For those one 5.0, can you change your ring volume? - X 2014 Q&A, Help & Troubleshooting

I can't any more. Its been this way since the update. Every time I try to change my ringer volume it changes my in-call volume, even when I am not in a call. I always have to go to the settings menu to change it.

No issues for me. All volume controls work as they should.

yep im also having no problems with ringer volume. it must just be you sorry bro

My volume works fine except when using Motorola assist it sometimes resets the volume louder.
Sent from my XT1095 using Tapatalk

Related

"speaker problem?" how can i increase the volume?

Hi all ,
there is any chance to increase the volume of the speaker ?
he is very weak.. (and his volume is on maximum)
tweak or smting will help.
thanks !
No tweaks really available for this. There are like one or two tricks (one of which requires hacking your phone up) that apparently work.
Look around, there are tons of threads in regards to this topic.
Yes the speaker is crap on the diamond. Sooner or later you will get used to it and live with it
do not forget that you have three volume settings.
first system volume, second ringtone volume and third incall volume.
the last you can only set during a call. when in a call, turn on your screen and then press the volume up button. now you can change the volume during a call.
for me this fixed al the volume problems.
offcourse if you want to use your speaker for handsfree or as an mp3 player: don't. the speaker is not intended for this use and you will just irritate people around you. use a headphone instead.
Vector-SS said:
No tweaks really available for this. There are like one or two tricks (one of which requires hacking your phone up) that apparently work.
Look around, there are tons of threads in regards to this topic.
Yes the speaker is crap on the diamond. Sooner or later you will get used to it and live with it
Click to expand...
Click to collapse
thanks.
you can direct me to the threads , i didnt found them :\
thanks again
sandervanzijl said:
do not forget that you have three volume settings.
first system volume, second ringtone volume and third incall volume.
the last you can only set during a call. when in a call, turn on your screen and then press the volume up button. now you can change the volume during a call.
Click to expand...
Click to collapse
I also thought that the volume during a call is way too low despite having the volume at maximum. Since I installed Phone Weaver which lets you control the incall volume via profiles it blows my ears away. Last time the speaker was too loud during the call but I couldn't turn it down with the volume keys?! It only changed the master (system?) volume but not the incall. What did I wrong?
I have found that the loud-speaker volume is very low during movie playback, what setting deals with this?
Use Advanced Config and enable all Audio Booster options. This maybe helps...
Also Diamond Tweak, maybe disable 100 db Sound Limitation...
However, these are I think for headset, I haven't tried if they affect the external speaker.
One thing that works for sure is setting equalizers to max in In Core player, but I don't know if the core player works on Diamond...
Don't you love it how I actually haven't helped you at all?
I am gonna test all these and edit this post ))))))
simcarloc said:
I have found that the loud-speaker volume is very low during movie playback, what setting deals with this?
Click to expand...
Click to collapse
Increase the volume of the movie player if its not already 100%?
Personally my speaker is very loud. During calls, at around 50% volume its still so loud I have to keep it a little from my ear.
murks_muell said:
I also thought that the volume during a call is way too low despite having the volume at maximum. Since I installed Phone Weaver which lets you control the incall volume via profiles it blows my ears away. Last time the speaker was too loud during the call but I couldn't turn it down with the volume keys?! It only changed the master (system?) volume but not the incall. What did I wrong?
Click to expand...
Click to collapse
i think you have to be in the phone menu. when i press the volume during a call, it changes the call volume. maybe phone weaver assigns a different function to you volume button.
murklor said:
Increase the volume of the movie player if its not already 100%?
Personally my speaker is very loud. During calls, at around 50% volume its still so loud I have to keep it a little from my ear.
Click to expand...
Click to collapse
Coreplayer shows volume at 100% already, but the volume is so low I can barely hear a thing...
Anyone? It's weird because when I put calls on loudspeaker it's fine, but when playing a movie it's inaudible...
incident said:
thanks.
you can direct me to the threads , i didnt found them :\
thanks again
Click to expand...
Click to collapse
Here you go:
http://forum.xda-developers.com/showthread.php?t=418580&highlight=speaker
http://forum.xda-developers.com/showthread.php?t=408776&highlight=sound
http://forum.xda-developers.com/showthread.php?t=411727&highlight=sound
the solution for your problem is on the following video:
http://www.youtube.com/watch?v=8lJoelghkH8
think carefully before doing this

Ringtone problem

Hi,
I have been having this problem for the last couple of days, for some reason the volume of my ringer has dramatically decreased to the point where i can't hear the phone ring when it's in my pocket (wasn't the case before). When i try to play the ring tone (it's a wave file by the way) using the media player the volume is normal and very loud, the same applies to when i play it from the settings->sounds&notifications the volume on the ring tone is perfect, but when i receive a phone call the ringer volume is cut down by more than half, i checked the ringer volume and it's set to the max, I also did a hard reset then restored my files using the sprint backup but the problem didn't get fixed, I tried using a different ring tones and the same happens. any help would be greatly appreciated.
There are three volume controls: System, Ring and In call Volume.
Have you checked the System Volume?
If you press up on the hard volume key, you'll see arrow on the top right to switch to the next vol control. Check there.
HTH
ringtone problem
yea all 3 volumes are set to the max level
ringtone volume problem
the phone has the original stock rom from rogers (canada) hope this helps in any way
Have you got any profile managers installed (G-profile, Phoneweaver etc)?
ringtone volume problem
no i dont have a profile managers installed... so i just noticed that when the phone start ringing and i dont pick up, a second before the phone stops ringing the volume of the ringtone increases to the normal level (then stops ringing), the increase of the ringtone volume happens for like a split second after the caller hangs up and the phone stops ringing. hope this helps in any way. Thank you
Sounds like you have a Ringtone delay problem, there are a couple of solutions.
1. Disable HTC dialer (and use the Winmo one instead), can be done using Advanced Configurator 3.3.
2. Try the CAB I've attached, remember to only use WAV as ringtone though.
I would also recommend adjusting Call Forwarding timing to 30seconds. Settings/Phone/Services/Call Forwarding and get settings.
Disabling the HTC dialer is probably going to be the best solution as the HTC dialer is a hungry resource eating monster but I would just try the CAB and adjusting Call Forwarding time. There are some other REG setting as well but I never found them useful.

Call Volume Too Loud

Hi I have my call volume set to the minimum, but the call volume is way too loud. The "speaker" is not active, but it is so loud that I have to operate the phone a distance from my ear, and in quiet environments people can easily hear my full conversation.
Does anyone know how I can get that minimum volume to be a little lower.
Using stock ICS, no root, everything standard...
Tesmond said:
Hi I have my call volume set to the minimum, but the call volume is way too loud. The "speaker" is not active, but it is so loud that I have to operate the phone a distance from my ear, and in quiet environments people can easily hear my full conversation.
Does anyone know how I can get that minimum volume to be a little lower.
Using stock ICS, no root, everything standard...
Click to expand...
Click to collapse
Are u sure you're adjusting the call volume (lower volume while on call) and not the system or media volume (adjusted when on home screen or viewing media). Afaik, the lowest call volume setting cannot be heard and is in effect muted.
Sent from my GT-N7000 using xda premium
Try to lower the vol. While calling someone with the help of volume. Up/down buttons
Sent from my GT-N7000 using xda premium
I've always wanted the call volume to be higher on my note - how come you find it loud? have you used a software to increase volume previously?

Link Ringtone and Notification volumes?

Can we not do this like on every other phone I've ever had?
I use the app volume control. No issues at all.
When I use the volume rocker it seems to affect both ringtones and notifications. I think the volume settings are relative.
Here are volumes before adjustment, after backing out to home and turning up with volume rocker. . No sync.
Right, which is why I was saying perhaps they're relative. All I know for sure is, when I use the volume rocker, it affects both notification volume and ringer volume.
impala454 said:
Right, which is why I was saying perhaps they're relative. All I know for sure is, when I use the volume rocker, it affects both notification volume and ringer volume.
Click to expand...
Click to collapse
Which I'm saying I do NOT get that behavior. So, in order to change notification volume, I HAVE to go into settings>volumes and adjust it manually. Pretty damn lame.
I'd like to see something like this:
or
i want rom for alcatel one touch please help.me
dbornack said:
Which I'm saying I do NOT get that behavior. So, in order to change notification volume, I HAVE to go into settings>volumes and adjust it manually. Pretty damn lame.
Click to expand...
Click to collapse
Are you sure the actual volume (i.e. the decibels coming out of your speaker) doesn't change, regardless of what the sliders in the volume app say? I realize the sliders don't necessarily reflect what you might expect, but change the volume, have someone call you, then text, then change the volume again and test again. When I do that, both go up and down as you'd expect.
Just tested. Only the ringer/phone call volume went up. Text stayed very low in volume until I manually went into Settings>Sounds and changed the Notification volume.
I just tested specifically and have to rescind what I said. That's really strange, I could have sworn I'd been changing my text message volume and ringer.
I'd like to bump this up too. Anyone not update to the new Advanced calling firmware yet confirm if this is happening with them too? I am on the new update and just noticed this
huntb said:
I'd like to bump this up too. Anyone not update to the new Advanced calling firmware yet confirm if this is happening with them too? I am on the new update and just noticed this
Click to expand...
Click to collapse
I now have the update but can confirm the same behaviour before the update.
Still doing this on 4.4.4.12 - very annoying.
I only took the day one update, call and notification volumes are NOT linked.

Volume change tone gone in Marshmallow?

Previously, whenever you adjusted the volume, the phone would make a tone to tell you how loud that volume level was, i.e. increasingly louder tones if you were increasing the volume.
I've just noticed that when I change the volume bar, the phone is completely silent (and no, I'm not in Silent or Vibrate mode). Is this a new "feature" of 6.0 or something is wrong with my phone?
kindrich said:
Previously, whenever you adjusted the volume, the phone would make a tone to tell you how loud that volume level was, i.e. increasingly louder tones if you were increasing the volume.
I've just noticed that when I change the volume bar, the phone is completely silent (and no, I'm not in Silent or Vibrate mode). Is this a new "feature" of 6.0 or something is wrong with my phone?
Click to expand...
Click to collapse
well, its not new, as it was in all 3 m releases. and now marshmallow is like that as well.
Thanks! I've never used any of the M Previews so it's good to know this is an expected behavior and not a bug with my device.
kindrich said:
Thanks! I've never used any of the M Previews so it's good to know this is an expected behavior and not a bug with my device.
Click to expand...
Click to collapse
oh gosh, of course

Categories

Resources