Related
Hi all, I've been trying to get back to my original firmware for the past 4 hrs now ans its driving me crazy.!
I've been using Odin3 v1.70 (recovery mode) and I downloaded my original rom from here http://forum.xda-developers.com/showthread.php?t=846913
I9000XXJPO|2.2|2010 October
I just cant seem to get it right, it doesnt want to boot and i'm constantly stuck with the Samsung logo on boot up and nothing else.
I've changed pit sizes, different roms (I9000XWJM8|2.1|2010) I think i'm go mental. Please can somebody help me return my phone back to stock.
Thankyou for reading
Please believe me, Ive searched until I'm blind on how to do this but I can't seem to get it sorted out.
Can anyone help please??
Ok here goes... This is my first thread post here but I am in serious need of help.
I have searched and searched the forums for a hopeful answer but I have found it difficult to find the answer I seek.
So here is the story:
Bought a GT second hand from Akihabara in Japan which was locked to NTT DoCoMo. I was using it as a WIFI only Tab and all was wonderful till my IT brain decided it could be better and I began to tinker.
I had been looking around for a way to make my Australian Virgin Mobile SIM to work on the tab and found a lot of good answers but nothing that would make it work.
I then had the brilliant idea to change the firmware with a European firmware so I could get all the features enabled from a fresh start. Which is where it all went wrong.
I first tried to flash the tab using Odin 1.7 with the P1000XXJK5 euro firmware from samfirmware.com
This failed and left my tab with the picture of a phone and a pc with a dotted line and in between them an exclamation point in a triangle.
After a lot of fiddling (I dont remember what I did but I managed to get rid of that screen had something to do with retrying the flash and it was very late last night at this point) I managed to try again but Odin just kept failing on running the updated firmware.
I then decided that it would be a good idea to run the Rotohammer firmware by following the instructions on this thread:
http://forum.xda-developers.com/showthread.php?t=895827&highlight=sc-01c
This is where I once again received errors from Odin and now my tab is somewhat bricked.
I tried reflashing but same errors every time. (I currently dont have the errors from Odin but I will update my post when I get home)
I can still get to the downloading screen (Yellow triangle with the Android digging) so I am hopeful all is not lost.
So now you have heard my sob story I will ask two questions....
1. Has anyone actually successfully flashed a Japanese model Tab?
2. My only thought/hope at the moment can anyone direct me to an original NTT DoCoMo firmware so I can at least go back to having WIFI only Tab?
Thanks in advance if you can help
Alex
Yes , i suggest you to wait until you get a right firmware for it !
That would probably work if the partitions are a match !
What is this model called btw ?
"NTT DoCoMo Japanese Tab" or there is any model ? such as M180 for korean , P1000 , P100 Sprint , I800 Verizon , etc..
Br
Oz
I am searching the an original NTT DoCoMo firmware.
Electroboy said:
Yes , i suggest you to wait until you get a right firmware for it !
That would probably work if the partitions are a match !
What is this model called btw ?
"NTT DoCoMo Japanese Tab" or there is any model ? such as M180 for korean , P1000 , P100 Sprint , I800 Verizon , etc..
Br
Oz
Click to expand...
Click to collapse
Oz the model is SC-01C it has a build date of 2010/12
I was thinking considering I can get into the build/download screen maybe trying an emergency firmware recovery using Kies.
Hi,
I'm a fellow SC01 owner. You can get a backup of the stock firmware here: http://www.megaupload.com/?d=OJAK2UZF
Firmware code is SC01COMJK2
I believe there are newer firmwares (which I haven't installed as some of them contain a new bootloader that only allows for signed firmwares, same as the international units) that I have seen mentioned on various Japanese blogs. Let me know if you want me to try to hunt any down for you.
As for my SC01, I installed the custom kernel by koxudaxi and it's working great. Mind you, I've only changed to this kernel and apart from that am running the stock OS. I got his kernel here which can overclock to 1.4GHz: http://koxudaxi.sakura.ne.jp/
The kernel I installed via Heindall is zImage_ntt_2. It looks like he's built a newer version though, I might check that out. I think what you might want to do, is in download mode try to restore the above backup to your unit. Look up the Roto Backup thread to see how to do this. Hopefully since you can get download mode, all is not lost. I personally think it's quite crummy that there are different hardware versions like this which aren't interchangeable though >_<
I'm going to give the original firmware a go today at lunch time and I will let you know how I go. Thanks anyways for the link if all goes well I'll look at possibly trying the the koxudaxi kernel.
UPDATE: Well I'm not having luck getting the firmware to flash to my tab I keep getting "Failed to retrieve config Descriptor" when trying to flash. I will keep plugging away.
UPDATE: Still getting the same problems using heimdall to flash the tab. Any suggestions as to what I could do next?
Recovering a Docomo Tab
I'm currently running Overcome v1.1.3 ROM and richardtrip's V15 kernel on my SC-01C.
acont said:
UPDATE: Well I'm not having luck getting the firmware to flash to my tab I keep getting "Failed to retrieve config Descriptor" when trying to flash. I will keep plugging away.
Click to expand...
Click to collapse
You're getting this error from Heimdall, right? Have you tried Odin 1.7?
Here's how I recovered my Tab using Odin:
1. Following the instructions in http://forum.xda-developers.com/showthread.php?t=895827, specify the P1_add_hidden.pit in the PIT button and select Re-Partition.
2. Specify the stock Docomo ROM when pressing the PDA button.
3. Ignore the Phone and CSC buttons, as the stock ROM already contain these items.
You should be able to restore your Tab to stock settings using this procedure.
If this doesn't work, you might want to check if the USB connection to your PC is ok, and if everything necessary to run Odin is installed on your PC.
Bugger!
Well thanks for your help all of you but I think I have just made matters worse.
Last night I had success in flashing the original docomo firmware provided to me by zetsurin but I think I shouldn't have included the boot images.
Unfortunately I think it is completely bricked now it now wont turn on and when plugged into power (thinking that the battery had died) it just comes up with a white screen.
I can't boot into download mode and I can hold down the power button till I turn blue in the face... So as Bones would say "It's dead Jim"
Unless any of you have anything else I could try as a last ditch shot I might just have to ship it back to Japan and get them to fix it or maybe try Samsung here in Oz.
Serves me right
Thanks again.
acont said:
Last night I had success in flashing the original docomo firmware provided to me by zetsurin but I think I shouldn't have included the boot images.
Click to expand...
Click to collapse
What exactly happened?
The SC01COMJK2 firmware does not contain protected bootloaders, by the way.
acont said:
Unfortunately I think it is completely bricked now it now wont turn on and when plugged into power (thinking that the battery had died) it just comes up with a white screen.
Click to expand...
Click to collapse
I've heard about this happening when the battery runs out. Try connecting the Tab to your PC (not your AC adapter) and let it trickle-charge for an hour or so. If successful, you should see the download screen.
fury1sog unfortunately that didnt work
spoke to the samsung repairers here in Aus and they said they can take a look at it for me hopefully bring life back into my unit and then I will never touch it again
Any thoughts?
Hopefully this post is still being looked at but has anyone got any ideas as to what I could do before I fork out $374 to my tab repaired by Samsung Australia?
According to the repair guys its a faulty board (not an idiot that tried to flash it) and needs to be replaced. Not sure if this is worth my trouble considering I could buy a brand new tab for $599.
There is a positive out of this, the MB will be an Australian MB and I will have a working "Australian" tab instead of the Japanese version.
Considering the unfortunate tragedy in Japan I am not sure I should try and get my friend in Japan to fix it for me.
Thoughts anyone?
I know someone who can unlock it, I have mine unlocked by them.
I was afraid of flashing it myself so I paid to have it unlocked, cost was $20.
I think you better go for the MB replacement, it's cheaper.
For what it's worth, I went to reset my tab to factory using a rotohammer backup I made when I first bought it, and got stuck in a boot loop. So I then used ODIN. Still got a boot loop. Then I tried ODIN repartition... it hung for hours. Knowing the thing was likely bricked I pulled the plug and now I am in the situation as you: I have a crappy icon of a phone + an exclamation + computer image. Dead.
I think the best thing I can do for this junk is to toss it unceremoniously in the bin. Fortunately I also have an iPad which has resumed full-time service.
EDIT: Some signs of hope in here: http://forum.xda-developers.com/showthread.php?t=903257
Try "heimdall close-pc-screen" to see if your tab can get kicked back into the boot loop at least. Mine has failed a repartition, but I can still get it into the boot loop, which is a start. Will experiment over the weekend.
EDIT 2: Well my tab is back up and runing. I reflashed my original roto backup using ODIN with repartition on, then I went into recovery and did a factory restore. Back up like stock now. I think I'm going to sell it though, since it's been badly dis-owned by Samsung.
zetsurin said:
Hi,
I'm a fellow SC01 owner. You can get a backup of the stock firmware here: http://www.megaupload.com/?d=OJAK2UZF
Firmware code is SC01COMJK2
I believe there are newer firmwares (which I haven't installed as some of them contain a new bootloader that only allows for signed firmwares, same as the international units) that I have seen mentioned on various Japanese blogs. Let me know if you want me to try to hunt any down for you.
As for my SC01, I installed the custom kernel by koxudaxi and it's working great. Mind you, I've only changed to this kernel and apart from that am running the stock OS. I got his kernel here which can overclock to 1.4GHz: http://koxudaxi.sakura.ne.jp/
The kernel I installed via Heindall is zImage_ntt_2. It looks like he's built a newer version though, I might check that out. I think what you might want to do, is in download mode try to restore the above backup to your unit. Look up the Roto Backup thread to see how to do this. Hopefully since you can get download mode, all is not lost. I personally think it's quite crummy that there are different hardware versions like this which aren't interchangeable though >_<
Click to expand...
Click to collapse
hi zetsurin!
thanks for teaching me how to unlock the tab.
problem now is, im not able to successfully flash any rom. keeps saying write fail, using odin.
stuck at docomo logo when rebooted.
need help.
also used heimdall. starts downloading. but stuck almost at the end of the tab's progress bar.
argh...
me too ! samsung galaxy tab m180 Korean .... huhu
What ROM is best for a SC-01C?
Hi Guys
I picked up a 2nd hand SC-01C from Yahoo Auction, and am wondering what the best ROM to use with it is...
Looks like this guy has got an Overcome ROM on it OK, (http://chaki-ramone.blogspot.com/2011/06/galaxytabsc-01cgingerbreadromovercome.html), so I wonder if the latest version (http://forum.xda-developers.com/showthread.php?t=1205990) will work OK - anyone tried? (is the SC-01C a GSM-based model??)
I'm not going to use a SIM with it, so I'm not bothered about unlocking - but just want it rooted & want a good balance between speed & battery life. If you were going from scratch with an SC-01C, what would you do? Any suggestions greatfully received!
Thanks in advance?
PS - I'm an iPhone / iPad / Ideos 8150 / Notion Ink Adam owner, all jailbroken / rooted. So I'm not scared about rooting per-se, just worried about trying something that will not work because of anything docomo has done to the Tab!
Acont you could be coma bricked try pluginging it into THE MAINS for at least 4 hours if nothing come up your hard bricked.
Sent from my GT-P1000 using XDA Premium App
zetsurin said:
For what it's worth, I went to reset my tab to factory using a rotohammer backup I made when I first bought it, and got stuck in a boot loop. So I then used ODIN. Still got a boot loop. Then I tried ODIN repartition... it hung for hours. Knowing the thing was likely bricked I pulled the plug and now I am in the situation as you: I have a crappy icon of a phone + an exclamation + computer image. Dead.
I think the best thing I can do for this junk is to toss it unceremoniously in the bin. Fortunately I also have an iPad which has resumed full-time service.
EDIT: Some signs of hope in here: http://forum.xda-developers.com/showthread.php?t=903257
Try "heimdall close-pc-screen" to see if your tab can get kicked back into the boot loop at least. Mine has failed a repartition, but I can still get it into the boot loop, which is a start. Will experiment over the weekend.
EDIT 2: Well my tab is back up and runing. I reflashed my original roto backup using ODIN with repartition on, then I went into recovery and did a factory restore. Back up like stock now. I think I'm going to sell it though, since it's been badly dis-owned by Samsung.
Click to expand...
Click to collapse
Can anyone pls help,, my galaxy tab 7inch gt-p1000r is stuck on phone+pc logo, can't go to download mode, can't go to recovery mode,, can't do anything,, pls someone help me,, I am desperate..
huylang280285 said:
me too ! samsung galaxy tab m180 Korean .... huhu
Click to expand...
Click to collapse
unbricking M180 is done long time ago
Here is a video for you
http://www.ort-jtag.com/blog/?e=15
udhtari said:
Can anyone pls help,, my galaxy tab 7inch gt-p1000r is stuck on phone+pc logo, can't go to download mode, can't go to recovery mode,, can't do anything,, pls someone help me,, I am desperate..
Click to expand...
Click to collapse
What about this P1000R , what is special or different ?
I know P1000L was for south american edition !
lemmy_0 said:
hi zetsurin!
thanks for teaching me how to unlock the tab.
problem now is, im not able to successfully flash any rom. keeps saying write fail, using odin.
stuck at docomo logo when rebooted.
need help.
Click to expand...
Click to collapse
Docomo solution is very soon !
That TAB need JTAGging thats the only way ..
I have the good and dead device in hand , we will release for ORT-JTAG probably this week ..
Best Regards
Oz.
Hi all!,
Im new on these forums, i just got my tab today for xmas!, and i managed to soft brick it!, i can get into the downloading bit of the recovery, and i have got odin. Ive been following the how to recover guide here http://forum.xda-developers.com/showthread.php?t=1133590, but it took me ages to find the firmware for my tab, can only get an asian one of samsfirmware, but in the end tried to use this one http://forum.xda-developers.com/showthread.php?t=1315364 but I have had no luck, odin just crashes everytime i press start!. I live in the UK, but bought my tab in the US as it was quite a bit cheaper than it was over here.
Sorry if it sounds all muddeled, but i just want to get it fixed!
Any help?
Thanks!
TwinCalibre said:
Hi all!,
Im new on these forums, i just got my tab today for xmas!, and i managed to soft brick it!, i can get into the downloading bit of the recovery, and i have got odin. Ive been following the how to recover guide here http://forum.xda-developers.com/showthread.php?t=1133590, but it took me ages to find the firmware for my tab, can only get an asian one of samsfirmware, but in the end tried to use this one http://forum.xda-developers.com/showthread.php?t=1315364 but I have had no luck, odin just crashes everytime i press start!. I live in the UK, but bought my tab in the US as it was quite a bit cheaper than it was over here.
Sorry if it sounds all muddeled, but i just want to get it fixed!
Any help?
Thanks!
Click to expand...
Click to collapse
Did you install the drivers? Does Odin find your tab?
EDIT: this http://forum.xda-developers.com/showthread.php?t=1315364 is CWM flashable firmware, you can't flash this with Odin!
Yeah it finds it, and i ahve the drivers installed, ahh how stupid of me lol, well atm im downloading the asian firmware from samsfirmware, which i will try to use, and then I will flash it with http://forum.xda-developers.com/showthread.php?t=1315364, will this work? or am i being stupid again?
Thanks for the help!
How did you brick it in the first place? What did you try to do?
If you are in Europe, why not just flash European firmware on it?
I tried to install the clock work recovery app, which when i ran crashed my tab, and it was stuck in the intro loops. I can get into the odin download mode as i said before, but thats it. Thats a fair point, but i cant find the european firmware, would much appreciate it if you could link it to me!
Thanks
TwinCalibre said:
I tried to install the clock work recovery app, which when i ran crashed my tab, and it was stuck in the intro loops. I can get into the odin download mode as i said before, but thats it. Thats a fair point, but i cant find the european firmware, would much appreciate it if you could link it to me!
Thanks
Click to expand...
Click to collapse
You have a WIFI only GT8.9 (P7310), correct?
http://www.hotfile.com/dl/135410941/a028c7d/P7310XXKJ4_P7310XEUKJ4_XEU.zip.html < this should work.
Check out this guide on how to use Odin > http://forum.xda-developers.com/showthread.php?t=1406137
Thankyou very much, that asian firmware actually worked in the end, worked when i tried a newer version of odin, so I should just do the same with this rom through odin with the one u linked? so i have european firmware?. Now i have a better understanding of it all, through learning the hard way , I was thinking of using the http://forum.xda-developers.com/showthread.php?t=1321142 rom, with this kernel http://forum.xda-developers.com/showthread.php?t=1344330, is that ok?
Thanks again for all your help!
TwinCalibre said:
Thankyou very much, that asian firmware actually worked in the end, worked when i tried a newer version of odin, so I should just do the same with this rom through odin with the one u linked? so i have european firmware?. Now i have a better understanding of it all, through learning the hard way , I was thinking of using the http://forum.xda-developers.com/showthread.php?t=1321142 rom, with this kernel http://forum.xda-developers.com/showthread.php?t=1344330, is that ok?
Thanks again for all your help!
Click to expand...
Click to collapse
Yes, it should work. Just make sure you download the correct files for your device.
Hi
i can borrow this tread.
I just rooted my gtab 8.9 wifi (eu)and all just fine and i install superuser and got well this time too...then i install clockwork mode and install drivers for CWM 4.0 bla bla work fine...then when i try to put tab in recovery mode goes wrong only black screen..I have tried to put tab in download mode and recovery manually Still nothing happens...only what happened is my tab going in loop to logo and again and again.
Have tried put on download mode but still black and odin don't find it.(after 5 sec in download mode then beginning looping)
Have tried put on recovery mod but still black screen and beginning looping after 5 sec.
So what to do folks? Need badly help here plz!!!
This tread i bin used to root:
http://forum.xda-developers.com/showthread.php?t=1287205
Edit: After trying and trying i made it download mode and flash off kernel and now is working
same problem
hi, I just had the same problem, I downloaded the file from hotfile, but when I try to open it with winrar it say that theres a password, anyone know which is the password please???
Samfirmware.com
Hey XDA guys,
I've got an I8190N
I've got a pretty big problems and I need the help of your big brains.
Well a long time ago (17th September 2013) I posted a thread about a problem with my phone, when I booted up, it had this screen:
*Image should either be here or in the attached thumbnails*
So about 3 weeks ago from today I was trying to install a new CM11 ROM update from Maclaw but after I put the zip on my sd card and booted into TWRP recovery (2.6.3.0, just in case it needs mentioning), the phone shut off in the middle of the installation, I thought it was just the usual bugs I get whilst flashing ROMs so I tried to turn it on and it wouldn't turn on.
After a couple of attempts I finally realised that it's able to go into download mode only, I think that means it's soft-bricked right?
So I kept trying to re-install the stock ROM (unroot, unbrick etc) through odin but it kept failing.
I sent the phone to repairs and they wouldn't repair it (because it's rooted obviously, I thought maybe they wouldn't know but of course they did).
I obviously can't get a replacement and start over again because the warranty is void now that I've rooted it
So now they've sent it back and it's currently a paper weight that can go into download mode and refuses to install stock ROMs through Odin.
What do I do? I really need help guys (I don't need to worry about backups because I always backup)
Please answer soon, otherwise I'll be without a phone and my phone company will keep charging me for my contract eventhough I'm not using the phone.
Thanks in advance for any help given
LordwinOfficial said:
Hey XDA guys,
I've got an I8190N
I've got a pretty big problems and I need the help of your big brains.
Well a long time ago (17th September 2013) I posted a thread about a problem with my phone, when I booted up, it had this screen:
*Image should either be here or in the attached thumbnails*
So about 3 weeks ago from today I was trying to install a new CM11 ROM update from Maclaw but after I put the zip on my sd card and booted into TWRP recovery (2.6.3.0, just in case it needs mentioning), the phone shut off in the middle of the installation, I thought it was just the usual bugs I get whilst flashing ROMs so I tried to turn it on and it wouldn't turn on.
After a couple of attempts I finally realised that it's able to go into download mode only, I think that means it's soft-bricked right?
So I kept trying to re-install the stock ROM (unroot, unbrick etc) through odin but it kept failing.
I sent the phone to repairs and they wouldn't repair it (because it's rooted obviously, I thought maybe they wouldn't know but of course they did).
I obviously can't get a replacement and start over again because the warranty is void now that I've rooted it
So now they've sent it back and it's currently a paper weight that can go into download mode and refuses to install stock ROMs through Odin.
What do I do? I really need help guys (I don't need to worry about backups because I always backup)
Please answer soon, otherwise I'll be without a phone and my phone company will keep charging me for my contract eventhough I'm not using the phone.
Thanks in advance for any help given
Click to expand...
Click to collapse
I believe that kies has emergency firmware that you can use to revive your phone? Try that. What does it say when it fails in odin?
hello,
so you can still go into download modus?
try the latest recovery (2.7 if i'm correct...) and flash with odin.
then try to boot into recovery and reflash the latest mclaw (or any other) non stock firmware.
think about it that you have to unzip the odin firmware package you download from maclaws site ( i forgot it and got messing around 2hours ago.... also staring at the erro in odin and thinking W*F is happening :cyclops: but then i realized i need to unzip the package...
realy good luck.....
Hi
Odin flash pit file
It just says the big black FAIL in the red background where it's supposed to be PASS in the green background
Could you guys give me download links to the PIT files, TWRP and the firmwares so I could get the right ones please?
Thanks
LOOK HERE
(i8190_goldenxx.zip) is the pitfile for I8190 only and i8190N_goldenxx.zip for I8190N version
BUT: these are NO flashable files - extract them and choose xxx.pit in Odin.
MJ
Could you give me a link to the pit file please
Do you have a link to the firmware I should use because tys0n gave me one before which was the service firmware (like 1.29gb) but it wouldn't work for this problem
LordwinOfficial said:
Do you have a link to the firmware I should use because tys0n gave me one before which was the service firmware (like 1.29gb) but it wouldn't work for this problem
Click to expand...
Click to collapse
come on boy, it´s really easy to find it, but ok, it´s friday and weekend comes ...
Firmware
Look at the attached files in that post
to flash a pre-rooted, deodexed and zipaligned ROM try this one
MJ
LordwinOfficial said:
Hey XDA guys,
I've got an I8190N
I've got a pretty big problems and I need the help of your big brains.
Well a long time ago (17th September 2013) I posted a thread about a problem with my phone, when I booted up, it had this screen:
*Image should either be here or in the attached thumbnails*
So about 3 weeks ago from today I was trying to install a new CM11 ROM update from Maclaw but after I put the zip on my sd card and booted into TWRP recovery (2.6.3.0, just in case it needs mentioning), the phone shut off in the middle of the installation, I thought it was just the usual bugs I get whilst flashing ROMs so I tried to turn it on and it wouldn't turn on.
After a couple of attempts I finally realised that it's able to go into download mode only, I think that means it's soft-bricked right?
So I kept trying to re-install the stock ROM (unroot, unbrick etc) through odin but it kept failing.
I sent the phone to repairs and they wouldn't repair it (because it's rooted obviously, I thought maybe they wouldn't know but of course they did).
I obviously can't get a replacement and start over again because the warranty is void now that I've rooted it
So now they've sent it back and it's currently a paper weight that can go into download mode and refuses to install stock ROMs through Odin.
What do I do? I really need help guys (I don't need to worry about backups because I always backup)
Please answer soon, otherwise I'll be without a phone and my phone company will keep charging me for my contract eventhough I'm not using the phone.
Thanks in advance for any help given
Click to expand...
Click to collapse
You can go to recovery mode then by using three button combo
if its no working flash it from here using odin
Sorry, it's just not my day, phone breaks, gf breaks up with me because I didn't reply to her because my phone broke lol just ain't able to fix my phone myself like usual, I got a USB jig on the side just in case I need it if that'll be of any help? & Thanks for the links, appreciate the help
Fixed
Thanks guys, the phones fixed
Really appreciate all the help
Good evening from Indonesia guys, okay i've post my problem here before, this is my last post about my problem http://forum.xda-developers.com/showthread.php?t=2768357 , it's about 2 years ago, and now i'm still working hard to find the way how to unbrick my Gnote, i've tried so many way on Google, but there is no result again (like 2 years ago), okay guys, i'm give up for 1 years about my problem, but now i think there is still a way for me to unbrick my Gnote, can you guys help me??
My Gnote problem :
My Gnote stuck on "Samsung Galaxy Note GT-N7000" logo
I've back up my data using Clockworkmod (CWM Recovery) before it's bricked, and i have a copy on my Laptop
I can go to Download Mode
I Can't go to Recovery Mode, my recovery mode was TWRP
When i go to Recovery Mode, its stuck in "TEAMWIN" logo
I can charge my Gnote
My Gnote was unidentified on Samsung Kies
But my Gnote still can be read on Odin or Heimdall
I hope you guys tell me what i have to do to resolve this phone, and give me a solution for my Gnote problem, i know its too late, and you guys asking me about why i don't buy another one after its bricked for 2 years? its because my Gnote was my dad's present when i got a scholarship on junior high school, and i'm so appreciate this present, Thank you guys for the time, sorry about my english, and sorry if I violate the rules of this forum....
Faprillah said:
Good evening from Indonesia guys, okay i've post my problem here before, this is my last post about my problem http://forum.xda-developers.com/showthread.php?t=2768357 , it's about 2 years ago, and now i'm still working hard to find the way how to unbrick my Gnote, i've tried so many way on Google, but there is no result again (like 2 years ago), okay guys, i'm give up for 1 years about my problem, but now i think there is still a way for me to unbrick my Gnote, can you guys help me??
My Gnote problem :
My Gnote stuck on "Samsung Galaxy Note GT-N7000" logo
I've back up my data using Clockworkmod (CWM Recovery) before it's bricked, and i have a copy on my Laptop
I can go to Download Mode
I Can't go to Recovery Mode, my recovery mode was TWRP
When i go to Recovery Mode, its stuck in "TEAMWIN" logo
I can charge my Gnote
My Gnote was unidentified on Samsung Kies
But my Gnote still can be read on Odin or Heimdall
I hope you guys tell me what i have to do to resolve this phone, and give me a solution for my Gnote problem, i know its too late, and you guys asking me about why i don't buy another one after its bricked for 2 years? its because my Gnote was my dad's present when i got a scholarship on junior high school, and i'm so appreciate this present, Thank you guys for the time, sorry about my english, and sorry if I violate the rules of this forum....
Click to expand...
Click to collapse
Soft-bricked is good, download mode and Odin recognisable is better so don't worry we can fix this for you. First though, your English is understandable so keep it up and you didn't violate anything. You even posted in the correct section so +5 for reading.
Looks like your recovery is broken so you need to first make sure your phone is boot-able. Therefore Odin flash a stock rom (this uses the download mode) to reset everything. From there, two ways are available to install recovery, stock update or Odin flash again so choose which one suits you best. Don't use the old KitKat roms (except NightOwl) since they're unsupported. Stable ones are NightOwl roms as it's still in active development.
AutumQueen92 said:
Soft-bricked is good, download mode and Odin recognisable is better so don't worry we can fix this for you. First though, your English is understandable so keep it up and you didn't violate anything. You even posted in the correct section so +5 for reading.
Looks like your recovery is broken so you need to first make sure your phone is boot-able. Therefore Odin flash a stock rom (this uses the download mode) to reset everything. From there, two ways are available to install recovery, stock update or Odin flash again so choose which one suits you best. Don't use the old KitKat roms (except NightOwl) since they're unsupported. Stable ones are NightOwl roms as it's still in active development.
Click to expand...
Click to collapse
Thank you so much for being honest, i'm so appreciate it, okay, i've flash so many recovery system (like Philztouch), but it still stuck in TEAMWIN logo, and there is no result, and i've flash another stock rom from sammobile, i choose the one for Indonesia region, but still no result, there is no difference, or should i try to flas the ginger bread stock rom??i try so many times to find another Dr Ketan Ginger bread stock rom, because the website where he upload the data (hotfile.com) were not open in indonesia (it has been blocked for a reason) so i have to find another website that provide the data, and there is no result again, or might be it's caused by the hardware or not??
Faprillah said:
Thank you so much for being honest, i'm so appreciate it, okay, i've flash so many recovery system (like Philztouch), but it still stuck in TEAMWIN logo, and there is no result, and i've flash another stock rom from sammobile, i choose the one for Indonesia region, but still no result, there is no difference, or should i try to flas the ginger bread stock rom??i try so many times to find another Dr Ketan Ginger bread stock rom, because the website where he upload the data (hotfile.com) were not open in indonesia (it has been blocked for a reason) so i have to find another website that provide the data, and there is no result again, or might be it's caused by the hardware or not??
Click to expand...
Click to collapse
Right now you ignore all of that. Odin flash a stock rom from sammobile, then install the correct recovery based on your stock ROM from this thread http://forum.xda-developers.com/showthread.php?t=1901191. Get the Jellybean rom, it's safer and easier.