I am currently rooted on stock rom with CF Auto Root and I am wanting to put Cyanogenmod on to my Note 4. I have tried to flash with odin Philz Touch but everytime I try to it fails. Am I needing to unroot my phone first then try flashing Philz to my phone? Or is there something I am doing wrong.
Related
Hello.
So i've got a problem with my I9000.
I've upgraded it to froyo, official release, so i'm stuck with the 3e recovery.I recently flashed the voodoo lagfix kernel via Odin. I would like to get clockwork recovery to replace 3e, but I understand i have to flash it via Odin, too. My question is : Is clockwork's kernel going to replace voodoo? If so, how can i have them both?
Thanks a lot in advance.
if you upgrade offical froyo then u must first do a root..the root files can be find here http://forum.xda-developers.com/showthread.php?t=788108...download correct root for your firmwire phone...then flash it tru odin..when u done with that u must download a rom manager from market...and install it to get clockwork mode =)
I wouldn't follow the previous poster's advice.
If you're going to use cwm, why do you want stock firmware? Try flashing speedmod kernel to get cwm, which has built in root and lagfix accesable from recovery. Or just go to a custom fw like docrom kitchen.
Best procedure for going custom with the sgs is a single flash of speedmod w/ cwm from odin, and then flash anything else via cwm.
Sent from xda premium app on i9000m.
Hi
I have samsung galaxy s1 and I tried to install a custom rom by the odin, I did it few times already but this time I encountered a problem.
I wanted to install a new rom and a new kernel, I had a rom with no option for "install from zip file" in the recovery mode, so the first thing I did is to install the rom by inserting the CSC PDA and PHONE files.
Then, I installed a new kernel also by the Odin, speedmode 16,
Then I was trying to get into recovery mode to install my custom MIUI and I couldn't, the phone just refuses to get into the recovery mode.
I could get into download mode, and the phone is working just fine, but I dont have the recovery mode.
Now Im looking for a recommended rom stock to install a clear fresh installation, because I dont think I have another option, I would like to get a recomendation for a rom and for a kernel to fix this problem and to renew my phone.
Thanks
Just flash a cfroot kernel followed by miui and you are golden.
Sent from my GT-I9000 using xda premium
I tried each and every thing to get full root but everytime I end up with that fu** partial root. Is there anybody who can guide me. I had tried following things till now :
1. Installed Factory kJ1 via pc odin.
2. Got full root access in KJ1 GB rom (tested by pasting a file in system folder)
3. Rebooted in recovery.
4. Installed Red pill Abyss kernel.
5. Did all the three wipes in red pill mode.
6. Installed Kingdroid Rom and s3 mod patch via red pill abyss.
7. Booted up in Rom and noticed a partial root.
8. Then flashed Chainfire 5.6 kernel via pc odin.
9. Used remove triangle apk ( succeded in removing triangle)
10. But still that partial root.
11. Then tried to flash cwm.zip via "update from sdcard" mode in CWM but failed to do so. It says no update file available.
12. Then installed the same file via "Select zip from sd card".
13. Did succeded in installing by this method then tried to install SU installer but CWM hangs at "unmounting system".
14. And guess what that fu**ing partial root.
I have tried many times the same methods but still no benefit.
I upgraded using Mobile Odin and I have full root.
When MO loads files, replace kernel with CF-Root 5.6 or any other safe kernel.
Hope it helps.
----
Edit
----
Read this post before you continue.
As CF said Beware: update.zip's can trigger the bug if they use "format" commands!
This kernel is safe to restore backups and to perform wipe data and factory reset but do not use it to flash custom roms.
Boy124 said:
I upgraded using Mobile Odin and I have full root.
When MO loads files, replace kernel with CF-Root 5.6 or any other safe kernel.
Hope it helps.
----
Edit
----
Read this post before you continue.
As CF said Beware: update.zip's can trigger the bug if they use "format" commands!
This kernel is safe to restore backups and to perform wipe data and factory reset but do not use it to flash custom roms.
Click to expand...
Click to collapse
didnt helped tried it earlier...cud u tell how u upgraded using odin
hardkaurr said:
didnt helped tried it earlier...cud u tell how u upgraded using odin
Click to expand...
Click to collapse
I flashed KKA ROM, rooted it.
Then flashed LPY with CF-Root 5.6 LPY kernel.
Tick preroot and inject SU.
Boy124 said:
I flashed KKA ROM, rooted it.
Then flashed LPY with CF-Root 5.6 LPY kernel.
Tick preroot and inject SU.
Click to expand...
Click to collapse
but I want kingdroid ehich can only be flashed via cwm not odin
hardkaurr said:
but I want kingdroid ehich can only be flashed via cwm not odin
Click to expand...
Click to collapse
Flash it with safe kernel.
And try this http://forum.xda-developers.com/showpost.php?p=27221642&postcount=2241
I flashed prerooted stock gb via PC Odin, then flashed cf root via PC Odin. The through cwm I flash abyss note 4.2, then I flash the rom I want and I have full root
Sent from my Galaxy Note running LiquidSmooth
carbonassassin said:
I flashed prerooted stock gb via PC Odin, then flashed cf root via PC Odin. The through cwm I flash abyss note 4.2, then I flash the rom I want and I have full root
Sent from my Galaxy Note running LiquidSmooth
Click to expand...
Click to collapse
even i did this but i never flashed cf root via pc odin earlier. let me give it a try will tell u. ...
Success
Finally succeded in rooting ICS thanks to robbie hood and his method given in Alliance rom forum.
I already have a custom rom installed but I'm going to sell my Note... So I want to make it official but rooted...
I cant find any thread for it. A near official rom I found is CleaNote rom but I want a fully offcial rom like on Samfirmware but rooted.
I dont want to download via samfirmware because then I will have to though whole process of rooting again and then triangle removing mod etc...
its just a one step method for rooting ics these days.
Download the rom of your choice
download philz kernel as per rom
boot into recovery
install zip
done
you have root, and cwm and safe kernel
No triangle, no counter
There is a prerooted gb rom but i dont think there is a prerooted ics cause its not safe to stay stock after you get rooted
So as nokiamodeln91 said,download a stock ics rom and flash philz kernel
Thanks guys!
I hv downloaded the Stock rom from Samfirmware in ZIP format... As my phone is rooted, can I use mobile ODIN to flash that zip and Philz Kernel OR should I use cwm recovery to flash both.... (Im asking ths bec what if the phone reboots immediately after installing rom via cwm.... it wont gimme a chance to install philz after rebooting because stock rom also installs stock kernel)
Use pc odin to install the stock rom and then philz from recovery... Or u can use mobile odin aslo. If u already rooted, mobile odin may give the option to inject su, and u may have root as well after the rom install.
cwm u can't flash stock
You cant use cwm to flash a stock rom
You can use either pc odin or mobile odin to do so
Hi all..
My friend encountered this issue recently..
where the phone cannot be started and the firmware error appears.
I've tried several attemps on recovering it back.
1. it cannot go into stock recovery mode
2. it can go into download mode
so i've tried to flash thru odin:
1) philztouch custom recovery
2) stock rom jelly bean from sammobile.com
both attemps failed.
so my next move is to connect thru kies.
it failed again as it does not detect the device to do the emergency phone recovery.
so now im in the idea of trying to flash custom recovery again and a custom rom. do not know whether it works or not, but ill try.
any other solutions/ideas?
Thanks.
Where does the stock JB flash fail? Odin logs? Which version of philz kernel did you try to flash?
nokiamodeln91 said:
Where does the stock JB flash fail? Odin logs? Which version of philz kernel did you try to flash?
Click to expand...
Click to collapse
i cannot remember but it seems that when it comes to the "KERNEL" status appears in the odin box, it took a while n then fails.
PhilZ-cwm6-XXLT9-ORA-5.08.5.tar.md5
this is what i used to flash the philztouch.
any ideas?
cucurr said:
i cannot remember but it seems that when it comes to the "KERNEL" status appears in the odin box, it took a while n then fails.
PhilZ-cwm6-XXLT9-ORA-5.08.5.tar.md5
this is what i used to flash the philztouch.
any ideas?
Click to expand...
Click to collapse
If you cannot get the rom to flash.... You have to go through the philz kernel using odin.. Try to flash philz kernel xxlta version again using odin. Make sure you remove the battery for a couple of seconds. Then boot into odin mode. Use main USB ports and genuine USB cable.