I have a home cinema projector with no audio out, so in order to make my chromecast work I bought the J Tech DHDMI Audio Extractor. I've seen this exact model discussed elsewhere online, so as far as I know, others have used it successfully with Chromecast.
So my setup is - Chromecast into the IN of the HDMI Audio Extractor. HDMI cable OUT to my projector. And Optical Audio OUT to my sound system.
The problem? No audio.
I tried the exact same setup with my PS3 instead of the chromecast, and it worked - video and audio, with the exact same hookup. So the extractor works and the cords are fine.
I've tried all 3 audio toggles on the Audio Extractor (Pass-through/2.1/5.1) and none work for this.
I've tried multiple reboots and factory resets to no success.
I have heard that the ChromeCast tries to be smart about it's A/V capabilities, and there is a chance it may be looking at the HDMI connection, seeing that the projector has no Audio capabilities, and giving up, but I don't know how to attempt to reconfigure that, and there are certainly other people out there who have made my exact setup work, and I can't imagine what they are doing differently...
This theory does have additional evidence: When setting up my PS3 I had to set the sound set up to "Manual" rather than "Automatic" - in automatic mode, the PS3 said the HDMI connection had no audio capabilities. However in Manual mode it seemed to pass through audio just fine. I wonder if the same is happening with the Chromecast, only it's too "smart" to just push the audio through?
To test that theory I used an HDMI to VGA adapter to try to get VGA into my projector, but had the exact same result.
Finally, I tried to configure the Chromecast with JUST the optical audio out from the extractor without video so that it wouldn't try to guess what the audio was, and then hooking up the video after. Same result. Tried turning the projector/audio extractor on and off a bunch of times too..
Any ideas or suggestions would be greatly appreciated
deanCommie said:
This theory does have additional evidence: When setting up my PS3 I had to set the sound set up to "Manual" rather than "Automatic" - in automatic mode, the PS3 said the HDMI connection had no audio capabilities. However in Manual mode it seemed to pass through audio just fine. I wonder if the same is happening with the Chromecast, only it's too "smart" to just push the audio through?
Click to expand...
Click to collapse
If you can borrow an HDMI display/TV that has audio, you can try hooking that up first, booting the Chromecast to get audio, then do a hot-swap. That might work, but if it does, it's only a temporary solution and proves your theory that Chromecast is inspecting the audio capabilities on the HDMI side.
HDfury2 works well for me with its built in audio breakout.
bhiga said:
If you can borrow an HDMI display/TV that has audio, you can try hooking that up first, booting the Chromecast to get audio, then do a hot-swap. That might work, but if it does, it's only a temporary solution and proves your theory that Chromecast is inspecting the audio capabilities on the HDMI side.
HDfury2 works well for me with its built in audio breakout.
Click to expand...
Click to collapse
Yeah, I think that's got to be my next move if only to make sure the Chromecast is not a lemon.
In case you don't end up getting yours to work. This is what I use to split the audio and use the chromecast on my projector. and it works flawlessly.
http://www.amazon.com/gp/product/B00ECTHIKK/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
The latest:
* Confirmed Chromecast sends audio by hooking it up to a regular TV
* Tried to hook it up to projector through HDMI->VGA connection and still no audio
* Found out that I'm not the only one having Projector-Chromecast-HDMI splitter problems: (I can't post links but go to the AMazon page for the product)
Ugh. Who wants a free Chromecast? I just don't see this working out for me...
So whatever adapter is used must report audio capabilities. Like I mentioned, I have HDfury2 and get audio fine. The one @Znomon mentioned is cheaper though. Then again, it's still close to the cost of a Chromecast, so...
The latest:
* Confirmed Chromecast sends audio by hooking it up to a regular TV
* Tried to hook it up to projector through HDMI->VGA connection and still no audio
* Found out that I'm not the only one having Projector-Chromecast-HDMI splitter problems: (I can't post links but go to the AMazon page for the product)
Ugh. Who wants a free Chromecast? I just don't see this working out for me.../QUOTE]
Sorry u can't get it to work if u really want to give the chromecast away I'll take it been wanting to try one out.
Hi. I just registered to this forum to say that I am able to do EXACTLY what you trying to do.
But the trick is the "guy" i'm using. It's a chinese cheap HD Converter that splits hdmi audio into RCA output and hdmi video. I know that I have not that special audio since it is turned on a rca output, but it works.
I bought from a local tech market. And the first one I bought did not work and the difference between them is energy source (the first had not).
Good luck and keep persistent.
PS: If you really want, i can buy one for you here in Brazil and send you by mail... but the postage will cost more than the converter!
b3ltazar said:
The latest:
* Confirmed Chromecast sends audio by hooking it up to a regular TV
* Tried to hook it up to projector through HDMI->VGA connection and still no audio
* Found out that I'm not the only one having Projector-Chromecast-HDMI splitter problems: (I can't post links but go to the AMazon page for the product)
Ugh. Who wants a free Chromecast? I just don't see this working out for me.../QUOTE]
Sorry u can't get it to work if u really want to give the chromecast away I'll take it been wanting to try one out.
Click to expand...
Click to collapse
So there is no way to hack the audio without other hardware (splitter)? I was hoping maybe bluetooth can be a solution?
goprojojo said:
So there is no way to hack the audio without other hardware (splitter)? I was hoping maybe bluetooth can be a solution?
Click to expand...
Click to collapse
Sorry, need hardware to extract it.
Bluetooth, even if you managed to get Chromecast's Bluetooth enabled, paired and sending audio, wouldn't be good because the audio stream would be delayed, unless it also delayed the video stream too but even that would probably not guarantee lip sync.
I'll take it
Deancommie, I'll take it off your hands. I'm a school teacher, so free is the best price.
deanCommie said:
The latest:
* Confirmed Chromecast sends audio by hooking it up to a regular TV
* Tried to hook it up to projector through HDMI->VGA connection and still no audio
* Found out that I'm not the only one having Projector-Chromecast-HDMI splitter problems: (I can't post links but go to the AMazon page for the product)
Ugh. Who wants a free Chromecast? I just don't see this working out for me...
Click to expand...
Click to collapse
Time to upgrade to an Av receiver with hdmi input me thinks. Chromecast works flawlessly with my home pj setup.
Related
Does Chrome Cast support surround sound via optical cable from the TV to the Receiver once Chrome Cast is plugged in?
justin24 said:
Does Chrome Cast support surround sound via optical cable from the TV to the Receiver once Chrome Cast is plugged in?
Click to expand...
Click to collapse
yes. I have my tv set up that way and have no problems.
booked said:
yes. I have my tv set up that way and have no problems.
Click to expand...
Click to collapse
I have problems with this via web tabs, but Netflix puts out 5.1 just fine.
I have an old receiver that doesn't understand anything newer than regular 5.1 AC3/DD/DTS. My components are connected by optical via a monoprice HDMI switch (MD-415arc).
I have to set my Bluray, Hopper and Xbox 360 all to "Dolby Digital 5.1" (or similar) to achieve 5.1 surround, which works fine.
I seem to only be able to get 2.1 PCM out of the chromecast, and I'm wondering if that's because the only 5.1 output formats are AAC and DD+/E-AC3.
Can anyone confirm whether this is the case? Any inexpensive means to convert e-ac3 to old ac3?
I have a brand new Marantz NR1604 AVR and I only get 2 channels from my Chromecast when connected to an HDMI port on the receiver. Doesn't seem to matter what the source is. Also, when playing MKV movie files from my server thru Chrome/Chromcast, the commentary track is played by default instead of the normal soundtrack. Anyway to change the audio track when playing thru Chrome?
ynnek63 said:
I have a brand new Marantz NR1604 AVR and I only get 2 channels from my Chromecast when connected to an HDMI port on the receiver. Doesn't seem to matter what the source is. Also, when playing MKV movie files from my server thru Chrome/Chromcast, the commentary track is played by default instead of the normal soundtrack. Anyway to change the audio track when playing thru Chrome?
Click to expand...
Click to collapse
My understanding is that HDMI audio may be reduced to the lowest common denominator in the device chain. Might need to disable TV's ARC or something (lots of TVs only return 2 channel PCM audio)...I think.
What format is the audio track in your MKV? I think the chrometab mirroring only supports 2ch aac.
Sent from my BN NookHD+ using Tapatalk 4
gooberlx said:
My understanding is that HDMI audio may be reduced to the lowest common denominator in the device chain. Might need to disable TV's ARC or something (lots of TVs only return 2 channel PCM audio)...I think.
What format is the audio track in your MKV? I think the chrometab mirroring only supports 2ch aac.
Sent from my BN NookHD+ using Tapatalk 4
Click to expand...
Click to collapse
Thanks for the reply. I am connecting the Chromecast using the Marantz AVR HDMI input, not the tv. Most of my MKV files use DTS. You may be right about the chrometab mirroring only supporting 2ch aac. However, Netflix should have surround audio but I only get 2 channel. I also tried the Chromecast on my Onkyo AVR with the same result.
Is there some setting I am missing in the Chromecast?
ynnek63 said:
Thanks for the reply. I am connecting the Chromecast using the Marantz AVR HDMI input, not the tv. Most of my MKV files use DTS. You may be right about the chrometab mirroring only supporting 2ch aac. However, Netflix should have surround audio but I only get 2 channel. I also tried the Chromecast on my Onkyo AVR with the same result.
Is there some setting I am missing in the Chromecast?
Click to expand...
Click to collapse
I think there's supposed to be a way to select audio streams in the Netflix app. Maybe only the stereo stream is selected?
ynnek63 said:
I have a brand new Marantz NR1604 AVR and I only get 2 channels from my Chromecast when connected to an HDMI port on the receiver. Doesn't seem to matter what the source is. Also, when playing MKV movie files from my server thru Chrome/Chromcast, the commentary track is played by default instead of the normal soundtrack. Anyway to change the audio track when playing thru Chrome?
Click to expand...
Click to collapse
I have the same thing with my NR1602. Doesn't let me select anything but stereo from the netflix app. I thought I got it to play 5.1 at least once, but maybe I am wrong.
As a little test. I had my whole system powered up and ready to go and I powered cycle chromecast thinking maybe it was detecting the TV's stereo settings when the AVR was off (due to passthrough), but it still only gave me stereo options in chromecast.
edit: just tried from the chromecast chrome extension/plugin in chrome browser.. same thing.
edit2: Nevermind. It works fine I wasn't playing movies that had 5.1.
Luxferro said:
I have the same thing with my NR1602. Doesn't let me select anything but stereo from the netflix app. I thought I got it to play 5.1 at least once, but maybe I am wrong.
As a little test. I had my whole system powered up and ready to go and I powered cycle chromecast thinking maybe it was detecting the TV's stereo settings when the AVR was off (due to passthrough), but it still only gave me stereo options in chromecast.
edit: just tried from the chromecast chrome extension/plugin in chrome browser.. same thing.
edit2: Nevermind. It works fine I wasn't playing movies that had 5.1.
Click to expand...
Click to collapse
hmmm....i played an random movie, "Cabin in the Woods". Stereo only. Just tried "The Avengers" too, stereo only. Surely those movies would be streamed in 5.1. And there were no audio selections. My internet connection is also fast and stable.
hmmmmm.....just tried my Roku with Netflix, no 5.1 there either. Odd. Could this be a router problem? My Roku and AVR are both connected to my router via Ethernet. I try to avoid wireless when possible although I know the Chromecast uses wifi. Also, my WDLive plays DD and DTS fine from my server.
As a side note, the Dolby Pro Logic II on my Marantz actually does a decent job with surround, but this is simulated and isn't quite up to true 5.1
Thanks for the responses guys.
ynnek63 said:
hmmm....i played an random movie, "Cabin in the Woods". Stereo only. Just tried "The Avengers" too, stereo only. Surely those movies would be streamed in 5.1. And there were no audio selections. My internet connection is also fast and stable.
hmmmmm.....just tried my Roku with Netflix, no 5.1 there either. Odd. Could this be a router problem? My Roku and AVR are both connected to my router via Ethernet. I try to avoid wireless when possible although I know the Chromecast uses wifi. Also, my WDLive plays DD and DTS fine from my server.
As a side note, the Dolby Pro Logic II on my Marantz actually does a decent job with surround, but this is simulated and isn't quite up to true 5.1
Thanks for the responses guys.
Click to expand...
Click to collapse
In the Roku settings, you choose stereo or 5.1. This could be why you didn't get 5.1 on your Roku.
The Roku streams my MKV files in 5.1 thru the Plex app.
Sent from my Find 5 using xda premium
ynnek63 said:
The Roku streams my MKV files in 5.1 thru the Plex app.
Sent from my Find 5 using xda premium
Click to expand...
Click to collapse
Plex MKV 5.1 works fine for me as well, as Roku will pass through the AC3/DTS streams. I know that Roku (like Chromecast) streams Netflix 5.1 as DD+. Certainly seems like your AVR should be up to the task of decoding DD+. If you're not even being given the option of 5.1 audio in the app...I dunno, maybe that's a network/bandwidth issue (does Netflix test the bandwidth when it loads or something?). Otherwise I'd start hunting around the settings for your AVR.
gooberlx said:
Plex MKV 5.1 works fine for me as well, as Roku will pass through the AC3/DTS streams. I know that Roku (like Chromecast) streams Netflix 5.1 as DD+. Certainly seems like your AVR should be up to the task of decoding DD+. If you're not even being given the option of 5.1 audio in the app...I dunno, maybe that's a network/bandwidth issue (does Netflix test the bandwidth when it loads or something?). Otherwise I'd start hunting around the settings for your AVR.
Click to expand...
Click to collapse
Well, the receiver decodes DD and DTS automatically from other sources, so I don't think it's in the settings. And my internet speed tests at 18+ Mbps consistently which is more than enough for streaming Netfilx.
---------- Post added at 07:58 PM ---------- Previous post was at 07:12 PM ----------
ynnek63 said:
Well, the receiver decodes DD and DTS automatically from other sources, so I don't think it's in the settings. And my internet speed tests at 18+ Mbps consistently which is more than enough for streaming Netfilx.
Click to expand...
Click to collapse
WTF?!?! I solved the problem. The test movie I have been using is "The Avengers". Well, evidently, on Netflix, this movie is streamed in stereo only!! Seriously??!! For such a blockbuster movie? Wow! Anyway. So I picked a random movie, "Apartment 143", and boom, DD+!! WTF?
Well, I feel pretty stupid now, but am glad to have resolved the issue. Still blows my mind that such a blockbuster like "The Avengers" is only streamed in stereo.
So, thanks to those who replied and hopefully my stupidity will benefit others.
justin24 said:
Does Chrome Cast support surround sound via optical cable from the TV to the Receiver once Chrome Cast is plugged in?
Click to expand...
Click to collapse
My surround sound is working great in every casting method(local media, Netflix, Youtube, etc..). Everything sounds great so far...so far, so good!
How do you get surround sound from local media? Are you playing from tab in chrome? I didn't think chromecast could handle DD/DTS. Or is it passing along the audio streams so they get all the way to your receiver?
Skickat från min HTC Desire via Tapatalk 2
No matter what I try, I can't get 5.1 audio out of my Chromecast. The Netflix app doesn't even give me the option in the audio drop down list. I've tried rebooting, still nothing.
I have my CC plugged into my Vizio E390-A1 then the audio out through the optical out I to my receiver. Is it possible my receiver is too old and isn't able to decode the surround audio from Netflix? I made sure the audio out in the TV menu has Dolby Digital selected instead of PCM. Still nothing.
Sent from my Nexus 7 using Tapatalk 2
Sparky977 said:
No matter what I try, I can't get 5.1 audio out of my Chromecast. The Netflix app doesn't even give me the option in the audio drop down list. I've tried rebooting, still nothing.
I have my CC plugged into my Vizio E390-A1 then the audio out through the optical out I to my receiver. Is it possible my receiver is too old and isn't able to decode the surround audio from Netflix? I made sure the audio out in the TV menu has Dolby Digital selected instead of PCM. Still nothing.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
You have to have high quality stream selected in the Netflix menu. Log in on a PC, ts there somewhere.
Sent from my Nexus 7 using Tapatalk 4
Sparky977 said:
No matter what I try, I can't get 5.1 audio out of my Chromecast. The Netflix app doesn't even give me the option in the audio drop down list. I've tried rebooting, still nothing.
I have my CC plugged into my Vizio E390-A1 then the audio out through the optical out I to my receiver. Is it possible my receiver is too old and isn't able to decode the surround audio from Netflix? I made sure the audio out in the TV menu has Dolby Digital selected instead of PCM. Still nothing.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
99% of TVs will NOT pass 5.1 from hdmi sources. Usually you will only get 5.1 over toslink from the internal tuner. Certain TVs will do it, but its a huge exception to the rule. You need to plug directly into a receiver, or what I do is use a HDMI switch with a toslink output that can force 5.1. Its pretty snazzy, has ARC so I even get 5.1 audio from the tv tuner with one hdmi cable and one optical cable. Box isnt cheap though, something like $80 on monoprice.
Sent from my SCH-I545 using xda app-developers app
Thanks. That has got to be what I'm running into.
Sent from my Nexus 7 using Tapatalk 2
I have an issue with Netflix playing 5.1 sound. It doesn't show me the option in the device when I want to cast, I tried my Galaxy SIII, my Acer A500 tablet and the chrome google cast extension.
Works everything but only show me the options English (Stereo) Spanish (Stereo) or Portugues (Stereo) in the audio icon
If I use the same account in a PS3 of a friend with the same shows, works fine, but in my devices not work. Any ideas?
Teitn said:
I have an issue with Netflix playing 5.1 sound. It doesn't show me the option in the device when I want to cast, I tried my Galaxy SIII, my Acer A500 tablet and the chrome google cast extension.
Works everything but only show me the options English (Stereo) Spanish (Stereo) or Portugues (Stereo) in the audio icon
If I use the same account in a PS3 of a friend with the same shows, works fine, but in my devices not work. Any ideas?
Click to expand...
Click to collapse
My Netflix has not given me anything beyond Stereo so far, but most of the content I've been casting probably doesn't have surround anyway.
bhiga said:
My Netflix has not given me anything beyond Stereo so far, but most of the content I've been casting probably doesn't have surround anyway.
Click to expand...
Click to collapse
I tried content like Star Trek (The New Movie) or Dr. Who (New Seasons), everything new stuff with the 5.1 legend and tested in the PS3 with real 5.1 capabilities, so it's anoying.
Teitn said:
I tried content like star trek or Dr. Who, everithing new stuff with the 5.1 legend and tested in the PS3 with real 5.1 capabilities, so it's anoying.
Click to expand...
Click to collapse
Well we know surround is possible on the CCast so I would guess that the CCast Player App Netflix is using doesn't support surround yet.
Not sure if they have a support forum but complaining loudly there might get them off their butt on implementing it.
It is possible to do 5.1 but your device must let chromecast know that it could.
Examples my chromecast connect to Vizio TV then TV output to a Yamaha 4300 7.1 soundbar = stereo
But chromecast to the yamaha 4300 soundbar then soundbar using HDMI ARC to TV = glorious 5.1
Sent from my Nexus 4 using Tapatalk
So, I have my Philips TV with the HDMI conected to the chromecast and TV connected by HDMI-ARC to my Philips BD HT 5.1... you say I have some issue thats not telling to the CC I can reproduce 5.1 by the ARC???
Teitn said:
So, I have my Philips TV with the HDMI conected to the chromecast and TV connected by HDMI-ARC to my Philips BD HT 5.1... you say I have some issue thats not telling to the CC I can reproduce 5.1 by the ARC???
Click to expand...
Click to collapse
Yes plug the CCast into the Philips unit not the TV.
Asphyx said:
Yes plug the CCast into the Philips unit not the TV.
Click to expand...
Click to collapse
OK. I doomed, because my Phillips Blue Ray it's my 5.1 amp too, and doesn't have HDMI In, just HDMI-ARC or optical/coaxial in... If I try with an optical cable I have the same Issues?
Teitn said:
OK. I doomed, because my Phillips Blue Ray it's my 5.1 amp too, and doesn't have HDMI In, just HDMI-ARC or optical/coaxial in... If I try with an optical cable I have the same Issues?
Click to expand...
Click to collapse
Not doomed yet...Just need to find a workaround....
Is the TV surround capable? (Maybe not but if it has HDMI-ARC I have to assume it is)
Check the audio settings on your TV. They maybe spread all over the place unfortunately.
There will be one MAIN audio section for general TV settings. But each Input on the TV may have it's own separate Audio settings and they will show up on the menu that controls inputs.
It is possible that it isn't the TV not communicating with the CCast but the fact the Input or TV is not set to use Surround and therefore is not passing it to your Amp.
If you can tell me what Brand and Model TV you have I might be able to help you more on where to look for the settings that are tripping you up.
If your TV supports ARC I can't imagine it would not support Surround so it must be a setting that is wrong that is causing this issue.
I am having a similar issue, my LG connects to my Yamaha Receiver (which is older and does not have HDMI inputs.) via the optical input and passes through 5.1 from my Roku and even it's own Netflix app, but nada from my CC.
Dan
Sent from my Nexus 5 using xda app-developers app
The CC will only output DD+ 5.1 audio from Netflix and won't (possibly can't) downgrade this to DD 5.1 as other devices can. Not sure about the Roku but PS3 definitely can downgrade to DD5.1
If your audio receiving device doesn't support DD+ (only newer devices do) then you won't get 5.1 from Netflix CC.
Asphyx said:
Not doomed yet...Just need to find a workaround....
Is the TV surround capable? (Maybe not but if it has HDMI-ARC I have to assume it is)
Check the audio settings on your TV. They maybe spread all over the place unfortunately.
There will be one MAIN audio section for general TV settings. But each Input on the TV may have it's own separate Audio settings and they will show up on the menu that controls inputs.
It is possible that it isn't the TV not communicating with the CCast but the fact the Input or TV is not set to use Surround and therefore is not passing it to your Amp.
If you can tell me what Brand and Model TV you have I might be able to help you more on where to look for the settings that are tripping you up.
If your TV supports ARC I can't imagine it would not support Surround so it must be a setting that is wrong that is causing this issue.
Click to expand...
Click to collapse
Yes. I have the cable receiver conected to the HDMI 1 of my Philips 32PFL4017G TV, the HDMI 2 to the CC and the HDMI 3 to my Philips HTS3541 Blu-ray via HDMI-ARC. If I use the cable tv receiver I have 5.1, the same if I broadcast some video via DLNA from my CPU, so something it's wrong but I don't know what.
I also own a Phiilips TV and my Chromecast doesn't send 5.1 audio to my Logitech z-5550. Some may argue that my Z-5550, doesnt support, but HGO GO doesn't work either.
Just for information, I also do own a Roku 3 (which doesn't have a spdif output) and I have to rely on the spdif out of my Philips TV to send 5.1 to my Z-5550 and it works flawlessly, even using Netflix that supports only Dolby Digital Plus.
Apparently there is something odd going on with Chromecast and Philips TVs.
I am going to test this using the same setup and a Sony TV.
HbbS said:
I also own a Phiilips TV and my Chromecast doesn't send 5.1 audio to my Logitech z-5550. Some may argue that my Z-5550, doesnt support, but HGO GO doesn't work either.
Just for information, I also do own a Roku 3 (which doesn't have a spdif output) and I have to rely on the spdif out of my Philips TV to send 5.1 to my Z-5550 and it works flawlessly, even using Netflix that supports only Dolby Digital Plus.
Apparently there is something odd going on with Chromecast and Philips TVs.
I am going to test this using the same setup and a Sony TV.
Click to expand...
Click to collapse
Same situation in my bedroom except for my TV being an LG and my sound bar being a Yamaha.
Roku3 outputs 5.1 as does the native LG Netflix app.
Dan
Sent from my Nexus 5 using xda app-developers app
HbbS said:
Just for information, I also do own a Roku 3 (which doesn't have a spdif output) and I have to rely on the spdif out of my Philips TV to send 5.1 to my Z-5550 and it works flawlessly, even using Netflix that supports only Dolby Digital Plus.
Click to expand...
Click to collapse
DD+ requires HDMI, it won't go over spdif (requires too much bandwidth) so either something is converting it to DD, or youre not getting true 5.1
I too have a Samsung TV that I will be connecting my Chromecast to, and then SPDIF from the TV to my Logitech Z-5500 receiver.
Has anyone managed to pull such a setup off and get surround sound? I am debating wether or not to buy a chromecast when I go to the states in two weeks
the main problem is, the HDMI arc (or optical) wont support DD+, only DD.. but Netflix (Chromecast) only supports DD+, so its a no go..
i use chromecast to most of my netflix use, but if i realy want to use 5.1 i use the netflix client on my bluray player ( as it is my receiver too )
the only way to get 5.1 sound from chromecast on netflix is to use a receiver with hdmi input!
Hi Everyone,
I've been looking all over the net for some answers for a DIY Project i'm trying to do.
Basically I want to have buy either ChromeCast or EzCast and connect to my cars AUX double din head unit to mainly mirror Pandora from my Android Mobile (Sony Xperia Z).
The questions I'm hoping to have answered are the following;
1. Can I use ChromeCast or EzCast in my car without being connected to a wireless hotspot or network? Being a car setup, I wont have a hotspot in my car, unless a LTE/4G Dongle, which I don't intend to.
- Will they work by just directly from my Mobile to the Cast dongle?
2. If mirroring Pandora, will the music or the head units display stop when I turn off my Mobiles display? (I dont want to constantly have my display on as that will drain my battery)
3. Which is better EzCast or ChromeCast Dongles?
If someone would be so kind as to answer the above questions for me, I would be greatly appreciative. :good:
Thanks
Not Chromecast - Chromecast requires Internet connection because it's designed to pull content from the Internet.
No. In the cast of Chromecast, Chromecast itself is the device requesting the stream and playing it. Your controlling device is only a control and can be rebooted, disconnected, turn off, etc.
In this case, given your requirement of not having a hotspot/Internet, I would say not Chromecast. I don't know if EzCast is appropriate, so I'll leave that to others.
bhiga said:
Not Chromecast - Chromecast requires Internet connection because it's designed to pull content from the Internet.
No. In the cast of Chromecast, Chromecast itself is the device requesting the stream and playing it. Your controlling device is only a control and can be rebooted, disconnected, turn off, etc.
In this case, given your requirement of not having a hotspot/Internet, I would say not Chromecast. I don't know if EzCast is appropriate, so I'll leave that to others.
Click to expand...
Click to collapse
THIS!
He would be much better off just getting himself an LTE Nexus7, finding a way to mount it that is convenient and wiring it into the Audio system Aux Connection directly or installing a BlueTooth Audio Access point to that aux input that the Tablet or phone can connect to.
Many of today's better Car stereos have an Aux input that will override the input currently selected on the AV unit for use with GPS when it detects an audio signal.
And by dong this you can use the Tablet as a GPS unit as well!
More expensive but you will need the tablet or phone to control the CCast anyway doing what you want to do....
You could just buy a mount that is wired correctly and use your current Phone or Tablet to do this.
Or buy a tablet specifically for this purpose.
Asphyx said:
THIS!
He would be much better off just getting himself an LTE Nexus7, finding a way to mount it that is convenient and wiring it into the Audio system Aux Connection directly or installing a BlueTooth Audio Access point to that aux input that the Tablet or phone can connect to.
Many of today's better Car stereos have an Aux input that will override the input currently selected on the AV unit for use with GPS when it detects an audio signal.
And by dong this you can use the Tablet as a GPS unit as well!
More expensive but you will need the tablet or phone to control the CCast anyway doing what you want to do....
You could just buy a mount that is wired correctly and use your current Phone or Tablet to do this.
Or buy a tablet specifically for this purpose.
Click to expand...
Click to collapse
Thank god! Cheers guys for the helpful responses, you just saved me alot of time!
Thing is I have an Alpine INA-W900BT head unit, it has bluetooth, it has GPS, it plays videos(not that I've ever used it lol), reverse camera video and the main thing is it sounds amazing! As an amplifier it reproduces great audio. A tablet can't give you that sound clarity and control with the cars audio system/sub.
Annoying thing is BT audio stream though AUX leaves me with a blank display, so I figure i'll try to "cast" it. Atleast this way I should be able to see pandora on the screen.
Maybe the next car i'll do the Tablet DIY similar to this fellow, don't want to spend to much cash on this right now;
https://www.google.com.au/url?sa=t&...xXpXfPR6d9YTlrC62eKMkGw&bvm=bv.69411363,d.c2E
For now, just want to mirror or local cast somehow. You're right though, end of the day I'm still going to have to control it with my phone...
Maybe get a Android Smart Box hmmm....
Does anyone know if Ezcast requires a hotspot?
Why don't you use MHL?
kuri_2k said:
Thank god! Cheers guys for the helpful responses, you just saved me alot of time!
Thing is I have an Alpine INA-W900BT head unit, it has bluetooth, it has GPS, it plays videos(not that I've ever used it lol), reverse camera video and the main thing is it sounds amazing! As an amplifier it reproduces great audio. A tablet can't give you that sound clarity and control with the cars audio system/sub.
Click to expand...
Click to collapse
Well unfortunately that unit is made more for Apple not Android....
If you have an Apple device and plug it into USB I believe it will display video for control of the device to the screen. But it seems to be limited to iPod and Music storage and makes no mention of things like Pandora. It would appear from the description that plugging in via USB turns the iPod or iPhone into a storage device that the AV unit then loads files from into it's native music player.
This seems to suggest that no matter what you try to use, you will not get control or anything but a blank screen when streaming it as it will all have to plug in via the Aux (even if you don't go BT).
The limitation is really how do you get the audio into the AV unit..I'm sure it has no HDMI ports on it,
And any Audio Breakout you use is going to connect to an Aux port.
This unit you have appears to be just a generation before mobile data in the car was expected....
kuri_2k said:
1. Can I use ChromeCast or EzCast in my car without being connected to a wireless hotspot or network? Being a car setup, I wont have a hotspot in my car, unless a LTE/4G Dongle, which I don't intend to.
- Will they work by just directly from my Mobile to the Cast dongle?
Click to expand...
Click to collapse
Contrary to what has been said, this can be done, or say at least I did it and I am waiting for someone to reproduce my results and confirm.
You can stream from your phone directly to your chromecast, provided you activated the mobile WiFi hotspot of same phone (no need for an external router).
Read http://forum.xda-developers.com/showthread.php?t=2791313
Please report your results.
Sent from my GT-N7100 using XDA Premium 4 mobile app
Hi all,
Yesterday I bought my chromecast and I've set it up without problems, but I noticed the sound played through the chromecast is just a little bit garbled and worst of all, it's pitched like a semi-half tone down. For movies and youtube this'll won't be a problem, but I play the guitar and when music is played, it's horribly out of tune.
I couldn't find anything on the internet as a solution. Does anyone encounter the same problem?
Setup:
Nexus 5 with cm11, android 4.4.4
Stock chromecast
1080p HDTV
roytje88 said:
Hi all,
Yesterday I bought my chromecast and I've set it up without problems, but I noticed the sound played through the chromecast is just a little bit garbled and worst of all, it's pitched like a semi-half tone down. For movies and youtube this'll won't be a problem, but I play the guitar and when music is played, it's horribly out of tune.
I couldn't find anything on the internet as a solution. Does anyone encounter the same problem?
Setup:
Nexus 5 with cm11, android 4.4.4
Stock chromecast
1080p HDTV
Click to expand...
Click to collapse
Sounds like a dolby incompatibility....
Does the source have a dolby track and does this happen with a stereo content item?
Asphyx said:
Sounds like a dolby incompatibility....
Does the source have a dolby track and does this happen with a stereo content item?
Click to expand...
Click to collapse
Its with all content; whether its youtube, or casting my whole android screen, google music, I even tried it casting a youtube tab from chrome on my notebook. All same results.. Lower pitched sound and a little bit chopped.
But I sure do wanna try out everything. How can I find out wheter there is a dolby track?
roytje88 said:
Its with all content; whether its youtube, or casting my whole android screen, google music, I even tried it casting a youtube tab from chrome on my notebook. All same results.. Lower pitched sound and a little bit chopped.
But I sure do wanna try out everything. How can I find out wheter there is a dolby track?
Click to expand...
Click to collapse
If it is happening on everything then it is unlikely what I suspected it was...Especially if it happens on You Tube as well...
It could be a bad HDMI network connection between the CCast and the TV....
So try this....
1 - Try another input on the TV
2 - Try the CCast on a different TV and see if it still happens
If #1 solves it then it's that one TV Input, You can check the audio setting for that input but the CCast should communicate all of that and send the proper signal. (try re-plugging into the original input and see if the problem goes away)
If #2 has the same problem then it's a lemon CCast and you might need a replacement.
Asphyx said:
If it is happening on everything then it is unlikely what I suspected it was...Especially if it happens on You Tube as well...
It could be a bad HDMI network connection between the CCast and the TV....
So try this....
1 - Try another input on the TV
2 - Try the CCast on a different TV and see if it still happens
If #1 solves it then it's that one TV Input, You can check the audio setting for that input but the CCast should communicate all of that and send the proper signal. (try re-plugging into the original input and see if the problem goes away)
If #2 has the same problem then it's a lemon CCast and you might need a replacement.
Click to expand...
Click to collapse
In a clear moment #1 has already come to mind, so tried another hdmi input, same results.. I don't have another hdmi tv before wednesday.. Will try it then and will post my results..
I just tried my chromecast on another tv and it worked normally, so it was my hdtv.
I checked the internet and there was an update. Updated and my chromecast works perfectly now!
Thanks for the input!
roytje88 said:
I just tried my chromecast on another tv and it worked normally, so it was my hdtv.
I checked the internet and there was an update. Updated and my chromecast works perfectly now!
Thanks for the input!
Click to expand...
Click to collapse
Good glad your all well....
HDMI is really a network so any small issues and it falls apart.
I have already got MK808 android stick, which is 1.2 GHz dual core with Mali 400 GPU.
After using it long as general purpose device, decided to convert it as media centric device, with 2.1 speaker setup
I am facing following limitations,
1. Not able to play HD/1080 videos smoothly
2. Tried USB sound card to connect it to 2.1 speaker, but quality is not good
So I started to look for alternate devices. I liked RPI 2 especially due to it's support, but before buy, I have some questions unanswered
1. Since I have 1.2 GHz device, I am just wondering with RPI 2 being 900 MHz, is it powerful enough device as media PC. Especially can we consider it for future proof (may be 3 years)? I am thinking because, I don't want to fall in situation to buy another device only after next 1 year due to RPI2 limitation.
2. When I add case, WiFi dongle, power cable, HDMI cable etc, it's going to about 75 USD. At this price, there are many choices like,
# Android stick MXIII, which seems more powerful with android support
# Dedicated media player like,
http://www.amazon.in/s/ref=nb_sb_noss_1?url=search-alias=aps&field-keywords=media+player
But I don't know, how to compare those with RPI 2 and conclude which one will be more powerful and future proof
Any suggestion?
RmatriX1218 said:
I have already got MK808 android stick, which is 1.2 GHz dual core with Mali 400 GPU.
After using it long as general purpose device, decided to convert it as media centric device, with 2.1 speaker setup
I am facing following limitations,
1. Not able to play HD/1080 videos smoothly
2. Tried USB sound card to connect it to 2.1 speaker, but quality is not good
So I started to look for alternate devices. I liked RPI 2 especially due to it's support, but before buy, I have some questions unanswered
1. Since I have 1.2 GHz device, I am just wondering with RPI 2 being 900 MHz, is it powerful enough device as media PC. Especially can we consider it for future proof (may be 3 years)? I am thinking because, I don't want to fall in situation to buy another device only after next 1 year due to RPI2 limitation.
2. When I add case, WiFi dongle, power cable, HDMI cable etc, it's going to about 75 USD. At this price, there are many choices like,
# Android stick MXIII, which seems more powerful with android support
# Dedicated media player like,
http://www.amazon.in/s/ref=nb_sb_noss_1?url=search-alias=aps&field-keywords=media+player
But I don't know, how to compare those with RPI 2 and conclude which one will be more powerful and future proof
Any suggestion?
Click to expand...
Click to collapse
I have been using Raspberry Pi 2 B+ for a month as media center with the Rasplex OS. I have tried 1080p, 720p and a few different formats like mp4 mkv, avi etc and they all work fine, even while seeking. The main reason for this could be that the processing/trans-coding of the video is done on the server(the files are not stored on Pi, and no HDD is connected to it.) This all works on a WiFi adapter.
If You can use Plex app on Your Android Stick and use a plex server somewhere, You won't need to buy a Pi. Although You would need to buy Plex pass to come over restriction in Android app I think.
Rpi 1 can run almost limitless video bitrate via smb share. But it has issues with very heavy audio since 1 pi's processing power is not great basically. But mines 1 still run movies with 10mbps video and 5mbps audio well. Above that it starts to buffer maybe its network bottlenecking. Audio quality via hdmi is great. I got a pi 2 just a while ago looking forward to test it with openelec. I have chromecast stick too i think that i wouldn't need rpi if i didn't had media at local share. Chromecast is far more better if u use only netflix, viaplay, youtube, popcorn, etc and can use it with android device phone/tablet.
Thanks for replies.
Has anyone connected it to 2.1 speaker system?
Because, that is my one of the aim.
Can anyone tell quality if connected to AV cable/stereo jack?
And, is it possible to get video through HDMI cable and audio through AV cable to 2.1 speaker?
Can someone, who already have similar configuration, help me out to build similar one.
RmatriX1218 said:
Thanks for replies.
Has anyone connected it to 2.1 speaker system?
Because, that is my one of the aim.
Can anyone tell quality if connected to AV cable/stereo jack?
And, is it possible to get video through HDMI cable and audio through AV cable to 2.1 speaker?
Can someone, who already have similar configuration, help me out to build similar one.
Click to expand...
Click to collapse
Yes, it can output both video through HDMI cable and audio through AV cable at the same time.
Nypan sr said:
Yes, it can output both video through HDMI cable and audio through AV cable at the same time.
Click to expand...
Click to collapse
How do you rate quality through AV cable out?
I believe, AV out doesn't give good quality as HDMI.
Through USB sound card on my MK808, I am loosing bass. Woofer doesn't give any sound.
I am worried, same should not be with RPI as I'll loose all fun of watching movies.
Anybody with 2.1 speaker setup hear?
RmatriX1218 said:
How do you rate quality through AV cable out?
I believe, AV out doesn't give good quality as HDMI.
Through USB sound card on my MK808, I am loosing bass. Woofer doesn't give any sound.
I am worried, same should not be with RPI as I'll loose all fun of watching movies.
Anybody with 2.1 speaker setup hear?
Click to expand...
Click to collapse
HDMI is better. My 2.1 system is connected to my LG-tv, so i dont know what quality the 3,5 mm output is.
Nypan sr said:
HDMI is better. My 2.1 system is connected to my LG-tv, so i dont know what quality the 3,5 mm output is.
Click to expand...
Click to collapse
Unfortunately, my LED TC has onlu audio jack. So, if I connect 2.1 system with it, I get very low volume.
So, only option to get sound from RPI AV jack.
Can you check in your system with AV jack and report the difference in output?
Any though on
RPI2 vs MXIII vs MXQ?
RmatriX1218 said:
How do you rate quality through AV cable out?
I believe, AV out doesn't give good quality as HDMI.
Through USB sound card on my MK808, I am loosing bass. Woofer doesn't give any sound.
I am worried, same should not be with RPI as I'll loose all fun of watching movies.
Anybody with 2.1 speaker setup hear?
Click to expand...
Click to collapse
Composite video out quality is pretty good. On OpenELEC, playing 720p live stream Russia Today. Output is classic PAL resolution. Image quality is better than 576p SD DVB-S thru SCART with good quality sat reciever. I have big old widescreen CRT Panasonic Quintrix TV.
If you play any 720p movie, quality will be comparable to DVD player with SCART.
I dont know how is your audio input for these 2.1 speakers. Just single 3 pole 3.5mm or also separate one for subwoofer? If it need 2 connectors then you need 5.1 sound card with (usually orange) center/subwoofer connector.
I think you should turn up your headphone volume on your tv
Sent from my thl T6S using XDA Free mobile app
Ideal for local media or media on a NAS but not being able to access Netflix, Hulu etc (like you can on Android) might be a bit of a put off. Shame really coz the Pi2 is more than powerful enough to support these streaming services