Right,
I have been trying to mount system as RW so i can install busybox - ( as busybox install is failing saying "device is not nand unlocked or unable to remount")
I have s-off and root (the superuser app is there and rootchecker says so)
so first i ran command
mount -o rw,remount /dev/block/mmcblk0p2 /system
Click to expand...
Click to collapse
and this was failing saying
mount: Permission denied
Click to expand...
Click to collapse
so i tried
adb remount
Click to expand...
Click to collapse
then i check cat /proc/mounts and got
/dev/block/mmcblk0p25 /system ext4 rw,relatime,barrier=1,data=ordered 0 0
Click to expand...
Click to collapse
so i assumed all was ok ...
however ... in terminal emulator on the phone i try simple command "ls" or "mount" and i get permission denied again (from su)
terminal emulator has root privileges
but still busybox wont install saying the SAME error.
all this stemmed from trying to install MetaMorph and it saying "some files could not be installed. Check /system for space"
i have 300mb of space in /system - after some research i found it could be because system isnt RW ... and thats where im at now ..
So, any help would be appreciated
Have you tried
adb shell
su
Did su from terminal change cursor and request super user permission?
Sent from my HTC Desire S using XDA Premium App
In terminal emulator on phone it changed from a
$ to # after su
In terminal on my desktop its always a #
Has anyone been able to successfully install Busybox after rooting? I grabbed it from the market but the install FCs.
For the install I picked v1.19.0 installing to /system/xbin.
The requirements page states the following are necessary:
A fully rooted device
A device that is nand unlocked
A device that does NOT have any sort of write protection on the file system
A ROM that supports installing Busybox to partitions that are NOT re-written on every boot
At least 1600KB free in your chosen installation path
Are we missing #2 on req. list even though we can fully root the device?
Yes busybox does work. Im wondering if that app is not remounting /system as writabe.
Try this, from adb or a terminal emulator. Type su . Then mount -o remount,rw /system
then try to run the app again.
eww245 said:
Try this, from adb or a terminal emulator. Type su . Then mount -o remount,rw /system
then try to run the app again.
Click to expand...
Click to collapse
Thanks but this command does not seem to have complete syntax. In Terminal, after elevating to su, I run that and am prompted with "Usage: mount....etc".
g3m1n1 said:
Thanks but this command does not seem to have complete syntax. In Terminal, after elevating to su, I run that and am prompted with "Usage: mount....etc".
Click to expand...
Click to collapse
Well that was the busybox way. lol
mount -o remount,rw /dev/block/system /system
Thanks, I think that did the trick.
I have a rooted Nexus 7 running the Eclipse custom ROM. Somehow, I cannot mount file system for R/W using "mount/system (rw/ro)" app nor using ADB method. I'm not getting any error from the mount/remount, but I still read only file warnings. I don't have any problem getting the R/W right on Nexus phone using the same way I described. I'll appreciate your help.
Code:
$ su
# mount -o remount, rw /system
???
korockinout13 said:
Code:
$ su
# mount -o remount, rw /system
???
Click to expand...
Click to collapse
I have no problem executing commands you listed, but read only.
Device is pre-rooted, but only lets you do stuff via terminal. I didn't find a way to install Superuser/busybox on Mac, so I decided to make a simple guide. Took me all of 3min to complete, well since I already had the sdk and everything else installed.
You'll need this Superuser.apk, su binary and busybox.apk, dL the files from here http://d-h.st/BBk, once you have the files installed and launch Superuser it will ask you to update the binary, just click yes. Place the 3 files in your sdk/platform-tools folder.
Open Terminal cd sdk/platform-tools
On your Desktop go to Go…Go to Folder and type ~/.android, open adb_usb.ini and add 0x2836 to that file, save and close.
To verify it's listed:
./adb kill-server
echo 0x2836
./adb start-server
./adb devices
Your device should be listed here. If you want wireless adb access so you're not always hooked up to the console do the following, make sure your device is still connected via usb:
./adb tcpip 5555
unplug console
./adb connect xxx.xxx.xxx.xxx (this is the ip of your console, this is listed under manage…system…console info, should be the second line)
You're set, now you can install apps wirelessly to your OUYA console. You need to make the console read/write to do this do the following
./adb shell
su
mount -o rw,remount -t ext4 /dev/block/platform/sdhci-tegra.3/by-name/APP
mount -o rw,remount -t ext4 /dev/block/platform/sdhci-tegra.3/by-name/UDA
mount -o rw,remount -t ext4 /dev/block/platform/sdhci-tegra.3/by-name/CAC
Now we will install su binary, superuser and busybox
./adb push su/system/bin/su /sdcard/su
./adb shell
su
cat /sdcard/su > /system/xbin/su
ln -s /system/xbin/su /system/bin/su
chmod 6755 /system/xbin/su
exit
exit
./adb install com.koushikdutta.superuser.apk
./adb install stericson.busybox.apk
Should be up and running, if this helped you please thank me or donate a couple bucks
You rock!
I was at this for a while before I found your post. I'm on windows, but this is the only thread I could find that had anything useful Mind if I share this around on other forums?
Just link them back, steps are almost identical for Windows. Just need to remove the ./ from the adb commands
Sent from my HTC One using Tapatalk 4 Beta
WinDroidGuy said:
Device is pre-rooted, but only lets you do stuff via terminal. I didn't find a way to install Superuser/busybox on Mac, so I decided to make a simple guide. Took me all of 3min to complete, well since I already had the sdk and everything else installed.
You'll need this Superuser.apk, su binary and busybox.apk, dL the files from here http://d-h.st/BBk, once you have the files installed and launch Superuser it will ask you to update the binary, just click yes. Place the 3 files in your sdk/platform-tools folder.
Open Terminal cd sdk/platform-tools
On your Desktop go to Go…Go to Folder and type ~/.android, open adb_usb.ini and add 0x2836 to that file, save and close.
To verify it's listed:
./adb kill-server
echo 0x2836
./adb start-server
./adb devices
Your device should be listed here. If you want wireless adb access so you're not always hooked up to the console do the following, make sure your device is still connected via usb:
./adb tcpip 5555
unplug console
./adb connect xxx.xxx.xxx.xxx (this is the ip of your console, this is listed under manage…system…console info, should be the second line)
You're set, now you can install apps wirelessly to your OUYA console. You need to make the console read/write to do this do the following
./adb shell
su
mount -o rw,remount -t ext4 /dev/block/platform/sdhci-tegra.3/by-name/APP
mount -o rw,remount -t ext4 /dev/block/platform/sdhci-tegra.3/by-name/UDA
mount -o rw,remount -t ext4 /dev/block/platform/sdhci-tegra.3/by-name/CAC
Now we will install su binary, superuser and busybox
./adb push su/system/bin/su /sdcard/su
./adb shell
su
cat /sdcard/su > /system/bin/su
cat /sdcard/su > /system/xbin/su
exit
exit
./adb install com.koushikdutta.superuser.apk
./adb install stericson.busybox.apk
Should be up and running, if this helped you please thank me or donate a couple bucks
Click to expand...
Click to collapse
It's pure luck that this works. There's several things wrong with it.
There's no reason to have two copies of su. There should only be one, and at most have the other be a symlink.
the su binary should be chmodded '6755'.
It works because piping the contents of a file to another file usually leaves the permissions intact. So, sort of works - it leaves a broken copy of su in /system/bin and a luckily working one in /system/xbin.
So, tl;dr, the guide should be:
Code:
./adb push su/system/bin/su /sdcard/su
./adb shell
su
cat /sdcard/su > /system/xbin/su
ln -s /system/xbin/su /system/bin/su
chmod 6755 /system/xbin/su
exit
exit
./adb install com.koushikdutta.superuser.apk
rayman said:
It's pure luck that this works. There's several things wrong with it.
There's no reason to have two copies of su. There should only be one, and at most have the other be a symlink.
the su binary should be chmodded '6755'.
It works because piping the contents of a file to another file usually leaves the permissions intact. So, sort of works - it leaves a broken copy of su in /system/bin and a luckily working one in /system/xbin.
So, tl;dr, the guide should be:
Code:
./adb push su/system/bin/su /sdcard/su
./adb shell
su
cat /sdcard/su > /system/xbin/su
ln -s /system/xbin/su /system/bin/su
chmod 6755 /system/xbin/su
exit
exit
./adb install com.koushikdutta.superuser.apk
Click to expand...
Click to collapse
Thanks, this was my first time doing anything like this...figured I'd try to hack together something from other guides, since I didn't see very many people with the device yet. I will change it now
WinDroidGuy said:
mount -o rw,remount -t ext4 /dev/block/platform/sdhci-tegra.3/by-name/UDA
mount -o rw,remount -t ext4 /dev/block/platform/sdhci-tegra.3/by-name/CAC
Click to expand...
Click to collapse
This is really pointless, userdata is already RW, cache should be RW, but more importantly you do nothing that would require them to be remounted
I'm not sure what I am doing wrong here. Can anyone help? All the files are there.
TadeoNYC said:
I'm not sure what I am doing wrong here. Can anyone help? All the files are there.
Click to expand...
Click to collapse
The command should be "adb push su /sdcard/su" (pushing su to the sdcard).
Setup wired and/or wireless ADB
(Optional) Put adb.exe in your Windows PATH variable so you can run it from anywhere
Download and unzip the SuperUser files from http://d-h.st/BBk
Open an ADB shell with elevated permissions
Code:
adb shell
su
Mount the system partition as read-write
Code:
mount -o rw,remount -t ext4 /dev/block/platform/sdhci-tegra.3/by-name/APP
Exit the ADB shell
Code:
exit
exit
or CTRL + C
Push su to the sdcard
Code:
adb push su /sdcard/su
Open an ADB shell with elevated permissions
Code:
adb shell
su
Cat su into /system/xbin
Code:
cat /sdcard/su > /system/xbin/su
Create a symbolic link to su in /system/xbin from /system/bin (safer/cleaner than just putting su directly in the bin folder)
Code:
ln -s /system/xbin/su /system/bin/su
Set the su permissions to -rwsr-sr-x
Code:
chmod 6755 /system/xbin/su
Exit the ADB shell
Code:
exit
exit
or CTRL + C
Install SuperUser
Code:
adb install com.koushikdutta.superuser.apk
Install BusyBox
Code:
adb install stericson.busybox.apk
Run SuperUser on the OUYA (Make > Software > SuperUser) and allow it to update
Thank you Elmero.
I'm so glad I gave up and went to bed last night. It could not have gone smoother. I followed the instructions for setting up wireless adb from here http://forum.xda-developers.com/showthread.php?t=2272266 as well.
TIP: I wasted an hour or more trying to figure out why PC was not recognizing the OUYA at all. It was the stupid Micro usb port, compunding the fact that all the ports are to close to begin with the micro usb port is very deep. Neither of my Samsung cables worked, fortunately I have a kodak pocket video cam and the cable for that is a few mm longer and worked perfectly.
And who said Kodac isn't relevant anymore?
Sent from my Nexus 7 using xda premium
The link to the Superuser.apk is not working.
pdelponte said:
The link to the Superuser.apk is not working.
Click to expand...
Click to collapse
Working fine for me...
Sent from my HTC One using Tapatalk 4 Beta
WinDroidGuy said:
Working fine for me...
Sent from my HTC One using Tapatalk 4 Beta
Click to expand...
Click to collapse
Not working for me either.
This webpage is not available
The webpage at http://fs1.d-h.st/download/00044/BBk/superuser.zip might be temporarily down or it may have moved permanently to a new web address.
Click to expand...
Click to collapse
There is an issue with the website. Just try back until it connects.
Sent from my GT-P3113 using Tapatalk 2
just to be clear. once its rooted, can i install any android apk to the console? the one that i've bought from android play market?
tanush said:
just to be clear. once its rooted, can i install any android apk to the console? the one that i've bought from android play market?
Click to expand...
Click to collapse
1) It's already rooted.
2) You can already sideload anything you want to it, same as (almost) any android device, whether it is rooted or not. (http://forum.xda-developers.com/showpost.php?p=41796467&postcount=11)
elmerohueso said:
The command should be "adb push su /sdcard/su" (pushing su to the sdcard).
Setup wired and/or wireless ADB
(Optional) Put adb.exe in your Windows PATH variable so you can run it from anywhere
Download and unzip the SuperUser files from http://d-h.st/BBk
Open an ADB shell with elevated permissions
Code:
adb shell
su
Mount the system partition as read-write
Code:
mount -o rw,remount -t ext4 /dev/block/platform/sdhci-tegra.3/by-name/APP
Exit the ADB shell
Code:
exit
exit
or CTRL + C
Push su to the sdcard
Code:
adb push su /sdcard/su
Open an ADB shell with elevated permissions
Code:
adb shell
su
Cat su into /system/xbin
Code:
cat /sdcard/su > /system/xbin/su
Create a symbolic link to su in /system/xbin from /system/bin (safer/cleaner than just putting su directly in the bin folder)
Code:
ln -s /system/xbin/su /system/bin/su
Set the su permissions to -rwsr-sr-x
Code:
chmod 6755 /system/xbin/su
Exit the ADB shell
Code:
exit
exit
or CTRL + C
Install SuperUser
Code:
adb install com.koushikdutta.superuser.apk
Install BusyBox
Code:
adb install stericson.busybox.apk
Run SuperUser on the OUYA (Make > Software > SuperUser) and allow it to update
Click to expand...
Click to collapse
So what steps need to be repeated after the OTA?
from my limited understanding I think it should be steps 4 through 12. Or does the system partition not need to be mounted as read-write again?
Sent from my GT-P3113 using Tapatalk 4 Beta
Yup 4-12
Edit
If su is still on the sdcard you can skip 6-8... wont hurt if you do them though...
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
professorpoptart said:
Yup 4-12
Edit
If su is still on the sdcard you can skip 6-8... wont hurt if you do them though...
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Might be a good idea to do them. The OTA version of such is different from the one in this guide. I had tried keeping the stock su and superuser complained
Sent from my Nexus 7 using xda premium
Do you still have access to the ouya store after SU installed? I heard rumors that access to the store was blocked until root access removed?
Sent from my GT-N7100 using Tapatalk 2
Hey guys,
can anybody help me?
Sent from my HUAWEI P7-L10 using XDA Free mobile app
87insane said:
Hey guys,
can anybody help me?
Sent from my HUAWEI P7-L10 using XDA Free mobile app
Click to expand...
Click to collapse
Did you try adb shell?
It's like terminal access, but through adb. So the terminal method for removing set_immutable.list should work...
Commands:
adb shell
su
mount -o rw,remount /system
cd system
chattr -R -i *
rm –f /system/set_immutable.list
lsattr (to see if it's still there)
Edit: I can create / delete directories through adb shell (just tested) so I'm sure deleting the file with the above method will work 100%.
GawDroid said:
Did you try adb shell?
It's like terminal access, but through adb. So the terminal method for removing set_immutable.list should work...
Commands:
adb shell
su
mount -o rw,remount /system
cd system
chattr -R -i *
rm –f /system/set_immutable.list
lsattr (to see if it's still there)
Edit: I can create / delete directories through adb shell (just tested) so I'm sure deleting the file with the above method will work 100%.
Click to expand...
Click to collapse
Thanks but i would like to do this via cmd. The instructions above are my
But this method is for use on the device self.
I need commandlines vor Windows. The only thing i found is push and pull but dont delete via cmd.
Sent from my HUAWEI P7-L10 using XDA Free mobile app
87insane said:
this method is for use on the device self.
I need commandlines vor Windows.
Click to expand...
Click to collapse
No it's not, it's for the CMD
Type "adb shell" in CMD and watch the magic happen!
GawDroid said:
No it's not, it's for the CMD
Type "adb shell" in CMD and watch the magic happen!
Click to expand...
Click to collapse
Omg!
I didnt saw that Option! THX!
Thats the solution!
Sent from my HUAWEI P7-L10 using XDA Free mobile app