Database Develop

[Dec 21][APP]PS3DJB v2.5.1 Supports Eng, Ger, Nor, Esp & Fr

Hello everyone,
Here is my app i have been working on. It will install all files to your sd card needed to jailbreak and downgrade your ps3 with your HD2 Only. Now i have some time think this link is long overdue to be posted. Where this app originated from. Again thank you to all the other devs out there for there hard work that has now become a all in one solution.
What the app does:
This app will allow you to downgrade your firmware to any firmware you want. (PS3 Slim's cannot go as far back as Fat Consoles.) The downgrade only works with FW's up to 3.50. (If you have FW3.55 you are out of luck for now. Unfortunately there is no solution on the market nor in the community for that FW version.) This app will also allow you to patch your android build with all the files needed to jailbreak your ps3.(this will be changed real soon.) It also includes many payloads so u can use the one that best matches your needs.
Other Languages:
German version Located here I have also translated the first post in German as well. Enjoy
Norwegian version Located here I have also translated the first post in Norwegian as well. Enjoy
Spanish version Located here. It is compatible with Esp Rom's storage cards. I have also translated the first post in Spanish as well. Enjoy
French version Located here. It is compatible with Fr Rom's storage cards. I have also translated the first post in French as well. Enjoy
Instructions:
you will need to download both files found below.
DowngradeUpdater(needed)
PS3DJB Updated to 2.5.1 - English Only - Now Includes darkstone hd2froyo v3 in a custom folder just for jailbreaking. Size 103mb
Install:
Make sure you have placed your android build of your choice on the root of your sd card before installing. Your android build must be placed in the Android folder.
1.install downgradeupdater.cab to storage card. (this only contains the downgrade folder)
2. install PS3DJB.cab to storage card. (this contains the main UI and all jailbreak files)(does not include modified 3.41 PUP, lv2diag.self file 1 and lv2diag.self file 2)
Pre Use:
1. run app and select backup original android build (must do this first before you run setup jailbreak if you want to keep your original zImage of your Android build.)
2. select setup jailbreak. This will transfer all the files to your android build. if you replace your android build later on with a newer version just rerun the setup jailbreak.
Use:
1. once you set up jailbreak then proceed to select Launch PS3DJB. Follow the jailbreak instructions on the process. There are tons of tuts on how to do so. It is all they same for the most part. What is different for the HD2 is Once you boot into Android go and launch Gscript and select the payload of your choice. Then wait till it starts to auto countdown then plug the phone into the ps3 and start the jailbreak process.
2. If you want to downgrade your ps3 launch downgrader. This will take you to a mini android build made specifically for downgrading your ps3. This will not affect your other android builds
Questions and Answers:
Q) how do I know when everything backed up, restored or setup for jailbreak?
A) it will complete when the button image snaps back to normal when completed.
Q) im done downgrading and cant turn off the phone with the power button?
A) If you run the downgrade portion of the app you will need to pull the battery out when your done and reboot the phone. this is not due to my app it is part of the downgrade setup.
Q) Where is the Gscript folder located at?
A) gscript folder installs to the root of your SD card. It should install when you install the PS3DJB.CAB if you do not see it. Reboot your phone. Sometimes it caches till a reboot. not sure if its a OS issue or a Rom issue.
Q) I started Gscript and only see a couple of payloads. Isnt there more?
A) if you are missing payloads in gscript listing hit the windows button then select add script. Then finally select load. find a missing script select it and save. it will now populate to your main list in gscript. you will need to add. hermes 3.50 + PSN v4b, CE-X hybrid payload, and 2.76FW payload.
Q) I have multiple android builds will this mess with them?
A) Yes and No. It will only mess the the android build located in the Android Folder. If you want to make sure your stock android build stays stock after jailbreaking run the backup original android build button first to back up a copy of your original zImage. Once your done jailbreaking just run restore original android build to restore the backedup zImage.
Q) Do I need to install the downgradeupdater.Cab if I don’t plan on downgrading?
A) No you do not. It does not affect anything releated jailbreaking. If you hit the launch downgrader button without it installed will cause the app to display a message about it missing.
Q) if i downgrade will i loss my game saves? if so how do i keep them?
A) If you downgrade you may loose your game save. Go to system settings and back up your system. the option is at the bottom of the list almost. you can restore the same way
if you have any suggestion let me know.
enjoy!
PAYLOADS included:
Hermes v4b+355 FW3.41
CE-X FW3.41
Hermes FW3.41
Hermes v4b + psn + 3.50 FW3.41
PL3 FW2.76
PL3 FW3.01
PL3 FW3.10
PL3 FW3.15
PL3 FW3.41
*IMPORTANT*
for downgrading you will need the 3.41 modified pup, lv2diag.self file 1 and lv2diag.self file 2. these are needed once you obtain service mode
Change log:
Version 2.5.1
*added my custom data.img (57mb) to jailbreak rom. Should save a lot more space on the storage card and boot faster. My boot took 1 min 37 sec which was faster than the 1GB data.img created on first boot.
Version 2.5
*Removed setup Jailbreak, backup and restore buttons.
*Jailbreaking now has a dedicated folder that has a pre setup build of android ready to jailbreak
*included a dedicated android launch button for those who have daily use builds of android on there phone located in the android folder
*new start menu icon - thanks to drkfngthdragnlrd
Version 2.0
*removed any backing up or replacing of initrd.gz as it is not really needed for our purposes.
*should work better with new builds of android as i backed off the filestructure some.
version 1.6
*backup original android build now backs up zImage and initrd.gz
*restore original android build now restores zImage and initrd.gz
version 1.5
*added backup original android build button - this will back up your original zImage on your untouched android build.
*added restore original android build button - this will restore your original zImage and delete all files related to jailbreaking in your android folder
*updated functionality of setup Jailbreak button - now will create all jailbreak related directories in the android folder then install all files needed.
Thanks goes out to:
mangahoteles, Darkstone, Dan1j3l for the original builds of psfandroid
The Invisible GoD & KillaHurtz for there payload ports

sorry for noob question... what for this app actually?

Wonderful app! Thank you for your work. Wouldn't this be better suited for the HD2 Apps forum though?

socrated13 said:
Wonderful app! Thank you for your work. Wouldn't this be better suited for the HD2 Apps forum though?
Click to expand...
Click to collapse
i thought it might be but was not sure. if a mod wants to move it feel free.
This app just make things easier/noobier for people who want to jailbreak or downgrade there ps3. i personally got annoyed always having to open file explorer and hit both options to launch. i have a lot of crap on my sd card so this makes it easier for me and i hope others. it will also give you a dedicated folder for the downgrade.
i can always make the jb a dedicated folder but i notice that android runs fine with the jb files integrated. it did not affect my user experience so i did not do that originally.

Thank you! This is an extremely useful app, you have made my life so much easier...

azaini said:
sorry for noob question... what for this app actually?
Click to expand...
Click to collapse
If you don't no for what this app is, probably is not for you!
HackMimic, thanks for the great job!

HackMimic said:
i thought it might be but was not sure. if a mod wants to move it feel free.
This app just make things easier/noobier for people who want to jailbreak or downgrade there ps3. i personally got annoyed always having to open file explorer and hit both options to launch. i have a lot of crap on my sd card so this makes it easier for me and i hope others. it will also give you a dedicated folder for the downgrade.
i can always make the jb a dedicated folder but i notice that android runs fine with the jb files integrated. it did not affect my user experience so i did not do that originally.
Click to expand...
Click to collapse
Very cool good job!!

I am curious to where you get the lv2diag.self file 1 and lv2diag.self file 2 files

youngkwang49 said:
I am curious to where you get the lv2diag.self file 1 and lv2diag.self file 2 files
Click to expand...
Click to collapse
Like here for example...

Doesn't work for german ROMs, cause in german "Storage Card" means "Speicherkarte" and so the path for the setup is wrong ... Installing is no problem.

This is awesome
Thank you HackMimic

the only probem with using ps jailbreak on my hd2 android is that it breaks my camera

had the same problem when I made my multi os launcher app days ago. I have the translation for German and another language. I will make the proper changes for ya. Would you prefer everything visual to read in German.

HackMimic said:
had the same problem when I made my multi os launcher app days ago. I have the translation for German and another language. I will make the proper changes for ya. Would you prefer everything visual to read in German.
Click to expand...
Click to collapse
German is not that important for me, but if it is no big effort it would be fine.

What version firmware does this work on i have .55 firmware, a stupid friend of my sister installed it. I hope it works for this too

supaet said:
the only probem with using ps jailbreak on my hd2 android is that it breaks my camera
Click to expand...
Click to collapse
Same here.

HectiQ said:
What version firmware does this work on i have .55 firmware, a stupid friend of my sister installed it. I hope it works for this too
Click to expand...
Click to collapse
unfortunately if your at 3.55 there is no way to downgrade as they revoked the leaked keys. there where 3 of them i believe. i would not update your ps3 anyfurther down the road and wait till there is a workaround. im always scared my roommate will do the same. thats why i bought two. one jb in the front with a ps3key. thats what my roommate will use since its easy and one in my room with my htc now.

bahoiz said:
Same here.
Click to expand...
Click to collapse
Does it break the camera in WM or android? My camera in WM works fine. if in android it might be the zimage file used. I think i will need to make a backup folder and include a button to backup original zImage of the rom so you can restore it when not jailbreaking.
also doing a pure german rom is no big deal. Let me update the app to do this new stuff first and when i upload it i will upload a translated version as well.

Hi,
I am using an english version wm, still says that the directory can't be opened
Storage Card/blah blah blah..
using android RAM version by darkstone.. maybe that's the cause?

Whenever I click on "Setup Jailbreak", I get an error message saying, " An unexpected error has occurred in SmartDeviceProject1.exe. Select Quit and then restart this program, or select Details or more information." I'm using a dexter wm rom, "TheDarkOne WWE". Radio 2.10.50.26. Any help would be appreciated.

[R&D] QuickSwitch Between Recent Applications (Updated with instructions)

** Edited: Instructions at the bottom **
I have the Nexus S, and when I upgraded to ICS I found that opening the recent app dialog could take a while.
I wanted the ability to quickly switch to recent apps, so I thought the power and volume up/down buttons combination could be used to do this.
Quickly tapping on the power and volume up/down buttons together brings the previous/next recent app to the front
I prepared a short video to demonstrate (sorry for the lack of interesting audio in the video):
http://youtube.com/watch?v=ndGd2y9ro14
I created this and tested it for about a week.
It works fine, but still needs a bit tweaking and maybe some configuration through the settings screen (enable/disable completely, tapping time, cycle/don't cycle apps).
One major issue is that I believe it is only comfortable when the power and volume keys are located on opposite sides, like on the Nexus S.
This is a small modification to CM9, so I have a few questions maybe you could help:
Is there a way to include features per devices? I saw that the code checks for devices with or without the search button. Is there a way to know which device has the power button on the right? Or do I need to map it before-hand? Which brings me to..
Do you think this is this something worth uploading to CMGerrit for review to be included in CM, maybe enabled as an advanced feature in the settings section?
Do you know any ROM maintainer that would want this feature?
Any suggestions to improve (or drop) this are appreciated, maybe adding an indication of the app switching.
** INSTRUCTION **
Please follow one of the next instructions to get it (whatever suits you):
Install using a flashable zip
Download the attached flashable zip file (quick-switch-0.01-signed.zip), and flash it from recovery.
This is compiled from CM9 RC1. While it may work with later nightlies or other similar ROMs, I cannot guarantee that it does.
To revert, flash your ROM over it.
Install the jar file manually
I've also attached the JAR file so that you could install it manually.
The JAR should replace /system/framework/android.policy.jar
Backup the current one, copy the one from this post over it, clear the dalvik cache, and reboot.
You'll probably need to remount the /system folder so you could write over it (adb remount).
Note: You cannot do this from recovery because recovery doesn't mount /system automatically. To mount /system from recovery just type "mount /system" from "adb shell".
To revert, just copy the JAR from the backup and clear the dalvik cache.
Get the source (Advanced)
I forked the relevant project (android_frameworks_base) on github.
The commit is: https://github.com/lightpriest/andr...mmit/28e2caa1459d9be287d5e0b68b6ca04fee45970d, and it is present both on ics and ics-release branches.
An important note
While this is a nice thing to play around with, I've noticed that the power button started to wear on my device. I'm not 100% sure it's related, but I'll take a "wild" guess that it does. Not to say that the power button doesn't work at all, but I noticed that now sometimes it's enough to just slide a finger on it to actually press it. So, you've been warned
I'll probably make another build for JB, once it gets stable.
Attached files checksum:
quick-switch-0.01-signed.zip - 474e5d53cff57a163f9c24ec8301b2a7
android.policy.jar - eba03024571866fc0161e19484dc200a

youtube.com/watch?v=ndGd2y9ro14
That feature actually looks quite interesting, and usable. Would love it, myself.
I'm not sure whether or not it'd be accepted in CM, since they want their builds to be much more streamlined and easy to understand than GB builds. Who knows though, as I said, it's an interesting feature. There's also the problem with power- and volume keys that wear out. And this mod would no doubt accelerate that.
With that said, I would absolutely love a smali-version guide for this.
Edit: evilisto created a guide on how to map the multitasking button the the search key, which helps a lot. I recommend you check that out.

It is also possible to map the GB taskswitcher to search button. The gb is imo faster than the ics one

yeah its a cooool feature.. but the thing is...jelly bean has got super speedy task switchin even on our nexus s...

I'm not sure on what's the best way.
I can generate a diff of the smali files, and then maybe create a guide out of it.
I also created a signed update zip file, with the JAR that needs to be replaced.
The flashable zip was created from CM9 RC1, do you prefer the zip or the smali?
I'm not yet sure on how to provide this kind of guide smali, because the diff looks quite large.

Updated the post with instructions and notes (at the end).

Amazing work . Though they removed the lag in displaying recent applications in Jelly Bean. Its very snappy now.

Thanks!
I thought it was just a matter of time until the recent app overlay would work faster. From the beginning I considered this as an experiment.
This was just a nice thing to work with (and create), experimenting with the Android building environment and creating a flashable zip..
Learned a lot actually.

Actually, it is a great mod! I like it very much, makes simple two-task switching a breeze (like chatting on GTalk and writing an email simultaneously). Would you consider porting this to JB releases? AdamG's JB-Oxygen will be for sure a popular, stable release. I also think that AOKP team would love to implement your idea in their releases, since they offer feature rich roms.
Here's link to Adam's JB Oxygen : AdamG's JB Oxygen release
Great job lightpriest!

Rom (port) aokp cm10

removed for reconstruction

Downloading this now, will flash and report.
I want my unicorns

MarkInDaPark said:
Downloading this now, will flash and report.
I want my unicorns
Click to expand...
Click to collapse
Forgot screenshots:

Okay, played for a few minutes and these are my results so far;
AOKP settings crash easily, for example by trying to change processor speeds // Only on first boot
Annoying "Preparing USB Storage" notification, SD card works though // Only on first boot
ROM is snappy and speedy
The install procedure was confusing; I'd like to see it just as a normal flashable ZIP, this is useless rice
Wake on trackpad doesn't work (is the script included, as in the Zeu CM10?) // The script is included in /system/bin/trackballwake, and it works
ROM feels slightly bloated (don't include all these third party apps in the future!) // Removed a lot of bloat by TBP and ROM accually had some space left. It's very crowded stock.
Also, is it allowed to include gapps in this manner?

MarkInDaPark said:
Okay, played for a few minutes and these are my results so far;
AOKP settings crash easily, for example by trying to change processor speeds // Only on first boot
Annoying "Preparing USB Storage" notification, SD card works though // Only on first boot
ROM is snappy and speedy
The install procedure was confusing; I'd like to see it just as a normal flashable ZIP, this is useless rice
Wake on trackpad doesn't work (is the script included, as in the Zeu CM10?) // The script is included in /system/bin/trackballwake, and it works
ROM feels slightly bloated (don't include all these third party apps in the future!) // Removed a lot of bloat by TBP and ROM accually had some space left. It's very crowded stock.
Also, is it allowed to include gapps in this manner?
Click to expand...
Click to collapse
You have to do same trick as per original CM10, i.e set "keep Wifi on during sleep" to "always". Also after create/sign in your google account, give it a reboot.
Aroma installer, if proper configured allows you to customize your rom while flashing. You can also, after flashing rom, go back to aroma and check system info (model, name, device,storage, cpu, LCD density and other details)
Trackballwake is same as Zeu CM10
The difference on this rom is it creates /data folder during flashing and install whatever non-system apps you want in this folder, leaving more space in system folder. So you can customize the rom as you like by adding/removing apps in the zip file, "data folder", before flashing. I found it useful as every time i flash a rom i have to spend time installing market, gps fix, antutu, terminal emulator and all other stuff i need.
Also apps in the zip file "data/app" folder being user apps you can uninstall them easy after flash.
Most if not all of the supplementary apps got them from other roms posted on this site. They are free anyway and i don't sell them.

Will it work on hboot 1.00 s-on
Sent from my Legend using xda app-developers app

ic3141 said:
You have to do same trick as per original CM10, i.e set "keep Wifi on during sleep" to "always". Also after create/sign in your google account, give it a reboot.
Click to expand...
Click to collapse
I can't even connect to my WiFi network, but I can't do that in CM10 either, so I guess it's some router problem or something.
ic3141 said:
Aroma installer, if proper configured allows you to customize your rom while flashing. You can also, after flashing rom, go back to aroma and check system info (model, name, device,storage, cpu, LCD density and other details)
Click to expand...
Click to collapse
...Do people really want this? I don't get the point of an 'installer'. We have the glorious ZIP flash - the way God meant us to install ROMs.
Configuring ROM during flash? No. I think many people agree that we want a clean AOKP. You could make two zips; one clean AOKP, and one with your bloat/"useful apps" so that those who can't be arsed to download 7 apps (or restore them from earlier) can do so by flashing a zip.
ic3141 said:
Trackballwake is same as Zeu CM10
Click to expand...
Click to collapse
Yep, works fine.
ic3141 said:
The difference on this rom is it creates /data folder during flashing and install whatever non-system apps you want in this folder, leaving more space in system folder.
Click to expand...
Click to collapse
More space? I found myself with a studdering, slow system after a few reboots. Looking in TBP, I noticed that I had 45kB free in /system.
Removed some system apps and I had 3 MB left. Isn't that less than CM10?
ic3141 said:
So you can customize the rom as you like by adding/removing apps in the zip file, "data folder", before flashing. I found it useful as every time i flash a rom i have to spend time installing market, gps fix, antutu, terminal emulator and all other stuff i need.
Click to expand...
Click to collapse
Ever heard of Titanium Backup? Much simpler than fiddling with a ton of apks.
ic3141 said:
Most if not all of the supplementary apps got them from other roms posted on this site. They are free anyway and i don't sell them.
Click to expand...
Click to collapse
Uh yes, but if you read and responded to what I was typing, i said "gapps". Notice the "g", meaning "google" in this case. This is a set of proprietary google-apps, which are to be provided seperatley for all non-AOSP builds due to licensing.

ic3141 said:
removed for reconstruction
Click to expand...
Click to collapse
I have decided to wait a while for a more stable JB rom (thanks to Zeubea).
Will post the port for the last nightly built together with a small surprise: MIUI 2.10.26 (quite stable) and 2.11.23 (a lot of diff still required)

[TUTORIAL] Manually port T-Mobile Alliance ROM 5.0.1 to Verizon Dev Edition (12/8/15)

** Got Verizon Note 4 Dev Edition to work with Alliance T-Mobile ROM!! Data, calling, sms, mms work ! I smell a daily driver! I am not a developer, but this manual port taught me a lot. This was a personal project of trial and error, and research that turned into a stable ROM. Thought I'd share how I did it. I do not take credit for this ROM or kernel**
DISCLAIMER: Your warranty is now void. Please be careful make a nandroid of your current Verizon ROM. I am not responsible if you break your phone or lose data on your device! Read this whole OP!
**This is using the BETA version of Alliance ROM for T-Mobile Note 4. Download the Alliance BETA and read the thread: http://forum.xda-developers.com/not...-0-1-allianceromn910t-18-themes-huge-t3085560 to get an idea of the features of this ROM. Give lacoursiere18 and hsbadr a thanks and donate to them for making this great ROM and kernel.
Follow these steps one after the other and don't stop**
1. Make sure you are on a OAF Lollipop ROM without xposed installed. I think I used Rick's OAF Lollipop ROM originally. Download the most recent multisystem kernel. I am on BOG modem so I'm pretty sure any Lollipop modem will work with this.
2. On your Verizon Lollipop ROM make copies on your SD card of:
- system/buildprop.xml & cscversion.txt
- system/etc/apns-config.xml
- system/etc/permissions/verizon_net_sip_library.xml & vzwapnlib.xml
- system/lib/libril.so & libsec-ril.so
- system/apps/VzwActivationAgent, vzwapnpermission & **SecSetupWizard2013**
- system/framework/VZWAPNLib.apk
- system/privapp/VZWAPNService & secmms_candy folders
- system/csc folder
4. Reboot into recovery and make a TWRP backup of everything except SD card.
5. While in recovery dirty flash Alliance ROM BETA on top of your lollipop ROM OAF (Wipe everything EXCEPT data, internal storage, and SD). Then flash the most recent multisystem kernel.
6. Once booted up and apps are optimized wait until the screen turns off by itself. Download root browser and delete system/privapp/diagmonagent.apk and system/lib/libdiagmonagent.so because at startup it was sending some kind of diagnostics and thought it was messing with the data drop. Ever since these changes and a reboot data has been stable!
Reboot
7. Using root browser, swap those copied files in the appropriate file location. Change them to the correct permissions (the folders get 0755 and the files 0644, compare with other files and folders that are in place already. Make sure you change the permissions on all folders copied over and their contents. If a permission is incorrect or you leave a file out there can be issues and a restore might be needed.). Let apps optimize. **Longest Step**
Reboot
8. Edit feature.xml in the system/csc folder and add:
<CscFeature_RIL_ForceConnectMMS>true
</CscFeature_RIL_ForceConnectMMS>
Above the two bottom tags:
</FeatureSet>
</SamsungMobileFeature>
This enables auto download mms when data is toggled off !
Reboot
9. Perform a factory reset within the settings. Let phone relax for like 10 mins after it boots. Go through the setup wizard and then reboot.
Reboot into recovery
10. Make an backup in TWRP and you have your own custom ROM
I'm pretty sure this ROM is not compatible with xposed but it is very customizable, smooth, and it comes with a lot of features built in.
**READ ME**
Bugs:
- Silent mode is only available using the toggle. Volume down only goes to vibrate.
**
- Battery section in settings is missing
- No way to remove battery percentage in status bar
(Workaround: Download "Battery Usage Shortcut" from the Playstore to access the battery section and to remove battery percentage)
**
- No way to uninstall 3mint battery mod without messing the systemui up **(see update at the bottom)**
- Now that the mobile network settings are correct the advanced calling option is avaliable but it force closes and messes up your data connection. A reflash of everything will be needed so don't click on it! (I have a feeling a Verizon app is missing)
- My volume titles are not correct (Ringtone, media, notifications, and system.) when I press the volume buttons. (**Workaround download Noyze Volume Panel for free from the developer
http://forum.xda-developers.com/android/apps-games/app-noyze-volume-panel-replacement-t2875501
Give Tombarr a thanks for developing such a slick and customizable app**)
11/18/15:
- Just started using voicemail for the first time in 6 years. Good thing because today I experienced a glitch that it would not let me hang up the phone after listening to voicemails for some reason, but it didn't do that when I was clearing voicemails. (Hangs up automatically after a certain amount of time) Maybe it happens to new voicemails. Also I'm assuming since the verizon voice mail app isn't installed I get a weird unreadable verizon text when I get a new voicemail.
- One hand mode is not in the settings. Not sure why
Any suggestions or thoughts about these current bugs would be helpful.
I cannot guarantee all Alliance settings will work (stay away from performance), but most does work and it's awesome!
This manual port is now stable and buttery smooth! All basic phone functions work. Let me know if you come across any bugs or issues not related to Alliance settings. I will try to help fix it.
Thanks Stedrocklp for taking the time to try and get this working. Jal3223 thanks for sharing that key porting info!!! Wouldn't be possible without your help! Thanks hsbadr for developing Multisystem kernel ! Thanks lacoursiere18 for creating this ROM !
UPDATE:
To update Alliance settings to the most recent version and remove 3mintbattery mod download the newest T-Mobile Alliance ROM v1.1
1. Use ES File Explorer and click on the Alliance ROM you just downloaded to open the archive.
2.
- Extract system/privapp/SystemUI/SYSTEMUI.apk
- In the system/app folder extract AllianceControl folder (towards the top) and all the loose apps without folders at the bottom to a folder on your sd card.
3. Make a system and data backup in TWRP just in case things go wrong. Reboot system
4. Swap all those files and folders in their appropriate file locations and change the folder permissions to 755 and files to 644. Take this step slow and make sure the old files are renamed to .old or overwritten. If a permission is incorrect or you leave a file out there can be issues and a restore might be needed.
5. In system/app folder delete the old loose Alliancecontrol.apk, and delete 3mintbattery.apk
6. Reboot and enjoy!
This is the final release of this ROM so we are all up to date ! :good:

Wondering if this will work for sprint or any rom

dyra502 said:
Wondering if this will work for sprint or any rom
Click to expand...
Click to collapse
I'm pretty sure it would but you need to figure out the sprint specific apps to make the system happy. And flash your sprint kernel after you dirty flash. The dirty flash skips the setup which makes it possible to boot correctly.

Would you mind sharing the Rick's ROM that you used? I looked at his thread, but the download links are no longer available. Thank you in advance for your help!

Romans8vs1 said:
Would you mind sharing the Rick's ROM that you used? I looked at his thread, but the download links are no longer available. Thank you in advance for your help!
Click to expand...
Click to collapse
Damn thats not good. I do not think I am allowed to share the ROM, as it's not mine. But I do not know how to share it anyways. I would just odin back to 4.4.4. and go through the upgrade process to OAF. Or you can try to de-xpose MoRom after a clean flash. I think there are two things you need to remove one being the xposed installer and the other I don't know the exact name but use root browser, search for xposed in the system folder, delete it, and reboot. No sure if it will messed anything up but I don't think it will. Then dirty flash the alliance beta and continue from there. Let me know how it goes!

jcip17 said:
Damn thats not good. I do not think I am allowed to share the ROM, as it's not mine. But I do not know how to share it anyways. I would just odin back to 4.4.4. and go through the upgrade process to OAF. Or you can try to de-xpose MoRom after a clean flash. I think there are two things you need to remove one being the xposed installer and the other I don't know the exact name but use root browser, search for xposed in the system folder, delete it, and reboot. No sure if it will messed anything up but I don't think it will. Then dirty flash the alliance beta and continue from there. Let me know how it goes!
Click to expand...
Click to collapse
Thank you for your response. I ODIN'd back to OAF and went through the steps in your tutorial. My phone booted up and I then proceeded to replace the files/folders and set permissions. I thought I was careful, but once I tried to reboot, the phone would not come back up.
Is there a way to make the changes (file permissions and replacing them in the ROM) on a PC?
Is there a way to share your edited files so that we could simply paste them into the ROM?
Just thought I would ask. Thank you in advance for your assistance!

Romans8vs1 said:
Thank you for your response. I ODIN'd back to OAF and went through the steps in your tutorial. My phone booted up and I then proceeded to replace the files/folders and set permissions. I thought I was careful, but once I tried to reboot, the phone would not come back up.
Is there a way to make the changes (file permissions and replacing them in the ROM) on a PC?
Is there a way to share your edited files so that we could simply paste them into the ROM?
Just thought I would ask. Thank you in advance for your assistance!
Click to expand...
Click to collapse
Damn thats a bummer. Even if I shared the files you would still need to change the permissions. I think it is possible unzip a verizon ROM and unzip Alliance rom and replace the files and then zip it back up on the computer and then dirty flash that but everytime I zip it back up it never flashes. It seems that when I zip it back up it adds an extra folder that makes it unflashable but haven't taken the time to figure out how to make it work. Try starting over and getting the ROM to boot then make a nandroid of that so you have something to restore. This is what I did when I was trying to get everything working. Next time try not adding the camera files and .jar file and add them after a reboot. Let me know how it goes.

Added the setup as one of the files to copy over so a factory reset can be performed to make sure you're starting with a fresh system. This is the first day I did this and I had to pull the battery twice due to freezes after I factory reset. I didn't let the phone sit and let it settle. I would recommend you let it sit and relax for like 10 mins. I have not had any lock ups since this morning. Lemmi know how it goes!

After the factory reset the ROM is flying. As for the battery I cannot say yet but I know I did not have the best battery life on this ROM before. It did get me through the day so I was happy about that. I calibrated the battery but that is about it. If any devs knows any battery optimizations that can be made to the system without xposed please share!

I heard from a user that Xposed works on this ROM. I personally do not use it though. As for battery life I've noticed better results after I disabled automatic check for updates in the settings. Settings > About device > Software Updates and uncheck auto check for updates. This ROM for some reason does not have the audio issues that I experienced on MoROMs ROM. I am happy about that. Now that we finally have the 5.1.1. update I am going to try and port a ROM that looks good. If anybody wants to give this a stab with me that would be great to test multiple ROMs from different carriers and see which one gives us the best results. Thanks

Got something amazing in the works!

Nandroid backup
Can someone send me a nandroid backup of this I'm worried about messing up my phone up

Is there a way to install this rom in the same manner as the kyobi note 5 port? I'm running that now, but would like to try this one out. I've tried a few times but just can't seem to get this one up and running.
Thanks in advance and have a blessed day!
Sent from my SM-N920F using Tapatalk

TheRock40359 said:
Can someone send me a nandroid backup of this I'm worried about messing up my phone up
Click to expand...
Click to collapse
That's a big file idk how I would be able to distribute that lol

Romans8vs1 said:
Is there a way to install this rom in the same manner as the kyobi note 5 port? I'm running that now, but would like to try this one out. I've tried a few times but just can't seem to get this one up and running.
Thanks in advance and have a blessed day!
Sent from my SM-N920F using Tapatalk
Click to expand...
Click to collapse
It's not that simple. A data fix would need to be made and that is out of the scope of my knowledge. But when I have some free time, possibly this weekend, I can attempt to come up with something for you to try.

jcip17 said:
That's a big file idk how I would be able to distribute that lol
Click to expand...
Click to collapse
Could upload it to dropbox

Anyone with a Developer addition phone willing to help us none developers get root/unlocked bootloader? New exploit found but we need an .aboot from a developer phone: http://forum.xda-developers.com/note...ition-t3346422

Since I am currently on BPA1 5.1.1 running the Kyubi ported ROM and this is a 5.0.1 ROM, will I have to do downgrade my device or anything or will I be good to go to dirty flash? Thanks in advance.

stajam said:
Since I am currently on BPA1 5.1.1 running the Kyubi ported ROM and this is a 5.0.1 ROM, will I have to do downgrade my device or anything or will I be good to go to dirty flash? Thanks in advance.
Click to expand...
Click to collapse
I don't recommend dirty flashing from Kyubi. You should try clean flashing MoRom then copying those files from the system. Then dirty flash Alliance, then multisystem kernel:
http://forum.xda-developers.com/not...opment/kernel-multiystem-kernel-v1-0-t3105603
And just follow the OP instructions.

jcip17 said:
I don't recommend dirty flashing from Kyubi. You should try clean flashing MoRom then copying those files from the system. Then dirty flash Alliance, then multisystem kernel:
http://forum.xda-developers.com/not...opment/kernel-multiystem-kernel-v1-0-t3105603
And just follow the OP instructions.
Click to expand...
Click to collapse
Yeah ,I am trying to pull the files I need from my stock ROM backup that I just freshly installed on my device. I stumbled upon a forum here today called Guides There seems to be ALOT of usefull stuff in here about Porting and Building ROM's. I don't know if you have ever come across it or not.

Android 4.4.3 - STOCK OS - DEBLOATED - 64bit

Android 4.4.3 - STOCK OS - DEBLOATED - 64bit
Hello everyone. Lets jump straight to the point. This here is a backup made with TWRP from the STOCK OS for the HTC Desire 510 64bit. The few plus sides are that is DEBLOATED and that it uses a kernel that has write protection removed. Just a side note: I am trying to make a flashable ZIP for this but I'm having issues. I always get boot loops. So for now this is your only option.
If you are familiar with TWRP and backups and all that stuff you can skip the next parts and download the ROM, If not, I advise you to read carefully the whole thread if you don't want to brick your device.
DOWNLOADs
Version 0.0.1 (STABLE) - https://mega.nz/#!nBJUDL7D!bmkQzsbywpbyJ7tzPybSRtYUG1LzsPNnv_M7wZr4PoA
Version 0.2.0 - DEODEXED - (BETA) - https://mega.nz/#!jApGjZDJ!zQoSmyaCSRBV6iBtQwEOR_mTYhzqYeFxhm5p1P-fk68
DISCLAIMER
I'm not responsible if you damage your device in any way!
What is changed?
Not much is changed.
Bellow are the app replacments I made:
1. Sense Home ---> NOVA Launcher
2. Sense Messages ---> Google Messages (Material Design)
3. Sense Calculator ---> Xlythe Calculator (Material Design)
4. Sense Calendar ---> Google Calendar (Material Design)
5. Sense Clock ---> Google Clock (Material Design)
6. Sense File Manager ---> ES File Explorer
7. Sense Weather ---> AccuWeather
4. Sense Keyboard ---> Google Keyboard
I removed a lot of HTCs and Google’s useless apps and other things, that are taking up space and resources.
From Google apps you have left:
1. Google Play Store
2. Google Chrome
3. Google Play Games
4. Google Drive
4. YouTube
5. All other background apps and services that are required for the Google apps to function properly.
From HTC apps you have left:
1. Camera app
2. FM Radio
3. Gallery (I couldn't find a decent replacement)
4. Music
5. Photo Editor
6. LockScreen
I have removed the HTC Browser, Zoe, E-mail and other useless stuff from HTC.
I have included:
1. Clean Master Lite - It's much faster than the full blown app and gets the job done. Lots of people hate it but it works like a charm on this device.
2. DiskInfo - With this little app you can see all of the partitions on your device. Regardless if you are S-ON or S-OFF.
3. Glim Lite - A set of beautiful Material design icons for NOVA launcher.
I didn't include an E-mail app because the Play Store is full of them and I couldn't choose. This choice is up to you.
How to install it?
First of all you need an unlocked bootloader with a TWRP - custom recovery installed on your device.
To unlock your bootloader go here http://forum.xda-developers.com/desire-510/development/bootloader-unlock-htc-desire-510-t2910233. Follow that tutorial to get your bootloader unlocked. After a successful unlocking you'll need a custom recovery.
Download this file: https://dl.twrp.me/a11ul/twrp-3.0.2-0-a11ul.img. This is the latest TWRP recovery for our device. Now we need to flash this file on the device:
Before starting put the contents of the ZIP file on to your SD card. And make sure that it has this folder structure:
Code:
--SD CARD
--TWRP
--BACKUPS
--Your device serial number (The name of this folder should be the serial number of your device otherwise TWRP won't see the backups in this folder)
--2016-04-17--13-49-21_KTU84L_release-keys (Don't change this, I don't know what will happen if you do)
1. Power off your device by pulling the battery out and putting it in again.
2. Press the Volume Down and Power Buttons until you see the HBOOT screen.
3. Press the Power button again to enter Fastboot mode.
4. Connect your phone with your PC using an USB cable.
5. Now open your terminal (I'm using Ubuntu but it's same in Windows as well) and type:
Code:
fastboot devices
This will show you an output like this:
Code:
--your devices serial number-- fastboot
If it doesn't show you an output like that then you probably didn't install the drivers correctly or you have a faulty USB cable.
If your output is the same as above than we can move on.
This command will flash the TWRP recovery on your device:
Code:
fastboot flash recovery /full/path/to/the/recovery.img
Example:
Code:
fastboot flash recovery /home/denny/Downloads/twrp-3.0.2-0-a11ul.img
Now you have TWRP on your device.
To boot TWRP press the Power button to go back to the HBOOT screen and navigate to the RECOVERY option with the volume keys and again press the Power button. After a few seconds you'll see your new recovery.
Restoring the backup
First we need to wipe any potential data that will cause conflicts with the new system.
1. Tap on "Wipe"
2. Tap on "Advanced Wipe"
3. Select all but leave the Micro SDCard option unchecked.
4. Swipe the slider to wipe the data.
After that is complete press on the house button on the lower end of the screen.
Now we are going to restore the backup:
1. Tap on the "Restore" button.
2. At the lower left corner tap on "Select Storage" button.
3. Choose "Micro SDCard" option and press OK.
4. Now you should see the backup folder. Open it.
5. Select "Boot" and "System" and swipe to start the restoring process.
6. Press "Reboot System" after the restoring has finished.
After you setup you system apply the Glim Lite icon pack to NOVA launcher.
Bellow are some screenshots of the new look.
Big thanks to:
@wolfaas12345 - for providing a tutorial on how to unlock your bootloader.
@rbheromax - for making a kernel with write protection removed.
@patrik.KT - for developing the TWRP recovery for our device.
If you are having any trouble ask a question on this thread or send me a private message.
XDA:DevDB Information
DeSense, ROM for the HTC Desire 510
Contributors
denny.hell
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: None
Based On: Stock Sense 6.0 / 1.51.401.7
Version Information
Status: Stable
Created 2016-08-13
Last Updated 2018-03-23

BETA testers for OTA updates
I have managed to enable a function for our ROM to receive OTA updates directly from me. This will make updates more easy to be deployed and cuts down the time for me to upload the whole ROM and for you to download it and flash it. Be advised that this is for testing purposes only (for now). I don't know how much stable the ROM will be after receiving an update.
By flashing the ZIP file below you acknowledge that you are wiling to become a BETA tester and that you do this at your own risk.
Step 1.
You need to download the ZIP file below this post and flash it like any normal flashable ZIP.
The ZIP file contains a new app for OTA Updates, a new lib file for proper functioning of the app and an edited build.prop file. The build.prop file contains information to tell the app where to check if new updates are available, so please do not edit it yourself.
The app will say that there are no updates. That is not a bug, error or a glitch. Currently there are no updates. When an update is deployed the app will send you a notification.
Step 2.
Send an email to [email protected] to confirm that you have downloaded and flashed the ZIP file and that you are willing to be a BETA tester. Please use a valid email because I will be contacting you to share feedback about the new updates and discuss any issues you might have.

Reserved

Thanks a lot for the sharing!
I will definitely test it

BTW you say that you have problem - bootloop with the .zip, did you tried to flash boot.img manually after flashing of the .zip?
Also instead of gallery I use simply photos by google
Or there is also lightweight Gallery app by google (com.android.gallery3d). You will probably find it in GAPPS

Benik3 said:
BTW you say that you have problem - bootloop with the .zip, did you tried to flash boot.img manually after flashing of the .zip?
Also instead of gallery I use simply photos by google
Or there is also lightweight Gallery app by google (com.android.gallery3d). You will probably find it in GAPPS
Click to expand...
Click to collapse
Thanks for those tips. I will definitely take a look at the lightweight gallery.
I tried flashing the boot.img manually but nothing. I've got it to boot up just once but there was no wi-fi. That leads me to belive that the permissions in the updater-script are not set up properly but also could be something else. If you have experience with updater-script do you think that you could help me out?

Unfortunately I don't have any bigger experiences with updater-script
Few times I edited it, but never so big one like installing ROM...
Anyway can you sand me the zip? I will try to look, but I don't promise anything

hi,
thanks so much for this Debloate.:good:

Well done developer! Phone itself is 10x faster without the bloatware apps on! Thank you so much developer!

Thanks a lot for your sharing. I finally have a nice going device. Its the best solution currently for this phone.

Hello mates i have an question
This version has fix that permision for sd card ?
Sent from my HTC Desire 510 using XDA-Developers mobile app

4. Now you should see the backup folder. Open it.
I do not see anywhere
what to do with the zip file that I downloaded from the above link
My bad, I did not read everything you've written

myke_angell said:
Hello mates i have an question
This version has fix that permision for sd card ?
Click to expand...
Click to collapse
Yes...I don't have any trouble with my SD card

Moki1 said:
4. Now you should see the backup folder. Open it.
I do not see anywhere
what to do with the zip file that I downloaded from the above link
My bad, I did not read everything you've written
Click to expand...
Click to collapse
No problem, if you have any further problems don't hesitate to ask

would be nice to have HTC Sense UI and email app left and htc foto editor and gallery removed and replaced by Google Photos, I don't understand why stick to ES File Explorer which does have in app ads rather have native file explorer, also I don't understand why I need that clean tool when android is managing ram just fine in this version.
Sorry if that sound rude, language barrier
Keep up with good work.

X-77 said:
would be nice to have HTC Sense UI left and email app and htc foto editor and gallery removed and replaced by Google Photos, I don't understand why stick to ES File Explorer which does have in app ads rather have native file explorer, also I don't understand why I need that clean tool when android is managing ram just fine in this version.
Sorry if that sound rude, language barrier
Keep up with good work.
Click to expand...
Click to collapse
No problem, any feedback is more than welcome. The Sense UI will remain, the theming I'm gonna make will only be on the icons and maybe the QuickSettings layout of the buttons, nothing too big to ruin the Sense feel. I might get back the e-mail app if I can't find a descent replacement for it. In the next update the HTC Gallery, alongside the Photo Editor will be replaced by Google Photos. Also the ES File Explorer, I'm gonna replace it with something that is adds free, simple to use but versatile. The Clean tool is not much for RAM as it is for Junk removal. Here is an example: Yesterday I was listening to some music on YouTube for about two hours. After that, I run the Junk Removal tool....It removed somewhere around 900Mb of useless data. You see how you can free up some space with it. I plan to keep it, but If I get negative feedback about it I will remove it.
Again thank you for your feedback.

E.g. Total Commander is simple and nice explorer without adds
BTW now when you have root, you can install "adblocker" app

deodex is not good for this device beacuse have small memory and charge it useless, odex files have sufficient space in system.
my oppinion

lucyr03 said:
deodex is not good for this device beacuse have small memory and charge it useless, odex files have sufficient space in system.
my oppinion
Click to expand...
Click to collapse
Thank you for your opinion. The main reason that I deodexed the ROM is to save up on the size of the actual download. I'm currently running the deodexed version on my phone and it works just fine. But still it will remain in BETA version unless I get positiv feedback about it.

Guys, I recall what I said, don't listen to me I'm a noob