Related
I need some help like if someone could help me root my phone by conectiong to my computer to help me out that would be great. I have hacked many windows mobile phones and iphone and I still cant do this I think i got the bootloader to unlock and I think I have it rooted im just having a problem trying to put the recovery image on before i can put a new rom on some please help me out.
Yahoo messanger jasonolbrys
help>!
give more details about where you stand , how far your in on your phone.
JasonInWisconsin said:
I need some help like if someone could help me root my phone by conectiong to my computer to help me out that would be great. I have hacked many windows mobile phones and iphone and I still cant do this I think i got the bootloader to unlock and I think I have it rooted im just having a problem trying to put the recovery image on before i can put a new rom on some please help me out.
Yahoo messanger jasonolbrys
Click to expand...
Click to collapse
Im pretty sure its rooted but im having a hard time trying to get the recovery-RA-nexus-v1.7.0.img to run i have tryed it wit hthe termial and through windows and im having no luck
JasonInWisconsin said:
I need some help like if someone could help me root my phone by conectiong to my computer to help me out that would be great. I have hacked many windows mobile phones and iphone and I still cant do this I think i got the bootloader to unlock and I think I have it rooted im just having a problem trying to put the recovery image on before i can put a new rom on some please help me out.
Yahoo messanger jasonolbrys
Click to expand...
Click to collapse
What are you seeing when attempting to flash recovery?
So when you reboot your phone you see an unlocked lock under the colourful "X"? If you do, you have indeed unlocked your bootloader and have a proper fastboot setup.
Now you need to boot back into the bootloader [Trackball + Power]. Place the AmonRa recovery image into the "tools" folder of your sdk and rename it simply to "recovery.img". Then run the command
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
On the top right of your phone screen you will see a progress bar. Once it is complete, boot into the new recovery by fully powering down, thenholding [Volume Down + Power ], selecting "Recovery" from the list and tapping the power button to confirm selection.
Double post.
We are all jumping to conclusions here...let's start from the beginning.
OP - have you turned your phone on?
(I crack myself up)
Hahaha what the hell?
ok so i renamed the AmonRa recovery image to recovery.img and put it in the tools folder on my desktop and booted the phone in bootloader then tryed to run the command on the computer and I cant get it to work what am i suppost to type
I would try putting the recovery.img SDK\ dir, then using fastboot
fastboot flash recovery recovery.img
easiest way
wesbalmer said:
I would try putting the recovery.img SDK\ dir, then using fastboot
fastboot flash recovery recovery.img
easiest way
Click to expand...
Click to collapse
The tools folder is where fastboot lives so unless he puts the sdk\tools path in his global path, he will have to type tools\fastboot flash recovery recovery.img
OP - if you type fastboot devices, do you get an item list that displays your device?
deprecate said:
The tools folder is where fastboot lives so unless he puts the sdk\tools path in his global path, he will have to type tools\fastboot flash recovery recovery.img
OP - if you type fastboot devices, do you get an item list that displays your device?
Click to expand...
Click to collapse
True, forgot how difficult it was to root the N1 :-(
ok i got it but now i flashed a new rom and it wont come off the start up screen this is nuts.
JasonInWisconsin said:
ok i got it but now i flashed a new rom and it wont come off the start up screen this is nuts.
Click to expand...
Click to collapse
go back to recovery, wipe everything (except your sd card). Flash your rom and if needed, the g-apps package (cyanogen rom additional step). Tell it to reboot and wait for it to boot up.
Sounds like you didn't wipe and got it stuck in a bootloop.
All is well thanks a lot guys
It's not hard to root the Nexus at all. I had adb and fastboot all set up for my Dream. It only took me maybe 2 minutes from when I unboxed my Nexus to having unlocked the bootloader. But he got it working now so it's good.
After installing Vanir, I don't know what went wrong !!! it was freezing then after trying to charge it, it bricked!!!!
I searched the forume and found major two ways
FIRST
RuedasLucas Here :
http://forum.xda-developers.com/showthread.php?t=1932123
i followed the info. correctly and stuck in the same problem the man in the thread have, I am stuck in LG logo
so i tied the second
http://forum.xda-developers.com/showpost.php?p=40174748&postcount=9&nocache=1
and i am stuck in installing " LGmobile Support Tool " because i am in windows 8 and it is not compitable with it. every time trying to install it seems not responding.
so i am stuck now and donot know how to unbrick it !!! no one tell me to set up win 7 because i donot have one
The LG support tool works fine on my Windows 8 64-bit version. Look for the thread on 'Flashing a KDZ with pictures' and follow it to the letter.
did u install gapps ? vanir installation never had a problem. about windows 8 x64 i can confirm the support tool is working because i had them some months ago ( now im on ubuntu x64 ).
and its not a good idea if on some little mistake u try go back to stock. the reason u tried flash vanir was to go away from stock. if u flash back to stock then in a few days will want to flash again a custom. so try again and do it right !
also dont take off battery. no need. maybe this battery trick is history. i never did that. i just long pressed power to reboot and then i just pressed a few times the vol down ( not hold ).
SimonTS said:
The LG support tool works fine on my Windows 8 64-bit version. Look for the thread on 'Flashing a KDZ with pictures' and follow it to the letter.
Click to expand...
Click to collapse
Actually i did this before posting from that thread
http://forum.xda-developers.com/showthread.php?t=2069723
between step 3 and 4 it give me " app. not responding "
kessaras said:
did u install gapps ? vanir installation never had a problem. about windows 8 x64 i can confirm the support tool is working because i had them some months ago ( now im on ubuntu x64 ).
and its not a good idea if on some little mistake u try go back to stock. the reason u tried flash vanir was to go away from stock. if u flash back to stock then in a few days will want to flash again a custom. so try again and do it right !
also dont take off battery. no need. maybe this battery trick is history. i never did that. i just long pressed power to reboot and then i just pressed a few times the vol down ( not hold ).
Click to expand...
Click to collapse
i didn't catch it. But if u mean i reflash vanir, The mobile is " dead now !!!! " so i must unbrick to any firmware then reflash
arrivals18 said:
Actually i did this before posting from that thread
http://forum.xda-developers.com/showthread.php?t=2069723
between step 3 and 4 it give me " app. not responding "
Click to expand...
Click to collapse
Try disabling any anti-virus first just to make sure that's not interfering. I've never heard of the proces freezing there before.
SimonTS said:
Try disabling any anti-virus first just to make sure that's not interfering. I've never heard of the proces freezing there before.
Click to expand...
Click to collapse
Ok is the tool take some time to load if internet connection is not good ?!!
arrivals18 said:
Ok is the tool take some time to load if internet connection is not good ?!!
Click to expand...
Click to collapse
It shouldn't make any real difference, no.
arrivals18 said:
Actually i did this before posting from that thread
http://forum.xda-developers.com/showthread.php?t=2069723
between step 3 and 4 it give me " app. not responding "
Click to expand...
Click to collapse
You did disable the Modem, right? And sometimes, the process seems to take a little long. You have to be patient.
Sent from my Optimus 4X HD using XDA Premium 4 mobile app
arrivals18 said:
i didn't catch it. But if u mean i reflash vanir, The mobile is " dead now !!!! " so i must unbrick to any firmware then reflash
Click to expand...
Click to collapse
mmmmmm.... if at the end u cant do anything and since, propably, your bootloader is unlocked , u can reinstall the recovery using the adb ( use cmd: adb reboot bootloader and then, when u are there , hit: adb install [recovery zip file path/name] ). eh the rest u know them so u dont need to use any kdz and tire urself with that boring procedure
SimonTS said:
It shouldn't make any real difference, no.
Click to expand...
Click to collapse
Ok i already installed win. 7 and installed the tool that take really short time.
i connect the phone to usb in the mode and choose in the tool " recover from wrong update " it downloaded nearly 573 mb. and installed it in the phone, and when the phone restarts, the phone sticks in LG logo . SO what now !!!!!!!
[email protected] said:
You did disable the Modem, right? And sometimes, the process seems to take a little long. You have to be patient.
Yep. every thing ok as u see.
Sent from my Optimus 4X HD using XDA Premium 4 mobile app
Click to expand...
Click to collapse
kessaras said:
mmmmmm.... if at the end u cant do anything and since, probably, your bootloader is unlocked , u can re-install the recovery using the adb ( use cmd: adb reboot bootloader and then, when u are there , hit: adb install [recovery zip file path/name] ). eh the rest u know them so u dont need to use any kdz and tire urself with that boring procedure
Click to expand...
Click to collapse
Yep. This may happened, when i opened the bootloader i use the code 3845#*880#>Boatloader>check boatloader> Unlock,
soi knew that it's unlocked. Am i wrong ? Guys i done both the first and the second method and all stuck in LG logo
in the first i used V20C_00.kdz and did the rights steps and also stuck !!!! so what now !!!!!!!!!!!!!!11
arrivals18 said:
Ok i already installed win. 7 and installed the tool that take really short time.
i connect the phone to usb in the mode and choose in the tool " recover from wrong update " it downloaded nearly 573 mb. and installed it in the phone, and when the phone restarts, the phone sticks in LG logo . SO what now !!!!!!!
Yep. This may happened, when i opened the bootloader i use the code 3845#*880#>Boatloader>check boatloader> Unlock,
soi knew that it's unlocked. Am i wrong ? Guys i done both the first and the second method and all stuck in LG logo
in the first i used V20C_00.kdz and did the rights steps and also stuck !!!! so what now !!!!!!!!!!!!!!11
Click to expand...
Click to collapse
Try to flash V20A with LG Flash Tool and to unlock the bootloader this:
http://www.4shared.com/rar/HFf4newq/LGO4X-UNLOCK-BOOTLOADER.html
Hope it helps, I unlock mine with that, tooked me a few tries...
arrivals18 said:
Ok i already installed win. 7 and installed the tool that take really short time.
i connect the phone to usb in the mode and choose in the tool " recover from wrong update " it downloaded nearly 573 mb. and installed it in the phone, and when the phone restarts, the phone sticks in LG logo . SO what now !!!!!!!
Click to expand...
Click to collapse
The first thing to do if it sticks on the LG Logo is to boot into the LG recovery and do a factory reset - just to make sure. You often have to do this after flashing a new KDZ anyway.
RuedasLocas said:
Try to flash V20A with LG Flash Tool and to unlock the bootloader this:
http://www.4shared.com/rar/HFf4newq/LGO4X-UNLOCK-BOOTLOADER.html
Hope it helps, I unlock mine with that, tooked me a few tries...
Click to expand...
Click to collapse
OK look what i did :
1- connect device with usb cable and holding vol- till it get s/w update
2-when pressing adb reboot bootloader command it gives me unknown error
3- fastboot oem unlock : it gives me device not found
Also tried :
1- connect device to usb cable with holding power+ vol+ to recover mode
2-when pressing adb reboot bootloader command its ok
3- fastboot oem unlock : it gives me FAILED (command write failed (Unknown error))
finished. total time: 0.587s
SimonTS said:
The first thing to do if it sticks on the LG Logo is to boot into the LG recovery and do a factory reset - just to make sure. You often have to do this after flashing a new KDZ anyway.
Click to expand...
Click to collapse
HOW ?!!!!!!!!
when pressing power with vol+ it gives me the message " This mode is for data backup at service center. After removing and reattachment of battery press power key to reboot and keep using phone" so what how can wipe date/factory reset ?
Power and vol-, not+
Flying_Bear said:
Power and vol-, not+
Click to expand...
Click to collapse
yep yep yep it's done and now i see the rom >>> now can i root unlock bootloader flash to vanir or not ?
arrivals18 said:
yep yep yep it's done and now i see the rom >>> now can i root unlock bootloader flash to vanir or not ?
Click to expand...
Click to collapse
i told you earlier at my post here , that you dont need to flash kdz and go back to stock if ur final goal is a custom rom. u could reinstall recovery using adb bootloader. nevermind -_- u just do things harder for u. bootloader is unlocked u cant unlock the unlocked. bootloader isnt locking again when u just force the stock rom in. there is another procedure u must do to lock it. u can install recovery ( if u havent ) and just install a custom rom
EDIT: you dont need this anymore but ill explain.
adb is used to force files into the device. its a way to communicate with the phone using the pc. u can use the adb to install whatever u like but if u are not sure that the thing u are trying to install is ok for the device, then u will have a problem.
so , since your bootloader is already unlocked, you can go in adb bootloader and force the recovery in.
open cmd:
Lets say i use the teamwin recovery. ill rename it to be easy and save it to desktop. my file is: recovery.zip
open cmd as administrator and go to desktop: cd .....[path to ur desktop]
1. adb start-server
2. adb reboot bootloader
3. fastboot fash recovery recovery.zip
thats it. 3 commands is 10 seconds work. u dont need to go back to stock rom to install a custom rom.
Ok so I was going about Trying to flash TWRP it wouldnt go. Tried a few times etc, nothing, so i gave up.
Now when i reboot or turn off and power up, i get a N/A in the top corner for a few seconds but then it boots up fine. But i cannot do a backup & reset, and i cant get into recovery now.
I get a start up failed your devices didnt start up successfully use the software repair assiant on your computer,
bottom says ap fastboot flashmode secure
error: failed to load kernel
fastboot reason: fall-through from recovery boot mode
but i can toggle to Start and it boots fine.
Computer now does not see the phone when i plug it in, it dont make a sound and is not in the device manager, also when i reboot to fastboot, it still isnt seen at all. flashing_unlocked so i can flash. but cant use adb since pc wont reconize phone now, and i cant reset.
So i can use the phone like normal atleast, but cant reset or access recovery. its like it just inst there
any ideas???
Thanks
Ok so the computer don't even ding when ya plug the phone I to it. On any computer I use. Is there a corrupted file that the phone uses when connecting to a computer... ?
Phone works fine.. just recovery is missing.. and with no way use to use adb... Is there any way to get the recovery back on?
Jtaxel said:
Ok so the computer don't even ding when ya plug the phone I to it. On any computer I use. Is there a corrupted file that the phone uses when connecting to a computer... ?
Phone works fine.. just recovery is missing.. and with no way use to use adb... Is there any way to get the recovery back on?
Click to expand...
Click to collapse
It would help to know what model your device is for one thing. Also, what command exactly did you use to flash the recovery? It almost sounds like you flashed the recovery to the wrong place or you did the erase command before trying to flash and borked the recovery partition.
ok,
Moto e4 plus, andrid 7.1.1
I did unlock the boot loader.
Security Patch - July 1 2018
Owens
xt1775
The TWRP on this site from git hub was only a zip file not in .img format, so i went TWRP official site and downloaded the one for the moto e4 plus
Put all files where they supposed to. did the adb,
first typed fastboot flash recovery.img that didnt work nothing at all, then did the right way,
fastboot flash recovery recovery.img, didnt work it was able to boot to recovery from adb, but not flash it.
tried a few times, no go, so after that, wheni reboot my phone, it goes straight to the bootloader screen and and says,
start up failed
your device didnt start up successfully use the software repair assisant on your omputer to repair your device.
ap fastboot mode ( secure)
error failed to load kernel!
fastbootReason: Fa;;-through from recovery boot mode
i can arrow down to start and it will start fine ( boot phone up normally )just goes to the n/a in top left for about 10 seconds then starts up normal. But i can NOW adb into my phone again and its reconized by the computer.
did i flash the wrong twrp?
Thanks
switch tools mode
ap fastboot mode (secure)
flashing_unlocked
gives cou emmc dram all that info also
Jtaxel said:
ok,
Moto e4 plus, andrid 7.1.1
I did unlock the boot loader.
Security Patch - July 1 2018
Owens
xt1775
The TWRP on this site from git hub was only a zip file not in .img format, so i went TWRP official site and downloaded the one for the moto e4 plus
Put all files where they supposed to. did the adb,
first typed fastboot flash recovery.img that didnt work nothing at all, then did the right way,
fastboot flash recovery recovery.img, didnt work it was able to boot to recovery from adb, but not flash it.
tried a few times, no go, so after that, wheni reboot my phone, it goes straight to the bootloader screen and and says,
start up failed
your device didnt start up successfully use the software repair assisant on your omputer to repair your device.
ap fastboot mode ( secure)
error failed to load kernel!
fastbootReason: Fa;;-through from recovery boot mode
i can arrow down to start and it will start fine ( boot phone up normally )just goes to the n/a in top left for about 10 seconds then starts up normal. But i can NOW adb into my phone again and its reconized by the computer.
did i flash the wrong twrp?
Thanks
switch tools mode
ap fastboot mode (secure)
flashing_unlocked
gives cou emmc dram all that info also
Click to expand...
Click to collapse
Try this twrp. It should work fine. Change the name to recovery.img and flash it
https://github.com/TwrpBuilder/andr...s/tag/TWRP-3.2.3-TwrpBuilder-2018-08-21_14-10
Jtaxel said:
The TWRP on this site from git hub was only a zip file not in .img format,
Click to expand...
Click to collapse
You unzip to extract the img file.
ST Dog said:
You unzip to extract the img file.
Click to expand...
Click to collapse
yep downloaded zip, extracted folder, just shows all the files, in a folder, not an image file
Jtaxel said:
yep downloaded zip, extracted folder, just shows all the files, in a folder, not an image file
Click to expand...
Click to collapse
That is the source not the image. Click on the link that ends with .img not .tar and you'll get an img
now if i try to fastboot boot recovery.img it boots to recovery but hangs on the recovery loading twrp screen.
and this error in adb now with any code i send
Jtaxel said:
now if i try to fastboot boot recovery.img it boots to recovery but hangs on the recovery loading twrp screen.
and this error in adb now with any code i send
Click to expand...
Click to collapse
You need to type in fastboot flash not fastboot boot. Boot will only "boot" the recovery but won't flash it onto your phone.
Jason M. said:
You need to type in fastboot flash not fastboot boot. Boot will only "boot" the recovery but won't flash it onto your phone.
Click to expand...
Click to collapse
yep i know, first time i tried this, it would boot when i type boot. BUT when i tried to FLASH it, it wouldnt flash and stay.
Now i cant even boot TWRP, just hangs on the TWRP logo screen. I let it sit for 5 mins, before it ould only take a few seconds.
BUT i am using the one from the offical site, not the one on github thats only a zip file.
unless someone has the img file from github.
BUT STILL like i said i get that error you see in CMD screenshot.
Jtaxel said:
yep i know, first time i tried this, it would boot when i type boot. BUT when i tried to FLASH it, it wouldnt flash and stay.
Now i cant even boot TWRP, just hangs on the TWRP logo screen. I let it sit for 5 mins, before it ould only take a few seconds.
BUT i am using the one from the offical site, not the one on github thats only a zip file.
unless someone has the img file from github.
BUT STILL like i said i get that error you see in CMD screenshot.
Click to expand...
Click to collapse
First of all that error is normal. Second, the img is right there on the page I posted the link to. I even posted a screenshot of me downloading it from there. I don't see any reason why I could download the img and you can't. I give up.
OK, sorry didnt see the link. I downloaded that, i flashed it. IT worked. But now when i reboot it goes straight to recovery. But i reboot to bootloader and start that way, no big deal.
Never seen those errors before, but yea it worked now, must have been the wrong TWRP. Works now. THank you
But whats the default password in TWRP
Jtaxel said:
OK, sorry didnt see the link. I downloaded that, i flashed it. IT worked. But now when i reboot it goes straight to recovery. But i reboot to bootloader and start that way, no big deal.
Never seen those errors before, but yea it worked now, must have been the wrong TWRP. Works now. THank you
But whats the default password in TWRP
Click to expand...
Click to collapse
Np. That's why we have a thanks button though. To fix your booting problem you can try connecting your phone to your PC and booting to the bootloader and run this command with fastboot:
fastboot oem fb_mode_clear
That should do it.
Jason M. said:
Np. That's why we have a thanks button though. To fix your booting problem you can try connecting your phone to your PC and booting to the bootloader and run this command with fastboot:
fastboot oem fb_mode_clear
That should do it.
Click to expand...
Click to collapse
tried a couple times, no go, thats ok tho.
But i cant flash nothing because its asking for a password to mount.
Jtaxel said:
tried a couple times, no go, thats ok tho.
But i cant flash nothing because its asking for a password to mount.
Click to expand...
Click to collapse
Ok, try:
fastboot erase DDR
That should solve your booting problem. I knew it was one or the other. Ignore the twrp asking for password and click on the mount settings and you'll see a little check box that says "mount system read only". Uncheck that box
password fixed, i flashed the no verify and super, and it wiped my phone, is that normal, just wondering ,
yes i made a backup
Jtaxel said:
password fixed, i flashed the no verify and super, and it wiped my phone, is that normal, just wondering ,
yes i made a backup
Click to expand...
Click to collapse
If you flashed the force encrypt noverity zip yes. If you don't want enryption or want it to be optional to encrypt use the one that says opt encrypt. This is all gone over possibly hundreds of times in numerous threads. You should do a little searching and reading.
Jtaxel said:
yep downloaded zip, extracted folder, just shows all the files, in a folder, not an image file
Click to expand...
Click to collapse
My bad. Often a .img file is zipped because .img gets treated as a picture.
And you can also extract .img files from flashable zip releases.
Didn't think you might have grabbed a source code zip.
So using a root app disabler I disabled "telephony service" and when I restarted it shutdown immediately, on the newest WW rom it doesnt have a recovery so I cant go in there and wipe to factory reset. Right now I'm getting slot_b is unbootable. My computer recognizes the phone as "Android Bootloader Interface" but when I run "adb devices" it doesnt show up and I cant run fastboot commands even though I'm plugged into the side usb port. Please help me.
trustedenemy said:
So using a root app disabler I disabled "telephony service" and when I restarted it shutdown immediately, on the newest WW rom it doesnt have a recovery so I cant go in there and wipe to factory reset. Right now I'm getting slot_b is unbootable. My computer recognizes the phone as "Android Bootloader Interface" but when I run "adb devices" it doesnt show up and I cant run fastboot commands even though I'm plugged into the side usb port. Please help me.
Click to expand...
Click to collapse
Was the boot img rooted, is that why you have no recovery? If so, just boot to fastboot mode and flash stock boot instead of root, that should have recovery
trustedenemy said:
So using a root app disabler I disabled "telephony service" and when I restarted it shutdown immediately, on the newest WW rom it doesnt have a recovery so I cant go in there and wipe to factory reset. Right now I'm getting slot_b is unbootable. My computer recognizes the phone as "Android Bootloader Interface" but when I run "adb devices" it doesnt show up and I cant run fastboot commands even though I'm plugged into the side usb port. Please help me.
Click to expand...
Click to collapse
Can you go to bootloader screen ?
If you can
Just use the full stock Rom
Flash it
---------- Post added at 04:45 PM ---------- Previous post was at 04:42 PM ----------
https://drive.google.com/file/d/1M2V1Jh2CS5vt1xbQYlDvhxfu0yB6hmZi/view
Download the Full Rom
Extract it
Use the exe file to install with bootloader screen
Ok that was able to get me back to recovery, I tried to wipe and then boot into android, didn't work got the "your device is corrupt and cannot be trusted and will not boot". Still isn't recognized in adb devices so I don't know how I would proceed from here. My device is the Tencent Edition if that helps with raw firmware/rom.
P.S Thank you guys so much for your help I really appreciate it.
trustedenemy said:
Ok that was able to get me back to recovery, I tried to wipe and then boot into android, didn't work got the "your device is corrupt and cannot be trusted and will not boot". Still isn't recognized in adb devices so I don't know how I would proceed from here. My device is the Tencent Edition if that helps with raw firmware/rom.
P.S Thank you guys so much for your help I really appreciate it.
Click to expand...
Click to collapse
Did you fix it ?
rowihel2012 said:
Did you fix it ?
Click to expand...
Click to collapse
No, I still cannot boot into android and it still isnt recognized in adb devices, but I can get into recovery now.
trustedenemy said:
No, I still cannot boot into android and it still isnt recognized in adb devices, but I can get into recovery now.
Click to expand...
Click to collapse
But you get fastboot mode, just plug the USB in side port and flash latest raw WW Rom.
Here's the link to 1908.21
https://drive.google.com/file/d/13Mgz9GhopE-DUsGT3N_5qC283cKkUxYb/view?usp=drivesdk
Once in fastboot mode (the first menu you see, before selecting recovery, start, power off etc is fastboot mode) check your device is recognised with fastboot devices cmd and then run flashall_AFT.cmd that'll get back your working rom . But also, delete or move the original zip from that same extracted folder, the raw rom with the same name confuses the flashall_AFT.cmd
So I flash the most recent firmware you linked and double checked in recovery that it was pushed to the device and it was, but when I try to boot into android I get the asus logo for a second and then it restarts and it will give me a screen that says "Your device is corrupt. It cant be trusted and will not boot" and then has a link to google support .
trustedenemy said:
So I flash the most recent firmware you linked and double checked in recovery that it was pushed to the device and it was, but when I try to boot into android I get the asus logo for a second and then it restarts and it will give me a screen that says "Your device is corrupt. It cant be trusted and will not boot" and then has a link to google support .
Click to expand...
Click to collapse
Did you let the raw rom flash entirely? It should take a minimum of 10 minutes... The phone should reboot twice (I think) as it completes... Maybe try again, but I'm not familiar with that message...
If the phone doesn't reboot, I would let it run for a half hour or so before rebooting...
There we go, I got it to work man, I was just being impatient with the firmware flash but now I got it to work I appreciate your help and patience so much let me got through and thank your comments and then you can flag a mod to take down this thread. Thank you
trustedenemy said:
There we go, I got it to work man, I was just being impatient with the firmware flash but now I got it to work I appreciate your help and patience so much let me got through and thank your comments and then you can flag a mod to take down this thread. Thank you
Click to expand...
Click to collapse
Excellent, glad you got it working again
trustedenemy said:
There we go, I got it to work man, I was just being impatient with the firmware flash but now I got it to work I appreciate your help and patience so much let me got through and thank your comments and then you can flag a mod to take down this thread. Thank you
Click to expand...
Click to collapse
Yes this way always fix bootloap problem
Thanks asus for this easy flashing
I can't boot the phone into android or recovery mode.
Every time I try the phone just turns off, back on and then stays on the powered by android screen. I can boot into fastboot mode though.
Any ideas?
TooMuchSoySauce said:
I can't boot the phone into android or recovery mode.
Every time I try the phone just turns off, back on and then stays on the powered by android screen. I can boot into fastboot mode though.
Any ideas?
Click to expand...
Click to collapse
Make sure you're experienced with things like this before you do it. Fastboot mode is how you flash ROMs. You can flash the stock ROM, or any other ROMs that the Razer Phone 2 supports.
TooMuchSoySauce said:
I can't boot the phone into android or recovery mode.
Every time I try the phone just turns off, back on and then stays on the powered by android screen. I can boot into fastboot mode though.
Any ideas?
Click to expand...
Click to collapse
Are you booted up yet? :cyclops:
AshtonGamer said:
Make sure you're experienced with things like this before you do it. Fastboot mode is how you flash ROMs. You can flash the stock ROM, or any other ROMs that the Razer Phone 2 supports.
Click to expand...
Click to collapse
Yeah it wasn't a great idea in hindsight but I thought it couldn't be too hard. I was wrong. Anyway how do I properly flash a ROM? I've downloaded the stock razer one and ran "flash_all.bat" in minimal adb and fastboot but it says no such file or directory.
Also I can get into recovery mode now.
JDBarlow said:
Are you booted up yet? :cyclops:
Click to expand...
Click to collapse
No. Haven't really had any good ideas.
TooMuchSoySauce said:
Yeah it wasn't a great idea in hindsight but I thought it couldn't be too hard. I was wrong. Anyway how do I properly flash a ROM? I've downloaded the stock razer one and ran "flash_all.bat" in minimal adb and fastboot but it says no such file or directory.
Also I can get into recovery mode now.
Click to expand...
Click to collapse
Copy adb.exe and fastboot.exe into the same directory as flash_all.bat. If you look at the batch file, its calling for those files. Be sure to also extract the zip first too.
TooMuchSoySauce said:
No. Haven't really had any good ideas.
Click to expand...
Click to collapse
jonchance_84 said:
Copy adb.exe and fastboot.exe into the same directory as flash_all.bat. If you look at the batch file, its calling for those files. Be sure to also extract the zip first too.
Click to expand...
Click to collapse
Better yet extract the whole image you downloaded into the same folder you have minimal adb installed.
Then double click the flash_all.bat file it should open a command window and start installing on its own.
Let us know!! :good:
JDBarlow said:
Better yet extract the whole image you downloaded into the same folder you have minimal adb installed.
Then double click the flash_all.bat file it should open a command window and start installing on its own.
Let us know!! :good:
Click to expand...
Click to collapse
Sorry for being gone so long. I tried that but when i try to run flash_all.bat a window pops up for less than a second and nothing happens. Maybe I messed something up? On the phone im on the screen that shows the options: Restart bootloader, Unlock bootloader [Unlocked], Recovery mode, Wipe Userdata, and Power Off. Recovery mode just restarts back to the bootloop.
TooMuchSoySauce said:
Sorry for being gone so long. I tried that but when i try to run flash_all.bat a window pops up for less than a second and nothing happens. Maybe I messed something up? On the phone im on the screen that shows the options: Restart bootloader, Unlock bootloader [Unlocked], Recovery mode, Wipe Userdata, and Power Off. Recovery mode just restarts back to the bootloop.
Click to expand...
Click to collapse
Im in the same boat as you. Anything yet?
mps105 said:
Im in the same boat as you. Anything yet?
Click to expand...
Click to collapse
I've had no luck with anything. Been trying to get into recovery mode as I remember that having something to do with flashing ROMs like having to swipe something at the bottom of the screen to proceed but i still can't get into recovery mode. It just restarts the phone and back to the powered by android screen. I'll make sure to update you if anything exciting happens.