/* Info */
Portion of CyanogenMod 12 to Galaxy S4 LTE-A (GT-I9506).
This ROM is based on ks01lte CyanogenMod 11.
For more info, visit http://www.cyanogenmod.org
/* Disclaimer */
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
/* Supported device */
Galaxy S4 LTE-A (International) (GT-I9506, ks01lte)
/* Unsupported device */
Galaxy S4 LTE-A SK (SHV-E330S, ks01lteskt) (untested)
Galaxy S4 LTE-A KT (SHV-E330K, ks01ltektt) (untested)
Galaxy S4 WITHOUT Snapdragon 800 SoC
/* Known issues */
Testing for now.
/* What you need to know */
This is an official portion of CyanogenMod
'Opensource' does not mean 'no-respect'
Leave credits to original developers
This is only tested on
- GT-I9506 coming from stock Android 4.4.2 KK
Other variants, other OS may not be fully compatible
/* Thanks to */
Whole CyanogenMod Team.
@arter97
@boart for giving his device for testing.
Temasek for work on hltes kernel.
/* Contact */
Email : [email protected]
/* Downloads */
cm-12-20150124-UNOFFICIAL-ks01lte.zip
Google drive
MD5: b2d126f270a904798c7e2794eb0f0a4c
/* Installation */
1. Install ClockworkMod(or PhilZ) recovery
2. Put ROM and Gapps on you SD card
3. Enter recovery and do a factory reset
4. Flash ROM and Gapps in order
/* Sources */
Device tree: GitHub
Kernel: GitHub
/* Donations */
If you appritiate my work and want to donate. Here is the link to PayPal
XDA:DevDB Information
CyanogenMod 12.1 for Galaxy S4 LTE-A (GT-I9506), ROM for the Samsung Galaxy S 4
Contributors
solk2
Source Code: https://github.com/CyanogenMod/android_device_samsung_ks01lte
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Device must be rooted and CWM-based recovery installed
Based On: CyanogenMod
Version Information
Status: Stable
Created 2014-12-30
Last Updated 2015-12-22
Thx for this rom. Its awesome already. And the tipps for the nano gapps and cameranext are good to know, too!!!!!!
Update:
Swipe doesn't work so far. Rest seems stable until now.
Phone did reboot after scrolling in Settings.
update
Now it is better that all the posts are delete to start from the beginning , downloading now to test
Nice work! Is it the same like arter79's CM12, but include Kernel, Gapps and Fix?
Camera noise
boart said:
Thx for this rom. Its awesome already. And the tipps for the nano gapps and cameranext are good to know, too!!!!!!
Update:
Swipe doesn't work so far. Rest seems stable until now.
Click to expand...
Click to collapse
Which gapps are you using also the camera has lots of noise
Edit.....sorry
boart said:
Swipe doesn't work so far. Rest seems stable until now.
Click to expand...
Click to collapse
Probably AOSP issue. At least it doesn't work in CM11 either. No one really notices though as the culprit (libjni_latinime.so) usually gets overwritten quite quickly by a working version from gapps.
Developer.WL said:
Nice work! Is it the same like arter79's CM12, but include Kernel, Gapps and Fix?
Click to expand...
Click to collapse
Nope. It's different. CM-12 official builds will be based on this. And it doesn't include gapps.
lythro said:
Which gapps are you using also the camera has lots of noise
Click to expand...
Click to collapse
For now tkruzzes paranoid android gapps working best. Also use different from apps camera app. It's sucks.
http://download.paranoidandroid.co/gapps/
---------- Post added at 09:17 PM ---------- Previous post was at 09:15 PM ----------
DualJoe said:
Probably AOSP issue. At least it doesn't work in CM11 either. No one really notices though as the culprit (libjni_latinime.so) usually gets overwritten quite quickly by a working version from gapps.
Click to expand...
Click to collapse
It gets overwritten from what app from gapps? I am missing swipe a bit
_________________
Notification Sound sometimes doesn't stop in lock screen. I think its not a problem of THIS rom only, but do you know how you can disable the notification sound?
boart said:
It gets overwritten from what app from gapps? I am missing swipe a bit
Click to expand...
Click to collapse
Copy 'libjni_latinime.so' from gapps to '/system/lib/' and reboot.
At least that's what i do with CM11. I can't speak for CM12 but i guess its the same.
camera
solk2 said:
For now tkruzzes paranoid android gapps working best. Also use different from apps camera app. It's sucks.
Click to expand...
Click to collapse
have any good camera app?
Usually the CM11s camera is very good but i guess its still broken for I9506 (improper resolutions, no scene modes/postprocessing).
A reliable choice would be 'Google Camera' as it comes with predefined hardware profiles/proper resolutions.
Hi,
My data connection is not working w/ this rom, everything else seems to be fine considering as an alpha build...
I'm suspecting baseband, but I couldn't find standalone basedband for this phone on the net...
Is there any possibilty to update baseband w/o instlling any stock rom?
(I can remember, that I;ve found odin/recovery flashaable basebands for my older phone...)
thanks for your work!!
happy new year!!...
vagika said:
Hi,
My data connection is not working w/ this rom, everything else seems to be fine considering as an alpha build...
I'm suspecting baseband, but I couldn't find standalone basedband for this phone on the net...
Is there any possibilty to update baseband w/o instlling any stock rom?
(I can remember, that I;ve found odin/recovery flashaable basebands for my older phone...)
thanks for your work!!
happy new year!!...
Click to expand...
Click to collapse
Same. Tried flashing modem.bin from Stock KitKat, no success.
The same for me. all of those works great.
Is possible to get back to kit kat
lythro said:
have any good camera app?
Click to expand...
Click to collapse
Camera Kk gives med real good pics..
Having problems with the cell reseption, works good for a while, then it suddenly lose all signals, and wont connect to the mobile network.
And when I check for updates to cm, it only shows cm11 updates, do i have to download it from this page, or can i use cyanogenmod updates on the phone?
vagika said:
Hi,
My data connection is not working w/ this rom, everything else seems to be fine considering as an alpha build...
I'm suspecting baseband, but I couldn't find standalone basedband for this phone on the net...
Is there any possibilty to update baseband w/o instlling any stock rom?
(I can remember, that I;ve found odin/recovery flashaable basebands for my older phone...)
thanks for your work!!
happy new year!!...
Click to expand...
Click to collapse
I have this same problem, any suggestions to fix this ?
happy new year!
I installed the latest kitkat 1 month ago.. i guess i got the newest baseband with that. Afterwards i flashed this rom, and it works. Of course its not perfect yet, but all works most of the time.
I had a reboot when i connected bluetooth to my car. After that reboot, it worked with the car too. I don't know why it rebooted but... its ALPHA
vagika said:
Hi,
My data connection is not working w/ this rom, everything else seems to be fine considering as an alpha build...
I'm suspecting baseband, but I couldn't find standalone basedband for this phone on the net...
Is there any possibilty to update baseband w/o instlling any stock rom?
(I can remember, that I;ve found odin/recovery flashaable basebands for my older phone...)
thanks for your work!!
happy new year!!...
Click to expand...
Click to collapse
If you need, here you can find odin flashable modem for GT-I9506 (XXUCNK1), prepared and tested by me.
It include modem and NON-HLOS bin files. The file is a tar.md5, so is self-checking on odin the checksum.
Use odin v3.07 and select pda option... but if you already used odin, you know!
https://www.dropbox.com/s/k4xjip0lc4oa0z7/Modem_NK1.tar.md5?dl=0
I'm not responsible for any damage... just to be clear!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Inviato dal mio GT-I9506 utilizzando Tapatalk
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod 12.1 (Android 5.1) for Galaxy S4 LTE-A
/* Info */
Portion of CyanogenMod 12.1 to Galaxy S4 LTE-A.
These ROMs are based on Galaxy Note 3(hlte)'s ROMs.
For more info, visit http://www.cyanogenmod.org
/* Disclaimer */
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
/* Supported device */
Galaxy S4 LTE-A SK (SHV-E330S, ks01lteskt)
Galaxy S4 LTE-A KT (SHV-E330K, ks01ltektt)
Galaxy S4 LTE + International (GT-I9506, ks01lte)
/* Unsupported device */
Galaxy S4 LTE-A LG (SHV-E330L, ks01ltelgt)
Galaxy S4 WITHOUT Snapdragon 800 SoC
/* What you need to know */
Kernel is not included! Make sure to download and install kernel specifically made for CyanogenMod
This is an unofficial portion of CyanogenMod
'Opensource' does not mean 'no-respect'
Leave credits to original developers
This is an unofficial, unstable portion of staging CyanogenMod 12.1.
You may encounter errors and instabilities.
/* Thanks to */
@temasek71
@sktjdgns1189
@Sleepy
hsk from Matcl
@yank555-lu
@solk2
/* Contact */
Email : [email protected]
Twitter : @arter97_dev
/* Downloads */
Please buy me a cup of coffee if this was helpful for you
arter97 kernel for Android 5.1
ROM
/* Installation */
* Gapps must be made for Android 5.1 Lollipop ! *
1. Install ClockworkMod(or PhilZ) recovery
2. Put ROM, kernel and Gapps on you SD card
3. Enter recovery and do a factory reset
4. Flash ROM, kernel and Gapps in order
5. If you're an i9506 user, flash the fix file from here : http://www.arter97.com/browse/S4/etc/i9506_patch
XDA:DevDB Information
CyanogenMod 12.1 (Android 5.1) for Galaxy S4 LTE-A, ROM for the Samsung Galaxy S 4
Contributors
arter97
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod 12.1
Version Information
Status: Testing
Created 2015-03-25
Last Updated 2015-03-25
Reserved 1
Reserved 2
Reserved 3
Reserved 4
Wow !!!! 5.1 for our s4 lte-a.
Downloading. ...
Any bugs?
Thank you !
Great work.
Ill give it a go later this evening.
One (I'll make it two) cups of coffee coming your way
Downloading and working good!!
Install this GAPPS, are working for me
http://104.236.22.120/index.php?device=gapps/lollipop
Well done Arter!
Please provide feedback when you have booted up!
Ps. PA gapps retired... anyone know where to find gapps packages?
Quick question ..do the sensors like swipe with hand over the screen to make a screenshot or turn the phone up side down to mute incomming call work in this rom?
osdgap said:
Quick question ..do the sensors like swipe with hand over the screen to make a screenshot or turn the phone up side down to mute incomming call work in this rom?
Click to expand...
Click to collapse
No. CM generally has elliminated these features
I have few Fc .. going back to cm12
i do not get further than the setup wizard.. i always get to where i have to login or create a cm account, when clicking on next it gets fc and i cant go on
breakingstorm said:
i do not get further than the setup wizard.. i always get to where i have to login or create a cm account, when clicking on next it gets fc and i cant go on
Click to expand...
Click to collapse
Did you use gapps for 5.1?
davidl1983 said:
Did you use gapps for 5.1?
Click to expand...
Click to collapse
yes i did
breakingstorm said:
yes i did
Click to expand...
Click to collapse
I had the same problem. Fixed it by installing cm12.1 without gapps. After phone booted I rebooted to recovery and flashed gapps. That fixed the problem
Juhkimo said:
I had the same problem. Fixed it by installing cm12.1 without gapps. After phone booted I rebooted to recovery and flashed gapps. That fixed the problem
Click to expand...
Click to collapse
Samer for me.
Stock sms app force closes, but hangouts works fine.
No other app has FC after reboot, wipe and flash of gapps.
davidl1983 said:
Please provide feedback when you have booted up!
Ps. PA gapps retired... anyone know where to find gapps packages?
Click to expand...
Click to collapse
I saw your post and I decided to write about this rom.
This rom is snappy BUT IT HAS SOME PROBLEMS. eg The camera sometimes gives me fc. It takes too much time to boot. Lockscreen hangs after reboot.
Very good rom but it is still at early stages
did install without the gapps, but still same problem with setup wizard fc
breakingstorm said:
did install without the gapps, but still same problem with setup wizard fc
Click to expand...
Click to collapse
Do factory reset then format system and try again
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0.1 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
/* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
NOTEs
Should you ever face any issues, provide logs (use Google to find out how to gather those). I also need to know what build you're on - hence, you should mention the build number (or at least a date).
Hint: "It doesn't work" is not a bug report and posts like this will be ignored (and eventually removed). To keep the thread clean, try to use DevDB for real bug reports.
Important: Informations about the new adoptable storage feature.
DOWNLOAD
You can get the latest build from olivierk.eu, or:
Mirror 1: basketbuild.com
Mirror 2: androidfilehost.com
Screenshots
SOURCE
CyanogenMod
Kernel: CyanogenMod/android_kernel_sony_msm8930 (branch cm-13.0)
SUPPORT ME
If you like my work, feel free to buy me a beer (or two ).
You can also contribute to CM using gerrit.
XDA:DevDB Information
CyanogenMod 13.0 for Sony Xperia Z, ROM for the Sony Xperia Z
Contributors
Olivier, qsnc
Source Code: https://github.com/CyanogenMod/android_kernel_sony_apq8064
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Version Information
Status: Testing
Created 2016-01-07
Last Updated 2016-01-19
Not working/broken
NOT WORKING/BROKEN
- Camera
Changelog
CHANGELOG
20160109 (ALPHA1)
- Fixed issues with changing network types
20160107 (ALPHA0)
- Initial public release.
-ROM works very well, Open Camera nope
-in the first 10 minutes i got 2 SystemUI fc
-3G/LTE not working
Kuciak said:
OpenCamera, 3G/LTE (its very important for me) works?
Click to expand...
Click to collapse
Dude, instead of asking read #2 post
Where gapps? I use OpenGapps but flashing else error.
TrueFriend-cz said:
Where gapps? I use OpenGapps but flashing else error.
Click to expand...
Click to collapse
Try clean flash, opengapps pico!
emrecicek58 said:
Thankss very good bug is fix is the Better rom hey guys bugs? Camera.. ? All is stable working?
Click to expand...
Click to collapse
Read 2nd post... Only camera not working
Wysłane z mojego Xperia Z przy użyciu Tapatalka
great rom and stability. thank u olivier. it seems the doze mode and app standby features are not enabled for now.
TrueFriend-cz said:
3G/LTE not functionally on C6603
Click to expand...
Click to collapse
HSDPA signal in the status bar right here, and 6mbps download speed. Great work Olivier, ROM works great and battery too.
Sent using XDA One
Backing up and installing, i'll report my feelings asap
Edit:
Installed and tried. ROM is sooo smooth, seriously, better than LP. Xposed is working (so i am waiting for fully working rom ). And yes, there is a problem with network switcher. It stays at LTE, and can't be changed to any another mode (2G/3G) BUT on selected LTE is only showing EDGE signal when i have HSDPA signal where i live.
Is this rom working with multirom? I can't check because I'm not in home. BTW. Great job and thumbs up.
edi194 said:
Backing up and installing, i'll report my feelings asap
Edit:
Installed and tried. ROM is sooo smooth, seriously, better than LP.
Click to expand...
Click to collapse
The reason as to why your ROM is "super smooth and fast" is because it's just an ALPHA, and you had even installed a PICO gapps package - that's NOTHING for a device with 16GB storage. Basically, all CMs (I've been a fan of CyanogenMod since CM7) are meant to be fast, unique and smooth, but you can't really say that a CM ROM with only the most basic functions can be slow and bad. Especially on a powerful phone like ours.
And one more thing I'd like to add to those who are unexperienced - because you'll all lose DRM keys when you flash a non-stock ROM (which means awful camera quality at night and weird noise on photos), don't flash this ROM. It's not the time to do it, because you'll spend a lot of time backing up and restoring data. Better wait for a BETA version, in my opinion
Either way, big thanks to the OP for this, I'll definitely try and find a way to make a donation for this project. :good:
Zacny04 said:
Is this rom working with multirom? I can't check because I'm not in home. BTW. Great job and thumbs up.
Click to expand...
Click to collapse
no. It fails to flash in Multirom recovery.
Great work olivier btw! :good:
On experimental build 09/01/2016 (on 08 too) mobile data type switcher works well. Now waiting for camera
ALPHA1 is up, check the OP
Olivier said:
ALPHA1 is up, check the OP
Click to expand...
Click to collapse
Olivier, do you can recomended any GAPPS for this ROM? I using on LP HDPI (small) package on (for MM no exist builds), OpenGapps has having on LP problems as... After first logging lost pair Google services with Android (Sync account is lost) but after restart system is back,... And etc problems.
TrueFriend-cz said:
Olivier, do you can recomended any GAPPS for this ROM? I using on LP HDPI (small) package on (for MM no exist builds), OpenGapps has having on LP problems as... After first logging lost pair Google services with Android (Sync account is lost) but after restart system is back,... And etc problems.
Click to expand...
Click to collapse
Delta Gapps
Thread cleaned. Please stay on topic and search before posting.
When you post bugs or errors, its generally helpful to post with logs instead of
"HEELP HAPL!!! MY DEVICE BECOM POTATO"
HEELP HAPL!!! MY DEVICE BECOM POTATO... um... I mean...
I encountered strange behaviour while switching from my Bluetooth headset to the wired stock Sony headphones during music playback from Spotify. The sound disappeared, ui began to lag, especially volume adjustment, and eventually crashed, without anr message though.
Log too big to be attached so here is the link: https://drive.google.com/open?id=0B2Xx_go-qIiad0k5M3JFQjFRb2s
I am using project desire sound mod and adblock through hosts file, maybe this has an impact.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
THIS IS ONLY FOR G800H NOT THE EXYNOS G800F VARIANT!!!!
Downloads:
https://www.androidfilehost.com/?fid=11410963190603901395
Install instructions:
Install guide:
-Flash stock ROM lollipop Russia through odin (if not already)
-install latest stable TWRP
-wipe everything but microsd card
-install ROM
-optional, install opengapps NANO or Magisk/SuperSU
Reboot!
Changelog:
- fixed bt, camera
Requirements:
- latest lollipop firmware
- latest TWRP
- a rooted S5 Mini G800H
Known Bugs:
- No Second Sim (idk maybe, could be fixed)
- No fingerprint scanner
- No heart rate monitor
- No light sensor
Special thanks to:
João - the only one who was willing to test this in the last few days
Speedmatze for testing the first builds (wouldn't be possible without him)
Jackeagle for cm13.0 and his awesome trees...
Lineage OS
anyone else i forgot
XDA:DevDB Information
LineageOS kmini3g, ROM for the Samsung Galaxy S5 Mini
Contributors
Thargorsson
Source Code: [url]https://github.com/S3NEO[/URL]
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Latest Baseband
Based On: LineageOS
Version Information
Status: Testing
Created 2018-04-04
Last Updated 2019-01-15
#RESERVED
Fingerprint works?
markusaguilar said:
Fingerprint works?
Click to expand...
Click to collapse
Nope :/
Thargorsson said:
If you got official lineage 14.1 then this is the wrong thread as you got the exynos variant not the snapdragon one
Click to expand...
Click to collapse
:laugh:
Its really Android 7.1.2 for G800H?
FoxyRid said:
Its really Android 7.1.2 for G800H?
Click to expand...
Click to collapse
Yes, it is!
But it is still in a very early WIP stage and not usable for everyday use.
A couple of functions are still broken (most importantly file access to internal storage), but the OS with telefony on SIM1 and several other things are working already.
@Thargorsson is currently busy with important real-life stuff, but I hope he will be able to fix things after he is done (in about a month or so...). He has done an excellent job for the S3 Neo.
So let's keep our fingers crossed!
Hi, Just for precision, if you have TWRP 3.0.0 (https://forum.xda-developers.com/ga...pment/recovery-qualcomm-twrp-2-8-7-0-t3245256) don't wipe (cache/dalvik) after the installation but go wipe dalvik in the "wipe" menu. And you can mount /system (quote) and then "Remove /system/lib/hw/keystore.msm8226.so" in "Advanced" -> "File Manager" -> "/system" -> "lib" -> "hw" and then delete "keystore.msm8226.so".
(Sorry for my bad english ^-^).
finally uploaded all the repo to github, also updated the link in OP.
I hope ill get time soon to start fixing everything.
If any dev wants to join development for this rom take the sources from here:
https://github.com/Samsung-MSM8226
Gapps keep screen black after boot
@Thargorsson
current image (lineage_kmini3g-ota-e7c42a48b5.zip) does not work in combination with Gapps pico (open_gapps-arm-7.1-pico-20180414.zip).
Screen stays black after boot, but when shutting down the setup screen is shown for a short time.
SuperSU works (SuperSU-v2.78-201609011115.zip.md5)
When you prefer Magisk (Magisk-v16.0.zip) it works
Thank you for your great work so far. :good:
Hi! It is visible, that you work hard
nice rom, my congradulations
but unfortunately it has some bugs..
gapps can not be installed because of bootloop; sd card haven't detected, so some apps (camera, gallery, file manager, apk installation manager) are falt down, contacts are not available to move them from sim card to the telephone
so, good luck, I believe in you
When will the next update?
FoxyRid said:
When will the next update?
Click to expand...
Click to collapse
Sorry my crystal ball is broken.
Meanwhile check: [GUIDE][HOW TO] How to ask ETA in Development Section
***
FoxyRid said:
When will the next update?
Click to expand...
Click to collapse
You could ask me, but I must say that I'm totally busy till June 22 as I have my final school exams till then.
But if any other developer is willing to compile stuff for you I uploaded the source code for the current build so he could use that and improve stuff.
Good !
Stability of Rom is very good, but there are still many bugs. as in call, camera, physical buttons, SIM card 2
Congratulations for the initiative!
I decided to make a new build next week...
Camera shouldn't be a problem and physical keys also not (was it that big related to the firmware?).
The ril is the thing what makes me a bit of trouble, as I'm not a good RIL dev. Even on my (almost stable) oreo rom for the S3neo RIL is the only thing left.... but I'm sure we'll find a solution:good:
Hey Thargorsson. Good to see you back in action. I hope your final exams went well. Looking forward to the new build. I'd be happy to help if any testing is needed.
Speedmatze said:
Hey Thargorsson. Good to see you back in action. I hope your final exams went well. Looking forward to the new build. I'd be happy to help if any testing is needed.
Click to expand...
Click to collapse
Yes they did. Just PM me on telegram so I can start sending builds....
Thargorsson, Hi. How are you? I install your rom but phone getted bootloop
Please send your updated rom and I want test )
Post 1 says bug red border. Can somebody post a screen shot please?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[Lineage OS 13.0 | Android 6.0.1][Unofficial unstable][Build 28/11/18]
Lineage OS 13.0 For Samsung Galaxy Grand Prime VELTE(grandprimevelte SM-G531F)
Code:
*** Disclamer
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
A lot.
Installation instructions
Install instructions:
Wipe Everything Except Internal and Sd
Flash Rom
Flash Gapps: arm - 6.0 nano
And reboot.
Requirements:
- Flash firmware G531FXXU1APG2 before ! Get an European firmware with this PDA and flash it before flashing this ROM, or your RIL will not work at all.
Download
LineageOS 13.0 Grand Prime VELTE (old audio devices)
LineageOS 13.0 Grand Prime VELTE (new audio devices)
TWRP 3.1.1.0 Grand Prime VELTE
Open Gapps
dual-sim boot.img
(use at your own risks, I can't test it) If you flash this on single-sim variant, it should do nothing bad as I check for dual-sim phone but it's useless for you.
Changelog
Code:
[/SIZE][/CENTER]
[SIZE=4]
[CENTER]No changelog.
FAQ
No FAQ for now.
Known bugs
- Location/GPS not working.
- No Hardware video codecs, so no 720p and higher support.
Thanks To/Credits
Code:
[/SIZE][/CENTER]
[SIZE=4]
[CENTER]* https://github.com/osm0sis/pxa-mkbootimg/ for the PXA dtbtool, mkimage/unpackimage (Sorry guys, I've transformed mkimage & unpackimg to python scripts)
* Samsung for opensourcing their Kernel.
My unified repositories:
https://github.com/Nemirtingas/android_hardware_marvell_bootimage
https://github.com/Nemirtingas/android_hardware_marvell_wlan
https://github.com/Nemirtingas/android_kernel_samsung_grandprimevelte
https://github.com/Nemirtingas/android_vendor_samsung_grandprimevelte
https://github.com/Nemirtingas/android_device_samsung_mrvl-common
https://github.com/Nemirtingas/android_device_samsung_pxa1908-common
https://github.com/Nemirtingas/android_device_samsung_grandprimevelte
Don't forget to hit the thanks button, thanks.
XDA:DevDB Information
LineageOS 13.0 for Grand Prime VELTE, ROM for the Samsung Galaxy Grand Prime
Contributors
Nemirtingas
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: G531FXXU1APG2
Version Information
Status: Beta
Created 2018-12-01
Last Updated 2019-03-17
XDA:DevDB Information
LineageOS 13.0 for Grand Prime VELTE, ROM for the Samsung Galaxy Grand Prime
Contributors
Nemirtingas
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: G531FXXU1APG2
Version Information
Status: Beta
Created 2018-12-01
Last Updated 2019-06-16
Download link comming soon.
EDIT: Download link ready.
Thanks for the first Custom Rom for sm-g531f, i install this Custom Rom and reboot, work fine, but the offline change stuck. I'm still testing.
I use Google translate.
Labestiajaker said:
Thanks for the first Custom Rom for sm-g531f, i install this Custom Rom and reboot, work fine, but the offline change stuck. I'm still testing.
I use Google translate.
Click to expand...
Click to collapse
Yes, as I said its buggy, but I decided to release it as RIL works, but I'm still working on it.
Hi,
Thanks a lot for that work, I've been looking for a ROM for this grand prime variant for months!
I tested it and found a major bug: when trying to make a call, the network signal is instantly lost so the call is impossible. There is an error message when trying to find the signal again, and the only way to get it back is to reboot the phone.
Hope this helps.
FrenchFlaneur said:
Hi,
Thanks a lot for that work, I've been looking for a ROM for this grand prime variant for months!
I tested it and found a major bug: when trying to make a call, the network signal is instantly lost so the call is impossible. There is an error message when trying to find the signal again, and the only way to get it back is to reboot the phone.
Hope this helps.
Click to expand...
Click to collapse
Unfortunatly this doesn't help me at all. On my phone, RIL works fine, lte, call & sms. You should put a "logcat" & "logcat -b radio" of when it happens.
Unexpected.
After downloading the required Firmware G531FXXU1APG2 ( Poland) and getting ready to flash with Odin, the flash process failed and a message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" came upon the screen. Then after few minutes it won't turn on after pressing the buttons. What does it mean?
Help....
Ні! when trying to make a call, the network signal is instantly lost so the call is impossible. There is an error message when trying to find the signal again, and the only way to get it back is to reboot the phone.
Hope this helps. Link log file gist.github.com/Kolya145777777777/1eae891e012f2f7b66b41c76eb74ab2d
I updated the ROM, RIL bug should be fixed.
Offline charging fixed.
Also it should boot really faster.
Can you explain better how to use this with Odin? I'm trying for days find a way to use these files...
androidnewbie111 said:
Can you explain better how to use this with Odin? I'm trying for days find a way to use these files...
Click to expand...
Click to collapse
Flash official twrp via ODIN. Reboot to recovery and install this ROM.
Does it really work properly? Is it suitable for use? I use this rom. " https://www.sammobile.com/firmwares/galaxy-grand-prime/SM-G531F/TUR/download/G531FXXU1APK2/111396/ " Can I install directly? thanks.
Fatih666 said:
Does it really work properly? Is it suitable for use? I use this rom. " https://www.sammobile.com/firmwares/galaxy-grand-prime/SM-G531F/TUR/download/G531FXXU1APK2/111396/ " Can I install directly? thanks.
Click to expand...
Click to collapse
No you can't, you need a firmware with version G531FXXU1APG2. I uploaded my stock firmware here: G531FXXU1APG2_G531FOXX1APG2_G531FXXU1APG2_HOME.tar.md5
Its usable, RIL, WiFi, Bluetooth, OTG, adb, mtp, offline charging work. Camera works if you start the CameraApp a lot of times. It should not randomly crash but you can have graphic bugs when watching video cause I'm working on libstagefright (video/audio codecs).
Also I'm releasing new versions often fixing some bugs here and there.
Its up to you if you want to try it or not .
Nemirtingas said:
I updated the ROM, RIL bug should be fixed.
Offline charging fixed.
Also it should boot really faster.
Click to expand...
Click to collapse
Thank a lot man, great work. Someone testing in SM-531M ?
I tested on my sm-g531m and the call is not working...
This ROM is for SM-G531F
Nemirtingas said:
This ROM is for SM-G531F
Click to expand...
Click to collapse
GPS not working SM-G531F
Kolya45777777777 said:
GPS not working SM-G531F
Click to expand...
Click to collapse
It works on my phone.
Can you send the result of:
getprop | grep build
and
md5sum /dev/block/platform/soc.2/by-name/MODEM
?
Nemirtingas said:
It works on my phone.
Can you send the result of:
getprop | grep build
and
md5sum /dev/block/platform/soc.2/by-name/MODEM
?
Click to expand...
Click to collapse
Can you explain more about how to fix a GPS problem?
Nemirtingas said:
This ROM is for SM-G531F
Click to expand...
Click to collapse
Bro, SM-G531M have they same proccesor and drivers. It's possible port?
---------- Post added at 06:25 PM ---------- Previous post was at 06:02 PM ----------
TBackspace said:
I tested on my sm-g531m and the call is not working...
Click to expand...
Click to collapse
Bro, you flash first a European firmware?
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Hi,
here you can find my preview build version of LineageOS 17.1 for our Samsung Galaxy Note 10.1 devices.
At first I want to thank @forkbomb444, @rINanDO, @ChronoMonochrome for all your work which helped me a lot to bring this up.
This is a preview build, so don't install it if you want a stable rom and don't report my already listet bugs!
Because Android 11 is very similar, I will proceed here:
LineageOS 18.1
I'm working nearly every day on our N80xx devices, but my focus is still mainly on LineageOS 16.0, which runs already pretty good.
Here you can see how far everything is working for now.
Spoiler: Whats working
N8000, N8010, N8013, N8020:
Boots
Audio
Bluetooth
Graphics
Cameras
Sensors
Wifi
USB
Video playback (HW/SW)
OTA Updates
GPS
Tethering via USB, WIFI and Bluetooth
consumerir transmitter
Stylus with gestures and hovering icon
Spoiler: Whats not working
Graphic / Video bugs
Deep sleep
Maybe more
Links:
Spoiler: N8010, N8013
TWRP
N8010 / N8013 Rom
If you are going to use Gapps,
I recommend to use the pico package!
https://opengapps.org/
For the others, you can use microG if you want, I've enabled signature spoofing.
Do you like my work?
Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
I'm doing this in my free time and it also costs a lot of money to buy hardware.
donate
Spoiler: How to improve GPS
You could use a gps.conf from https://app.box.com/s/w57s1v1n3hie7l5lk28i for your location and replace /system/etc/gps.conf.
Or you try GPS Server Optimizer app for a faster 3D fix.
For both methods you need root rights.
Spoiler: How to install it?
Instructions
XDA:DevDB Information
[ROM][10.x][N8000/N801x/N8020][ALPHA] LineageOS 17.1, ROM for the Samsung Galaxy Note 10.1
Contributors
html6405
Source Code: https://github.com/html6405
ROM OS Version: 10.x Q
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP 3.4.0
Based On: LineageOS
Version Information
Status: Alpha
Created 2020-12-17
Last Updated 2020-12-17
*reserved
I see that LineageOS 17.1 folder is updated only for the N8010 version. I have a N8000 which is the 3G version. Could I use it anyway?
kaplanfa said:
I see that LineageOS 17.1 folder is updated only for the N8010 version. I have a N8000 which is the 3G version. Could I use it anyway?
Click to expand...
Click to collapse
Because I only build it for N8010, yes you can test this version also on a N8000,
for sure you wont have RIL functioning.
To flash it, you have to change TWRP to N8010 version or modify the install script.
html6405 said:
Because I only build it for N8010, yes you can test this version also on a N8000,
for sure you wont have RIL functioning.
To flash it, you have to change TWRP to N8010 version or modify the install script.
Click to expand...
Click to collapse
In the end i installed 16.0 . It is a perfect rom and gave a life to my tablet after years. I was trying to use it as a car display unit in my car and thanks to you this will work perfectly. If I see a bug I will right it here but so far it is very smooth. Can't say that this tablet is more than 7 years old. Thank you very much for your time and effort.
I install the Gapps via TWRP. But when the tablet starts and tries to setup the Google, it crushes before it finishes . I can come until to the screen where it asks to sync the tablet with my other devices. I say skip, it loads a bit and crashes . Any idea ?
kaplanfa said:
I install the Gapps via TWRP. But when the tablet starts and tries to setup the Google, it crushes before it finishes . I can come until to the screen where it asks to sync the tablet with my other devices. I say skip, it loads a bit and crashes . Any idea ?
Click to expand...
Click to collapse
Which Gapps did you install?
And did you installed them directly after the rom without any reboot?
I made a complete fresh installation yesterday and it worked without any problems.
html6405 said:
Which Gapps did you install?
And did you installed them directly after the rom without any reboot?
I made a complete fresh installation yesterday and it worked without any problems.
Click to expand...
Click to collapse
You are right. I had installed gapps after the first reboot. I re-installed the rom and installed the gapps before the reboot, and now everything is working just fine. Thank you again.
Good Morning!
Once again I come to thank you for the excellent work on our device. I'm taking advantage of your post to find out if you know anything about Lineage 18 for our equipment ?, as a compilation dated 12/13/2020 appeared in Lineage Os Statistics.
Alexfs said:
Good Morning!
Once again I come to thank you for the excellent work on our device. I'm taking advantage of your post to find out if you know anything about Lineage 18 for our equipment ?, as a compilation dated 12/13/2020 appeared in Lineage Os Statistics.
Click to expand...
Click to collapse
No, where do you see this?
LineageOS Statistics
stats.lineageos.org
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Alexfs said:
LineageOS Statistics
stats.lineageos.org
View attachment 5161179
Click to expand...
Click to collapse
Hmm this is not mine, looks like there's someone else working on it.
html6405 said:
Hmm this is not mine, looks like there's someone else working on it.
Click to expand...
Click to collapse
The way is to wait and see if someone will make some new rom available. Anyway, your work is to be congratulated. I am currently in Lineage 16 I will stay with her for a while until Lineage 17 is in a more stable version.
Alexfs said:
LineageOS Statistics
stats.lineageos.org
View attachment 5161179
Click to expand...
Click to collapse
This is my build, it's running with the android mainline kernel, so 5.10. There is still some issues and missing drivers, too early for an alpha release, but I'm getting there.
Don Carnage said:
This is my build, it's running with the android mainline kernel, so 5.10. There is still some issues and missing drivers, too early for an alpha release, but I'm getting there.
Click to expand...
Click to collapse
Respect, this will open us many new doors .
Good, Very good to know that there are more people working to prolong the life of our tablet. Congratulations guys.
Don Carnage said:
This is my build, it's running with the android mainline kernel, so 5.10. There is still some issues and missing drivers, too early for an alpha release, but I'm getting there.
Click to expand...
Click to collapse
You're telling me that you've got Kernel 5.10 running on these tablets?! That's amazing! Is the source on Github or anywhere? I'd like to take a peek.
can I use this for korean Variant? SHW-M480W?
dweeb18 said:
can I use this for korean Variant? SHW-M480W?
Click to expand...
Click to collapse
In theory this should work as the devices are basically the same from a hardware point of view and the original sources and defconfig have only little differences. It would definitely be interesting to know whether it works.
Unfortunately I havent seen any hardware reports on this device, could you download the following app and upload your report?
Device Info HW - Apps on Google Play
Hardware and software information app for Android devices.
play.google.com
Because Android 11 is very similar and I received already a more stable state, I will proceed here:
LineageOS 18.1