Related
My current situation.
Streak 7 boots after factory reset, asks for a password. there never was one. after numerous attempts i just decided to install another rom.
i have all the files etc and know how to flash it with clockwork, but i cant get it onto the internal sd. only the external. meaning clockwork cant detect it. im kinda stuck here....
I had this issue once, I wiped again from recovery, cache and dalvic as well and it cleared up. Also I use fastboot to install everything for roms.
Sent from a Hacked, Modded and customized Streak 7
sadly ive tried that repeatedly :L
Did you use fastboot to reinstall the system, boot, and recovery files? This or Nvflash will be your only way to get out of it then.
Sent from a Hacked, Modded and customized Streak 7
i could, if you have a solution to why it hangs at "starting fastboot usb download protocall"
and thanks for the help by the way. this has caused me too much stress lol
EDIT: And if you could help me with the fastboot commands afterwards that would be great. i know how to flash recovery and thats about it.
Its suppose to say that on your device.
Now plug it into the computer, install the fastboot drivers, grab a copy of fastboot.exe, and flash the images.
giveen said:
Its suppose to say that on your device.
Now plug it into the computer, install the fastboot drivers, grab a copy of fastboot.exe, and flash the images.
Click to expand...
Click to collapse
Giveen, I am trying to help fill in for those that have been around longer than those of us that are new. I have to agree with the new people that it is difficult to find the knowledge on this site sometimes and the list of commands that are needed to get going. I know I have spent many hours on google, XDA, TabletRoms and WIKI looking for answers. I do get that it is frustrating for you as a developer as well. Sit back and relax and some of us newer noobs will try to assist.
Sent from a Hacked, Modded and customized Streak 7
---------- Post added at 11:14 AM ---------- Previous post was at 11:09 AM ----------
Meanc20 said:
i could, if you have a solution to why it hangs at "starting fastboot usb download protocall"
and thanks for the help by the way. this has caused me too much stress lol
EDIT: And if you could help me with the fastboot commands afterwards that would be great. i know how to flash recovery and thats about it.
Click to expand...
Click to collapse
You need to do more reading here, yea I know it's hard to find info sometimes. Google every way you can think of for your problem and an answer will be found. You don't have a brick yet but you need to know what your doing before diving into this stuff. I spent a week researching before I dived into this just to make sure I knew what I was doing. YouTube video search, flashing Dell streak 7, at least I think that is close enough. It is a for part series on how to flash a custom ROM from Nvflash but you need to read and find the fastboot commands and drivers. They are here.
Sent from a Hacked, Modded and customized Streak 7
i have everything ready but fastboot commands dont work because the device is still stuck "starting the protocall"
i have the correct drivers etc installed but still nothing
Meanc20 said:
i have everything ready but fastboot commands dont work because the device is still stuck "starting the protocall"
i have the correct drivers etc installed but still nothing
Click to expand...
Click to collapse
That's what it's supposed to show till commands are sent from your PC. Do you have "still" have a yellow "?" mark in your device manager?
A quick function test is to type: fastboot reboot and your S7 should reboot.
And this is why I plan on making a fastboot video.
When I first purchased this phone I was able to boot to the default recovery that came with the phone ( which clearly had a *fastboot option*), it came with stock 5.1, and a bunch of bloatware.
I downloaded the one click root method for the h811 which was perhaps the easiest root i've ever done. great. i also had to flash my recovery to twrp 2.8 for some reason.
Rocked out to a newely rooted device on 5.1 until the t mobile bloatware and system update notification kept bugging me, so I said * eff it, i've been holding out for a while*
So I get to the cm 13 wiki for my device, I managed to install the cm recovery ( cant remember how i did this for some reason) and then i was able to flash cm13 to my phone. CM13 is sleek, and smooth but is presenting problems.
First of all, no google play store and the gapps zip wont install through cm recovery ( fails and tells me to use twrp instead which is a problem because i can't boot this phone into fastboot mode)
I am unrooted and can not figure out how to properly root a T mobile h811 running cm13, so the twrp manager doesn't work because it "requires root" then shuts down. ( enable root access in the cm13 developer options does nothing at all and yes, for adb and apps)
FAST BOOT MODE DOES NOT SEEM TO EXIST ANYMORE ON MY PHONE - Following the many tutorials, which goes long the lines of using adb/fastboot, adb devices can see my device, but fastboot devices can't ( figures) because its not in fastboot mode. Any fast boot reboot bootloader or any variant of that command only reboots the phone, to... swipe the screen.
I've installed the lg bridge crap ( which installed an updated usb driver) that doesn't even recognize my phone " no mobile device connected". tried uninstalling and reinstalling, but nothing. When putting the phone in download mode, to see if adb would rcognize it, windows sees this as a new device , installs drivers but says " device can not start, code 10 * in device manager. :silly:
is there anything that can be done?? google searches result in obvious solutions that SHOULD work but don't, or threads where a person coincidentally has the same exact problem as I do, but their response is usually the last response in the thread that goes unanswered
summary : I've install cm13 on my lg g4 h811, I do not have root access, I can not install twrp due to ( no fastboot mode) in effect, i cant install gapps, cant root phone etc..
any help?
did you ever unlock the phone....?
Yes, unlocking the phone is one of the first things you would need to do. In Developer Options > OEM Unlock. Then in bootloader, run the unlock command. This will delete /data and internal storage so back up your files so you can transfer them back via adb or fastboot.
Then you're probably going to need to temp boot TWRP, then flash the TWRP recovery image in TWRP. THEN you can flash properly.
Carefully read through this thread:
http://forum.xda-developers.com/tmobile-g4/development/stock-h811-20i-images-kdz-flashable-t3308227
Good luck.
Edit: oh and this thread belongs in Q&A.
Alright. Am I only to read the first post or all 30+ pages? ( not that i have a problem, just curious)
Reeeeaaadd ittt alllll! Just kidding. The first post should be fine. You'll be looking at doing everything after flashing the kdz. If you think you've messed up your partitions, flash the kdz and start over.
aoaleman said:
Reeeeaaadd ittt alllll! Just kidding. The first post should be fine. You'll be looking at doing everything after flashing the kdz. If you think you've messed up your partitions, flash the kdz and start over.
Click to expand...
Click to collapse
"ARE YOU HAVING TROUBLE WITH LGUP NOT SEEING YOUR MOBILE?
Try this....... take the back off your mobile so you can get at the battery. Connect your mobile via USB. Start LGUP, if it does not see your phone DO NOT DISCONECT, DO NOT RESTART OR TURN OFF LGUP. Take out the battery and then put it back in.......let the phone restart on its own. LGUP should now see it."
didn't work, very frustrating. any clues? on windows 8.1 by the way. tried two computers. none can see this phone. I can connect the phone to the computer and see its storage, lg usb driver is installed
You probably need to reinstall the drivers. It might be the fastboot driver. That's what worked for me.
I've reinstalled the official drivers, uninstalled them... Jusst the mobile USB driver, a combo of both, plenty of times. Don't understand why this software doesn't see my phone
Lgup, lgair, lg bridge, lg USB driver (skinned down) .. Nothing works tested on my gaming rig., and work laptop both running win 8.1 64 bit
Hey man next time you have a question just post it in the Q&A section this section is forces android development just wanted to let you know
TacoTuco said:
Hey man next time you have a question just post it in the Q&A section this section is forces android development just wanted to let you know
Click to expand...
Click to collapse
This section does get more views though haha.
Anyway I feel that the 811 is one of the more finicky devices to get into fastboot at least in my experience. I had to enable and disable dev options while plugging and unplugging device and it finally worked. No idea if that'll work for everyone though.
I reasked the question in Q and A. Please help some one.
You start over. LG bridge.
Having the same issue. I'm on Windows 10. What developer settings did you mess with to get it working, tiskewlio?
The issue i seem to be having is that when I put the device in download mode ( didnt know that is the same as fastboot) drivers attempt to install, "LGE MTP USB DEVICE" has a yellow exclamation mark with a code 10-device cannot start error message. I believe this the issue as any fastboot command stuff says " waiting for any device" . must not yet see the mtp driver .. Also noticed the bridge app immeditaley tries to pick up my device in download mode but fails due to this problem..
Any clues?
Sunaj1 said:
The issue i seem to be having is that when I put the device in download mode ( didnt know that is the same as fastboot) drivers attempt to install, "LGE MTP USB DEVICE" has a yellow exclamation mark with a code 10-device cannot start error message. I believe this the issue as any fastboot command stuff says " waiting for any device" . must not yet see the mtp driver .. Also noticed the bridge app immeditaley tries to pick up my device in download mode but fails due to this problem..
Any clues?
Click to expand...
Click to collapse
]
Make sure you are using all these files...
https://drive.google.com/folderview?id=0B_sPus48oLWYQy1MTFRBSlBxMGc&usp=sharing
thevirgonian said:
]
Make sure you are using all these files...
https://drive.google.com/folderview?id=0B_sPus48oLWYQy1MTFRBSlBxMGc&usp=sharing
Click to expand...
Click to collapse
silly question maybe, but is there a specific tutorial in getting this to work with the files provided given my situation? (commands, etc..) will this somehow bypass the the lge mobile mtp device that wont install ? I had installed the system wide adb/fastboot drivers, and already had a folder with just the minimal install of the adb but didnt have a few files in the one you provided ( lg root, busy box, etc) so not quite sure what to do with them.
Again, if possible want to flash twrp recovery to my device but can't due to * waiting for any device* and the ( device cannot start ) error
Thanks
* waiting for device* when putting phone in download mode and pushing fastboot flash twrp-2.8.7.1-h811.img.
Any help would be appreciated as I need to get the driver to work first. see attached picture.
Cha h
the issue is largly resolved as i've been able to flash the recovery and install another rom. But i'd still like to know how to get the download mode driver properly working in the event i need a computer and can't do a self contained install.
Uninstall all drivers. Reboot computer. Reinstall latest drivers and LG bridge. Reboot. Then start your process. It'll work. Trust me. Find my posts in primes stock thread. I ran into this issue myself. And if you get an error after flashing where it won't mount /data, that's because it got corrupted. Once in twrp, format /data then reboot to recovery. All will be well to flash. Just a heads up since that was also a problem.
travisd4est said:
Uninstall all drivers. Reboot computer. Reinstall latest drivers and LG bridge. Reboot. Then start your process. It'll work. Trust me. Find my posts in primes stock thread. I ran into this issue myself. And if you get an error after flashing where it won't mount /data, that's because it got corrupted. Once in twrp, format /data then reboot to recovery. All will be well to flash. Just a heads up since that was also a problem.
Click to expand...
Click to collapse
i dont know man, i did all that a million times over, but recently i was able to just flash the stock MM rom to the device using LGup. Think i'll just stick with stock rom and root for a while as all this stuff is a little finicky at times. Thanks for your help.
I've followed all of the steps from this guide: http://forum.xda-developers.com/showpost.php?p=56938530&postcount=1
I've got to the end where I am running the code snippets to flash everything, but everything fails. The error stated is FAILED: remote failure. I am not sure if this is related to my developer options being turned off, but I think it might be.
Is there a way to turn developer options on while in fastboot mode or perhaps a way around this error? The reason I am stuck in the fastboot is because the boot image can't be validated, I am not at the fastboot by choice, haha.
No. If your recovery is still stock, flash the Android N Preview 1 OTA or an Android 6.0.1 OTA image from Google. One of those will restore your Nexus to operating condition, and from there you can try again. If your recovery is TWRP, flash a custom ROM.
Strephon Alkhalikoi said:
No. If your recovery is still stock, flash the Android N Preview 1 OTA or an Android 6.0.1 OTA image from Google. One of those will restore your Nexus to operating condition, and from there you can try again. If your recovery is TWRP, flash a custom ROM.
Click to expand...
Click to collapse
I apologize for my ignorance since this is all new to me, but could you explain a few things to me.
Is this what you're referring to when you say Android N Preview 1 OTA: 'https://developer.android.com/preview/download.html'
Secondly, in order to flash these, am I still following the steps I was before, or should I be following a new set of steps?
You don't need the N Preview anymore. Download your Android 6.0.1 image from the Google page and flash using the instructions given on that page.
I went to the page and followed the directions. Still doesn't work. The flash-all script reboots after the first two commands, which lock the phone. But even then, it is still giving the error FAILED:remote failure.
me too!
I seem to be having the exact same issue! i just bought a Nexus 6 online that wasn't booting, it would only show a green led when plugged in. so here I am doing everything I can think of to fix the issue but then I get hit with the "remote failure" when i try to oem unlock the bootloader! (and since the phone wont't boot i can't check the "unlock bootloader" box in the developer options) so yeah I am going to keep researching this but if anyone has any good ideas about to get around the bootloader being locked please jump right in.
anyways I may have deeper issues, the battery will not charge. i know this because when i load up the fastboot menu, which i have to do by holding the buttons while plugging it in, it should say battery charging but all it says is battery ok
I also can't load recovery because when im in the fastboot menu and i choose recovery the phone freezes and the green led comes back on... *sigh*
They have the full ota packages posted on Google site now you can and push through the stock recovery
Here just make sure you get the shame version
https://developers.google.com/android/nexus/ota#hammerhead
Sent from my Nexus 6 using XDA-Developers mobile app
I have the OTA. I also installed Wugs toolkit.
My phone is in fastboot mode due to the boot image not being able to be validated. I didn't voluntarily open up fastboot using the shortcut.
The phone is UNLOCKED until bootloader is rebooted, then it is LOCKED. If I click start, it becomes UNLOCKED again. Wug's toolkit tries to UNLOCK the phone even while the phone says it is UNLOCKED. I don't think the phone is actually UNLOCKED, however whenever it tells me it is UNLOCKED, I try to proceed with flashing and it gives me a remote failure message on each command.
The next thing I am going try is the drivers and Wug's toolkit has a driver option, so I will try that. Besides the drivers, any other ideas?
You seem to be inexperienced in rooting Android devices. If you aren't, I apologize for the assumption. However, you should learn how to use adb and fastboot without relying on the toolkit. Toolkits tend to hide diagnostic messages that adb and fastboot generate while running. This missing information makes solving problems much more difficult.
Strephon Alkhalikoi said:
You seem to be inexperienced in rooting Android devices. If you aren't, I apologize for the assumption. However, you should learn how to use adb and fastboot without relying on the toolkit. Toolkits tend to hide diagnostic messages that adb and fastboot generate while running. This missing information makes solving problems much more difficult.
Click to expand...
Click to collapse
I am inexperienced, I stated that earlier. I have check a bunch of different forum posts and a bunch of different guides. Nothing seems to be helping and it seems like such a simple problem, a boot image that can't be validated. I am not trying to do anything special with my phone, I am just trying to get it to work. I woke up and it was stuck in this 'AP Fastboot Flash Mode (Secure)' mode. It is very bare bones, not even similar to the screens within videos I have seen. One moment the phone says it's UNLOCKED, the next it's LOCKED.
You are the expert, I am not. I am merely following your directions and they don't seem to be working. I did some outside research, came to a toolkit. Toolkits are great for beginners, especially since they are UI built, are built by someone who knows the area of interest, which makes researching easier and more efficient, but on top of that, it seems to be getting me much farther than your advice, although nothing is successful at this moment.
Here is a little more context into my situation. My phone seems to be recognized by Fastboot, but not ADB (From what I found, fastboot will find devices in fastboot, and adb will find devices functioning normally, don't know how true that is.). In addition, my phone seems to switch from UNLOCKED TO LOCKED after reboots, but can become UNLOCKED again if I push ANY button. Every command I issue (i.e flash bootloader, flash radio, flash system, flash userdata) result in the message, FAILED:remote failure, which I am not sure how to avoid (I have googled, checked these forums, checked other forums and there doesn't seem to be much, if any documentation on the error), but I think it is related to the fact my developer options are turned OFF. My next course of action is to install new drivers (I checked my drivers which are said to be up to date, I also installed google USB driver through the sdk, but now I am going to look into an adb or universal driver?) and attempt to rerun everything successfully.
If you have any other ideas, or don't think its the drivers, feel free to bring it up.
As a couple of fellows said before, try this:
https://developers.google.com/android/nexus/ota
Flash a FULL OTA from the link above, not a factory image. To flash any OTA you don't need to be unlocked. I think you might be confusing the terms (with the OTA you don't have to flash anything using fastboot)
In the link there are the instructions, it's pretty straight forward and easy if you have the correct drivers installed.
OTA requires that u can startup into recovery, I cannot I can startup fastboot through key combo but when I go to select recovery the green led comes back on and the screen displaying the fastboot options remains static
I think the phone freezes because it does not appear to be able to use the battery. though there is a firm battery connection it will not charge or power on without being plugged in. maybe when I select recovery I can quickly unplug and replug the USB and maybe hold the power button to try to simulate a successful reboot.. idk just thinking aloud and working with what I got..
I also can not start in recovery mode and the OTA requires ADB, which isn't recognizing my device. I have also stated that I have followed those instructions, and nothing resulted from them, except the same messages I have been stating these last few posts.
I will try this first chance I get later tonight..
http://forum.xda-developers.com/nexus-6/help/solution-stuck-bootloop-locked-t3053783
Listen the ota doesn't get installed through fast boot, you have to select recovery through the fast boot then install the update by pushing it as bootloader does not need to be unlocked!
Sent from my Nexus 6 using XDA-Developers mobile app
holeindalip said:
Listen the ota doesn't get installed through fast boot, you have to select recovery through the fast boot then install the update by pushing it as bootloader does not need to be unlocked!
Sent from my Nexus 6 using XDA-Developers mobile app
Click to expand...
Click to collapse
Ok, well it seems we are at an impasse. You seem to think I can do something, so I am going to show some pictures of my screen. Its going to be blurry because I had to take it with my computer, so I apologize, but I will elaborate on each picture.
Qwertyismypw said:
Ok, well it seems we are at an impasse. You seem to think I can do something, so I am going to show some pictures of my screen. Its going to be blurry because I had to take it with my computer, so I apologize, but I will elaborate on each picture.
Click to expand...
Click to collapse
The first two pictures are when the phone is 'UNLOCKED'. The second two pictures are when the phone is 'LOCKED'. The moment I press anything in 'LOCKED' mode, the little android man goes away, and it becomes the first two pictures. WHENEVER I push a button in 'UNLOCKED' mode, nothing happens, except in the bootloader logs screen says, 'FAILED TO VALIDATE BOOT IMAGE RET -1'. I have done everything on that OTA page in every way possible. It has done me no good.
Ok, I made a little progress I think. Wugs toolkit allowed me to use TWRP on my phone and ADB is recognizing my phone now. There are a lot of options within TWRP though, so I am going to look through them all for anything relevant. Anything I should keep an extra eye out for?
If you can use twrp just download a custom ROM to your phone and move it over to SD card and flash it, then you will be able to boot and unlock the bootloader in developer ootions, that is your best bet, if you keep getting force closes after flashing a custom ROM your going to have to do a factory reset from within twrp
Sent from my Nexus 6 using XDA-Developers mobile app
holeindalip said:
If you can use twrp just download a custom ROM to your phone and move it over to SD card and flash it, then you will be able to boot and unlock the bootloader in developer ootions, that is your best bet, if you keep getting force closes after flashing a custom ROM your going to have to do a factory reset from within twrp
Sent from my Nexus 6 using XDA-Developers mobile app
Click to expand...
Click to collapse
I don't have an SD card, can I move it to the internal storage? And how exactly do I do this? I can't copy/paste anything into the phone (it says the phone doesn't actually exist, even though adb is recognizing it as in recovery) or do I sideload it? When I try to sideload it though, the device disappears (and device manager sees nexus 6 under other devices, but the driver isn't up to date and no drivers seem to work. I've tried the google usb driver with no luck.) and it won't allow me to sideload it.
So i had this HTC One M7 given to me by a friend, it was running CM 10.2 and TWRP V2.6.3.0 and long story short after a series of unfortunate events. the phone is running TWRP and TWRP alone with no backup, no OS, and nothing is installing. Ill include a list of all the ROM's I tried to flash and none of it wanted to work. I'm sure a big part of it is the fact that TWRP is fairly outdated, but other than that I'm grasping at straws. So, after 18+ hours of YouTube, Google, and Here. I decided I'd make an account and pose the question to you guys.
ROMS ATTEMPTED
cm-12.1-20150907-NIGHTLY-m7
cm-13.0-20160103-UNOFFICIAL-m7
m7ul_signed_111713_171951
OTA_M7_UL_K443_SENSE60_MR_HTC_Europe_6.09.401.12-6.09.401.11_release_405793rqmzqfwp2gow8yjo
SkyDragon+GPE501+M7+V6.0.0
SkyDragon+M7+GPE51+V7
aokp_m7_mm_unofficial_2016-10-13_1006
I've had to fastboot install pretty much all of that as well as the about 3 hours that went into trying to update TWRP with no avail there either. Honestly, im kinda ready to just farm this out. Any help is appreciated and i will respond to any and all questions if it helps. btw the main error i was getting was the "E: Error Executing Updater Binary in Zip" the only ones that had a different error that i know of were the SkyDragon ones that gave me Installer 7
Flash new TWRP (3.1.1-0) https://dl.twrp.me/m7/
---------- Post added at 12:30 PM ---------- Previous post was at 12:29 PM ----------
If it will not work, try RUU.
mr_connormac said:
So i had this HTC One M7 given to me by a friend, it was running CM 10.2 and TWRP V2.6.3.0 and long story short after a series of unfortunate events. the phone is running TWRP and TWRP alone with no backup, no OS, and nothing is installing. Ill include a list of all the ROM's I tried to flash and none of it wanted to work. I'm sure a big part of it is the fact that TWRP is fairly outdated, but other than that I'm grasping at straws. So, after 18+ hours of YouTube, Google, and Here. I decided I'd make an account and pose the question to you guys.
ROMS ATTEMPTED
cm-12.1-20150907-NIGHTLY-m7
cm-13.0-20160103-UNOFFICIAL-m7
m7ul_signed_111713_171951
OTA_M7_UL_K443_SENSE60_MR_HTC_Europe_6.09.401.12-6.09.401.11_release_405793rqmzqfwp2gow8yjo
SkyDragon+GPE501+M7+V6.0.0
SkyDragon+M7+GPE51+V7
aokp_m7_mm_unofficial_2016-10-13_1006
I've had to fastboot install pretty much all of that as well as the about 3 hours that went into trying to update TWRP with no avail there either. Honestly, im kinda ready to just farm this out. Any help is appreciated and i will respond to any and all questions if it helps. btw the main error i was getting was the "E: Error Executing Updater Binary in Zip" the only ones that had a different error that i know of were the SkyDragon ones that gave me Installer 7
Click to expand...
Click to collapse
To update twrp, you only need to flash the latest version over the old.
Code:
fastboot flash recovery file_name.zip
fastboot erase cache
fastboot reboot-bootloader
And yes you're right, your twrp is really outdated and nothing will flash with this old version. Pretty much all roms you've listed here need the new "by-name" fstab symlinks implemented in twrp 2.7.1.1. So flash the latest twrp as recommended by the other member above.
And btw files with name starting with "OTA_M7" are not roms and can't be flashed from twrp. These are over-the-air updates, not complete roms, only patches for stock rom. So nothing useful for you.
Couple problems:
Fastboot mode was on, cmd "fastboot devices" drops down to the folder extension like i never typed anything. "fastboot" in red on Handset.
then every time i try to flash it says "waiting on device" indefinitely. If this problem was as easy as flashing and turning it on and off i'd have it done. There is NO way of enabling USB Debugging because i would have to be able to boot into and OS which there is none. the way this all seems to me is that doing anything to this phone as it sits is a catch 22.
Device is "S-On" as well
EDIT: I'm referring to flashing TWRP here not any of the ROM's or RUU's I mentioned before
mr_connormac said:
Couple problems:
Fastboot mode was on, cmd "fastboot devices" drops down to the folder extension like i never typed anything. "fastboot" in red on Handset.
then every time i try to flash it says "waiting on device" indefinitely. If this problem was as easy as flashing and turning it on and off i'd have it done. There is NO way of enabling USB Debugging because i would have to be able to boot into and OS which there is none. the way this all seems to me is that doing anything to this phone as it sits is a catch 22.
Device is "S-On" as well
EDIT: I'm referring to flashing TWRP here not any of the ROM's or RUU's I mentioned before
Click to expand...
Click to collapse
If you can only see "fastboot" in red instead of "fastboot usb" then there is no data connection between your phone and your computer. Make sure you are using the original usb cable (or any other usb cable already known to work for data transfer, there are some usb cable that will only provide power) and try different usb ports.
USB debugging is not required, the only purpose of this option is to enable ADB connectivity from a booted rom. FASTBOOT connectivity form bootloader will always work no matter if adb debbug was on or off.
Unfortunately this old version of TWRP doesn't have the (not so)new option to update TWRP from TWRP (implemented in 2.8.4.0) so you must flash from fastboot...
Hi guys, I got a new XT1900-7 today, tried to install TWRP but I'm not able to boot it with "fastboot boot boot.img".. Yes the bootloader is unlocked, cmd is running as admin, adb and fastboot stuff is correctly installed, motorola drivers are installed, tried different cables and ports... I don't get it why it does not work and I'm absolutely NOT new to this business... Additional info: Running OPWS27.2.4, patch level August 1, 2018.
See the cmd screenshot below, it freezes there... Any help is much appreciated, absolutely don't know what is going wrong here!
Zokhii said:
Hi guys, I got a new XT1900-7 today, tried to install TWRP but I'm not able to boot it with "fastboot boot boot.img".. Yes the bootloader is unlocked, cmd is running as admin, adb and fastboot stuff is correctly installed, motorola drivers are installed, tried different cables and ports... I don't get it why it does not work and I'm absolutely NOT new to this business... Additional info: Running OPWS27.2.4, patch level August 1, 2018.
See the cmd screenshot below, it freezes there... Any help is much appreciated, absolutely don't know what is goind wrong here!
Click to expand...
Click to collapse
What's the file size of your boot.img? It should only be about 30 mb. It's not frozen it's still attempting to transfer the img to your device.
ptn107 said:
What's the file size of your boot.img? It should only be about 30 mb. It's not frozen it's still attempting to transfer the img to your device.
Click to expand...
Click to collapse
Thanks for your reply, the file sizes are correct, I tried these from twrp download page: twrp-3.2.3-1-payton.img (29.5M) and twrp-3.2.3-0-payton.img (25.9M) - same result.
Zokhii said:
Hi guys, I got a new XT1900-7 today, tried to install TWRP but I'm not able to boot it with "fastboot boot boot.img".. Yes the bootloader is unlocked, cmd is running as admin, adb and fastboot stuff is correctly installed, motorola drivers are installed, tried different cables and ports... I don't get it why it does not work and I'm absolutely NOT new to this business... Additional info: Running OPWS27.2.4, patch level August 1, 2018.
See the cmd screenshot below, it freezes there... Any help is much appreciated, absolutely don't know what is goind wrong here!
Click to expand...
Click to collapse
I have a laptop that doesn't work with fastboot, but adb is fine. Same cable and phone on a different computer and fastboot works. Maybe try a different computer?
gee one said:
I have a laptop that doesn't work with fastboot, but adb is fine. Same cable and phone on a different computer and fastboot works. Maybe try a different computer?
Click to expand...
Click to collapse
Will give this a try tomorrow, thanks a lot!
Edit: Still no luck. Tried it with linux mint and even there the same sh!t... wtf
Ensure Motorola drivers are up to date and even try a different USB port.
With Windows, does it see the phone in device manager while in fastboot?
Neffy27 said:
Ensure Motorola drivers are up to date and even try a different USB port.
With Windows, does it see the phone in device manager while in fastboot?
Click to expand...
Click to collapse
Latest drivers from Motorola Device Manager are installed and phone is properly recognized in device manager (used usb 2.0, 3.0 and 3.1 ports, nothing changes, same behavior). I tried it now with mfastboot but still nope..
Are you using minimal or full sdk (by Google) platform tools?
Neffy27 said:
Are you using minimal or full sdk (by Google) platform tools?
Click to expand...
Click to collapse
Minimal, I have also a Moto G5 and I don't face this kind of problems - only with Payton.
I recommend switching to full sdk. You don't have actually download all the packages, just the platform tools and it keeps itself updated. I stop encountering these random issues when I switched from minimal two phones ago. Issues like yours are; 9 out of 10, driver issues.
---------- Post added at 06:13 PM ---------- Previous post was at 06:13 PM ----------
The very next thing to try, would be reflash everything.
Good luck.
Neffy27 said:
I recommend switching to full sdk. You don't have actually download all the packages, just the platform tools and it keeps itself updated. I stop encountering these random issues when I switched from minimal two phones ago. Issues like yours are; 9 out of 10, driver issues.
---------- Post added at 06:13 PM ---------- Previous post was at 06:13 PM ----------
The very next thing to try, would be reflash everything.
Good luck.
Click to expand...
Click to collapse
Unfortunately still no progress with full sdk and latest platform-tools, I'm giving up (for now).. I don't get it man, I'm not able to do anything in bootloader... for example when I try "fastboot flash partition gpt.bin" it freezes at sending OR it throws instant failed, the bootloader log menu shows that something is downloading but nothing happens... I relocked the bootloader (locking and unlocking is no problem) again and I am going to use it for a while... otherwise I will do a mistake somewhere and will brick it... Thanks for taking the time to help me haha
I'm having this same exact issue, just got this phone (XT1900-1) for my wife and she wants a custom rom, my own phone booted into twrp no problem.
https://forum.xda-developers.com/moto-x4/how-to/guide-how-to-flash-official-factory-t3808348
Maybe try the fastboot in that link. I read through the thread and no specific reason why they suggest that version but it allowed people to flash back to stock. I used it last week to go back to stock before Lineage.
No effect still stuck on "downloading 'boot.img'..." but thank you, should I try flashing TWRP without booting? Would that even work?
or maybe an alternative way to get TWRP like a rooting method or the such?
Edit: Im going to try a factory reset, who knows maybe itll work?
^Nope
Edit 2: ERRR ota update is also failing to install, all I did was unlock the bootloader, havnt been able to do anything else.. wtf is going on.. What should I do from here, lock the bootloader and try ota again?
Edit 3: Something strange is going on, the fastboot commands are failing randomly I just noticed, see the attached image... Im spamming the same exact command once every second and it intermittently works.
Sorry, beyond my expertise. Maybe it's USB c port on the phone issue? Intermittently dropping the connection? Or have to tried flashing the 8.1 sick from the thread I posted? Maybe the factory ROM is messed up some how. I honestly don't know and those suggestions aren't based in any real knowledge.
Code:
fastboot version 1:7.0.0+r33-2
Android Debug Bridge version 1.0.40
Version 4986621
In linux mint do you have the same versions of the tools as above?
Slayer5934 said:
No effect still stuck on "downloading 'boot.img'..." but thank you, should I try flashing TWRP without booting? Would that even work?
or maybe an alternative way to get TWRP like a rooting method or the such?
Edit: Im going to try a factory reset, who knows maybe itll work?
^Nope
Edit 2: ERRR ota update is also failing to install, all I did was unlock the bootloader, havnt been able to do anything else.. wtf is going on.. What should I do from here, lock the bootloader and try ota again?
Edit 3: Something strange is going on, the fastboot commands are failing randomly I just noticed, see the attached image... Im spamming the same exact command once every second and it intermittently works.
Click to expand...
Click to collapse
Had exactly the same behavior like you (especially Edit 3), I tried it on a different computer from 2013 with usb 2.0 ports and it worked..
No other cable, no usb port, no adb and fastboot changes and no other drivers - just put all the stuff on a other computer and run the commands from there :good:
ptn107 said:
Code:
fastboot version 1:7.0.0+r33-2
Android Debug Bridge version 1.0.40
Version 4986621
In linux mint do you have the same versions of the tools as above?
Click to expand...
Click to collapse
Yeah, I'm on 1:7.0.0+r33-2 too.. I guess it has something to do with my mainboard or usb controller, weird weird weird
A different pc solved the issue.. wtf.. thank you..
I have the exact same issue, random commands are failing. I tried 2 different computers, Linux and Windows. It just hangs at downloading boot.img. Flashing either immediately fails or hangs and I can't ctrl-c to kill the process, have to disconnect my phone.
dirktacular said:
I have the exact same issue, random commands are failing. I tried 2 different computers, Linux and Windows. It just hangs at downloading boot.img. Flashing either immediately fails or hangs and I can't ctrl-c to kill the process, have to disconnect my phone.
Click to expand...
Click to collapse
Yeah I wish we knew the exact problem and solution but you might just be stuck trying new computers for eternity sadly..