Cant downgrade from gpe / 5.01 - One (M7) Q&A, Help & Troubleshooting

Hi, Hope this post is in the right place, apologies if not.
I recently got a HTC One (M7) which was already unlocked, S-OFF and rooted and had 4.4 on it but i wanted to upgrade that OS so installed GPE and then it updated a few times to 5.01 which was all good but now i want to go back to 4.4 and this is the problem i'm having.
I'm in the UK using a O2 UK RUU file which i know does work but now when i go to use it i get as far as 'Checking Header' (5%) and thats it ..it wont go any further? I have tried in compatibility mode but that just returns errors.. I am using Fastboot & ADB tools and tried pushing the firmware but i'm really quite a novice when it comes t stuff like this ..
I tried fastboot getvar and all i get it a list of commands now which i dont understand
I do know my CID is 111111
Here's the Bootloader Info:
*** UNLOCKED***
M7 UL PVT SHIP S-OFF RH
CID 11111111
HBOOT 1.54.0000
RADIO 4T.30.3218.21
OPEN DSP v34.120.274.0429
OS 5.11. 1700 .3
All i want to do it flash the phone back to original Stock with OS 4.4 ..
also, when i try to go into recovery it wont let me, i get the green android laying on his back with a red exclamation on him and pressing up with power dont take me into recovery.
Any idea's please?
I would like to thank xda and it's members for all the help previously.. thanks guys

Craig_CFC said:
Hi, Hope this post is in the right place, apologies if not.
I recently got a HTC One (M7) which was already unlocked, S-OFF and rooted and had 4.4 on it but i wanted to upgrade that OS so installed GPE and then it updated a few times to 5.01 which was all good but now i want to go back to 4.4 and this is the problem i'm having.
I'm in the UK using a O2 UK RUU file which i know does work but now when i go to use it i get as far as 'Checking Header' (5%) and thats it ..it wont go any further? I have tried in compatibility mode but that just returns errors.. I am using Fastboot & ADB tools and tried pushing the firmware but i'm really quite a novice when it comes t stuff like this ..
I tried fastboot getvar and all i get it a list of commands now which i dont understand
I do know my CID is 111111
Here's the Bootloader Info:
*** UNLOCKED***
M7 UL PVT SHIP S-OFF RH
CID 11111111
HBOOT 1.54.0000
RADIO 4T.30.3218.21
OPEN DSP v34.120.274.0429
OS 5.11. 1700 .3
All i want to do it flash the phone back to original Stock with OS 4.4 ..
also, when i try to go into recovery it wont let me, i get the green android laying on his back with a red exclamation on him and pressing up with power dont take me into recovery.
Any idea's please?
I would like to thank xda and it's members for all the help previously.. thanks guys
Click to expand...
Click to collapse
Flash the firmware that matches your RUU first
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip
fastboot reboot-bootloader
then flash the RUU ... RUU gets stuck on the Hboot update step, flashing firmware first eliminates this problem

clsA said:
Flash the firmware that matches your RUU first
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip
fastboot reboot-bootloader
then flash the RUU ... RUU gets stuck on the Hboot update step, flashing firmware first eliminates this problem
Click to expand...
Click to collapse
Hi and thank you for your help.. i tried looking for the correct firmware.zip but after trying to flash it i get errors and 'fails' i'm not exactly sure which firmware i should be using - i did go to HTC site and selected what i thought were O2 UK FW files (1 was MR 3, 1 MR2 and 2 x zip files) so i assumed the .zip files were the FW files but its with these i got the errors. When i flashed them it did read them but aftr a few seconds returned a fail.
The RUU i am trying to put back on is RUU_M7_UL_K44_SENSE55_MR_O2_UK_4.20.206.16_Radio_4A.23.3263.28_10.38r.1157.04L_release_353143_signed_2 which i know works on my device as i used it before i installed the GPE.
Any ideas please? I'm sorry i cant provide any more information.
Getvar Info:
C:\Users\Craig\Desktop\platform-tools>fastboot g
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.09.401.5
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: o2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4097mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-5d4c562c
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.152s
C:\Users\Craig\Desktop\platform-tools>
Thanks again!

Craig_CFC said:
Hi and thank you for your help.. i tried looking for the correct firmware.zip but after trying to flash it i get errors and 'fails' i'm not exactly sure which firmware i should be using - i did go to HTC site and selected what i thought were O2 UK FW files (1 was MR 3, 1 MR2 and 2 x zip files) so i assumed the .zip files were the FW files but its with these i got the errors. When i flashed them it did read them but aftr a few seconds returned a fail.
The RUU i am trying to put back on is RUU_M7_UL_K44_SENSE55_MR_O2_UK_4.20.206.16_Radio_4A.23.3263.28_10.38r.1157.04L_release_353143_signed_2 which i know works on my device as i used it before i installed the GPE.
Any ideas please? I'm sorry i cant provide any more information.
Getvar Info:
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-main: 6.09.401.5
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: o2___001
(bootloader) security: off
all: Done!
finished. total time: 0.152s
C:\Users\Craig\Desktop\platform-tools>
Thanks again!
Click to expand...
Click to collapse
Well you phone is having a bit of an identity crises
you have hboot 1.54 ( assume it's the Dark bootloader for GPE)
your Firmware version is 6.x.401.x which is for the International version
and your CID is O2
I'm going to recommend you convert to International by changing you CID
fastboot oem writecid HTC__001
then flash this firmware
https://www.androidfilehost.com/?fid=23329332407574077
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip
fastboot reboot
followed by this RUU
http://www.androidruu.com/getdownlo...10.38r.1157.04L_release_353069_signed_2-1.exe
or
RUU_M7_UL_K44_SENSE55_MR_HTC_Europe_4.19.401.9_R_Radio_4A.23.3263.28_10.38r.1157.04L_release_353069_signed_2-1.exe - 1.50 GB

Maybe a little late but you could also try this:
http://forum.xda-developers.com/showthread.php?t=2358781
Go to post #2 and follow those instructions. Then flash whatever RUU you want.
I converted to GPE one time, didn't like it and also had trouble getting back to KK.

ANGRY_robert said:
Maybe a little late but you could also try this:
http://forum.xda-developers.com/showthread.php?t=2358781
Go to post #2 and follow those instructions. Then flash whatever RUU you want.
I converted to GPE one time, didn't like it and also had trouble getting back to KK.
Click to expand...
Click to collapse
Thanks again for the help.. much appreciated - im using TWRP v2.7 and wiped the whole phone by accident - i'm trying to push (adb sideload fw_4.19.401.9_custom.zip) but keeps coming back as no device - i have a yellow exclamation in device manager under 'other devices' 'one' and cant seem to find a windows 7 driver for this? once i can push or sideload the firmware i can flash it correct?
Thanks again

So to refresh my memory, you were on stock GPE and want to go back to stock sense correct? Now you have wiped the phone using twrp and twrp is all that is left?
Sent from my HTC One using XDA Free mobile app

ANGRY_robert said:
So to refresh my memory, you were on stock GPE and want to go back to stock sense correct? Now you have wiped the phone using twrp and twrp is all that is left?
Sent from my HTC One using XDA Free mobile app
Click to expand...
Click to collapse
Yes thats correct - i'm new to all this flashing stuff but have been reading lots of various posts on xda ...
This is whats returned from fastboot flash:
C:\Users\Craig\Desktop\platform-tools>fastboot flash zip fw_4.19.401.9_custom.zi
p
target reported max download size of 1526722560 bytes
sending 'zip' (27605 KB)...
OKAY [ 2.357s]
writing 'zip'...
FAILED (remote: not allowed)
finished. total time: 2.408s
C:\Users\Craig\Desktop\platform-tools>
and...
C:\Users\Craig\Desktop\platform-tools>adb push zip fw_4.19.401.9_custom.zip
adb server is out of date. killing...
* daemon started successfully *
error: device not found
i really dont know what to do now - i have all the correct files in the platform tools folder where i run the fastboot & adb commands (firmware & ruu) and have changed the CID to HTC___001
When i'm in recovery mode (TWRP) i get the yellow exclamation (screenshot hopefully attached)

First you need to get the driver working. Click on "one" and see if you can select from a list of devices on the pc. Now if the last working firmware on the phone was gpe then you need to push/sideload a gpe based Rom. This is because the partition structure is different than sense. You need to get a working Rom onto the phone first.
Sent from my HTC One using XDA Free mobile app

Craig_CFC said:
Yes thats correct - i'm new to all this flashing stuff but have been reading lots of various posts on xda ...
This is whats returned from fastboot flash:
C:\Users\Craig\Desktop\platform-tools>fastboot flash zip fw_4.19.401.9_custom.zi
p
target reported max download size of 1526722560 bytes
sending 'zip' (27605 KB)...
OKAY [ 2.357s]
writing 'zip'...
FAILED (remote: not allowed) You get this when the bootloader is locked did you relock the bootloader ?
finished. total time: 2.408s
C:\Users\Craig\Desktop\platform-tools>
and...
C:\Users\Craig\Desktop\platform-tools>adb push zip fw_4.19.401.9_custom.zip This is useless the firmware has to be flashed in fastboot RUU mode
adb server is out of date. killing...
* daemon started successfully *
error: device not found
i really dont know what to do now - i have all the correct files in the platform tools folder where i run the fastboot & adb commands (firmware & ruu) and have changed the CID to HTC___001
When i'm in recovery mode (TWRP) i get the yellow exclamation (screenshot hopefully attached)
Click to expand...
Click to collapse
Read my instructions again in post 4 and follow them
Your drivers are easy to fix see post 2 faq 2 here >> http://forum.xda-developers.com/showthread.php?t=2541082

clsA said:
Read my instructions again in post 4 and follow them
Your drivers are easy to fix see post 2 faq 2 here >> http://forum.xda-developers.com/showthread.php?t=2541082
Click to expand...
Click to collapse
Thank you clsA, i'm doing this now - flashed firmware success.. just adding the RUU now - will let you know how it goes

Craig_CFC said:
Thank you clsA, i'm doing this now - flashed firmware success.. just adding the RUU now - will let you know how it goes
Click to expand...
Click to collapse
All fixed thank you so much - back to good old KitKat thanks for all your help !! very very much appreciated

Craig_CFC said:
All fixed thank you so much - back to good old KitKat thanks for all your help !! very very much appreciated
Click to expand...
Click to collapse
your welcome // Please use the Thanks button below my name

clsA said:
your welcome // Please use the Thanks button below my name
Click to expand...
Click to collapse
Getvar Info:
C:\Users\Craig\Desktop\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.25.3263.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.401.11
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3860mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.076s
Thanks again, ive clicked the like button

Craig_CFC said:
Getvar Info:
C:\Users\Craig\Desktop\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.25.3263.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.401.11
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3860mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.076s
Thanks again, ive clicked the like button
Click to expand...
Click to collapse
Looks good .. you should get some OTA updates almost immediately

clsA said:
Looks good .. you should get some OTA updates almost immediately
Click to expand...
Click to collapse
Had 2 OTA's immediately - phone is running sweet again :good: :good:

Related

[Q] Struggling to Unroot Device

I wonder if anybody is able to assist at all?
I have a root HTC One M7 which I am having a lot of trouble returning to stock recovery. I am not using a custom ROM.
I've read multiple different forums and threads/techniques none of which I've been able to use successfully. Any help would be greatly appreciated.
The device is running Android v4.3 and when I went to identify the CID = GOOGL001
Which files should I be using to reflash the recovery?
Should the bootloader already be relocked?
I've seen all sorts of variance in advice but nothing which seems to work, and right now I have a device that will not boot properly, likely as the boot.img one of the techniques suggested was no good.
Thanks in advance. :cyclops:
Was it unlocked when you bought the device, if so, flash any unlocked ruu, this needs to be done using fastboot
Sent from my HTC One using XDA Premium 4 mobile app
speedyjay said:
Was it unlocked when you bought the device, if so, flash any unlocked ruu, this needs to be done using fastboot
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No it was locked.
Anybody else have any ideas?
the device is S-on and I cant change that as I can't boot the device through to the OS. Massive problems.
Has anybody discovered anything further on these devices with S-on? I managed to flash a Google Play edition firmware to the device which has it working and not rooted. However, it is not the correct firmware for the device and now I cannot update the device to new OS or some other things also like issues with WiFi etc..
Any help gratefully received. :fingers-crossed:
coligulus said:
Has anybody discovered anything further on these devices with S-on?
Click to expand...
Click to collapse
What do you mean here? What is your issue with the device and what is your goal?
alray said:
What do you mean here? What is your issue with the device and what is your goal?
Click to expand...
Click to collapse
Hi Alray, thanks for your response.
I have an HTC One M7 device which was rooted to conduct some research. I am trying to return the device to stock, not as I need a repair, just as I need a stock ROM back on the device. Due to the device being set to S-On I understood that there were some issues doing this. Subsequently when attempting to unroot I had a number of problems. The device was bricked for a long time. I finally found a Google Play version ROM for the HTC One which worked, however I have not been able to flash the stock recovery and thus I can now no longer use the OTA update function on the device.
Does that explain well enough or is there anything I can share to help with an answer. Thank you for taking the time to write.
coligulus said:
Hi Alray, thanks for your response.
I have an HTC One M7 device which was rooted to conduct some research. I am trying to return the device to stock, not as I need a repair, just as I need a stock ROM back on the device. Due to the device being set to S-On I understood that there were some issues doing this. Subsequently when attempting to unroot I had a number of problems. The device was bricked for a long time. I finally found a Google Play version ROM for the HTC One which worked, however I have not been able to flash the stock recovery and thus I can now no longer use the OTA update function on the device.
Does that explain well enough or is there anything I can share to help with an answer. Thank you for taking the time to write.
Click to expand...
Click to collapse
So yoou only need to flash the stock recovery for your phone?
please post the output of
Code:
fastboot getvar all
minus IMEI/SN
alray said:
So yoou only need to flash the stock recovery for your phone?
please post the output of
Code:
fastboot getvar all
minus IMEI/SN
Click to expand...
Click to collapse
Apologies for the delayed response.
ERROR: could not get pipe properties
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.18.3263.15
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.07.1700.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: ********
(bootloader) imei: ********
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: GOOGL001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3858mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-94cf81a8fd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
coligulus said:
Apologies for the delayed response.
ERROR: could not get pipe properties
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.18.3263.15
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.07.1700.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: ********
(bootloader) imei: ********
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: GOOGL001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3858mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-94cf81a8fd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
are you prompted there is an ota available.? If yes download it and extract the recovery.img file from the ota and then flash it to your phone.
Have you tried to restore your phone with this ruu.zip here?
alray said:
are you prompted there is an ota available.? If yes download it and extract the recovery.img file from the ota and then flash it to your phone.
Have you tried to restore your phone with this ruu.zip here?
Click to expand...
Click to collapse
Thanks for your response. I am prompted to update with an OTA KitKat update, however when selecting to update the device reboots to apply update but comes to Fastboot only and goes no further. How should I go about applying this update if not like that?
I am just downloading the RUU you linked to to see if that helps..
Thanks again.
coligulus said:
Thanks for your response. I am prompted to update with an OTA KitKat update, however when selecting to update the device reboots to apply update but comes to Fastboot only and goes no further. How should I go about applying this update if not like that?
I am just downloading the RUU you linked to to see if that helps..
Thanks again.
Click to expand...
Click to collapse
The response received when attempting to flash that RUU was as follows:
Downloads $ fastboot flash zip RUU\ Zip\ M7_Google\ Edition_4.4_3.58.1700.5.zip
ERROR: could not get pipe properties
target reported max download size of 1526722560 bytes
sending 'zip' (506183 KB)...
OKAY [ 17.258s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 70.149s
Any other ideas?

[q] no os in htc one

Hi ,
i have a HTC ONE mobile phone, few days before i tried to install cyangonMod but unfortunately due to faulty USB my installation broke up.
so i ended up with no OS installed on my HTC ONE. later i searched out the forum and rooted back to the ROM as it was.
i founded links for the RUU zip files to install but since my phone is not linked with any operator, i have no clue which link to use.
my friend suggested me a link which was
RUU_M7_UL_JB_50_HTC_Europe_1.20.401.1_Radio_4A.13.3227.06_10.27.1127.01_release_308001_signed_2_4
when i try to install the zip using the following commands
fastboot oem lock
fastboot oem rebootRUU
fastboot flash zip RUU_M7_UL_JB_50_HTC_Europe_1.20.401.1_Radio_4A.13.3227.06_10.27.1127.01_release_308001_signed_2_4.zip
i received following error
sending 'zip' (1010948 KB)...
OKAY [ 46.936s]
writing 'zip'...
(bootloader) signature checking
FAILED (remote: 12 signature ve
finished. total time: 133.252s
I have been trying all different ways but so far no solution.
could any one help me get back to my Android please
if my question is not clear or need any explanation please dont hesitate
Thank you in Advance
aamalraj said:
Hi ,
i have a HTC ONE mobile phone, few days before i tried to install cyangonMod but unfortunately due to faulty USB my installation broke up.
so i ended up with no OS installed on my HTC ONE. later i searched out the forum and rooted back to the ROM as it was.
i founded links for the RUU zip files to install but since my phone is not linked with any operator, i have no clue which link to use.
my friend suggested me a link which was
RUU_M7_UL_JB_50_HTC_Europe_1.20.401.1_Radio_4A.13.3227.06_10.27.1127.01_release_308001_signed_2_4
when i try to install the zip using the following commands
fastboot oem lock
fastboot oem rebootRUU
fastboot flash zip RUU_M7_UL_JB_50_HTC_Europe_1.20.401.1_Radio_4A.13.3227.06_10.27.1127.01_release_308001_signed_2_4.zip
i received following error
sending 'zip' (1010948 KB)...
OKAY [ 46.936s]
writing 'zip'...
(bootloader) signature checking
FAILED (remote: 12 signature ve
finished. total time: 133.252s
I have been trying all different ways but so far no solution.
could any one help me get back to my Android please
if my question is not clear or need any explanation please dont hesitate
Thank you in Advance
Click to expand...
Click to collapse
post the output of ''fastboot getvar all' minus imei/sn, otherwise we can't help
output of ''fastboot getvar all'
alray said:
post the output of ''fastboot getvar all' minus imei/sn, otherwise we can't help
Click to expand...
Click to collapse
D:\HTCOneRoot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__203
(bootloader) battery-status: good
(bootloader) battery-voltage: 4325mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.121s
aamalraj said:
D:\HTCOneRoot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__203
(bootloader) battery-status: good
(bootloader) battery-voltage: 4325mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.121s
Click to expand...
Click to collapse
You need this RUU, and because its a downgrade, you will need to s-off first and then flash hboot 1.44. After your phone will be back to stock 1.28.401.7 and you will receive ota to latest version. Follow this procedure and don't forget to thanks the OP for his awesome guide :good:.
The other option if you don't want/can't s-off is to use this rom (guru reset). this is the stock rom for your version, and you will be able to update ota after. Instructions for guru reset can be found here
Still not working
alray said:
You need this RUU, and because its a downgrade, you will need to s-off first and then flash hboot 1.44. After your phone will be back to stock 1.28.401.7 and you will receive ota to latest version. Follow this procedure and don't forget to thanks the OP for his awesome guide :good:.
The other option if you don't want/can't s-off is to use this rom (guru reset). this is the stock rom for your version, and you will be able to update ota after. Instructions for guru reset can be found here
Click to expand...
Click to collapse
The first solution didnt work cause since i have no OS in my HTC so adb functions are not working, since adb functions are not working so i cant do an s-off
The second solution: i dont know how to get the zip file inside my phone cause i cant execute adb sideload, is there anyother way to trasfer the file to the phone or is there any other way of executing it guru reset.
aamalraj said:
The first solution didnt work cause since i have no OS in my HTC so adb functions are not working, since adb functions are not working so i cant do an s-off.
The second solution: i dont know how to get the zip file inside my phone cause i cant execute adb sideload, is there anyother way to trasfer the file to the phone or is there any other way of executing it guru reset.
Click to expand...
Click to collapse
Boot your phone in TWRP recovery, dont select any option, just let the phone boot in twrp main menu
then:
Code:
adb push name_of_guru_reset_file.zip /sdcard/
then in twrp select install, chose the .zip and follow instruction in aroma installer.
alray said:
You need this RUU, and because its a downgrade, you will need to s-off first and then flash hboot 1.44. After your phone will be back to stock 1.28.401.7 and you will receive ota to latest version. Follow this procedure and don't forget to thanks the OP for his awesome guide :good:.
The other option if you don't want/can't s-off is to use this rom (guru reset). this is the stock rom for your version, and you will be able to update ota after. Instructions for guru reset can be found here
Click to expand...
Click to collapse
Thank you very much i got my OS back,
aamalraj said:
Thank you very much i got my OS back,
Click to expand...
Click to collapse
Glad for you :highfive:

[Q] Need to return to stock but confused

Hi folks,
I need to return my phone for a repair however i've rooted and added a custom ROM. After reading several guides both on here and via other sites im not sure if there is actually an RUU.zip file suitable for my versions/device. I have included debug information below
Recovery: TWRP
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3777mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.065s
My carrier is 3 (Hutchinson 3G). Ideally I'd like to be able to return it to stock but also still receive OTA updates.
Thanks in advance
Sam
CreativeNerdSam said:
Hi folks,
I need to return my phone for a repair however i've rooted and added a custom ROM. After reading several guides both on here and via other sites im not sure if there is actually an RUU.zip file suitable for my versions/device. I have included debug information below
Recovery: TWRP
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3777mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.065s
My carrier is 3 (Hutchinson 3G). Ideally I'd like to be able to return it to stock but also still receive OTA updates.
Thanks in advance
Sam
Click to expand...
Click to collapse
Your already s-off so it's gonna be fairly simple to return to stock. There is no ruu for h3g be live me I know.
See this guide. http://forum.xda-developers.com/showthread.php?p=47794219
The files linked below may come in handy in place of a stock nandroid. But consult with the guide author first so to avoid any problems
Download 2.24.771.3 Stock reset. Flashes with custom recovery.
http://www.htc1guru.com/dld/guru_reset_m7_2-24-771-3-zip/
Download 2.24.771.3.zip firmware here
http://xda7.androidrevolution.org/db_mirror/Firmware/index.php?dir=HTC/HTC_One/771/
CreativeNerdSam said:
Hi folks,
I need to return my phone for a repair however i've rooted and added a custom ROM. After reading several guides both on here and via other sites im not sure if there is actually an RUU.zip file suitable for my versions/device. I have included debug information below
Recovery: TWRP
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3777mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.065s
My carrier is 3 (Hutchinson 3G). Ideally I'd like to be able to return it to stock but also still receive OTA updates.
Thanks in advance
Sam
Click to expand...
Click to collapse
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk
Hi Danny,
Will I have to flash the firmware also? I wasn't aware i'd actually updated it - IM currently running the Revolution 70 ROM
Regards
Sam
Pls help me too
I am stuck at bootscreen with HTC logo
here is my getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.52.703.105
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 3739mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
Please guide
CreativeNerdSam said:
Hi Danny,
Will I have to flash the firmware also? I wasn't aware i'd actually updated it - IM currently running the Revolution 70 ROM
Regards
Sam
Click to expand...
Click to collapse
Your currently running HTC WWE as identified 3.62.401. firmware you will need to change back to H3G firmware to return to stock. On top of that you first need to run a complete stock ruu to guarantee all partitions are back to stock plus some of the procedure requires you to be on the lowest hboot 1.44. Just installing the reset.zip and firmware is not enough
Please bare with me I have made contact with the author of the original guide, and confirm my guru reset method will work. I will post a step by step to return your device to stock using the files I already linked.
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk
Use this guide at your own risk I will except no responsibility if you brick your device using this guide or any of the files linked in it. Always check Md5 values of files you have downloaded before flashing them to your device. This Guide and the files contained in it are intended for returning to stock on a H3G Branded M7_ul only. S-OFF is required to complete this procedure. For all other types of M7_ul Please see @nkk71 guide here [GUIDE] [02-MAR-2014] nkk71's SuperGUIDE to returning 100% back to stock
Return to 100% Stock For H3G UK M7_ul
Download and prepare all files
Download this: https://www.androidfilehost.com/?fid=23329332407584993 <<<Rename this to ruu.zip
Download this: https://www.dropbox.com/s/82kt3edku0j2sup/cwm.img?dl=0 <<<Leave this as cwm.img
Download 2.24.771.3 Stock reset. Flashes with custom recovery.
http://www.htc1guru.com/dld/guru_reset_m7_2-24-771-3-zip/ <<<Rename this to reset.zip
Download 2.24.771.3.zip firmware here
https://www.dropbox.com/s/9t5ifymw16kjljq/2.24.771.3.zip?dl=0 <<<Rename this to firmware.zip
Put all these renamed files into your adb/fastboot folder.
Step 1: go back to Sense 5 Stock
You already have correct cid HTC__001 for the RUU so well use it to return to complete WWE Stock Software
Boot your phone to the bootloader and connect fastbootusb, Now in the fastboot command line type
Code:
fastboot oem rebootRUU
case sensitive^^^^^^
Your phone will reboot to a black screen with silver HTC logo. This is ruu mode we can now flash the RUU.
Code:
fastboot flash zip ruu.zip
The first flash is just a pre-update. The screen will go off and then return to ruu mode. Flash the zip again immediately.
Code:
fastboot flash zip ruu.zip
The second flash will flash the full ruu, the progress bar on the screen will not reach 100% this is normal as long as the command line has finished it's output it's done.
Code:
fastboot reboot-bootloader
This will completely return you to 100% stock Sense 5, but European unbranded version
Step 2: Reset CID to H3G__001 <--- "__" = 2x Underscores
Code:
fastboot oem writecid H3G__001
fastboot reboot-bootloader
-> and confirm CID is back to H3G__001
Step 3: restore H3G Stock Rom + Recovery
To install the reset.zip we need a custom recovery, we dont want to flash a custom recovery so we can just boot one temporerily. This is only possible now we have hboot 1.44.
Code:
fastboot boot cwm.img
you should now be in CWM recovery; verify adb is working, by using:
Code:
adb devices
it should show an output of your device serial number followed by "recovery"
Push the reset.zip with adb
Code:
adb push reset.zip /sdcard
The push will take several minutes and the command window will seem unresponsive until the push completes. Once the push is done install the reset.zip using the clockworkmod recovery menu. In the aroma installer you will be presented with some options.
Stock recovery <<<<Yes
Stock Radio <<<<Yes
Root <<<<No
Once the install is complete
Code:
adb reboot bootloader
Step 4: Remove TAMPERED (if it's there) and set bootloader to LOCKED (not relocked)
In bootloader/FASTBOOT USB, boot to CWM recovery:
Code:
fastboot boot cwm.img
you should now be in CWM recovery; verify adb is working, by using:
Code:
adb devices
Code:
adb shell
Reset Tampered – Strongly Recommend you Copy and Paste this command
Code:
echo -ne '\x00' | dd of=/dev/block/mmcblk0p7 bs=1 seek=4265988
Reset Locked – Strongly Recommend you Copy and Paste this command
Code:
echo -ne '\x00\x00\x00\x00' | dd of=/dev/block/mmcblk0p3 bs=1 seek=33796
Code:
exit
Since you're still in CWM, go ahead and:
-> "wipe cache"
-> "advanced" -> "wipe dalvik"
then
Code:
adb reboot bootloader
and confirm no TAMPERED and LOCKED status
Step 6: Restore Official H3G Firmware
Boot your phone to the bootloader and connect fastbootusb, Now in the fastboot command line type
Code:
fastboot oem rebootRUU
case sensitive
Your phone will reboot to a black screen with silver HTC logo. This is ruu mode we can now flash the firmware.
Code:
fastboot flash zip firmware.zip
The first flash is just a pre-update. The screen will go off and then return to ruu mode. Flash the zip again immediately.
Code:
fastboot flash zip firmware.zip
The second flash will flash the firmware, the progress bar on the screen will not reach 100% this is normal as long as the command line has finished it's output it's done.
Code:
fastboot reboot-bootloader
Now reboot the phone from the bootloader menu Setup the basics but DO NOT except any ota updates at this point. If your returning for warranty you need to set the phone back to s-on this must be done before you update to hboot 1.55 or you risk Tampered flag returning.
Step 7: do a factory reset and return to s-on
Go to Settings -> Backup & reset -> Reset phone (at the bottom select Erase all date) -> OK
Once thats complete reboot the phone to the bootloader connect fastboot usb then
Code:
fastboot oem writesecureflag 3
reboot 3 times and make sure it doesnt say "tamper detected - rebooting" and then shows TAMPERED again
That's it you can reboot the phone and install any remaining ota updates if you want. But you are now ready to return the device for repair
Hi Danny,
Thank you very much for this guide and many apologies for the late response - I've only just seen your reply.
That said I've just checked the links you posted and unfortunately the Dropbox links are no longer available - is there any chance you could re-upload them or provide an alternative link?
Thanks
CreativeNerdSam said:
Hi Danny,
Thank you very much for this guide and many apologies for the late response - I've only just seen your reply.
That said I've just checked the links you posted and unfortunately the Dropbox links are no longer available - is there any chance you could re-upload them or provide an alternative link?
Thanks
Click to expand...
Click to collapse
Links are all updated, you should be good to go
CreativeNerdSam said:
Hi Danny,
Will I have to flash the firmware also? I wasn't aware i'd actually updated it - IM currently running the Revolution 70 ROM
Regards
Sam
Click to expand...
Click to collapse
Wouldn't you remember if you ran a WWE RUU or flashed firmware and changed CID? Because yes, your fastboot getvar all results point to it not being a 3 phone. Did you buy the phone from 3, or are just using a 3 SIM card?
(just thought I'd ask the questions before you change your phone... Although going back to WWE is way easier than going to 3)
deeevan said:
Wouldn't you remember if you ran a WWE RUU or flashed firmware and changed CID? Because yes, your fastboot getvar all results point to it not being a 3 phone. Did you buy the phone from 3, or are just using a 3 SIM card?
(just thought I'd ask the questions before you change your phone... Although going back to WWE is way easier than going to 3)
Click to expand...
Click to collapse
Hi Deevan,
Im glad you've pointed that out. In my pure ignorance and stupidity I totally forgot that I had actually got an insurance replacement of which was a refurbished device which is unlocked.
Where does this leave me in terms of going back to stock?
CreativeNerdSam said:
Hi Deevan,
Im glad you've pointed that out. In my pure ignorance and stupidity I totally forgot that I had actually got an insurance replacement of which was a refurbished device which is unlocked.
Where does this leave me in terms of going back to stock?
Click to expand...
Click to collapse
We'll if it's not the original device supplied to you by H3G there's little point switching it to a H3G branded hand set.
You should the the ruu.exe guide in nkk71's guide linked at the top of mine. What reason exactly are you returning the device to stock?
CreativeNerdSam said:
Where does this leave me in terms of going back to stock?
Click to expand...
Click to collapse
Code:
(bootloader) version-main: 3.62.[B]401[/B].1
(bootloader) cidnum: [B]HTC__001[/B]
These are the important bits to remember about your phone. Look for RUUs for HTC__001 and x.x.401.x. The HTC__001 RUU is the basis of nkk71's guide to going back to stock. Because that IS your phone, you don't need to go through the extra steps of changing CID back to your original one, restoring a backup etc etc. The RUU will make your phone a factory fresh HTC__001.
Danny201281 said:
We'll if it's not the original device supplied to you by H3G there's little point switching it to a H3G branded hand set.
You should the the ruu.exe guide in nkk71's guide linked at the top of mine. What reason exactly are you returning the device to stock?
Click to expand...
Click to collapse
That's exactly what I thought now that i've actually seen sense. I do however need to return my phone as I have a charging port issue so I just need to go back to stock forgetting everything I mentioned about H3G.
thanks
CreativeNerdSam said:
That's exactly what I thought now that i've actually seen sense. I do however need to return my phone as I have a charging port issue so I just need to go back to stock forgetting everything I mentioned about H3G.
thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=47794190
Just need this then Post #3

[Q] Trying to get S-OFF, HBOOT 1.54 (mainver is empty for some reason)

so I'm trying to flash the new Venom 8.0.0 but to do that I gotta update the firmware but I can't see what firmware I have since fastboot getvar mainver gives the following results:
"mainver:
finished. total time: 0.000s"
Anyone know whats wrong?
Thanks.
Rogueaholic said:
so I'm trying to flash the new Venom 8.0.0 but to do that I gotta update the firmware but I can't see what firmware I have since fastboot getvar mainver gives the following results:
"mainver:
finished. total time: 0.000s"
Anyone know whats wrong?
Thanks.
Click to expand...
Click to collapse
its an issue with flashing a custom recovery, post your fastboot getvar all please without imei and serial number and we can probably tell you what you version main is.
Rogueaholic said:
so I'm trying to flash the new Venom 8.0.0 but to do that I gotta update the firmware but I can't see what firmware I have since fastboot getvar mainver gives the following results:
"mainver:
finished. total time: 0.000s"
Anyone know whats wrong?
Thanks.
Click to expand...
Click to collapse
yeah twrp had a bug that hides the mainver... I can tell you first hand if your on hboot 1.54 your software version is 2.x or 3.x at the highest
and the lollipop roms are not going to work until you update the firmware (7.x)
Flash an old Stock Rom like this >> https://www.androidfilehost.com/?w=files&flid=22071
and use Rumrunner to get s-off
clsA said:
yeah twrp had a bug that hides the mainver... I can tell you first hand if your on hboot 1.54 your software version is 2.x or 3.x at the highest
and the lollipop roms are not going to work until you update the firmware (7.x)
Flash an old Stock Rom like this >> https://www.androidfilehost.com/?w=files&flid=22071
and use Rumrunner to get s-off
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: xxxxx
(bootloader) imei: xxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3835mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.065s
I have 4.4.3 venom rom atm if that changes anything
Rogueaholic said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: xxxxx
(bootloader) imei: xxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3835mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.065s
I have 4.4.3 venom rom atm if that changes anything
Click to expand...
Click to collapse
your phone is already s-off, you can flash any RUU you like, then update to the latest, then flash a custom recovery and then flash Venom rom if thats what you want.
Seanie280672 said:
your phone is already s-off, you can flash any RUU you like.
Click to expand...
Click to collapse
Yeah I just got that one done but whenever I type
fastboot oem rebootRUU
and then fastboot flash zip 6.09.401.5-FULL_STOCK_WIPE.zip
it just says "<waiting for device>" waited for 30 minutes and nothing happened :s rebooted 5 times and tried same process every time.
Thanks for the quick responses!
EDIT: fastboot oem rebootRUU works but the fastboot flash zip doesn't.
Rogueaholic said:
Yeah I just got that one done but whenever I type
fastboot oem rebootRUU
and then fastboot flash zip 6.09.401.5-FULL_STOCK_WIPE.zip
it just says "<waiting for device>" waited for 30 minutes and nothing happened :s rebooted 5 times and tried same process every time.
Thanks for the quick responses!
EDIT: fastboot oem rebootRUU works but the fastboot flash zip doesn't.
Click to expand...
Click to collapse
when you get to RUU mode, check your computer see's the phone in device manager, waiting for device is a driver problem.
and just flash straight to 7.19.401.2, follow the instructions here: http://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944 download much further down the page, make sure you get the right one, 3rd one up from the bottom.
Seanie280672 said:
when you get to RUU mode, check your computer see's the phone in device manager, waiting for device is a driver problem.
and just flash straight to 7.19.401.2, follow the instructions here: http://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944 download much further down the page, make sure you get the right one, 3rd one up from the bottom.
Click to expand...
Click to collapse
Well around 10 minutes ago it randomly worked.. But you think if I flash 7.19.401.2 I could get the venom 8.0 ROM up and running?
Sorry for the stupid questions :d
EDIT: I'm retarded, sorry. Found the answer: yes
ViperOne 8.0.0 (March 8)
Re-based on 7.19.401.2
Thanks so much!
Rogueaholic said:
Well around 10 minutes ago it randomly worked.. But you think if I flash 7.19.401.2 I could get the venom 8.0 ROM up and running?
Sorry for the stupid questions :d
Click to expand...
Click to collapse
not stupid, better to ask, are you after stock rom at all or just want to get your firmware up to speed ?
if you dont want stock rom at all, then no point flashing that file, just flash the firmware for it from here: https://www.androidfilehost.com/?fid=95916177934534374
then flash twrp 2.8.5.0 recovery, copy viper to the internal storage and flash it.

M7 Sprint m7_wls - firmware/update issue

I'm having some issues with getting the firmware updated on my m7 and hoping someone can help.
I had posted some info in another thread of mine, but the thread is now over a year old so I figured I would start a new one.
First, here is my get-var output
C:\DroidTools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 1.00.20.0626
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.31.651.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 99000146505640
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4001mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.094s
Not sure why the get-var didn't finish out (Too many links) ?
Anyways I tried updating the firmware with the latest I could find for the sprint variant, but I received this error.
"Target didn't report max-download-size"
sending 'zip' (45578 KB)...
OKAY [2.807s]
writing 'zip' . . .
(bootloader) zip header checking . . .
(bootloader) zip info parsing . . .
FAILED (remote: 99 unknown fail)
finished. total tim: 3.067s
I've tried a few different versions of firmware as well and still no luck.
I can just fastboot reboot bootloader and then reboot after that and I'm back to my normal stuff with no issues though.
I was also able to flash a newer twrp recovery without any hiccups.. so not sure what is up.
I am currently running AICP 12.1 but I am getting allot of crashes on random thing, and I suspect my mega-old firmware may be contributing. I also tried the last CyanogenMod that was available (13...?) but I couldn't get data and calls to work.
I also attempted to re-lock the boot-loader and tried flashing the firmware that way, but I received a different error.
"remote 12 signature verify fail"
After that I had to scramble and remember how to unlock the boot-loader again just to get my phone to boot back up lol. I haven't had my unlock file in years so that was fun.
So I'm stuck at 1.44.0000 for now. I'm starting to wonder if i have to find an older firmware first before I can jump to a newer one?
Also slightly confused on the RUU. I am already running custom recovery and custom ROM. Is updating the RUU still necessary?
All feedback and help is welcomed.
Thanks
cloud66 said:
I'm having some issues with getting the firmware updated on my m7 and hoping someone can help.
I had posted some info in another thread of mine, but the thread is now over a year old so I figured I would start a new one.
First, here is my get-var output
C:\DroidTools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 1.00.20.0626
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.31.651.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 99000146505640
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4001mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.094s
Not sure why the get-var didn't finish out (Too many links) ?
Anyways I tried updating the firmware with the latest I could find for the sprint variant, but I received this error.
"Target didn't report max-download-size"
sending 'zip' (45578 KB)...
OKAY [2.807s]
writing 'zip' . . .
(bootloader) zip header checking . . .
(bootloader) zip info parsing . . .
FAILED (remote: 99 unknown fail)
finished. total tim: 3.067s
I've tried a few different versions of firmware as well and still no luck.
I can just fastboot reboot bootloader and then reboot after that and I'm back to my normal stuff with no issues though.
I was also able to flash a newer twrp recovery without any hiccups.. so not sure what is up.
I am currently running AICP 12.1 but I am getting allot of crashes on random thing, and I suspect my mega-old firmware may be contributing. I also tried the last CyanogenMod that was available (13...?) but I couldn't get data and calls to work.
I also attempted to re-lock the boot-loader and tried flashing the firmware that way, but I received a different error.
"remote 12 signature verify fail"
After that I had to scramble and remember how to unlock the boot-loader again just to get my phone to boot back up lol. I haven't had my unlock file in years so that was fun.
So I'm stuck at 1.44.0000 for now. I'm starting to wonder if i have to find an older firmware first before I can jump to a newer one?
Also slightly confused on the RUU. I am already running custom recovery and custom ROM. Is updating the RUU still necessary?
All feedback and help is welcomed.
Thanks
Click to expand...
Click to collapse
The firmware.zip you are trying to flash (the one linked in the other thread) isn't signed so your phone must be s-off. Sorry I should have mentioned that earlier but didn't noticed yours was s-on.
Its actually s-off now, showing "shipped s-on"?
Not sure what that means but the bootloader is definitely unlocked.
cloud66 said:
Its actually s-off now, showing "shipped s-on"?
Not sure what that means but the bootloader is definitely unlocked.
Click to expand...
Click to collapse
bootloader unlocked doesn't mean s-off. If your phone is s-off you should see "PVT SHIP S-OFF" and "Security: OFF" in your fastboot getvar all output
On a S-ON phone you can only flash signed firmware.zip and it must be done with a locked (or re-locked) bootloader
On a S-OFF phone you can flash signed or unsigned firmware.zip and the bootloader status doesn't matters (can be locked, re-locked or unlocked).
The sprint firmware linked in the other thread, the one that you are trying to flash is an unsigned zip so you need s-off first. Otherwise you can try to update the whole phone using the latest sprint RUU from htc's website, not sure it will work on hboot 1.44. Backup important files before trying, the ruu will wipe and update your rom and firmware. Btw you also need to be locked/re-locked to flash a ruu if your phone is s-on.
alray said:
bootloader unlocked doesn't mean s-off. If your phone is s-off you should see "PVT SHIP S-OFF" and "Security: OFF" in your fastboot getvar all output
On a S-ON phone you can only flash signed firmware.zip and it must be done with a locked (or re-locked) bootloader
On a S-OFF phone you can flash signed or unsigned firmware.zip and the bootloader status doesn't matters (can be locked, re-locked or unlocked).
The sprint firmware linked in the other thread, the one that you are trying to flash is an unsigned zip so you need s-off first. Otherwise you can try to update the whole phone using the latest sprint RUU from htc's website, not sure it will work on hboot 1.44. Backup important files before trying, the ruu will wipe and update your rom and firmware. Btw you also need to be locked/re-locked to flash a ruu if your phone is s-on.
Click to expand...
Click to collapse
Can you help me with an M7 that has these details:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.60.0000
(bootloader) version-baseband: 1.01.20.1225
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: xxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxx
(bootloader) meid: xxxxxxxxxxxxx
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4305mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-91bb20e1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
The phone won't boot and the version-main is blank. First time I'm handling an M7 since this is a friends and the guides all involve toolkits so kinda lost at the moment. Bootloader is locked
Unlocked the bootloader only to find it has TWRP and no OS
Renosh said:
Can you help me with an M7 that has these details:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.60.0000
(bootloader) version-baseband: 1.01.20.1225
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: xxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxx
(bootloader) meid: xxxxxxxxxxxxx
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4305mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-91bb20e1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
The phone won't boot and the version-main is blank. First time I'm handling an M7 since this is a friends and the guides all involve toolkits so kinda lost at the moment. Bootloader is locked
Unlocked the bootloader only to find it has TWRP and no OS
Click to expand...
Click to collapse
You can flash it back to stock rom using a RUU.
The latest version is here: http://dl3.htc.com/application/RUU_...691.655435036.1511537283-936972463.1506975706
Launch the .exe file with the phone in bootloader mode and showing "fastboot usb" in red
If you are not using a Windows PC you can find the .zip version of the same RUU here: https://androidfilehost.com/?fid=24588232905725176
You can flash it using fastboot in ruu mode:
Code:
htc_fastboot oem rebootRUU
htc_fastboot flash zip PN071IMG_M7WLS_L50_SENSE60_SPRINT_6.23.651.10_signed.zip
htc_fastboot reboot
If you prefer to flash a custom rom instead of stock, just make sure to choose one compatible with the Sprint variant (M7WLS). Push it to your phone memory and flash it using the "install" menu from twrp.
If the phone was sim-unlocked (working on other network than Sprint) you might have to sim-unlock again after flashing a RUU.
alray said:
You can flash it back to stock rom using a RUU.
The latest version is here: http://dl3.htc.com/application/RUU_...691.655435036.1511537283-936972463.1506975706
Launch the .exe file with the phone in bootloader mode and showing "fastboot usb" in red
If you are not using a Windows PC you can find the .zip version of the same RUU here: https://androidfilehost.com/?fid=24588232905725176
You can flash it using fastboot in ruu mode:
Code:
htc_fastboot oem rebootRUU
htc_fastboot flash zip PN071IMG_M7WLS_L50_SENSE60_SPRINT_6.23.651.10_signed.zip
htc_fastboot reboot
If you prefer to flash a custom rom instead of stock, just make sure to choose one compatible with the Sprint variant (M7WLS). Push it to your phone memory and flash it using the "install" menu from twrp.
If the phone was sim-unlocked (working on other network than Sprint) you might have to sim-unlock again after flashing a RUU.
Click to expand...
Click to collapse
Thanks I actually already managed to fix it using this thread:
https://forum.xda-developers.com/showthread.php?t=2795856
I used the full firmware but had to install this redistributable file for RUU to work (Windows 10) after locking bootloader:
https://npackd.appspot.com/p/com.microsoft.VisualCPPRedistributable/9.0.21022.8
I'll have to search for sim unlock, crap
alray said:
bootloader unlocked doesn't mean s-off. If your phone is s-off you should see "PVT SHIP S-OFF" and "Security: OFF" in your fastboot getvar all output
On a S-ON phone you can only flash signed firmware.zip and it must be done with a locked (or re-locked) bootloader
On a S-OFF phone you can flash signed or unsigned firmware.zip and the bootloader status doesn't matters (can be locked, re-locked or unlocked).
The sprint firmware linked in the other thread, the one that you are trying to flash is an unsigned zip so you need s-off first. Otherwise you can try to update the whole phone using the latest sprint RUU from htc's website, not sure it will work on hboot 1.44. Backup important files before trying, the ruu will wipe and update your rom and firmware. Btw you also need to be locked/re-locked to flash a ruu if your phone is s-on.
Click to expand...
Click to collapse
Thanks for the info. I'm going to try this sometime this week hopefully.
I've been running AICP 7.1.1 for nearly 3 weeks so far with minor hiccups now and then so i'm slightly hesitant to screw something up again :-/
I will update this as soon as I try a signed RUU from HTC.
Will a signed RUU destroy my recovery as well?
Also do I need to unlock after I flash the RUU?
Steps would be
1. relock bootloader
2. Install signed RUU
3. Relock Bootloader
4. Install TWRP
5. Install Rom
6. ?
Assuming I have these correct and everything works that is.
cloud66 said:
Thanks for the info. I'm going to try this sometime this week hopefully.
I've been running AICP 7.1.1 for nearly 3 weeks so far with minor hiccups now and then so i'm slightly hesitant to screw something up again :-/
I will update this as soon as I try a signed RUU from HTC.
Will a signed RUU destroy my recovery as well?
Also do I need to unlock after I flash the RUU?
Steps would be
1. relock bootloader
2. Install signed RUU
3. Re-unlock Bootloader (use www.htcdev.com/bootloader)
4. Install TWRP
5. Install Rom
6. ?
Assuming I have these correct and everything works that is.
Click to expand...
Click to collapse
Stock recovery will overwrite twrp when flashing a RUU, not really a concern since it will take only a few minutes to reflash twrp. And yes you'll need to re-unlock the bootloader after flashing the ruu, before you can install twrp back to your recovery partition. Steps 1 to 5 above are correct.

Categories

Resources