Related
editi guess sdcard is incorrect/confusing for my situation, it's the entire system up to root folders is stuck in a read-only type state.
I didn't really see anything that fits my current problem (sorry if there is an answer somewhere buried in here)
So to start off with info, I installed Android on the TP back in February for my fiancée just for the basics of email, videoplayer, comic reader, internet browsing. Nothing too extravagant, just something with more to offer than webos.
I never did any updates on it because it worked perfectly fine for what it was being used on.
I've changed out the video selection many times as she watches through the shows with no problems.
Now I go to change the files and I delete them, add the new stuff, all seems fine. Then I unmount it and everything I deleted is back and everything I added is gone. I've uninstalled apps and they come back, I've done updates to apps and they revert back to before the update.
I've gone into CMW and done the wipes and even formatted sdcard, cache, etc. Nothing works. Even mounting USB in CWM to add files gives the same result of them disappearing right after it is unmounted.
I've tried ACMEUnistaller but it doesn't work. I saw something flash by the screen about something failing, but it goes too fast to even really see what it's about.
Sorry this is so long. I appreciate any insight!
Kernel
2.6.35-palm-tenderloin
[email protected]ost #12
CyanogenMod version:
9.0.0-RC0-Touchpad-alpha2
Build Date
Mon, Feb 20 13:59:21 CST 2012
Build Number
IML74K
plasticsoldier said:
I didn't really see anything that fits my current problem (sorry if there is an answer somewhere buried in here)
So to start off with info, I installed Android on the TP back in February for my fiancée just for the basics of email, videoplayer, comic reader, internet browsing. Nothing too extravagant, just something with more to offer than webos.
I never did any updates on it because it worked perfectly fine for what it was being used on.
I've changed out the video selection many times as she watches through the shows with no problems.
Now I go to change the files and I delete them, add the new stuff, all seems fine. Then I unmount it and everything I deleted is back and everything I added is gone. I've uninstalled apps and they come back, I've done updates to apps and they revert back to before the update.
I've gone into CMW and done the wipes and even formatted sdcard, cache, etc. Nothing works. Even mounting USB in CWM to add files gives the same result of them disappearing right after it is unmounted.
I've tried ACMEUnistaller but it doesn't work. I saw something flash by the screen about something failing, but it goes too fast to even really see what it's about.
Sorry this is so long. I appreciate any insight!
Kernel
2.6.35-palm-tenderloin
[email protected] #12
CyanogenMod version:
9.0.0-RC0-Touchpad-alpha2
Build Date
Mon, Feb 20 13:59:21 CST 2012
Build Number
IML74K
Click to expand...
Click to collapse
I've run across this 3 times with TPs I work on....
1st one had to be sent back to HP because somehow internal memory was damaged and got locked in some some of read only mode
2nd one I saw, I went into webOS, installed the internalz app, mounted the TP to the computer, then added and erased some files and from then on all was good in both webOS and Android
3rd and 4th (same customer) had to be sent in to HP
Now let me mention I live in Costa Rica so all these have been exposed to several scans at airport security checkpoints. I mention this because I haven't seen anything close to a read only problem with the TPs in the USA
Sent from my aokp_tenderloin using Tapatalk 2
thank you so much for the info. Unfortunately Internalz didn't want to help the items stay deleted either. The stuck in read-only type mode is very weird.
I'm pretty sure I am 3 weeks out of the 1-year warranty on it, plus I am unable to remove android from it to even trick them that it just doesn't work.
I guess I'll try webos doctor and see if that can get it going.
edit: webos doctor not working, even with the closing it at 8-12% tricks and doing the lvm.static..... stuff... 'cause it of course doesn't see to actually delete anything... i'll have to double check tomorrow when i bought it, pretty sure it's over the year and since it turns on and has android kinda screwed
plasticsoldier said:
thank you so much for the info. Unfortunately Internalz didn't want to help the items stay deleted either. The stuck in read-only type mode is very weird.
I'm pretty sure I am 3 weeks out of the 1-year warranty on it, plus I am unable to remove android from it to even trick them that it just doesn't work.
I guess I'll try webos doctor and see if that can get it going.
edit: webos doctor not working, even with the closing it at 8-12% tricks and doing the lvm.static..... stuff... 'cause it of course doesn't see to actually delete anything... i'll have to double check tomorrow when i bought it, pretty sure it's over the year and since it turns on and has android kinda screwed
Click to expand...
Click to collapse
I would suggest trying to restore down to WebOS 3.0. In that procedure you literally wipe EVERYTHING on the internal partitions in novaterm and start from absolute scratch. Therefore, if it a software issue you could solve the problem. However, if it is a hardware issue, you'd be kinda screwed.
Yeah, none of the methods I've ended up finding about this problem or other bricked problems are working at all.
i checked at work when i bought it, which of course the 11th was the year mark... but I do have android installed so even if i can get any chance of them honouring it so close they'll probably be like "oh you have android, that'll be $$$ for us to do anything. thanks!"
So I guess I now I have a paperweight with some features.
cdzo72 said:
I've run across this 3 times with TPs I work on....
1st one had to be sent back to HP because somehow internal memory was damaged and got locked in some some of read only mode
2nd one I saw, I went into webOS, installed the internalz app, mounted the TP to the computer, then added and erased some files and from then on all was good in both webOS and Android
3rd and 4th (same customer) had to be sent in to HP
Now let me mention I live in Costa Rica so all these have been exposed to several scans at airport security checkpoints. I mention this because I haven't seen anything close to a read only problem with the TPs in the USA
Sent from my aokp_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
When you got the tablets back had they been fixed or were they refurbs ? Did HP say anything about Android still being on it?
There is a thread in the General forum about how to restore and downgrade. Have you tried that thread ? It is usually a great way to try and get that last restore before sending it back to HP.
73 de VE6AY
Sent from my HP Touchpad, running the latest CM9 nightly, from the XDA Premium App
how are you adding and deleting files when in android? which version of android do you have installed? have you tried different rom versions? have you tried moving and/or deleting files over adb? are you using windows or linux on your computer that youre connecting the touchpad to? it doesnt make sense that the sdcard would be set to read only. is it only certain folders that you cant modify the contents of, or is it the entire sdcard? are you able to modify contents of folders in the / directory of the device using root file explorer or es file explorer in android? have you run "fix permissions"? Also, running webosdoctor wont wipe the sdcard contents or format the sdcard in any way. its going to change the data in the webos partition and may change some data in the /boot directory.
sstar said:
When you got the tablets back had they been fixed or were they refurbs ? Did HP say anything about Android still being on it?
Click to expand...
Click to collapse
They had been fixed but the owners sent them off and had to pay for the whole thing because they had Android on them. When I got my hands on them again I just reinstalled Android. HP charged a little over a hundred dollars for the fix
Sent from my aokp_tenderloin using Tapatalk 2
cdzo72 said:
They had been fixed but the owners sent them off and had to pay for the whole thing because they had Android on them. When I got my hands on them again I just reinstalled Android. HP charged a little over a hundred dollars for the fix
Sent from my aokp_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
Thanks for the answer, this would tend to suggest that the problem is software based corrupted or otherwise. I am trying to find a program that will allow me to read/format the Android partition on my windows computer and will let you know if come up with anything.
Regards
i guess i should change the title slightly.. it's not sdcard, but basically the entire touchpad contents. go to root and delete whatever i want and it doesn't matter. connect it and format with windows and it doesn't actually matter.
haxin said:
how are you adding and deleting files when in android?
Click to expand...
Click to collapse
i've added and deleted just by using mtp. i've also deleted the files on the android side with the video player (vplayer) i've installed es file explorer (which after restart is gone) and deleted with that. i've also gone into webos and installed internalz pro and deleted files that way, which it then seems to work until i of course do anything related to restarting.
some of the files i've put on, i've had it recognize briefly. so for the video file, start it, then it gets really choppy/glitchy playing it. so stop it, go back into the vplayer and it's back to the old stuff
which version of android do you have installed? have you tried different rom versions?
Click to expand...
Click to collapse
android version 4.0.3. nothing else will install. if i add files while in android, when i boot into cwm they are gone. if i mount usb in cwm and add them they stay briefly but when i try to flash them they fail.
have you tried moving and/or deleting files over adb? are you using windows or linux on your computer that youre connecting the touchpad to?
Click to expand...
Click to collapse
i have not tried adb yet, just not as familiar using it properly, i will give it a try though.
i am using windows 7 on my laptop currently. i do have a pc upstairs that i barely use that has vista, but i don't know how that would make a difference to the touchpad
it doesnt make sense that the sdcard would be set to read only. is it only certain folders that you cant modify the contents of, or is it the entire sdcard?
Click to expand...
Click to collapse
yeah as i put above i guess saying sdcard was a bit confusing/misleading (my bad, sorry!), i didn't really know what else to call it at the time or how to explain myself properly at first.
are you able to modify contents of folders in the / directory of the device using root file explorer or es file explorer in android?
Click to expand...
Click to collapse
i can move/delete/modify anything which has absolutely no effect to the device. i've used es file explorer and gone up to root and deleted everything and the system runs fine. says the system is empty with lots of free space (its the 32gb model) but restart or even go into recovery and everything is once again there.
have you run "fix permissions"?
Click to expand...
Click to collapse
i've run it a few times. just acts likes it's working and then says done. i've even gone into the mounts and storage in cwm and formatted sdcard/cache/data/system. does nothing at all in the end of things
Also, running webosdoctor wont wipe the sdcard contents or format the sdcard in any way. its going to change the data in the webos partition and may change some data in the /boot directory.
Click to expand...
Click to collapse
it was just something to try to get somewhere right. it never gets past 12%. always fails to reboot.
I am currently letting the battery drain and see if it dying and then being charged will do anything. probably not. but who knows. i talked to a "tech" on the chat support (i never mentioned android) who told me that having preware installed in webos causing it to become corrupt and they "don't knowledge of preware installed devices" exact words. no idea what that means haha don't have knowledge, don't acknowledge...
anyhow. i've not quite given up. i just don't really see it turning out any differently from the previous times. i do appreciate all the feedback and help very much though
ok so heres what I would try. First try flashing a new fresh rom. download one that you want to your computer like cm9 nightly or aokp or whatever you feel like. then boot into CWM recovery connect the touchpad to the computer via usb. then connect to the touchpad with adb. I'm not sure how to do this in windows because it's been so long since I've done it on a windows box, I always use linux.
adb has alot of options, you can move files to and from the device, you can uninstall or install app packages, and more. this way you can adb push the rom .zip to the touchpad's sdcard while youre in cwm recovery. this way you dont have to reboot the touchpad and risk having the file disappear, you can just go to 'install zip from sdcard' and then 'choose zip from sdcard' in cwm recovery after you adb push the rom, you should see it in the folder you pushed it to on the sdcard.
If you arent familiar with how to use adb from the command line or the terminal this might not make alot of sense and i dont know how better to explain it than that. Also yes windows 7 vs windows vista does make a difference there are issues with novacom installing properly, that's why you would have problems running acmeuninstaller or acmeinstaller2. if you look around you should find some videos or how to's that can probably explain it better. Hope this helps.
http://www.webos-internals.org/wiki/Novacom_with_Windows_7
http://forums.webosnation.com/webos-internals/295881-webos-doctor-12-issue-fixed-5.html
http://forum.xda-developers.com/showthread.php?t=1426244 is the thread I was talking about - it allows you to access the hard root of the device, repartition it, and start again from scratch. It is what I was suggesting last night, from my tablet when I didn't have the link handy.
ve6ay said:
http://forum.xda-developers.com/showthread.php?t=1426244 is the thread I was talking about - it allows you to access the hard root of the device, repartition it, and start again from scratch. It is what I was suggesting last night, from my tablet when I didn't have the link handy.
Click to expand...
Click to collapse
Probably the best suggestion yet given that everything else has been tried.
Good luck.
****EDIT****
Before you attempt the step above I have just noticed a difference between between cwm and. TWRP2.2 which I have installed on my Touchpad via goo manager. If I open recovery via goo manager and then select wipe it gives me 4 options cache, davlik, factory reset AND system which i think says will remove your rom . I don't see the forth option available with the regular cwm/clockwork. Just a thought.
All the best with whatever you try next.
sstar said:
Probably the best suggestion yet given that everything else has been tried.
Good luck.
Click to expand...
Click to collapse
this would work, however you have to fix you novacom/novaterm issues on your windows machine before you'll be able to do any of this. the reason acmeuninstaller, acmeinstaller2 arent working is likely because youre on a windows7 64bit box and Palm-sdk, the novacomd.exe, noverm.exe, and javaruntime apps and drivers arent setup right. just make sure you have the proper javaupdates on your computer then you can install preware in webos, preware has some nice tools that will delete the entire android install partitions, one is called 'remove android' and the other is called 'tailor' you run them from within webos. after you do that then in webos you should do a full device reset. you'll find it in the "info" tab under settings in webos. this will delete and reformat the whole /media ,(aka sdcard) partition. so you will lose all the files you have stored on both webos and android. that format will take a long time probably like 30 min or more. after thats done. reboot the hp and run webosdoctor. now i know for sure this will work because ive done it on mine. remember to put the touchpad in developer mode in webos first to install preware. you can do that by typing webos20090606 into the webos search bar and hitting enter. I'll put links from my box.com accou t to everything you need.
https://www.box.com/s/479acdb6ef9c99fc7b92
https://www.box.com/s/1aed4722990aad251570
edit: also I'm not sure if youre on the 16gig 32gig or 64gig pad, the webosdoctor that i linked is for 32gig wifi only US version. if thats not what you have then youll need to get the doctor for for specific touchpad. or you could create a webosmetadoctor but thats a whole nother project.
i have the 32gb version. i assume US and Canadian aren't gonna make a difference
i've tried all those threads. any novacom/novaterm stuff doesn't work, the files won't delete so when trying to recreate they just error saying it already exists.
if the devices is on in androind the adb can find the device although the "Serial" has a bunch of ???? at the end of it. when i go to cwm adb cannot find the device.
in cwm i can mount and add files that way and go back to install zip sdcard but get:
Code:
--Installing /sdcard/aokp_tenderloin_milestone-4.zip
Finding update package...
Opening update package...
E: Can't open /sdcard/aokp_tenderloin_milestone-4.zip
(bad)
Installation aborted
used "remove android" in webos, but then nothing is different after the fact as usual. 'tailor' doesn't seem to exist anymore in preware at least that i can find
not sure if there is anything else I can do at this point
plasticsoldier said:
i have the 32gb version. i assume US and Canadian aren't gonna make a difference
i've tried all those threads. any novacom/novaterm stuff doesn't work, the files won't delete so when trying to recreate they just error saying it already exists.
if the devices is on in androind the adb can find the device although the "Serial" has a bunch of ???? at the end of it. when i go to cwm adb cannot find the device.
in cwm i can mount and add files that way and go back to install zip sdcard but get:
Code:
--Installing /sdcard/aokp_tenderloin_milestone-4.zip
Finding update package...
Opening update package...
E: Can't open /sdcard/aokp_tenderloin_milestone-4.zip
(bad)
Installation aborted
used "remove android" in webos, but then nothing is different after the fact as usual. 'tailor' doesn't seem to exist anymore in preware at least that i can find
not sure if there is anything else I can do at this point
Click to expand...
Click to collapse
ok no one will be able to help you fix this issue unless you give complete details of the problems. when you say " novacom/novaterm stuff doesn't work" we cant really help specific error details is what i need. I dont mind helping you fix this but you have to be a little more specific on exactly what,where, and how youre installing and running and mounting apps and directories.
your problem IS fixable but you need to slow down and really do things exactly step by step.
Ok so back to ./adb. now when you boot in to CWM recovery on he touchpad DONT do anything in CWM just plug it into the computer. do not mount it as a usb storage and dont mount or unmount the sd partition LEAVE IT.
you can then use ./adb from the command line or terminal on the computer to move the files to the touchpad' or install apk's uninstall apk's you name it. This will require that you know some linux terminal commands. for example to move a new rom zip to the internal sd card or into any other folder you can use ./adb push command to run a root shell on the android device itself you can use ./adb shell and then change folder and file properties from readonly to rw. this can all be done while the touchpad is patiently waitng in CWM recovery. this way when youre done installing or uninstalling apps from the device and moving flash zips to it, you can disconnect the .adb connection with ./adb disconnect or just type exit from the terminal till it closes. unplug it then you will be able to pick up the touchpad and install zip from the sdcard, keep in mind you dont want to choose 'apply u[date from sdcard' you want to use the 'install zip from sdcard option' you can read up more on how adb works. it is probally the most important part of hacking android.
with that being said. novaterm is the palm webos version of .adb. this is why when you boot into webos recovery to do things like acmeinstaller and acmeuninstaller2 the novaterm novacom and novacomd apps have to be installed correctly on the computer or else you wont be going anywhere fast. some screenshot examples of how it should appear below.
https://www.box.com/s/432e63a83215f00eea6a
https://www.box.com/s/970bc29542a05f98f036
https://www.box.com/s/63c0f656e8354f7f2d6a
https://www.box.com/s/cbe3266467ae8e3ebabe
https://www.box.com/s/005e56a61a178dd17fa4 some better resolution images.
Plasticsoldier said
used "remove android" in webos, but then nothing is different after the fact as usual. 'tailor' doesn't seem to exist anymore in preware at least that i can find
not sure if there is anything else I can do at this point
Yes there is
Firstly tailor does exist, it is a beta and the facility to dl must be enabled.
Read this and scroll down to Enabling beta test feeds and follow the instructions , when you get as far as using the Linux command you CAN copy and paste thank God.
http://en.m.webos-internals.org/wiki/Testing_Feeds?wasRedirected=true . After that reboot into Webos and launch preware. Go into managed feeds as per the instructions in the link above and install Tailor. Reboot again and the app will work. It looks very good actually.
But before attempting to actually use Tailor please read the article I have posted below it is only 7 pages long but will explain how to use Taylor properly as it is a powerful tool.
http://forums.webosnation.com/webos...partition-filesystem-editor-beta-testing.html
I have done all of this , this morning so if you have any problems pm me or ask in this thread.
I sincerely hope that this helps, it should be the answer to your problems.
@haxin: sorry, wasn't trying to be unhelpful when everyone is being helpful to me. I shall be more detailed in future responses. I think i was getting frustrated and had had a busy exhausting day so it didn't help me come across clearly/properly.
OK, so I had preware installed already, so I removed it, went into developer mode, used the linux commands, reinstalled preware, added Tailor.
(i've done this a few times, because I didn't remove the cable after doing the linux commands for preware, then i accidentally hit the wrong buttons and it connected to 'usb drive' mode and wouldn't connect on the pc side and got stuck on the "ow disconnected me properly next time" screen).
So it gives me the following options
USB (media)
Android (system)
Android (cache)
Android (data)
Unused Space
the 'usb media' starts mounted and will mount again if unmounted. If I use 'check filesystem' it'll pass. So then I try 'delete partition' which pretends to delete, then it takes me to the unused partition which is still at 16mb. so i try to use "check filesystem' again and it fails. try repair and it fails as well
I've tried mounting the android parts just to see, they just sit there processing that they are trying to mount. trying to delete or anything else fails as well.
and now after trying things, any of the 'cards' will try to open and just sit there grey. and with my usb cable not plugged in it still is giving me the option to enter usb drive mode. and with this i have to restart and go through the steps again of adding Tailor which is getting tedious.
I restarted, went through the motions to get back to Tailor. trying out resizing just to see how that goes. So far 15%. not sure what will happen when done, but we will see.
This is getting long, so i'll end this part and update on anything and also try to familiarize myself with adb a tad more
I don't know what I've done to my KF2. I have successfully rooted the device, and have even been in fastboot for something I tried (can't remember what, just that I was trying to properly root my device). But I have about 14 programs that won't remove off my device (they only show "Add to Favorites" on my device instead of the additional option to remove from device)? I cannot get into ES File Manager and delete them. The .apk's for these files are located in the system folder, and even when I mount root in ES File Manager, I can't delete any of the files in the folder.
I also have a lot of problems with my toolbars randomly flickering on and off. But nothing I've read and tried, except for restoring the device and rerooting it again fixes this problem. I've also looked at a lot of posts that tell me to do a command with the /data/local.prop file. But I don't have this file on my kindle. I've searched for it everywhere using ES File Manager. I do have a /data/default.prop file, however. But I can't use ADB commands on that file either.
So I was advised to get a factory cable so that I can boot into fastboot. But I can use KFFIRSTAIDE to get into that successfully. Can anyone tell me what I've done to my kindle, what programs, and what commands I need in order to fix this problem? I'm not an idiot; I successfully rooted 3 KF2's and a KFHD successfully before this monster of a device came along!
herrenfam said:
I don't know what I've done to my KF2. I have successfully rooted the device, and have even been in fastboot for something I tried (can't remember what, just that I was trying to properly root my device). But I have about 14 programs that won't remove off my device (they only show "Add to Favorites" on my device instead of the additional option to remove from device)? I cannot get into ES File Manager and delete them. The .apk's for these files are located in the system folder, and even when I mount root in ES File Manager, I can't delete any of the files in the folder.
I also have a lot of problems with my toolbars randomly flickering on and off. But nothing I've read and tried, except for restoring the device and rerooting it again fixes this problem. I've also looked at a lot of posts that tell me to do a command with the /data/local.prop file. But I don't have this file on my kindle. I've searched for it everywhere using ES File Manager. I do have a /data/default.prop file, however. But I can't use ADB commands on that file either.
So I was advised to get a factory cable so that I can boot into fastboot. But I can use KFFIRSTAIDE to get into that successfully. Can anyone tell me what I've done to my kindle, what programs, and what commands I need in order to fix this problem? I'm not an idiot; I successfully rooted 3 KF2's and a KFHD successfully before this monster of a device came along!
Click to expand...
Click to collapse
Well, if you can reboot into fastboot via KFFA, than no, you don't necessarily need a fastboot cable. Have you tried removing these programs via ADB? If you ADB shell into the device, does the command "su" work? System apps can't be uninstalled the normal way, you have to manually delete them from "/system/app/" yourself. But that's weird that you can't get ES to work. Which version of ES file explorer are you using? I know the new version requires you to not only turn root explorer on, but you have to tap two radial dials to switch it from "/system" from RO (read only) to RW (read writable).
Hope this helped
Ph0enix_216 said:
Well, if you can reboot into fastboot via KFFA, than no, you don't necessarily need a fastboot cable. Have you tried removing these programs via ADB? If you ADB shell into the device, does the command "su" work? System apps can't be uninstalled the normal way, you have to manually delete them from "/system/app/" yourself. But that's weird that you can't get ES to work. Which version of ES file explorer are you using? I know the new version requires you to not only turn root explorer on, but you have to tap two radial dials to switch it from "/system" from RO (read only) to RW (read writable).
Hope this helped
Click to expand...
Click to collapse
What command(s) would I use to remove these programs? The only command I know is "ADB SHELL su". I am not an idiot at computer software, but I was absent on the day they handed out the intelligence on DOS commands.
And how would I get rid of the associated program files? Or do I just leave them on the drive?
What I would really like to do is unroot the device (which seemed to screw it up last time I tried it), restore to factory defaults as to erase all this gibberish, and restart from fresh, with a clean slate and then a clean root. Can that be done? How would I accomplish that? Like I said, it seemed that I the problems with the programs not uninstalling started with the restoring of the device, be it by unrooting it or by restoring the device to factory defaults on the kindle.
PS: yes, I can get into SU on ADB on my computer. I just don't know where to go from there. And my ES File Explorer is V. 3.0.9.0. I looked in the settings and could not find a option to change file to RW.
herrenfam said:
What command(s) would I use to remove these programs? The only command I know is "ADB SHELL su". I am not an idiot at computer software, but I was absent on the day they handed out the intelligence on DOS commands.
And how would I get rid of the associated program files? Or do I just leave them on the drive?
What I would really like to do is unroot the device (which seemed to screw it up last time I tried it), restore to factory defaults as to erase all this gibberish, and restart from fresh, with a clean slate and then a clean root. Can that be done? How would I accomplish that? Like I said, it seemed that I the problems with the programs not uninstalling started with the restoring of the device, be it by unrooting it or by restoring the device to factory defaults on the kindle.
PS: yes, I can get into SU on ADB on my computer. I just don't know where to go from there. And my ES File Explorer is V. 3.0.9.0. I looked in the settings and could not find a option to change file to RW.
Click to expand...
Click to collapse
The commands to remove bloatware and stuff (in this case, apps) would be:
Code:
adb shell
su
mount /system
rm /system/app/nameofapp1.apk
rm /system/app/nameofapp2.apk
rm /system/app/nameofapp3.apk
reboot
If a clean slate is what you want, then you can use this tool here to flash three stock Kindle partition images (boot.img, recovery.img, and system.img) to your Kindle via fastboot. The images aren't of the latest firmware, but I don't think OTA updates are disabled, so you can just let your Kindle auto update over wi-fi.
If "su" works in the ADB shell, then I guess you are rooted. I don't know what to say from there, except to backup whatever data you can and start fresh.
Ph0enix_216 said:
The commands to remove bloatware and stuff (in this case, apps) would be:
Code:
adb shell
su
mount /system
rm /system/app/nameofapp1.apk
rm /system/app/nameofapp2.apk
rm /system/app/nameofapp3.apk
reboot
If a clean slate is what you want, then you can use this tool here to flash three stock Kindle partition images (boot.img, recovery.img, and system.img) to your Kindle via fastboot. The images aren't of the latest firmware, but I don't think OTA updates are disabled, so you can just let your Kindle auto update over wi-fi.
If "su" works in the ADB shell, then I guess you are rooted. I don't know what to say from there, except to backup whatever data you can and start fresh.
Click to expand...
Click to collapse
Thanks a great deal. Where is the program to flash the three stock .img files so I can have a from-the-beginning kindle? I've already got the only thing I need from the device - a list of the third-party apps and where I downloaded them from.
herrenfam said:
Thanks a great deal. Where is the program to flash the three stock .img files so I can have a from-the-beginning kindle? I've already got the only thing I need from the device - a list of the third-party apps and where I downloaded them from.
Click to expand...
Click to collapse
...I forgot to post the link, didn't I?
Here it is: http://forum.xda-developers.com/showthread.php?t=2096888
>>>Sent from my homebuilt TARDIS running Android 4.0.3... or maybe it's a rooted Kindle Fire HD<<<
I'm seeing a few posts and qquestions about this with the latest Lollipop release being upon us.
There are several issues here and I wanted to write a quick note aboyut them both for you
1) You cannot SEE your /sdcard data after updating to lollipop
Cause:
Some strange difference between L and KK, where /storage/emulated and /data/media are not "alligned"
Fix:
Open a terminal emulator application and enter the following 2 line command (Press enter after each line)
Code:
su
restorecon -FR /data/media/0
Reboot
2) You have lost permissions to /sdcard
Cause:
You restored all your sdcard data using adb push or MTP whilst booted into recovery. IT screws up your permissions. These methods are fine for single files or backups that you waant to flash or restore, but as soon as you start pushing folders, this issue will be seen
Fix:
In a root explorer app, browse to /data/media/0 and locate your Download folder. Set the permissions for all on Download to read / write (Long press the Download folder > permissions)
Download and flash THIS ZIP from the thread below.
[TOOLS][ZIPS][SCRIPTS] osm0sis' Odds and Ends [Multiple Devices/Platforms] (by @osm0sis)
You can also download the zip to a computer and adb push it / MTP via recovery
3) 32 GB device shows the storage of 16 GB version
Cause:
Unknown. This has actually been happening since the Nexus 5 was released
Fix:
Wipe cache and data
4) TWRP backups are missing
Cause:
This is really unknown. We're not even sure that this can be fixed. Some say its a TWRP bug but that cannot be proven.
Sometimes backup folder is empty....
Fix:
Multiple things you can try. Some have to use restorecon command but usually that has to be done after every backup.
Others have just flashed the factory images
Some of us have never had issues so its hard to call it a bug, but there is definitely something funky going on here.
Other times, backups shows as an unknown file type, 0bytes in size. I haven't a specific fix as I have had no feedback from anyone who has fixed it. You could try deleting that unknown file then running the fix above.
Also, please update to TWRP 2.8.3.0
5) All I see in /sdcard is 0 folder
Cause:
Well known issue on /data/media/0 devices - which is the location of the /sdcard. Unsure of the cause on Nexus 5 though
Fix:
/sdcard is in /data/media/0. If you see a 0 folder in /sdcard, you're actually seeing /data/media/0/0.
To fix, just move /data/media/0/0/* to /data/media/0
I updated without a problem. Be sure to update to latest SDK and to wipe sdcard, eg. clean install.
Sent from Pure Nexus 5
alen1901 said:
I updated without a problem. Be sure to update to latest SDK and to wipe sdcard, eg. clean install.
Sent from Pure Nexus 5
Click to expand...
Click to collapse
Yep, the first issue is fine if you wipe your /sdcard.
The second one is caused by restoring your sdcard afterwards
I have used always Mixplorer and now after flashing 5.0 I cant see nothing under /root. Why so? Something with root permissions? everything else is ok. ( I want to modify build.prop a little )
do I need use some other file explorer?
restorecon -FR /data/media/0 fixed a problem I had with a bad TWRP folder on my Nexus 10 - many thanks!
rootSU said:
Yep, the first issue is fine if you wipe your /sdcard.
The second one is caused by restoring your sdcard afterwards
Click to expand...
Click to collapse
I restored everything except data and android folders back to sdcard, i even restored obb files and no problems at all. It is the best practice for users to restore only their data, not the ones android creates itself. Im sure most people just selects everything and transfer to pc/stick, then copy everything back.
Sent from Pure Nexus 5
Thanks dude. I wish I had this information this morning - would've saved me a lot of sweat.
I'm facing some serious issues today with this.
At first I encountered the issue when installing the flashable update. The OP suggested to execute few command lines in a terminal emulator, but it would only have worked if you rooted your device with cfroot. So I tried to re-root with cfroot with no luck: it kept saying already unlocked. At this point in the settings said I had 3/3 free gigs of storage. Out of desperation I tried to flash every single part of the stock image via fastboot, and re-do the procedure with cfroot and all. However after doing all of that I ended up with 12/12 free gigs, which is what I'm left with right now. I also tried to fix the permissions either with the root explorer app and by flashing the the provided fix, but nothing has happened. No traces of either Titanium backups or whatever files I had before on my storage, it's basically like a new phone with a blank 12 gb storage (keep in mind I have the 32 gb version). I really don't know what to do at this point anymore. Have I by any mean flashed the partitions of a 16 gb variant or something? Will I ever be able to get my storage back? Any help wuld be much appreciated.
Update: apparently I also flashed userdata so my phone believed to be a 16 gb unit. A data wipe fixed it. Obviously my storage is gone but that's my bad, I'll be more careful before udating next time.
vnvman said:
I'm facing some serious issues today with this.
At first I encountered the issue when installing the flashable update. The OP suggested to execute few command lines in a terminal emulator, but it would only have worked if you rooted your device with cfroot. So I tried to re-root with cfroot with no luck: it kept saying already unlocked. At this point in the settings said I had 3/3 free gigs of storage. Out of desperation I tried to flash every single part of the stock image via fastboot, and re-do the procedure with cfroot and all. However after doing all of that I ended up with 12/12 free gigs, which is what I'm left with right now. I also tried to fix the permissions either with the root explorer app and by flashing the the provided fix, but nothing has happened. No traces of either Titanium backups or whatever files I had before on my storage, it's basically like a new phone with a blank 12 gb storage (keep in mind I have the 32 gb version). I really don't know what to do at this point anymore. Have I by any mean flashed the partitions of a 16 gb variant or something? Will I ever be able to get my storage back? Any help wuld be much appreciated.
Update: apparently I also flashed userdata so my phone believed to be a 16 gb unit. A data wipe fixed it. Obviously my storage is gone but that's my bad, I'll be more careful before udating next time.
Click to expand...
Click to collapse
Yeah that's a different but common issue.
Thank you, rootSU. This fixed my issue.
So I have tried the fixes and all of my files are still in sdcard/0 and not just sdcard... Any help I can't figure this out?
rizhqrd said:
So I have tried the fixes and all of my files are still in sdcard/0 and not just sdcard... Any help I can't figure this out?
Click to expand...
Click to collapse
Move them manually.
Tried the first solution as it seems to be my issue, but it doesn't seem to work. Any ideas?
tomp100 said:
Tried the first solution as it seems to be my issue, but it doesn't seem to work. Any ideas?
Click to expand...
Click to collapse
Please explain your issue.
Hey thanks for this post. I've been through this issue like 3 times and keep forgetting about restorecon.
On that note, I was getting the following output:
~ # restorecon -FR /data/media/0/
restorecon: invalid option -- F
Click to expand...
Click to collapse
The fix appears to work without the "F" flag. Do you know why this is not a valid flag?
According to a general rundown of restorecon, the "F" flag does the following:
-F
Force reset of context to match file_context for customizable files, and the default file context, changing the user, role, range portion as well as the type.
Click to expand...
Click to collapse
RVDigital said:
Hey thanks for this post. I've been through this issue like 3 times and keep forgetting about restorecon.
On that note, I was getting the following output:
The fix appears to work without the "F" flag. Do you know why this is not a valid flag?
According to a general rundown of restorecon, the "F" flag does the following:
Click to expand...
Click to collapse
Not sure but glancing at the Dev preview thread, some had success with this:
restorecon -r /data/media/0/*
Tried both, all that happened is that /sdcard is now blank. /data/media/0 still lists all of the files, but /sdcard itself is empty or unlinked or something. I unfortunately don't know which of the two steps did it.
Quick question, I'm currently on slimkat and plan on clean flashing tonight via bigxies ROM. With this method of fixing the SD card, I won't lose all my data as far as downloads, pictures, etc.?
rootSU said:
Please explain your issue.
Click to expand...
Click to collapse
Essentially, the phone doesn't think it has an SD card. When i click on SD card in root browser, it is empty. Items that were on the SD card in 4.4.4 are now located in data/media/0/0 , and I am unable to move these items to SD. Also, if I try to dowload sonething off the internet, I get a "no SD card" message.
I can confirm that my issues were caused by importing my backed up /SDCard/ data via an "adb push" while in recovery.
If doing the same while the phone is booted into system, permissions are set appropriately and no further action is required.
Thanks again for this post!
I'm starting this thread to move the topic out of another forum.
I encountered the issue of TWRP not being able to write to the internal storage after downgrading to 4.4.4 and only flashing the boot, system & baseband images from the KXE package Motorola provides.
It gave the error message errno=13
It gave the same error on 4.4.4 & 5.0
I had double-checked all permissions & symlinks.
To fix the issue I had to re-flash the KXE recovery, reboot the bootloader & then reflash TWRP 2.8.6.0, then all was well with both 4.4.4 & 5.0
adm1jtg said:
Not sure if this solves the error 13 or not but I can confirm using your process exactly OTG is still broken on 2860 and still works in 2850 so separate issue I would guess but since I need OTG for my backups and restores I will keep using the modded 2850 for now. Can you confirm on your setup if OTG works or not from within twrp. On mine the drive light doesn't even come on, I cannot mount it it just vibrates and I cannot backup to it. All the correct options are there but it cant access the drive at all..
Click to expand...
Click to collapse
@adm1jtg Can you backup to the internal storage?
defcondev said:
@adm1jtg Can you backup to the internal storage?
Click to expand...
Click to collapse
I had other weird issues. Initially mine would backup internally just fine but those files could not be viewed from rom side aka root explorer and such couldn't see files. Only twrp could see the backup files. I then formatted the sdcard and got the error #13 error.
To be honest I FINALLY got my phone setup and backed up the way i want it. The newly re-released 2850 works in all aspects I have tested, aka no error 13, can see files backed up internally on rom side, can see and use otg thumb drive for both backups and restore. Since 2850 works for all I need I really am not overly motivated to test much with 2860 just to be honest with you.
Since I confirmed that OTG is still broken in 2860 that makes using 2860 a deal breaker for me.
adm1jtg said:
I had other weird issues. Initially mine would backup internally just fine but those files could not be viewed from rom side aka root explorer and such couldn't see files. Only twrp could see the backup files. I then formatted the sdcard and got the error #13 error.
To be honest I FINALLY got my phone setup and backed up the way i want it. The newly re-released 2850 works in all aspects I have tested, aka no error 13, can see files backed up internally on rom side, can see and use otg thumb drive for both backups and restore. Since 2850 works for all I need I really am not overly motivated to test much with 2860 just to be honest with you.
Since I confirmed that OTG is still broken in 2860 that makes using 2860 a deal breaker for me.
Click to expand...
Click to collapse
I had that issue as well (not being able to view the TWRP folder);
The folder wasn't showing up in storage/sdcard but was showing up in data/media/0
To fix this there are a couple things you need to do;
1. Using a terminal emulator, execute the following command
su
restorecon -FR /data/media/0/*
2. Using a root-enable file browser, go to /data/media/0/ and change both the Owner & Group of the TWRP folder to "media_rw" (without quotes) and make sure permissions are set to drwxrwxr-x
defcondev said:
I had that issue as well (not being able to view the TWRP folder);
The folder wasn't showing up in storage/sdcard but was showing up in data/media/0
To fix this there are a couple things you need to do;
1. Using a terminal emulator, execute the following command
su
restorecon -FR /data/media/0/*
2. Using a root-enable file browser, go to /data/media/0/ and change both the Owner & Group of the TWRP folder to "media_rw" (without quotes) and make sure permissions are set to drwxrwxr-x
Click to expand...
Click to collapse
Different scenario as i had that happen to me on my 2013 where it went into a 0 folder. This was not the case on the 2014 it LITERALLY didnt exist anywhere, the twrp folder existed with NOTHING under it. But in twrp all files and file structure were visible and working. Mass storage did show the space being taken up of course.
Just to clarify all this mess and all these issues are cause I was going back and forth between lp and kk. It was not REALLY an issue with twrp per say EXCEPT the otg not working... that IS specifically a twrp issue near as i can tell
Hello guys,
I hope someone can help me with this problem...
So the thing is - yesterday I finally got OneUI 3 and Android 11 update (yay?). But ofcourse as soon as the phone rebooted and optimised all the apps and came back to main screen it rebooted after a minute or so...everytime. As soon as I enter my pin and unlock the phone it reboots after a short period.
The same problem happened when I de-bloated the phone a while ago via ADB - but I then enabled back all the apps except facebook and some "safe to debloat apps" which were not even system apps and it has since worked for almost a year. But here we go again....
I even "re enabled/installed" all the apps I could list in ADB ( so basically all the apps on the phone) and then went to wipe cache - but still no go.
I am also wondering if there is a posibility to somehow mount storage just to copy some files to my computer (which are important, and my latest backup is around a month old) and then I'll gladly do a a factory reset - no problem.
Any help would be appreciated, thanks!
If you're able to use ADB to enable/install apps, then you should be able to use "adb pull path/to/files" to copy the files to your computer. You could reboot into recovery mode and see if your computer pulls up the storage that way too. Also, if you have TWRP, you can use the file system to copy files to an external SD card. So you have a few options to get your files.
You can also create a back-up of specific apps (and their data) using "adb backup -f MyBackUpName.ab com.corp.AppName".
TacoDeMuerte said:
If you're able to use ADB to enable/install apps, then you should be able to use "adb pull path/to/files" to copy the files to your computer. You could reboot into recovery mode and see if your computer pulls up the storage that way too. Also, if you have TWRP, you can use the file system to copy files to an external SD card. So you have a few options to get your files.
You can also create a back-up of specific apps (and their data) using "adb backup -f MyBackUpName.ab com.corp.AppName".
Click to expand...
Click to collapse
Hello, thanks for the reply and helping out.
But all the commands and stuff is kinda useless because the phone reboots sooner than in 30 seconds after getting to the main screen. When I boot to recovery the storage doesn't get mounted.......
And I would've had TWRP but the phone is still under warranty so that's a shame, because on my backup phone I have it (and so did on all the previous ones) and it would be great. But IIRC if I install TWRP now, the phone needs to be wiped.
FFS samsung, what is this....because I now read a couple threads and posts on social media people having exactly same problem, and some didn't do anything with ADB prior to update. shame...