Related
Since I'm mostly a lurker and I rarely run into issues that someone hasn't already run into, I don't have the post count to post on the actual Dynamic 1.4 thread. But I'm a little stumped. I seem to have lost root, and when I run anything in SS I get multiple I/O errors referencing data/data/chainfire su files.
I came from knoxraid. Installed new safestrap. wiped. Installed 1.0 from SS then 1.4 from SS. Set up the phone. Restored apps. Set up my favorite xposed modules. All was good for a few hours then I noticed I didn't get a full screen call ID on a call. I went in to check xposed and all the modules were unchecked. I tried to install/update but it said xposed wasn't compatible with my version. So I uninstalled xposed and tried reinstalling. Now it errors on install with "Can't install, free up space and try again" I have plenty of space, but I noticed the last I/O error I get in SS refers to data/data/xposed something or other. So I did the whole wipe and start with 1.0 process over, but nothing changed. No root. And I don't know if the I/O errors are keeping SS from wiping system when it installs, so I'm wary about installing another rom just to see if it works. But I can still boot into SS.
So I'm not sure which direction to go from here.
The errors are:
E:error: I/O error
E:error opening '/data/data/eu.chainfire.supersu/logs'
E:error opening '/data/data/de.robv.android.xposed.installer'
" " " /data/data/eu.chainfire.supersu/requests
fix permissions didn't work. An extra error was "unable to chmod data/data/eu.chainfire.supersu/requests"
I can't access those files using file explorer in SS.
Well if anyone runs into a similar issue- I wasn't able to install any applications after that as well.
A wipe from stock recovery fixed it. Although it wiped a lot more than I had anticipated
Was the installation on the stock slot? That is where it needs to be. Get your post count up so you can join us!
bri315317 said:
Was the installation on the stock slot? That is where it needs to be. Get your post count up so you can join us!
Click to expand...
Click to collapse
Yeah I made sure to use stock slot. And everything was fine for a few hours. I really don't think it had anything to do with the rom. I'm leaning towards and install/enable/unistall/disable process that I was burning through on xposed, since the locked up files were su and xposed. And I had other apps downloading and installing in the background. I just gotta learn to slow down. Got everything set up today and it's running beautifully. I was on your Dynamic GPE for JB and it was my favorite. I gave the KK version of knoxraid a shot but got super excited when I saw SS had updated and I could go back to dynamic without odin.
It was fun now that it's fixed. I hadn't been into stock recovery since the old DX days. I didn't realize a data wipe from there took out just about everything on internal storage. Good thing I had the important stuff backed up.
I've been following your work for a while. And you sir, are fantastic. :good:
my phone is the Blu VIVO IV (aka Gionee ELIFE S5.5) with kit kat and I got it rooted by following this post
http://forum.xda-developers.com/android/development/root-blu-vivo-iv-kitkat-4-4-2-t2854480
-I have superSu pro installed
-Root checker shows that I am rooted
-Mobile uncle runs (shows root) and I have no problem loading the recovery image
-unknown sources enabled
But xposed framework does not work correctly and I can't figure out what is wrong
- Xposed framework 2.6, 2.6.1 and 2.7 installs but it keeps telling me
"The latest version of Xposed is currently not active. Did you install the framework and reboot"
When I look under active and bundle. The # of active is the same as the bundled (app_ process 58 green active/ 58 bundled red)
I have reinstalled with classical, recovery (flash automatically) and recovery (manual flash). Same thing happens in all cases
If i ignore it and install modules, they do not take effect because it keeps telling me that xposed framework is not active.
- I tried xposed framework 2.5 and 2.5.1. They install and after a reboot becomes xposed is active and i don't get the message that it is unactive but i get crashes on my system ui. Gallery, mobile uncle and etc.
so i did a little more digging and I found that if check the "disable resource hooks" xposed now runs as active but most of the modules I'm using don't run
my logs shows the following
errors during xposed initialization
java.lang.ClassCastExpection: class android content res XResources doesn't extend class amigo theme core res GioneeResources
I assume that means that theming engine on my phone is interfering with Xposed?
anyone know i can get this resolved? I like to use xposed framework on blu vivo IV
rolexconfuse said:
anyone know i can get this resolved? I like to use xposed framework on blu vivo IV
Click to expand...
Click to collapse
Sorry for the obvious question, but...
are you using ART ? If so Xposed automatically deactivates itself, since it's only compatible with Dalvik !
dev>null said:
Sorry for the obvious question, but...
are you using ART ? If so Xposed automatically deactivates itself, since it's only compatible with Dalvik !
Click to expand...
Click to collapse
sorry but can you explain what ART is? I believe the phone is running Dalvik
Sorry, I found what ART was and I have the option to run ART or Dalvik and I am running under Dalvik right now under "developers Option"
Digging around in the forum I know that the Huawei phones had the same issue but then they could just edit one line in the build.prop and it worked. Unfortunately this doesn't work for me since that line is specific to just huawei phones.
help
I'm having same problem with gionee, exposed framework won't installe
Having same problem as everyone else with Gionee s5.5.
dev>null said:
Sorry for the obvious question, but...
are you using ART ? If so Xposed automatically deactivates itself, since it's only compatible with Dalvik !
Click to expand...
Click to collapse
I think you have that backwards... It switches back to dalvik...
getting the same error
'
Errors during Xposed initialization
java.lang.ClassCastException: class android.content.res.XResources doesn't extend class amigo.theme.core.res.GioneeResources
ok I sort it out
http://forum.xda-developers.com/showthread.php?t=2681678
thanks to "mundraguda"
help
rolexconfuse said:
Sorry, I found what ART was and I have the option to run ART or Dalvik and I am running under Dalvik right now under "developers Option"
Digging around in the forum I know that the Huawei phones had the same issue but then they could just edit one line in the build.prop and it worked. Unfortunately this doesn't work for me since that line is specific to just huawei phones.
Click to expand...
Click to collapse
help me...
i've huawei g700 u-10
pfff
I'm having same problem with gionee, exposed framework won't install
1-Install the xpose and open
2-Go to the framework and tap to "install/update"
3-reboot your phone
4- Again open the xpose go to framework and tap to
Installation mode" classical (write to/ system directly)
5- change the classical (write to/ system directly) to
Recovery (flash zip automatically)
6- And version change to "beta (sum box to be expected) click
7- Disabled to resource hooks click and back
Click the reboot don't click the "install/update"
And reboot your phone and enjoy:
divakark you are a hero. My Tornado 348 wouldn't work whatsoever and I followed what you said and it works perfectly thanks so much
Ok here it is: Xposed for the new @OvrDriVE root method. I have not tested method on VZW as i do not have their phone, but this still should being this is a Samsung Note 7.
As with any custom rom's, root, add-on's, you assume all risks with modding your phone. You have been warned.
Make sure you read all of my directions below, before you start posting errors with the install. Worst case you just have to start over with @OvrDriVE s installation.
Here is the way you can install xposed on your phone after you have root. I in no way have made any files or apks, I am just posting ways you get this loaded on your phone.
Please Thank the devolopers and others that have made all these files and apks possible..
The way is to install Xposed framework via FlashFire:
1. Download FlashFire, You can get it from the app store: https://play.google.com/store/apps/details?id=eu.chainfire.flash&hl=en
2. Download the Xposed Installer Apk: http://forum.xda-developers.com/showpost.php?p=58828974&postcount=1&nocache=1&z=3764362361329836
3. Download the Xposed Framework zip. <<< this is the file that you will be flashing via FlashFire: Xposed Framework.zip
4. Once you have all the files downloaded onto you computer/phone: you are ready to start. If you have'nt all ready copied all the files to your phone storage, do so now. If you did then you can move on to the #5.
5. Open FlashFire on your phone. Once it is loaded and open, click on circle with + button on the bottom right of the screen.
Then Click on Flash ZIP or OTA button.
Now select the xposed framework zip that you downloaded from #3.
Next you click the check mark on the top right of
the screen( do not change any of boxes on the left of the screen.<<< You Have Been Warned!!!!! .
Next scroll to the bottom of the screen and click the left button (flash button w the lighting bolt)
Sit back and watch FlashFire do its magic..
6. After #5 completes, you can now install the xposed installer apk from #2. Once installed open and check framework in the app and you should have this : Xposed framework version 86.1 (custom build by wanam / 2016709 is active.
7. Now go to Download in the xposed installer and download: Wanam Xposed 1.3.0 Made for Samsung Android 5 and 6 Roms by Wanam or you can download xTouchwiz by Wanam..
8. Once you downloaded it, install it, and then in the Xposed installer app- modules- you select the the app in #7 by placing a checkmark in the box on the right to activiate the modules.
9. Reboot your phone to activate the module.
10. Enjoy your efforts and customizing your phone:
If you some reason you want to uninstall xposed : flash this:xposed-uninstaller-20160211.zip
Confirmed working on my VZW Note 7 running PH1 firmware, rooted using @OvrDriVE's method.
Edit: for clarification, I used the second method (flashfire) to do this, and it worked like a charm.
Side note, you won't find Wanam Xposed 1.3.0 Made for Samsung Android 5 and 6 Roms by Wanam on xposed, it doesn't exist. Don't use Wanam Xposed either, it's been discontinued in favor of xTouchWiz. I've tested it myself and it works great, it's made by the same developer.
MOD EDIT: Large post quote put in hide tags.
Please don't quote large posts like this as it makes the thread difficult to read for other users.
galaxyuser88 said:
Ok here it is: Xposed for the new @OvrDriVE root method. I have not tested method on VZW as i do not have their phone, but this still should being this is a Samsung Note 7.
As with any custom rom's, root, add-on's, you assume all risks with modding your phone. You have been warned.
Make sure you read all of my directions below, before you start posting errors with the install. Worst case you just have to start over with @OvrDriVE s installation.
Here is 2 different ways you can install xposed on your phone after you have root. I in no way have made any files or apks, I am just posting ways you get this loaded on your phone.
Please Thank the devolopers and others that have made all these files and apks possible..
A. The first way is to use ADB to push the framework to your phone, Here is a link to the post with direction:
ADB Xposed installer
B: The second way is to install Xposed framework via FlashFire:
1. Download FlashFire, You can get it from the app store: https://play.google.com/store/apps/details?id=eu.chainfire.flash&hl=en
2. Download the Xposed Installer Apk: http://forum.xda-developers.com/showpost.php?p=58828974&postcount=1&nocache=1&z=3764362361329836
3. Download the Xposed Framework zip. <<< this is the file that you will be flashing via FlashFire: Xposed Framework.zip
4. Once you have all the files downloaded onto you computer/phone: you are ready to start. If you have'nt all ready copied all the files to your phone storage, do so now. If you did then you can move on to the #5.
5. Open FlashFire on your phone. Once it is loaded and open, click on circle with + button on the bottom right of the screen.
Then Click on Flash ZIP or OTA button.
Now select the xposed framework zip that you downloaded from #3.
Next you click the check mark on the top right of
the screen( do not change any of boxes on the left of the screen.<<< You Have Been Warned!!!!! .
Next scroll to the bottom of the screen and click the left button (flash button w the lighting bolt)
Sit back and watch FlashFire do its magic..
6. After #5 completes, you can now install the xposed installer apk from #2. Once installed open and check framework in the app and you should have this : Xposed framework version 86.1 (custom build by wanam / 2016709 is active.
7. Now go to Download in the xposed installer and download: Wanam Xposed 1.3.0
Made for Samsung Android 5 and 6 Roms by Wanam
8. Once you downloaded it, install it, and then in the Xposed installer app- modules- you select the the app in #7 by placing a checkmark in the box on the right to activiate the modules.
9. Reboot your phone to activate the module.
10. Enjoy your efforts and customizing your phone:
If you some reason you want to uninstall xposed : flash this:xposed-uninstaller-20160211.zip
Click to expand...
Click to collapse
ohblindone said:
Confirmed working on my VZW Note 7 running PH1 firmware, rooted using @OvrDriVE's method.
Edit: for clarification, I used the second method (flashfire) to do this, and it worked like a charm.
Side note, you won't find Wanam Xposed 1.3.0 Made for Samsung Android 5 and 6 Roms by Wanam on xposed, it doesn't exist. Don't use Wanam Xposed either, it's been discontinued in favor of xTouchWiz. I've tested it myself and it works great, it's made by the same developer.
MOD EDIT: Large post quote put in hide tags.
Please don't quote large posts like this as it makes the thread difficult to read for other users.
Click to expand...
Click to collapse
Ok, 1.3.0 does exist on xposed app, and yes you can use xTouchwiz by wanam as well, both are good, xtouchwiz has alot of stuff removed that will not work with the new firmware but he also removed alot of stuff that he didnt think was needed, so you can try both out and you can decide what you want to use..I have used both and they both work.. Now unfortunately Wanam will not be updating any of these, but is only providing support only..
galaxyuser88 said:
Ok, 1.3.0 does exist on xposed app, and yes you can use xTouchwiz by wanam as well, both are good, xtouchwiz has alot of stuff removed that will not work with the new firmware but he also removed alot of stuff that he didnt think was needed, so you can try both out and you can decide what you want to use..I have used both and they both work.. Now unfortunately Wanam will not be updating any of these, but is only providing support only..
Click to expand...
Click to collapse
Apologies, looking at that module and it's description (saying it was only for lolipop) I figuredit wouldn't be good to install on 6.0.
I also went to it's dev page on XDA and it was stated that the module is no longer being supported.
Save for later!!
So really this works just like normal except using Flashfire. I got scared thinking I would white knuckle it like the root. Any other module issues? Using several of them? I like some of the small play store tweaks and battery saving modules on other phones, I know wanam has the only safe 'do everything gravity box for touchwiz' stuff.
Im not sure why, but after installing this to my note 7, The "Android is optimizing # of #" comes up and it optimizes 1 app only... It won't go away and everytime I reboot It happens. I sort of want xposed, but if this is happening everytime I can just go without it....
It stays on or you just get the normal startup type message that lasts for a few seconds? Does it affect anything else? Seems minor.
guthrien said:
It stays on or you just get the normal startup type message that lasts for a few seconds? Does it affect anything else? Seems minor.
Click to expand...
Click to collapse
Were you replying to me? It does 1 of 1 every boot. Its more annoying than anything really. Not worth the trouble. And if I uninstall it, the optimizing screen goes away. No one else is complaining about it so its just my problem.
So what xposed apps have been testing and what are all of you using? I haven't used xposed in a couple of years and the modules I liked seem outdated, and I'm afraid to use them. A lot of them say they are only for AOSP and to not use on Samsung and other modified forks. I was surprised at the amount of modules which were totally outdated, I'd say at least half or more were from 1-2 years ago or longer since they were last updated.
Biff I'm getting that issue as well. The first reboot it optimized all 359 of my apps, but now on every reboot it optimizes just 1 of 1 app, only takes a few seconds but it is annoying. I'm finding little utility in xposed anyhow so am not sure I'm going to bother keeping it. I didn't find the oldies but goodies like wanam, something to turn off the volume nag if too high, gravity box was very explicit not to use on Samsung, etc.
Yea I don't really seem to use anything is xposed anyways. The 1 of 1 thing is quite annoying! No one else seems to think that! I think im just gonna pass on installing this for a while..
I'm not getting the constant optimization like you guys. I did get all at once after adding it.
I'm using Amplify, GlobalS-health, Greenify, Play Store Changelog, XHangouts and Wanam's XTouchwiz, though very lightly on the last.
Optimizing apps on reboot went away after 4 or 5 reboots. Enjoying xposed but still hesitant to install modules.
Sent from my SM-N930V using Tapatalk
Really happy about this work so far. Great job and good guidance!
Ran a quick "safe" test with xTouchWiz by moving the clock from default (right) to the left side. It worked (after phone restart).
Excited, I tried System/Disable tether provisioning... Restarted the phone. Works.
Awesome.
I also have the "Optimizing 1 of 1" issue previously mentioned, but it's not often I reboot, so not too worried. Wondering if there is a way to get a log for which file is being optimized. Always good to know what's happening.
roslof said:
Really happy about this work so far. Great job and good guidance!
Ran a quick "safe" test with xTouchWiz by moving the clock from default (right) to the left side. It worked (after phone restart).
Excited, I tried System/Disable tether provisioning... Restarted the phone. Works.
Awesome.
I also have the "Optimizing 1 of 1" issue previously mentioned, but it's not often I reboot, so not too worried. Wondering if there is a way to get a log for which file is being optimized. Always good to know what's happening.
Click to expand...
Click to collapse
Atleast I know its xposed that is causing this... I believe there is a way to get logs, but I am unsure how to do this or where to get it... I rarely reboot as well, but its just bothersome to see it doinh that.
Awesome module I discovered while trying to figure out how to get rid of the ugly roaming triangle this root puts on the signal bars. It's called Flat Style Bar Indicators, some free stuff and a very nominal cost for full version. I also see that the root took away the carrier name, which can be added back with this module. You can change any aspect of the status bar, it's very cool. I made my signal bars look like an iPhone, much easier and clearer to read.
galaxyuser88 said:
Ok here it is: Xposed for the new @OvrDriVE root method. I have not tested method on VZW as i do not have their phone, but this still should being this is a Samsung Note 7.
As with any custom rom's, root, add-on's, you assume all risks with modding your phone. You have been warned.
Make sure you read all of my directions below, before you start posting errors with the install. Worst case you just have to start over with @OvrDriVE s installation.
Here is the way you can install xposed on your phone after you have root. I in no way have made any files or apks, I am just posting ways you get this loaded on your phone.
Please Thank the devolopers and others that have made all these files and apks possible..
The way is to install Xposed framework via FlashFire:
1. Download FlashFire, You can get it from the app store: https://play.google.com/store/apps/details?id=eu.chainfire.flash&hl=en
2. Download the Xposed Installer Apk: http://forum.xda-developers.com/showpost.php?p=58828974&postcount=1&nocache=1&z=3764362361329836
3. Download the Xposed Framework zip. <<< this is the file that you will be flashing via FlashFire: Xposed Framework.zip
4. Once you have all the files downloaded onto you computer/phone: you are ready to start. If you have'nt all ready copied all the files to your phone storage, do so now. If you did then you can move on to the #5.
5. Open FlashFire on your phone. Once it is loaded and open, click on circle with + button on the bottom right of the screen.
Then Click on Flash ZIP or OTA button.
Now select the xposed framework zip that you downloaded from #3.
Next you click the check mark on the top right of
the screen( do not change any of boxes on the left of the screen.<<< You Have Been Warned!!!!! .
Next scroll to the bottom of the screen and click the left button (flash button w the lighting bolt)
Sit back and watch FlashFire do its magic..
6. After #5 completes, you can now install the xposed installer apk from #2. Once installed open and check framework in the app and you should have this : Xposed framework version 86.1 (custom build by wanam / 2016709 is active.
7. Now go to Download in the xposed installer and download: Wanam Xposed 1.3.0 Made for Samsung Android 5 and 6 Roms by Wanam or you can download xTouchwiz by Wanam..
8. Once you downloaded it, install it, and then in the Xposed installer app- modules- you select the the app in #7 by placing a checkmark in the box on the right to activiate the modules.
9. Reboot your phone to activate the module.
10. Enjoy your efforts and customizing your phone:
If you some reason you want to uninstall xposed : flash this:xposed-uninstaller-20160211.zip
Click to expand...
Click to collapse
Does Gravitybox work as far as nav button is concerned?
Lmax579 said:
Does Gravitybox work as far as nav button is concerned?
Click to expand...
Click to collapse
As far as gravity box goes, i have no idea if it works or not. Give it a try and post your findings.
galaxyuser88 said:
As far as gravity box goes, i have no idea if it works or not. Give it a try and post your findings.
Click to expand...
Click to collapse
It does but navbar might break system UI, is there anyway to fix UI thru adb?
spinedoc said:
Awesome module I discovered while trying to figure out how to get rid of the ugly roaming triangle this root puts on the signal bars. It's called Flat Style Bar Indicators, some free stuff and a very nominal cost for full version. I also see that the root took away the carrier name, which can be added back with this module. You can change any aspect of the status bar, it's very cool. I made my signal bars look like an iPhone, much easier and clearer to read.
Click to expand...
Click to collapse
Okay, I was skeptical at first, but realized I need to fly soon and wanted to stimulate the green battery icon in case security thinks this is a recalled Note 7. There's been so much press about the green icon meaning the phone is safe that *not* seeing one may have folks thinking it's not...
Results with this module exceeded my expectations. And no more voLTE...
Edit: Turns out this didn't permanently resolve the issue where VoLTE appears. It comes back and will linger until reboot. We'll need a real fix, either by a flashable zip or need/updated Xposed module.
POST IS UPDATED REGULARLY.
LINK 1 - Parallel Space: https://play.google.com/store/apps/details?id=com.lbe.parallel.intl&hl=en[/URL][/URL]
LINK 2 - Parallel Space 64-Bit Support: https://play.google.com/store/apps/details?id=com.lbe.parallel.intl.arm64&hl=en[/URL][/URL]
Salutations. (That means 'Hello').
NOTE: For those who are interested, I will include background information about how I came to the solution. All that other jazz too. First and foremost however; the fix!
SOLUTION:
Right at the top of the post, you will find two links. This being a new account and all (don't ask), until I create 10 posts I cannot include any outside links. So once I've done so, I will update the post.
STEP **: So at the top of the post, there are clearly two links. 64-Bit Android devices are becoming increasingly common. This architecture may pose a few problems. give the application framework. Should you own a 64-Bit device, I recommend installing this application too (LINK 2). This will theoretically prevent any obstacles.
Pre-requisite(s): Make sure you have the 'Snapchat' application installed. It is recommended to have installed the latest update from the Google Play Store.
STEP ONE: Download the application appended to LINK 1. This is called Parallel Space. You might recognize the name (its creators are the same who allow you to seamlessly virtualize Windows OS on Mac OS).
STEP TWO: Launch the application.
STEP THREE: You should be prompted with a grid-like interface. Here you will be greeted with a range of familiar icons. In the top right corner of each icon, you will notice a blue check-mark. Make sure that there is one next to the 'Snapchat' icon. This will ensure that the app is 'cloned'.
STEP FOUR: In the 'Parallel Space' app, tap on the 'Snapchat' icon. This will launch the application.
STEP FIVE: From here it is pretty self-explanatory. You are greeted by the standard 'Snapchat' interface. Tap on 'Log In'. Then proceed to do so.
STEP SIX: 'Snapchat' should be functioning as normal.
STEP SEVEN (BONUS): During testing, this worked on and off. --
Remain logged-in to the 'cloned' 'Snapchat' application within the 'Parallel Space' application.
Then proceed to launch the stock 'Snapchat' application.
Next attempt to 'Log-In'.
Should this operation be successful, you are then free to uninstall 'Parallel Space' and any related assets from your device.
HOWEVER, I personally do not recommend this. When logging out or updating the 'Snapchat' application, errors may be re-encountered.
Instead, I recommend that if possible, do use the stock application, but leave 'Parallel Space' installed. Using the stock app will improve efficiency and reduce the load on system resources. But keeping the 'Parallel Space' application on the device, well; you get the point.
Enjoy the fix! If it does not work, please let me know [Device Name and Model No.]. I've tested on various devices, succeeded every-time. Do keep in mind that this is a loop-hole, so may be patched in future or not work at all for some devices.
Background (Because I know someone will ask): The idea came to mind while using a LG G5 as a daily driver. I had tested every custom ROM available for the device. The problem was that with custom ROM's, there was always an issue, Malfunctioning sensors, camera's not working persistently, etc , etc.
The G5's stock ROM left me wanting more. The overbearing interface made it a living hell. Plus, the device just being rooted (NO XPOSED) meant that 'Snapchat' did not work. I looked for fixes for a time, but could not find any.
Development of ROM's for the device is on-going, and I am an active member. But I just couldn't handle not being able to use the camera (one of the device's best features) and no accelerator, screen-rotation, etc. So I went back to stock again. Do keep in mind that I was alternating/dual-booting between custom and stock ROM's just because of the camera; mainly.
This most recent time. instead of flashing stock MM, I flashed stock N for the G5. For 850, it has been officially released in some countries, and a manual flash via TWRP was a peice of cake.
This update is a lot better. I am running Nova Launcher again. So it makes it look a little better. Themes have also been improved. I am using an in-built dark one which makes the device look a lot better aesthetically. Additionally, I'm rocking a white carbon-fibre skin on the exterior; improving grip and overall security. The only issue was again, no 'Snapchat'.
After a few days, I had the idea to attempt this. I tested my theory and it worked! That's it.
Please do keep in mind that I will update this post as often as possible.
P.S This was tested just after updating to the latest version of 'Snapchat' which was a significant update. It included Shazam, Groups, etc. So you know, pretty cool that it worked.
Did not work on Google Nexus 5 running Android 7.1.1. Still gives error message saying that I can't connect to the server.
Same here, not working on freshly reinstalled and rooted 7.1.1 Nexus 5x. No Xposed, no nothing. I get the infuriating "temporarily failed" message in both cloned and regular modes.
It didn't worked. S7 edge exynos (6.0.1)
Holyphe said:
It didn't worked. S7 edge exynos (6.0.1)
Click to expand...
Click to collapse
I'm pretty sure if you get Xposed framework, there's a module that allows you to hide root from apps. Problem is that there is no Xposed framework for Android 7 yet. Hope this helps.
hot_potato said:
I'm pretty sure if you get Xposed framework, there's a module that allows you to hide root from apps. Problem is that there is no Xposed framework for Android 7 yet. Hope this helps.
Click to expand...
Click to collapse
Whats the name of it?
Holyphe said:
Whats the name of it?
Click to expand...
Click to collapse
I personally tried the module on cm13 but it doesnt work for me. I think that somehow snapchat knows when you use xposed too.
The thing is that on aosp roms with root already build in sometimes snapchat do not catch it but if you have xposed, no way you can get in. For that freaky snapchat app here is what i did: install any rom, if if had root build in i then install su uninstaller zip with twrp then log in into snapchat and after that, rooting with super su zip again. The catch is that once you log out of the app and attempt to log in again, you cant get in and you have to repeat the proccess. It's annoying as hell!!! They need to disable the security check, if people want to cheat che system somehow they will, so whats the point. Also there are much more tweaks for jailbroken iphones and they have no problem with it .
Sorry for the rant here buqt im super frustrated.
AndroidFL said:
I personally tried the module on cm13 but it doesnt work for me. I think that somehow snapchat knows when you use xposed too.
The thing is that on aosp roms with root already build in sometimes snapchat do not catch it but if you have xposed, no way you can get in. For that freaky snapchat app here is what i did: install any rom, if if had root build in i then install su uninstaller zip with twrp then log in into snapchat and after that, rooting with super su zip again. The catch is that once you log out of the app and attempt to log in again, you cant get in and you have to repeat the proccess. It's annoying as hell!!! They need to disable the security check, if people want to cheat che system somehow they will, so whats the point. Also there are much more tweaks for jailbroken iphones and they have no problem with it .
Sorry for the rant here buqt im super frustrated.
Click to expand...
Click to collapse
That's the only solution I've seen working so far. unroot and reroot. Root cloak doesn't work, parallel doesn't work. I should've logged in before rooting and I hate to do it again.
Any work arounds yet? I've seen ppl do it using titanium backup but I'm not sure if that works. Can anybody help?
Samsung s5 G900v Not working
I have been searching and searching and still haven't found a way to sign into snapcat. It took me about 6 months to be able to find out how to root my phone.
Dukeboyty said:
I have been searching and searching and still haven't found a way to sign into snapcat. It took me about 6 months to be able to find out how to root my phone.
Click to expand...
Click to collapse
Well todays your lucky day.
Step one turn off xposed.
Step two reboot
Step three sign into snapchat
Step four turn xposed back on
Step five reboot
You should be able to snap now.
Okay. I will try this on monday and will let youknow how it goes. Right now I decided to unroot to use snapchat, so I didn't loose my streaks. Thanks in advane will let you know how it goes.
immorality said:
Well todays your lucky day.
Step one turn off xposed.
Step two reboot
Step three sign into snapchat
Step four turn xposed back on
Step five reboot
You should be able to snap now.
Click to expand...
Click to collapse
Now that i think of it, when i uninstalled xposed it didn't work still. but after i "fully unrooted" through Super su and tried to sign in it worked. so it has to do with root or maybe both but the xposed didnt work for me. Thanks even though it didn't/wouldn't have worked for me!
Dukeboyty said:
Now that i think of it, when i uninstalled xposed it didn't work still. but after i "fully unrooted" through Super su and tried to sign in it worked. so it has to do with root or maybe both but the xposed didnt work for me. Thanks even though it didn't/wouldn't have worked for me!
Click to expand...
Click to collapse
Snapchat detects xposed framework.
Though at a time they did do root they since moved to blocking xposed due to the security concerns with money and also privacy of the user.
Though with certain phones and ect that could be the case I am using a s5 and have no issues.
just install magisk and systemless xposed and turn on magisk hide in magisk manager now snapchat won't detect root
then when u wanna log in just turn off xposed in xposed installer and reboot "it won't take time booting optimizing app when reactivated now" so reboot is easy
and u can have multiple accounts by backing up snapchat with titanium backup and don't ever log out just wibe its data and when u want to relog just restore the backup
and if u want to have multiple accounts access just patch the titanium backup with luckypatcher and have multiple backups (accounts)
ahmedsasker said:
just install magisk and systemless xposed and turn on magisk hide in magisk manager now snapchat won't detect root
then when u wanna log in just turn off xposed in xposed installer and reboot "it won't take time booting optimizing app when reactivated now" so reboot is easy
and u can have multiple accounts by backing up snapchat with titanium backup and don't ever log out just wibe its data and when u want to relog just restore the backup
and if u want to have multiple accounts access just patch the titanium backup with luckypatcher and have multiple backups (accounts)
Click to expand...
Click to collapse
Can u make a instructions how to do it step by step? How can i turn off xposed in xposed installer? It also works when SuperSu is installed or i have to unistall it first?
Fnn.09 said:
Can u make a instructions how to do it step by step? How can i turn off xposed in xposed installer? It also works when SuperSu is installed or i have to unistall it first?
Click to expand...
Click to collapse
make a nandroid backup if u want
1- full unroot by opening supersu and going to settings and press Full unroot and wait till it finishes and restart
2- download xposed uninstaller if u have xposed framework installed and flash it
3- install magisk manager from playstore
4- download and flash last magisk which is (12v) now from : https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
5- flash magisk v12.0 which you downloaded now your phone will have systemless root
6- go into magisk manager app and go to settings and toggle "Magisk Hide" (ON) and restart now your root is hidden
7- remove your current xposed app and install this one : https://forum.xda-developers.com/xposed/material-design-xposed-installer-t3137758
8- flash systemless xposed : https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268
9- reboot and go to the xposed installer app and toggle the xposed off or on as you want when u restart it won't take time optimizing apps like before so fast now
your root is hidden now but xposed is not but you can disable it and enable it easily
Instead of using Parallel Space (which I believe to be insecure) use Island to clone your apps. It's a little more advanced to setup, but it's a lot more secure. It works for rooted and non-rooted devices. On the 1st page of the thread, it explains how Parallel Space and others repack the apk file locally, which is dangerous. https://forum.xda-developers.com/android/apps-games/closed-beta-test-incoming-companion-app-t3366295
Island never repack apk file locally, which is inherently insecure for users, since all your app data (including password input) are technically in the hand of MoboClean. (The same applies to other similar tools, e.g. LBE Parallel Space)
Instead, Island takes advantage of the underlying mechanism used by "Android for Work". This ensures that all your apps run natively in Android system and their data are securely stored in internal location of Android which is never accessible by Island. It has the same level of security as "Android for Work".
Click to expand...
Click to collapse
Be sure to read the disclaimer!!! The app is still only available in closed beta at the time of writing this, and could possibly cause you're device to bootloop or even possibly brick it, but root, xposed, or other modifications {in my opinion) has a higher chance of bootloops or bricking your device.
You follow the same steps in island to clone snapchat as you would in Parallel Space to login to snapchat. It might be possible to use the play store inside island to download snapchat inside island and login that way. I can't remember exactly how it works. I believe that island is a good way to test apps in a "sandbox environment" to keep the data excluded, safe and secure from the regular apps that you have installed outside of island.
I use Magisk now which bypasses SafetyNet which is what snapchat uses to "block access" to modified/rooted devices.
Probably the easiest method is to download Casper which is an alternative snapchat client that allows you to save snaps, and many other features that the official snapchat client can't do. Find Casper at www.casper.io
FYI Netflix has started to change how they do things as well by hiding the app's play store page from devices that have been modified or rooted, but it's still possible to simply sideload Netflix for now.
I just got my Droid 4 off of Ebay, and I'm going back to Android after 5 long years of Windows Phone. Rooted and installed the latest version of Safestrap that lets us used the (now)unused partitions. Seeing the lack of ROM diversities, My question is: Which ROM should I install? xD
All the Marshmallow ones and the Lollipop one I tried where really slow after installing just a few apps. So I went back to 4.1.2. There is a KitKat one that I'd like to try but the links are dead. I also found a thread suggesting to modify the booting of Cyanogen 12 with apparently good results, but I didn't look too much into how to do that.
Tbh I'd love something like SFOS but it looks like it's being worked on right now. So it might be a while till it's ready for daily usage, if it's ever brought to that point. :/
peter768 said:
I just got my Droid 4 off of Ebay, and I'm going back to Android after 5 long years of Windows Phone. Rooted and installed the latest version of Safestrap that lets us used the (now)unused partitions. Seeing the lack of ROM diversities, My question is: Which ROM should I install? xD
All the Marshmallow ones and the Lollipop one I tried where really slow after installing just a few apps. So I went back to 4.1.2. There is a KitKat one that I'd like to try but the links are dead. I also found a thread suggesting to modify the booting of Cyanogen 12 with apparently good results, but I didn't look too much into how to do that.
Tbh I'd love something like SFOS but it looks like it's being worked on right now. So it might be a while till it's ready for daily usage, if it's ever brought to that point. :/
Click to expand...
Click to collapse
Hello,
I'm using stock one JB 4.1.2, heavy debloated and overclocked. You can add some functionality from other roms by instaling xposed.
I recommend the latest Lineage 13.0 ROM. This is my daily driver and it's amazing.
I also have Mentors' debloated Stock ROM for dualboot, in case I ever need it. The biggest contra of the Stock ROM is the extremely bad GPU performance. It can't even display Snapchat because there are graphical errors everywhere. It also stutters while scrolling in a lot of apps.
These problems are all gone with CM13. I played through Red Dwarf on it and the game worked smooth as butter, with some nice, detailed graphics. Get an overclocked kernel from the forums here, while you're at it.
You should also never use the Stock ROM as the main system, because it lacks years of updates and has severe security holes in it.
schmatzler said:
I recommend the latest Lineage 13.0 ROM. This is my daily driver and it's amazing.
I also have Mentors' debloated Stock ROM for dualboot, in case I ever need it. The biggest contra of the Stock ROM is the extremely bad GPU performance. It can't even display Snapchat because there are graphical errors everywhere. It also stutters while scrolling in a lot of apps.
These problems are all gone with CM13. I played through Red Dwarf on it and the game worked smooth as butter, with some nice, detailed graphics. Get an overclocked kernel from the forums here, while you're at it.
You should also never use the Stock ROM as the main system, because it lacks years of updates and has severe security holes in it.
Click to expand...
Click to collapse
I tried Lineage with an overclocked kernel yesterdat but it was still quite laggy. I also couldn't install the google apps due to insufficient space. Did you do anything else? Also I'm on cdma so I stayed away from Mentor's ROMs.
Instead of the original GAPPS, I'm using:
- XPosed
- the FakeGapps module for XPosed
- the MicroG Play Services from here
- and the Google Play Store. Got the APK from apkmirror, installed it, copied the files from /data/app/com.android.vending to /system/priv-app/com.android.vending and chmodded the files to 644 and directories to 755 (this has to be done, otherwise the Play Store cannot login).
This is a bit of work, but it runs much faster and doesn't drain my battery as fast as the original GAPPS do. The last step isn't even required, you can use FakeStore or BlankStore instead and just get all your applications from apkmirror if you want it.
Bonus feature: You can now use Google Maps with the Apple NLP backend.
schmatzler said:
Instead of the original GAPPS, I'm using:
- XPosed
- the FakeGapps module for XPosed
- the MicroG Play Services from here
- and the Google Play Store. Got the APK from apkmirror, installed it, copied the files from /data/app/com.android.vending to /system/priv-app/com.android.vending and chmodded the files to 644 and directories to 755 (this has to be done, otherwise the Play Store cannot login).
This is a bit of work, but it runs much faster and doesn't drain my battery as fast as the original GAPPS do. The last step isn't even required, you can use FakeStore or BlankStore instead and just get all your applications from apkmirror if you want it.
Bonus feature: You can now use Google Maps with the Apple NLP backend.
Click to expand...
Click to collapse
I tried to follow this, but Google Play Store crashes. When I run the app, the Google Account is created, but thats it, I cannot run Play Store. Do you have any advice?
It still works fine for me with the same instructions posted above.
Maybe you have a different version of the PlayStore? Mine is from here and doesn't crash:
http://www.apkmirror.com/apk/google-inc/google-play-store/google-play-store-7-8-32-release/
You may have to kill the app after the first login and open it again so you can accept the EULA, though. Otherwise you'll get a connection error.
(Useful: 5 second back button killing in the developer options.)
If it still doesn't work:
- Open up the microG Settings and check if signature spoofing is indeed enabled
- Open up Xposed and check if the FakeGapps module is activated. If it isn't, activate it and reboot.
---
A completely different, even more lightweight method to get PlayStore and microG working:
1. Flash the latest LOS13 ROM.
2. Enable ADB debugging on the device and connect it via USB to your PC.
3. Install adb and python on your PC and run the Tingle application (cmd.exe: "python main.py")
This will patch the installed ROM on the fly and replace a system file. It enables signature spoofing, which means fake Google Play Services will run WITHOUT XPosed. No XPosed means even more free resources on the device.
The rest of the instructions is unchanged:
4. Get the MicroG Play Services from here
5. Get the Google Play Store from apkmirror, install it, copy the files from /data/app/com.android.vending to /system/priv-app/com.android.vending and chmod the files to 644 and directories to 755 (this has to be done, otherwise the Play Store cannot login).
This method is a lot more extensive, especially on Windows systems where you'll have to install ADB and make it visible in the system path. You'll also have to install python manually. A pain. Much easier on a Linux system.
But it's the only method to make it work on LOS14 at the moment, because there is no XPosed for Android 7 out yet AND the only method for people who don't want to use XPosed.
Just FYI, maybe this helps someone.
peter768 said:
There is a KitKat one that I'd like to try but the links are dead.
Click to expand...
Click to collapse
You can get CM11 and other CyanogenMods for Droid 4 here - http://web.archive.org/web/20161226224516/http://download.cyanogenmod.org/?device=maserati.
peter768 said:
Tbh I'd love something like SFOS but it looks like it's being worked on right now. So it might be a while till it's ready for daily usage, if it's ever brought to that point. :/
Click to expand...
Click to collapse
You can get Sailfish OS for Motorola Droid 4 here - https://talk.maemo.org/showthread.php?t=99031.
It's not 100% stable but worth trying out (though not as daily driver for me).
Of course using Safestrap you can have more than one ROM installed on the device so you can follow the development of each ROM/OS you are interested in.
For example I have CM11 as my daily driver, stock ROM in case of problems (didn't have to start it until now) and Sailfish OS to look on its development.
schmatzler said:
You may have to kill the app after the first login and open it again so you can accept the EULA, though. Otherwise you'll get a connection error.
(Useful: 5 second back button killing in the developer options.)
.
Click to expand...
Click to collapse
Many thanks, this was the issue. Works perfectly also with newer play store version.
After some frustration with LOS13 (Bluetooth not working, laggy performance) I'm using now Mokee ROM (with FakeGapps for Xposed). Workes nicely, especially I appreciate the Aegis app for controlling app behaviour (autorun, wakelocks, background services, hibernate, broadcasts). Restarting the phone every 2nd day prevents performance lags which build up slowly.