Related
Can any one advice me how to improve the video quality in WMP 10 on the Tytn II
Compared with my previous Tytn I, the movies & clips do not play fluid, though RAM and ROM are better, and no other programs are running.
Same Sd card, same movie which plaid well on 30 FPS format plays rather chunky on the Tytn II. Is the Qualcomm CPU lesser compliant than the old one or so?
Some Reg tweaks to perform? (and which tweaker to use / download from where?)
Thanks guys!
For Information: According to the data sheet of the chipset it is providing uncompromising video quality for Video capture and playback
(30 fps VGA - even for Messageing) http://www.cdmatech.com/download_library/pdf/msm7200_chipset.pdf
Maybe, but i fear the drivers are not playing nice with the new chipset
I mean, i understand the problem with TCPMP, since is third party software and it stopped being developed (at least the freeware app), but it shouldn't be any problem with the shipped software, right?
Here is to hoping for an updated driver... GO HTC!
could this be why they say to use activesync to transfer everything onto the p4550? maybe its not optimised for it or something. but still shouldnt lag like that
Maybe it is a lame question, but does ActiveSync automatically converts video&/mp4 to a format more digestable by the device? Like SPB Mobile DVD?
my impressions
Hi !
I also noticed that video playback is kinda bad on the TyTN II, compared to my Prophet (overclocked to 260MHz). When using TCPMP and even Coreplayer, the DirectDraw rendering mode is about 3 times slower than Raw Framebuffer mode, which makes me believe that it's a DDraw / drivers issue. Since WMP 10 most likely uses DDraw, that's probably why the video is lagging...
So: If you use TCPMP / Coreplayer, MAKE SURE YOU DON'T USE DIRECT DRAW . If you use WMP 10, i have no idea if you can choose not to use DDraw.
It's still kinda weird that the TI OMAP 200Mhz (OC @ 260Mhz) on the Prophet performs about the same as the "ultra fast brand new never before seem" MSM7200 400MHz when it comes to raw power (again, ignore DDraw case, where Prophet is 3 times faster, that will be fixed soon... i hope...)
GL&HF
RPG0 said:
Hi !
I also noticed that video playback is kinda bad on the TyTN II, compared to my Prophet (overclocked to 260MHz). When using TCPMP and even Coreplayer, the DirectDraw rendering mode is about 3 times slower than Raw Framebuffer mode, which makes me believe that it's a DDraw / drivers issue. Since WMP 10 most likely uses DDraw, that's probably why the video is lagging...
So: If you use TCPMP / Coreplayer, MAKE SURE YOU DON'T USE DIRECT DRAW . If you use WMP 10, i have no idea if you can choose not to use DDraw.
It's still kinda weird that the TI OMAP 200Mhz (OC @ 260Mhz) on the Prophet performs about the same as the "ultra fast brand new never before seem" MSM7200 400MHz when it comes to raw power (again, ignore DDraw case, where Prophet is 3 times faster, that will be fixed soon... i hope...)
GL&HF
Click to expand...
Click to collapse
Have noticed the same thing. Using corecodec rawfb is the best option. Having said that I can watch h.264 AVC encoded at 400KBPS no problem. On my wizard watching anything other than DVI was pretty much impossible. So the processor has the power - we just need the drivers to back it up now.
Unfortunately this is the price you pay for being an early adopter. I imagine once the at&t version comes out drivers wont be long behind.
Don't people find a general slowness with the Kaiser? My old XDA Mini S OC'd to 260Mhz seemed so much quicker in many ways. The 400Mhz processor in the Kaiser is definitely quicker in some areas, but twice as quick as the old 200Mhz XDA? I think not. Here's hoping HTC release a new ROM soon. Bad news is I can't even see it on the HTC eClub site!!
Your MDA, running what? WM2003SE?
WM2003SE in general could be faster than WM5/6 because WM5/6 is Flash based. That means, the persistent storage. You wont loose your app when the battery is empty, but yeah you must pay the price.
UncleJimbo said:
Don't people find a general slowness with the Kaiser? My old XDA Mini S OC'd to 260Mhz seemed so much quicker in many ways. The 400Mhz processor in the Kaiser is definitely quicker in some areas, but twice as quick as the old 200Mhz XDA? I think not. Here's hoping HTC release a new ROM soon. Bad news is I can't even see it on the HTC eClub site!!
Click to expand...
Click to collapse
RPG0 said:
Hi !
So: If you use TCPMP / Coreplayer, MAKE SURE YOU DON'T USE DIRECT DRAW . If you use WMP 10, i have no idea if you can choose not to use DDraw.
GL&HF
Click to expand...
Click to collapse
TCMP should be the solution as clips / movie do not lag with this one. Even Direct draw enabled is OK.
Issue is that do not support AAC plug-in, making MP4 movies useless.
Anyone tweaking the reg, or waiting for new drivers for this video performance issue?
(i do not supose HTC thinks that 3g standard should be used no? )
ceevee369 said:
TCMP should be the solution as clips / movie do not lag with this one. Even Direct draw enabled is OK.
Issue is that do not support AAC plug-in, making MP4 movies useless.
Anyone tweaking the reg, or waiting for new drivers for this video performance issue?
(i do not supose HTC thinks that 3g standard should be used no? )
Click to expand...
Click to collapse
I'm pretty sure DirectDraw is 3 times slower.
Can you please benchmark on a clip with and without DDraw ?
I would really want to know if there are ROMs out there with DDraw fixed
BTW: this is KAISER SPECIFIC, does not apply to other PPCs afaik
Hello.
There is exactly the same pb on my new LG KS20 (MSM 7200 chip too)
I can't read video or play game with a decent frame rate
2 months later and still no fix for the slow performance in Video.
I installed the Coreplayer, took 2 weeks to play around with all settings, though no big changes. Directdraw enabled play s "OK". (no dither)
I guess the best thing to do is to ask CorePlayer which settings fit best on the Tytn II
It's all because of the missing video driver the the Qaualcomm 7200 chipset, if I watch a video on my Tytn 2 with TCMP using direct draw the fps feel 10 fps, now my original Touch with the 201mhz Omap 850 cpu plays the same video with direct draw very smoothly
We need video drivers
Radeon123 said:
It's all because of the missing video driver the the Qaualcomm 7200 chipset, if I watch a video on my Tytn 2 with TCMP using direct draw the fps feel 10 fps, now my original Touch with the 201mhz Omap 850 cpu plays the same video with direct draw very smoothly
We need video drivers
Click to expand...
Click to collapse
I hope you signed the petition to HTC yes?
i forward the link to the petition to Cnet Asia. Hope they will make some noise!
Yes I signed the petition, read the petition post, glad HTC are aware of it
Radeon123 said:
Yes I signed the petition, read the petition post, glad HTC are aware of it
Click to expand...
Click to collapse
Aware? Maybe, but do they care?
Maybe I'm the fly in the ointment but I have created lots of mp4 files from my normal video and use wm player and everythings great. Sorry
j1ngles said:
Maybe I'm the fly in the ointment but I have created lots of mp4 files from my normal video and use wm player and everythings great. Sorry
Click to expand...
Click to collapse
Which MP4 convertor did you use and what is the FPS now? on 30, things become nasty, though 10 is stable.
I have neithe isues with small videoclips, though playing an AVI or MPEG file directly (712mb) is crappy for sure
ceevee369 said:
TCMP should be the solution as clips / movie do not lag with this one. Even Direct draw enabled is OK.
Issue is that do not support AAC plug-in, making MP4 movies useless.
Anyone tweaking the reg, or waiting for new drivers for this video performance issue?
(i do not supose HTC thinks that 3g standard should be used no? )
Click to expand...
Click to collapse
TCPMP DOES support AAC with a plug-in that they are not allowed to host any more. It, however, is considerably worse than the one in CorePlayer.
If you do need it, I dig up the download URL of the AAC plug-in for you.
Have anyone here already tried tcpmp 0,81 RC1 beta, I got it now but is has a new option voor GAPI in video driver... It seems to make no difference between GAPI or rawframebuffer, but i noticed there is also a ati config file inside....
Im already started to tweak it a little bit by trying to use QTV as overlay but so far no luck.... Also noticed that the sound is reducing the videoplayback by 50% with default.mpeg first 96% score, and with no sound suddenly 172% score..... does anybody know if the audiodriver can be tweaked as well...
Cheers
Hey guys
Title says it all
I was wondering, after all the new drivers that have been released and all the discussions has any1 actually been able to use the Kaiser as a decent video player??
Ive been trying, tweaking Core Player, trying different drivers, different setting when i encode etc etc... But i cant get the video to play smoothly! I still get "tearing" between scenes... Its just not a pleasure to watch
Anyone else had more luck of late??
Try this: http://forum.xda-developers.com/showthread.php?t=357330
So i guess then the short answer is... No??
I see that Core Player has its own codec or whatever it is, meant specially for the Qualcomm CPU, to try and get adequate video performance out of it... But for some reason when i use "video output QTV" i just get a purple block on the screen and audio!!!
Of the remaining options, Directdraw, raw framebuffer and GDI, does any1 know what the pros and cons are? Do any seem to work better than the rest??
Will try the MP4 tip tonight and see if it helps!
I can play YouTube stuff just fine on my Tilt with the newest TCPMP. Haven't tried other stuff yet.
randomguy321 said:
So i guess then the short answer is... No??
I see that Core Player has its own codec or whatever it is, meant specially for the Qualcomm CPU, to try and get adequate video performance out of it... But for some reason when i use "video output QTV" i just get a purple block on the screen and audio!!!
Of the remaining options, Directdraw, raw framebuffer and GDI, does any1 know what the pros and cons are? Do any seem to work better than the rest??
Will try the MP4 tip tonight and see if it helps!
Click to expand...
Click to collapse
I use coreplayer version 1.2.2 and QTV display driver delivers up to 70% better performance than TCPMP. Try to find a solution to your problem on coreplayer forum.
Where did you get the 70% number from?
Im not sure if this helps...but
I converted a few movies that I had downloaded a while back thru windows media player...I think Pulp Fiction or something. It played just fine. Great video, great audio, good synchronization. Really impressive. All this on AT&T Tilt.
Keep working on it or flash a ROM since most have the support u need to watch the video. Honestly, u would probably benefit from reading the forums for about flashing a ROM than to mess with new codecs and other drivers.
Have u tried downloading TCPMP and core player. Install both. Then open TCPMP in background. Now open ur windows media player and try to play a video.
Now if u can stream videos from ninjavideo.net ur doing better than I
Cheers
-ac
Found this on the CorePlayer forums....Seems ambiguous at best...
http://forum.corecodec.com/viewtopic.php?f=4&t=1044
It seems that they have an option to enable "TyTN II driver mode" but they dont actually support the processor in the TyTN II...Odd!!
Apparently version 1.2.5 has a fix for the black screen in QTV mode (on WM 6.1 ROMs) does any1 have 1.2.5 to verify this??
That's right, they've fixed it.
randomguy321 said:
Found this on the CorePlayer forums....Seems ambiguous at best...
http://forum.corecodec.com/viewtopic.php?f=4&t=1044
It seems that they have an option to enable "TyTN II driver mode" but they dont actually support the processor in the TyTN II...Odd!!
Apparently version 1.2.5 has a fix for the black screen in QTV mode (on WM 6.1 ROMs) does any1 have 1.2.5 to verify this??
Click to expand...
Click to collapse
ChumleyEX said:
Where did you get the 70% number from?
Click to expand...
Click to collapse
There's a benchmark option in coreplayer. Play an avi file first on QTV driver and then on Rawframe buffer you'll see the difference. Than if you're still not convinced you can play the same file in TCPMP on rawframebuffer and compare the results.
Youtube w/ the new manilla 2d works flawlessly for me, as does any .flv i just plop on the phone (without re-encoding). Streaming mobitv is a bit laggy. But other then that my video runs great. For awhile quicksilverscreen was working str8 off the website too. (seems to not be working atm however).
I installed no new video drivers or anything just manilla2d. .flv has always worked since i installed the tmpg stuff.
Yes I Can!!!!
Just installed Core Player 1.25 and it works PERFECTLY!!!!
QTV works in the new ROMs in V1.25 and it plays my videos perfectly! Benchmarking, my frame rates arent much different to the RAW buffer, but the videos visually play better, there is no tearing as scenes change, they look great....
V1.25 does the trick!!!
randomguy321 said:
Just installed Core Player 1.25 and it works PERFECTLY!!!!
QTV works in the new ROMs in V1.25 and it plays my videos perfectly! Benchmarking, my frame rates arent much different to the RAW buffer, but the videos visually play better, there is no tearing as scenes change, they look great....
V1.25 does the trick!!!
Click to expand...
Click to collapse
could you help a noob out, maybe with download links or something...
first of all, what is QTV? is it better than tcpmp? how do I get youtube videos to work? what is v1.25? I am using duttys 6.1 rom, this will work on my phone right?
sorry for all the questions.
brilliantslide said:
could you help a noob out, maybe with download links or something...
first of all, what is QTV? is it better than tcpmp? how do I get youtube videos to work? what is v1.25? I am using duttys 6.1 rom, this will work on my phone right?
sorry for all the questions.
Click to expand...
Click to collapse
here is what i think of from the top of my head...qtv is one of the options in the video driver selection in Coreplayer...Coreplayer is the paid version of tcpmp...From my experience, it really smoothens out the transition of scenes in this mode, but it also depends on how the video is encoded I think, coz' the movies I had encoded much earlier which i used with my treo 650 were still choppy even with the qtv display....But my recent acquisition, Ironman, it plays quite flawlessly...
v 1.25 refers to the latest version of Coreplayer, which fixes most of the bugs of earlier version...You can scope it out at corecodec.com, but sadly there is no trial version for it though so if you really want to watch and play videos on your tilt, it might be worth it for you...
As to the youtube videos, you can either:
Buy and use Coreplayer
Download the Youtube player extracted from the opal
Use the recomp version of tcpmp, the orginal won't work on the 6.1 so look for the recomp
Or if you wanna show off a bit on the bus or something, download opera 9.5 and flashlite 3.1, The flash vid will play as a part of the web page....
hello all
i have a standard xvid clip (640x272) that can only play @ 20.8fps on core player(stock rom) (with itje 10.1 ROM i get 21.3fps)
the same clip plays @ 23.8fps on the touch HD and 24.3 diamond 2(stock ROMs)
i tried so many other clips as benchmarks and its evident that the x1 is constantly %18-%20 slower than other HTC devices with identical specs (cpu and resolution)
can anyone explain this phenomena? i sure hope that there is light at the end of the tunnel
What do you have installed on it? Perhaps some background processes, like panelmanager?
come to think of it, its not just the video that is constantly slower on the x1. its the whole ROM in general (navigating between various wm programs, switching between applications....etc) is clearly much slower on the xperia even though it has the same CPU speeds (just look at an video review of the tp2 or td2 in youtube and you can clearly see how they are much faster)
even the fastest x1 cooked roms are noticeably slower than the HD,td2 and tp2 stock roms
hope SE can do something about that and i hope and i hope our chefs can eventually close the performance gap.
Angelusz said:
What do you have installed on it? Perhaps some background processes, like panelmanager?
Click to expand...
Click to collapse
its actully a fresh flash (itje 10.1) with only core player installed now not even emails or contacts are added yet
do you get better performance on reasonably good quality XVID dvdrips (close to 640x272 resolutions)
What coreplayer version did you use to test? I can try installing the same and see what I get. Also, what settings?
Same problem here, videos always cease in the first seconds.
By the way, which coreplayer version is the best to use for xperia?
im not facing a bug like F-Styla as it does not suffer from the stuter i just have constant low performance compared to HD and td2
i just benchmarked the video on an ancient HTC macian and i got 39fps!!!!!!! (on qvga resolution though)
using full version of coreplayer 1.3.2
THE GRIZZ said:
im not facing a bug like F-Styla as it does not suffer from the stuter i just have constant low performance compared to HD and td2
i just benchmarked the video on an ancient HTC macian and i got 39fps!!!!!!! (on qvga resolution though)
using full version of coreplayer 1.3.2
Click to expand...
Click to collapse
Since I discovered this great app (http://forum.xda-developers.com/showthread.php?t=467590) never had a problem viewing any video. Great resolution, small size of files, no lags.
However, I heard somewhere that coreplayer can't use hw acceleration on X1. Do not know if that's true also for HTC, but that could explain the performance differences
[email protected] said:
Since I discovered this great app (http://forum.xda-developers.com/showthread.php?t=467590) never had a problem viewing any video.
Click to expand...
Click to collapse
reencoding videos is not really a solution if you ask me
-my understanding that full qtv support is coming with ver2.0
my problem is that why the heck is the x1 so much slower (in everything)than identically specd devices like the HD. is there an easy way to varify that we are runiing at the FULL 528mhz and overclock in case we are not
THE GRIZZ said:
reencoding videos is not really a solution if you ask me
-my understanding that full qtv support is coming with ver2.0
my problem is that why the heck is the x1 so much slower (in everything)than identically specd devices like the HD. is there an easy way to varify that we are runiing at the FULL 528mhz and overclock in case we are not
Click to expand...
Click to collapse
Somewhere here in this forum I read that actually the X1 is NOT running at full speed. I know, I have not been really precise... but with a little bit of search you can find out the thread I am talking about.
I think all HTC devices except the original XDA have video sync/playback issues. There are tons of threads on this. Get yourself a PMP to enjoy quality videos.
X1 runs at 400 mhz currently, although the processor is in fact 528 mhz. The downgrade is made in order to save power and lower heat levels. You can check the current speed by installing an app like HomeScreen++.
I would like to see what the X1 can do with the full 528 mhz, but I haven't seen any solution for it so far.
I enjoy perfect quality after I downloaded the app from the front page.
orelsi said:
X1 runs at 400 mhz currently, although the processor is in fact 528 mhz. They downgrade is made in order to save power and lower heat levels. You can check the current speed by installing an app like HomeScreen++.
I would like to see what the X1 can do with the full 528 mhz, but I haven't seen any solution for it so far.
I enjoy perfect quality after I downloaded the app from the front page.
Click to expand...
Click to collapse
i got a program that can change clockspeed .. up to 528 , with nice settings like , lower it down @ backlight off , lower it down @ power button
it can still play mp3 at only 62mhz badass phone lol
i had it cooked in my rom Touch X 6.1.2b
programs called nueCPL - ClockSpee v1.2 (Build117)
www.nuerom.com
http://www.nuerom.com/BlogEngine/page/nueDynamicClock.aspx
THE GRIZZ said:
reencoding videos is not really a solution if you ask me
-my understanding that full qtv support is coming with ver2.0
my problem is that why the heck is the x1 so much slower (in everything)than identically specd devices like the HD. is there an easy way to varify that we are runiing at the FULL 528mhz and overclock in case we are not
Click to expand...
Click to collapse
I experienced the same slowness using Coreplayer, I am using v1.2.5.
After I put a non Touch-flo on the SEX1 I did not have a slow Coreplayer anymore, so I would suggest try a different ROM and see if the problem is still there.
I am using gtrabs wm6.5 rom and I have no problem playing video on Coreplayer without reencoding the video.
souljaboy said:
programs called nueCPL - ClockSpee v1.2 (Build117)
www.nuerom.com
http://www.nuerom.com/BlogEngine/page/nueDynamicClock.aspx
Click to expand...
Click to collapse
-just installed it
its says im already @528 (not 400mhz). i changed everything to 528mhz on all settings but that did not help in fact for some dumb reason in getting even less performance now @19.18 fps
-installed home screen ++ but im not sure where the settings is to show current speed (will look more after i reflash)
-turned off touchflo3d also didnt help
-this 400MHZ thing seems like a major problem with the X1, are you sure its true? i would imagine a lot of noise and complaints if it were true ?
-will go and flash into a beare bones rom now to see if it helps
souljaboy said:
i got a program that can change clockspeed .. up to 528 , with nice settings like , lower it down @ backlight off , lower it down @ power button
it can still play mp3 at only 62mhz badass phone lol
i had it cooked in my rom Touch X 6.1.2b
programs called nueCPL - ClockSpee v1.2 (Build117)
www.nuerom.com
http://www.nuerom.com/BlogEngine/page/nueDynamicClock.aspx
Click to expand...
Click to collapse
Thanks! That works to make it feel quite a bit snappier (I know its not scientific, but haven't benchmarked anything)
I am also having a video problem, rather than make new thread I post it here.
Well, not a single HD video plays on my Xperia now, Coreplayer tries to but its so choppy and insane which I now know doesn't use hardware acceleration.
Now after converting the video with Touch HD video converter software, WMP says "The source filter for this file could not be loaded."
I also found this: http://forum.xda-developers.com/showthread.php?t=365381
But still nothing at all.
Any solutions? Must I change ROMs to play HD videos?
weird I don't have any problem with video performance, I'm using coreplayer and they just flies!!!!!!!
wazaaappp said:
weird I don't have any problem with video performance, I'm using coreplayer and they just flies!!!!!!!
Click to expand...
Click to collapse
thats weird. are sure your video files are good resolution
can you make sure of the resolution of the file. also did you use the benchmarking tool in core player
i changed the rom but im getting the same results
THE GRIZZ said:
-just installed it
its says im already @528 (not 400mhz). i changed everything to 528mhz on all settings but that did not help in fact for some dumb reason in getting even less performance now @19.18 fps
-installed home screen ++ but im not sure where the settings is to show current speed (will look more after i reflash)
-this 400MHZ thing seems like a major problem with the X1, are you sure its true? i would imagine a lot of noise and complaints if it were true ?
Click to expand...
Click to collapse
- I think its under ...options - indicators.... IIRC.
- It is major and was talked about quite a lot when the X1 was launched.
DeeChan said:
I am also having a video problem, rather than make new thread I post it here.
Well, not a single HD video plays on my Xperia now, Coreplayer tries to but its so choppy and insane which I now know doesn't use hardware acceleration.
Now after converting the video with Touch HD video converter software, WMP says "The source filter for this file could not be loaded."
I also found this: http://forum.xda-developers.com/showthread.php?t=365381
But still nothing at all.
Any solutions? Must I change ROMs to play HD videos?
Click to expand...
Click to collapse
I had a similar issue when I messed up my video drivers with something I installed. The only solution was a hard reset.
hey people ive spent weeks trying to play a smooth video on my x1 so far everything i done had failed whether it was wmp or tcpmp or even coreplayer,read almost every post tried almost every converter and pretty still stuck seems as if my old tytn plays videos smoother so i can only hope coreplayer releases a new version soon! if anyone knows anything please post thanks
Zeyn Karim said:
hey people ive spent weeks trying to play a smooth video on my x1 so far everything i done had failed whether it was wmp or tcpmp or even coreplayer,read almost every post tried almost every converter and pretty still stuck seems as if my old tytn plays videos smoother so i can only hope coreplayer releases a new version soon! if anyone knows anything please post thanks
Click to expand...
Click to collapse
What ROM do you use?
I am able to play the Bond trailer (.mp4) without problems, with WMP and TCPMP.
Link to TCPMP:
http://forum.xda-developers.com/showthread.php?t=634951
im using the pheonix rom build 56502 WWE. is this tcpmp any better than the latest coreplayer? because so far coreplayer played videos better than wmp and tcpmp although it was still laggy maybe it's my drivers but im using the omina driver and get a better benchmark than the rest with sktools 792 to be exact
i've been using the video encoder provided in the sticky and it has by far surpassed all other video encoders that i've used. it takes advantage of the hardware acceleration in the X1 but the only video app that uses it is WMP and the Media Panel.
azian_advanced said:
i've been using the video encoder provided in the sticky and it has by far surpassed all other video encoders that i've used. it takes advantage of the hardware acceleration in the X1 but the only video app that uses it is WMP and the Media Panel.
Click to expand...
Click to collapse
I don't know bout you but using that encoder takes 6 to 7 hours and sometimes it freezes, I don't have the time and patience for that. @ Zeyn Karim I have a collection of video drivers that might maybe improve your performance. Not 100% sure it will but I guess it won't hurt to try.
tried and failed with that converter lol even waited a whole night to encode only to be dissapointed the next morning.
anyway thanks guys for the support and drivers will run couple tests and let ya know the results hopefully this will solve my problem not sure why but my media player doesn't seem to run as good as everyone claims it does, i should remove the omina driver lets hope that's the problem
tried every driver and no luck! looks like i'll never be able to watch anything on my xperia! so i give up! stupid coreplayer! what's taking them so long! been reading up and looks like they rather work on the stupid UI instead of focus on HW support! i don't care if coreplayer looks crap! only thing i want is a smooth crisp video is that too much to ask! Ahhhhhhhhhhhhhhhh!
Yeah I'm kinda disappointed as well. I was watching a lot of videos on my old wm 5.0 smartphone but the Xperia fails. I activated "Raw FrameBuffer" and videos got smoother - still don't think thats what you are looking for...(only tried out fairly low quality movies...)
Zeyn Karim said:
tried every driver and no luck! looks like i'll never be able to watch anything on my xperia! so i give up! stupid coreplayer! what's taking them so long! been reading up and looks like they rather work on the stupid UI instead of focus on HW support! i don't care if coreplayer looks crap! only thing i want is a smooth crisp video is that too much to ask! Ahhhhhhhhhhhhhhhh!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=684106
This version of TCMP I get video playback in GDI mode very smooth I watched Shutter Island on it with no lag.
Yeah,my old tytn may not have been the best phone in the world but atleast i could watch some of my favourite shows whenever i felt like.
thanks viper89 will test out the tcpmp,glad to see youve been watching something on your x1,can you please state which encoder you used and are you also using the omina driver?
Zeyn Karim said:
Yeah,my old tytn may not have been the best phone in the world but atleast i could watch some of my favourite shows whenever i felt like.
thanks viper89 will test out the tcpmp,glad to see youve been watching something on your x1,can you please state which encoder you used and are you also using the omina driver?
Click to expand...
Click to collapse
I actually didn't encode the video, I don't watch movies that much so I really don't bother with encoding and the one that is stickied takes ages to encode . The video drivers that are installed in my phone are:Chainfire-HD2-3D-Driver-Patch-2.0( not sure if this has any effect in are phones),Chainfire-TG01-D3DM( not sure if this any effect either lol),Driver_Ati d3d, SJ SamsungOmnia_Driver_D3D and optxperiabeta02( It makes the sound in the X1 louder but it also said that it changes the video driver to.)
Wow you installed all of them! what's your benchmark with sktools? and does the "optxperiabeta02" damage your speaker in any way? if not could you please post it thanks,Is it a noticable difference?
Zeyn Karim said:
Wow you installed all of them! what's your benchmark with sktools? and does the "optxperiabeta02" damage your speaker in any way? if not could you please post it thanks,Is it a noticable difference?
Click to expand...
Click to collapse
My Sktool benchmark is: Integer 331, Floating Point 7.71, Draw Bitmaps 656. Also a important fact is it also depends on your rom Stock or none Stock and if it's 6.1 or 6.5 and if your running Sense 2.5 in your rom(which I am), so my stats most likely would be higher in a stock 6.1 rom. I've had my phone for 8 month and been using optxperiabeta02 for 7 month and no speaker damage. And it makes a hell of a noticeable difference lol.
my benchmark is integer 331, floating point 7.47 ,ram access 1519 , draw bitmaps 800 , main write 11070 ,main read 17066 still have no idea why im having video problems.by the way im running 6.1 with manilla 2.5 sense
Zeyn Karim said:
my benchmark is integer 331, floating point 7.47 ,ram access 1519 , draw bitmaps 800 , main write 11070 ,main read 17066 still have no idea why im having video problems.by the way im running 6.1 with manilla 2.5 sense
Click to expand...
Click to collapse
Hmm draw bitmaps 800 nice. It might because your on 6.1 oppose to my 6.5. Your still having videos problems playing videos in GDI mode in TCMP?
http://forum.xda-developers.com/
showthread.php?t=684106 havnt got a chance to test yet but will try as soon as i get time did you try kinoma play? im interested to find out hows the playback. damn coreplayer if only they would support our HW id would be so awesome!
Guys there is really a simple answer to this thread: There is only one solution for decent video playback on Xperia X1. Convert your movies to mp4 (h264 avc codec, max. resolution 800 * 480, bitrate 600 kbps) and play them in WMP or Media Xperience Panel (I prefer the latter). You can either use the converter provided by xda (projection) or any other software that supports this codec. There might be some differences in duration of a convertion and it is definitely dependant on your computer's specs (processor) but generally converting videos is a time consuming task and 6 - 7 hours isn't really inappropriate for entire movies (2-3 hours). Everything else won't work. Coreplayer, Pocketplayer, Kinoma etc. do not support hw acceleration and thus 480 * 320 is the maximum resolution that can be played back using those players. If you want high quality movies (what is definitely possible on the Xperia X1) you will have to face convertion to the right format. There aren't any drivers that do miracles and there aren't any insider tips. Only convertion will do the trick.
thank you altae for those bad/good news
Maybe I'm missing something. I've never had any problems playing videos or movies on my X1. Just rewatched Princess Blade on it the other day, in fact.
The truth can sometimes be hard But let's stay serious: It's a pity that WMP or Media Xperience Panel do not support more codecs especially the very widely used xvid/dvix codecs.
But the positive news are: It's definitely possible to play high quality movies as long as they are in the right format. And for all the short videos you would like to show a friend you have always the possibility to play divx/xvid movies in 480 * 320 which isn't that bad for this purpose.