few euro I bought something called Mobisynapse, which seems to do the job alright, although it is rather simple in its functionality.
(Unbelievable Samsung making nice products but this crappy s/w.)

sayborg said:
I have dismounted and mounted back the microsd card. Still not recognized. It only says that the driver has been installed, that the usb connection is working fine but the note is not listed in device manager nor I can synch anything.
Any ideas?
Click to expand...
Click to collapse
Along the way I've had to play about with several things quite often to get the connection working. See: this (the whole thread discusses this sort of connection issues); in this thread several of the problems I posted turned out to be related to USB ports and drivers.
Basically the variables are, as far as I can see:
- on the device side, USB debugging (see this, third bit) and neighbouring posts, and USB connection mode (see above)
- and on the pc side first the USB drivers, which you have already downloaded. I can make a connection using both Kies drivers (though I tend to agree with Eira007 here about their temperamentality) and Samsung USB drivers. BUT they won't co-exist. I have two separate (multiboot) instances of Windows 7 with Kies on one and Samsung drivers on the other! And then on the PC side finally the USB port you use. The drivers won't work with just any USB port, "kieskeurig" I would almost be tempted to say (sorry, Dutch joke). Most people (as in this thread) stress the importance of using a USB port at the back of the computer. However, in my rooting quest (see above) I actually discovered that connection via a USB port at the back of the computer didn't work but that connection via a USB hub did. So my experience is that with these four variables it's very much a case of "your mileage may vary" as they say, although the experts definitely advise no hub or USB extension cable and a rear side USB port. I would advise you to play around with the variables until it suddenly, magically works, keeping in mind that you can't install Kies and ordinary Samsung drivers together. Also, when removing one driver and installing the other you have to do a very thorough deinstall first (remove all related files and registry references) and a clean reinstall, otherwise Windows will just say, as mentioned in this thread that "the latest drivers are already installed". Incidentally, with Kies the Note appears in Windows explorer as one device, but with Samsung drivers the two SD cards appear as two separate drives. Finally I found that Kies takes a good while to respond and recognise the Note, and sometimes you have to go through the "Troubleshoot device connection" procedure several times before Kies suddenly wakes up and finds the device. (I'm not 100% certain about the label on the button as I'm not on my sync PC at the moment.)
Eira007 said:
I bought something called Mobisynapse
Click to expand...
Click to collapse
Thanks a million for pointing me to this. The reason I went to such lengths to keep Kies was because I couldn't find anything else that would sync my contacts, tasks and schedule with Outlook over USB. I'm going to check this out!

Guys,
I don't understand why we have to install Kies. With my laptop at home, Kies is not installed, it recognizes the phone (internal memory, and microsd) without any issues.
At the office I have Win 7 (32 bit), this is more recent than XP Pro however it does not work.
The Note should be detected without any softs (Kies etc)...

As I said, you don't have to install Kies, but your system does need drivers for the device, be they from Kies or wherever. Windows includes its own versions of lots of drivers, and it may be that your installation of Windows XP has drivers it at least "thinks" are the right ones for the device, whereas your installation of Windows 7 doesn't. And this wouldn't be the first time Windows 7 failed to do something that XP did OK.

I called the Samsung Benelux support yesterday. They told me to turn 2 features on in control panel/applications: Microsoft.NET Framework 3.5.1 (check 2 boxes). Then install Kies and then plug the usb cable. Tried it several times, does not work...

What do you need to do?
Kies = drivers + software to sync Note with PC (among other things);
Just drivers = if you (say) want to connect to your Note with PC Odin.
Kies indeed requires .NET framework if I remember correctly. But if you just need to "see" your Note's file system from the PC (like with PC Odin) then installing Kies is probably more trouble than it's worth.
Mobisynapse, suggested by Eira007 several posts ago, will also have to install drivers to work. I haven't got it yet as I'm still trying to get the website to accept my credit card.

Sorry to ask but what is PC Odin ? What does it do ? I just need my Win 7 laptop to see my Note. Currently it does not. I have tried with/without Kies and Mobisynapse. Still does not work. XP Pro sees my Note without any softs.

[Q] USB connection problem

Hello,
I'm more convinced that it's drivers problem, but my SIII Mini is giving no signals about connecting to PC while using USB cable, except it's just charging.
USB Debugging is obviously on.
Tried factory reset and installing few "versions" of Samsung usb drivers.
Don't have 2nd PC, nor 2nd cable, but cable was working with another phone (not samsung though).
I'm using Win7 x64.
Odin doesn't see anything either.
There's no SD card in my phone.
Rooting through app doesn't work.
Wifi connections (Kies/Ftp) does work, but i need that to be able to run/debug apps (i'd want to start to develop in Android) - if there was a chance to connect phone without using USB cable to Android Studio/Eclipse, then i could skip USB connection and use that instead. Emulators can't do all the jobs and are running slow on my PC + real phone means i can exactly know how app will work in the real usage.
Last times at reinstalling there was no such a thing, but when last time i've tried to connect my phone to pc and installed drivers few weeks ago, after installation finish, windows was showing in it's "drivers installation processes" that drivers installation failed, because "couldn't find the driver" (if i can remember, but that's what it said more or less).
Traditional question: have you an idea, what could be going wrong here? If need more informations, i can deliver.

android usb problem

Some reason my desktop wont work usb with android products (mine are note 3 and note 8 tablet). in device manager the samsung MTP Device comes up but with a excemation code 10. in usb controllers theres a samsung mobile usb composite device( is that supposed to be there?) if i uninstall that then reconnect my phone it shows up in explorer for like a minute then dissapears then back to where im at. if i plug it into another pc its works fine so i dont know whats wrong. btw im running windows 10

no help?

Is the computer a trusted device under development settings? Maybe try a different USB port or USB cables?

I've done so much to get this to work. I don't where to look for that in dev settings. I've done different cords/ports. It works on my laptop just fine. It's a driver issue and I don't feel like reinstalling windows lol