Hello guys,
yesteday unfortunately my phone fall down and the screen was broken.
The LCD is working also because I have a film screen protection that take the glass "all together", but is not so nice...
I just buy from aliexpress the outer glass and the tool to open it.
Does some body know some nice guide to help me to change the glass (how open phone).
Thanks!
I'm the only unfortunately guy or I post in a wrong section?
I wrote an e-mail to Motorola in order to know the cost for replacement... I will inform you about the reply!
Inviato dal mio XT1068 utilizzando Tapatalk
Related
Hello
I have an question about the galaxy S 9000/9001
I dont understand how the touchscreen works, is there no digitzer or is the digitizer integraded in the amoled screen? I repair phone,s but HTC uses a glas digitizer and samsung not.
i hope somone could tell my how it works,
sorry for my bad englisch,
Greets
Wilbert
wippie said:
Hello
I have an question about the galaxy S 9000/9001
I dont understand how the touchscreen works, is there no digitzer or is the digitizer integraded in the amoled screen? I repair phone,s but HTC uses a glas digitizer and samsung not.
i hope somone could tell my how it works,
sorry for my bad englisch,
Greets
Wilbert
Click to expand...
Click to collapse
This should have been asked in the Q&A forum.
The difference between the galaxys and note is that the note has a wacom touchscreen & pen. The galaxys only has a touchscreen and does not support pens like the note has.
Sent from my SAMSUNG-SGH-I717 using xda premium
i dont think you understand me,
I repair smartphone,s and sell them. Normally a touchscreen contains of a plate of glass (digitzer) and the lcd screen that is under the digitzer. so you look trough the digitzer at the lcd and the digitzer register what you are doing with you finger. So, the galaxy S1 en the galaxy S plus has a screen within a digitzer or somthing. On ebay you can buy glass frontplate (not a digitzer a glass frontplate) what fell over the screen, but i dont find a video how you can instal these. normally you can simply put the lcd and the digitzer out but if you do that by a s1 you scratch the screen.
From what I can see there, it is a single unit. So I would guess you could not only replace the digitizer.
As i recall they are glued together and really hard to separate,that's also why u rarely see dust and moist under the glass of the sgs
I had a broken glass and i had to change the hole unit. It is very expensive. Glass and lcd costs 170 €.
Sent from my GT-I9001 using XDA
wintel is right. The digitizer is fused/glued onto the LCD screen directly. There's no easy way to separate the two. Theoretically you can buy the two separately, but then you will have to find a way to glue the two together yourself.
Unfortunately, my beloved Moto X fell to the ground and the back cover is ruined
do you know me approximately how much it might cost to replace at Motorola?
thanks
You can do it yourself, just check YouTube or Google , i changed mine by pleasure, white to blue
I'm afraid to ruin it
Inviato dal mio Motorola Moto X XT 1052
toroloco73 said:
I'm afraid to ruin it
Inviato dal mio Motorola Moto X XT 1052
Click to expand...
Click to collapse
Order a new back cover they are cheap and its just like taking a back cover off any other phone except you need to head up the back not hard to do at all
but after remove the old one, which tipe of glue i have to use with the new one?
Hello, I'm new here, I searched web for this problem but I can't find anything. My phone's frame cracked causeless. It was on the table and when I take it to my hands I saw that crack. I have a question to you, do you see anything like as that? And second is, I want to send it to guarantee because i think my frame isn't flexible to provide 180 degrees screen. But this phone all parts must flexible because the name of telephone is "G FLEX" . If they say " your device has been out from guarantee via user abuse" what can I do?
Here is an image of frame..
Sure my flex is cracked on the same edge... without any reason.. you could try warranty if you have..
Gesendet von meinem LG-D955
I just had my phone repaired and they did a pretty bad job putting it back together again. So I decided to keep the cost down and repair the phone myself as the last guy basically rob me of £100. Even at this price he did not even make the phone water tight again and just glued the screen down here and there in places.
Anyway, I have now opened up my phone, front and back covers have been removed, and I have manage to remove all of the glue which he used. In the process of removing the glue a small black strip came away where the microphone is situated.
Can anybody help me to explain what this is and if it is possible to repair or replace such item? A good guess tells me it is the microphone dust cover??
Many thanks in advance....
Posting some photo?
Inviato dal mio D5803 utilizzando Tapatalk
Hello there,
I need to replace my LCD display. Does anybody can tell me where to buy a compatible LCD panel + frame, possibly original at a competitive price?
I own a Redmi 4 Note global snapdragon. I'm based in Italy.
Thank you,
Davide
caravaggio971 said:
Hello there,
I need to replace my LCD display. Does anybody can tell me where to buy a compatible LCD panel + frame, possibly original at a competitive price?
I own a Redmi 4 Note global snapdragon. I'm based in Italy.
Thank you,
Davide
Click to expand...
Click to collapse
You have to be very lucky to receive a well glued frame. Even if you buy from the same supplier a lot of screens some of them will be terribly glued. The problem is that there are almost no edges at right and left so that it can be properly glued and backlight doesn't pass through the front glass and the frame. It might be fine if you test it first but when you're done with the replacement and it's time to put the back cover you will realise that it stretches the frame alot so if it's not properly glued you will have problem. My suggestion is to get separately an lcd and a frame and glue them by yourself with this glue https://m.ebay.co.uk/sch/i.html?_fr...C1.A0.H0.Xb7000.TRS0&_nkw=b7000+glue&_sacat=0 . Also compare the lcd flex cables of the new screen with the original broken one and if you find exposed connections just transfer the yellow duct tape from old screen to new (you can use regular electric duct tape as well). Finally transfer the white paper at the back of the buttons backlight to the new screen, that will make the button backlight to appear correctly, most screen replacement don't have that paper.
Sent from my Redmi Note 4 using Tapatalk
Sp_Ark said:
You have to be very lucky to receive a well glued frame. Even if you buy from the same supplier a lot of screens some of them will be terribly glued. The problem is that there are almost no edges at right and left so that it can be properly glued and backlight doesn't pass through the front glass and the frame. It might be fine if you test it first but when you're done with the replacement and it's time to put the back cover you will realise that it stretches the frame alot so if it's not properly glued you will have problem. My suggestion is to get separately an lcd and a frame and glue them by yourself with this glue https://m.ebay.co.uk/sch/i.html?_fr...C1.A0.H0.Xb7000.TRS0&_nkw=b7000+glue&_sacat=0 . Also compare the lcd flex cables of the new screen with the original broken one and if you find exposed connections just transfer the yellow duct tape from old screen to new (you can use regular electric duct tape as well). Finally transfer the white paper at the back of the buttons backlight to the new screen, that will make the button backlight to appear correctly, most screen replacement don't have that paper.
Sent from my Redmi Note 4 using Tapatalk
Click to expand...
Click to collapse
Seems to be quite challenging... And the outcome more likely mediocre.
Inviato dal mio Redmi Note 4 utilizzando Tapatalk
caravaggio971 said:
Seems to be quite challenging... And the outcome more likely mediocre.
Inviato dal mio Redmi Note 4 utilizzando Tapatalk
Click to expand...
Click to collapse
i replaced 2 screens with screens (plus frames) from this seller:
https://www.aliexpress.com/item/100...-Frame-Assembly-Redmi-Note-4/32800302529.html
Maybe i was just lucky, but the panels are really good. Only the button lights are a lil bit darker than the original ones (still very usable). And i ve ordered a lot of display on alix, sometimes you get ****ty ones but these panels were solid!
Emmes said:
i replaced 2 screens with screens (plus frames) from this seller:
https://www.aliexpress.com/item/100...-Frame-Assembly-Redmi-Note-4/32800302529.html
Maybe i was just lucky, but the panels are really good. Only the button lights are a lil bit darker than the original ones (still very usable). And i ve ordered a lot of display on alix, sometimes you get ****ty ones but these panels were solid!
Click to expand...
Click to collapse
Thanks for the feedback. It seems that buying on Ali can be disappointing. I was wondering if you know any other websites where to buy original spares.
Thanks again.
Inviato dal mio Redmi Note 4 utilizzando Tapatalk