Database Develop

How do I root my phone ? (I've read your guides but they are CONFUSING!!)

Here is my experience with all this and why I need help ..
(Yes, I am new to all this, maybe that's why I get confused but alright..)
Okay, I want to root my phone with the design of DocRambone. Right, I follow your guide here:
http://forum.xda-developers.com/showthread.php?p=7329960#post7329960
And go to HOWTO#1 which says I need to flash my firmware. And so I start.
I first download Odin, get the 512.pit file and then try to find the desired firmware package(which according to the Doc guide is I9000XWJM8). Okay, I search the link and get to this: (I pick original firmwares -> Europe)
https://www.wuala.com/Samsung Galax...n/Original Firmwares/Europe/?key=AfzUZSU4SpKU
Which leads to my first confusion. I can't find anything named "I9000XWJM8". The closest I find is the one called "GT-I9000_I9000XWJM8_I9000XXJM4_CODE-MODEM.7z". Can I use this one or where is the "I9000XWJM8" ? :S
Right, I then assume it's the right one and continue only to find out that I don't know how to start my phone in "download mode". Or maybe I just can't because I got one of the phones without the 3 button combination. I'm not sure which one it is, and yes I did try all the combinations you state here:
http://forum.xda-developers.com/showthread.php?t=746814&page=2
None works. But how does the screen look like when you are in recorvery mode? Maybe you should add this to the guide, so people know if they can or cannot start in recorvery mode.
Anyway, I assume I have one of the phones without the combination and so I continue to the guide "Release: 3-button combo fix for any firmware version":
http://forum.xda-developers.com/showthread.php?t=785201
I follow the guide and get to step 6 which says "Start a new command prompt and type "adb reboot recovery"". Right, what's this now?
I go back to the big tutorial:
http://forum.xda-developers.com/showthread.php?p=7329960#post7329960
And finds the ADB tutorial to find out that I need Android Software Development Kit .. AND a rooted phone. Right, so I wanted to root my phone in the first place and now I need to root the phone in order to get the 3 button combination so I can root the phone. "Wait what?" was my 1st thought. But then I remembered that I found this guide earlier "[REF] Howto (un)root your SGS I9000 the easy way (keep all your data) (Eclair 2.1)":
http://forum.xda-developers.com/showthread.php?t=728754
Why did I got here? Because it said "the easy way". I thought that maybe it doesn't need the 3 buttom combination and so I found out it doesn't!! YAY finally a breakthrough, I thought. And so I started with this tutorial.
I was then met with this
"ROOT includes:
- Superuser 2.3.6.1
- Busybox 1.16.0 (for use with Titanium Backup)"
which brings me to another question: Does this mean that you get these apps when you use this root method? or do I need to install the apps first?
I thought it was the first one, since it says "includes". And so I start with the "Automated Method!". I dowload the .bat file and start. Follow what it says and reaches to the part where I plug in my phone. Here I get the error message: "Driver installation unsuccessfull" (Or something like it. I Don't recall since when I plug the phone in now I don't get the error. I don't even get a "ready to use removable disk" now. It doesn't even recognize the phone now when it's plugged in). Now I have tryed to connect it to the pc before (although WITHOUT the USB-debugging checked) and it worked fine. And this is as far as I can get. I am now officially stuck!
I have read comments and all but it doesn't help.
I'm realy tired from trolling these forums after being led through like 4-6 guides + the ones I havn't mentioned here (havn't counted, but something like that)..
So can anyone please, for the love of god, tell me which guide I should start with, list the guides so I know which one to go to next and answer the questions above.. My head hurts now :S ..
But in general, please write the guides more "noob friendly" or whatever .. I think alot of them are written by admins for admins(or atleast people who know their way around these phones). Atleast that's the impression I get.
I know it was a long read but I hope you'll help anyway
Thank you in advance!
/JohnTheOne

Sorry if I sound mad or offencive btw.. it's not my itention. I'm just mad and annoyed at myself because I can't make it work
Sent from my GT-I9000 using XDA App

hello there, I can appreciate if you're new to smartphones it can seem a lot to take in.
If you want an easy/simple way to root then there are 2 or 3 methods available on this fantastic forum but try this one:
http://forum.xda-developers.com/showthread.php?t=742403

just go to youtube and search for rooting videos and watch someone do it first, then you do it. very easy once you see how it is done. youtube or theunlockr.com also has great videos

Yea but my problem is now that I can't get access to it when it's in USB debugging mode.
As I posted earlier, the first time I put my phone in USB debugging mode and connected it to my computer it said "Drivers where not successfully installed" (or something like it).. And now, when I connect my phone to my computer in USB debugging mode, it won't even show as an USB. It doesn't pop up and say "USB connected" and I can't find it under My Computer.
Someone who can help me with this?

And when I plug it in, in USB debugging mode, should I press the USB connected button on my phone, like I usually do when I connect the phone to my computer without it being in USB debugging mode?

Okay, I found the device now on my computer, but I can't find any drivers for the phone to be connected in USB-debugging mode. Anyone knows where I can find drivers for this?

JohnTheOne said:
Okay, I found the device now on my computer, but I can't find any drivers for the phone to be connected in USB-debugging mode. Anyone knows where I can find drivers for this?
Click to expand...
Click to collapse
when used as USB Debugging mode, you need no driver if you plan to use it as a mass storage drive
you just pull down the tab and select mount the drive
then you can copy your Update.zip to the phone Internal SD
after it is done select Unmount the mass storage drive from the pull down tab in the phone
and now you can boot into the Recovery Mode, select update.zip
and you are rooted.
reboot back to normal, and enjoy the freedom to install any App you want to play with

The easiest way I found is to go on to Android market, install One Click Lag Fix. Then open the app and select root 2.1. Restart into recovery and select apply update.zip. Your phone reboots and its rooted. Simples!

simplest way to root is
1)go to market search for RyanZA's OCLF 2.0.
or here is link http://www.appbrain.com/app/com.rc.QuickFixLagFix
2)open the app
3) click root.
4)then boot into recovery
5)use volume button to select update.zip and click home button
6)your phone is rooted.

Hi everyone... Can anyone here let me know if these "lagfix" rooting methods work and are SAFE for a LOCKED (I have not unlocked the sim) Bell Galaxy S with stock JH2 rom? I am also a bit of a noob and would like to see what this phone can really do.
Also... Do I have to unroot it if I want to upgrade to froyo when it is released?
Please advise...
Thx.
yiannisthegreek
PS... Once this is rooted, HOW do you unroot with these "lagfix" methods if I ever need to?

i would advice againts installing the LAG FIXes as they can kill your Internal SD
there are over a dozen forum topics with people unable to repair the damage, and end up having to ship the phone back to samsung to have it repaired.

Allgamer...
Thank You for the heads up on this but now I am still confused on how to do it. I have to move the update.zip file to my internal sd card but I too have some issues that I cant figure out.
I learded how to do it on youtube watching someone called tech0stickyasglue and it seems very simple but firstly I am not sure exactly where I have to place the file and if I have to unzip it and then place the 2 folders inside it into the sd card, etc... I also have an issue with the whole "mount" and "unmount" thing.
I can mount the card while in usb debugging but when I go back to the dropdown menu it does not give me an option to "unmount" it only gives me an option to quit usb debugging and when I pick this option I get a warning message saying that I should "make sure I have unmounted form the host" or something to that effect.
Can you give any advice or step by step instructions to me on what and where I need to place these files to make this work?
I would greatly appreciate it...

Yea but the thing is that I can't go into recorvery mode.. The 3 button combination doesn't work (Talking to the people from page 1)

AllGamer said:
when used as USB Debugging mode, you need no driver if you plan to use it as a mass storage drive
you just pull down the tab and select mount the drive
then you can copy your Update.zip to the phone Internal SD
after it is done select Unmount the mass storage drive from the pull down tab in the phone
and now you can boot into the Recovery Mode, select update.zip
and you are rooted.
reboot back to normal, and enjoy the freedom to install any App you want to play with
Click to expand...
Click to collapse
When I put down the tap and select mount the drive(when in USB debugging mode that is) I can't acces the phones folders. I can't even see the extra icons you usually get, under My Computer, when you connect an USB to the computer. I can only find the SAMSUNG_Android under Control Panel -> Hardware and Sound ->Devices and Printers where it lies under the "Unspecified" section and not under the "Devices" section. And when I right click on it, press proporties and go to the Hardware tap, I can see under "Device status:" it says "The drivers for this device are not installed. (Code 28)" ..
So can anyone tell me what's wrong? (I havn't installed Kies btw, dunno if that has got anything to do with it)

JohnTheOne said:
When I put down the tap and select mount the drive(when in USB debugging mode that is) I can't acces the phones folders. I can't even see the extra icons you usually get, under My Computer, when you connect an USB to the computer. I can only find the SAMSUNG_Android under Control Panel -> Hardware and Sound ->Devices and Printers where it lies under the "Unspecified" section and not under the "Devices" section. And when I right click on it, press proporties and go to the Hardware tap, I can see under "Device status:" it says "The drivers for this device are not installed. (Code 28)" ..
So can anyone tell me what's wrong? (I havn't installed Kies btw, dunno if that has got anything to do with it)
Click to expand...
Click to collapse
Ahh... the joy of Android & Kies....
you don't really need to install Kies, I only installed Kies to check for official ROMs, but i was using the phone on the PC even without Kies installed
You can install the Android SDK drivers, inside the Android package that you download from google, there is a sub folder with both 32bit and 64bit drivers, unplug your phone and install them, then plug back the phone, it should be detected now.
in my Work PC, i never installed any driver, and i select mount, and it gets detected as a USB key by Win XP

AllGamer said:
Ahh... the joy of Android & Kies....
you don't really need to install Kies, I only installed Kies to check for official ROMs, but i was using the phone on the PC even without Kies installed
You can install the Android SDK drivers, inside the Android package that you download from google, there is a sub folder with both 32bit and 64bit drivers, unplug your phone and install them, then plug back the phone, it should be detected now.
in my Work PC, i never installed any driver, and i select mount, and it gets detected as a USB key by Win XP
Click to expand...
Click to collapse
Alright, thanks alot But where can I find this Android package then? I'm not sure what you are talking about exactly

Why wont anyone explain WHAT file(s) you put WHERE exactly for this update.zip root method? Is is some sort of "spy secret" or something?
Seriously... I CAN get to see my phone folders on my computer so I am good there but what I dont know is if I am supposed to move the entire .zip file to the root of my sd card or if I need to extract the .zip file to the root of my sd card.
At any rate... I have tried BOTH methods and I always get the same error message when I reboot in 3 button mode... Something to the effect of E: cannot open / install update.zip... Invalid or not found... (I am guessing on this as I am at work but you get the idea)...
Please... ANY help and "step by step" instruction would be GREATLY appreciated!!!

Hi,
One Click Lag Fix (OCLG) downloadable from Android Market will give u an option to root ur phone. And also it gives u an option to fix the lag in galaxy s. I have more than 80 applicatons and widgets installed in my phone. I insist that OCLF is the most useful, powerful and demanded application ever. It is so easy to use and follow. It even offers an option to unroot. So don't be afraid to download and install.
For ur reference, the bench mark speed has been increased from 800 to 2150. Comparable to nexus 1 with 2.2 was 1200. Hope this helps.
Sent from my G-I9000M Ver. UGJH2 using XDA App on Bell Mobility Network

JohnTheOne said:
Alright, thanks alot But where can I find this Android package then? I'm not sure what you are talking about exactly
Click to expand...
Click to collapse
you download it from google
just google up Android SDK download

How do I transfer apps from my pc to my rooted nook touch?

Hello everybody! I have a lot of android apps on my pc and I want to transfer them to my nook, but I don't know if it is possible. If it is, which folder do I drop them off in? I tried to find where the other apps are installed in my nook that I directly download from the android market, but I can't find their location. Please help me out, I really need some of the apps I have and I can't even find them or can't download them directly. Thank you for your time!

psbear532 said:
Hello everybody! I have a lot of android apps on my pc and I want to transfer them to my nook, but I don't know if it is possible. If it is, which folder do I drop them off in? I tried to find where the other apps are installed in my nook that I directly download from the android market, but I can't find their location. Please help me out, I really need some of the apps I have and I can't even find them or can't download them directly. Thank you for your time!
Click to expand...
Click to collapse
Use adb
Code:
adb install myapp.apk

ros87 said:
Use adb
Code:
adb install myapp.apk
Click to expand...
Click to collapse
Thanks for taking your time to help me I really appreciate it. I've run into a problem though. when I try to set up adb it wont find my device in the cmd prompt. I am following these instructions to set up adb: search in youtube "ANDROID SDK Tools (How-To Install)" first video. I get stuck at the part at 6:23 it just says "list of devices attached" and doesn't list anything. I don't know what am doing wrong .

psbear532,
You can use a file explorer program (astro, es explorer, etc), and choose the apk on sd and install it. Just remember to use nookcolortools and de-select and re-select the non-market app box.
I guess it would be easier - I haven't had luck with adb so far...

psbear532 said:
Thanks for taking your time to help me I really appreciate it. I've run into a problem though. when I try to set up adb it wont find my device in the cmd prompt. I am following these instructions to set up adb: search in youtube "ANDROID SDK Tools (How-To Install)" first video. I get stuck at the part at 6:23 it just says "list of devices attached" and doesn't list anything. I don't know what am doing wrong .
Click to expand...
Click to collapse
Assuming you've successfully rooted your NST:
1: Enable wifi on your NST and make a note of the IP address assigned to it.
2: Tell adb to connect to that IP
Code:
adb connect 10.0.0.2
That's it, if adb was able to connect you can now adb push or adb install all you want
---------- Post added at 01:41 AM ---------- Previous post was at 01:39 AM ----------
apeine said:
psbear532,
I guess it would be easier - I haven't had luck with adb so far...
Click to expand...
Click to collapse
Why?, apart from having to download and install the Android SDK, using adb should be straightforward unless you're trying to get it to connect to the NST trough usb.

Ros87,
Maybe that was my mistake. I've always tried using USB :S

apeine said:
Ros87,
Maybe that was my mistake. I've always tried using USB :S
Click to expand...
Click to collapse
Getting adb to work over USB on the NST is a pain in the a**
Some people have reported getting it to work with the Google drivers, but none of them worked for me in W7. Also I'm unable to try it in Ubuntu as I'm running that trough VMware Player and I cannot redirect the USB port properly.

Thank you both so much! Ros87 I got it to work over wifi which I think is even better since now I don't even have to deal with the wire. apeine I didn't try your method since adb worked, but thanks for your time anyway.

ros87 said:
Getting adb to work over USB on the NST is a pain in the a**
Some people have reported getting it to work with the Google drivers, but none of them worked for me in W7. Also I'm unable to try it in Ubuntu as I'm running that trough VMware Player and I cannot redirect the USB port properly.
Click to expand...
Click to collapse
So why don't you install linux on a separate partition?

How does one do this without an SD card? I will be getting one soon, but for now, can I just create a temporary folder on the home directory and install it from there? Does it automatically install to the apps directory?
Thanks!
EDIT: I just figured out how much you can browse with the computer. So...

The simplest method is to just copy the apps to an SD card, insert the card,browse to the .apk location,tap on the .apk file, you will be prompted with an screen asking if you want to proceed to install or just use the adb over wifi method as explained above

I use and app names Airdroid. It allows you to install apps remotely from your computer via wifi.

I have an "apk" folder in my UbuntuOne account, Dropbox should work too.
then i have the app for the service installed.
it works fine for me

How to root your Samsung Galaxy Gear!

How to Root the Samsung Galaxy Gear:
Firstly:
I AM IN NO WAY, SHAPE OR FORM, RESPONSIBLE FOR THE OUTCOME OF YOU FOLLOWING THESE INSTRUCTIONS! IT WORKED FOR ME, BUT THAT DOES NOT MEAN IT WILL ABSOLUTELY, POSITIVELY, WITHOUT A DOUBT, WORK FOR YOU!
Root Guide:
Preparation:
1. Install Samsung's official ADB Drivers from here.
2. Get Cydia Impactor from here.
3. Go to your Gear's settings and enable ADB​
To Root:
1. Plug in the device and let it install all the drivers it needs.
2.Unzip the Cydia Impactor folder you just downloaded
3. Open Impactor from the folder you just unzipped
4. The default "# drop SuperSU su to /system/xbin/su" is what you need
5. Click start
6. Once the process completes, the device will still look normal, but is fully rooted!​
I will have to leave it to you guys to install a utility like SuperSU or Superuser until there is a functioning recovery for the Gear.
Though this isn't necessary, however, and in some most cases doesn't work! SuperSU or Superuser just manage what apps access the SU command, so if you trust the app, it should be ok!
Enjoy your newly rooted device!​
How to restore back to stock:
Preparation:
1. Get Odin 3.07 from here.
2. Find the proper .md5 file from here.
(If you are in the US, just select the Great Britain file.)
3. Install Samsung ADB drivers from here.​
To Restore:
1. Plug in the Gear
2.From being powered on, (Bootable or not) press and hold the button of the right until the Gear shows "Samsung Galaxy Gear Rebooting" and rapidly press the button until you get to the "Select REBOOT MODE" screen.
3. Highlight "Download" in the list by pressing the button to scroll.
4. Press and hold the button for 3 seconds (and let go! The screen won't change immediately) and let it boot into download mode.
5. Unzip the .zip file you just downloaded that contains the ROM itself.
6. Select the PDA button and open the .MD5 file in the folder you just unzipped.
7. DO NOT ALTER ANYTHING ELSE!!!
8. Click the start button, and you'll be back to stock within a couple of minutes! (Most likely with any data on /data kept and all sideloaded apps remaining.)​
Any questions? Ask below! Want to help me make a ROM or Recovery? PM me!​

I tried this on OSX and now have a device that won't connect via USB anymore, even after factory reset! Proceed with caution.
EDIT : The device would still connect to adb in 64-bit Ubuntu, and and after re-running the application I have a rooted device. Busybox has been installed and all seems to be working well now.

Oops!
BUS DR1V3R said:
I tried this on OSX and now have a device that won't connect via USB anymore, even after factory reset! Proceed with caution.
EDIT : The device would still connect to adb in 64-bit Ubuntu, and and after re-running the application I have a rooted device. Busybox has been installed and all seems to be working well now.
Click to expand...
Click to collapse
I had issues with impactor crashing on my Mac, so i ran it on Windows instead as well!

photonicgeek said:
I had issues with impactor crashing on my Mac, so i ran it on Windows instead as well!
Click to expand...
Click to collapse
I'm actually not sure what's going on with this thing now. Busybox said the device was rooted, and it installed, but I can't seem to run any commands that require root.
Are you running Superuser or SuperSU, and what version?

Does this mean i will be able to use this with my HTC one? Im a newbie when it comes to this but id love to buy this watch to use with my stock 4.2 HTC One. Thanks.
Sent from ...............

Great news! :victory:
About 'UNROOT'? ... any idea? Or we just flash official rom back to GEAR?

big_pongo said:
Great news! :victory:
About 'UNROOT'? ... any idea? Or we just flash official rom back to GEAR?
Click to expand...
Click to collapse
Haven't rooted mine yet. But seems like the unroot feature in supersu should work
---------- Post added at 06:22 PM ---------- Previous post was at 06:18 PM ----------
This is great news! Thank you sir for creating an account. Just to share ur find. Who knows this might even make it to XDA wall on home page! But I do have to ask, how did you know Cydia Impactor would do the trick?

To answer some questions...
Ok, Firstly, mounting the gear should never have been possible... I know I have tried!
The entire process of rooting a device is simply getting the file "su" into /system/bin/ but the trick is getting it in there without root privileges! The truth is SuperSU or Superuser aren't ACTUALLY needed, they actually just regulate how apps access the "su" command.
To use the gear with any watch would require a new ROM which I know NOTHING about, but I am looking into modding the first one. (I recommend setting the screen DPI to 100)
And to answer @trevor7428 , I am an iPhone and Android user, and I do a lot of research into how exploits work. Saurik who does a lot of iPhone security research, mentioned the "Master Key" ("Hack 99% of Android devices") exploit, how to exploit it (Where impactor came from!), and also how to fix it. Thus, I thought that the worst that would happen is that it would fail!

photonicgeek said:
Ok, Firstly, mounting the gear should never have been possible... I know I have tried!
The entire process of rooting a device is simply getting the file "su" into /system/bin/ but the trick is getting it in there without root privileges! The truth is SuperSU or Superuser aren't ACTUALLY needed, they actually just regulate how apps access the "su" command.
To use the gear with any watch would require a new ROM which I know NOTHING about, but I am looking into modding the first one. (I recommend setting the screen DPI to 100)
And to answer @trevor7428 , I am an iPhone and Android user, and I do a lot of research into how exploits work. Saurik who does a lot of iPhone security research, mentioned the "Master Key" ("Hack 99% of Android devices") exploit, how to exploit it (Where impactor came from!), and also how to fix it. Thus, I thought that the worst that would happen is that it would fail!
Click to expand...
Click to collapse
After typing that about mounting the gear I immediately questioned whether that ever worked. :silly:
That being said, I have the su file in system/bin and system/xbin/, but anytime I try to run something that requires root it says "must be suid to work properly". After trying to find a fix for that for a few hours without luck I've run out of ideas.
Better yet, why not make a backup of the rooted rom that can be flashed via Odin now that download mode is more accessible?

Someone please sticky this so its easy to find
Sent from my SM-N900V using xda app-developers app

Minecraft on the Galaxy Gear!
BUS DR1V3R said:
After typing that about mounting the gear I immediately questioned whether that ever worked. :silly:
That being said, I have the su file in system/bin and system/xbin/, but anytime I try to run something that requires root it says "must be suid to work properly". After trying to find a fix for that for a few hours without luck I've run out of ideas.
Better yet, why not make a backup of the rooted rom that can be flashed via Odin now that download mode is more accessible?
Click to expand...
Click to collapse
I just added restore instructions to the OP!
Oh, and I found that Minecraft actually runs rather well, if not extremely cramped!
Look for my video on Youtube! Username: Photonic Boom

photonicgeek said:
I just added restore instructions to the OP!
Oh, and I found that Minecraft actually runs rather well, if not extremely cramped!
Look for my video on Youtube! Username: Photonic Boom
Click to expand...
Click to collapse
This looks to have worked fine.
However now I have a couple of "Payload" apps in my drawer...do you know what files these are so I can remove them?

codeman05 said:
This looks to have worked fine.
However now I have a couple of "Payload" apps in my drawer...do you know what files these are so I can remove them?
Click to expand...
Click to collapse
Hmmm... payload... could you possibly upload a picture? or...
1.is it a custom launcher?
2.do they have custom icons, or are they the stock "these apps have no icon" icons?
3.if it is a custom launcher, are the apps uninstallable?

photonicgeek said:
Hmmm... payload... could you possibly upload a picture? or...
1.is it a custom launcher?
2.do they have custom icons, or are they the stock "these apps have no icon" icons?
3.if it is a custom launcher, are the apps uninstallable?
Click to expand...
Click to collapse
No, no custom launcher yet.
It's in the "stock" app drawer and they do not have an icon, just the generic green android guy.
I'll see if I can get a screenshot

codeman05 said:
No, no custom launcher yet.
It's in the "stock" app drawer and they do not have an icon, just the generic green android guy.
I'll see if I can get a screenshot
Click to expand...
Click to collapse
I figure you can try restoring again!

codeman05 said:
No, no custom launcher yet.
It's in the "stock" app drawer and they do not have an icon, just the generic green android guy.
I'll see if I can get a screenshot
Click to expand...
Click to collapse
Well I loaded Nova and was able to uninstall them with that so all it well!
On a side note...I found out something you guys may have already figured out, but figured it was worth sharing just in case.
To get into download mode:
1. Hold down power until the screen says "rebooting"
2. Start tapping the power button until you get into the "Boot" menu
3. tap power to cycle to "Download"
4. long press (~3 seconds) to select Download mode
You can then odin the image referenced in the OP.
Handy if you screw up the build prop changing the DPI like I did initially

codeman05 said:
Well I loaded Nova and was able to uninstall them with that so all it well!
On a side note...I found out something you guys may have already figured out, but figured it was worth sharing just in case.
To get into download mode:
1. Hold down power until the screen says "rebooting"
2. Start tapping the power button until you get into the "Boot" menu
3. tap power to cycle to "Download"
4. long press (~3 seconds) to select Download mode
You can then odin the image referenced in the OP.
Handy if you screw up the build prop changing the DPI like I did initially
Click to expand...
Click to collapse
Actually, I'm glad you found that!! I've been using ADB all this time!

Mods,
PLEASE pin this thread!

Hey does anyone know if
a) you can get notifications from 3rd party sms apps like handcent and
b) if you can respond to sms by typing yet? its pretty annoying when you get a text on your gear and you're somewhere loud, then you gotta take out your phone and respond. please if anyone knows these answers cant wait for this to take off....pretty excited.

this looks interesting! will have to try it on my gear :laugh:

[TOOL] Ouya SuperScript - One click CWM, Root, Xposed & Play Store for Windows

Ouya SuperScript
By TehCrucible
v0.1​
INTRODUCTION
So I originally wrote this batch script to simplify and combine some of the most frequently used tweaks on the forums for my own sake, to speed up my tinkering with the Ouya but I've decided to clean it up and upload it in case anyone else wants to use it.
This script is designed as a "one-click" modification tool for a stock Ouya on the latest firmware. Please read this guide carefully.
I ACCEPT NO RESPONSIBILITY FOR ANY DAMAGE OR DATA LOSS. This script is built on the work of many others much smarter than myself and be sure to check the credits.
SO WHAT DOES IT DO?
In a nutshell:
- Install Clockworkmod Recovery
- Root Ouya
- Install Xposed Framework
- Install Google Play Store
WHAT DO I NEED?
- A Windows PC. I have included drivers for both x86 and x64.
- A Micro USB cable.
INSTALLATION OVERVIEW
1. Update your Ouya to latest stock firmware
2. Install ADB drivers
3. Run the script
4. Play some games!
There's a more detailed step-by-step in the included README.txt file.
KNOWN ISSUES
- None
CREDITS & THANKS
WonderEkin
mybook4
elmerohueso
fatesausage
DOWNLOAD
Here

Thanks a lot for this. A lo of people have been asking about an automated method to get the play store running on the OUYA...

Great works. I just think of root my ouya....

A quick update:
It's working. I'm on the latest firmaware which is JZO54L-OUYA, kernel version 3.1.10-g780994a. Completely stock, but I had already rooted my OUYA.
Anyway, I enabled the Wireless ADB which will instantly show you the ip and port, installed the drivers for 64bit. Then open CMD and type: adb connect "iport"
Then I ran the superscript and everything went fine.
Hope this helps. I didn't even have to connect with a wire.
But I guess if you wanna install the CWM recovery you should be connected with a wire...

Hello guys!
I can see the Ouya in Device list in Control panel but I can't connect it in SuperScript. Any ideas?
THX

zmelkoow said:
Hello guys!
I can see the Ouya in Device list in Control panel but I can't connect it in SuperScript. Any ideas?
THX
Click to expand...
Click to collapse
Did you install the drivers right? If yes, then you should open the folder where you extracted your files and right click while holding shift then choose open CMD here. Then write: adb devices
If your device is there, it will give you an output of the IMEI and name of device
From there, you can then tell us what the error is and hopefully we can resolve it...

zmelkoow said:
Hello guys!
I can see the Ouya in Device list in Control panel but I can't connect it in SuperScript. Any ideas?
THX
Click to expand...
Click to collapse
that happened to me yesterday, but I overcame it by have my computer plugged into the Ouya then reboot the ouya and as soon as the computer recognized it started the script and it worked.

but I have an issue too
So I can run the script everything works except getting the recovery installed. the command prompt acts like it successfully installed the recovery then the Ouya proceeds to reboot into recovery mode. When that happens I get this menu? Nothing happens when I push any buttons on my keyboard. This doesn't look like a custom recovery.

I have tried this many times, did a factory reset and started fresh however even after updating the device driver it doesnt recognize the ouya....

unkoil said:
So I can run the script everything works except getting the recovery installed. the command prompt acts like it successfully installed the recovery then the Ouya proceeds to reboot into recovery mode. When that happens I get this menu? Nothing happens when I push any buttons on my keyboard. This doesn't look like a custom recovery.
Click to expand...
Click to collapse
No it doesn't :angel:.
I think I had the recovery installed when I first got the device a long time ago and I used the manual method in this thread, but I'm not sure that it works any more. Also do you have a wired or wireless keyboard? By the way only the Bluetooth keyboard doesn't work. May be if you can install the recovery from that thread, then you can proceed to the next step. One last thing, I don't think you will need the recovery except if you want to install CM or something. Other than that, I never used it before.
TRMB said:
I have tried this many times, did a factory reset and started fresh however even after updating the device driver it doesn't recognize the ouya....
Click to expand...
Click to collapse
Which version of windows are you on? Is it Windows 8 or 8.1? Do you know how to disable driver signature verification?
Also, what does it say when you connect? Just nothing, or not recognized or what? You can try the adb wireless, go into settings/development on the ouya and activate it. Then open CMD from the extracted folder and type adb connect "ip : port" then check by typing "adb devices". Let us know what happens after that.

Which version of windows are you on? Is it Windows 8 or 8.1? Do you know how to disable driver signature verification?
Also, what does it say when you connect? Just nothing, or not recognized or what? You can try the adb wireless, go into settings/development on the ouya and activate it. Then open CMD from the extracted folder and type adb connect "ip : port" then check by typing "adb devices". Let us know what happens after that.[/QUOTE]
I have tried both from my windows 7 computer and 8.1 laptop. It showed up just as you said "missing driver", sent it to the drivers part of SS to get the driver, it said it installed but when i run the SS and hit option "1" it comes up blank...

ahmadshawki said:
No it doesn't :angel:.
I think I had the recovery installed when I first got the device a long time ago and I used the manual method in this thread, but I'm not sure that it works any more. Also do you have a wired or wireless keyboard? By the way only the Bluetooth keyboard doesn't work. May be if you can install the recovery from that thread, then you can proceed to the next step. One last thing, I don't think you will need the recovery except if you want to install CM or something. Other than that, I never used it before.
I am having the same issue but not only with this method, I have also tried to install CWM with oneclicks auto and manual method to no avail.....
any suggestions?
Click to expand...
Click to collapse

always says it installed but will only boot into stock recovery

TRMB said:
always says it installed but will only boot into stock recovery
Click to expand...
Click to collapse
I can see from your posts that you tried everything and I'm so sorry that I'm just a user and not a developer or something. May be you can try sideloading terminal and try CWM manually (if you haven't already) or sideload ROM Toolbox and try the flash recovery option.
That's all I got. But if I were you, I won't bother about the CWM at all. It's useless.
As for the Play store, try the mod that I attached in my reply and let me know if this one works for you...

Unfortunately the link is not working. Is it possible to update it, please?

What I do if my micro usb is broken :/. I only have wireless adb

.. nice .. now my ouya will run again .. thanks

I already tried everything but I can't make this work... I installed every single drive in every single way.
The best screenshot of the whole situation is on attachment. SuperScript simply doesn't recognize OUYA with default drivers, neither provided drivers (or any of its variation like "composite adb" or something like that. The "List of devices attached" always return empty, even when provided drivers installed (signature deactivated and everything else). As readme says, when SuperScript doesn't recognize, it returns "error: device not found" every time that I try something...
This SuperScript seems great to start things on my my untouched and default OUYA... but I'm honestly out of options.

vinirockman said:
I already tried everything but I can't make this work... I installed every single drive in every single way.
The best screenshot of the whole situation is on attachment. SuperScript simply doesn't recognize OUYA with default drivers, neither provided drivers (or any of its variation like "composite adb" or something like that. The "List of devices attached" always return empty, even when provided drivers installed (signature deactivated and everything else). As readme says, when SuperScript doesn't recognize, it returns "error: device not found" every time that I try something...
This SuperScript seems great to start things on my my untouched and default OUYA... but I'm honestly out of options.
Click to expand...
Click to collapse
Problem solved. It is Windows Drivers issue. S-Config did a great job explaining how you should do this HERE. I hope it helps people who got stuck. SuperScript did work, I did installed CWM but I was not able to navigate (neither thru bluetooth usb full keyboard). I'm going to try to figure out what I'm missing later. As I can see, S-Config's website is fully updated... I do highly recommend read there who is going to do anything with ouya.

vinirockman said:
Problem solved. It is Windows Drivers issue. S-Config did a great job explaining how you should do this HERE. I hope it helps people who got stuck. SuperScript did work, I did installed CWM but I was not able to navigate (neither thru bluetooth usb full keyboard). I'm going to try to figure out what I'm missing later. As I can see, S-Config's website is fully updated... I do highly recommend read there who is going to do anything with ouya.
Click to expand...
Click to collapse
.. CWM need wired usb keyboard no navigate .. i don't remember if it can do it via bluetooth

Cannot Get Drivers Installed for Windows 8.1 - Manual Installation or SDK

I cannot possibly figure out what the heck is causing my Windows 8.1 Installation to not detect my Nexus 6. Google comes up with TONS of results for this issue, but all troubleshooting points to what I have already done.
Plug it in, comes up as "Nexus 6" under "Other Devices" in Device Manager. With the little Yellow ! mark.
Downloaded the USB drivers from here - http://developer.android.com/sdk/win-usb.html attempted to install them and I get an error message. After selecting the folder that contains the driver.
"Windows was unable to install your Nexus 6: Windows could not find the driver software for your device. If you know the manufacturer of your device, you can visit its website and check the support section for driver software"
What I have Tried:
- Installing Drivers with USB Debugging ON and OFF
- Installing Drivers with Connection set to MTP and PTP on the phone
- Disabled Driver Signature Enforcement and attempted to install.
- Downloading Drivers a second time to ensure no corruption was in the file.
- Attempted to install via Android SDK (This appears to work per SDK software, but Device Manager shows no change, and the nexus isnt showing up in Explorer.)
- Tested Nexus on another Device. (Running Windows 7. Literally Plug and play No manual Installation needed. Worked)
I'm at total Loss here, Any other Ideas?

@morbid_bean,
Did you try the Motorola Device Manager >https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481

Thanks for the reply. Unfortunately that seems to have done nothing

I'd go w/ uninstall all other drivers first, change cables and see what happens.

Try this:
1) Download the driver from the link in your post, and unzip the files to any location;
2) Open Device Manager on your PC and turn on the option to "Show hidden devices" from the View menu;
3) Right click on EVERY item that could potentially relate to your device (e.g., adb interface, composite interface, motorola, nexus, etc.) and uninstall, including deleting the driver.
4) With USB Debugging set to OFF, plug your device into your PC. Windows should automatically install the MTP driver and It should be recognized;
5) Now turn USB Debugging ON;
6) Go back into Device Manager, right click on your device and select "Update driver software";
7) Select "Browse my computer...", NOT "Search automatically...";
8) Click "Browse", and locate the driver you downloaded in step 1.
EDIT: I don't think you have to disable Driver Signature Enforcement, but if it gives you issues, try disabling it.

morbid_bean said:
Thanks for the reply. Unfortunately that seems to have done nothing
Click to expand...
Click to collapse
This is a long shot, but you did install the Java JDK, right?

cam30era said:
This is a long shot, but you did install the Java JDK, right?
Click to expand...
Click to collapse
You do not need the JDK to install the drivers...

efrant said:
You do not need the JDK to install the drivers...
Click to expand...
Click to collapse
I understand. OP has diagnosed his problem as drivers, but if his problem is ADB not connecting to his N6, it could be the problem. As I said, it's a long shot.

OP Here with a status update.
Continued to try some other suggestions. Such as another Cable, another USB port, reboots. Hell I seriously went as far as a whole Windows 8.1 Re-install. I had some feeling that possibility because I am rooted its causing issues; so I even went as far as taking my old Nexus 4 and reverted it to 100% stock to attempt to install the drivers and then trying the nexus 6. But I got same results.
efrant said:
Try this:
1) Download the driver from the link in your post, and unzip the files to any location;
2) Open Device Manager on your PC and turn on the option to "Show hidden devices" from the View menu;
3) Right click on EVERY item that could potentially relate to your device (e.g., adb interface, composite interface, motorola, nexus, etc.);
4) With USB Debugging set to OFF, plug your device into your PC. Windows should automatically install the MTP driver and It should be recognized;
5) Now turn USB Debugging ON;
6) Go back into Device Manager, right click on your device and select "Update driver software";
7) Select "Browse my computer...", NOT "Search automatically...";
8) Click "Browse", and locate the driver you downloaded in step 1.
EDIT: I don't think you have to disable Driver Signature Enforcement, but if it gives you issues, try disabling it.
Click to expand...
Click to collapse
When I follow these steps I was successfully able to install drivers for something called "Android Composite ADB Interface"; "MTP" or "Nexus 6" was still failing. Even after switching debugging on. I still unfortunately do not see anything in Explorer that I can access the Nexus 6's files. Maybe this is an indicator that I am getting closer?
cam30era said:
This is a long shot, but you did install the Java JDK, right?
Click to expand...
Click to collapse
When I installed Android SDK, it told me I needed JDK before proceeding with the installation. So I'm pretty sure I did this.

morbid_bean said:
When I follow these steps I was successfully able to install drivers for something called "Android Composite ADB Interface"; "MTP" or "Nexus 6" was still failing. Even after switching debugging on. I still unfortunately do not see anything in Explorer that I can access the Nexus 6's files. Maybe this is an indicator that I am getting closer?
Click to expand...
Click to collapse
I just realized that the last part on my step 3 was cut off. It should read:
3) Right click on EVERY item that could potentially relate to your device (e.g., adb interface, composite interface, motorola, nexus, etc.) and uninstall, including deleting the driver.
As far as your issue, I'm pretty sure that Windos recognizes the N6 as an MTP device (assuming you have it on MTP) without any additional drivers, so I'm not sure what the problem is. My steps were to get the ADB driver installed, which seems to have worked. (ADB allows you access to your files via command line...)
Sent from my Nexus 6 using Tapatalk

FIXED IT!
I am running a version of Windows 8.1 known as Windows 8.1 Pro N Essentially this is a slightly stripped down version and does not include "Windows Media Player or other Windows Media-related technologies, such as Windows Media Center and Windows DVD Maker" I managed to get this copy really cheap.
More Info Here
So essentially I needed to download THIS Pack/Update which gave me these special features. Including the resolution of my Driver Problem. Rebooted the computer plugged in my phone and it was detected and installed drivers automatically.
Special Credit to THIS thread for helping me with the answer. I hope this can be added to any Driver Installation Guide or Sticky to assist others that may come across this problem.

Glad you got it resolved. I've never heard of Pro N. Another wrinkle in the Windows 8.1 driver issues, it seams.

Recently I have been deving on a friends nexus 6 with 5.1.1 on it all drivers are installed properly device shows in adb i even get adb root successful but it refuses to adb remount for testing purposes even on roms that have modified boot.img's with init.d in them and ro.secure=0 set and adb persistance is also set so there is no reason for it not to mount. I imagine there could be a problem with it mounting system on boot but I am new to aosp 5.1.1 roms and this solution did not work for me it tells me the windows 8.1 version I'm running is not applicable for this update? So if anyone can lend some assistance it would be much appreciated.
The Nexus 6 is VZW unlocked bootloader and rooted twrp recovery all the latest
currently any rom i try i cant mount through adb so testing for themes is impossible?

Pneuma1985 said:
Recently I have been deving on a friends nexus 6 with 5.1.1 on it all drivers are installed properly device shows in adb i even get adb root successful but it refuses to adb remount for testing purposes even on roms that have modified boot.img's with init.d in them and ro.secure=0 set and adb persistance is also set so there is no reason for it not to mount. I imagine there could be a problem with it mounting system on boot but I am new to aosp 5.1.1 roms and this solution did not work for me it tells me the windows 8.1 version I'm running is not applicable for this update? So if anyone can lend some assistance it would be much appreciated.
The Nexus 6 is VZW unlocked bootloader and rooted twrp recovery all the latest
currently any rom i try i cant mount through adb so testing for themes is impossible?
Click to expand...
Click to collapse
Have you tried this:
http://forum.xda-developers.com/showthread.php?t=2588979

Evolution_Freak said:
Have you tried this:
http://forum.xda-developers.com/showthread.php?t=2588979
Click to expand...
Click to collapse
My question is: Why would old google universal adb drivers work when everyone else says to use the new google usb drivers in tandem with the Motorola drivers for vzw? Thats the only reason i didnt use the tool is b/c its outdated?

Pneuma1985 said:
My question is: Why would old google universal adb drivers work when everyone else says to use the new google usb drivers in tandem with the Motorola drivers for vzw? Thats the only reason i didnt use the tool is b/c its outdated?
Click to expand...
Click to collapse
But alas! It does work, I've tested it myself. Also, you can install the most recent drivers optionally.

Evolution_Freak said:
But alas! It does work, I've tested it myself. Also, you can install the most recent drivers optionally.
Click to expand...
Click to collapse
I just tested it and it does not work i still get permissions denied when i try to remount it.

Pneuma1985 said:
I just tested it and it does not work i still get permissions denied when i try to remount it.
Click to expand...
Click to collapse
I don't usually recommend toolkits but you could try this:
http://forum.xda-developers.com/showthread.php?t=2947452

Evolution_Freak said:
I don't usually recommend toolkits but you could try this:
http://forum.xda-developers.com/showthread.php?t=2947452
Click to expand...
Click to collapse
Yup that didnt work either. I get su in adbshell it shows me # so there is su i just dont get why it wont mount at all or pull or push obviously cant do that if it won't mount. And no tutorial I've followed nor solution has worked thus far. As stated above that solution worked for him with windows media center or whatever but that doesnt apply to me. I've done this hundreds of times with many many many devices on windows 7 I've even done it with 3 devices on 8.1 so far no problems this is the only one to give me issues like this.
It's always a bit of messing around with it to get it to work but this is different i have spent hours going back and forth removing all drivers installing new ones using tools etc.