I was running a rooted rom and my bootloader is unlocked.
But i wanted to flash the 5.1 ota.
So I was trying to flash the stock image so that I could unroot and flash the 5.1 ota.
I used the Moto X Multitool and used option 4:
flash back to total stock unrooted rom and recovery-full-wipe
How do I flash a rom? It doesn't matter what. I don't want to send it back to Motorola.
Adb is working but fastboot is not working.
EDIT:
I rebooted into the bootloader and flashed TWRP.
Everything is working perfect again
Now I'm stuck in this recovery screen:
Can you get back into the bootloader and did you try doing a factory reset?
Ok, here's the rundown - I have a VZW Moto X (XT1096). I previously ran mofo on it had flashed the 5.1 img files to it and so had 5.1 rooted, but with a locked bootloader. After learning that JCase had gotten sunshine to work on it I unlocked my boot loader. I then decided that because I was worried about having the a kind of mish-mash of systems on it, i.e., 5.0 bootloader (unlocked) with hacked and modded 5.1 system files flashed from mofo, that I wanted to start fresh. I then used the XT1096 flash to stock script and flashed back to 5.0 (there were a bunch of problems and bootloops and force closes, but I am happy to report I am now on a fully stock 5.0 with unlocked BL). Following being stock I have tried to take the OTA but have been unable to do so. When I try it OTA on my device it just sits at 0%. When I tried using MDM it gave me an error message that it failed to install the update - on the device it said getjar: unlocked.
So, now that I am on 5.0 with an unlocked bootloader I am not sure how to proceed with my priorities, Root, WiFi tethering and upgrading to 5.1. My questions are this:
(1) How can I upgrade to 5.1 or does my bootloader unlock preclude that?
(2) How best can I achieve root?
(3) Once I am rooted what do I need to do in order to enable wifi tethering?
Thank you so much!
Okay I can't help with all your issues since I didn't get that problem. It seems like whatever you did to install your phone back to 5.0 it wasn't a clean install or you didn't do a clean data wipe to remove errors, which caused it to not able to receive OTA. I do not believe unlocking bootloader preclude you from receiving OTAs because it worked for me.
1. What you should try to do is download this stock 5.0 firmware package, run the bat file with the latest adb/fastboot, then boot into recovery after that and do a data/cache wipe just to make sure. Then boot in the phone and try to do the OTA again.
2. To get root, I use TWRP recovery to flash SuperSU. This is the standard way in fact.
Download SuperSU.zip and put it in the phone: http://download.chainfire.eu/supersu
Get the latest TWRP image here for the Moto X 2014: https://dl.twrp.me/victara/
Flash the recovery using the command: fastboot flash recovery twrp-2.x.x.x-victara.img
Boot into recovery and flash the SuperSu.zip.
Note that now you have made changes to the recovery and system partition, so in order to receive future OTA updates, you need to use fastboot and flash the stock system.img and recovery.img before doing the update.
3. I don't have experience with Verizon network. I use T-Mobile on this Verizon device and I just enable WiFi Hotspot. In the APN settings, in the "APN type" field, I add the value "dun". And set everything to IPv4.
Okay I can't help with all your issues since I didn't get that problem. It seems like whatever you did to install your phone back to 5.0 it wasn't a clean install or you didn't do a clean data wipe to remove errors, which caused it to not able to receive OTA. I do not believe unlocking bootloader preclude you from receiving OTAs because it worked for me.
1. What you should try to do is download this stock 5.0 firmware package, run the bat file with the latest adb/fastboot, then boot into recovery after that and do a data/cache wipe just to make sure. Then boot in the phone and try to do the OTA again.
2. To get root, I use TWRP recovery to flash SuperSU. This is the standard way in fact.
Download SuperSU.zip and put it in the phone: http://download.chainfire.eu/supersu
Get the latest TWRP image here for the Moto X 2014: https://dl.twrp.me/victara/
Flash the recovery using the command: fastboot flash recovery twrp-2.x.x.x-victara.img
Boot into recovery and flash the SuperSu.zip.
Note that now you have made changes to the recovery and system partition, so in order to receive future OTA updates, you need to use fastboot to flash the stock system.img and recovery.img before doing the update.
Can't help you with tethering since I don't have experience with Verizon network.
eksasol said:
Okay I can't help with all your issues since I didn't get that problem. It seems like whatever you did to install your phone back to 5.0 it wasn't a clean install or you didn't do a clean data wipe to remove errors, which caused it to not able to receive OTA. I do not believe unlocking bootloader preclude you from receiving OTAs because it worked for me.
1. What you should try to do is download this stock 5.0 firmware package, run the bat file with the latest adb/fastboot, then boot into recovery after that and do a data/cache wipe just to make sure. Then boot in the phone and try to do the OTA again.
2. To get root, I use TWRP recovery to flash SuperSU. This is the standard way in fact.
Download SuperSU.zip and put it in the phone: http://download.chainfire.eu/supersu
Get the latest TWRP image here for the Moto X 2014: https://dl.twrp.me/victara/
Flash the recovery using the command: fastboot flash recovery twrp-2.x.x.x-victara.img
Boot into recovery and flash the SuperSu.zip.
Note that now you have made changes to the recovery and system partition, so in order to receive future OTA updates, you need to use fastboot to flash the stock system.img and recovery.img before doing the update.
Can't help you with tethering since I don't have experience with Verizon network.
Click to expand...
Click to collapse
Thank you for the reply - got the update to take and have gotten the device rooted properly.
Now I just need to enable wifi tether - anyone know what is done in the Mofo images that allows it - can i do the same here?
I am interested in this question as well. I am in the exact same boat as the OP, except I am still on a Mofo 5.1 img that is giving me issues. I'd like to flash back to stock and take the OTA. But wifi tether will be a must.
Thanks to mikeoswego we have the tethering answer.
http://forum.xda-developers.com/showthread.php?p=62379151
eksasol said:
Okay I can't help with all your issues since I didn't get that problem. It seems like whatever you did to install your phone back to 5.0 it wasn't a clean install or you didn't do a clean data wipe to remove errors, which caused it to not able to receive OTA. I do not believe unlocking bootloader preclude you from receiving OTAs because it worked for me.
1. What you should try to do is download this stock 5.0 firmware package, run the bat file with the latest adb/fastboot, then boot into recovery after that and do a data/cache wipe just to make sure. Then boot in the phone and try to do the OTA again.
2. To get root, I use TWRP recovery to flash SuperSU. This is the standard way in fact.
Download SuperSU.zip and put it in the phone: http://download.chainfire.eu/supersu
Get the latest TWRP image here for the Moto X 2014: https://dl.twrp.me/victara/
Flash the recovery using the command: fastboot flash recovery twrp-2.x.x.x-victara.img
Boot into recovery and flash the SuperSu.zip.
Note that now you have made changes to the recovery and system partition, so in order to receive future OTA updates, you need to use fastboot to flash the stock system.img and recovery.img before doing the update.
Can't help you with tethering since I don't have experience with Verizon network.
Click to expand...
Click to collapse
I tried this but after I flash TWRP I can't boot to recovery. If I choose recovery from the bootloader it just turns off the phone (charging icon). If I send it adb reboot recovery I get error android "No Command."
Flashed it multiple times, tried mfastboot, no luck. Any ideas?
Edit: I feel dumb. I was using power button to try to select, it's volume up. Good to go.
GatorsUF said:
Thanks to mikeoswego we have the tethering answer.
http://forum.xda-developers.com/showthread.php?p=62379151
Click to expand...
Click to collapse
The other method (the one I used) was to install the Xtether xposed module for the 2013 Moto X - worked perfectly for me.
I feel like a complete noob for asking this in regards to my XT1096, but, how would I get rid of the unlocked bootloader warning message?
SargeStryker said:
I feel like a complete noob for asking this in regards to my XT1096, but, how would I get rid of the unlocked bootloader warning message?
Click to expand...
Click to collapse
Flashing this
http://forum.xda-developers.com/showthread.php?t=2871478
juliospinoza said:
Flashing this
http://forum.xda-developers.com/showthread.php?t=2871478
Click to expand...
Click to collapse
Thanks!
Hi,
I was on 6.0 on XT1095. Tried to root it. Screwed up by flashing something that didn't work. Now i am stuck on 'warning bootloader unlocked' screen. Previously when I was on 5.1 I restored my phone from bootloop by using official images from Moto and using their instructions. Now there are no 6.0 images. I guess trying to reflash the whole 5.1 ijmages would brick my phone. I tried flashing just the system image of 5.1. It didn't work.
I found this 6.0 stock ROM here on XDA http://forum.xda-developers.com/moto-x-2014/development/rom-xt1095-flashable-stock-rom-t3277874 . How do I flash this?
Please help. I'm on stock recovery. Previously I ran commands like 'fastboot flash system x.img' and so on when phone was in fastboot mode. How to flash this zip now.
Thanks in advance.
A bootloop is simple to get out of. Just press and hold the power and volume down keys to boot into recovery and go from there. If your phone isn't booting past the unlocked bootloader warning splash then you need to elaborate on WTF you flashed. Just saying "something that didn't work" isn't sufficient to make an accurate diagnosis.
To flash that stock ROM you posted a link to above would require you to fastboot flash a custom recovery first.
As for restoring a 5.1 image I don't understand why you'd think that would brick your device. You're formatting the entire device by going back to ANY stock image. Just because you are on 6.0 doesn't mean you have to restore a 6.0 stock image (that probably won't be available for some time).
sent from my moto x™
Yesterday I thought I bricked my phone. I too also got stuck on the secure boot error 1003 boot loop. It happened when I tried to relock my bootloader with fastboot oem lock. Can anyone explain why that happened and if, after you obtain root, if it's possible to go back and relock the bootloader. I was attempting to get android pay working again, plus it flashes that message about having an unlocked bootloader. Is it possible to re-lock the bootloader after you have root, and if so, what did I do wrong. I finally restored back to factory using the lg bridge tool and download mode, which was a [email protected]#% to get into with a bootlooping phone.
Thanks in advance.
happimeal said:
Yesterday I thought I bricked my phone. I too also got stuck on the secure boot error 1003 boot loop. It happened when I tried to relock my bootloader with fastboot oem lock. Can anyone explain why that happened and if, after you obtain root, if it's possible to go back and relock the bootloader. I was attempting to get android pay working again, plus it flashes that message about having an unlocked bootloader. Is it possible to re-lock the bootloader after you have root, and if so, what did I do wrong. I finally restored back to factory using the lg bridge tool and download mode, which was a [email protected]#% to get into with a bootlooping phone.
Thanks in advance.
Click to expand...
Click to collapse
To answer your question, when you root the g4 on marshmallow using chainfire's systemless root, It on the fly flashes a different boot image, thus if you relock the bootloader after rooting the device on the 6.0 marshmallow firmware it will end up with the security error because the boot image has been "modified" and a modified image won't be allowed to boot if the bootloader is locked so the answer is unfortunately no you can't have a locked bootloader and have root at the same time, If you want to relock the bootloader on the 6.0 firmware to get rid of the boot image showing "unlocked bootloader" you should flash the KDZ for the 6.0 firmware in this case H81120i firmware and then go into developer settings and uncheck enable oem unlocking and also make sure you boot into fastboot mode, you can do this via the adb shell. another option to not have the "unlocked bootloader" show every boot would be to go back to the 5.1 firmware which did not have this. I hope this helps.
Thank you for a great explanation.
If you ask the people at xposed modules they may be able to do something maybe....
5.1 still displays bootloader unlocked message.
cschmid44 said:
To answer your question, when you root the g4 on marshmallow using chainfire's systemless root, It on the fly flashes a different boot image, thus if you relock the bootloader after rooting the device on the 6.0 marshmallow firmware it will end up with the security error because the boot image has been "modified" and a modified image won't be allowed to boot if the bootloader is locked so the answer is unfortunately no you can't have a locked bootloader and have root at the same time, If you want to relock the bootloader on the 6.0 firmware to get rid of the boot image showing "unlocked bootloader" you should flash the KDZ for the 6.0 firmware in this case H81120i firmware and then go into developer settings and uncheck enable oem unlocking and also make sure you boot into fastboot mode, you can do this via the adb shell. another option to not have the "unlocked bootloader" show every boot would be to go back to the 5.1 firmware which did not have this. I hope this helps.
Click to expand...
Click to collapse
I have installed h815 KDZ files using LGUP. When i reboot it still displays Bootloader unlocked message. I can not use bootloader unlock/lock guide as I have bootloader unlocked.
Any other means to get rid of the message.
bump for way to relock h815
Hello I am working with an XT1060 Developer edition, it is verified to be the xt1060 vie barcodes in The bootloader menu. It has twrp installed and has bootloader unlocked. After trying to flash CM12.1 it is stuck in bootloop. Oddly it appears that my system backup has been deleted. I have tried to flash a firmware zip that is allegedly the vzwxt1060dev edition 4.4.2 and boot animation is different indicating that the OEM ROM did load however the boot loop remains. I did erroneously flash a recovery.IMG onto the boot partition using twrp, however I was under the impression that flashing a new ROM would overwrite this. What is it that I am missing here?
I bootloop mine on a regular basis not having a SD card sucks adb sideload gets me up and going u lose everything