recovery & reboot problem - G 2014 Q&A, Help & Troubleshooting

in my moto g 2nd gen the moto logo appears again and again and bootloader doesn't last long to perform recovery option & because of that i am not able to switch it on & because of that my lap was not able to detect my device ,is there any method to make my phone back to normal?
need quick reply. plz help me !!!!!!

Hi,
It sounds to me like a stuck power button. But for other opinions, I will have your thread moved to your device section. You will need to register on XDA to respond to any replies.
Good luck!

Related

[Q] 3 button combo not working after manually removing carrier splash screen

hi everyone,im a new user of this device so forgive me for my stupidness, ok this started when i saw a guide somewhere in this forum that says enter some codes followed by the time and minutes and then select XSP and click install to remove the operator splash screen(i'm a malaysian but my SGS has the neighbouring singapore splash screen so after doing what it says my phone automatically reboot and i lose all phone data so finally the original galaxy s boot and turn off screen appears but recently i tried to install the voodoo lag fix only to realize that that the 3 button combo either for recovery and hard reset mode is not functioning anymore so guys i really need help here....i know some of you might say go read up the guide to enable 3 button combo,i had read it and do what it says but there was a problem at command prompt screen..it always say invalid command,any help or advice is really appreciated
-regards
just flash back a working ROM
or you can just flash the 3 button SPL on the Dev section.
link on the SGS wiki pages

[Q] Moto X soft brick - Need help!!

Hey guys,
I just got my Moto X and I was trying to factory reset my phone when I accidentally wiped my entire internal sd and the system. I lost the back up that I made earlier before wiping the device and I have no idea how to fix my device.
At the moment, whenever I boot the phone, all I can see is the image in the attachment below.
I cant connect to my usb therefore I cant put anything in my phone.
I tried using adb sideload in TWRP but it doesnt want to load.
I tried searching the threads of other people in xda who has bricked their phone but found no solution.
I really need help to revive the device to it's original condition.
Please help. :crying:
Merge
bqw371 said:
Merge
Click to expand...
Click to collapse
What do I merge?
1. Download correct sbf file for your phone from the following link.
http://sbf.droid-developers.org/phone.php?device=0
2. Download RSDLite (Google it)
3. Install USB driver for Motorola on your computer
4. Power Off your phone. Press Volume Down + Power button for 3 seconds. You will see boot loader screen
5. Flash your download file from step 1 with RSDLite.
6. Reboot when it is done.
Good Luck
Sent from my XT1053 using xda app-developers app
Solved
realdaniel1989 said:
Hey guys,
I just got my Moto X and I was trying to factory reset my phone when I accidentally wiped my entire internal sd and the system. I lost the back up that I made earlier before wiping the device and I have no idea how to fix my device.
At the moment, whenever I boot the phone, all I can see is the image in the attachment below.
I cant connect to my usb therefore I cant put anything in my phone.
I tried using adb sideload in TWRP but it doesnt want to load.
I tried searching the threads of other people in xda who has bricked their phone but found no solution.
I really need help to revive the device to it's original condition.
Please help. :crying:
Click to expand...
Click to collapse
Managed to solve the problem.
For the non connecting adb sideload install this -
http://www.androidpolice.com/2013/0...-driver-for-windows-that-actually-works-on-8/
And in order to return to stock or whatever rom then -
http://forum.xda-developers.com/moto-x/general/guide-moto-x-return-to-100-stock-using-t2446515
Just jumping on saying that I had nearly the same problem in the last few days. and RSD fixed it. I lost my root (I was on 4.4., and flashed 4.4) but apart from that all is good.
emailrob said:
Just jumping on saying that I had nearly the same problem in the last few days. and RSD fixed it. I lost my root (I was on 4.4., and flashed 4.4) but apart from that all is good.
Click to expand...
Click to collapse
If your still on 4.4 just follow the slapmymoto thread. Write protection should still be off.
MOTO X
[email protected] said:
If your still on 4.4 just follow the slapmymoto thread. Write protection should still be off.
MOTO X
Click to expand...
Click to collapse
OK thank you. It seemed very convoluted (i.e. I had the chance of screwing up!)
Same problem
realdaniel1989 said:
Managed to solve the problem.
For the non connecting adb sideload install this -
http://www.androidpolice.com/2013/0...-driver-for-windows-that-actually-works-on-8/
And in order to return to stock or whatever rom then -
http://forum.xda-developers.com/moto-x/general/guide-moto-x-return-to-100-stock-using-t2446515
Click to expand...
Click to collapse
hi,
I have the same problemm stuck on the warning screen. I have the correct firmware and the latestd drivers but still no luck.
Can you please elaborate what have you done?
FIxed Solution to Moto X soft brick issue ( SD card Wiped ).
Finally got solution for this soft brick issue.
I had same problem. I accedently wiped my whole sdcard while wiping through twrp.
lost all the files, backup n all. noting to restore !
The only thing left was TWRP on my screen.
N if i tried to reboot, it said "are you sure ? No OS installed" kind of thing. Because there wasnt !
After pulling out an all n8er reading all related posts & threads on XDA, finally i was able return to my stock firmware moto X xt1052 India (AsiaRetail) by following method. (Method applied for all moto X variants provided stock firmware is available)
Thanks to all the bros in this XDA thread
* [GUIDE][VIDEO] Moto X - Return to 100% stock (using RSD Lite OR manual flash)
*ZEDOMAX on youtube.
1.I think in the case of all sd wipe, only flashing any ROM will not work.
But anyway if you havent washed white & still stuck,
go on youtube & search for ZEDOMAX-How to Copy Files Over to your Android In a Bootloop with No OS using ADB!
you will get the video & right instructions. Very helpful.
2 Now if you are all wiped like me, Dont panic ! There is an option of flashing a stock firmware on your device.
Go to this XDA thread
[GUIDE][VIDEO] Moto X - Return to 100% stock (using RSD Lite OR manual flash)
RSD lite worked pretty good for me.
++NOTE++
1. If you are in TWRP recovery & trying to connect to RSD lite, it wont show your device.
Push power + vol up + vol down altogether for about 10 sec & let'em go.(It might stuck on BTLDR UNLKD screen, dont worry, do it again) &
You will enter in fastboot menu. RSD lite will recognize your device Now when you plug USB cable to your PC (After Installing all the drivers suggested in video), you can follow that video from thread to flash stock fmwr. RSD will now work fine.
2. Moto X toolkit is gr8, but not for xt1052. Dont go there.
3. You will get most of the StockFirmwares here. Specially for 1052 bros. I bet you wont find'em this easily anywhere else. !
* www filefactory com/folder/dd05c058d3ff8dbe/?sort=created&order=DESC&show=25 *
(I am not allowed to post links yet ! place dot after www & b4 com )
XT1052_RETAIL-ASIA_4.4.4_KXA21.12-L1.26_18_cid7_CFC_1FF.xml_2
is the SF i installed. & it was same as my original one. 624MB.
GoodLuck bros.
I hope it helps to soft bricked bros ending up here. Hit Thanks if it works & of course let me know if there is anything else.
Keep Calm & Return to StackFrmwr.:angel:
TheDNY said:
Finally got solution for this soft brick issue.
I had same problem. I accedently wiped my whole sdcard while wiping through twrp.
lost all the files, backup n all. noting to restore !
The only thing left was TWRP on my screen.
N if i tried to reboot, it said "are you sure ? No OS installed" kind of thing. Because there wasnt !
After pulling out an all n8er reading all related posts & threads on XDA, finally i was able return to my stock firmware moto X xt1052 India (AsiaRetail) by following method. (Method applied for all moto X variants provided stock firmware is available)
Thanks to all the bros in this XDA thread
* [GUIDE][VIDEO] Moto X - Return to 100% stock (using RSD Lite OR manual flash)
*ZEDOMAX on youtube.
1.I think in the case of all sd wipe, only flashing any ROM will not work.
But anyway if you havent washed white & still stuck,
go on youtube & search for ZEDOMAX-How to Copy Files Over to your Android In a Bootloop with No OS using ADB!
you will get the video & right instructions. Very helpful.
2 Now if you are all wiped like me, Dont panic ! There is an option of flashing a stock firmware on your device.
Go to this XDA thread
[GUIDE][VIDEO] Moto X - Return to 100% stock (using RSD Lite OR manual flash)
RSD lite worked pretty good for me.
++NOTE++
1. If you are in TWRP recovery & trying to connect to RSD lite, it wont show your device.
Push power + vol up + vol down altogether for about 10 sec & let'em go.(It might stuck on BTLDR UNLKD screen, dont worry, do it again) &
You will enter in fastboot menu. RSD lite will recognize your device Now when you plug USB cable to your PC (After Installing all the drivers suggested in video), you can follow that video from thread to flash stock fmwr. RSD will now work fine.
2. Moto X toolkit is gr8, but not for xt1052. Dont go there.
3. You will get most of the StockFirmwares here. Specially for 1052 bros. I bet you wont find'em this easily anywhere else. !
* www filefactory com/folder/dd05c058d3ff8dbe/?sort=created&order=DESC&show=25 *
(I am not allowed to post links yet ! place dot after www & b4 com )
XT1052_RETAIL-ASIA_4.4.4_KXA21.12-L1.26_18_cid7_CFC_1FF.xml_2
is the SF i installed. & it was same as my original one. 624MB.
GoodLuck bros.
I hope it helps to soft bricked bros ending up here. Hit Thanks if it works & of course let me know if there is anything else.
Keep Calm & Return to StackFrmwr.:angel:
Click to expand...
Click to collapse
You could also learn to flash the stock image files manually via mfastboot. Then you won't need a tool.
You are right man.
Travisdroidx2 said:
You could also learn to flash the stock image files manually via mfastboot. Then you won't need a tool.
Click to expand...
Click to collapse
Yes of course Senior Member. I am looking forward to that.
Flashing mannually via mfastboot using commands was also an option.
But i am too newbie to do that . I rooted phone & was flashing rom for first time ! Thats why wiped sdcard.
And RSD lite method seemed too easy.
Thanks anyway. I'll learn mfastboot method too.
It will be helpful if you can give me some link where it is well explained. I checked out few threads but didnt get exactly which file is flashed where in those 16-17 commands.
TheDNY said:
Yes of course Senior Member. I am looking forward to that.
Flashing mannually via mfastboot using commands was also an option.
But i am too newbie to do that . I rooted phone & was flashing rom for first time ! Thats why wiped sdcard.
And RSD lite method seemed too easy.
Thanks anyway. I'll learn mfastboot method too.
It will be helpful if you can give me some link where it is well explained. I checked out few threads but didnt get exactly which file is flashed where in those 16-17 commands.
Click to expand...
Click to collapse
Dude, I am not trying to be a jerk. However, the info is all over on how to return to stock. All you need to do is a search. Here you go. http://forum.xda-developers.com/moto-x/general/ref-complete-moto-x-guides-information-t2603358 if you look in that one of many threads on how to return to stock you will get instructions and the commands you can copy and paste so you don't have to type them. YouTube also is a great help. Bet you could find great tutorials on there also for a visual. Now with those commands I would leave out the fastboot OEM lock unless you want to relock your boot loader. I hope this helps. But a simple search would of found you all this.
http://forum.xda-developers.com/moto-x/moto-x-qa/help-moto-x-bricked-how-to-unbrick-t2996791
Moto X Restore and unbrick for any major US carri…: http://youtu.be/jhhktIkwi7Q
How To Factory Restore Your Moto X Using Fastboot!: http://youtu.be/ZtRSrQrzIPI

[Q] Have I managed to HARD-BRICK my phone?

Switched from one provider to another, got a new phone which uses micro-sim, and couldnt get the p880 to read the new sim card, so I have been using the new phone, which is greatly inferior to the p880..
With the p880 just sitting around unused, i decided i might as well try to mod it, then get a regular sim card for it and start using it again. I think i killed it instead.
Before it died on me, I formatted / wiped / factory reset and then used the LG Mobile Support tool to upgrade to whatever the newest official release was.. 4.1.2??
At this point, here is what it can do:
1) When attempting to just turn it on and USE it as normal, it turns on, gets to the animated LG logo and stays there forever.
2) Power + Vol Down = OEM LG recovery menu
3) Power + Vol Up = Some kind of Restore graphic
4) Power + Vol Up and Down (AVX) = nothing
5) Plugged into USB with battery removed and holding Vol Down = home row LEDs light up, nothing else
Windows sees the phone as a "removable disk H:" when I plug it in, but the LG recovery software does not see it, and it also does not show up in the device manager..
At this point, all that I can seem to access is the "apply update from ADB" option to do an "adb sideload" command in recovery mode.. When I send over the root tool, the phone is happy. If I attempt to send anything else over via sideload, I always get kicked out of the process when it gets to the "verifying installation package" portion. I can wipe / factory reset to my heart's content, but I can get absolutely no further than this after attempting for about six hours yesterday.
Any hope for me or do i have a dope looking paperweight? Will providing you guys either the IMEI or S/N shed any light into a path to recovery?
Thanks for your time!
You have a booting rom, the device is not even close to hard brick. Is your bootloader unlocked? If yes you can flash a custom recovery with fastboot and install any rom you want.
Sent from my OmniROM-powered LG Optimus 4X HD
@one30six
Use this thread http://forum.xda-developers.com/showthread.php?t=2069723 or
Use this thread http://forum.xda-developers.com/showthread.php?t=2179126 to recover your phone.
Read the instructions with care and act as stated.
Good Luck.
sPEADy said:
@one30six
Use this thread http://forum.xda-developers.com/showthread.php?t=2069723 or
Use this thread http://forum.xda-developers.com/showthread.php?t=2179126 to recover your phone.
Read the instructions with care and act as stated.
Good Luck.
Click to expand...
Click to collapse
thank you, speady.. it turned out to be the first solution that you suggested, which i had seen before during my scouring of these forums.. but the real basis of my problem was that i had my phone plugged into the front-facing USB port of my computer rather than the one directly connected to the motherboard (on the back).. i guess the phone wasnt getting enough juice out of the front port to boot to S/W Update mode.. i am back to stock LG software and am eventually going to mod to another ROM
THANK YOU!

Stuck On Boot Screen Nokia

Hi Friends.. I updated my nokia X2 then rooted it,,, after thay i copied google play files,, and restart,, but now it is stuck on nokia logo,,, i tried to recover with nokia software recovery tool but it says phone no supported or cant read phone data... please help....what i do??
shahzadakram67 said:
Hi Friends.. I updated my nokia X2 then rooted it,,, after thay i copied google play files,, and restart,, but now it is stuck on nokia logo,,, i tried to recover with nokia software recovery tool but it says phone no supported or cant read phone data... please help....what i do??
Click to expand...
Click to collapse
hi shahzadakram67
did u fix your X2 boot loop issue.
if you are still facing boot loop, let me know i can help you.
Try this solution !
Try to download Nokia X2 tools using this thread:
http://forum.xda-developers.com/nokia-x2/general/tool-nokia-x2-tools-1-1-rus-en-rooting-t2846570
Connect your x2 via usb, run Nokia X2 tools and Enter Number 3 using the keyboard, then press enter.
this option removes google play and the services you added earlier, which is the main cause of the boot problem.
I hope it works.
Please tell me about the result.. Hope it works.
Good luck!
isnail said:
hi shahzadakram67
did u fix your X2 boot loop issue.
if you are still facing boot loop, let me know i can help you.
Click to expand...
Click to collapse
thnx brother i have fixed it...
shahzadakram67 said:
thnx brother i have fixed it...
Click to expand...
Click to collapse
pls tell me how u fix your problem. we have the same problem but i cant figure out how to fix this ****ing phone. please help
pepengmanok said:
pls tell me how u fix your problem. we have the same problem but i cant figure out how to fix this ****ing phone. please help
Click to expand...
Click to collapse
Bro u can use my method which is quite simple than using Nokia x tools
First go to recovery and wipe data and factory reset ur phone.....
Hit thanks button if I helped u...
Fingers crossed.: :
HOW TO REPAIR Nokia X2 dual sim Dead Boot
Bahaa_Hawk said:
Try to download Nokia X2 tools using this thread:
http://forum.xda-developers.com/nokia-x2/general/tool-nokia-x2-tools-1-1-rus-en-rooting-t2846570
Connect your x2 via usb, run Nokia X2 tools and Enter Number 3 using the keyboard, then press enter.
this option removes google play and the services you added earlier, which is the main cause of the boot problem.
I hope it works.
Please tell me about the result.. Hope it works.
Good luck!
Click to expand...
Click to collapse
1 month ago I bought X2 dual sim which is really new to market, unfortunately some days ago I try to start with difficulty its start but so much time stuck on Nokia logo and Nokia logo every time dim and shiny finally when its comes up it dose not know the Sim cards also the WiFi just turn off and turn on automatically and never fix it up also for Bluetooth and other else.
when I send to Nokia care they tell me its related to Boot and we don't have boot for this model,
please help me how I can fix it?
Solution to try
shahzadakram67 said:
Hi Friends.. I updated my nokia X2 then rooted it,,, after thay i copied google play files,, and restart,, but now it is stuck on nokia logo,,, i tried to recover with nokia software recovery tool but it says phone no supported or cant read phone data... please help....what i do??
Click to expand...
Click to collapse
You have almost bricked your phone but don't worry if you want to recover your phone you need infinity box or you have another option to visit nearest nokia store. they will make device work easily.
hope that helps you,
sagar.
I have the same problem bro
I too tried recovering through both the nokia software recovery tool and through the phones recovery mode but failed. The phone is stuck on boot screen after trying to install google play. Please help! BTW what is this infinity box and how can i use it to fix my phone?
shahzadakram67 said:
thnx brother i have fixed it...
Click to expand...
Click to collapse
can you please describe how did u fix it ?
I have the same problem , even after factory reset , phone doesn't come up
please help
solution for start up failure in Nokia xl
HI friends Itoo got same problem.
I sugest you to hard reset your mobile
to complete this process pls follow the steps given Below.
NOTE: THE DATA IN YOUR MOBILE MAY LOST SOME TIME.
Turn off handset and wait for 20 seconds
Press and hold Volume UP + Volume Down + Power key untill Recovery Menu Apprear
now select wipe data/factory reset and press power key to confirm
Now select Yes -- delete all user data and press power key to confirm
Now select wipe cache partition and press power key
now reboot device
how to use it?
and my nokia x2 ds cant open
i have the same problem,my Nokia x2 is stuck at nokia log....i need help please,,it failed to use even in hard reset...anyone there to help me please
i tried to flash cyanogen mod rom 13 on my nokia X2 RM1013 but did not back up my data,now my phone flashes the nokia logo and when i reboot with TWRP it says no OS installed.. what should i do to recover my phone. please anyone help me to either recover my software or to install CM13..... help plzzz
my nokia xl got stuck on nokia logo and bootup loop is going on and on.....formatting using key method not working anymore...anybody pls help me
helppppp
lenabharani said:
HI friends Itoo got same problem.
I sugest you to hard reset your mobile
to complete this process pls follow the steps given Below.
NOTE: THE DATA IN YOUR MOBILE MAY LOST SOME TIME.
Turn off handset and wait for 20 seconds
Press and hold Volume UP + Volume Down + Power key untill Recovery Menu Apprear
now select wipe data/factory reset and press power key to confirm
Now select Yes -- delete all user data and press power key to confirm
Now select wipe cache partition and press power key
now reboot device
Click to expand...
Click to collapse
hey i cant enter to recovery mode just restart and nokia Sh...iiitt logo and device not found on nokia x tools
how can i enable debugging mode when my x2 not booting
plz hlpppppp meeeee
Hi,
My Nokia X2 also stuck on boot screen. it appears only Nokia logo. i tried to install TWRP on the phone. and i tried above solutions, it doesn't work for me. please help.

[Q] Stable release (20141018) of CM11.0 by NovaFusion causes a hard brick on my phone

Hi guys,
First of all sorry for my English.
I have a big problem after upgrading (l always did it without any problem until now) to New stable release (20141018) of CM11.0 (by NovaFusion) for S3 Mini via TWRP. Everything gone well until I rebooted the phone (as the installer asked to). Now, my phone has a boot looping and the TWRP doesn’t boot either - just stuck on at “teamwin” logo (recovery's logo). It seems, my phone is dead and has a hard brick. The only thing what is working on it is offline charging. PC doesn't recognise my phone via USB.
Please help me - what can I do in this case? Or my phone is incorrigible and the only thing I can do is throw the phone into the trash?
Thank you for your help!
Best Regards,
Barni
fdfrs said:
Hi guys,
First of all sorry for my English.
I have a big problem after upgrading (l always did it without any problem until now) to New stable release (20141018) of CM11.0 (by NovaFusion) for S3 Mini via TWRP. Everything gone well until I rebooted the phone (as the installer asked to). Now, my phone has a boot looping and the TWRP doesn’t boot either - just stuck on at “teamwin” logo (recovery's logo). It seems, my phone is dead and has a hard brick. The only thing what is working on it is offline charging. PC doesn't recognise my phone via USB.
Please help me - what can I do in this case? Or my phone is incorrigible and the only thing I can do is throw the phone into the trash?
Thank you for your help!
Best Regards,
Barni
Click to expand...
Click to collapse
Follow these steps:
1-take out the battery of your phone and wait 20 seconds.
2-reinsert battery.
3-firstly hold volume down then home key and at the last press power button (while holding volume down and home)
you will see your phone gets into download mode then flash stock rom with odin go here for stock rom type your phone model and download www.sammobile.com
qasim799 said:
Follow these steps:
1-take out the battery of your phone and wait 20 seconds.
2-reinsert battery.
3-firstly hold volume down then home key and at the last press power button (while holding volume down and home)
you will see your phone gets into download mode then flash stock rom with odin go here for stock rom type your phone model and download...
Click to expand...
Click to collapse
Thank you for your quick reply. After I finished downloading the firmware from the site you linked me, I will try your steps. Thank you very much.
One more question: do I need anything else before flash the stock rom via odin? For example kernel, bootloader, etc...
Thanks.
Edit:
Dear Qasim799 ,
Thank you for your help - everything gone like a charm .
Thanks for your help to solve my problem .
I am grateful to you .
Regards,
Barni
fdfrs said:
Thank you for your quick reply. After I finished downloading the firmware from the site you linked me, I will try your steps. Thank you very much.
One more question: do I need anything else before flash the stock rom via odin? For example kernel, bootloader, etc...
Thanks.
Edit:
Dear Qasim799 ,
Thank you for your help - everything gone like a charm .
Thanks for your help to solve my problem .
I am grateful to you .
Regards,
Barni
Click to expand...
Click to collapse
Your welcome.Kindly press ? thanks button uder the posts.

Categories

Resources