Related
Hello,
I cannot find the download link for HTC One India RUU.
CID: cid_38
I downloaded RUU_M7_UL_JB_50_hTC_Asia_WWE_1.29.707.3_R_Radio_4A.14.3250.13_10.33.1150.01_release_311678_signed.exe from somewhere but it throws 130 - Model ID Error.
Can anyone give me the download link of HTC One Asia India RUU?
HTC one ruu for CID_038
ssrij said:
Hello,
I cannot find the download link for HTC One India RUU.
CID: cid_38
I downloaded RUU_M7_UL_JB_50_hTC_Asia_WWE_1.29.707.3_R_Radio_4A.14.3250.13_10.33.1150.01_release_311678_signed.exe from somewhere but it throws 130 - Model ID Error.
Can anyone give me the download link of HTC One Asia India RUU?
Click to expand...
Click to collapse
I am in a similar situation.. did you find the RUU for your phone? Please help.
Harvey Spectre said:
I am in a similar situation.. did you find the RUU for your phone? Please help.
Click to expand...
Click to collapse
Are you s-off? Then you can flash any RUU you want.
Sent from my iPod touch using Tapatalk
n1234d said:
Are you s-off? Then you can flash any RUU you want.
Sent from my iPod touch using Tapatalk
Click to expand...
Click to collapse
Appreciate the quick response
Don't I need to match my CID and MID with the RUU file? Is there an easy way to turn S-OFF?
Harvey Spectre said:
Appreciate the quick response
Don't I need to match my CID and MID with the RUU file? Is there an easy way to turn S-OFF?
Click to expand...
Click to collapse
Yep, get superCID, Use rumrunner for s-off (rumrunner.us)
Always use the thanks button
ssrij said:
Hello,
I cannot find the download link for HTC One India RUU.
CID: cid_38
I downloaded RUU_M7_UL_JB_50_hTC_Asia_WWE_1.29.707.3_R_Radio_4A.14.3250.13_10.33.1150.01_release_311678_signed.exe from somewhere but it throws 130 - Model ID Error.
Can anyone give me the download link of HTC One Asia India RUU?
Click to expand...
Click to collapse
1. CID_38 isn't a valid CID, it'll start with HTC or with the initials of your carrier so please post your proper, FULL CID, e.g HTC__001
2. There isn't an 'India' RUU - it'll be the Asian model or the EU one
3. Run the command 'fastboot getvar all' and post the results (but remove your IMEI and serial number). We can then see what you actually need
Harvey Spectre said:
I am in a similar situation.. did you find the RUU for your phone? Please help.
Click to expand...
Click to collapse
Not yet, I SOFF'd so I can now load any RUU
EddyOS said:
1. CID_38 isn't a valid CID, it'll start with HTC or with the initials of your carrier so please post your proper, FULL CID, e.g HTC__001
2. There isn't an 'India' RUU - it'll be the Asian model or the EU one
3. Run the command 'fastboot getvar all' and post the results (but remove your IMEI and serial number). We can then see what you actually need
Click to expand...
Click to collapse
It's actually HTC__038
Yeah, it's actually got to be the Asian WWE, and I think it's also the same for the Singapore variant (India is supposed to be x.xx.720.x, but we have x.xx.707.x, the dual-sim variant has a x.xx.720.x)
---------- Post added at 10:10 PM ---------- Previous post was at 09:56 PM ----------
ssrij said:
Not yet, I SOFF'd so I can now load any RUU
Click to expand...
Click to collapse
You need
RUU Zip M7_UL_JB_50_hTC_Asia_WWE_1.29.707.3_R_Radio_4A.14.3250.13_10.33.1150.01_release_311678_signed.zip
Google it. Now that you're s-off, you can restore an older RUU, and then you can take all the OTA's you get, all the way till 4.2.2, and 4.3 when it is released in India.
n1234d said:
It's actually HTC__038
Yeah, it's actually got to be the Asian WWE, and I think it's also the same for the Singapore variant (India is supposed to be x.xx.720.x, but we have x.xx.707.x, the dual-sim variant has a x.xx.720.x)
---------- Post added at 10:10 PM ---------- Previous post was at 09:56 PM ----------
You need
RUU Zip M7_UL_JB_50_hTC_Asia_WWE_1.29.707.3_R_Radio_4A.14.3250.13_10.33.1150.01_release_311678_signed.zip
Google it. Now that you're s-off, you can restore an older RUU, and then you can take all the OTA's you get, all the way till 4.2.2, and 4.3 when it is released in India.
Click to expand...
Click to collapse
Here are my phone details:
version: 0.5
version-bootloader: 1.44.0000
version-baseband: 4A.14.3250.13
version-cpld: None
version-microp: None
version-main: 1.29.707.4
version-misc: PVT SHIP S-ON
serialno:
imei:
meid: 00000000000000
product: m7_u
platform: HBOOT-8064
modelid: PN0711000
cidnum: HTC__038
battery-status: good
battery-voltage: 4197mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
Problem is I tried the steps below and now the phones almost close to being bricked:
- Relocked the phone
- The phone does not have an OS at the moment, but I am able to boot into bootloader and get to fastboot
- Installing the RUU you mentioned has not worked for me somehow. I keep getting an error
Do you think I should root it again and install Clockworkmod? Then somehow install the OS?
Harvey Spectre said:
Here are my phone details:
version: 0.5
version-bootloader: 1.44.0000
version-baseband: 4A.14.3250.13
version-cpld: None
version-microp: None
version-main: 1.29.707.4
version-misc: PVT SHIP S-ON
serialno:
imei:
meid: 00000000000000
product: m7_u
platform: HBOOT-8064
modelid: PN0711000
cidnum: HTC__038
battery-status: good
battery-voltage: 4197mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
Problem is I tried the steps below and now the phones almost close to being bricked:
- Relocked the phone
- The phone does not have an OS at the moment, but I am able to boot into bootloader and get to fastboot
- Installing the RUU you mentioned has not worked for me somehow. I keep getting an error
Do you think I should root it again and install Clockworkmod? Then somehow install the OS?
Click to expand...
Click to collapse
Crap, you're yet s-on. Ok, sure, now that RUU won't work.
Go to fastboot mode and flash twrp recovery from your pc
Use an otg USB cable and flash a rom from your USB drive or side load a rom with twrp.
Post back once you're done.
Sent from my iPod touch using Tapatalk
n1234d said:
Crap, you're yet s-on. Ok, sure, now that RUU won't work.
Go to fastboot mode and flash twrp recovery from your pc
Use an otg USB cable and flash a rom from your USB drive or side load a rom with twrp.
Post back once you're done.
Sent from my iPod touch using Tapatalk
Click to expand...
Click to collapse
Sorry, not sure if I understand this?
"Use an otg USB cable and flash a rom from your USB drive or side load a rom with twrp."
Are you asking me to flash the ruu as is using the command "fastboot flash zip ruu.zip"? or?
Harvey Spectre said:
Sorry, not sure if I understand this?
"Use an otg USB cable and flash a rom from your USB drive or side load a rom with twrp."
Are you asking me to flash the ruu as is using the command "fastboot flash zip ruu.zip"? or?
Click to expand...
Click to collapse
Ooh, my bad. I didn't look at your info correctly.. Here is the RUU you need http://www.htc1guru.com/dld/ruu-zip...0-01_release_312087_signed_2_4_decrypted-zip/
What you need to do is flash this like a normal RUU after relocking your bootloader, if not locked already.
Sorry for complicating it so much in the previous posts
Sent from my iPod touch using Tapatalk
---------- Post added at 12:35 AM ---------- Previous post was at 12:33 AM ----------
And btw the previous RUU was for the OP
Sent from my iPod touch using Tapatalk
---------- Post added at 12:40 AM ---------- Previous post was at 12:35 AM ----------
Refer to this http://www.htc1guru.com/guides/return-stock-guide/
In the section Flashing an RUU zip to flash the zip you download.
Sent from my iPod touch using Tapatalk
n1234d said:
Ooh, my bad. I didn't look at your info correctly.. Here is the RUU you need http://www.htc1guru.com/dld/ruu-zip...0-01_release_312087_signed_2_4_decrypted-zip/
What you need to do is flash this like a normal RUU after relocking your bootloader, if not locked already.
Sorry for complicating it so much in the previous posts
Sent from my iPod touch using Tapatalk
---------- Post added at 12:35 AM ---------- Previous post was at 12:33 AM ----------
And btw the previous RUU was for the OP
Sent from my iPod touch using Tapatalk
---------- Post added at 12:40 AM ---------- Previous post was at 12:35 AM ----------
Refer to this http://www.htc1guru.com/guides/return-stock-guide/
In the section Flashing an RUU zip to flash the zip you download.
Sent from my iPod touch using Tapatalk
Click to expand...
Click to collapse
Haha!! I unlocked my phone again and it got back to the 4.2.2 version that I had on previously. I guess I had not cleared the cache and data on the phone
Next step will be to lock it and then install the RUU that you are referring to
This whole thing is new to me so I guess it is going to take a while and a few more experiments to get it right.
Thanks gain. This really helps
Harvey Spectre said:
Haha!! I unlocked my phone again and it got back to the 4.2.2 version that I had on previously. I guess I had not cleared the cache and data on the phone
Next step will be to lock it and then install the RUU that you are referring to
This whole thing is new to me so I guess it is going to take a while and a few more experiments to get it right.
Thanks gain. This really helps
Click to expand...
Click to collapse
Haha, amazing, you're welcome we all learn new stuff every day
Sent from my iPod touch using Tapatalk
n1234d said:
Haha, amazing, you're welcome we all learn new stuff every day
Sent from my iPod touch using Tapatalk
Click to expand...
Click to collapse
hi bro i am from india and my mobile is noth S-off and Super CID'ed to 111111 now i want to revert back to stock ROM please advice i am running on HBOOT- 2.23.0000
and my mobile is a dual sim indian version
Hi all this my first post and I am desprerately need your help. I have HTC ONE M7 2.24.707.3. My CID is HTC_038 and I have S-OFF. I want to return my phone to service station for repair and I am unable to find any RUU for my phone . Please help me. I am really a newbie so please guide me step by step. Thank You.
Im not going through this again, so read this thread here, this is not for the dual sim version, read it all first, it will guide you, its is for HTC__038 and HTC__044.
http://forum.xda-developers.com/showthread.php?t=2765514
Seanie280672 said:
Im not going through this again, so read this thread here, this is not for the dual sim version, read it all first, it will guide you, its is for HTC__038 and HTC__044.
http://forum.xda-developers.com/showthread.php?t=2765514
Click to expand...
Click to collapse
Thanks for your prompt reply. I forgot to mention that I have TWRP backup and aslo I have used the rooting method given on HTCONEROOT.COM.
That doesn't matter, it will get rid of all of that itself and return your phone to full stock.
Seanie280672 said:
That doesn't matter, it will get rid of all of that itself and return your phone to full stock.
Click to expand...
Click to collapse
I heve read both the thread and now I am currently downloading the 2 RUU's. Will update after I finish.
My htc one is a M7_UL with S-ON
HBOOT-1.56
OS-4.20.708.10
So i have stupidly wiped my device but i can still access the TWRP program
when i flash this RUU (OTA_M7_UL_JB43_SENSE55_MR_hTC_Asia_HK_3.63.708.3-2.24.708.4_release_339322l8015akovncw94nh.zip)
i was given this message:
INFOzip info parsing...
INFORead zipped android_info fail
FAILED (remote: 24 parsing android-info fail)
finished. total time: 64.528s
And obviously i cant get my os to work and im stuck in the 'HTC' startup screen when i reboot
Could any helpful people please show me what im doing wrong thanks
tiger6265 said:
My htc one is a M7_UL with S-ON
HBOOT-1.56
OS-4.20.708.10
So i have stupidly wiped my device but i can still access the TWRP program
when i flash this RUU (OTA_M7_UL_JB43_SENSE55_MR_hTC_Asia_HK_3.63.708.3-2.24.708.4_release_339322l8015akovncw94nh.zip)
i was given this message:
INFOzip info parsing...
INFORead zipped android_info fail
FAILED (remote: 24 parsing android-info fail)
finished. total time: 64.528s
And obviously i cant get my os to work and im stuck in the 'HTC' startup screen when i reboot
Could any helpful people please show me what im doing wrong thanks
Click to expand...
Click to collapse
Post output of fastboot getvar all,( minus imei & serial no )
That also an OTA, cant be flashed on its own
.
bored_stupid said:
Post output of fastboot getvar all,( minus imei & serial no )
That also an OTA, cant be flashed on its own
Click to expand...
Click to collapse
thanks for the reply
INFOversion: 0.5
INFOversion-bootloader: 1.56.0000
INFOversion-baseband: ***********
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 4.20.708.10
INFOversion-misc: PVT SHIP S-ON
INFOserialno:**************
INFOimei: **************
INFOmeid: **************
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0714000
INFOcidnum: HTC__622
INFObattery-status: good
INFObattery-voltage: 4306mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-f6d46eca
INFOhbootpreupdate: 11
INFOgencheckpt: 0
also i would appreciate it if you could explain how i can flash an OTA
Do you have a working rom on the phone, If not the OTA is useless as its just that,( an update to the rom ) and not the full rom.
You need to download the RUU for your phone.
If you do have a working rom then you need to flash the stock recovery for your rom version and relock your bootloader,( your S-On ) to install the update.
bored_stupid said:
Do you have a working rom on the phone, If not the OTA is useless as its just that,( an update to the rom ) and not the full rom.
You need to download the RUU for your phone.
If you do have a working rom then you need to flash the stock recovery for your rom version and relock your bootloader,( your S-On ) to install the update.
Click to expand...
Click to collapse
unfortunately i dont have a working rom on my phone and i cant find an RUU with *.**.708.**
tiger6265 said:
unfortunately i dont have a working rom on my phone and i cant find an RUU with *.**.708.**
Click to expand...
Click to collapse
There is one site that may contain the *.**.708.**. Read here
http://forum.xda-developers.com/showthread.php?t=2725869&highlight=4+20+708+10&page=2
Other than that, I can only suggest a custom stock rom
bored_stupid said:
There is one site that may contain the *.**.708.**. Read here
http://forum.xda-developers.com/showthread.php?t=2725869&highlight=4+20+708+10&page=2
Other than that, I can only suggest a custom stock rom
Click to expand...
Click to collapse
in order for this to work do i need to have s-off?
and can i flash this?
tiger6265 said:
in order for this to work do i need to have s-off?
and can i flash this?
Click to expand...
Click to collapse
I cant answer that But if you can achieve S-Off then you could change your MID & CID in order to flash a alternative RUU
bored_stupid said:
I cant answer that But if you can achieve S-Off then you could change your MID & CID in order to flash a alternative RUU
Click to expand...
Click to collapse
thank you for all your help
bored_stupid said:
I cant answer that But if you can achieve S-Off then you could change your MID & CID in order to flash a alternative RUU
Click to expand...
Click to collapse
one last thing, can you reccommend me a good custom RUU?
tiger6265 said:
one last thing, can you reccommend me a good custom RUU?
Click to expand...
Click to collapse
Sent from my HTC One using Xparent Skyblue Tapatalk 2
ARHD 71.1 is as stock as you will get only better, plus its bang up to date
bored_stupid said:
I cant answer that But if you can achieve S-Off then you could change your MID & CID in order to flash a alternative RUU
Click to expand...
Click to collapse
when i try to install the ruu : RUU_M7_UL_JB_50_S_hTC_Asia_HK_2.24.708.4.zip
i get this message come up :
load_file: could not allocate 1399586263 bytes
im sure this is the correct RUU for my wiped phone but it wont install
tiger6265 said:
when i try to install the ruu : RUU_M7_UL_JB_50_S_hTC_Asia_HK_2.24.708.4.zip
i get this message come up :
load_file: could not allocate 1399586263 bytes
im sure this is the correct RUU for my wiped phone but it wont install
Click to expand...
Click to collapse
can you post a screenshot of your cmd prompt, would like to see what command you are doing excatly. also post a link to the ruu file.
---------- Post added at 03:13 PM ---------- Previous post was at 03:09 PM ----------
tiger6265 said:
when i try to install the ruu : RUU_M7_UL_JB_50_S_hTC_Asia_HK_2.24.708.4.zip
(...)
im sure this is the correct RUU for my wiped phone but it wont install
Click to expand...
Click to collapse
Btw, your phone firmware is currently 4.20.708.10 (from your fastboot getvar all) so you can't use a 2.24.708.4 ruu because its a downgrade and you must have s-off do downgrade.
alray said:
can you post a screenshot of your cmd prompt, would like to see what command you are doing excatly. also post a link to the ruu file.
---------- Post added at 03:13 PM ---------- Previous post was at 03:09 PM ----------
Btw, your phone firmware is currently 4.20.708.10 (from your fastboot getvar all) so you can't use a 2.24.708.4 ruu because its a downgrade and you must have s-off do downgrade.
Click to expand...
Click to collapse
how can i get s-off when i have no operation system
tiger6265 said:
how can i get s-off when i have no operation system
Click to expand...
Click to collapse
you can flash a custom rom and try to s-off the phone. then if you have s-off you will be able to flash almost everything.
still waiting for the screenshot
alray said:
you can flash a custom rom and try to s-off the phone. then if you have s-off you will be able to flash almost everything.
still waiting for the screenshot
Click to expand...
Click to collapse
right i ran it again and its different now and its stuck :/
as its a hong kong one its chinese http://pan.baidu.com/share/link?shareid=1432675332&uk=587915873
alray said:
you can flash a custom rom and try to s-off the phone. then if you have s-off you will be able to flash almost everything.
still waiting for the screenshot
Click to expand...
Click to collapse
do i have to relock my bootloader before flashing the custom stock that bored_stupid recomended (http://android-revolution-hd.blogspot.co.uk/p/android-revolution-hd-mirror-site-var.html)
this is when i used the custom stock:
http://gyazo.com/0036d2f32816f341199575c7baf43b3b
tiger6265 said:
right i ran it again and its different now and its stuck :/
as its a hong kong one its chinese http://pan.baidu.com/share/link?shareid=1432675332&uk=587915873
Click to expand...
Click to collapse
like i said above (post 13), you can't use this ruu because its a downgrade. S-OFF is required to downgrade so any RUU below your version (4.20.708.10) will not work. So trying to flash them = wasting your time.
---------- Post added at 05:55 PM ---------- Previous post was at 05:55 PM ----------
tiger6265 said:
do i have to relock my bootloader before flashing the custom stock that bored_stupid recomended (http://android-revolution-hd.blogspot.co.uk/p/android-revolution-hd-mirror-site-var.html)
Click to expand...
Click to collapse
this is a rom and you have to install it from custom recovery, no need to relock bootloader.
adb push or sideload it to your sdcard, then install it from twrp
alray said:
like i said above (post 13), you can't use this ruu because its a downgrade. S-OFF is required to downgrade so any RUU below your version (4.20.708.10) will not work. So trying to flash them = wasting your time.
---------- Post added at 05:55 PM ---------- Previous post was at 05:55 PM ----------
this is a rom and you have to install it from custom recovery, no need to relock bootloader
Click to expand...
Click to collapse
okay thanks, i dont know how to get the rom on my phone in the first place :s im not sure if i should go through the process of using ADB side loader
anyway im going to sleep now
tiger6265 said:
okay thanks, i dont know how to get the rom on my phone in the first place :s im not sure if i should go through the process of using ADB side loader
anyway im going to sleep now
Click to expand...
Click to collapse
ok
just post here when you'll be ready, I can assist you to ''adb push'' the rom to your phone, its quite easy to do.
Hey Guys,
I am pulling my hair out trying to return my HTC one M7 back to stock. Selling it to a friend that knows nothing about rooting and is not tech savy.
Anyways I cant seem to get the RUU to do. I have the correct file (I am with Rogers in Canada) that is the most up to date (see pictures).
I keep getting the Error 158 Image Error when I run the setup.
My phone is Locked as well which i know is the main cause for this error.
I am also running HD Revolution 84.0 at the moment.
I also set the CID to 11111111, hoping this might fix it but no luck
Any help is most appreciated.
FowlMouthedDuck said:
Hey Guys,
I am pulling my hair out trying to return my HTC one M7 back to stock. Selling it to a friend that knows nothing about rooting and is not tech savy.
Anyways I cant seem to get the RUU to do. I have the correct file (I am with Rogers in Canada) that is the most up to date (see pictures).
I keep getting the Error 158 Image Error when I run the setup.
My phone is Locked as well which i know is the main cause for this error.
I am also running HD Revolution 84.0 at the moment.
I also set the CID to 11111111, hoping this might fix it but no luck
Any help is most appreciated.
Click to expand...
Click to collapse
I should also note I am running TWRP v2.8.4.0
FowlMouthedDuck said:
I should also note I am running TWRP v2.8.4.0
Click to expand...
Click to collapse
post your fastboot getvar all please without imei and serial number please.
Seanie280672 said:
post your fastboot getvar all please without imei and serial number please.
Click to expand...
Click to collapse
version: 0.5
version-bootloader: 1.44.0000
version-baseband: 4A.20.3263.16
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-OFF
serialno:
imei:
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0712000
cidnum: 11111111
battery-status: good
battery-voltage: 4256mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
FowlMouthedDuck said:
version: 0.5
version-bootloader: 1.44.0000
version-baseband: 4A.20.3263.16
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-OFF
serialno:
imei:
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0712000
cidnum: 11111111
battery-status: good
battery-voltage: 4256mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
Click to expand...
Click to collapse
Ok never mind, version main is missing, I suggest you find the firmware and flash that first then whilst still in the bootloader with fastboot USB on the screen, run the RUU
Seanie280672 said:
Ok never mind, version main is missing, I suggest you find the firmware and flash that first then whilst still in the bootloader with fastboot USB on the screen, run the RUU
Click to expand...
Click to collapse
Where is the best spot to download the firmware?
FowlMouthedDuck said:
Where is the best spot to download the firmware?
Click to expand...
Click to collapse
you should be able to pull it from the ruu, when you start the ruu and it extracts itself, make sure your computer is showing hidden files and folders then goto C:\users\(your user name)\app data\ local\(lots of strange characters and numbers folder) before closing the RUU and copy the firmware to a different location on your computer.
However, also as your s-off, you are aware you can flash any RUU like the 401 (WWE) or developer edition, its all stock.
Seanie280672 said:
you should be able to pull it from the ruu, when you start the ruu and it extracts itself, make sure your computer is showing hidden files and folders then goto C:\users\(your user name)\app data\ local\(lots of strange characters and numbers folder) before closing the RUU and copy the firmware to a different location on your computer.
However, also as your s-off, you are aware you can flash any RUU like the 401 (WWE) or developer edition, its all stock.
Click to expand...
Click to collapse
1. Is it in the Temp folder?
2. if It flash one of those RUU's, can I still update to Lollipop when it is available?
FowlMouthedDuck said:
Where is the best spot to download the firmware?
Click to expand...
Click to collapse
Your hboot 1.44 means the firmware has never been updated or did you put that their returning to stock ?
Maybe try an older RUU like >> http://forum.xda-developers.com/showthread.php?t=2529225
FowlMouthedDuck said:
1. Is it in the Temp folder?
2. if It flash one of those RUU's, can I still update to Lollipop when it is available?
Click to expand...
Click to collapse
Yup, dev edition will be the first to get it too.
Seanie280672 said:
Yup, dev edition will be the first to get it too.
Click to expand...
Click to collapse
Is it the Rom.zip file? When I tried to copy to the phone in windows 7 to the phone, it just gives me a "Cannot copy item" msg. The device has either stopped responding or has been disconnected.
I am thinking maybe the dev edition might be the best bet because my friend might be switching to another carrier instead of Rogers
FowlMouthedDuck said:
Is it the Rom.zip file? When I tried to copy to the phone in windows 7 to the phone, it just gives me a "Cannot copy item" msg. The device has either stopped responding or has been disconnected.
I am thinking maybe the dev edition might be the best bet because my friend might be switching to another carrier instead of Rogers
Click to expand...
Click to collapse
then try here >> http://forum.xda-developers.com/showpost.php?p=58087799&postcount=11
theirs also a RUU here 6.07.1540.2 >> http://dl3.htc.com/application/RUU_...4_10.33E.1718.01L_release_404528_signed_2.exe
Also their is no Firmware.zip in a RUU their found in OTA update packages
clsA said:
then try here >> http://forum.xda-developers.com/showpost.php?p=58087799&postcount=11
theirs also a RUU here 6.07.1540.2 >> http://dl3.htc.com/application/RUU_...4_10.33E.1718.01L_release_404528_signed_2.exe
Click to expand...
Click to collapse
Will this still allow the phone to be unlocked and switched to another carrier here in Canada? (ex. rogers to telus).
FowlMouthedDuck said:
Is it the Rom.zip file? When I tried to copy to the phone in windows 7 to the phone, it just gives me a "Cannot copy item" msg. The device has either stopped responding or has been disconnected.
I am thinking maybe the dev edition might be the best bet because my friend might be switching to another carrier instead of Rogers
Click to expand...
Click to collapse
well if you go to dev edition be sure to note clsA link incase of any problems and you have to return it to Rogers.
also need to know if you backflashed your HBOOT to 1.44 yourself ?
---------- Post added at 09:51 PM ---------- Previous post was at 09:45 PM ----------
clsA said:
then try here >> http://forum.xda-developers.com/showpost.php?p=58087799&postcount=11
theirs also a RUU here 6.07.1540.2 >> http://dl3.htc.com/application/RUU_...4_10.33E.1718.01L_release_404528_signed_2.exe
Also their is no Firmware.zip in a RUU their found in OTA update packages
Click to expand...
Click to collapse
sorry missed this, thanks :good:
Seanie280672 said:
well if you go to dev edition be sure to note clsA link incase of any problems and you have to return it to Rogers.
also need to know if you backflashed your HBOOT to 1.44 yourself ?
---------- Post added at 09:51 PM ---------- Previous post was at 09:45 PM ----------
sorry missed this, thanks :good:
Click to expand...
Click to collapse
Can to simply take the firmware from the OTA? If so, do I install the .zip like any ROM? Because I am trying to do that and as soon as I hit install in TWRP, it just reboots the recovery.
And yes I did backflash the HBOOT. I believe i had to do it when I had the lastest Viperone rom installed.
FowlMouthedDuck said:
Can to simply take the firmware from the OTA? If so, do I install the .zip like any ROM? Because I am trying to do that and as soon as I hit install in TWRP, it just reboots the recovery.
And yes I did backflash the HBOOT. I believe i had to do it when I had the lastest Viperone rom installed.
Click to expand...
Click to collapse
Disregard my last post. I forgot you had to use fastboot to update firmware. So I used the firmware.zip from the OTA. Now after rebooting, i get no display. I still have my usb plugged in and I can hear windows connecting and disconnecting but nothing is happening when I hold down power
FowlMouthedDuck said:
Disregard my last post. I forgot you had to use fastboot to update firmware. So I used the firmware.zip from the OTA. Now after rebooting, i get no display. I still have my usb plugged in and I can hear windows connecting and disconnecting but nothing is happening when I hold down power
Click to expand...
Click to collapse
Crap .. what firmware did you flash ?? and you never answered how did you get to hboot 1.44
you have to flash those OTA firmware.zip in order 3.x to 4.x to 5.x to 6.x ... you cant just jump to the newest firmware
when you plug in your phone check device manager for QHSUSB_DLOAD
Oops I forgot to finish my post. I did downflash the hboot when I downloaded the latest viperone rom (i think it asked me to if I remember correctly).
So device manager has QHUSB_DLOAD, what should i do with it?
Sorry for all the headaches. I am still a little new to the firmware stuff and going back to stock
FowlMouthedDuck said:
Oops I forgot to finish my post. I did downflash the hboot when I downloaded the latest viperone rom (i think it asked me to if I remember correctly).
So device manager has QHUSB_DLOAD, what should i do with it?
Sorry for all the headaches. I am still a little new to the firmware stuff and going back to stock
Click to expand...
Click to collapse
Yeah that sucks .. hope you can make this work
http://forum.xda-developers.com/showthread.php?t=2770684
FowlMouthedDuck said:
So I used the firmware.zip from the OTA.
Click to expand...
Click to collapse
you should be able to pull it from the ruu
Click to expand...
Click to collapse
he said, not from an ota. Ota fimware are only patches and must be flashed incrementally like clsA said.
So device manager has QHUSB_DLOAD, what should i do with it?
Click to expand...
Click to collapse
Looks like you make the situation worse. you could have avoided that by following what they said... :angel:
Now follow this guide: http://forum.xda-developers.com/showthread.php?t=2770684
Hi guys.
I really trust xda forums and that's why I come here whenever I need help. You always save the day guys and I want to thank you for that.
So a while ago I've unlocked the boot loader, flashed cwm recovery via fast boot and rooted my device. I'm still on a stock Rom though.
Now I want to upgrade to lollipop manually, my plan is to download the official Rom from HTC's website connect my device to the pc with a usb cable then install it on my phone.. From what I understand I should flash back the stock recovery then relock the boot loader and restore the contents of a folder (i don't remember what folder though). Where can I find the stock Rom img file I should flash? (And the folder contents that i'm supposed to restore) also if I relock the boot loader will the upgrade proceed if it still shows "tampered"?
Please guys help what am I supposed to do before upgrading??
monrokhoury said:
Hi guys.
I really trust xda forums and that's why I come here whenever I need help. You ashtrays save the day guys and I want to thank you for that.
So a while ago I've unlocked the boot loader, flashed cwm recovery via fast boot and rooted my device. I'm still on a stock Rom though.
Now I want to upgrade to lollipop manually, my plan is to download the official Rom from HTC's website connect my device to the pc with a usb cable then install it on my phone.. From what I understand I should flash back the stock recovery then relock the boot loader and restore the contents of a folder (i don't remember what folder though). Where can I find the stock Rom img file I should flash? (And the folder contents that i'm supposed to restore) also if I relock the boot loader will the upgrade proceed if it still shows "tampered"?
Please guys help what am I supposed to do before upgrading??
Click to expand...
Click to collapse
You need to restore the preload data. This gets wiped when you unlock the bootloader and it will cause the OTA to fail. Relocking isn't necessary for installing ota's you just need Stock Rom and Recovery. A GuruReset is usually the way to go.
If your talking about flashing the RUU then you will need to relock the bootloader if your s-on but that's it. Missing preload data, rooted rom's and custom recovery will not effect the RUU install. It will just flash stock over the top of it all. Your phone will be wiped though so backup any data you want to keep. :good:
If you need more help finding the correct software post the output of
Code:
fastboot getvar all
Please remove your imei and serial number before posting
Danny201281 said:
You need to restore the preload data. This gets wiped when you unlock the bootloader and it will cause the OTA to fail. Relocking isn't necessary for installing ota's you just need Stock Rom and Recovery. A GuruReset is usually the way to go.
If your talking about flashing the RUU then you will need to relock the bootloader if your s-on but that's it. Missing preload data, rooted rom's and custom recovery will not effect the RUU install. It will just flash stock over the top of it all. Your phone will be wiped though so backup any data you want to keep. :good:
If you need more help finding the correct software post the output of
Code:
fastboot getvar all
Please remove your imei and serial number before posting
Click to expand...
Click to collapse
done, here's what that returned:
D:\Program Files\Android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.28.3218.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.09.401.111
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 4306mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode:y SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.071s
thanks for helping me find the software. I need to know how to restore the preloade data. I know how to flash the stock recovery but I don't have it. I gotta admit btw that I don't know what ruu is.
monrokhoury said:
done, here's what that returned:
D:\Program Files\Android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.28.3218.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.09.401.111
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 4306mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode:y SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.071s
thanks for helping me find the software. I need to know how to restore the preloade data. I know how to flash the stock recovery but I don't have it. I gotta admit btw that I don't know what ruu is.
Click to expand...
Click to collapse
Ok thanks you don't need to worry about an RUU because there isn't one for your Device.
Do you know how to use a nandroid backup? There is a Stock TWRP nandroid and the recovery you need in this thread here http://forum.xda-developers.com/htc-one/development/backup-100-stock-6-09-401-111-twrp-t2992871 :good: you can use this to restore your Device back so you can get OTA updates
Danny201281 said:
Ok thanks you don't need to worry about an RUU because there isn't one for your Device.
Do you know how to use a nandroid backup? There is a Stock TWRP nandroid and the recovery you need in this thread here http://forum.xda-developers.com/htc-one/development/backup-100-stock-6-09-401-111-twrp-t2992871 :good: you can use this to restore your Device back so you can get OTA updates
Click to expand...
Click to collapse
I have cwm recovery on my phone, can I use it to flash the nanodroid backup? or do I have to flash twrp recovery?
and after flashing the nanodroid backup I just have to flash the stock recovery and then upgrade?
which one is the nanodroid backup I need to flash? is it this one:
" TWRP Backup: https://yadi.sk/d/rQzZ9i0CdmstQ "
or this:
"6.09.401.111 Firmware with Hboot 1.57.000 https://yadi.sk/d/n7BAQ8vpdqPSS "
??
and do I need to worry about the radio file in your link?
thanxx for your help man!
Sorry for bothering you too much but I've been thinking, wouldn't it be easier to restore the preloaded data instead of downloading and flashing the backup? Is that possible??
Thanx man
monrokhoury said:
Sorry for bothering you too much but I've been thinking, wouldn't it be easier to restore the preloaded data instead of downloading and flashing the backup? Is that possible??
Thanx man
Click to expand...
Click to collapse
If you can find a download for just the preload data then yes that would be easier. I'll see if I can find something.
Otherwise you want the TWRP backup from that thread and you will need to flash TWRP recovery to restore it. And just to clarify you can't flash the nandroid backup like a normal Rom. You will need to unzip it and copy the folder in to your TWRP backups folder then use the restore option in twrp
The radio file is not such a big issue it will be the same radio you already have anyway.
---------- Post added at 10:35 PM ---------- Previous post was at 10:24 PM ----------
monrokhoury said:
Sorry for bothering you too much but I've been thinking, wouldn't it be easier to restore the preloaded data instead of downloading and flashing the backup? Is that possible??
Thanx man
Click to expand...
Click to collapse
Preload data this is the closest I can find. It may or may not work so try at your own risk.
http://goo.gl/XvLuE0
This is the preload data from 6.09.401.12 which is the lte version of your Device. The preload data may well be the same as the only difference is that 1 device has lte enabled and the other (your Device does not) :good:
Danny201281 said:
If you can find a download for just the preload data then yes that would be easier. I'll see if I can find something.
Otherwise you want the TWRP backup from that thread and you will need to flash TWRP recovery to restore it. And just to clarify you can't flash the nandroid backup like a normal Rom. You will need to unzip it and copy the folder in to your TWRP backups folder then use the restore option in twrp
The radio file is not such a big issue it will be the same radio you already have anyway.
---------- Post added at 10:35 PM ---------- Previous post was at 10:24 PM ----------
Preload data this is the closest I can find. It may or may not work so try at your own risk.
http://goo.gl/XvLuE0
This is the preload data from 6.09.401.12 which is the lte version of your Device. The preload data may well be the same as the only difference is that 1 device has lte enabled and the other (your Device does not) :good:
Click to expand...
Click to collapse
Man, you're the best
monrokhoury said:
Man, you're the best
Click to expand...
Click to collapse
There is no data / preload folder in the backup either, are you sure you need it for this particular device ?
you can download the TWRP backup and extract it then open each individual file, like the system file with winrar, like ive done, this is the system folder from the backup, (see pict below)
Seanie280672 said:
There is no data / preload folder in the backup either, are you sure you need it for this particular device ?
you can download the TWRP backup and extract it then open each individual file, like the system file with winrar, like ive done, this is the system folder from the backup, (see pict below)
Click to expand...
Click to collapse
so this backup won't allow me to restore the preload contents? is there anyway to restore it? or should I forget about ota updates?
monrokhoury said:
so this backup won't allow me to restore the preload contents? is there anyway to restore it? or should I forget about ota updates?
Click to expand...
Click to collapse
no this backup doesnt appear to contain the data/preload contents, but thats why I said have you tried to update ?, is the update available to you yet ? maybe the M7_U is different to the UL and doesnt require this folder, or you could try as Danny stated earlier and use the UL ones he linked you too. :good:
Seanie280672 said:
no this backup doesnt appear to contain the data/preload contents, but thats why I said have you tried to update ?, is the update available to you yet ? maybe the M7_U is different to the UL and doesnt require this folder, or you could try as Danny stated earlier and use the UL ones he linked you too. :good:
Click to expand...
Click to collapse
I want to update manually by downloading the update file from HTC's website and then following these instructions to upgrade:
Performing the ROM Update:
1. Download and save the HTC One™ ROM update to your PC.
2. Connect your device to your PC via the supplied USB cable.
3. If the device is not recognized by the PC, ensure you have HTC Sync Manager installed and then disconnect and reconnect the device from the USB cable.
4. Once the device is properly recognized on the PC, locate the HTC One™ ROM update that you downloaded. Double-click on the file to launch the system update wizard.
5. Follow all of the system update wizard instructions shown on your PC.
6. Once the update is complete, click Finish in the Wizard and the device will reboot.
7. Once the device reboots, the initial setup wizard will appear.
8. Once the initial setup process is complete, the device is ready for use.
I found them here.
Danny said that manually restoring the contents might not work.. if I restore them and then try upgrading can it brick the phone? and how can I restore them anyway?
thaaaanx
monrokhoury said:
I want to update manually by downloading the update file from HTC's website and then following these instructions to upgrade:
Danny said that manually restoring the contents might not work.. if I restore them and then try upgrading can it brick the phone? and how can I restore them anyway?
thaaaanx
Click to expand...
Click to collapse
Not too sure about restoring the contents manually, I have done it myself before, but on a different HTC One SV a couple of years ago in order to update, but I did have a hell of a game doing it, even came down to creating the data and preload folders in system on my phone myself andf setting the correct premissions and then placing each file in there manually, I really wouldnt like to say if it would work for your device or not.
On a different note, which update files have you found, could you supply a link please, and I thought you had to be s-off to manually update regardless ?
Seanie280672 said:
Not too sure about restoring the contents manually, I have done it myself before, but on a different HTC One SV a couple of years ago in order to update, but I did have a hell of a game doing it, even came down to creating the data and preload folders in system on my phone myself andf setting the correct premissions and then placing each file in there manually, I really wouldnt like to say if it would work for your device or not.
On a different note, which update files have you found, could you supply a link please, and I thought you had to be s-off to manually update regardless ?
Click to expand...
Click to collapse
no you don't need to s-off cause you'll be updating using HTC sync manager.
here's a link:
http://www.htc.com/us/support/rom-downloads.html
let's say I'm considering flashing maximushd Rom, I have flashed twrp recovery 2.8.4.0, now I just have to do a full wipe using it and then flash the Rom?
monrokhoury said:
no you don't need to s-off cause you'll be updating using HTC sync manager.
here's a link:
http://www.htc.com/us/support/rom-downloads.html
let's say I'm considering flashing maximushd Rom, I have flashed twrp recovery 2.8.4.0, now I just have to do a full wipe using it and then flash the Rom?
Click to expand...
Click to collapse
There is no lollipop update on that page for your phone, only the dev edition M7, but yes to MHD Rom, and if you get s-off you can flash the matching firmware too.
Seanie280672 said:
There is no lollipop update on that page for your phone, only the dev edition M7, but yes to MHD Rom, and if you get s-off you can flash the matching firmware too.
Click to expand...
Click to collapse
" Unlocked/Developer
Device Name Latest ROM # Details and Instructions Link
HTC One (M8) 4.16.1540.8
View
Download
HTC One 7.17.1540.7
View
Download
HTC One max 3.23.1540.1 N/A
Download"
mine is an unlocked m7.
is switching s-off and flashing the firmware a must? bc some members told me that they just flashed the Rom using twrp recovery and everything went fine.. do you confirm?
monrokhoury said:
" Unlocked/Developer
Device Name Latest ROM # Details and Instructions Link
HTC One (M8) 4.16.1540.8
View
Download
HTC One 7.17.1540.7
View
Download
HTC One max 3.23.1540.1 N/A
Download"
mine is an unlocked m7.
is switching s-off and flashing the firmware a must? bc some members told me that they just flashed the Rom using twrp recovery and everything went fine.. do you confirm?
Click to expand...
Click to collapse
No flashing the firmware isn't required, although it's recommended, you should be ok just to flash the Rom, it's just the same as flashing a custom Rom.
As for unlocked its a different type of unlocked, confusing I know, yours is just network unlocked, that ruu / ota is dev edition, unlocked bootloader and s-off unlocked from the factory, have a look at the version number, the 3rd set of digits is what matters, that's 1540 dev, your output on page 1 states 401 international edition.
Seanie280672 said:
No flashing the firmware isn't required, although it's recommended, you should be ok just to flash the Rom, it's just the same as flashing a custom Rom.
As for unlocked its a different type of unlocked, confusing I know, yours is just network unlocked, that ruu / ota is dev edition, unlocked bootloader and s-off unlocked from the factory, have a look at the version number, the 3rd set of digits is what matters, that's 1540 dev, your output on page 1 states 401 international edition.
Click to expand...
Click to collapse
thanks for explaining that man you're amazing you saved me a lot of time.. I guess I'll download and flash mhd though I gotta ask, why is flashing the firmware recommended?
and is mhd a good Rom in your opinion?
Anyway I made a full nanodroid backup using twrp so that I can roll back if I don't like the results.. that'll work right?
thaaaaanx again
monrokhoury said:
thanks for explaining that man you're amazing you saved me a lot of time.. I guess I'll download and flash mhd though I gotta ask, why is flashing the firmware recommended?
and is mhd a good Rom in your opinion?
Anyway I made a full nanodroid backup using twrp so that I can roll back if I don't like the results.. that'll work right?
thaaaaanx again
Click to expand...
Click to collapse
Nandroid is always recommended and a good idea, I use mhd myself, they are all very much the same at the moment to be honest, the differences between them are very minimal, and matching firmware to the Rom version is always recommended to save a potential problems.
---------- Post added at 09:35 AM ---------- Previous post was at 09:26 AM ----------
Just to add, when the official SIGNED - (that's important) 401 firmware comes out and is available you will be able to flash that, at the moment it's unsigned and will brick your phone. You'll just need to relock your boot loader first as your s-on, then flash it like any other firmware, then re-unlock your bootloader and reflash a custom recovery.
Seanie280672 said:
Nandroid is always recommended and a good idea, I use mhd myself, they are all very much the same at the moment to be honest, the differences between them are very minimal, and matching firmware to the Rom version is always recommended to save a potential problems.
---------- Post added at 09:35 AM ---------- Previous post was at 09:26 AM ----------
Just to add, when the official SIGNED - (that's important) 401 firmware comes out and is available you will be able to flash that, at the moment it's unsigned and will brick your phone. You'll just need to relock your boot loader first as your s-on, then flash it like any other firmware, then re-unlock your bootloader and reflash a custom recovery.
Click to expand...
Click to collapse
I hear you, abd I won't need to restore the preload contents that got quoted when I unlocked the boot loader?
The Story
So a few days ago I decided I wanted to try rooting my phone despite not really knowing much about the process.
First I unlocked my bootloader, simple enough right? Even managed to change my recovery to twrp and it worked fine.
Being naive I decided to tried to root the phone by installing supersu using twrp. I placed a zip file on my phone and attempted to flash using twrp
Long be hold my phone was still booting but then I tried to update the version of supersu because it was not working. This is when the problems started.
A tampered flag appear in my bootloader which of course is because I was not S-OFF! (Did not know what that was at the time)
So now my phone appears to be bricked and I can no longer boot into the OS
After much research and trying out different solutions, nothing appears to work.
From what I have gathered the only thing I can do is to restore the stock image. That would be fine if it were possible to find!
Not sure how accurate this is but I have read that RUUs do not work if you are S-ON.
Please someone help me...Not having a phone for 2 days now is a bummer!
EDIT :adb and fastboot are installed and working. Though adb seems to only work when I am in recovery
UPDATE: So as suggested by alray I updated the supersu to newest version and my phone now boots!
Thank you to all who responded!
donking233 said:
The Story
So a few days ago I decided I wanted to try rooting my phone despite not really knowing much about the process.
First I unlocked my bootloader, simple enough right? Even managed to change my recovery to twrp and it worked fine.
Being naive I decided to tried to root the phone by installing supersu using twrp. I placed a zip file on my phone and attempted to flash using twrp
Click to expand...
Click to collapse
What version of twrp and what version of supersu?
Long be hold my phone was still booting but then I tried to update the version of supersu
Click to expand...
Click to collapse
What version of supersu?
From what I have gathered the only thing I can do is to restore the stock image. That would be fine if it were possible to find!
Click to expand...
Click to collapse
post the output of "fastboot getvar all"
Not sure how accurate this is but I have read that RUUs do not work if you are S-ON.
Click to expand...
Click to collapse
RUU works with s-on, you only need s-off if the ruu you want to use is a downgrade.
alray said:
What version of twrp and what version of supersu?
What version of supersu?
post the output of "fastboot getvar all"
RUU works with s-on, you only need s-off if the ruu you want to use is a downgrade.
Click to expand...
Click to collapse
Here is all the info
version: 0.5
version-bootloader: 1.61.0000
version-baseband: 4T.35.3218.16
version-cpld: None
version-microp: None
version-main: 7.17.631.7
version-misc: PVT SHIP S-ON
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0712000
cidnum: ROGER001
battery-status: good
battery-voltage: 4320mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-eff4f609
hbootpreupdate: 11
gencheckpt: 0
For twrp I installed the latest version 2.8.7.0-m7
SuperSu intialled was v1.30 but I tried to update to v1.65 and thats when everything went wrong.
Thanks I really appreciate the help!
donking233 said:
Here is all the info
version: 0.5
version-bootloader: 1.61.0000
version-baseband: 4T.35.3218.16
version-cpld: None
version-microp: None
version-main: 7.17.631.7
version-misc: PVT SHIP S-ON
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0712000
cidnum: ROGER001
battery-status: good
battery-voltage: 4320mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-eff4f609
hbootpreupdate: 11
gencheckpt: 0
For twrp I installed the latest version 2.8.7.0-m7
SuperSu intialled was v1.30 but I tried to update to v1.65 and thats when everything went wrong.
Thanks I really appreciate the help!
Click to expand...
Click to collapse
Whoa both supersu version are really outdated. You must use 2.46 on lollipop so boot in your recovery and flash 2.46 and if your phone still refuse to boot we will help you relfash the rom.
Sorry, forgot to say, don't post your IMEI, remove it from your above post.
Should blank out your serial and imei on the forum
Sent from my HTC One using XDA Premium HD app
alray said:
Whoa both supersu version are really outdated. You must use 2.46 on lollipop so boot in your recovery and flash 2.46 and if your phone still refuse to boot we will help you relfash the rom.
Sorry, forgot to say, don't post your IMEI, remove it from your above post.
Click to expand...
Click to collapse
Sieze said:
Should blank out your serial and imei on the forum
Sent from my HTC One using XDA Premium HD app
Click to expand...
Click to collapse
Thanks just removed them
Just curious why exactly is it a bad idea to post the imei and serial?
OK I will reply with the results of updating the superSU
This is actually quite weird but I have the exact same problem as you and seem to have the same MID and CID as you aswell.
I also happened to get the SuperSU 1.30 which didn't work (it kept crashing on me). I then updated it to 2.46 but then the phone stopped booting. I was just about to create a thread to ask for help but then I saw this, haha.
Edit: Would downloading a Nandroid restore from guru's stock nandroid backups work? (can't post link) I've downloaded the TWRP ROGER001 backup, extracted all the files into a folder in TWRP (which is visible to "Restore" on TWRP) but I'm not sure whether I should do it.
TheWijiBoard said:
This is actually quite weird but I have the exact same problem as you and seem to have the same MID and CID as you aswell.
I also happened to get the SuperSU 1.30 which didn't work (it kept crashing on me). I then updated it to 2.46 but then the phone stopped booting. I was just about to create a thread to ask for help but then I saw this, haha.
Edit: Would downloading a Nandroid restore from guru's stock nandroid backups work? (can't post link) I've downloaded the TWRP ROGER001 backup, extracted all the files into a folder in TWRP (which is visible to "Restore" on TWRP) but I'm not sure whether I should do it.
Click to expand...
Click to collapse
What is your version and what is the nandroid backup version?
TheWijiBoard said:
Edit: Would downloading a Nandroid restore from guru's stock nandroid backups work? (can't post link) I've downloaded the TWRP ROGER001 backup, extracted all the files into a folder in TWRP (which is visible to "Restore" on TWRP) but I'm not sure whether I should do it.
Click to expand...
Click to collapse
Just tried this; it did work and I've been reverted to Android 4.3 but my phone actually boots.
Edit: Whoops. Turns out this is a bad idea.
donking233 said:
Thanks just removed them
Just curious why exactly is it a bad idea to post the imei and serial?
OK I will reply with the results of updating the superSU
Click to expand...
Click to collapse
because the IMEI is a unique number identifying your phone, each phone have its own unique IMEI number. Lets say you loose your phone, you will call your carrier to declare your phone lost/stolen, they will blacklist your IMEI number so the phone can't be activated anymore on any GSM network.
Also your IMEI number could be used with other information like your sim card number / serial to clone your phone.
Its like sharing your social security number
alray said:
What is your version and what is the nandroid backup version?
Click to expand...
Click to collapse
Not sure I understand your question. What do you mean by version? My "getvar all" information is actually exactly the same as OP.
The nandroid backup that I downloaded was "M7 TWRP Nandroid Backup CID ROGER001 3.22.631.1". Hope that helps.
TheWijiBoard said:
Not sure I understand your question. What do you mean by version? My "getvar all" information is actually exactly the same as OP.
The nandroid backup that I downloaded was "M7 TWRP Nandroid Backup CID ROGER001 3.22.631.1". Hope that helps.
Click to expand...
Click to collapse
So you just created a mismatch between your software version and your firmware version.
Your software is now 3.22.631.1 and your firmware is 7.17.631.7, you want the firmware and software to be the same version hence why OP shouldn't do the same.
There is already a 7.17.631.7 ruu posted in the general section, use this instead and then root your phone using supersu 2.46
So if you are s-on, you will need to re-lock the bootloader first, flash the 7.17.631.7 ruu, unlock the bootloader, flash twrp and root.
alray said:
So you just created a mismatch between your software version and your firmware version.
Your software is now 3.22.631.1 and your firmware is 7.17.631.7, you want the firmware and software to be the same version hence why OP shouldn't do the same.
There is already a 7.17.631.7 ruu posted in the general section, use this instead and then root your phone using supersu 2.46
So if you are s-on, you will need to re-lock the bootloader first, flash the 7.17.631.7 ruu, unlock the bootloader, flash twrp and root.
Click to expand...
Click to collapse
Sorry, but I just don't happen to see it.
Nevermind; it seems to be available on htcdev. I hope that is okay to use.
TheWijiBoard said:
Sorry, but I just don't happen to see it.
Click to expand...
Click to collapse
The ruu is here:http://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944
relock your bootloader (only if the phone is s-on)
flash the ruu
unlock your bootloader again
flash your custom recovery
flash supersu 2.46
btw if you are using a recent twrp recovery like 2.8+ it should already have the latest supersu included so you don't need to flash supersu 2.46 manually, just enter twrp then exist, you'll prompted to root, select "yes" and the phone will reboot and be rooted.
alray said:
The ruu is here:http://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944
relock your bootloader (only if the phone is s-on)
flash the ruu
unlock your bootloader again
flash your custom recovery
flash supersu 2.46
btw if you are using a recent twrp recovery like 2.8+ it should already have the latest supersu included so you don't need to flash supersu 2.46 manually, just enter twrp then exist, you'll prompted to root, select "yes" and the phone will reboot and be rooted.
Click to expand...
Click to collapse
Ah, okay I shall do this now. Will update after I'm done. Thanks for all the help.
---------- Post added at 10:53 PM ---------- Previous post was at 10:48 PM ----------
alray said:
flash the ruu
Click to expand...
Click to collapse
Stupid question but to flash it, do I do the following:
reboot oem
fastboot flash zip *nameofruu* (twice if need be)
fastboot reboot-reloader
TheWijiBoard said:
Ah, okay I shall do this now. Will update after I'm done. Thanks for all the help.
---------- Post added at 10:53 PM ---------- Previous post was at 10:48 PM ----------
Stupid question but to flash it, do I do the following:
reboot oem
fastboot flash zip *nameofruu* (twice if need be)
fastboot reboot-reloader
Click to expand...
Click to collapse
no.
fastboot oem rebootRUU
fastboot flash zip ruu.zip
fastboot reboot
You need to use htc_fastboot.exe which is provided in that thread and no longer need to flash twice. After doing "fastboot flash zip ruu.zip" the ruu will flash the pre-update, reboot itself in ruu mode and continue the second flash automatically.
alray said:
no.
fastboot oem rebootRUU
fastboot flash zip ruu.zip
fastboot reboot
You need to use htc_fastboot.exe which is provided in that thread and no longer need to flash twice. After doing "fastboot flash zip ruu.zip" the ruu will flash the pre-update, reboot itself in ruu mode and continue the second flash automatically.
Click to expand...
Click to collapse
Will I be able to use htc_fastboot.exe on linux?
TheWijiBoard said:
Will I be able to use htc_fastboot.exe on linux?
Click to expand...
Click to collapse
well a .exe is for Windows. maybe it can work if you use Wine + cmd.exe + htc_fastboot.exe ? Never tried.....
alray said:
well a .exe is for Windows. maybe it can work if you use Wine + cmd.exe + htc_fastboot.exe ? Never tried.....
Click to expand...
Click to collapse
Is there an advantage of using the htc-fastboot other than not having to hit it twice? Because then I can just use the one I have been previously that does work on Linux.
If you google "htc one root linux", the first link from htconeroot is the tutorial I was following. He had shared fastboot/adb files that work on linux and those are the ones I am using.
TheWijiBoard said:
Is there an advantage of using the htc-fastboot other than not having to hit it twice? Because then I can just use the one I have been previously that does work on Linux.
If you google "htc one root linux", the first link from htconeroot is the tutorial I was following. He had shared fastboot/adb files that work on linux and those are the ones I am using.
Click to expand...
Click to collapse
the normal fastboot won't work to flash 7.xx.xxx.x ruu, you must use htc's version of fastboot which is only available in .exe. the "normal" fastboot from google can't handle the file size of new 7.xx.xxx.x RUUs.