* At first, i would say, that i am not responsible for any action you do, since downloading attached files. Everything you do with files or advices in this thread, you do on your own responsibility.
This is ONLY for LG L90 D405N phone, not any other version of LG L90. Flashing attached ROM to any other device than LG L90 D405N will probably brick your phone!
Now to the point:
I somehow managed to softbrick my phone the day i bought it, and only possibility for me was to flash custom rom. But any of the available custom rom's has caught my heart, so i decided to get back to Stock. As i found, there was only old v10A version flashable available to download on internet, or possibility to flash original firmware from KDZ file via USB. Since original firmware KDZ file flashing via USB was not working for me (still don't know why), and v10A is way too old (current version is v10D) i extracted actual v10D original firmware KDZ file and made it flashable via recovery (CWM, TWRP). Of course you need CWM or TWRP first to flash this. I assume you already got it. If you don't, just google it, how to flash custom recovery on your phone.
Lollipop 5.0.2 Download:
LG L90 D405N v20A Stock rom
http://ulozto.cz/xFZyFfny/lg-d405n-stock-v20a-zip
(Click on zip archive picture, then write down captcha and click on "Stáhnout" bellow)
After flashing Lollipop Stock Rom on previous KitKat or KitKat based Rom, you need to flash Lollipop Bootstack as well, or you won't be able to use your mobile data!!!
You can get D405n Lollipop Bootstack file here:
http://forum.xda-developers.com/lg-l90/development/bootstack-kk-l-l90-t3118632
Kitkat 4.4.2 Download:
LG L90 D405N v10D Stock rom
http://www.mediafire.com/download/myakvyqwmib9q0q/D405N_Stock_v10D.zip
or
http://ulozto.cz/xmffYFiW/d405n-stock-v10d-zip
(Click on zip archive picture, then write down captcha and click on "Stáhnout" bellow)
nice idea but there is no file
Dangerous File Blocked
The file you attempted to download was determined to be dangerous. For your protection, MediaFire does not enable distribution of dangerous files.
Still have questions, or think we've made a mistake? Please contact support for further assistance.
Click to expand...
Click to collapse
redcom7 said:
nice idea but there is no file
Click to expand...
Click to collapse
Ok, i uploaded it into another filehosting site. It is in czech language, instrucitons on how to download are bellow link in original post. Hope it works now
MichailCZ said:
Ok, i uploaded it into another filehosting site. It is in czech language, instrucitons on how to download are bellow link in original post. Hope it works now
Click to expand...
Click to collapse
works good now thank you ... my wife's l90 is rooted and with custom recovery ...
can i dirty flash this one just to have the latest rom ???
another thought is to flash slimrom with knock on for more speed .....
but thank you for this ..
redcom7 said:
works good now thank you ... my wife's l90 is rooted and with custom recovery ...
can i dirty flash this one just to have the latest rom ???
another thought is to flash slimrom with knock on for more speed .....
but thank you for this ..
Click to expand...
Click to collapse
This is clean Stock rom without any intervention, so dirty flash should work on previous stock rom. But i highly recommend clean flash, just to be sure, everything works smooth. You won't lose your custom recovery, but you will have to root again.
MichailCZ said:
This is clean Stock rom without any intervention, so dirty flash should work on previous stock rom. But i highly recommend clean flash, just to be sure, everything works smooth. You won't lose your custom recovery, but you will have to root again.
Click to expand...
Click to collapse
@MichailCZ it seems lollipop was released for D405n in India, Romania and other countries... will you post it here? if i have your last rom, will i get it via OTA (once released)? Thank you
giamanto said:
@MichailCZ it seems lollipop was released for D405n in India, Romania and other countries... will you post it here? if i have your last rom, will i get it via OTA (once released)? Thank you
Click to expand...
Click to collapse
Yes, I will put D405n Lollipop Stock Rom, flashable via custom recovery, here.
Wow perfect! Anybide about ETA? Always thank you @MichailCZ
Sent from my LG-D405 using XDA Free mobile app
Well, you can't get update via OTA, since you are rooted.
But do you think that if I remove root I will already have the update?
Sent from my LG-D405 using XDA Free mobile app
giamanto said:
But do you think that if I remove root I will already have the update?
Sent from my LG-D405 using XDA Free mobile app
Click to expand...
Click to collapse
Well, the question is, how do you remove root. If by "unroot" ability from SuperSU app, it won't work. How to unroot for sucesfully OTA update, I don't know to be honest.
What if i flash your ROM from zero wiping everything. I will not have root permission... Right?
Sent from my LG-D405 using XDA Free mobile app
giamanto said:
What if i flash your ROM from zero wiping everything. I will not have root permission... Right?
Sent from my LG-D405 using XDA Free mobile app
Click to expand...
Click to collapse
Well, that actually should work, but i can't guarentee that.
OK... Once done, do you think it will update to lollipop? Do you have lollipop?
Sent from my LG-D405 using XDA Free mobile app
I am also waiting for @MichailCZ to upload here the new lollipop .zip file to upgrade my wife's L90 405n as i allready flash the previous rom and all are very stable and fast ...
but as i can see we have to wait to have the LG official release at first
So, we finally have Official lollipop for all variants from a while now.
Maybe someone could post the flashable .zip for D405N Stock Lollipop, as I don't really like to unroot and Bootloader lock flash kdz then unlock etc. It's messy any could brick device, even if I did it successfuly from the first time...
freeman94 said:
So, we finally have Official lollipop for all variants from a while now.
Maybe someone could post the flashable .zip for D405N Stock Lollipop, as I don't really like to unroot and Bootloader lock flash kdz then unlock etc. It's messy any could brick device, even if I did it successfuly from the first time...
Click to expand...
Click to collapse
It cant be done so easily because stock LP is version 20 baseband and stock KK is version 10.. Nevertheless cm12.1 is way better(no ir and bad camera only issues on d405n) and its still in v10 baseband..
Enviado do meu LG-D405n através de Tapatalk
Warimation said:
It cant be done so easily because stock LP is version 20 baseband and stock KK is version 10.. Nevertheless cm12.1 is way better(no ir and bad camera only issues on d405n) and its still in v10 baseband..
Enviado do meu LG-D405n através de Tapatalk
Click to expand...
Click to collapse
So you suggest to flash cm12 ? And we do not have to wait for LP zip?
redcom7 said:
So you suggest to flash cm12 ? And we do not have to wait for LP zip?
Click to expand...
Click to collapse
Yes. Just make sure to backup your phone first.. Go here for 1st time
Quarx.cm-for.us/device-w7.html
Then you will have daily updates on phone.
For gapps
Forum.xda-developers.com/Android/software/gapps-google-apps-minimal-edition-t2943330
(dont forget to install 5.1 gapps)
Enviado do meu LG-D405n através de Tapatalk
Warimation said:
It cant be done so easily because stock LP is version 20 baseband and stock KK is version 10.. Nevertheless cm12.1 is way better(no ir and bad camera only issues on d405n) and its still in v10 baseband..
Enviado do meu LG-D405n através de Tapatalk
Click to expand...
Click to collapse
I think it can be done quite easy.
Related
Instructions:
1a/ Download the official ROM:
v20g (RO): http://www.multiupload.com/UP2GYKHGBS
SHA1: 7542c7472fa393573baeeeedac3c0d67e767d2f3
MD5: b0ee4db1d25bd96f19491c7e019b60a4
v20c (BE,CIS,CZ,NL,PL,...): http://www.multiupload.com/H5Q604BNJ9
SHA1: b12bb2b58d10e53eb219987e1a92faa9d7f7c6e5
MD5: c80d910ea7ef5ab07dfee7707492ef3b
1b/ Download u-2.3.6.3-efgh-signed.zip, copy to SD card (http://goo-inside.me/superuser/su-2....fgh-signed.zip).
In case you do not want root, skip this and steps 4, 5.
All PEBKAC questions go to General section, not here!
2/ Unpack LG-P500-v20g.7z with 7Zip or whatever
3/ Run LGMDP-v1.5.exe from the folder where you unpacked it and flash it the "Russian way"... For a walktrough on using this tool, see my Flash baseband HOWTO. (Note: I have replaced the stock recovery with CWM 3.1.0.0. In case you already have a custom recovery installed, just uncheck the box.)
4/ Reboot into recovery, flash su-2.3.6.3-cd-signed.zip.
5/ Install Busybox Installer from Market, install busybox.
6/ Done!
Bonus:
Kernel with overclocking: check this thread
Caveats: Switching to another ROM (not based on official v20 ROM):
- either flash only the stock 2.2.x baseband via LGMDP-v1.5.exe, see my Flash baseband HOWTO.
- or flash stock 2.2.x ROM via KDZ; or
- (for CM7 ROMs only): - after flashing ROM via ZIP, reboot and flash mik's new-baseband-patch-signed.zip from recovery[/B]! If you encounter issues, report them to mik_os (his CyanogenMod 7.1 thread), NOT to me, I cannot fix it!
Known bug: No 2G/3G data - wait for a new release.
Click to expand...
Click to collapse
FAQ:
Q: Can you upload v20B/D/... as well?
A: NO! I have better things to do than wasting my time with slow uploads. You can prepare the ROM yourself, just follow [HOWTO] Cook your custom rom for LG P500. Note: You only need steps 1-2. After that, replace recovery.img with one of your choice from here. Not to mention that the ROMs are essentially the same for everyone, save for country/OEM-specific bloat.
Didn't know it was already out :O I'm gonna test this soon!
God I hate LG. Why did "he" change tha baseband? Damnit!
ciaox said:
God I hate LG. Why did "he" change tha baseband? Damnit!
Click to expand...
Click to collapse
+1.
Hey people if i flash the v20g using kdz or lg pc suite and then root, install recovery, etc... it will be the same, right?
bgdxv said:
Hey people if i flash the v20g using kdz or lg pc suite and then root, install recovery, it will be the same, right?
Click to expand...
Click to collapse
Yeah, except that noone made GingerBreak or SuperOneclick working on this.
doktornotor said:
Yeah, except that noone made GingerBreak or SuperOneclick working on this.
Click to expand...
Click to collapse
I read somewhere that superoneclick works
bgdxv said:
I read somewhere that superoneclick works
Click to expand...
Click to collapse
And I read somewhere that it does not. Some people requested this, so it is posted. Otherwise, noone forces you to use it.
Kde se to najednou vzalo? .. What brings it here suddenly
Why to use the original when is so slow ?
I rather wait for Mike. Which is awesome and can be the best. So is Andy
Sent from my LG-P500 using XDA Premium App
Russian Way
Can you post the steps for the Russian way? Also will this mess up you baseband so that we cannot go back to another firmware?
In Russia you dont flash phone, phone flashes you.
Lawful123 said:
Can you post the steps for the Russian way? Also will this mess up you baseband so that we cannot go back to another firmware?
Click to expand...
Click to collapse
Already posted on another thread, so no, I do not feel like doing another cut-and-paste job, use search please.
Going back to 2.2/2.3 ROMs not based on LG's v20 -> flash stock 2.2.x with KDZ (as also already written on another thread as well.) That is the whole purpose why I uploaded the stupid 100+ megs file, after all.
Does flashing the "Russian" method will wipe my data?
Layio said:
Does flashing the "Russian" method will wipe my data?
Click to expand...
Click to collapse
It wipes everything on your phone.
Layio said:
Does flashing the "Russian" method will wipe my data?
Click to expand...
Click to collapse
Don't wipe anything ... just flash v20g.zip using recovery
k4ce said:
Don't wipe anything ... just flash v20g.zip using recovery
Click to expand...
Click to collapse
Yeah... you can have a nice MP3/MP4 player and gaming device that way; just the phone functionality will be missing. Everyone NOT already using the leaked 20a and ROMs based on it MUST flash it via the EXE.
aragarm said:
Why to use the original when is so slow ?
Click to expand...
Click to collapse
Exactly, plus there is no point going through such a long procedure. I suggest you to wait until the sources are out to get the best rom by the best devs of our section.
wat are the changes... am using v20a...
novjean said:
wat are the changes... am using v20a...
Click to expand...
Click to collapse
NFC. Ask LG or do the test monkey job.
Hi all.
I see in the forum is missing a zip pack of the stock rom, can someone do it?
Is not important if debloated or not, just stock base rom in CWM pack with boot.img too maybe.
Thanks
Pesach85 said:
Hi all.
I see in the forum is missing a zip pack of the stock rom, can someone do it?
Is not important if debloated or not, just stock base rom in CWM pack with boot.img too maybe.
Thanks
Click to expand...
Click to collapse
I was just about to ask about this, the debloated v20a doesn't have valid links anymore. Just standard v20a would be great
you can always try zaiben rom
philip.morris said:
you can always try zaiben rom
Click to expand...
Click to collapse
Zaiben is not entire rom, for this i asked
Sent from my Optimusx4 using Tapatalk 4 Beta
Check out this.
Sent from my LG-P880
That version requires a pre installed v20a too
Sent from my Optimusx4 using Tapatalk 4 Beta
If there would be a ZIP version to restore stock, I would hail that as well -- as most likely will all non-Windows users! It would be great to have the possibility to flash stock (ROM and recovery) on non-Windows systems. I wasn't aware I need a Windows license to operate an Android phone...
Hello everyone.
I want to install IZS and I'm not sure if I'm correct, because as you can see English is not my native language.
I have a very old CM build (android 4.1.2 - 10-20121023-nightly-p970) with working CWM (I tried to reboot to recovery and it was successful), kernel 3.0.8-CM, baseband lgp970at-00-V10e-EEU.
If I want to install IZS, I just need to: download zips, access CWM, do wipe data / factory reset, install zips and patched v20 u-boot and everything will be okay? I don't know anything about V30 baseband and locked bootloader (I didn't follow news about p970 development since December 2012), I need working GPS this week, so I don't want to break anything.
Thank you in advance!
t4bris said:
Hello everyone.
I want to install IZS and I'm not sure if I'm correct, because as you can see English is not my native language.
I have a very old CM build (android 4.1.2 - 10-20121023-nightly-p970) with working CWM (I tried to reboot to recovery and it was successful), kernel 3.0.8-CM, baseband lgp970at-00-V10e-EEU.
If I want to install IZS, I just need to: download zips, access CWM, do wipe data / factory reset, install zips and patched v20 u-boot and everything will be okay? I don't know anything about V30 baseband and locked bootloader (I didn't follow news about p970 development since December 2012), I need working GPS this week, so I don't want to break anything.
Thank you in advance!
Click to expand...
Click to collapse
First,You download V1 and V1.1 from the blog,then reboot recovery and do a full wipe.Flash both files(V1 first then V1.1)Then enjoy!Do a nandroid just in case and it is recommended to flash the new baseband.
Sent from my LG-P970 using Tapatalk 4
BlackPie said:
First,You download V1 and V1.1 from the blog,then reboot recovery and do a full wipe.Flash both files(V1 first then V1.1)Then enjoy!Do a nandroid just in case and it is recommended to flash the new baseband.
Sent from my LG-P970 using Tapatalk 4
Click to expand...
Click to collapse
Thanks, so my v10e baseband (and probably old bootloader?) is not a problem?
I have question, do you have screen off animation in this version ? If yes can you uplod this version? (Backup from recevery or maybe .zip folder.
@up Anyway i have one of the first models of this phone with v10a (bought month after release this model) firmware and every rom i have installed works(many)
Tapatalked from LG P970
t4bris said:
Thanks, so my v10e baseband (and probably old bootloader?) is not a problem?
Click to expand...
Click to collapse
Nope.
Sent from my LG-P970 using Tapatalk 4
Bananek said:
I have question, do you have screen off animation in this version ? If yes can you uplod this version? (Backup from recevery or maybe .zip folder.
Click to expand...
Click to collapse
I'm guessing you are talking avout CRT Off animation. Use IZS V2. AFAIK it has Xposed framework. You can activate it with that... But i haven't tried it yet so i can not say it for sure. But if you are going to install IZS, intall V2.
*Link removed due to laking needed partitions.
xdabbeb will upload flashable zip file soon.
Great work, I was hoping to see this soon. Thanks!!
Cloudyfa said:
Since many people pm'ed me about the flashable zip file for VS980. So here it is:
VS980 ROM:
http://www.androidfilehost.com/?fid=23329332407583931
(MD5: 7fff11c1950cf441e513cdcab2e132f7)
VS980 KK Baseband:
http://www.androidfilehost.com/?fid=23329332407582725
(MD5: 4fdb8478734ba5e91ff8a2db644b88aa)
Remember to keep a copy of your working ROM so you can flash it if anything wrong happend. This ROM already included the system, kernel and modules needed for KitKat. (thanks for @xdabbeb's patched kernel)
This is untouched VS980 OTA KitKat ROM in flashable zip format (you can find @xdabbeb's manually method here: http://forum.xda-developers.com/showthread.php?t=2699123).
Thanks @xdabbeb, @Savoca and @JackpotClavin for their hard work.
Click to expand...
Click to collapse
I'm on malladus 1.2.9, can I just flash this over, or do I need to revert to stock 12b first? Thanks
You sir are a gentlemen and a scholar. If this works you will be getting paid. Thanks
Sent from my LG-VS980 using XDA Premium 4 mobile app
Glad I woke up early. Downloading now....
Thnx @Cloudyfa for putting up the ROM for us.
If i understand it correctly i can simply flash the rom and baseband zip file.
Iam currently running SlimKat 4.4.2 AOSP ROm on 12B everything (baseband/modem/bootloader etc) with CWM 6.0.4.4.
I never took 24A LG KK update.
Is my understanding correct ?
I knew this was coming, spent a ton of time getting back to stock (had to use tot method after fighting kdz method) just last night. Oh well upward and onwards, to infinity and beyond.
I am still on 11A is flashing this going to be an issue?
Thnx @Cloudyfa
Cloudyfa said:
Since many people pm'ed me about the flashable zip file for VS980. So here it is:
VS980 ROM:
http://www.androidfilehost.com/?fid=23329332407583931
(MD5: 7fff11c1950cf441e513cdcab2e132f7)
VS980 KK Baseband:
http://www.androidfilehost.com/?fid=23329332407582725
(MD5: 4fdb8478734ba5e91ff8a2db644b88aa)
Remember to keep a copy of your working ROM so you can flash it if anything wrong happend. This ROM already included the system, kernel and modules needed for KitKat. (thanks for @xdabbeb's patched kernel)
This is untouched VS980 OTA KitKat ROM in flashable zip format (you can find @xdabbeb's manually method here: http://forum.xda-developers.com/showthread.php?t=2699123).
Thanks @xdabbeb, @Savoca and @JackpotClavin for their hard work.
Click to expand...
Click to collapse
Thanks for this uplaod! Been waiting for a flashable version. This requires the latest TWRP (ver 2.7) to flash, correct?
Jimi Mack said:
I am still on 11A is flashing this going to be an issue?
Thnx @Cloudyfa
Click to expand...
Click to collapse
Try it and let us know?
Sent from my g2 using XDA Premium 4 mobile app
Do you have to be on 12b? Can you be on 11a?
Sent from my VS980 4G using Tapatalk
toxa24 said:
I'm on malladus 1.2.9, can I just flash this over, or do I need to revert to stock 12b first? Thanks
Click to expand...
Click to collapse
Yes you can flash it over, but I recommend to revert to stock 12b first.
amit_sen said:
Thnx @Cloudyfa for putting up the ROM for us.
If i understand it correctly i can simply flash the rom and baseband zip file.
Iam currently running SlimKat 4.4.2 AOSP ROm on 12B everything (baseband/modem/bootloader etc) with CWM 6.0.4.4.
I never took 24A LG KK update.
Is my understanding correct ?
Click to expand...
Click to collapse
Yep correct
Jimi Mack said:
I am still on 11A is flashing this going to be an issue?
Thnx @Cloudyfa
Click to expand...
Click to collapse
SimsDelt said:
Do you have to be on 12b? Can you be on 11a?
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
You guys should upgrade to 12b first
kaosis said:
Thanks for this uplaod! Been waiting for a flashable version. This requires the latest TWRP (ver 2.7) to flash, correct?
Click to expand...
Click to collapse
Yes, I recommend using TWRP 2.7 or Philz 6.25
SimsDelt said:
Do you have to be on 12b? Can you be on 11a?
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
this. same question for me. I never upgraded to 12b...
That's a great question. Xdabbeb kernel has a 12b aboot check. None have determined that the check can be removed and still boot. I have no idea if it's a big deal. What I do know is that in 12b booted just fine with a 10a aboot. This tells me that 12b roms are satisfied by earlier aboots. Presumably because they are identical other than a version number.
Sent from my VS980 4G using XDA Premium 4 mobile app
Cloudyfa said:
You guys should upgrade to 12b first
Click to expand...
Click to collapse
May be off topic, but If i'm still on 11A, which rom would you recommend flashing first to get to 12b to then flash your rom?
http://forum.xda-developers.com/showthread.php?t=2533018
Is there a diffrent method you recommend to get from 11a to 12b to your rom?
Cloudyfa said:
Yes you can flash it over, but I recommend to revert to stock 12b first.
Click to expand...
Click to collapse
So...if we're on the rooted/debloated 12b, can we flash this over? I wouldn't mind trying to avoid the whole wipe/revert to stock thing if I can help it. Thanks!
In theory one only needs to dd the 12b aboot from jackpotclavin instructions. Can someone try that from a stock 12b rom like Malladus 1.2.9 rom then flash this after a full wipe minus internal storage. That seems cleaner than a dirty flash over 12b. I'd also suggest dd the 2.7.0.0 twrp after the aboot upgrade to ensure that it's aware of the new aboot.
Sent from my VS980 4G using XDA Premium 4 mobile app
ethanhunt123 said:
May be off topic, but If i'm still on 11A, which rom would you recommend flashing first to get to 12b to then flash your rom?
http://forum.xda-developers.com/showthread.php?t=2533018
Is there a diffrent method you recommend to get from 11a to 12b to your rom?
Click to expand...
Click to collapse
We need a bootstack, not a ROM, you must use kdz/tot method.
coolkatz321 said:
So...if we're on the rooted/debloated 12b, can we flash this over? I wouldn't mind trying to avoid the whole wipe/revert to stock thing if I can help it. Thanks!
Click to expand...
Click to collapse
I dont know if you mean you have 12B kdz/tot already or just using a 12B ROM on older bootstack. For easy understanding, what's your last kdz/tot ROM version. If its 12B then you're good to go.
@ ALL: for those unsure what you're doing (or currently have), you should flash 12B tot/kdz instead of messing around with different ROM combination.
I flashed according to the OP's instructions and it's been sitting at the white Verizon splash screen for a few minutes. The LED is fading from blue to green. Is this normal? I'd think, if anything, it'd hang up at the LG screen.
Cloudyfa said:
We need a bootstack, not a ROM, you must use kdz/tot method.
I dont know if you mean you have 12B kdz/tot already or just using a 12B ROM on older bootstack. For easy understanding, what's your last kdz/tot ROM version. If its 12B then you're good to go.
@ ALL: for those unsure what you're doing (or currently have), you should flash 12B tot/kdz instead of messing around with different ROM combination.
Click to expand...
Click to collapse
How do I check that? I'm not sure what kdz/tot means?
I just upgraded my moto x xt1052 kk to lp 5.1 , but I don't like lp, so I wanted to rollback to kk. Could anyone help me? Is it possible? Mine is rooted unlocked
dexter bob said:
I just upgraded my moto x xt1052 kk to lp 5.1 , but I don't like lp, so I wanted to rollback to kk. Could anyone help me? Is it possible? Mine is rooted unlocked
Click to expand...
Click to collapse
I think if you have an unlocked bootloader you can use RSD Lite to flash a kit kat image and the revert
You have to do the bootloader downgrade, or you will brick your phone because when you took the update, your bootloader also updated. Here's the link but it is risky And you can brick http://forum.xda-developers.com/showthread.php?t=3058202
BADDINOROX99 said:
I think if you have an unlocked bootloader you can use RSD Lite to flash a kit kat image and the revert
Click to expand...
Click to collapse
Um, not exactly.
GPT.BIN can't be downgraded. Parts of Mototboot.img can't be downgrade. We've seen issues of phones not working when the GPT/Motoboot are NEWER than the rom on the phone... i.e. someone tried to downgrade, or they started and failed flashing a newer SBF...
@dexter bob its a long story, which I've tried to explain (see the warning link in my signature), and some will say its safe, but I've seen way too many soft bricks (which could be recovered), hard bricks (could not be recovered so the phone is now a paperweight/door stop/trash), and others who just had some features/functions not working properly when they've attempted to downgrade, that I say... "Its your phone, you can do what you want, just please make an informed decision" and.... If you are ok with the very real possibility of rendering your phone useless, then sure do whatever you want, but if you can't afford to have a non-working phone, then do not attempt to downgrade.
ok i wont go for downgrade that but now i am using kk based cyanogen 11, that is "cm-11-20141115-SNAPSHOT-M12-ghost.zip ". i think it is kk based isn't it a downgrade? the thing is camera quality in kk 4.4.4 is good but i am not getting the same quality in cyanogen, how could i improve camera quality?
Just install eclipse or krypton.
They are both stock 4.4.4 based
Sent from my XT1052 using Tapatalk
dexter bob said:
ok i wont go for downgrade that but now i am using kk based cyanogen 11, that is "cm-11-20141115-SNAPSHOT-M12-ghost.zip ". i think it is kk based isn't it a downgrade? the thing is camera quality in kk 4.4.4 is good but i am not getting the same quality in cyanogen, how could i improve camera quality?
Click to expand...
Click to collapse
CM roms do not touch much beyond System.. It is safe to flash those, and revert back to your stock rom.
u can use the Fastboot tools to downgrade
来自我的 XT1058 上的 Tapatalk
dexter bob said:
ok i wont go for downgrade that but now i am using kk based cyanogen 11, that is "cm-11-20141115-SNAPSHOT-M12-ghost.zip ". i think it is kk based isn't it a downgrade? the thing is camera quality in kk 4.4.4 is good but i am not getting the same quality in cyanogen, how could i improve camera quality?
Click to expand...
Click to collapse
Try flashing moto camera, in question and answers sub forum there is a thread of some guy asking for links, I flashed one of these and working fine, but just camera, not gallery, or you will have problems with theme engine.
Enviado desde mi Moto X mediante Tapatalk
just download kk firmware you want and flash just system.img and boot.img then go to recovery and wipe data&cache.
i'm using 4.2.2 right now after i upgraded my xt1052 to 5.1 firmware. just flash system .img and boot.img via fastboot and wipe data&cache.
backup first!!!!!
BADDINOROX99 said:
I think if you have an unlocked bootloader you can use RSD Lite to flash a kit kat image and the revert
Click to expand...
Click to collapse
In the Moto X General Thread, the stock Lollipop ROMs with download links are available. Download both the Lollipop ROM and the Kitkat ROM for your device.
When you are flashing(Using Fastboot), all you need to do is flash the gpt.bin and motoboot.img from the Lollipop ROM instead of the KitKat ROM and the others as is from KitKat ROM.
This method worked for me on XT-1052.
ok thank u brother, could u explain step wise because i am beginner, flashing means using cmd or twrp?
proxuser said:
just download kk firmware you want and flash just system.img and boot.img then go to recovery and wipe data&cache.
i'm using 4.2.2 right now after i upgraded my xt1052 to 5.1 firmware. just flash system .img and boot.img via fastboot and wipe data&cache.
backup first!!!!!
Click to expand...
Click to collapse
Can I get a link to that 4.2.2 rom. Is it post camera update? Is it for GSM phone? Thanks
Sent from my XT1053 using XDA Forums Pro.
BrownDog99 said:
Can I get a link to that 4.2.2 rom. Is it post camera update? Is it for GSM phone? Thanks
Sent from my XT1053 using XDA Forums Pro.
Click to expand...
Click to collapse
you can use this archive of our Russian friends. there is a lot of rom's. some of them (look at unofficial folder) are installable via recovery.
https://cloud.mail.ru/public/64a43f0fcc1e/Moto_X/