Q&A for [ROM][5.0][Official] CyanogenMod 12.0
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.0][Official] CyanogenMod 12.0. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Issue with updating to CM12
So I used to have my droid bionic in official CM11 and i had everything set up.
On weekly basis, CM would tell me that there is a new update and I should update to that.
I never backed up my stuff (never needed to) and I clicked on update to the newest rom for CM
I never checked its number and just hit update.
phone goes into limbo mode and I realize its cause its updating to CM12.
I still had Safestrap 3.65 and looking at some threads, i updated to 3.75 and tried again
Still nothing. so whenever I boot into rom-slot-1, it just shows blank screen.
I can install other roms and it will work fine
but I want the official cm that i had, the unofficial ones arent as battery conserving as CM.
can someone help me install cm11 or cm12?
Edit: I got CM11 to work by downgrading to stable version 10.2 and upgrading.
The phone still doesnt want to update to cm12
You can't upgrade to cm12 it must be done with a fresh install to a clean slot. I restored my apps with titanium backup and all went well. Good luck.
DrJwC said:
You can't upgrade to cm12 it must be done with a fresh install to a clean slot. I restored my apps with titanium backup and all went well. Good luck.
Click to expand...
Click to collapse
Originally, it failed because I tried to do an upgrade.
I had to wipe my device cause there was no other way to go back.
Now when I do clean install, it still fails.
(clean install for cm 11 fails for me as well, only thing that works is cm10 and upgrading to cm11 from there.)
cm12 droid bionic [targa]
Ive been flashing roms for years, never usually input, just wait and get better ones, before cm12 i was using cm11 with jbx kernel and i thought it was impressive, I managed to flash jbx kernel and had it stable for a hour, then i cant tell you what happened but it destablized, but i managed to run some benchmarks to see what was on the inside of lollipop...........
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
cm12 lollipop 1.3 ghz
cm11 1.3ghz
is this runtime from use of selinux, im having a hard time understanding where this is coming from.....
im not sure why the images arnt loading, but if you copy the url and paste it they do...................
but im having the same issues as everyone else, stock kernel, gitchy, it seems slow at randomly accessing rom drive, slow switching apps, but these benchmarks are very promising!
keep up the awesome work guys!
Is a new clean slot (new safestrap 3.75) enough for CM12? Previous rom 4.4.4 PACman RC1.
Is an advanced wipe needed? If so which options?
blueberry.sky said:
Is a new clean slot (new safestrap 3.75) enough for CM12? Previous rom 4.4.4 PACman RC1.
Is an advanced wipe needed? If so which options?
Click to expand...
Click to collapse
Ummm, well I don't remember the version numbers, but use the newest safestrap with selinux support. I do recommend A wipe cause u never know if it will boot loop, you can try it if you want, that's kinda the point of safestrap, and I dunno what a 4.4 pacman is but I recommend and only use cm , hope this helped...
A year or 2 ago I had a guy flash\root my bionic to 3g to work on Page plus after verizon took my unlimited data away.
This week I ordered a new 4G lte SIM card and added a 5.0.2 Lollipop ROM (CM 12- 2/19) to the phone.
I called PP and asked them to swap out my SIM so that I could start using 4G LTE again on their plans.
Now my phone works and I can change settings but...
In 4.1.2 Jellybean, I can see the 4G LTE icon but cannot use cellur service or data - no phone call.(No bars)
On 5.0.2 Lollipop CM 12 ROM I can only see 4 bars or service strength but no 4G LTE icon.
No Data or phone call capability...
The old Verizon SIM card doesn't work anymore after activation now and so neither of my SIM cards are either working or the wrong setting is in the phone somewhere.
PP is of no help\use.
Does anyone have an idea of what I can do to get this thing working again?
Thanks in advance.
помогите
helping to establish the firmware then Gapps 5.1 and then Ruth as in 5.0 but after installing Ruth reboot the phone is loaded debt and bodies are not loaded into the firmware Ruth does not work at all with the help of Ruth firmware please how to get it is not
---------- Post added at 07:39 PM ---------- Previous post was at 07:35 PM ----------
как установить рут для прошивки 5.0 и 5.1 они на последних сборках рут не работает телефон не загружается весит на логе прошивки а если без рут прав прошивка загружается но без рут я не могу помогите дайте решения прошу вас
Are you saying you managed to flash JBX on CM12?
Invisible cursor.
Attaching a mouse via lapdock or usb results in an invisible mouse cursor. The mouse functions, and can click on anything, but the cursor itself is invisible. While investigating the problem, I think I determined that it was made invisible in CM12 as a workaround for spens for Galaxy Notes. I tried changing the cursor in framework_res.apk but couldn't get it to work.
Any workarounds I could try or could it be fixed in the rom?
Thanks.
Related
Q&A for [ROM][4.4.x] SlimKat - P880 - Optimus X4HD [Build 8.1 ][UNOFFICIAL]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][4.4.x] SlimKat - P880 - Optimus X4HD [Build 8.1 ][UNOFFICIAL]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Build 8.9 won't import contacts from SIM
As title says. It boots and works great, but I can't import my contacts from my SIM card. I put the card back in my old phone, and it reads it just fine. Not sure if the stock ROM for the HD was able to do it since I flashed the phone as soon as I got it going.
It's a great ROM otherwise, though. Love the simplicity.
Great rom
Great ROM! Thanks!
Not the most smooth, but so far is working good. I was having serious delays when trying to turn de screen on, or on incoming calls. I don't know if there is a cause-effect, but after i installed greenify, the delay is shorter.
It is a great ROM. I still can't post in the main thread because I'm a newb, but I wanted to post a screenshot of what a combo of SlimKat and Werewolf kernel can do.
This is SlimKat 8.9 and Werewolf 009.
Links to each one if you're a newb like me.
Kernel
ROM
What can they do?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
As a comparison, with the stock 4.1.3 ROM from LG and stock kernel, it was getting 14000-15000, so that's quite a difference. Battery life is also loads better especially when asleep.
Still would like to know why it can't read my SIM contacts. I hope it sees the SIM card. I haven't tried any calls or data on the phone since flashing it. Have to wait and see.
I'm having issues with the camera too. It's not just the still camera either. The video camera lags sometimes too. Just stops updating the screen and then picks up again later. Also the display breaks up when changing orientation in camera mode.
Just tried 8.8 and 8.6.1, and both have the issues. Not sure how to proceed. Is there a version that doesn't have camera issues? Not sure how this went several versions without getting noticed. It's painfully obvious that there's a problem. Just snapping a photo lags like crazy, and the video camera issue punches you in the face.
---------- Post added at 08:50 PM ---------- Previous post was at 08:33 PM ----------
OK. Just saw that this is a known issue, but no fix has been posted. Sorry. I should have read more before I posted.
Updating LG P880 4xhd to 4.4.X
Hello Everyone,
I am a new user here, I have been using xda websites since sometime and finally registered it. I find it more useful and helpful as there is a lot of learning and cost saving here .. Anyway coming to the question..
I tried to update my device as its mentioned in this thread
http://forum.xda-developers.com/showthread.php?t=2583176
But I don't know why my phone bricked while I was doing it.
1. I had my phone rooted
2. Boot loader Unlocked
3. custom rom/gapps downloaded and pasted on the device
4. cwm updated using rom manager
But when I went to boot recovery I got some .image error message... Thanks to kdz flashing and LG flashtool that I got my phone back and some how upgraded to 4.1.2 as it was 4.0.3 before ..
So my request is can someone please post the exact procedure detailed in step by step so that a beginner like me can understands well. Or if you can provide a kdz file that is having OS version 4.4.X..
Sorry for my bad English
Thanks everyone for your posts and replies.
You missed/failed to do point 2.
very happy
I'm using the Mourta-Kernel 8.20 to 3.4 and it works great. Sometimes he throws to consume battery with some wakelocks do not know what it is, but it seems the perfect combination for this rom. On 10 points, 9 points
merry christmas
Where is the link of rom????
please send me the link>>
Could somebody upload newest 9.0 build again, becouse goo.im is no longer alive and I can't find it anywhere else? Thanks
Q&A for [ROM] CM 11.0 (Android 4.4) for AtrixHD
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] CM 11.0 (Android 4.4) for AtrixHD. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Hey Folks,
Just thought I'd share my experience with CM12 for our beloved MB886. It was nothing short of a disaster. It keep crashing on me when I'd push it. Took 3 attempts to install a large app like Facebook. My first attempt had me do as CM suggests by migrating from CM11 to CM12. I installed both the ROM and GAPPS. Any app not compatible with Lollipop didn't show or work crash. I got a lot of stopped working errors.
So, it tried a factory wipe and installed again, same result. Installing new apps constantly caused it to crash for me. I upgraded from the 2/22 nightly to the 2/23 version same result. One last ditch effort using today's 2/24 fare no better.
Some other things I noticed:
1. Camera no longer allows you to save direct to your SD card (bummer given the space challenges we have with this device)
2. There's a move to SD card function, though I couldn't find where it was being stored, however it does show space on the SD card is being used when you look at storage in the settings. Also home screen icons to SD apps are lost on reboot. You're better off with Link2SD which saves the icons on your home screen. Again, another useful feature given the small memory we have.
3. Music player keeps crashing
4. Performance overall was faster till I'd get going then it'd crawl, freeze, and reboot on me
For now I reverted back to CM12 M12 and will make another attempt at Lollipop down the road. Hopefully there will be some M-Releases by then.
Cheers.
Good review.
Sent from my MB886 using Tapatalk
skarna said:
Hey Folks,
Just thought I'd share my experience with CM12 for our beloved MB886. It was nothing short of a disaster. It keep crashing on me when I'd push it. Took 3 attempts to install a large app like Facebook. My first attempt had me do as CM suggests by migrating from CM11 to CM12. I installed both the ROM and GAPPS. Any app not compatible with Lollipop didn't show or work crash. I got a lot of stopped working errors.
So, it tried a factory wipe and installed again, same result. Installing new apps constantly caused it to crash for me. I upgraded from the 2/22 nightly to the 2/23 version same result. One last ditch effort using today's 2/24 fare no better.
Some other things I noticed:
1. Camera no longer allows you to save direct to your SD card (bummer given the space challenges we have with this device)
2. There's a move to SD card function, though I couldn't find where it was being stored, however it does show space on the SD card is being used when you look at storage in the settings. Also home screen icons to SD apps are lost on reboot. You're better off with Link2SD which saves the icons on your home screen. Again, another useful feature given the small memory we have.
3. Music player keeps crashing
4. Performance overall was faster till I'd get going then it'd crawl, freeze, and reboot on me
For now I reverted back to CM12 M12 and will make another attempt at Lollipop down the road. Hopefully there will be some M-Releases by then.
Cheers.
Click to expand...
Click to collapse
It should be noted that the experience of one user does not necessarily reflect the experience of all users. While some users may experience disasterous results, others do not.
Sent from my RAZR-ATRIX HD using XDA Free mobile app
BLE Not Enable
Just for information. On my ATRIX HD this ROM did not enable BLE. Flashed AOSP and everything went back.
AOSP? What do you mean by AOSP? You have a link??
Sent from my ATRIX HD using XDA Free mobile app
anyone know a gapp package that has an older version of google search? like google search 3.6 or less?
Anyone know of there's an update for this build?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my ATRIX HD using Tapatalk
With mcp1 8-9 build
See below for screenshot
Antutu
Q&A for [MANUAL OTA] VS980 39A Lollipop (No root)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [MANUAL OTA] VS980 39A Lollipop (No root). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
This might sound like a really silly question but it's directed at people who've successfully installed this on their VS980.
Is there an option for 'USB tethering' in this version (The option that allows you to tether your phone's wifi connection to the PC through a usb cable). I've seen it in pretty much every other android device but the verizon G2 only allows me to tether my data connection and not a WiFi connection. Could anyone let me know please ?
Skyrus5150 said:
This might sound like a really silly question but it's directed at people who've successfully installed this on their VS980.
Is there an option for 'USB tethering' in this version (The option that allows you to tether your phone's wifi connection to the PC through a usb cable). I've seen it in pretty much every other android device but the verizon G2 only allows me to tether my data connection and not a WiFi connection. Could anyone let me know please ?
Click to expand...
Click to collapse
Yes...,,,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can someone post a changelog for 28a or what the difference are between 27a and 28a. Is there new features, ect..
tsjanda said:
Can someone post a changelog for 28a or what the difference are between 27a and 28a. Is there new features, ect..
Click to expand...
Click to collapse
It's not official so vzw hasn't posted anything.
Video call
Sorry if this has been asked and answered already but I haven't seen it. I am running this on my VS980 but haven't been able to get video call to work. Is anyone else having this problem?
Is there a method to unroot your phone once you completed installing lollipop?
27a to 28a
quick question, i was following the instructions and when i reached the part where i should install the 27a to 28a through adb after entering the two commands my phone restarted but i didnt see anything happen. it just booted right up i got a notification that update was successful but when i checked the software version is still saying 27a.
so should i retry again or was that normal
DigitalHokage said:
quick question, i was following the instructions and when i reached the part where i should install the 27a to 28a through adb after entering the two commands my phone restarted but i didnt see anything happen. it just booted right up i got a notification that update was successful but when i checked the software version is still saying 27a.
so should i retry again or was that normal
Click to expand...
Click to collapse
I would retry again, the 2nd update took much longer to install than the 1st one. Then it had to optimize 177 some odd apps which took awhile as well.
Conechaser said:
I would retry again, the 2nd update took much longer to install than the 1st one. Then it had to optimize 177 some odd apps which took awhile as well.
Click to expand...
Click to collapse
tried again and its the same result
DigitalHokage said:
tried again and its the same result
Click to expand...
Click to collapse
How big is the 2nd file? Maybe you got a bad download or something.
Conechaser said:
How big is the 2nd file? Maybe you got a bad download or something.
Click to expand...
Click to collapse
i managed to get the update working but know i screwed up while trying to update to 39a im now stuck booting into twrp and i also cant go into download mode and i dont know what to do
edit- got out of booting to twrp...but know i wantto know if twrp will interfere again when i try to update to 39a
DigitalHokage said:
i managed to get the update working but know i screwed up while trying to update to 39a im now stuck booting into twrp and i also cant go into download mode and i dont know what to do
Click to expand...
Click to collapse
Go here to get out of bootloop. Don't ever run an ota with twrp.
http://forum.xda-developers.com/showthread.php?t=2451696
MicroMod777 said:
Go here to get out of bootloop. Don't ever run an ota with twrp.
http://forum.xda-developers.com/showthread.php?t=2451696
Click to expand...
Click to collapse
yea found that link and got out of hell so how do i get rid of twrp im so close to lollipop damn it lol
DigitalHokage said:
yea found that link and got out of hell so how do i get rid of twrp im so close to lollipop damn it lol
Click to expand...
Click to collapse
Follow steps in OP.
MicroMod777 said:
Follow steps in OP.
Click to expand...
Click to collapse
so that means i have to start from 27a and work my way up with out twrp this time
DigitalHokage said:
so that means i have to start from 27a and work my way up with out twrp this time
Click to expand...
Click to collapse
Yes sir. Or untill June when the ota rolls out.
MicroMod777 said:
Yes sir. Or untill June when the ota rolls out.
Click to expand...
Click to collapse
thanks for your help, im not on verizon so i cant receive ota's... started from beginning now im finally on lollipop now...boy did i learn a lot during this process
I'm on this ota and rooted with the new exploit. Is there a way to add recovery so I can flash XDABBEB's updated bootloader and kernal? Thanks in advance!
Sent from my VS980 4G using Tapatalk
I'm running cm 11 ....Went back to that cause I got lost some how...What do I need to do other than what's in the op to run this ?....I switched to nexus but back to vs980 and think I have missed a lot....
Sent from my Nexus 6 using Tapatalk
---------- Post added at 07:45 PM ---------- Previous post was at 07:39 PM ----------
Edit:::: I switched to cloudy g3 2.1
Sent from my Nexus 6 using Tapatalk
All code changes needed for N Preview have been rolled into the BETA releases starting v2.71 BETA. This thread is now closed. If a new N Preview release comes out, or N Final is released, this thread may be re-opened. For now, proceed to the BETA thread!
OLD CONTENT
This thread is dedicated to SuperSU on N Preview. With the first few releases I'm not merging it directly with the BETA branch, as there have been some invasive changes under the hood regarding SELinux handling, and there should be a little bit more testing done before going there. Still, I expect this to be done within the next week or two.
I've only had the chance to test on the 5X so far, so there is some risk involved. If you're not comfortable reflashing everything due to bootloops, crashes, etc, wait for others to play the guinea pig.
RC-SuperSU-v2.70-20160314191951.zip
As this hasn't been merged with the BETA branch yet, I'm not updating the main CF-Auto-Root distribution either. But as TWRP isn't working yet on all N Preview devices either, attached are test CFAR versions.
Note that you are also welcome to flash this SuperSU version on pre-N firmwares, and report back if everything still works as expected.
If you have tried other methods of rooting, you need to at least flash back your stock boot.img before flashing SuperSU.
Depending on how much you have played around, reflashing /system may also be a wise move.
If you came from SuperSU v2.69, you need to reflash via TWRP or CFAR. Installing just the APK and updating binaries will not fix all the issues!
--- reserved ---
--- more reserved ---
Im using now phh should i flash over it?
Sent from my Nexus 6 using Tapatalk
Thanks Chainfire , good job, downloading
When trying to flash CF-Auto for Shamu using windows-fastboot i get a double oem unlock pop up on my phone after i click the first yes unlock although im already oem unlocked it will then pop right back up. to which my bootloader will then freeze for a few min then come responseive again but nothing was flashed i would receive a error while looking at the .bat it has the oem unlock twice in the codeing is this on purpose ?
Nexus only?
That's quick, thanks for all your contribution to this.
hamada samir said:
Nexus only?
Click to expand...
Click to collapse
For sure Nexus only, N preview is not available on any other phones.
Techno Peter said:
For sure Nexus only, N preview is not available on any other phones.
Click to expand...
Click to collapse
Thanks my brother ❤
This version is working fine on my Nexus 6P with MM MHC19I.
Ohh yeah. Back in business
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Nexus 6 using Tapatalk
N6, RC-SuperSU-v2.69-20160313161431.zip through TWRP 3.0.0.1 seems OK. Testing in progress.
How are ya'll flashing? I can't get any version of TWRP to run on my N9, it just keeps restarting recovery, and I don't know what else I would try.
Can i flash it over phh cause i already root?
Sent from my Nexus 6 using Tapatalk
N6P
Worked on N6P, NPC56P
Thank You
Chainfire said:
This thread is dedicated to SuperSU on N Preview. With the first few releases I'm not merging it directly with the BETA branch, as there have been some invasive changes under the hood regarding SELinux handling, and there should be a little bit more testing done before going there. Still, I expect this to be done within the next week or two.
I've only had the chance to test on the 5X so far, so there is some risk involved. If you're not comfortable reflashing everything due to bootloops, crashes, etc, wait for others to play the guinea pig.
RC-SuperSU-v2.69-20160313161431.zip
As this hasn't been merged with the BETA branch yet, I'm not updating the main CF-Auto-Root distribution either. But as TWRP isn't working yet on all N Preview devices either, attached are test CFAR versions.
Note that you are also welcome to flash this SuperSU version on pre-N firmwares, and report back if everything still works as expected.
If you have tried other methods of rooting, you need to at least flash back your stock boot.img before flashing SuperSU. Depending on how much you have played around, reflashing /system may also be a wise move.
Click to expand...
Click to collapse
Thank you @Chainfire! Does this root method reside in the System Partition, or is it Systemless. Also, do we need to type in adb commands in TWRP before installing to force Systemless installation?
Thank you again:laugh:
Hey Chainfire!
Just a few question again from one of your supporters
Is it possible to receive OTA's after rooting N with your method? Or is their another way (like for example via your app "Flashfire")?
And can you flash new preview builds over a rooted build?
Thank you in advance
Help The Peace said:
Hey Chainfire!
Just a few question again from one of your supporters
Is it possible to receive OTA's after rooting N with your method? Or is their another way (like for example via your app "Flashfire")?
And can you flash new preview builds over a rooted build?
Thank you in advance
Click to expand...
Click to collapse
Android N OTA`s - it`s full system images, so it doesn't matter your device rooted or not.
Kameechewa said:
How are ya'll flashing? I can't get any version of TWRP to run on my N9, it just keeps restarting recovery, and I don't know what else I would try.
Click to expand...
Click to collapse
unzip and run root-windows.bat, or mac or linux sh file, depends on you OS.
ohad129 said:
Can i flash it over phh cause i already root?
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Read first post
Ok so the issue of Ting LTE not working with CM13 ROMS has be bothering me for sometime now but this past weekend I finally found a fix for it.
Just as a side note the ROM I used with this fix was, OctOs Oct-MM R2 but in theory it should work with all CM13 ROMS for the L720. Also the tool I used is NOT MY WORK! It is the work of xda user, Deega and Buzbe2. I take no credit.
This fix requires the MVNO Slayer tool by Deega and Buzbe2 to work.
http://forum.xda-developers.com/showpost.php?p=65917850&postcount=30
These are the exact steps I took to flash the ROM and get data up and running.
1. Flash the CM13 ROM in twrp. (May work with CWM but i have not tested)
2. Without rebooting flash Gapps.
3. Reboot the device.
4. Once the device boots set up the device and wait for it to connect the cell tower. At this time you will not have data of any kind.
5. Reboot to recovery once more and flash MVNO Slayer. You must flash Buzbez2's version if you want Ting LTE.
6. Select the MVNO you wish and reboot.
7. Enjoy fully working LTE.
Screenshot of working Ting LTE on OctOS Oct-MM R2:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Worked for me, thanks!
I started at step 5 because I have been using CM13 for a few days already. My cellular network said “Sprint” and I could make and receive calls and texts but did not have LTE. Then I did steps 5 and 6 in this post and now my cellular network says “Ting” and LTE is working.
Data
Just out of curiosity,
Will this work with boost mobile phones? Sorry if it seems like a dumb question but I am new to all of this and started learning about ROMs last December.
Also will this work with Resurrection Remix 7.1 rom? I dont really know if it is CM13 or not?
Zer
ZerxeZ said:
Just out of curiosity,
Will this work with boost mobile phones? Sorry if it seems like a dumb question but I am new to all of this and started learning about ROMs last December.
Also will this work with Resurrection Remix 7.1 rom? I dont really know if it is CM13 or not?
Zer
Click to expand...
Click to collapse
Welcome to the world of Android. Yes this should work with Boot Mobile and in theory it will work on Resurrection Remix even though it's not cm 13 but I've not personally tested it
andyman2017 said:
Welcome to the world of Android. Yes this should work with Boot Mobile and in theory it will work on Resurrection Remix even though it's not cm 13 but I've not personally tested it
Click to expand...
Click to collapse
Could you please test it?!? I am actually testing it with Octo-N and it doesn't seem to be working. Thank you in advance
I just installed this for OctO-N on my sph720t. In SIM status it still says Sprint. I am a Ting user. Should I clear the cache or dalvik before installing the MVNOBuzbee zip?
How do you chose your mvno in step 6? Im still new to android modding
ScottaBlast said:
How do you chose your mvno in step 6? Im still new to android modding
Click to expand...
Click to collapse
When you begin the installation a pop up on TWRP will appear and give you multiple options of cellular company towers and when you pick it, it will continue the installation of MVNO.
ZerxeZ said:
When you begin the installation a pop up on TWRP will appear and give you multiple options of cellular company towers and when you pick it, it will continue the installation of MVNO.
Click to expand...
Click to collapse
That's weird when I did that no pop up popped up. I'll make sure TWRP is up to date and try again.
---------- Post added at 12:41 AM ---------- Previous post was at 12:39 AM ----------
ZerxeZ said:
When you begin the installation a pop up on TWRP will appear and give you multiple options of cellular company towers and when you pick it, it will continue the installation of MVNO.
Click to expand...
Click to collapse
This might be something bigger than just this file too. I remember the aroma version of Gapps not working for me, and that uses a gui to install the individual apps
ScottaBlast said:
That's weird when I did that no pop up popped up. I'll make sure TWRP is up to date and try again.
---------- Post added at 12:41 AM ---------- Previous post was at 12:39 AM ----------
This might be something bigger than just this file too. I remember the aroma version of Gapps not working for me, and that uses a gui to install the individual apps
Click to expand...
Click to collapse
Try also getting the latest gapps because I tried a new ROM and it wouldn't work on my older gapps till I updated.
trying to install mvno slavyer made twrp freeze. It then rebooted into my custom rom without showing a menu. According to this some of the new TWRPs have issues with the aroma installer, I'll try an old one https://forum.xda-developers.com/mo...hable-lte-fix-moto-e-6-x-boost-t3290719/page6
What phone and ROM are you trying to do and what android version u gonna use?
THANK YOU
Alright so I found out the issue and fixed it. My current version of TWRP didn't work with aroma installers. I regressed to version 3.0, did the steps, and now it works. Thanks man, I've been working on this for like a week
---------- Post added at 04:27 AM ---------- Previous post was at 04:25 AM ----------
ZerxeZ said:
What phone and ROM are you trying to do and what android version u gonna use?
Click to expand...
Click to collapse
I just solved this but since you're curious
SM - G900P (Samsung Galaxy S5)
They'll both be on nougat
Resurrection Remix or Cyanogen 14.1, gonna go install the latter and see how it fares (I know there's Lineage now but last I checked there were only nightly builds for my phone, not stable)
Oh in that case, I want to suggest a ROM that I'm using. It is amazing and runs better but RR has amazing customization unlike JDCteam LineageOS. But it is highly optimized.
Yeah I'm currently using Lineage, had too many issues with RR. However, one issue im still having is the inability to send text messages. Everything else works, but I just can't send them. I've been looking for other fixes, but I can't find any specifically for ting. Have you guys had any luck?