Hey all,
I just bought an Asus RT-AC66u because it says that you can use your phone's USB tethering as the WAN. I'm having trouble connecting the phone to the router.
I have the phone, a 2013 X, 4.4.4, on Verizon, connected to the router. It shows up as USB modem on the main page on the router settings, but I can't get an internet connection between the two. On the USB WAN settings page I don't know what to put as the settings. I've left it as default, #777... I've tried putting in a username/password as ###@vzw4g.com, vzw... I've tried putting in APN services as vzwinternet... nothing works!
Could anyone spare a few moments and help me? I'd be much obliged!
Edit: I should mention that if I plug my phone directly into my computer it works just fine.
Related
sorry i know this is off mobile networking topic but i would like to know if there is a way to connect my pc to a router with out using wires?
please if you can provide step by step instructions
thanks in advance
get a wifi card maybe usb but there are pci ones too
if it's a laptop it may have wifi build in
if your router got wifi
you can just set it up
otherwise you need to replace your router with one with wifi
or you just just buy a wifi router and connect it to your current router
its a desktop and yes my router has wifi but is there a way i can connect my desktop to the router wirelessly?
ariel123 said:
its a desktop and yes my router has wifi but is there a way i can connect my desktop to the router wirelessly?
Click to expand...
Click to collapse
As stated, you can either buy a PCI card, or a USB adapter for wireless. I believe I've seen the USB adapters for as low as $20 in stores, and you don't have to open up your case.
The step by step for the USB would be (loosely based on general knowledge):
Buy the USB adapter (your router most likely supports B & G, go with G if at all possible, if your router supports N, even better), install the necessary software drivers and such. Make sure your router is configured to accept wireless connections. Go to either http://192.168.1.1 or http://192.168.0.1 depending on the brand, and type admin for the user and admin for the password, unless your router has different configurations. Click on the wireless tab, and follow the settings on screen to setup. Now, try to connect your PC by right clicking on the wireless icon down in the taskbar, and scan for wireless networks. When your's is found, click connect, and enter any password you may have given your wireless connection (recommended), this password is not set by default, usually, and if it is, the password will most likely be listed on your router somewhere.
I hope that helps. This is just assuming a lot of things, though. List what OS you're running, and your router model, and I may be able to give you more advice, or someone else might.
Guys and gals...
i've searched my query here in this forum but still couldn't find the exact solution.
Im pretty new to this entire "android" platform. just got my nexus one rooted and unlocked.
my only concern here is regarding "wifi Problem". I've got linksys Compact wirelss-G USB adapter (WUSB54GC).
Now I don't know how to access it just like a router.
Secondly, When i started using it with nexus one it connected without any flaw. But some days after It's not connecting with N1, having said that
I've also used this adapter with Ipad2 and sometimes the wifi doesn't connect to the ipad2 properly.
Now how I was connecting like I always delete the existing adhoc connection and create another one and then try to connect... after few tries it connects but after few days N1 says obtainig IP address... and in windows 7 the status says connected with "no network access"
I tried "WEP and other protocols" and also without any encyption as well but nothing is working here.
Actually In our country we dont have 3G network we're still on EDGE and that costs us much so here I'm relying on my home USB 1MB connection to use it via adapter.
Currently Im using Oxygenmod FINALE
Please help me whether it's my N1 or the adapter or should there be anything wrong with the Radio i've got v4.06. with oxygen1mod finale
Ask me anything If u feel.
And yeah BTW I didn't know that Android is an open source so u can call me a "Nwwwwweeeeebbbb"
I am not familiar with Oxygenmod, but if it is Gingerbread based, I would highly recommend updating your radio to 5.08.
bassmadrigal said:
I am not familiar with Oxygenmod, but if it is Gingerbread based, I would highly recommend updating your radio to 5.08.
Click to expand...
Click to collapse
Thanks... But let me update it that I've just updated to 5.12 radio... I was too curious that's y i played the bet. after update nothing seems to me different network signals are same i.e 100% blutooth working and havnt tried EDGE. WiFi still not working and stuck at "obtaining IP address"
Actually In our country we dont have 3G network we're still on EDGE and that costs us much so here I'm relying on my home USB 1MB connection to use it via adapter.
I don't believe these phones have proper support for ADHOC, but it seems it is more of a computer problem if the ipad is having issues as well. Is there a reason you are trying to do an adhoc wireless network instead of getting a cheap wireless router?
bassmadrigal said:
I don't believe these phones have proper support for ADHOC, but it seems it is more of a computer problem if the ipad is having issues as well. Is there a reason you are trying to do an adhoc wireless network instead of getting a cheap wireless router?
Click to expand...
Click to collapse
well it's the first time I've got this USB adapter so I only know of this adhoc connection being made in win 7. havnt experienced a router though.
but could u please confirm if any cheap router supports my USB internet connection? (i dont have a DSL connection rather wireless)
Gablu said:
well it's the first time I've got this USB adapter so I but could u please confirm if any cheap router supports my USB internet connection? (i dont have a DSL connection rather wireless)
Click to expand...
Click to collapse
I doubt any router would support the usb wireless adapter, but you can use windows internet connection sharing to share the connection through the wired connection. Then you can hook the router into your ethernet port on your computer and share the connection that way.
Definitely not the easiest, but I have never tried sharing an internet connection through an adhoc wireless connection.
bassmadrigal said:
I doubt any router would support the usb wireless adapter, but you can use windows internet connection sharing to share the connection through the wired connection. Then you can hook the router into your ethernet port on your computer and share the connection that way.
Definitely not the easiest, but I have never tried sharing an internet connection through an adhoc wireless connection.
Click to expand...
Click to collapse
I think I need to clear something here....
My ISP gave me a USB called (EVO), I just plug that "EVO" into my computer and I can download upto 3.1Mbps and browse and surf yada yada...
then I bought "linksys USB adapter" to make my internet connection WiFi.
Now how would I connect my N1 to internet via WiFi when u say "adhoc" is not supported.
Is there anything apart from what "Bassmadrigal" suggested.? (caz it sounds too technical for me)
I don't know if ADHOC is actually supported (and if it is, how well it is supported) on Android. But if you are having issues with devices other than your phone, then I think it is going to be a computer issue that probably won't be able to be fixed with any devices on your phone.
I can try to make it a bit more non-techincal...
Buy a cheap wireless router and use the router's guide to get a wireless network set up
Plug in the network cable from the computer's network card to the "internet" port on the router
Follow this guide to get Internet Connection Sharing up and running on your computer
???????
Profit
I have already set up the chromecast with my wireless network through my phone. It seems there is no way to get it to work with my wired PC that is on the same network. I am assuming that this is just the way it is and I'd like to confirm that.
jbaruch76 said:
I have already set up the chromecast with my wireless network through my phone. It seems there is no way to get it to work with my wired PC that is on the same network. I am assuming that this is just the way it is and I'd like to confirm that.
Click to expand...
Click to collapse
You need to be sending a wireless signal to the chromecast so no I don't think it will work on ethernet
My desktop works hardwired into my router, no problems. Just downloaded the extension for Chrome, and it worked.
Sent from my SGH-T889 using Tapatalk 2
Evo4gLI said:
My desktop works hardwired into my router, no problems. Just downloaded the extension for Chrome, and it worked.
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
well that is interesting. i have the extension installed, but it just says "no cast devices found." it works from phone, tablet and laptop. not sure what the problem could be.
jbaruch76 said:
well that is interesting. i have the extension installed, but it just says "no cast devices found." it works from phone, tablet and laptop. not sure what the problem could be.
Click to expand...
Click to collapse
When setting it up the first time it does a Wireless to wireless connection from your phone or Wifi Computer to the device. If you don't have Wifi on your computer you will need to use the phone for the initial setup. Once it is on the wireless network you can connect with any device connected to that network, wired or wireless. well that is once your router does not sepereate the wireless and wired clients
I'm having this same problem with my chromecast. Chrome cannot find the chromecast on the desktop; on Wifi or on ethernet. My laptops and all my android devices work without a problem though. Hopefully google hammers out some of these bugs
msm903 said:
When setting it up the first time it does a Wireless to wireless connection from your phone or Wifi Computer to the device. If you don't have Wifi on your computer you will need to use the phone for the initial setup. Once it is on the wireless network you can connect with any device connected to that network, wired or wireless. well that is once your router does not sepereate the wireless and wired clients
Click to expand...
Click to collapse
I hope this is how it'll work, as my network is similar. Router in the living room, with a cable going into a powerline Ethernet jack, emerging in my room where it connects to my desktop computer. So of course for initial setup I will need to use my phone or tablet because my desktop can't find the Chromecast if it's not connected to the router. But I'd certainly hope I can cast from desktop once the dongle has connected to the wi-fi.
Just to be sure - you're not running Windows XP are you? Because apparently XP is not compatible with Google Cast...
Router settings
Ensure you don't have your router settings on "isolate" (d'oi!)
Disable (or enable) any IGMP daemon.
Review your router settings - everything look sane? Any key words pop up?
uninstall your wireless network drivers and then scan for hardware changes; just let your computer reinstall the drivers. just got off the phone with the chrome ninjas and that fixed my problems.
I am also unable to see to see my Chromecast from wired PC's on my network. I tried disabling firewall, and checked all of my router settings. It's the stock Verizon router. I don't get it. It's a major negative that I can't see it from wired PC's.
foghelmut said:
I am also unable to see to see my Chromecast from wired PC's on my network. I tried disabling firewall, and checked all of my router settings. It's the stock Verizon router. I don't get it. It's a major negative that I can't see it from wired PC's.
Click to expand...
Click to collapse
I'm also on fios, so i'm thinking it's a problem with their router. I was going to try it later, but i found some information. If you login to the router then go to this site http://192.168.1.1/index.cgi?active_page=6059 and it give you some IGMP settings, which are hidden otherwise.
jbaruch76 said:
I'm also on fios, so i'm thinking it's a problem with their router. I was going to try it later, but i found some information. If you login to the router then go to this site http://192.168.1.1/index.cgi?active_page=6059 and it give you some IGMP settings, which are hidden otherwise.
Click to expand...
Click to collapse
That fixed it, thanks.
No trouble here with seeing Chromecast over Ethernet. Using a WRT54GL with Tomato installed.
My pc is connected to a airport express by Ethernet and I'm able to cast from it.
Sent from my HTC One using Tapatalk 4 Beta
solve?
solve?i have the problem with my HTC
jbaruch76 said:
I'm also on fios, so i'm thinking it's a problem with their router. I was going to try it later, but i found some information. If you login to the router then go to this site http://192.168.1.1/index.cgi?active_page=6059 and it give you some IGMP settings, which are hidden otherwise.
Click to expand...
Click to collapse
Disabling IGMP on my Verizon FIOS router resolved the issue, thanks.
jerseymonkey said:
Disabling IGMP on my Verizon FIOS router resolved the issue, thanks.
Click to expand...
Click to collapse
Is that the only change you made? Just changing IGMP Proxy from enabled to disabled? I did that, restarted router and pc but I still don't see the chromecast from the wired connection.
jbaruch76 said:
Is that the only change you made? Just changing IGMP Proxy from enabled to disabled? I did that, restarted router and pc but I still don't see the chromecast from the wired connection.
Click to expand...
Click to collapse
Make sure you are adding the extension to Chrome. I initially downloaded the app and it kept saying I needed to have WiFi turned on. Also make sure in addition to IGMP disabled that you have wireless isolation off.
msm903 said:
When setting it up the first time it does a Wireless to wireless connection from your phone or Wifi Computer to the device. If you don't have Wifi on your computer you will need to use the phone for the initial setup. Once it is on the wireless network you can connect with any device connected to that network, wired or wireless. well that is once your router does not sepereate the wireless and wired clients
Click to expand...
Click to collapse
exactly this
no ethernet
I have the same problem. Chromecast works fine with iPhone and Nexus7 on wifi network. But what I really want is to stream from the Chrome browser on my pc (as advertised!).
I installed the Chromecast extension, but it says no devices found.
I called Google Chromecast support directly, and two people there told me it couldn't be done. Unbelievable. I explained that my non-mobile desktop pc isn’t on a wireless network (why should it be?); it’s on a wired network (faster, more reliable), while all my wireless gadgets are on my wifi network (all from the same router). They say the pc must be on a wi-fi network (the same one as the Chromecast), not a wired network.
I'm hoping some smart guy here has a better answer.
Hey all,
My home internet is crazy slow. I average 1.2 - 1.5 megs down, and that's when everyone is asleep in town! We don't have any other choices, so I wanted to see if I could bridge my X's wifi to my home router. So it would look like this:
Hotspot -> Client Bridge -> Home Network -> Wi-Fi and hardwired devices
I bought a cheap TP-Link WR702N off of Amazon because it said it could operate as a bridge or a client. So I figured I could set the 702N up as a client, have it connect to my X via wi-fi, and then connect the 702N to my home router (Netgear WNDR4500), via the WAN port. Should work in theory, but I can't get my 702N to connect to my X no matter what I try.
I can use my phone's hotspot on my computer, tablet, chromecasts, and so on, but the 702N doesn't work with it. I can get the 702N to act as a client off my WNDR4500, but that's going backwards from what I want to do!
Is there something I'm missing on the X? I've also tried my wife's GS4, and it is also a no-go. I've tried disabling any sort of security on the X, trying 2.4ghz band only, 5ghz band only, restarting, using it as a bridge instead of a client, etc... no dice.
Any suggestions? Suggestions about different hardware that works would also be appreciated!
Thanks, and have a good day!
Hi all,
My first post after reading for a long time.
(Quick question)
Im wondering if anyone has or knows if its not possible to connect an AP or a wifi router to the Turbo through using the USB port?
(Long version)
My family has a condo at the beach and previously to owning my Turbo I used FoxFi full version to broadcast a wifi network for Netflix, my iPad, the Wife's iPad, etc. While not all at once this worked pretty well and saved the expense of purchasing access to the building wifi.
As you all know Foxfi wont work on the Turbo. But supposedly it still works via tether through the usb port. I work in IT so I was thinking, why not connect a driverless OTG so I could patch that to an AP or a older Netgear router that I have. Was thinking I would just plug the patch from the OTG to the "internet" port on the router and let everything connect to that.
While I know this is not a desireable solution, its one that would work for my one situation until someone figures out how to root the Turbo.
Thoughts?
I'm not so sure if that would work but I know PdaNet/foxfi has a feature that turns your laptop into a hotspot. I've tried using it and it's rather hit or miss but I think that's because of my laptop. It would atleast be worth a shot. It's called "wifi share" and can be found in the menu that you use to connect to your phone on your laptop.
IAreFlugruger said:
I'm not so sure if that would work but I know PdaNet/foxfi has a feature that turns your laptop into a hotspot. I've tried using it and it's rather hit or miss but I think that's because of my laptop. It would atleast be worth a shot. It's called "wifi share" and can be found in the menu that you use to connect to your phone on your laptop.
Click to expand...
Click to collapse
Interesting. My theory was more like use a USB to Micro usb adapter to plug into a driverless USB to ethernet adapter. Then plug a patch cable from that into the "internet" port of a home wifi router. After that turn on FoxFi and use it via the USB tethering option.
Again I understand this is not a portable option, nor as simple as turning your phone into an AP at the click of a button. But for my next beach trip this would be pretty handy.
Before I buy the ethernet adapter, does anyone know if the USB tether to the router idea would work?
From what I know for any kind of internet sharing apps such as foxfi, you need the app or program on both the turbo and the receiving device. Those types of apps dont actually share internet to the device directly but through the connected apps. Think of it like cable in your house. You need the modem or receiver to translate the signal to watch it in your house. I would love this to work but I don't think it will.
Sent from my XT1254 using XDA Free mobile app