Database Develop

[SBF] Gingerbread - 4.5.91 AT&T USA Only [SBF]

Official Gingerbread SBF release for AT&T
Android 2.3.4 --- Blur_Version.4.5.91.MB860.ATT.en.US
1FF-olympus-user-2.3.4-4.5.91-110625-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011.sbf.gz
http://www.filesonic.com/file/15073...signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011.sbf.gz
WARNING : FLASH THIS SBF ONLY IF YOU ARE STILL RUNNING STOCK AT&T 2.2.2 WITH A LOCKED BOOTLOADER. ONCE YOU FLASH THIS ANY ATTEMPT AT A DOWNGRADE TO A PREVIOUS VERSION WILL BRICK YOUR PHONE.
If you are running anything else using this could increase your chances of bricking. Read the thread before flashing !!!!
This SBF is intended for people who don't want to deal with rooting and unlocking and OTA's and blur removal and fastboot and recovery and blah, blah blah I'm going to brick my phone regardless of what I do stuff.
It's also meant for people who have patience and want to upgrade safely who don't want to deal with Motorola Software Update because of the OS they're running.
It's an original SBF plain and simple.
Compression MD5 - 37D7E7D002B921F98D47BAD85DB55532
SBF MD5 - 56721D893E43B814E95683A00B165555

Read eval-s post below to clear up the confusion.
Would not use if you've unlocked with pudding. Will probably soft brick or worse.
Locked phones should be safe.
http://forum.xda-developers.com/showthread.php?t=1138204 (see post #2) for an unlocked version (with root).

I am complete noob in atrix,But i want to know that i have unlocked my atrix but if i flash New Firmware GB,Will it make my atrix again locked plz tell me.

is this the final version?

If i flash back to 1.8.3 will it be locked again? And update to official from there

I dont know about this sbf, but the service sbf i got from the motorola software update tool worked fine with the leaked ota (which is apparently the same as the official ota) and i was unlocked before i flashed it
edit: the compressed md5sum from the op is the same as the one i got from the motorola server which i flashed via rsd 5.3.1 with an unlocked bootloader. so apparently it is a sirvice sbf
edit: i also flashed zomgunlock-lite.sbf after i flashed the sbf

So is it safe to update if ur unlocked already...is this update unlockable? Im currently rooted and bl unlocked....
Sent from my MB860 using XDA App

rjayflo said:
So is it safe to update if ur unlocked already...is this update unlockable? Im currently rooted and bl unlocked....
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Read the second post, or try and post your brick results!

I also recommend not using. I used the 4.5.91 SBF a long time ago and bricked my phone shortly thereafter.

No, this .sbf is safe. It will just burn your fuse, just like the OTA, and make downgrading to anything impossible. To downgrade, you will have to use something that includes pudding, and you will have to 'oem unlock' ...that's all.
The .sbf is no more unsafe than the OTA. And once you've OTA'd, if you see "Failed to boot 4" this .sbf is the ONLY thing you can flash if you want to stay locked. Basically, if you have even started the OTA process, or have ever flashed this .sbf, you burned a fuse in ReservedOdm and have only two types of .sbfs you can flash. This one, or any+Pudding. Only this one will let you stay locked and still boot.
If you flash anything with Pudding after the OTA and you are still locked, you will see 0x1000. But it will be a soft-brick, and then your only choice will be to:
a) 'fastboot oem unlock' to continue.
or
b) flash this .sbf instead, and stay locked.
An AT&T user should never see 0x1000 from flashing this .sbf.
But afterwards, downgrades are dangerous. 'Official' AT&T 4.5.91 users will hard-brick their phones with 0x1000, stuck in nvflash mode, if they ever try to use any .sbf except this one, or the very special non-motorola version of 1.8.3 (found in the Pudding thread) or Pudding itself. In the later case, you can still escape the 0x1000 by unlocking. If you flashed stock 1.8.3 or below after running GB 4.5.91 officially, your phone is a paperweight. Be warned.
the2dcour said:
Would not use if you've unlocked with pudding. Will probably soft brick or worse.
Locked phones should be safe.
http://forum.xda-developers.com/showthread.php?t=1138204 (see post #2) for an unlocked-safe version (with root).
Click to expand...
Click to collapse

Does this flash a new radio too?
Sent from my Atrix

martyotaku said:
Does this flash a new radio too?
Sent from my Atrix
Click to expand...
Click to collapse
Yes, it does, but its the same radio that has been available for awhile now.
Baseband version
N_01_77_30P
Sent from my MB860 using XDA App

Does this official update has differences from the leaked?
Fixed bugs/better battery life, etc..
If it does, will somebody make a safe cwm zip to install it?
(for unlocked users)
Sent from my MB860 using XDA App

Paschalis said:
Does this official update has differences from the leaked?
Fixed bugs/better battery life, etc..
If it does, will somebody make a safe cwm zip to install it?
(for unlocked users)
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
You already have 2.3.4 CWMs.

the2dcour said:
You already have 2.3.4 CWMs.
Click to expand...
Click to collapse
Yes, but these cwm`s were based on the leaked(beta?) att version.. Not on the official..
So I m asking, if the official(today's update) has improved battery life/performance etc?
Thanx!
Sent from my MB860 using XDA App

Paschalis said:
Yes, but these cwm`s were based on the leaked(beta?) att version.. Not on the official..
So I m asking, if the official(today's update) has improved battery life/performance etc?
Click to expand...
Click to collapse
As far as can be determined, the beta (from Moto dev servers) is the same as the "official" release now being pushed out.

so this include at&t stock GB kernel ( already posted by faux) and the well known .30P radio rigth?
Enviado desde mi MB860 usando XDA Premium App

eval- said:
The .sbf is no more unsafe than the OTA. And once you've OTA'd, if you see "Failed to boot 4" this .sbf is the ONLY thing you can flash if you want to stay locked. Basically, if you have even started the OTA process, or have ever flashed this .sbf, you burned a fuse in ReservedOdm and have only two .sbfs you can flash. This one, or 1.8.3+Pudding. Only this one will let you stay locked and still boot.
Click to expand...
Click to collapse
Eval, can you give us the path to cat eFuse status again and the comparison against which we can tell whether we've passed the point of no return with bootloaders? I would like to see where I'm at. Thanks.

So is this a service or full sbf for 4.5.91?

I am currently running locked and stock At&t 1.8.3. I want to update to this new OTA sbf. I read eval's post.
However, can someone confirm (break it down for me) that it is possible and probably safe to unlock the phone later using pudding or some other means. I am not an advanced user but will like to flash CM7 once its available.

Best way to root latest 5.1 pure edition OTA?

What are people doing to root the newest official 5.1 pure OTA? I saw a couple of threads about root floating around, but cf autoroot seems to have failed for a few people. What are you guys using to root?
Sent from my XT1095 using Tapatalk

Completing this question by adding one more bit that is there any root method which supports easy unrooting like Kitkat days where we don't have to go through hassles and risks of flashing whole stock ROM again?

I rooted 5.1 by booting twrp and flashing latest supersu. I haven't tried yet to full unroot but it should work.

Nicolae-Daniel said:
I rooted 5.1 by booting twrp and flashing latest supersu. I haven't tried yet to full unroot but it should work.
Click to expand...
Click to collapse
How did you boot twrp??,,, . Using windroid?
Sent from my XT1092 using XDA Free mobile app

rohithksaj said:
How did you boot twrp??,,, . Using windroid?
Sent from my XT1092 using XDA Free mobile app
Click to expand...
Click to collapse
Via fastboot. I just unrooted my device,although bootloader says "Software status : Modified" so i don't think it's safe to OTA update.

Be careful with this method though. Cause as of now there is no full image of 5.1. Therefore no stock recovery if you want to flash everything back like stock , unless you go back to 5.0 and then flash ota, hence the potential risk.

kristof95 said:
Be careful with this method though. Cause as of now there is no full image of 5.1. Therefore no stock recovery if you want to flash everything back like stock , unless you go back to 5.0 and then flash ota, hence the potential risk.
Click to expand...
Click to collapse
Yep. Kinda stuck as I didn't backup before rooting

Doesn't the factory reset convert the phone back into the stock? Like what used to happen in previous Android versions?

Jack Sparrow xda said:
Doesn't the factory reset convert the phone back into the stock? Like what used to happen in previous Android versions?
Click to expand...
Click to collapse
No, that's never been a thing. It only wipes /data and doesn't touch /system at all.
For that to work, they'd have to take up valuable phone space with system images.
As for root, getting it is virtually unchanged since 4.4.4. Use Cf-Auto-Root or let twrp do it.

Anybody tried re locking the boot loader.???
I tried every method but failed....
Sent from my XT1092 using XDA Free mobile app

rohithksaj said:
Anybody tried re locking the boot loader.???
I tried every method but failed....
Sent from my XT1092 using XDA Free mobile app
Click to expand...
Click to collapse
Can't be done.

rohithksaj said:
Anybody tried re locking the boot loader.???
I tried every method but failed....
Sent from my XT1092 using XDA Free mobile app
Click to expand...
Click to collapse
It's pointless to do. There is no valid reason to relock it.
Sent from my XT1095 using Tapatalk

the topic gone wrong, what is the best way to root latest ota? does cf-auto-root work?
since there is full image of latest 5.1 ota for pure edition, there are low risks of rooting.
any suggestion?

pro.gangster said:
the topic gone wrong, what is the best way to root latest ota? does cf-auto-root work?
since there is full image of latest 5.1 ota for pure edition, there are low risks of rooting.
any suggestion?
Click to expand...
Click to collapse
Just flash TWRP and root that way... If you don't want to overwrite the default recovery, boot TWRP. No real risks, it hasn't changed from 5.0.
Sent from my Moto X 2014 Pure Edition using Tapatalk

Unable to update AT&T Galaxy S5 to Lollipop on stock Touchwiz

I have an AT&T Galaxy S5 that has the default version of Touchwiz on it, with Android 4.4.2. I never rooted or flashed any roms on this device, yet I am unable to get OTA updates.
My friend, who has the same phone with AT&T, updated to Lollipop a while ago, and recently got another update, both of which I didn't get. Whenever I check for updates on my phone, under the About Device section in system settings, it says "Software Update Interrupted. No update is available for your device at this time. Please try again in 24 hours."
What can I do to update my device to Lollipop?
Thanks,
Sid

Do not update your phone with the OTA muniz_ri has all the files you need to flash your phone and keep root if you upgrade with the OTA you will be locked down and never able to root your phone. Just search ...
Sent from my GT-I9505 using XDA Free mobile app

robot_head said:
Do not update your phone with the OTA muniz_ri has all the files you need to flash your phone and keep root if you upgrade with the OTA you will be locked down and never able to root your phone. Just search ...
Sent from my GT-I9505 using XDA Free mobile app
Click to expand...
Click to collapse
Yeah I realized that Lollipop locks the boot loader and can't be rooted, but I didn't know where to get the rom.
Thanks for the info!
Sid

sidward35 said:
Yeah I realized that Lollipop locks the boot loader and can't be rooted, but I didn't know where to get the rom.
Thanks for the info!
Sid
Click to expand...
Click to collapse
Bootloader already locked, lollipop just prevents downgrade to root.
Rom and instructions in this thread.....
http://forum.xda-developers.com/showthread.php?t=3149146

Rom and instructions in this thread.....
http://forum.xda-developers.com/showthread.php?t=3149146
Click to expand...
Click to collapse
Thanks for the link! I'm not quite sure if I want to root yet, I think I'll just stick with 4.4.2 for now.
Sid

cricket firmware and OTA files

in case anyone needs these,here are the firmware and OTA files from the cricket variant.
signed firmware.zip can be flashed while s on if you lock the bootloader and do not modify it. they can be opened,modified and flashed if you are s off.
OTA files require you to be stock and using the correct,matching STOCK recovery.
for 1.11.506.1
1.11.506.1 firmware:
http://www.mediafire.com/download/qn9f29o9veboeia/firmware-A11_UL-1.11.506.1.zip
OTA file,from 1.10.506.1 to 1.11.506.1:
https://www.mediafire.com/?oqsv6jwfvdzus0r
___________________________________________________________________________________________
for 1.11.506.5:
1.11.506.5 firmware:
http://www.mediafire.com/download/3qwcq9noaeclf32/firmware.zip
1.11.506.1 to 1.11.506.5 OTA file:
http://www.mediafire.com/download/2...US_1.11.506.5-1.11.506.1_R_release_448993.zip
___________________________________________________________________________________________
for 1.11.506.8:
1.11.506.8 firmware:
http://www.mediafire.com/download/wqc56c75723kmvv/firmware-A11_UL-1.11.506.8.zip
1.11.506.5 to 1.11.506.8 OTA file:
http://www.mediafire.com/download/w...s_US_1.11.506.8-1.11.506.5_release_452145.zip

Any word on rooting this update? Will the same method for the last FW version work?

HampTheToker said:
Any word on rooting this update? Will the same method for the last FW version work?
Click to expand...
Click to collapse
Yes, the same method will work!

HampTheToker said:
Any word on rooting this update? Will the same method for the last FW version work?
Click to expand...
Click to collapse
This is the current firmware,not a forthcoming update. I didn't see these files posted when looking for resources for this device and wanted to put them up in case they are ever needed.
Sent from my HTC One using Tapatalk

scotty1223 said:
This is the current firmware,not a forthcoming update. I didn't see these files posted when looking for resources for this device and wanted to put them up in case they are ever needed.
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Well, I hadn't checked if there was a newer kernel in the update that might break root and prevent using the current one on newer FW. It all worked out perfectly, though. Much appreciated.

added firmware and OTA files for 1.11.506.5

added firmware and OTA files for 1.11.506.8

help me !how to flash htc dsire 510 which stuck on logo

Hey I really appreciate the firmware updates for cricket first of all....but I am having a problem, I did use the unlock.bin to unlock bootloader on device the proper way through the htc site. but now when i get an ota it will not install i am getting error that says Livewallpapers.apk has bad contents or whatever, anyone know how i can fix this so i can actually get updates to install everything is stock and nonroot right now so it should work i would think but for some unknown reason the livewallpapers system app is throwing the error.

toxinburn said:
Hey I really appreciate the firmware updates for cricket first of all....but I am having a problem, I did use the unlock.bin to unlock bootloader on device the proper way through the htc site. but now when i get an ota it will not install i am getting error that says Livewallpapers.apk has bad contents or whatever, anyone know how i can fix this so i can actually get updates to install everything is stock and nonroot right now so it should work i would think but for some unknown reason the livewallpapers system app is throwing the error.
Click to expand...
Click to collapse
What build number are you on? Best thing would be to restore an unmolested boot and system.
Sent from my Nexus 9 using Tapatalk

Hey check this htc 510 flash file it worked for me
https://www.technicalparivar.com/htc-desire-510-flash-file-stock-firmware/

htc desire 510
[IMG="https://mega.nz/fm/yZZlCKSY"]
https://mega.nz/fm/yZZlCKSY[/IMG]
how to fix bro

Maybe someone have full firmware for Desire 510 Cricket 1.11.506.8 ?

Moto X 2014 (XT1097 Canada) Wont Boot

Please help, my moto x 2014 wont boot what so ever. This first started from when I tried to root my XT1097 on android 5.1 using this: http://forum.xda-developers.com/mot...e-edition-superboot-style-root-motox-t2889264 not realizing it wasn't for android 5.1. Then it was acting weird so I booted into fastboot and used a factory image which was for AT&T devices. Realizing this was the wrong image (No service or wifi what so ever) I flashed the proper image to return to stock, but now my device simply sits at the M logo and wont boot. Any help to get this device back up and running is appreciated!

Kevin_Desousa said:
Please help, my moto x 2014 wont boot what so ever. This first started from when I tried to root my XT1097 on android 5.1 using this: http://forum.xda-developers.com/mot...e-edition-superboot-style-root-motox-t2889264 not realizing it wasn't for android 5.1. Then it was acting weird so I booted into fastboot and used a factory image which was for AT&T devices. Realizing this was the wrong image (No service or wifi what so ever) I flashed the proper image to return to stock, but now my device simply sits at the M logo and wont boot. Any help to get this device back up and running is appreciated!
Click to expand...
Click to collapse
Did you wipe data/factory reset when you reflashed your firmware?
Sent from my XT1095 using Tapatalk

xKroniK13x said:
Did you wipe data/factory reset when you reflashed your firmware?
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Yep, I wiped them both as per usual. If it helps, I can still access fastboot and recovery.

If it is sticking at the M, its failing to boot Android at all. Does it roll into recovery automatically? Which firmware did you flash? Also, was the version flashed older than the one you previously had?
Sent from my XT1095 using Tapatalk

xKroniK13x said:
If it is sticking at the M, its failing to boot Android at all. Does it roll into recovery automatically? Which firmware did you flash? Also, was the version flashed older than the one you previously had?
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
It doesn't seem to roll into recovery automatically. I flashed this initially : VICTARA_ATT_5.0.2_LXE22.46-34 (AT&T zip), and then I flashed this one: RETCA_XT1097_5.0.1_LXE22.46-22. I forgot which version I had before I tried rooting, but I do know it was android 5.1.

Kevin_Desousa said:
It doesn't seem to roll into recovery automatically. I flashed this initially : VICTARA_ATT_5.0.2_LXE22.46-34 (AT&T zip), and then I flashed this one: RETCA_XT1097_5.0.1_LXE22.46-22
Click to expand...
Click to collapse
Is your bootloader unlocked? If you went to the 5.0.2 AT&T and your bootloader is locked, you won't be able to downgrade back to 5.0.1. Try getting a firmware that is the same version or newer.
Sent from my XT1095 using Tapatalk

xKroniK13x said:
Is your bootloader unlocked? If you went to the 5.0.2 AT&T and your bootloader is locked, you won't be able to downgrade back to 5.0.1. Try getting a firmware that is the same version or newer.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
My bootloader is unlocked, and when I say that I'm stuck at the M, I mean I'm stuck at the bootloader warning. (I didn't know what to call it)

Kevin_Desousa said:
My bootloader is unlocked, and when I say that I'm stuck at the M, I mean I'm stuck at the bootloader warning. (I didn't know what to call it)
Click to expand...
Click to collapse
Yeah, that's where I figured it was hanging. All signs just point to a bad flash/firmware. I'd try downloading a different version (even 5.1 since you're unlocked) or verifying the hash on the firmware you flashed. You can use HashMyFiles to check the md5 or SHA hashes.
Sent from my XT1095 using Tapatalk

xKroniK13x said:
Yeah, that's where I figured it was hanging. All signs just point to a bad flash/firmware. I'd try downloading a different version (even 5.1 since you're unlocked) or verifying the hash on the firmware you flashed. You can use HashMyFiles to check the md5 or SHA hashes.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Would you know of a place where I can obtain the factory images then? The one I was using only had a couple of them, none of which were 5.1

Kevin_Desousa said:
Would you know of a place where I can obtain the factory images then? The one I was using only had a couple of them, none of which were 5.1
Click to expand...
Click to collapse
This thread has a link that has the 5.1 firmwares. You have to do some digging, but they should be there... http://forum.xda-developers.com/showthread.php?t=3148211
Sent from my XT1095 using Tapatalk

xKroniK13x said:
This thread has a link that has the 5.1 firmwares. You have to do some digging, but they should be there... http://forum.xda-developers.com/showthread.php?t=3148211
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Sorry to be such a pain, but would you have flash instructions for the official firmware? I'm just afraid of messing something up

Kevin_Desousa said:
Sorry to be such a pain, but would you have flash instructions for the official firmware? I'm just afraid of messing something up [emoji14]
Click to expand...
Click to collapse
I am personally a huge fan of House of Moto, it will generate automatic scripts to flash the firmware for you. Check out the thread here: http://www.droidrzr.com/index.php?/topic/61124-House-of-Moto-[4.3]
Also, MotoFirmware has some firmwares for the X2, I used to use them for my RAZR M. http://motofirmware.center/files/category/46-moto-x-2nd-generation/
Sent from my XT1095 using Tapatalk

xKroniK13x said:
I am personally a huge fan of House of Moto, it will generate automatic scripts to flash the firmware for you. Check out the thread here: http://www.droidrzr.com/index.php?/topic/61124-House-of-Moto-[4.3]
Also, MotoFirmware has some firmwares for the X2, I used to use them for my RAZR M. http://motofirmware.center/files/category/46-moto-x-2nd-generation/
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
I tried to use the House of Moto with this firmware: http://motofirmware.center/files/file/249-victara_tmo_51_lpe2332-213_cid9_cfcxmlzip/ but when I load it into the HOM it displays this: "Custom recovery not found.
Using factory image: VICTARA_TMO_5.1_LPE23.32-21.3_cid9_CFC.xml.zip
ERROR: XML script not found in this factory image. This is not yet supported."

Kevin_Desousa said:
I tried to use the House of Moto with this firmware: http://motofirmware.center/files/file/249-victara_tmo_51_lpe2332-213_cid9_cfcxmlzip/ but when I load it into the HOM it displays this: "Custom recovery not found.
Using factory image: VICTARA_TMO_5.1_LPE23.32-21.3_cid9_CFC.xml.zip
ERROR: XML script not found in this factory image. This is not yet supported."
Click to expand...
Click to collapse
That firmware looks like the one for xt1095/T-Mobile/Pure Edition. Also, that error sounds like the HoM instructions weren't followed right. I've flashed my device a bunch with HoM.
Sent from my XT1095 using Tapatalk

xKroniK13x said:
That firmware looks like the one for xt1095/T-Mobile/Pure Edition. Also, that error sounds like the HoM instructions weren't followed right. I've flashed my device a bunch with HoM.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Would this one work: VICTARA_NIIBR_XT1097_5.1_LPE23.32-14.2_cid12_CFC.xml.zip? I'm just confused with the "NIIBR" in the firmware name.

Kevin_Desousa said:
Would this one work: VICTARA_NIIBR_XT1097_5.1_LPE23.32-14.2_cid12_CFC.xml.zip? I'm just confused with the "NIIBR" in the firmware name.
Click to expand...
Click to collapse
I'm not sure, to be honest.
Sent from my XT1095 using Tapatalk

xKroniK13x said:
I'm not sure, to be honest.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
So the phone booted up, thank you so much for the help, but for some reason it wont detect my sim card, the wifi doesnt work on it, and it occasionally reboots. I also noticed that the baseband version is unknown. Is there a way to fix this?

Kevin_Desousa said:
So the phone booted up, thank you so much for the help, but for some reason it wont detect my sim card, the wifi doesnt work on it, and it occasionally reboots. I also noticed that the baseband version is unknown. Is there a way to fix this?
Click to expand...
Click to collapse
Sounds like whatever firmware you flashed had the wrong radios. You should be able to download the Canadian firmware and just flash the radios.
Sent from my XT1095 using Tapatalk

xKroniK13x said:
Sounds like whatever firmware you flashed had the wrong radios. You should be able to download the Canadian firmware and just flash the radios.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
I did flash the Canadian firmware to my knowledge. RETCA_XT1097_5.0.1_LXE22.46-22_cid14_CFC.xml?

I was browsing the xda threads and saw this thread: http://forum.xda-developers.com/moto-x-2014/general/guide-xt1097-to-xt1095-nextel-t2972693 where it states: "IMPORTANT. From 5.1 update, the modems included on the update are FULLY compatible with all models, XT1097, 1092 and 1093 and all carriers ,so, you don't have to worry about losing IMEI, signal or data." So, should I be able to flash the brazilian xt1097 firmware and have the proper radios installed from this thread: http://forum.xda-developers.com/moto-x-2014/general/ota-android-marshmallow-6-0-final-t3248315 ?