Related
How can I access the /data/ partition?
I was using the touchpad, installed some apps like teamviewer/unified remote/xbmc from the market, and all was going well and then for no reason the tablet froze, CM9 just stopped responding. So I rebooted it (holding the home button and power button was the only way to get it to do anything) but it's stuck at the Cyanogenmod boot animation. It's been on that animation for 5-10 minutes, so I rebooted again, went into clockworkmod and reflashed the latest nightly and gapps. I then rebooted, android booted up, said it was upgrading/optimizing 77 something apps, then it said it was starting the apps, and then it froze at that point, wouldn't proceed. I then reboot and am stuck at the boot animation again. My best guess is that one of the apps I installed is hosing it. I plugged the usb cable in and normally during the boot animation of my phone I can adb logcat but I can't seem to adb detect this device during boot animation. Windows see's it as a MTP device but no filesystem comes up in my computer. So adb logcat and adb shell so I can get into /data/app to wipe out the last few apps I installed won't work, but on my phone I can also adb shell in from CWM. So I rebooted into CWM but when I connect the cable to the laptop it still doesn't see it as an Android ADB device. No adb shell. Not like my phone at all.
So back to my original question, short of wiping /data from CWM, is there anyway for me to get at /data/app to delete some files? I'm curious what's causing this.
You can do an and pull from clockwork mod or have you tried mounting it on the computer from the clockwork mod options?
I've mounted before in clockwork but only sdcard, so that i can put a zip on it to flash. Can you also usb mount the /data partition?
Sent from my SGH-I777 using XDA
If you can reboot into WebOS, I know a way you can mount it and grab what you need.
Boot into WebOS, and connect your tablet to your PC. Then start up Novaterm (C:\Program Files\Palm, Inc\terminal\novaterm.bat). Connect to your tablet.
From there, you'll be at a root prompt. This is good. Type the following commands:
- mount /dev/mapper/store-media /media/card
- mount /dev/mapper/store-cm--data /media/hdd
- cd /media/hdd
- mkdir /media/card/cmdata (this will make a backup folder for you)
From there, you can use basic linux commands to copy files from your data partition to your media card. The ones you should need (forgive me listing the extra commands, even if you know them):
- ls (LS) will give you a directory listing
- cp -r <Folder> /media/card/cmdata (this will backup whatever folder you wanna backup to the cmdata on your card)
- rm -r <folder> (this will remove whatever folder you wanna remove)
- rm <filename> (this will remove whatever file you wanna remove)
I just tested this method, and it allows you to back up whatever you want, as long as you can get into your /data partition. You can do whatever you need to do. Just be careful you don't remove something you don't have to.
Hope this helps you, mate. If so, hit Thanks, if not, drop me a PM and we'll discuss other options.
glitchsys said:
I've mounted before in clockwork but only sdcard, so that i can put a zip on it to flash. Can you also usb mount the /data partition?
Click to expand...
Click to collapse
Yes, you can, but you can only read it from a Linux PC. A Windows system will not be able to access the partition, because it is an ext3 filesystem.
You can also use the "USB mode" used to install CM, but it will run into the same problem. Without Linux, you will not be able to access files.
I would clear the cache, that usually seems to solve these kind of issues. (Of course it could also mess it up further...)
Hi all, I wrote a long-winded Tutorial to put Evervolv KitKat on a stock N1. I don't have a stock N1 (I stumbled all the way through this process and got done yesterday, was so excited I wrote this tutorial) and don't know how to get it back to stock, so I'm wondering if anyone who has one and has experience putting new ROMs on other devices would like to test this out and let me know if anything doesn't work as written. Please go ahead if you like and reply your updates! Once it's dialed I'll make it a thread in the N1 ROMs forum.
Here's the text:
How to put KitKat on a Nexus One (And have computing power & space to spare):
Things you'll need:
1. A Windows/Linux computer with internet connection, USB port, and terminal
2. A USB Cable
3. A Nexus One with the most recent stock gingerbread rom (Settings->about, look for Android 2.3.6 or GRK39F, else apply/google updates to get to that version)
Before you begin, note that you're playing with a generally safe form of fire, but when playing with fire, you may brick your phone. The maker of this guide and any sites you visit during the process assume no responsibility, the user assumes full responsibility for lost work and damaged or ruined phones. Your warranty will be voided about six times over. Save all your stuff somewhere, save apps with Titanium Backup (Google it) or something, and do a full Nandroid backup (Goog that too) before you begin. You will be fully wiping your phone and SD card multiple times. Make sure at every step of the process that your battery is at least half full. Running out of battery during an update can cause bricks. In this guide, “Boot” means standard boot, the way it normally turns on. Not hboot or fastboot or recovery.
I did part of this from a Windows7 computer on Cygwin and part on Ubuntu 12.04, each presented some annoyance but by far the greatest was due to my Linux ineptitude with PATH and Root. If you're trying the same, I've made an appendix for that.
It may help to have a brief conceptual overview of what you'll be doing in case you run into snags and have to step out of the walkthrough. Your N1 has a few basic parts: Internal memory that is chopped into 3 partitions: One for the system files (System) , one for the files that they will need to make during the first bootup and use in order to operate, along with your apps and their created files (Data) and one for temporary files that your OS and apps can regenerate (Cache). Somewhere in there it also has space for a Radio (that also includes some critical power functions, flashing a new radio is the easiest way to brick an N1 but we won't), as well as a Recovery partition and an Hboot&Fastboot partition. We will be messing with Recovery and Hboot. The virtual machine that turns all the friendly pseudo-english computer code into 1s and 0s for the processor to deal with is called Dalvik, named after a town in Iceland where some old dev's family is from. It has its own Cache (the VM, not the town, as there are no longer any fish in Iceland ). It's SOP to wipe Cache & Dalvik before and after applying any updates, and wipe Data (Factory reset) before applying most updates. Sometimes when my phone bogs I reboot to recovery and wipe caches just for funsies. This makes it take longer to boot the phone and to use each app just the first time after that, while the files are created fresh. The phone also should have an SD-Card. You should have or buy an 8+MB, Class 10 SD card. The class relates to read/write speed, anything less than 10 will noticeably slow your Nexus One's operation. Why?
Because we're going to put some of your operating system on the SD card. We're going to use a special recovery system (aka recovery ROM) called “4ext” to partition your SD card. Mine is 16GB, partitioned to 14GB for storage and 2GB to use as fake internal memory, where my system's Data and Cache live. The KitKat System files that normally live on internal memory's System partition are too big for a normal N1, so we'll use a special Hboot called BlackRose to repartition your internal memory so you can fit KitKat, and then after you first boot it up we'll use an app called Mounts2SD to install a startup script so that every other time you boot it up after that, it will know to find Data and Cache on the SD card. In order to install BlackRose, you'll need to be running CyanogenMod Rom as your main OS, and in order to do that you'll need ClockWorkMod Recovery ROM. So the installation order will be: ClockworkMod recovery->Cyanogen7OS (Gingerbread based)->4ext recovery to partition SD card->BlackRoseHboot to repartition internal memory->Evervolv KitKat-based N1 ROM-> run Mounts2sd for startup scripts ->reboot to your new life among the anatomically modern cyborgs (and then you're on your own for getting all your apps and music and contacts and stuff back on the phone from wherever you saved it).
Ready? Here we go!
1. Install the Android SDK on your computer.
1. Get the appropriate version here: http://developer.android.com/sdk/index.html
2. Unzip it.
3. Run the setup.exe (if using windows)
4. When asked which packages to install, choose “Android SDK Tools”, “SDK Platform Android 2.1″, and “Usb Driver package” (If you use eclipse, check that last link for instructions on using the ADT plugin (Not the same ADT that cuts your paycheck, much less inept))
5. Make sure the USB drivers installed properly (windows).
1. Go to printers and devices in the control panel, or device manager
2. If you see an android device with no warnings, you're golden. If it has warnings, right click it and go properties->update driver (driver can be found in your android sdk directory where you unzipped the sdk bundle, in \usb_driver).
6. Boot up your N1 and plug it in to the computer. If the computer recognizes it and they play nice, you're set with the sdk. To extra check, open terminal and cd to the sdk's platform-tools folder that should contain the adb utility. Type #adb devices and see if it comes up with a message telling you that it's running a daemon on a port like 5037, and then lists something like HT9CPP800063 device. This is your phone, it's telling you you're beyond connected. You've got the sdk working. Else have your friend Google help you get the SDK properly installed.
2. Root the phone so it will let you dig in.
1. Put your N1 in USB debugging mode (Settings > Applications > Development > USB Debugging)
2. In the terminal, in the platform-tools folder, type #adb reboot bootloader. (((My phone has a power hardware issue and will not reboot while plugged in ever to any mode ever at all ever, if yours does too you can unplug (first type #adb kill-server to make it ok to unplug) the usb cable, power down, wait five seconds, and hold the trackball and power button to power back up into the bootloader, then plug in again. There was a lot of unplugging, waiting fifteen seconds, booting while holding buttons, plugging in, adb devices -ing that I will omit henceforth due to low likelihood that you have the same problem.)))
3. Using the onscreen directions on the phone and the hard buttons, navigate to fastboot mode. It may be unresponsive and throw some not-found messages for five seconds before it lets you do anything.
4. In the terminal on your computer, in the platform-tools folder, type #fastboot devices to see if your devices is connected (it should come up with the same HT#XXX###### number).
5. This step will gain Root access, unlock the bootloader, and WIPE ALL YOUR ****. Now type #fastboot oem-unlock . You may have to accept the warranty voiding. If for whatever reason it doesn't work, use this method http://code.google.com/p/bexboot/, and unzip the files to the platform-tools folder.
6. Using the phone buttons, reboot. Your little lock logo during the bootup should be unlocked now.
7. Power down and boot again for good measure. Re-enable usb debugging in the phone app dev settings.
3. Get ClockworkMod Recovery.
1. Download koush's ClockworkMod Recovery from : recovery-clockwork-5.0.2.0-passion.img and put it in the platform-tools folder.
2. To make sure the file is not corrupted and will not brick your goods, check the md5sum. This is the result of a complicated equation that easily reveals even a single flipped bit in the file by vastly changing the output. Google how to do this, in windows you'll need to download a tool like winmd5free. The output for this particular file should be: md5: 45716c8d51ed2375873f01f0b14b2184 If it's anything else don't use it.
3. Reboot to the bootloader again, either by #adb reboot bootloader or by powering up while holding the trackball, and navigate to fastboot.
4. Verify that you're connected with #fastboot devices
5. Flash ClockworkMod Recovery by typing #fastboot flash recovery recovery-clockwork-5.0.2.0-passion.img
6. It should give a success message. Reboot to recovery from the fastboot menu. It should be a sweet new blue and white ClockWorkMod recovery. Power down and reboot to recovery by holding volume up as you power up, just for good measure.
4. Get CyanogenMod7 ROM.
1. On your computer, go to http://download.cyanogenmod.org/?device=passion&type=stable and download the latest stable CM7 zip. Put it in the platform-tools folder.
2. Check its md5 as you did in part 3.
3. Do #adb-devices, which should give you that serial again, and the word recovery.
4. Place the zip file on the root of your SD card by doing #adb push cm-7.2.0-passion.zip /sdcard/
5. If that last step failed, try running #adb shell mount /sdcard or #adb kill-server then #adb devices then #adb shell mount /sdcard, then try the push again. Or mount the sdcard through the recovery menu before running that push command. Or use your computer's file system to drag and drop the .zip to the root (lowest) folder of the sd card.
6. Using the recovery menu, in backup and restore options, backup your current ROM.
7. In the format menu, do a wipe data/factory reset. Wipe the cache and dalvik cache while you're at it.
8. Back in the main recovery menu, do install zip → choose zip from sd card.
9. Select that CM7 zip file.
10. Return to the main menu and reboot the system. It should come up with a totally different looking leaner meaner version of Gingerbread, that gives you more control and speed and saves battery. But even with this system, given modern app sizes, you'll soon run out of room on the internal memory if you stop now. And besides, you're having too much fun.
5. Get 4EXT recovery
1. Go to 4ext.net and download the free .apk file: http://www.4ext.net/get.php?apk Congratulations if you're about to install your first not market app (apps are now .apk, not just something you get from the store's GUI.). Save it in platform-tools. Or, to be really nice to Max, you can just buy the app in the play store and skip the next two steps.
2. Enable USB debugging, plug in and #adb-devices.
3. # adb install 4EXTRecoveryUpdater.apk. You should get back a success message in a fistful of seconds.
4. At this point you may need to back out to regular settings, turn on wifi, and hook up to your wifi router.
5. Open the 4ext recovery updater app. Go to settings. Allow superuser permissions and everything else. It should detect Nexus One, connect to the internet, and boot you back to the main menu.
6. Go to online install. They're all release candidates and no stable versions, so just go with the newest one. Select install.
7. Wait for it to finish and then reboot to recovery, either by # adb reboot recovery or manually. You should have a beautiful new touchscreen recovery.
6. Partition your SD Card
1. In recovery, go to tools->partition sd card->remove all partitions and start from scratch.
2. For the first Ext partition, where you'll be keeping a good chunk of your OS, The consensus online is not to go above either 1.5GB or 2GB. I'm working fine with 2GB aka 2048MB.
3. You can skip the 2nd Ext partition.
4. The internet says Swap size should be 0.
5. Internet says File system should be ext4. This should do the partitioning, the rest of your SD card will still be great for storage as before.
7. Repartition internal memory using BlackRose:
1. I have never used BlackRose on Windows, but here goes: go here : http://forum.xda-developers.com/showthread.php?t=1270589 and download this zip archive: http://forum.xda-developers.com/attachment.php?attachmentid=1016437&d=1334971685; It has windows and linux files. The site also has a manual in case this walkthrough lets you down.
2. Unzip it into a folder in your platform-tools. Execute it with a ./ in linux or a .exe in win. It should say waiting for devices.
3. Reboot your phone manually. BlackRose should hijack the startup, install itself, and quit. Boot your phone up again.
4. Blackrose is rumored to have an interactive guide to partitioning, but it didn't work for me and at least some other genius on the internet, but being an industrious Austrian, he figured out the fix: Run Blackrose in Editor mode. Type resize as prompted.
5. The post here http://forum.xda-developers.com/showthread.php?t=2540366 on Evervolv KitKat implies that 250MB for System works with enough space for Gapps (Google does not allow their standard apps like Play Store to be included with Mod roms anymore, so you will need to install them from recovery too, but they distribute them bundled so it's not hard.), and some commenter said 260MB, but that didn't work for me long enough to run startup scripts and move some of it off. So I had to redo it and I went with 265MB for System and 10MB for Cache, which is working fine. Give it a name, I went with Kat.
6. BlackRose will shut down, but it will leave a golden turd in the form of a file called hboot_brcust.nb0 probably in the folder called “other.” That's what you want.
7. Put that file in the same folder as the Blackrose utilities fastboot-l and fastboot-w if it's not already there. Then boot your phone into fastboot again, via adb or manually. I think. Maybe try this from being standard booted up if the next part doesn't work.
8. Run # fastboot-l flash hboot hboot_brcust.nb0 . Windozers should use fastboot-w instead. Blackroot will wait for the device again.
9. Reboot your phone into the bootloader manually, by holding the trackball while powering up. The image should install on this boot, resizing your phone's internal memory partitions.
10. Run # fastboot -w. Your Bootloader should be loaded up, with the 1st line saying something about BlackRose and the 2nd line saying 265/10/161. This is how you know it worked. That 265 is where it's at for KitKat. Your main OS had been destroyed, but your Recovery ROM should still work.
8. Install Evervolv KitKat.
1. Go here http://evervolv.com/devices/passion and download the latest stable release. At press time that's the 4.0.0p4.2 version. Save it to platform-tools.
2. Reboot to Recovery from the menu in the BlackRose bootloader.
3. Do # adb devices. Then do # adb push ev_passion-4.0.0p4.2-perdo-squished.zip /sdcard/ . If it doesn't work, try using the touch recovery menu to toggle mount USB, then push, then unmount. Or mount USB, use the computer's file system to move the file to the root of the sd card, then unmount USB. Or try as root if you're using linux.
4. From the main recovery menu, select install zip from SD card → choose zip → select the ev_passion-4... zip. Wait up, it could take a while.
5. Success!! Right? Right. #adb kill-server, you can unplug now and won't need to plug back in! Reboot the phone, you're getting perilously close! This boot could take five plus minutes, or just one, but be patient.
9. Install Gapps.
1. You are such a lucky dog. Gapps bundled updates are available through the Evervolv toolbox. So you can get Play Store and everything else will come easy. Go to settings → wifi, turn it on, hook it up to your wifi router.
2. Back up to settings, and go Evervolv Toolbox → Updates and swipe over to the Gapps section. Tapp the most recent Gapps-kk zip. Tap the down arrow to download.
3. Reboot manually to recovery.
4. From the main recovery menu, select install zip from SD card → choose zip → select the gapps-kk... zip. This could also take a sec.
5. Reboot again! You're almost done! When it's all loaded up, Play Store should now be installed, as well as various google options that you can enable through the Evervolv settings.
10. Install Mounts2sd.
1. Go to the Play Store and get Mounts2sd.
2. Hit the top right corner for application settings. You'll need to install a startup script. Agree, give it permanent superuser status.
3. Reboot.
4. Go back into Mounts2sd, and go to the Tool menu (Wrench). Note that boxes aren't checked unless they're green-checked.
5. Enable the Cache to move cache partition to data or sd-ext. Storage threshold is up to you. Make sureApplications, Libraries, Data, and Media are all checked. Dalvik should stay unchecked, System apps can too.
6. Reboot again.
11. You're done!!! Or at least we're done. You still have to restore your apps and put all that music back on and figure out how to resync your contacts and... Good Luck.
12. If you want to get extra tricky, it's believed to be possible to leave app data on the real internal memory by default, and use Titanium Backup to move the data of most of your apps to the SD-ext, thereby leaving the data of your favorite apps on real internal memory. Use at your own risk.
ENJOY!!
Appendix 1:
Linux PATH env: I put all my android stuff in a file called androidy, so my path to my platform-tools was /androidy/adt/sdk/platform-tools, and my blackrose was in there too. So to set my PATH, I used: $ export PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/home/sean/androidy/adt/sdk/platform-tools:/home/sean/androidy/adt/sdk/platform-tools/blackrose_120421/binary"
In order to make sure that while using it as root (as was necessary for some fastbot operations), I referenced the same PATH instead of the messed up root PATH, I used sudo env PATH = $PATH a few times.
Appendix 2:
The only actual bug I've noticed in a few days with this ROM is that my Chrome bookmarks don't add shortcuts to the homescreen when I tell them to from within Chrome. The widget-adder (longpress homescreen) has a bookmark option though, so if you bookmark it you can put it on the homescreen from there.
Huge Thanks to everyone involved with ClockworkMod, Cyanogen, 4Ext, BlackRose, and Evervolv!
Sources:
http://wiki.cyanogenmod.org/w/Install_CM_for_passion
http://nexusonehacks.net/nexus-one-...n-how-to-unlock-bootloader-on-your-nexus-one/
http://marian.schedenig.name/2012/07/22/installing-android-4-ics-on-the-google-nexus-one/
http://forum.xda-developers.com/showthread.php?t=2540366&page=24
Wooooh, Amazing book ! Everything is soo.... deep. In my opinion, tutorials should be only few lines.
Some mistakes :
Why installing CM7 and then backing up ? (You can install non market apps without CM7, and when flashing CM7 you erase all user data)
Why using m2sd if the rom has a built-in feature called a2sd ?
Why installing CWM then 4EXT recovery ? (TWRP is a touch one, and you can flash recovery once you have root access)
"You should have or buy an 8+MB, Class 10 SD card" ? typo ?
In my mind, big steps should be :
1) Backup SD, and SMS and Apps
2) Root
3) Install recovery (TWRP is advised by evervolv, but CWMRecovery is OK)
4) Partition SD
5) Install Blackrose (using 260mB system)
6) Flash ROM
7) Flash GAPS
8) A2SD Y N Y
Notes :
About SD-Ext size, i recommend reading this post from his creator : http://forum.xda-developers.com/showthread.php?t=1716124
A2SD is an old version of INT2EXT+
Using terminal is not friendly for beginners. Avoid it at maximum.
Provide a link for a MD5 sum checker.
I don't know if it works with actual stock rom, but when i rooted my n1, i used SuperOneClick. Plug, Click, Wait, Smile. (I still have it if needed)
ldFxl said:
In my opinion, tutorials should be only few lines.
Click to expand...
Click to collapse
This tutorial doesn't need to exist at all. All the information is available elsewhere on the internet, I did nothing original. Its only value is that it puts all the information in full detail in one place so you don't have to look in the forums for elaboration on each line of a more concise tutorial. Hopefully with info this detailed, someone with more chops than me could script it.
ldFxl said:
Why installing CM7 and then backing up ? (You can install non market apps without CM7, and when flashing CM7 you erase all user data)
Why using m2sd if the rom has a built-in feature called a2sd ?
Click to expand...
Click to collapse
I had already installed CM7 when I thought to write this, Marian (my 3rd source) seems pretty skilled as he is the only one who could make BlackRose work for me so I trusted his advice that it was the easiet procedure he found. Have you put TWRP Recovery on from stock after unlocking the bootloader (fastboot oem unlock)? And have you successfully repartitioned SD (fat32 &ext4) from TWRP? If so and you want to quickly write up the steps, I'd gladly replace my steps 3-6, that would save people a lot of time and doing.
ldFxl said:
Why installing CWM then 4EXT recovery ? (TWRP is a touch one, and you can flash recovery once you have root access)
Click to expand...
Click to collapse
4EXT is also touch, CWM cannot repartition SD. If you can go stock to TWRP this might be the best option. Or if not, stock to 4ext.
ldFxl said:
"You should have or buy an 8+MB, Class 10 SD card" ? typo ?
Click to expand...
Click to collapse
Yes! Thanks.
ldFxl said:
Using terminal is not friendly for beginners. Avoid it at maximum.
Click to expand...
Click to collapse
Don't you have to use terminal to use the built in A2SD? At any rate, it didn't work for me (I'm kind of a beginner), Mounts2SD's GUI seemed a little more beginner friendly. Also I certainly wouldn't have been able to make BlackRose work
ldFxl said:
Provide a link for a MD5 sum checker.
Click to expand...
Click to collapse
Good idea
ldFxl said:
I don't know if it works with actual stock rom, but when i rooted my n1, i used SuperOneClick. Plug, Click, Wait, Smile. (I still have it if needed)
Click to expand...
Click to collapse
I once used SuperOneClick on another phone, it looked like it struggled and finally worked with a DDoS style attack, it seemed simpler to just do it the way the manufacturer intended (if that's even a thing). But I suppose if it works with one click it really is simpler as seen by the user. Anyone have a report on whether it worked from stock N1?
Fituate said:
I had already installed CM7 when I thought to write this, Marian (my 3rd source) seems pretty skilled as he is the only one who could make BlackRose work for me so I trusted his advice that it was the easiet procedure he found. Have you put TWRP Recovery on from stock after unlocking the bootloader (fastboot oem unlock)? And have you successfully repartitioned SD (fat32 &ext4) from TWRP? If so and you want to quickly write up the steps, I'd gladly replace my steps 3-6, that would save people a lot of time and doing.
Click to expand...
Click to collapse
On my first flash, i was pretty beginner, so i followed a tutorial ; ) . And they used CWM. But flashing a recovery procedure from .img file doesn't differ with the recovery. TWRP allows you to partition SDCard. I did it last week (on HTC wildfire S, TWRP 2.6 as for N1).
Flashing step is the same -> just replace img file name. You can get it Here (From official TWRP Website)
Procedure from TWRP Website said:
Download the above file. Turn off your device. Turn on the device and keep holding volume down until a menu shows up. Select fasboot from the menu list. Plug the device into your computer. If you have the right drivers installed, your screen should now say FASTBOOT USB. Run the following command via the command line:
fastboot flash recovery recoveryfilename.img
Note that you will need to change the last part to match the name of the file that you just downloaded. This method requires that you have the drivers installed that come with the HTC Sync software that are available here. You will also need adb and fastboot for your computer.
Click to expand...
Click to collapse
6. Partition your SD Card
1. In recovery, Tap Advanced
2. Tap Partition SD Card
3. Set 2048 (MB max) on EXT Size and 0 on Swap Size
4. Tap EXT4 then swipe to start partitioning
Fituate said:
3. Reboot your phone manually. BlackRose should hijack the startup, install itself, and quit. Boot your phone up again.
Click to expand...
Click to collapse
Backrose is a custom Bootloader-> it replaces your HBoot/Fastboot
You don't need to reboot your phone to install blackrose. You just need your phone in ADB over USB, then the win setup will install blackrose.
Once done, run setup again, your phone will automaticaly go to HBoot, then choose 1, and 1 again.
Then enter "resize", "260" and "8".
In case that the installer don't work correctly, you can get flashable HBOOT from [Provide a nb0 (texasice recommend 260/8/168) AND MD5 Checksum]
While googling to find some infos (I don't remember me unlocking my bootloader) I found this guide : http://forum.xda-developers.com/wiki/HTC_Nexus_One/Flashing_Guide
Apperently SuperOneClick does not even need unlocked bootloader on 2.3.3 or previous ...
Isn't what we are trying to write down ?
There are many links pointing to this forum aswell.
Disclaimer: If you are not comfortable with using Fastboot and ADB and editing system files than this guide might not be for you. At this point this is what I have to offer.
Click here for the unofficial twrp image - Latest version as of 12/27/14
So getting right into it.
1. Turn on ADB mode on the watch by going to about and tapping the build info 7 times.
2. Download ADB and Fastboot utilties
3. Plug the watch into the computer and your phone should vibrate and ask you to accept the computers fingerprint, tick the check box to always allow and hit ok
4. Open up a command prompt or terminal inside of where the ADB utilities are located and enter
Code:
adb reboot bootloader
This next step will wipe your data!
5. Now you should be in fastboot, go ahead and on the terminal use the next code and follow prompts to unlock
Code:
fastboot oem unlock
6. Now after you re-set up your watch again you will need to do step 1 and 3 again.
Please do not skip step 6!
7. Go ahead and issue
Code:
adb reboot bootloader
8. Flash unofficial twrp, make sure the recovery image file is in the same location as fastboot than issue
Code:
fastboot flash recovery YOURIMGNAMEHERE.img
9. Upon successfully doing that you should have twrp installed
10. Lots in one step here, download the latest supersu.zip flashable file and put it in the same folder as ADB use the proper name of what you downloaded. Issue
Code:
adb push SUPERSUNAMEHERE.zip /sdcard/
11. Issue
Code:
adb reboot recovery
12. than using the very tiny TWRP and somewhat messed up go ahead and use it to install the supersu.zip under the folder /sdcard
13. Enjoy root and twrp.
I will make this guide into a much easier Java program in the very near future to make it easier to use.
This was typed up pretty fast and it is kinda hacky, I will work on a bat script and a shell script if we have enough osx users here. I'm sure someone will come along and make this better if I don't get around to it.
Credits:
Dees-Troy for his TWRP support for dory our fish brother device which worked on our device
Chainfire for all his hard work these many years
Q: ADB complains there is no device listed.
A: Install universal ADB drivers and then go to device manager and under the device with a yellow warning icon go to update driver, Browse my computer, let me pick from list of device drivers, than Google ADB interface. If it still complains turn off debugging, than turn it back on, revoke authorization, then disable and re-enable again.
One more just in case.
Great work!!
Just got the watch today and couldn't be happier. Custom kernel, TWRP and root (well sort of) all within 6 hours of having this watch.
I say root (sort of) because SU is force closing when running su in adb shell. First time it crashed adb on PC and had to reboot watch. Now it just force closes on my watch and adb exits on PC. What is the most current version of SuperSU? I have 1.94 from Chainfire's site.
Thank you SO MUCH for this! Do you or your team have a paypal?
hatefuel19 said:
Just got the watch today and couldn't be happier. Custom kernel, TWRP and root (well sort of) all within 6 hours of having this watch.
I say root (sort of) because SU is force closing when running su in adb shell. First time it crashed adb on PC and had to reboot watch. Now it just force closes on my watch and adb exits on PC. What is the most current version of SuperSU? I have 1.94 from Chainfire's site.
Thank you SO MUCH for this! Do you or your team have a paypal?
Click to expand...
Click to collapse
The latest supersu is version 2.36 dated 11.27.2014. 1.94 is well over a year old, you need to update for sure that is why you are force closing.
I figured that's what it was. Feeel real dumb for not finding the newest version the first time. Also most current is now 2.37 XD
Edit: That got it! Thanks tonu!
hatefuel19 said:
I figured that's what it was. Feeel real dumb for not finding the newest version the first time. Also most current is now 2.37 XD
Edit: That got it! Thanks tonu!
Click to expand...
Click to collapse
I'm here to help! I'm working on adding other mods to my other thread right now I'm working on getting busybox working.
Thanks for doing all of this work.
I was hoping you could help me with a step I am stuck on.
10. Lots in one step here, download the latest supersu.zip flashable file and put it in the same folder as ADB. Issue "adb push SUPERSUNAMEHERE.zip /sdcard/
When I do this it is saying permission denied. Also, should the watch be in recovery or fully booted when I run this command?
Thanks
---------- Post added at 09:31 PM ---------- Previous post was at 09:28 PM ----------
jimmydigital00 said:
Thanks for doing all of this work.
I was hoping you could help me with a step I am stuck on.
10. Lots in one step here, download the latest supersu.zip flashable file and put it in the same folder as ADB. Issue "adb push SUPERSUNAMEHERE.zip /sdcard/
When I do this it is saying permission denied. Also, should the watch be in recovery or fully booted when I run this command?
Thanks
Click to expand...
Click to collapse
Disregard I did it again and for some reason it worked. Maybe I need to reboot first.
Recovery
I went through your command and everything worked until I ran:
fastboot flash recovery UNOFFICIAL-openrecovery-twrp-2.8.0.0-lenok.img
Now the device just boots into the recovery and not into the system. The system/data partitions keep saying:
E:Unable to mount /data
E:Unable to mount /system
I am very comfortable with fastboot and adb so I do not know what I did wrong here.
Any ideas?
adamrobles said:
I went through your command and everything worked until I ran:
fastboot flash recovery UNOFFICIAL-openrecovery-twrp-2.8.0.0-lenok.img
Now the device just boots into the recovery and not into the system. The system/data partitions keep saying:
E:Unable to mount /data
E:Unable to mount /system
I am very comfortable with fastboot and adb so I do not know what I did wrong here.
Any ideas?
Click to expand...
Click to collapse
Try reflashing the recovery IMG again. And check back here.
Sent from my A0001 using XDA Free mobile app
reflashed
tonu42 said:
Try reflashing the recovery IMG again. And check back here.
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
I reflashed the recovery you provided and I keep rebooting to system but it takes me to twrp.
I am in the process of downloading the system dump from another thread to hopefully flash those to get back into the system.
adamrobles said:
I reflashed the recovery you provided and I keep rebooting to system but it takes me to twrp.
I am in the process of downloading the system dump from another thread to hopefully flash those to get back into the system.
Click to expand...
Click to collapse
The dump is extracted from the system.img, you won't be able to flash it in any way. None of this guide touches system files besides the root stuff which shouldn't affect boot. Try flashing the stock recovery.img instead.
tonu42 said:
The dump is extracted from the system.img, you won't be able to flash it in any way. None of this guide touches system files besides the root stuff which shouldn't affect boot. Try flashing the stock recovery.img instead.
Click to expand...
Click to collapse
Thank you for that information, I stopped the download of the dump.
Downloading the stock recovery now.
---------- Post added at 02:24 PM ---------- Previous post was at 02:10 PM ----------
tonu42 said:
The dump is extracted from the system.img, you won't be able to flash it in any way. None of this guide touches system files besides the root stuff which shouldn't affect boot. Try flashing the stock recovery.img instead.
Click to expand...
Click to collapse
I must have skipped a step...
installed stock recovery
booted into the watch system
enabled adb debugging
reboot to bootloader
install your recovery image
rebooted
pushed supersu
rebooted to twrp
installed supersu
rebooted to system
adb shell - verified root!
You are awesome! Thank you for taking the time to help me!
HYPE for 5.0.1
'm Hype! can't wait to flash the first 5.0.1 system dump on this as stated by +Darek Ross we MAY be receiving update as early as today!
I did this yesterday, and run into the same problem - TWRP spitting out errors when flashing
It was caused by NOT rebooting after unlocking bootloader, but proceeding with the flash rightaway - this apparently leaves the watch in an empty state (no /sdcard or /system contents) and it needs to boot up at least once before you flash anything
So the correct procedure is like this
1) enable development options
2) enable usb debugging
3) adb reboot-bootloader
4) fastboot oem unlock
5) let the watch boot normally, pair with your phone, enable development options and usb debugging again
6) adb reboot-bootloader
7) fastboot flash recovery recovery.img
8) fastboot reboot
9) adb push supersu.zip /sdcard/
10) adb reboot recovery
11) flash supersu.zip
Apparently, there is a problem when the original kernel is not present after "fastboot oem unlock" - the watch will be left empty, while on the original kernel it "reinstalls"
I typed this from memory, but I think you should know how these things work anyway, as there's not much for a "normal" user to do anyway... yet...
zvieratko said:
I did this yesterday, and run into the same problem - TWRP spitting out errors when flashing
It was caused by NOT rebooting after unlocking bootloader, but proceeding with the flash rightaway - this apparently leaves the watch in an empty state (no /sdcard or /system contents) and it needs to boot up at least once before you flash anything
So the correct procedure is like this
1) enable development options
2) enable usb debugging
3) adb reboot-bootloader
4) fastboot oem unlock
5) let the watch boot normally, pair with your phone, enable development options and usb debugging again
6) adb reboot-bootloader
7) fastboot flash recovery recovery.img
8) fastboot reboot
9) adb push supersu.zip /sdcard/
10) adb reboot recovery
11) flash supersu.zip
Apparently, there is a problem when the original kernel is not present after "fastboot oem unlock" - the watch will be left empty, while on the original kernel it "reinstalls"
I typed this from memory, but I think you should know how these things work anyway, as there's not much for a "normal" user to do anyway... yet...
Click to expand...
Click to collapse
My guide is setup like the one you put there. In order to get adb working again you need to re setup the watch step 6. Read the instructions carefully. I'll post a batch script later to simplify this.
Sent from my A0001 using XDA Free mobile app
Step 6 doesn't really say "you need to do this, OR ELSE", it seems like you just rehash the factory reset thing
And you should put step 10 before step 6, it can't really be done in that order...
but again, I guess the people trying this should now how it works, so no biggie, but since a few of us got hit by that "no initial boot" issue, it would be better to put a note in there
zvieratko said:
Step 6 doesn't really say "you need to do this, OR ELSE", it seems like you just rehash the factory reset thing
And you should put step 10 before step 6, it can't really be done in that order...
but again, I guess the people trying this should now how it works, so no biggie, but since a few of us got hit by that "no initial boot" issue, it would be better to put a note in there
Click to expand...
Click to collapse
By default debugging is disabled, I'm not sure how you were able to issue an ADB command on step 7 with out first performing step 6.
Aaah, sorry, should have been "after step 6"
another option is to do adb push with recovery loaded
I guess that's why I got that error before, because I combined 5+8 and flashed the recovery, but TWRP was unable to revive the watch from factory reset state (which makes me think it should not be on the watch unless needed...)
zvieratko said:
Aaah, sorry, should have been "after step 6"
another option is to do adb push with recovery loaded
I guess that's why I got that error before, because I combined 5+8 and flashed the recovery, but TWRP was unable to revive the watch from factory reset state (which makes me think it should not be on the watch unless needed...)
Click to expand...
Click to collapse
Ah I see, yea the guide is written as the absolute minimum to work right now. Like I said later today I'll try to post a script that automates all of this, its much easier.
Hello there!
Today, after a bit of tinkering around I managed to get my OnePlus 3 in a decrypted state without losing data!
However, this is NOT a method where your data will remain on the phone, it requires you to copy a backup to your PC and then copy everything back + fix permissions. In this guide you'll completely wipe/reset your phone prior to restoring everything.
FAQ:
Q: Why do I need an undecrypted phone?
A: So far (as of today, 06.07.2016) multiboot will not work on encrypted phones. That's probably the only reason why you'll ever want to decrypt your phone.
Q: Will updating the ROM force encryption again?
A: If you're using OxygenOS (or another encryption forcing ROM), yes. However if you flash the Full ROM ZIP and immediately after that SuperSU (DO NOT USE SYSTEMLESS OR IT WILL ENCRYPT AGAIN!!!) WITHOUT REBOOTING it'll not encrypt the device again. (Thanks to @JumboMan)
Q: I've followed your guide but my phone got encrypted again!
A: You've probably used the Systemless SuperSU version which does indeed not prevent your device from being encrypted again. Use the normal version available HERE.
You'll need:
A PC (obviously)
Unlocked OnePlus 3 (will probably work on other OnePlus phones, not tested!)
TWRP Recovery (follow THIS LINK for a guide)
About 50 GB of free space on your PC (depends on how much data you have on the phone)
ADB and Fastboot drivers installed on your PC (to get those connect your OP3 to your PC, as storage choose MTP, open the emulated OnePlus CD-Drive and install those drivers)
(Optional) 15 Seconds ADB Installer
A bit of time, roughly 30 minutes to 1 hour
!!!DISCLAIMER!!!
I'M NOT RESPONSIBLE FOR ANYTHING YOU'RE ABOUT TO DO HERE, THIS GUIDE IS PURELY WRITTEN "OUT OF MY HEAD" AND I CANNOT CONFIRM ANY OF THE FOLLOWING STEPS ANYMORE!!!!
ONLY DO THIS IF YOU KNOW HOW TO RECOVER FROM A HALF-INSTALLED OR COMPLETELY WIPED SYSTEM!!!
How To:
READ AND ACKNOWLEDGE THE DISCLAIMER ABOVE!
Done? Are you really sure? ... Okay!
If you don't need your data backed up simply start at Step 10 and ignore the restore parts after that.
Still on OxygenOS (or any other ROM) make sure you've enabled ADB in Developer Options and connected + allowed your PC at least one time, else ADB in TWRP will not work.
If you have Titanium Backup, create a backup of all your apps before starting. Just in case, you never know...
Once done boot into TWRP (see above for an installation guide)
Create a normal TWRP backup
Type in "adb devices" to check if you're allowed to use ADB inside TWRP. If it says "unauthorized" refer to Step 1 again.
Once done open up a CMD on your PC and cd to the directory you want all your backup-files to be (or navigate via Windows Explorer to the folder, hold "Shift", right-click and choose "Open command window here...")
Type in "adb pull /data/media" and wait. Depending on the size this can take a few minutes.
After that's done make sure all your files are here and ADB is not reporting any skipped files.
Checked all your files? Okay!
In TWRP choose "Reboot" and "Bootloader". This will put your phone into Fatboot mode.
Type in "fastboot devices" to check if your phone is recognized. If not go into device manager, find the Google Bootloader drivers and install those.
NOW IS YOUR LAST CHANCE TO MAKE SURE EVERYTHING'S BACKED UP AND THERE!
Next type in "fastboot format userdata" and hit enter. This will completely wipe your device.
Boot back into TWRP by using the volume rocker and the Power Button.
ADB is probably not working now (will only report "unauthorized"), MTP however still works. Copy the TWRP folder we backed up earlier onto the device again.
Once copying finished restore the backup and reboot into recovery again. You're now able to use ADB due to the adbpub.key being present again. (You could've done this earlier but it's easier that way.)
Copy the rest back onto the device with "adb push / /data/media". (I'm not really sure if this command is right, beware!)
Now type "adb shell chown -R media_rw:media_rw /data/media" to fix issues later in the ROM.
You're basically finished now! Simply reboot and wait till it boots up again. If you're getting stuck at a "Wrong PIN" or "Wrong Pattern" screen SEE THIS COMMENT I made in another thread.
Finished!
As said, I'm not sure if I forgot something here or not. However I think I got everything covered
Thank you. This was a much needed guide for all of us
Sent from my ONEPLUS A3003 using Tapatalk
Nice
Noob questions: is the decrypted OS faster? Performances of the phone are the same? What about updates (any update will crypt it again?
Thanks for any feedback!
Sent from my OnePlus3 using XDA Labs
IlD4nX said:
Noob questions: is the decrypted OS faster? Performances of the phone are the same? What about updates (any update will crypt it again?
Thanks for any feedback!
Sent from my OnePlus3 using XDA Labs
Click to expand...
Click to collapse
Performance is about the same.
I have no idea if updates will crypt it again, I think not tho? Not sure.
ota updates might encrypt it again if you're on stock. depending if there's a new kernel. the kernel I think forces encryption. so we need a modified boot img to disable forced encryptions. or use a custom kernel that disables force encryption.
If you're on a custom rom based on aosp/cm. most of them doesn't force encryption. so there's no need to worry.
Sent from the moon and back
Thanks for the guide, will this wipe my internal storage?
daavid1995 said:
Thanks for the guide, will this wipe my internal storage?
Click to expand...
Click to collapse
Yes, however the guide shows you how to get a backup of ALL your files before anything gets wiped.
Ajo, und servus aus Österreich
IlD4nX said:
Noob questions: is the decrypted OS faster? Performances of the phone are the same? What about updates (any update will crypt it again?
Thanks for any feedback!
Sent from my OnePlus3 using XDA Labs
Click to expand...
Click to collapse
Yes. updates will encrypt data again.
if you want to remain non encrypted after update then following procedure.
1. download full rom zip (not ota zip)
2.flash full update zip
3.without rebooting after flashing update just flash SuperSU zip. SuperSU will patch your boot img to remain in non encrypted state.
Proof- myself tried it on 3.2.0 update and it works without any problem
JumboMan said:
Yes. updates will encrypt data again.
if you want to remain non encrypted after update then following procedure.
1. download full rom zip (not ota zip)
2.flash full update zip
3.without rebooting after flashing update just flash SuperSU zip. SuperSU will patch your boot img to remain in non encrypted state.
Proof- myself tried it on 3.2.0 update and it works without any problem
Click to expand...
Click to collapse
Added to the OP Thanks for testing!
Thanks, i will try
Dere haha :fingers-crossed::good:
EpicLPer said:
Yes, however the guide shows you how to get a backup of ALL your files before anything gets wiped.
Ajo, und servus aus Österreich
Click to expand...
Click to collapse
maybe stupid questions, but not clear for me:
is there a negative point decrypting the phone or are there any risks?
will decrypting have an effect on the security of the phone?
odooo said:
maybe stupid questions, but not clear for me:
is there a negative point decrypting the phone or are there any risks?
will decrypting have an effect on the security of the phone?
Click to expand...
Click to collapse
As long as you're not an "international searched criminal" where the FBI tries to break into your phone then, no
I'd say it is a bit less secure but who cares, anyone who wants access to your phone somehow gets it anyways, TWRP isn't helping here either since anyone can simply boot into recovery and recover all files from there nonetheless.
Decryption risks are only when you're not good at backing up your data, else there are no risks of doing so.
@EpicLPer:
17. Copy the rest back onto the device with "adb push / /data/media". (I'm not really sure if this command is right, beware!)
Click to expand...
Click to collapse
"adb push / /data/media" doesnt work for me. Can somebody help? I restored the TWRP-Backup and only need to copy the rest on the device.
Edit: I did it in another way, copied all files manually.
Can someons dcrypt this
IzpG+nubzE2m3krvbos0lVDLANkIkiekZt209MYU12Vzny8WNOS7o4JGNoVAm41e/44IYPHmh
0Y7NnLW1JghbWJwbzL1WIpQw7nkzQoH9dEwvTiloTg5BI1u9TYRExzLGQEDUqN2hjq1G5cn
CqDmYoQnMs2bMiuajZweq9ZDC7gLruq6dse0L96gzZFoC/33lF0h1mEh7SBgW3FrcsjhRQ==
Sent from my SM-N910P using XDA-Developers mobile app
Worked, Thanks
How can I check if my device is decrypted or encrypted?
odooo said:
How can I check if my device is decrypted or encrypted?
Click to expand...
Click to collapse
Go to Settings > Device Security and check if it says encrypted or if it gives you the option to encrypt. If second, you know it's decrypted.
Can somebody do some benchmarks? I am really curious whether it makes a difference or not.
from what I've heard it makes a big difference in sequential rw speeds, which are actually pretty important on android.
Will it wipe my rom too?? Or just internal storage??
---------- Post added at 04:03 PM ---------- Previous post was at 03:31 PM ----------
EpicLPer said:
Hello there!
Today, after a bit of tinkering around I managed to get my OnePlus 3 in a decrypted state without losing data!
However, this is NOT a method where your data will remain on the phone, it requires you to copy a backup to your PC and then copy everything back + fix permissions. In this guide you'll completely wipe/reset your phone prior to restoring everything.
FAQ:
Q: Why do I need an undecrypted phone?
A: So far (as of today, 06.07.2016) multiboot will not work on encrypted phones. That's probably the only reason why you'll ever want to decrypt your phone.
Q: Will updating the ROM force encryption again?
A: If you're using OxygenOS (or another encryption forcing ROM), yes. However if you flash the Full ROM ZIP and immediately after that SuperSU WITHOUT REBOOTING it'll not encrypt the device again. (Thanks to @JumboMan)
You'll need:
A PC (obviously)
Unlocked OnePlus 3 (will probably work on other OnePlus phones, not tested!)
TWRP Recovery (follow THIS LINK for a guide)
About 50 GB of free space on your PC (depends on how much data you have on the phone)
ADB and Fastboot drivers installed on your PC (to get those connect your OP3 to your PC, as storage choose MTP, open the emulated OnePlus CD-Drive and install those drivers)
(Optional) 15 Seconds ADB Installer
A bit of time, roughly 30 minutes to 1 hour
!!!DISCLAIMER!!!
I'M NOT RESPONSIBLE FOR ANYTHING YOU'RE ABOUT TO DO HERE, THIS GUIDE IS PURELY WRITTEN "OUT OF MY HEAD" AND I CANNOT CONFIRM ANY OF THE FOLLOWING STEPS ANYMORE!!!!
ONLY DO THIS IF YOU KNOW HOW TO RECOVER FROM A HALF-INSTALLED OR COMPLETELY WIPED SYSTEM!!!
How To:
READ AND ACKNOWLEDGE THE DISCLAIMER ABOVE!
Done? Are you really sure? ... Okay!
If you don't need your data backed up simply start at Step 10 and ignore the restore parts after that.
Still on OxygenOS (or any other ROM) make sure you've enabled ADB in Developer Options and connected + allowed your PC at least one time, else ADB in TWRP will not work.
If you have Titanium Backup, create a backup of all your apps before starting. Just in case, you never know...
Once done boot into TWRP (see above for an installation guide)
Create a normal TWRP backup
Type in "adb devices" to check if you're allowed to use ADB inside TWRP. If it says "unauthorized" refer to Step 1 again.
Once done open up a CMD on your PC and cd to the directory you want all your backup-files to be (or navigate via Windows Explorer to the folder, hold "Shift", right-click and choose "Open command window here...")
Type in "adb pull /data/media" and wait. Depending on the size this can take a few minutes.
After that's done make sure all your files are here and ADB is not reporting any skipped files.
Checked all your files? Okay!
In TWRP choose "Reboot" and "Bootloader". This will put your phone into Fatboot mode.
Type in "fastboot devices" to check if your phone is recognized. If not go into device manager, find the Google Bootloader drivers and install those.
NOW IS YOUR LAST CHANCE TO MAKE SURE EVERYTHING'S BACKED UP AND THERE!
Next type in "fastboot format userdata" and hit enter. This will completely wipe your device.
Boot back into TWRP by using the volume rocker and the Power Button.
ADB is probably not working now (will only report "unauthorized"), MTP however still works. Copy the TWRP folder we backed up earlier onto the device again.
Once copying finished restore the backup and reboot into recovery again. You're now able to use ADB due to the adbpub.key being present again. (You could've done this earlier but it's easier that way.)
Copy the rest back onto the device with "adb push / /data/media". (I'm not really sure if this command is right, beware!)
Now type "adb shell chown -R media_rw:media_rw /data/media" to fix issues later in the ROM.
You're basically finished now! Simply reboot and wait till it boots up again. If you're getting stuck at a "Wrong PIN" or "Wrong Pattern" screen SEE THIS COMMENT I made in another thread.
Finished!
As said, I'm not sure if I forgot something here or not. However I think I got everything covered
Click to expand...
Click to collapse
Will it wipe my rom too?? Or just internal storage??
as usual, if anything goes wrong, no responsibility etc
The official update tutorial for rooted users doesn't keep app data, only internal storage! This tutorial keeps EVERYTHING
This method allows updating from 4.5.15 (unlocked, encrypted, rooted) to 5.0.2 without any data (sys settings + app data + user data) loss
A FAQ section is present at the end of this post and will be regularly updated.
List of files to download while doing the following steps:
OOS 5.0.2 ROM
Codeworkx TWRP recovery
Latest Magisk
Terms and software used in this guide:
Fastboot / Bootloader = bootloader of the phone, it's a very low level mode of the phone that allows booting into recovery. Can be accessed by using the advanced reboot menu (enable in dev options) or by "adb reboot fastboot".
Recovery = a small operating system on the phone that allows you to do various operations even when the main OS (Android) is broken. This includes flashing ROMs, modifying stuff on the storage, etc. It's the Android swiss army knife. If you can get a phone to boot TWRP, then you can do almost anything.
Magisk = rooting software that uses a systemless method to keep SafetyNet working. Systemless = instead of modifying the system, every change is put in a separate image that is mounted "over" the system. When the system tries to access a file modified by Magisk, instead of reading it from the partition, it reads it from Magisk. It's recommended to use Magisk instead of SuperSU as of 2018.
ADB = tool that allows controlling the phone from your PC through USB. You can use it when you're in Android if USB debugging is enabled in the settings, or when you're in TWRP. Here, we mostly use it for transferring files directly (without MTP) and running commands (using "adb shell")
Note: For this guide you will be required to download and install Magisk. If you don't want your phone to be rooted, then at the end of this guide reboot into TWRP, wipe both caches and re-flash the OS. This will uninstall Magisk and any other root patch. Beware: it will reflash stock recovery, so if you ever want to re-root, you'll need to reboot to fastboot and flash TWRP manually.
Convention for commands that you will have to run:
a command line starting with "C:" means that it should be run on your PC
a command line starting with "~ #" means that it should be run on your phone (through adb shell) while in TWRP
a command line starting with "OnePlus5:/ $" means that it should be run on your phone (through adb shell) while in OxygenOS
Although the commands start with "C:", this is just for readability purposes. You should run everything from inside an empty directory with enough disk space and writing access.
Your phone will have to be plugged in to your PC from the beginning to the end. Also, make sure it has at least 80% battery before beginning, just in case.
I know, the tutorial is huge. This is simply due to the fact that if I just wrote "make a nandroid backup of this and that, flash, and restore the backup while doing this", then some people may encounter problems because not everyone knows how to do a nandroid backup, restore it, etc. Also, there are a lot of things that need to be done precisely that way and not another way, which explains why the tutorial is huge. Also, you may notice that there is a lot of commands to run throughout the tutorial, this is because that way, I'm sure that at the end, you will have done everything like I did it on my phone, so that if you have a problem it's much easier to figure out where it comes from.
Summary of what you need to do (this is only a SUMMARY to give you a preview of what the whole thing looks like, you shouldn't follow it except if you're really an expert since a lot of things need to be done precisely, instead you should follow the easier complete steps below):
Make a Nandroid backup of /data
Backup files on internal storage
Wipe everything (internal storage + /data + system + caches), and then format data (important!)
Push and flash the OOS zip
Wipe caches and reboot (to Oreo!)
When it reboots, make sure everything (features, like Wi-Fi and fingerprint sensor) works. Don't "save anything" though, everything you do will be erased when we'll restore your backup. This is just a "test drive" for Oreo.
Reboot to TWRP, wipe Data and restore the /data backup
Run the three commands to fix Wi-Fi and fingerprints
Reboot (to System) and check everything works (don't do anything, don't change any setting, just make sure it works)
Reboot to TWRP, rename the "Android" folder to "Android_oreo" on sdcard, delete everything else on sdcard and restore your internal files
Rename the freshly restored Android (nougat) folder to "Android_nougat" and rename "Android_oreo" to "Android".
Flash Magisk, wipe dalvik+cache and reboot to System
When in Android, everything should work except some apps won't have their data. This is normal. Open a terminal (either on your phone using Termux or from your PC using adb shell), elevate using su and rename "Android" to "Android_oreo" and "Android_nougat" to "Android" (this is so that it correctly restores permissions)
If everything works fine, delete the "Android_oreo" folder
First, if you have Xposed Framework (systemless or not) installed, uninstall it. Next, if needed, uninstall any Magisk module that is "Nougat-only" to prevent any problems afterwards.
Boot the phone to bootloader/fastboot (either using advanced reboot, or by using volume down button when you start your phone) and boot to the TWRP recovery by doing
Code:
C:\> fastboot boot twrp-3.2.1-0-oreo-8.1-codeworkx-cheeseburger.img
from your PC.
Next, in TWRP, make a backup of /data (using the Backup button). Then, still while in TWRP, run the following commands:
Code:
C:\> adb shell
~ # cd /sdcard
/sdcard # tar cvf twrp.tar TWRP
/sdcard # md5sum twrp.tar
<< md5 checksum of twrp.tar >>
/sdcard # exit
C:\> adb pull -p /sdcard/twrp.tar
When the above command has finished, make sure that the checksum of the received twrp.tar file matches the one previously displayed.
If it doesn't match, delete the file and run adb pull again. Don't continue following this guide until you have received a 1:1 (checksum-wise) backup of /data.
Code:
C:\> adb shell
<< WARNING: dangerous command! double check the following line is correct before pressing enter! >>
~ # rm -rf /sdcard/TWRP
~ # rm /sdcard/twrp.tar
That was for /data. Now, the backup for the internal storage:
Code:
~ # cd /sdcard
/sdcard # du -csh
<< you should see here the total size of sdcard, that'll give you an idea of how long it'll take >>
/sdcard # tar cvf sd.tar element1 element2 element... elementN
<< in the command above, replace "element1..N" by a space-separated list of what you want to have in the backup.
Keep in mind that your list HAS to contain the element "Android" (case is important). It contains the app data.
Let's say for example you want to keep only the photos you have taken (and nothing, nothing else that was on internal storage).
The photos are in the folder DCIM, so the command will look like this:
tar cvf sd.tar Android DCIM
(because you want DCIM, and Android has to be in the list, no matter where)
>>
/sdcard # md5sum sd.tar
<< md5 checksum of sd.tar >>
/sdcard # exit
C:\> adb pull -p /sdcard/sd.tar
When the above command has finished, make sure that the checksum of the received sd.tar file matches the one previously displayed.
If it doesn't match, delete the file and run adb pull again.
Keep in mind that anything you don't put in that list will not be backed up and will be lost!
Now, you have a backup for all the important stuff so we can start doing the real sh*t.
Now, the important step:
Go back to the TWRP home screen, press "Wipe", "Advanced Wipe" and there check "Dalvik / ART Cache", "Cache", "System", "Data" and "Internal Storage". Confirm using the slider at the bottom of the screen. Press the home button, then "Reboot" and "FastBoot". Now, type the same fastboot command as in the previous step to boot the recovery image. You'll enter the recovery as before.
Now, on your PC, in the terminal, type
Code:
adb push -p OnePlus5Oxygen_23_OTA_029_all_1801292040_d71af3d.zip /sideload
(note: here, we are not using "adb sideload", we are really using "adb push"). In TWRP, click Install, in the file manager go to /sideload and select the OOS zip file. Confirm by sliding. If you get an error, go back to home, click Mount and ensure System is not checked. Then try installing again. If it still does not work, reboot to fastboot, type command again, get to the recovery and install again.
When the zip-file is installed, go home, click "Wipe", "Advanced Wipe" and check both caches and confirm. Then, go home, click "Wipe" and then "Format Data". Then, go home, click "Reboot" and then "System". Your phone will now reboot to Oreo. It will take a long time, but do not turn off the phone. Let it run. On my phone, it took on average 2 minutes for that boot.
You'll be greeted by the "first boot" page. It'll ask you if you want to restore a backup or start anew, choose start anew. Connect to your Wi-Fi network and Google account. Follow all the instructions until you get to the home screen. There, make sure everything works (especially Wi-Fi and fingerprint sensor). Don't save your fingerprints yet, they will be erased afterwards. If everything works, you can continue following these instructions. If not, post a comment down there.
Now that you're at the home screen, go in the settings, About Android and click the build number 8 times to enable Developer Options. Go in there and enable advanced reboot. Then, reboot your phone into fastboot/bootloader using the power button. Type the exact same command as before to start TWRP. Once that you are in TWRP, run the following commands:
Code:
C:\> adb push -p twrp.tar /sdcard/
C:\> adb shell
~ # cd /sdcard
/sdcard # tar xvf twrp.tar
/sdcard # cp /data/misc/wifi/WifiConfigStore.xml /sdcard/
In TWRP, click "Wipe", "Advanced Wipe" and check only the "Data" partition. Confirm. Press home, then "Restore" and choose the backup in the list. Confirm to restore. Back to the terminal, we need to run the following commands otherwise Wi-Fi and fingerprints won't work:
Code:
/sdcard # cp WifiConfigStore.xml /data/misc/wifi/
/sdcard # rm /data/misc/wifi/wpa_supplicant.conf
<< WARNING: dangerous command! double check the following line is correct before pressing enter! >>
/sdcard # rm -rf /data/system/users/0/fpdata
/sdcard # rm /data/system/users/0/settings_fingerprint.xml
Note: the command above are ran from your PC in an adb shell while the phone is still in TWRP.
Reboot the phone to system and ensure Wi-Fi and fingerprints are still working. Right now you should already see your old home screen and all your apps, but the internal storage isn't there yet. Reboot in fastboot, run the command to get in TWRP.
Once TWRP has booted, run the following commands:
Code:
C:\> adb push -p sd.tar /sdcard/
C:\> adb shell
~ # cd /sdcard
<< WARNING: dangerous command! double check the following line is correct before pressing enter! >>
/sdcard # rm -rf Alarms Albums DCIM Download Movies Music Notifications Pictures Podcasts Ringtones
/sdcard # ls
<< now, look at the list of files that were printed, and rm anything left that is not called "Android" or "sd.tar"
<< WARNING: dangerous command! double check everything is correct before pressing enter! >>
if when you do rm <the thing> it tells you it's a directory, then do: rm -rf <thething>
if there's a folder called SomeFolder, do "rm -rf SomeFolder"
next, run this:
/sdcard # ls
Android sd.tar <-- expected output
/sdcard # mv Android Android_oreo
/sdcard # tar xvf sd.tar
/sdcard # mv Android Android_nougat
/sdcard # mv Android_oreo Android
If you don't have Magisk somewhere on your sd card, download it and upload it using MTP or adb. Then flash it using the Install button. Clear dalvik/cache and reboot to system.
When the phone has booted (again, it might take time), make sure USB debugging is enabled and run the following commands:
Code:
C:\> adb shell
OnePlus5:/ $ su
<< here, you might see a Magisk screen asking for superuser access. Allow. >>
OnePlus5:/ $ cd /sdcard
OnePlus5:/sdcard $ mv Android Android_oreo && mv Android_nougat Android
Now, try some apps and make sure all the data is there (especially games and Netflix/Hulu/etc). If everything is there, and the phone works properly, go back in the terminal and type:
Code:
OnePlus5:/sdcard $ rm -rf Android_oreo
Optionally, start the TWRP app and flash it, it can always be useful. You can also reboot to fastboot to do that.
Now reboot your phone (normal reboot) one last time.
There, working OOS 5.0.2 / Android 8.0.0 phone with no data loss.
Frequently Asked Questions
How long does the whole thing take?
Highly depends on the amount of data you have on your phone. Since it the USB port only supports USB 2.0, it may take 4 or 5 hours in total.
Will doing this void my warranty?
No.
Will I be able to install future OTA updates using the regular download-reboot-flash-twrp procedure?
Yep. Just use the regular method as you would have on Nougat.
Will I lose my data?
If you follow all the instructions, no. Even if you don't follow them, as soon as you have made a backup of /data and internal storage, then no matter how bad you screw up you could always get a working phone back.
I followed the instructions and now my phone doesn't work
Boot in TWRP, wipe everything, reflash.
questions will be added there in the future
Having WiFi and fingerprint issues
You sure it is a good idea to just delete those files? I would have guessed that I need to replace these (nougat version from backup) with the oreo version to have it working just like before the restore.
Code:
/sdcard # rm /data/misc/wifi/wpa_supplicant.conf
/sdcard # rm -rf /data/system/users/0/fpdata
/sdcard # rm /data/system/users/0/settings_fingerprint.xml
I'm having the issues with wifi and fingerprints. Neither one is working. I'll try to figure out how to fix this.
@zdimension Thanks for this guide, I don't have time to test it yet, but I have a question
pdluke said:
Code:
/sdcard # rm /data/misc/wifi/wpa_supplicant.conf
/sdcard # rm -rf /data/system/users/0/fpdata
/sdcard # rm /data/system/users/0/settings_fingerprint.xml
Click to expand...
Click to collapse
At this point in the procedure, adb shell is still using root (before flashing magisk) ? How is that possible ? Does the adb /sideload preserve root ?
olivier380 said:
@zdimension Thanks for this guide, I don't have time to test it yet, but I have a question
At this point in the procedure, adb shell is still using root (before flashing magisk) ? How is that possible ? Does the adb /sideload preserve root ?
Click to expand...
Click to collapse
These commands should be run while the phone is in TWRP. Also note that adb /sideload is not used here, only adb push.
pdluke said:
You sure it is a good idea to just delete those files? I would have guessed that I need to replace these (nougat version from backup) with the oreo version to have it working just like before the restore.
Code:
/sdcard # rm /data/misc/wifi/wpa_supplicant.conf
/sdcard # rm -rf /data/system/users/0/fpdata
/sdcard # rm /data/system/users/0/settings_fingerprint.xml
I'm having the issues with wifi and fingerprints. Neither one is working. I'll try to figure out how to fix this.
Click to expand...
Click to collapse
If you delete them, they will be generated automatically at the next system boot. But you could also make a backup of those three files before wiping /data, store that somewhere, restore Nougat /data and then restore your backup of those three files. The result would be the same.
Note: actually, not exactly. Erasing the first file won't change anything since it's not used anymore in Oreo, but the two other files contain the fingerprint configuration (list of saved fingerprints). So,
Either you remove the files and you have to save your fingerprints again at next boot
Either you restore them from an Oreo backup and you'll get the fingerprints you had saved during the "first boot" procedure when you rebooted the phone right after flashing the OS
But the result is mostly the same: everything works. Deleting the files ensures you get something clean. If you restore from an Oreo backup I can't guarantee the result (as it may interfere with other files from the Nougat backup).
10 bucks to make a script to do this all for me haha.
@zdimension Thanks for the clarification Another thing you might add to the files to download would be Magisk (optionally). In this kind of guide, I've always find it useful to download everything first.
olivier380 said:
@zdimension Thanks for the clarification Another thing you might add to the files to download would be Magisk (optionally). In this kind of guide, I've always find it useful to download everything first.
Click to expand...
Click to collapse
Oops, forgot to add it
I added the link, and also instructions for how to un-root afterwards for those who would want it.
To improve the guide, here are some ideas :
- You should highlight that rm -rf is a very dangerous command, and that it needs to be checked twice (especially the targeted folder)
- It could be useful to use the du -csh command to check the size of a folder (to estimate the backup time for example).
- As a safety measure, one could md5sum the tar file before and after using adb pull
What do you think ?
olivier380 said:
To improve the guide, here are some ideas :
- You should highlight that rm -rf is a very dangerous command, and that it needs to be checked twice (especially the targeted folder)
- It could be useful to use the du -csh command to check the size of a folder (to estimate the backup time for example).
- As a safety measure, one could md5sum the tar file before and after using adb pull
What do you think ?
Click to expand...
Click to collapse
Thanks for the ideas! I updated the post (and I added a changelog at the bottom for future reference).
Followed guide for successful upgrade from 4.5.15 encrypted, unlocked bootloader w/ Magisk root.
One note, after the first complete wipe and flash of the full ROM, it was getting stuck on first boot and never completed. Discovered that I needed to not just wipe the Data partition but Format it in TWRP, to clear out the old encryption I think. Magisk wouldn't install either until I did this.
@debork thanks for the positive feedback (all the merit goes to @zdimension of course)
@zdimension there are many people in the other thread https://forum.xda-developers.com/oneplus-5/how-to/official-oxygenos-4-5-2-7-1-1-ota-t3627003 that tried (unsucessfully) to upgrade from 4.5.15 to 5.0.1, maybe a link to this topic could be useful for them (if it's not too late).
Regarding the
Go back to the TWRP home screen, press "Wipe", "Advanced Wipe" and there check "Dalvik / ART Cache", "Cache", "System", "Data" and "Internal Storage".
Click to expand...
Click to collapse
I think it should be highlighted in red, since it is the actual "clean flash" (AFAIU, correct me if I'm wrong).
if we only have the BL unlocked non root and stock recovery can we only ota without any loss of data ?
debork said:
Followed guide for successful upgrade from 4.5.15 encrypted, unlocked bootloader w/ Magisk root.
One note, after the first complete wipe and flash of the full ROM, it was getting stuck on first boot and never completed. Discovered that I needed to not just wipe the Data partition but Format it in TWRP, to clear out the old encryption I think. Magisk wouldn't install either until I did this.
Click to expand...
Click to collapse
Thanks for feedback, I will add that to the guide (although it worked with just Wipe for me )
zdimension said:
Thanks for feedback, I will add that to the guide (although it worked with just Wipe for me )
Click to expand...
Click to collapse
Have you rooted the 4.5.15 with Magisk or SuperSU (which is not compatible with Oreo anymore) ?
olivier380 said:
Have you rooted the 4.5.15 with Magisk or SuperSU (which is not compatible with Oreo anymore) ?
Click to expand...
Click to collapse
I stopped using SuperSU when it was sold to that shady company. Also, Magisk is better imo.
quick05 said:
if we only have the BL unlocked non root and stock recovery can we only ota without any loss of data ?
Click to expand...
Click to collapse
Official OnePlus support said that nothing is guaranteed if your bootloader is unlocked. But since you're on stock recovery + non rooted, you could always try. But backup everything first. Some people here on XDA have reported that it doesn't work, though.
Just followed your guide with no problems. Thank you very much!! I can confirm also that you need to format data after the wipe otherwise it gets stuck in a bootloop!
Thanks so much for this. I was able to successfully follow the guide and get upgraded to 5.0.1 without losing any data. In fact, I even messed up one step by failing to include the Android directory in the sdcard.tar backup (perhaps that should be more explicit), but it doesn't seem to have affected everything; all of my apps seem to have retained their data.
A few notes:
1. The file size of twrp.tar was ~14GB but when executing the pull command, it recognized it as only ~1.3 GB. As a result, the pull was not complete until it reached over 1000%. All the more reason to do the md5 check.
2. As others stated, I needed to format the data partition, not just wipe it.
3. I might recommend also including a "summary" version somewhere on what this guide does. Scrolling through the guide the first time, it seemed pretty daunting, but really all that you're doing is: backing up data partition and internal storage; wiping device; flashing Oreo ROM; tweaking a few files; and restoring backed up data and internal storage.
Thank you again so much! Glad to finally be on Oreo.
elight3 said:
Thanks so much for this. I was able to successfully follow the guide and get upgraded to 5.0.1 without losing any data. In fact, I even messed up one step by failing to include the Android directory in the sdcard.tar backup (perhaps that should be more explicit), but it doesn't seem to have affected everything; all of my apps seem to have retained their data.
A few notes:
1. The file size of twrp.tar was ~14GB but when executing the pull command, it recognized it as only ~1.3 GB. As a result, the pull was not complete until it reached over 1000%. All the more reason to do the md5 check.
2. As others stated, I needed to format the data partition, not just wipe it.
3. I might recommend also including a "summary" version somewhere on what this guide does. Scrolling through the guide the first time, it seemed pretty daunting, but really all that you're doing is: backing up data partition and internal storage; wiping device; flashing Oreo ROM; tweaking a few files; and restoring backed up data and internal storage.
Thank you again so much! Glad to finally be on Oreo.
Click to expand...
Click to collapse
Thanks for the feedback! I'll add a summary to the guide.