Hi everyone,
I would use my mouse/usb key on my HTC desire 510. If i understood after my researches,that's not possible on all smartphone...
So, is that possible on our HTC ?
Thanks for your future answers !
yes our stock kernel supports usb otg, as well as supplying power out. i use a 32gb sandisk usb flash drive with my 510.
Thanks for your answer.
So, i bought this the hama otg (i cannot send a link) but when i plug it in my phone, i get a message like "Phone in host mode, impossible to..."
I root it with your img.
alain21218 said:
Thanks for your answer.
So, i bought this the hama otg (i cannot send a link) but when i plug it in my phone, i get a message like "Phone in host mode, impossible to..."
I root it with your img.
Click to expand...
Click to collapse
It shouldn't be much of an issue. It does that for me too but still works, do any other errors present themselves?
Sent from my XT1028 using XDA Free mobile app
Well, i just plug the otg in my phone, without other usb. It show me "Phone in USB host". I tried with OTG checker, my kernel is ok but no signal detected by the application.
I tried to turn off the phone, & remove the battery, then put in again & turn on. When i plug in the OTG, nothing appened for a moment then the cursor of the mouse that i connected in the OTG appear for just 1 second, like a flash & the message back again.
No other problems
Today i tried to make my own OTG usb to see if the problem is the phone or the OTG hama.
When i plug my own OTG usb, nothing happen. When i plug the other OTG i just get the same message i said in my previous answers, nothing else happen.
Any idea ? I don't know but is anything i have to do like turn ON USB debug or anything else ?
Edit: I got a Xperia today to try my OTG, it seems that he works well so i just need to ask: Is the HTC desire 510 64bits EU is compatible OTG ? If it is, why my phone don't recognised my OTG ?
Still need some answers here
It just not support USB HID over USB (mouse and keyboard). Could've been disabled by HTC (reason for cursor disappearing after 1 sec of plugging in).
Sent from my XT1028 using XDA Free mobile app
Hi ! Sorry for insisting but i read on official htc web site that the htc desire 510 support usb storage. So, why nothing else that the previous message happen.
I bought another OTG today & it's forever the same...
I want to bump this topic, I have european 64-bit version and when I connect OTG cable there's info shown about phone being in usb host mode but nothing else is happening.
My thought is that tey give this option to 32-bit US version and then disable it (clumsy) in european version.
Sorry for grammar, english is not my native language.
I dont personally own a desire 510 but I know that 90% of otg issues are with the cable... Try another cable because all are not the same...
undeadking said:
I dont personally own a desire 510 but I know that 90% of otg issues are with the cable... Try another cable because all are not the same...
Click to expand...
Click to collapse
I have two cables, both work great wirh other devices .
Hi,Have u already fix ur desire 510 problems?
I already changed 3 different otg cables, seems like the same problem as u met....Any suggestions?
I had that issue when I flashed a moded kernel. Had to go back to a stock kernel and it fixed the usb issue
Sent from my 0PCV1 using XDA Free mobile app
USB OTG pops up a message in the notifications bar to let you know that you cannot simultaneously charge your device and utilise an USB device. The only reason that I can think of why the mouse cursor would disappear after a second is because you have your finger on the screen. I use my OTG with my digital camera (via Google Photos), USB Keyboard, USB Mouse, another Android device, and a 64GB flash drive almost daily, and I don't seem to have any problems.
Hello,can you please explain the details for that?
Crutchie46 said:
I had that issue when I flashed a moded kernel. Had to go back to a stock kernel and it fixed the usb issue
Sent from my 0PCV1 using XDA Free mobile app
Click to expand...
Click to collapse
I mean,,,I dont know how to go back to a stock kernel, should I root the phone?I really need this otg function for my desire 510 as I dont have enough money to buy another android phone. Appreciate for your help!
healthybanian said:
I mean,,,I dont know how to go back to a stock kernel, should I root the phone?I really need this otg function for my desire 510 as I dont have enough money to buy another android phone. Appreciate for your help!
Click to expand...
Click to collapse
If your phone is not rooted and doesn't have a custom recovery installed on it then there is no way possible that you're using a different kernel, that means that you already have the stock kernel! Is your phone 64 bit?
MrMike2182 said:
If your phone is not rooted and doesn't have a custom recovery installed on it then there is no way possible that you're using a different kernel, that means that you already have the stock kernel! Is your phone 64 bit?
Click to expand...
Click to collapse
I am not sure, the kernel version is 3.1028-g72f7e8d and @AbM103#1 SMP PREEMPT, the last two digits of serial number is 64 so does this mean it is 64bit? Thanks in advance
healthybanian said:
I am not sure, the kernel version is 3.1028-g72f7e8d and @AbM103#1 SMP PREEMPT, the last two digits of serial number is 64 so does this mean it is 64bit? Thanks in advance
Click to expand...
Click to collapse
Where are you from? If you're in the USA then it more than likely is 32 bit but if you're in another Country it's a really good chance that you're using a 64 bit and from what I've read about it the 64 bit for some reason or another doesn't work correctly with the usb otg and I can't exactly do anything to help with that since I don't have access to any 64 bit phones.
MrMike2182 said:
Where are you from? If you're in the USA then it more than likely is 32 bit but if you're in another Country it's a really good chance that you're using a 64 bit and from what I've read about it the 64 bit for some reason or another doesn't work correctly with the usb otg and I can't exactly do anything to help with that since I don't have access to any 64 bit phones.
Click to expand...
Click to collapse
Australia...probably it was ordered from USA , I will ask the one who ordered this phone,,,Thanks for your help
Related
I have tried both 64 and 34 bit drivers from Designgears odin one click stock ROM.
and cant get it to work!!! I am on Vista 64 Bit system
I need help!!
b-eock said:
I have tried both 64 and 34 bit drivers from Designgears odin one click stock ROM.
and cant get it to work!!! I am on Vista 64 Bit system
I need help!!
Click to expand...
Click to collapse
Try these: http://downloadcenter.samsung.com/c...3/SGH-i897_Captivate_USB_Drivers_5_02_0_2.zip
Drivers straight from samsung.
Edit: if you are trying to mount your phone as USB drive and are on miui or cm7 you need to install the nexus s drivers then. Samsung drivers will still work for download mode. A computer restart sometime does wonders too.
Sent from my SGH-I896 running MIUI.
I forgot I used those already too.
Sent from my HTC Inspire 4G using XDA App
When you installed the drivers, did you right click and run as administrator?
It would be helpful to know what mode you are trying to connect in, download mode, usb mass media, usb drive or tethering. Did you install heimdall by any chance? On your phone switch to a different option under usb settings and see if your computer will detect your phone then. Sometimes if you install a new rom, usb drive wont work until you switch it to mass media then back to usb drive.
Sent from my SGH-I896 running MIUI.
I had to grant administrator permission when I ran the installation, but I didn't right click and give it permissions from the start.
And I'm trying to connect in download mode.
Its only on eclair that it doesn't wanna see the phone, idk why. It saw it on MIUI(on I897 GB BL) but not on eclair/froyo BL
Sent from my I897 using xda premium
Have you tried downloading Kies (the full version, not mini) and reinstalling the drivers that come with it (they are under tools)?
I will try that, would you link me to it, cuz the last full kies I put on was in Chinese
I'm on my mobile. Go to Samsung home page. At the very bottom, you will see a tiny US flag. Click that, and you can change your location to the UK. Then just go to support
Thanks!!, I spanked your thank key!
Kies Mini is the only one that shows up for the Captivate specifically.
I dont see a full kies.
Didnt work..
Have you tried different cables? Different USB Ports? I'm beginning to think it may be a hardware problem, not software.
Had same problem before. It was the crappy USB cable u get with the phone. Switched it with a better cable and had no problems after that.
Sent from captivate running fasty 1.3
fastlude said:
Had same problem before. It was the crappy USB cable u get with the phone. Switched it with a better cable and had no problems after that.
Sent from captivate running fasty 1.3
Click to expand...
Click to collapse
The cable isnt crappy it like everything else gets worn out with regular use. Kinda like my knees.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
I haven't tried a different cable, I will now., but it has never(not once) given me issues on my old computer(win XP)
I've had the same issue before. Get pdanet. That fixed it. and now I never have recognition issues (just don't forget to make sure usb debugging is enabled).
Crazy thing happened. I deleted all traces of Samsung from my computer and then restarted and left alone for awhile, then Viola it worked(WTF!!!!) I dont even have the drivers installed( after uninstalling them I deleted all Samsung Folders in Program files and Program Files(x86).
Its weird but im happy now thanks all of you for helping !!!!!!!!!
I also used my little Bro's HTC Inspire Cable instead of the OEM cable.
Did u try it with the other cable when u did this? Or with the stock cable?
Sent from my SAMSUNG-SGH-I897 using XDA App
I would buy a new cable on Amazon. Stock cable is literally less than$2
Hello,
The OTG technology ( On The Go / USB Host ) works with the LG Optimus 4X ?
Thanks.
OTG work all ICS. But it not work on 4xHD.
Will root enable it?
monthirut said:
OTG work all ICS. But it not work on 4xHD.
Click to expand...
Click to collapse
Why !?
can be the root we can activate the OTG, as was done for the HTC One X (EternityProject Kernel) and the Nexus S! (stickmoun)
you think the update to Android 4.1 will add the USB Host?
USB OTG really a no go for the O4X?
i've just got off the phone with LG uk, they told me that the phone has usb host support but it's on the phones with ics not gingerbread.
can anyone confirm this?
mabz2k said:
i've just got off the phone with LG uk, they told me that the phone has usb host support but it's on the phones with ics not gingerbread.
can anyone confirm this?
Click to expand...
Click to collapse
There are no O4X phones with gingerbread at all...
the person I talked to said they used gingerbread on it, I'm guessing it was an Early version. But if it has ics on it and usb host doesn't work I'd complain to them. Obviously make sure i am using the correct cable before hand so it's not user error.
if i can get this phone once it's released in the UK I'll probably try this out.
Cable is connected and it does not work. Unfortunately, no device is detected. The device is rooted. Somebody news?
antiself said:
Cable is connected and it does not work. Unfortunately, no device is detected. The device is rooted. Somebody news?
Click to expand...
Click to collapse
OTG is not enabled in the kernel. This feature is not compilable as a module as far as I know, and hence the bootloader is locked, we cannot use a custom kernel (kexec is also disabled).
already root my LG Optimus 4X HD still no hope using OTG
little dissapoint in here
someone have solution ?
nolimit88 said:
already root my LG Optimus 4X HD still no hope using OTG
little dissapoint in here
someone have solution ?
Click to expand...
Click to collapse
Rooting alone will not magically enable OTG. Rooting your phone but not doing anything else doesn't make any difference besides voiding your warranty.
L2Deliver said:
Rooting alone will not magically enable OTG. Rooting your phone but not doing anything else doesn't make any difference besides voiding your warranty.
Click to expand...
Click to collapse
Rooting your phone does NOT void your warranty. It is a simple matter to unroot if you need to send the phone back for repairs - and if it is so badly screwed that you can't unroot it then it is highly unlikely the service centre would be able to tell that you had rooted it in the first place.
Messing around with your bootloader, using an XTC-Clip to gain S-Off (as I had to do with my old HTC DS) and stuff like that, however, does run the risk of voiding your warranty - but even then they cannot refuse to fix a genuine hardware problem unless they can prove you caused it by your actions.
Hey guys,maybe you can try this step :
1.root your HH
2.install "android terminal emulator"
3.when it's asked...choose 'grant'
4.enjoy
Thats all
Sent from my LG-P880 using xda app-developers app
ChanixHadez said:
Hey guys,maybe you can try this step :
1.root your HH
2.install "android terminal emulator"
3.when it's asked...choose 'grant'
4.enjoy
Thats all
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Can you elaborate mate, on what this is and what it does?
Feregorn said:
Can you elaborate mate, on wha this is and what it does?
Click to expand...
Click to collapse
It achieves nothing. This guy appears (I may be wrong) to simply be spamming to try and make himself look intelligent - yet he doesn't know the difference between odexed & de-odexed. I would be tempted to ignore anything he posts until he can be verified as trustworthy.
SimonTS said:
It achieves nothing. This guy appears (I may be wrong) to simply be spamming to try and make himself look intelligent - yet he doesn't know the difference between odexed & de-odexed. I would be tempted to ignore anything he posts until he can be verified as trustworthy.
Click to expand...
Click to collapse
I don't know if you're right or, if you're right... probably you're right.
Hi guys
my cell phone's (usb otg) doesn't work too ((optimus 4x hd))
it's not possible
i connected a mouse but it didn't work correctly
the other android phones can work with mouse and keyboard without any problem
but in 4x when i'm connecting any hardware it doesn't happen any things
i installed usb storage manager and usb host controller but they didn't work
at the first i thought my usb otg cable broken
what about you ?
This needs a newer kernel, so with version 2.6.x it won't work.
Hi,
I used a tivizen pico USB DVB-T Micro USB Dongle on my Xperia Arc and on my Xperia V.
But HTC One says "Device not supported" and (when dongled off) "Device cannot be charged"
HTC Support says USB Host Mode is not supported and only following protocols would work on thieir devices :
Charging
Mass Storage
Media Transfer
PC Connection Mode
But I can use a Wireless dongle via OTG Cable (for Keyboard/Touchpad Use) without problems.
Does this not use USB the Host mode protocol ???
Anybody here who is deeper in the matter to help me solving my confusion ?
Anybody knows if HTC One can recognize the device
(My One is rooted)
Thanks
gersi / Germany
AW: HTC One and USB Host Mode (for DVB-T Dongle)
Also no Support to connect a DSLR via otg cable? Damn HTC ... big fail -,-
Gesendet von meinem HTC Sensation JB 4.2.2
creonx said:
Also no Support to connect a DSLR via otg cable? Damn HTC ... big fail -,-
Gesendet von meinem HTC Sensation JB 4.2.2
Click to expand...
Click to collapse
You can flash custom kernel to get it working. The HTC One USB OTG is buggy. Flash this kernel and check if its working let me know as well so that I can root my phone otherwise I dont want to root.
http://forum.xda-developers.com/showthread.php?t=2255160
bhushangahire said:
You can flash custom kernel to get it working. The HTC One USB OTG is buggy. Flash this kernel and check if its working let me know as well so that I can root my phone otherwise I dont want to root.
http://forum.xda-developers.com/showthread.php?t=2255160
Click to expand...
Click to collapse
i have buy this dvb-t stick on amazon http://www.amazon.de/gp/product/B00DZP7L3G/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
venom 1.2.1 sense5 rom whis stock kernel dont workt
teamsevenkernel dont work
but the elementalx kernel works fine http://forum.xda-developers.com/showthread.php?t=2249774
DVB-T yes ...but no cam anymore..
masaka_v2 said:
i have buy this dvb-t stick on amazon http://www.amazon.de/gp/product/B00DZP7L3G/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
venom 1.2.1 sense5 rom whis stock kernel dont workt
teamsevenkernel dont work
but the elementalx kernel works fine http://forum.xda-developers.com/showthread.php?t=2249774
Click to expand...
Click to collapse
I tried elementaryX 1.1 too :
DVB-T Yes
but no cam. :crying:
Seems to be, that cam only works when I upgrade to ROM 4.2.2 (I have Stock 4.1.2)
****, then I need to install everything new via backup or manually...
P.
I am running the Sprint HtcOne with ViperOne rom 5.7 and Most Thumb drives work with the OTG cable (Except 16GIG PNY will NOT work )
Generic , Toshiba ,and SanDisk seem ok from there 2 gig to 32 gig thumb drives. I use the SanDisk as a storage when I backup my phone through TWRP for recovery.
I do have a Mobius Action camera (physical size of camera is not much larger than a thumb drive.which has a 32 SanDisk in it and IT will NOT work as a Thumb drive even though the Sellers of this Camera says it will work as a thumb drive on mobile phones running Android but so far I have tried many phones ( HtcOne,Samsung S4 ) have NOT been able to get it to work. I only get a message ( can not charge device )
I have never tried that TV tuner but I would like to try it and see if it would work.
Where else would I get one of those at a reasonable price.
Trying to unlock my bootloader, but when in bootloader mode and plugging my HTC one into my computer it saids "USB not Recognized."
Does anyone have any solutions for this? Can't seen to find one
Also side question, does rooting my phone hamper my ability to get system updates from HTC?
Do you have htc driver installed?
However, yes, you will lose OTA update from HTC
Guich said:
Do you have htc driver installed?
However, yes, you will lose OTA update from HTC
Click to expand...
Click to collapse
Yes I do, installed sync manager and everything. Not sure whats wrong
T3hBraveBoss said:
Yes I do, installed sync manager and everything. Not sure whats wrong
Click to expand...
Click to collapse
adb will recognize your phone?
However, which os you have?
Make sure you're plugged into a USB 2.0 port. 3.0 ports don't work with ADB on my laptop.
PcFish said:
Make sure you're plugged into a USB 2.0 port. 3.0 ports don't work with ADB on my laptop.
Click to expand...
Click to collapse
I have a Retina MacBook Pro, all my ports are USB 3.0
Guich said:
adb will recognize your phone?
However, which os you have?
Click to expand...
Click to collapse
4.1 For the HTC One
T3hBraveBoss said:
I have a Retina MacBook Pro, all my ports are USB 3.0
Click to expand...
Click to collapse
Oh, I've never worked on a mac before, but my HP Envy running Windows 8 would give me that message when I tried to do anything in a 3.0 port, but my 2.0 port works fine.
PcFish said:
Oh, I've never worked on a mac before, but my HP Envy running Windows 8 would give me that message when I tried to do anything in a 3.0 port, but my 2.0 port works fine.
Click to expand...
Click to collapse
Im running Windows 8 on it
Ok, tried some minutes ago, with an usb 3.0 it will not work...
Maybe, if someone have a mac, can confirm this.
Guich said:
Ok, tried some minutes ago, with an usb 3.0 it will not work...
Maybe, if someone have a mac, can confirm this.
Click to expand...
Click to collapse
So its directly related to USB 3.0.
"sigh" gotta pull out my old windows laptop then
Mac is basically linux, and from my experience with linux, you need to configure some stuff in order to get things working, i'm on the phone right now so i don't have a link to share but i recommend looking online.for.a tutorial to build AOSP from source on linux or MAC, there you will.find the steps needed to set up your USB configuration, ignore the rest after the config or.what is not needed.
Hope this helps.
Sent from my HTC One using xda app-developers app
Lexmazter said:
Mac is basically linux, and from my experience with linux, you need to configure some stuff in order to get things working, i'm on the phone right now so i don't have a link to share but i recommend looking online.for.a tutorial to build AOSP from source on linux or MAC, there you will.find the steps needed to set up your USB configuration, ignore the rest after the config or.what is not needed.
Hope this helps.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
I use windows on my mac, I use windows 8
I was unable to unlock on my mac. I found you just had to jiggle the micro usb connector and it was detected
Sent from my HTC One using xda premium
PcFish said:
Make sure you're plugged into a USB 2.0 port. 3.0 ports don't work with ADB on my laptop.
Click to expand...
Click to collapse
There's a fix for that! Follow this guide here and you should be all set.
evilcuber said:
I was unable to unlock on my mac. I found you just had to jiggle the micro usb connector and it was detected
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
Does this mac have USB 3.0?
Does anyone have any solutions
If you do a search on xda theres new drivers posted specifically for guys having usb issues with 64 bit windows 8.
Can't remember where exact I saw it myself or I'd post a link.
Sent from my fOne using xda premium
Guich said:
Ok, tried some minutes ago, with an usb 3.0 it will not work...
Maybe, if someone have a mac, can confirm this.
Click to expand...
Click to collapse
I am having the same problem with my asus and mac laptops. They both have the usb 3.0 and they wont read my htc one when in fastboot. Did anyone figure out a way around it?
I have an HTC ONE att
T3hBraveBoss said:
Trying to unlock my bootloader, but when in bootloader mode and plugging my HTC one into my computer it saids "USB not Recognized."
Does anyone have any solutions for this? Can't seen to find one
Also side question, does rooting my phone hamper my ability to get system updates from HTC?
Click to expand...
Click to collapse
I ws installing a Ruu zip but process got failed and hboot version changed to 1.54.000 . my device is in now relocked status and bootloader is not reconised by hp envy. adb still showing my device my i lost fastboot mode completely. Any solution there???
I already tried several drivers method. Error is something HTCAND4 in driver events log.
Hi, firts of all sorry for my english.
My sister give to me a BLU R1 HD 2GB RAM/16 ROM, it come without Amazon ads (so i think its OEM version). Its running BLU_R001UU_V21_GENERIC.
She told me that one day just not was recognized by PC to transfer files,photos, music. I make a wipe from recovery and still the problem no USB detection at all just charging, no sounds like new USB device was conected, no device on Device Manager.( i do this on diferents PC Windows 10, Windows 8, and Linux Elementary OS , Deeping OS)
I enable Developer Options and change MTP/PTP/Only Charge option and nothing happened; I opened the device to check the pins on the USB connector and check continuity and all seem like be perfect.
I thing that may be when was update to the last software something happen and lost USB recoginition, I want to Root the device and change Recovery but i see that the steps need connect the R1 HD to PC and make some things throw ADB console.
My question is: can i downgrade the original rom from SDcard in the actual Recovery.. to try recover the USB functions. or may be its something wrong on any internal chip that no make the USB conection.
Ty.
mykrov said:
Hi, firts of all sorry for my english.
My sister give to me a BLU R1 HD 2GB RAM/16 ROM, it come without Amazon ads (so i think its OEM version). Its running BLU_R001UU_V21_GENERIC.
She told me that one day just not was recognized by PC to transfer files,photos, music. I make a wipe from recovery and still the problem no USB detection at all just charging, no sounds like new USB device was conected, no device on Device Manager.( i do this on diferents PC Windows 10, Windows 8, and Linux Elementary OS , Deeping OS)
I enable Developer Options and change MTP/PTP/Only Charge option and nothing happened; I opened the device to check the pins on the USB connector and check continuity and all seem like be perfect.
I thing that may be when was update to the last software something happen and lost USB recoginition, I want to Root the device and change Recovery but i see that the steps need connect the R1 HD to PC and make some things throw ADB console.
My question is: can i downgrade the original rom from SDcard in the actual Recovery.. to try recover the USB functions. or may be its something wrong on any internal chip that no make the USB conection.
Ty.
Click to expand...
Click to collapse
I have not seen any other reports of usb dying after OtA update. You say you tried with different PC, what about using different usb cable?
But more bad news for your plans. If you have official v21 update, then you are not rootable anyway.
mrmazak said:
I have not seen any other reports of usb dying after OtA update. You say you tried with different PC, what about using different usb cable?
But more bad news for your plans. If you have official v21 update, then you are not rootable anyway.
Click to expand...
Click to collapse
I tried with diferents usb cables, and nothing happened.
mykrov said:
I tried with diferents usb cables, and nothing happened.
Click to expand...
Click to collapse
Do you know if any of them are sync cables??
codyalan said:
Do you know if any of them are sync cables??
Click to expand...
Click to collapse
They are USB cables that i use on others phones (lg 4x HD and Honor 6X) and work fine with those phones but not on my R1Hd
mykrov said:
Hi, firts of all sorry for my english.
My sister give to me a BLU R1 HD 2GB RAM/16 ROM, it come without Amazon ads (so i think its OEM version). Its running BLU_R001UU_V21_GENERIC.
She told me that one day just not was recognized by PC to transfer files,photos, music. I make a wipe from recovery and still the problem no USB detection at all just charging, no sounds like new USB device was conected, no device on Device Manager.( i do this on diferents PC Windows 10, Windows 8, and Linux Elementary OS , Deeping OS)
I enable Developer Options and change MTP/PTP/Only Charge option and nothing happened; I opened the device to check the pins on the USB connector and check continuity and all seem like be perfect.
I thing that may be when was update to the last software something happen and lost USB recoginition, I want to Root the device and change Recovery but i see that the steps need connect the R1 HD to PC and make some things throw ADB console.
My question is: can i downgrade the original rom from SDcard in the actual Recovery.. to try recover the USB functions. or may be its something wrong on any internal chip that no make the USB conection.
Ty.
Click to expand...
Click to collapse
I have the exact same issue... and it happened just after an OTA Update. After that it showed it was charging only when the phone was shut down.
No USB recognition whatsoever. PC/Mac. Tried several cables.... All USB modes... Factory Reset... Nothing made it work.
I contacted BLU with the issue. As soon as I have an answer (If ever) I will let you know.
If any of you know anything about this please share it here.
Oddly enough, After a cache wipe and factory reset, I have no ads on the lock screen. The app is running on the background but nothing shows up.
elcarmi said:
I have the exact same issue... and it happened just after an OTA Update. After that it showed it was charging only when the phone was shut down.
No USB recognition whatsoever. PC/Mac. Tried several cables.... All USB modes... Factory Reset... Nothing made it work.
I contacted BLU with the issue. As soon as I have an answer (If ever) I will let you know.
If any of you know anything about this please share it here.
Oddly enough, After a cache wipe and factory reset, I have no ads on the lock screen. The app is running on the background but nothing shows up.
Click to expand...
Click to collapse
I think if we can downgrade to a official rom under the actual recovery maybe that fix the USB. But all methods are under USB connection to PC.
mykrov said:
I think if we can downgrade to a official rom under the actual recovery maybe that fix the USB. But all methods are under USB connection to PC.
Click to expand...
Click to collapse
As far as I know downgrading is not possible without making the phone unusable. If by any chance that is possible maybe an update from an SD Card can work.