Hi, I had a many phones, installed many roms many times without problems. I make everything ok. I`m on 2.2 stock, root, cwm, install ANY 2.3 or IZS or other rom is successfully, full wipe and what? Bootloop after kernel, roms dont loading (roms work on stock kernel, checked it). What is wrong? I bought the phone with izs rom. Any issue? Tried 10 times...
most if the time this is because you have a outdated recovery. install philz touch latest and try again.
I tried 3, one was recommended for that rom and this same, but i said installation looks good. Maybe i`ll try in the evening
Related
Hi all
I possess one o2x at present there 1035.21_20110218 on mckr12 Roma fr16 beta 4.
I noticed that when I flash a capable kernel oc / uv, my phone stuck on the log's logo...
Anybody has already met this problem?
Thanx
No but if you reflash the rom it will remove the new kernal and put the original one back on and you will keep all your apps etc aswell
I have this problem too, i flash the new Fr17 & Fr18 mcr can't boot. If i just flash the older Fr16 kernel, it booted...............
soo. no way to have a uc/uv kernel on my o2xs ? :'(
If you flash vork then it won't work cause it was meant for CM7
just reflash back the ROM in recovery
Back to Stock Rom.
Try to back to stock rom as said dusitmon123, then Wipe everything, and reinstalling custom rom will work...
dridri85 said:
Try to back to stock rom as said dusitmon123, then Wipe everything, and reinstalling custom rom will work...
Click to expand...
Click to collapse
unfortunately, i have try two times and it is same.
Hi,
I as of yet, am not going close to any ICS build till the issue gets solved by someone.
so I am experimenting with different gb roms. i was using checkrom v6 but didnt like it, so followed steps to install darkyrom/alliancerom extreme edition. i followed the steps as I was told to install allianceota and flash the rom through there. it didnt work. so instead using cmw i flashed through recovery, it did flash but there no root.
so now, i reflashed a stock la6 rooted rom from here; http://forum.xda-developers.com/showthread.php?t=1535025
this went smoothly with no problems, so i installed allianceota as normal, this time when i try to flash the following messages come up:
Installing Multi-CSC
Can't access to '/system/CSC/KOR/system/'
Successfully applied multi CSC"
and then it gives me the option to reboot, wipe cache and a few other options, not full recovery mode.
shall i just reflash the rom through recovery, or am I doing something wrong? and does the slight error above mean I have a problem with my note?
cheers in advance.
Let me just say that almost every ICS ROM out there now has disabled the MMC_CAP_ERASE code in the kernel that activates the eMMc bug and bricks your phone. If you want stock ICS, you can use SpeedMod or Franco kernels. If you want AOKP, there is that now. If you want CM9, there's a bunch of variations plus the official CM9 nightly. If you read through the OP and stickies, you will be okay.
Are you on stock recovery still? It sounds like it from the error you are getting. Try flashing CWM recovery and installing the GB rom with that. Follow Drketan's thread in Android Development.
hmmm, so would you advise me to use ics? is it much better? i dont want to use cm9 builds as i need the spen apps and so on. i have looked into kingdroid or alba.
I'll have to think hard about this. i may give it a shot soon though..
oh and btw, I fixed the problem, yep it was to do with cwm it wasn't installed with the stock rooted rom. as for allianceota, it still didnt flash the rom, i had to flash the rom through cwm manually.
cheers anyhow.
salespalace said:
hmmm, so would you advise me to use ics? is it much better? i dont want to use cm9 builds as i need the spen apps and so on. i have looked into kingdroid or alba.
I'll have to think hard about this. i may give it a shot soon though..
oh and btw, I fixed the problem, yep it was to do with cwm it wasn't installed with the stock rooted rom. as for allianceota, it still didnt flash the rom, i had to flash the rom through cwm manually.
cheers anyhow.
Click to expand...
Click to collapse
I love ICS a lot more than GB. If you want to use stock ICS, I would just use Franco or Speedmod kernels with it and be safe. Read both of their forums and decide what you want to do.
I had the same problem with rom deodex i had flash with odin 1.85 firmware gingerbread here ; http://www.hotfile.com/dl/152168378/f76281c/N7000XXLC1_N7000OXXLB3_ATO.zip.html... then i made wipe cache and cache dalvick .
I've just flashed AlBa repack latest one on xxlq2, I did it by following the steps,
I thought i had broken my phone, because when the flashing finished and i was rebooting, at the beginning when it welcome to galaxy note n7000 and then goes to the bootup video, it restarted that several times, then after like a few minutes it loaded the homescreen and startup.
salespalace said:
I've just flashed AlBa repack latest one on xxlq2, I did it by following the steps,
I thought i had broken my phone, because when the flashing finished and i was rebooting, at the beginning when it welcome to galaxy note n7000 and then goes to the bootup video, it restarted that several times, then after like a few minutes it loaded the homescreen and startup.
Click to expand...
Click to collapse
-Flash a stock GB rom with pc odin
-Root it
-Go to cwm and wipe all (factory reset,cache and dalvik and then Install the ics rom that you like
-Reboot system and now it should work
Sent from my GT-N7000 using Tapatalk 2
Hello!
I tried to flash Nova HD,CM 7.2,CM 10.1 over the official ics from lg,the installation goes well but after i reboot the phone i see no changes,the phone is just the same.
Until now i've flashed lots of custom ROMs without any problems but i came back to the stock ROM,but now i decided to change again my ROM but it just won't work :|
I dont know what happened,the phone is rooted and all are set up but i just cant flash any rom.
I did like 5-6 attempts but the results are the same..
Can anyone help me ?
Just found out that Paranoid Android is working.
But i cant say the same for the others ROMs.
You can't flash CM7 over ICS. Both ROMs use different bootloaders!
Go to the Development forum and use the AIO Toolkit to flash back the old bootloader, then you'll be able to return to CM7.
Thanks!
But what about CM10.1 and Nova HD?
Did you do a full wipe (Factory reset + format /system) while changing from ROM to ROM?
Yes,i did it all the time!
I will try to be as detailed as possible. I have been long time user here, but this is the first time I'm posting. I usually read the instructions and posts and that usually suffices my needs. I was on a rooted galaxy note running chasmodo's assylum rom for quite some time now. For Flashing a new rom, I used to go to recovery mode, flash abbysnote kernel (v 3.9) and install a new rom. A few days ago i tried to flash Ezaechiel XXLT6 KM edition - V2.1. I guess I should have checked md5 of the downloaded rom coz after flashing it, my phone refused to boot up. It always took me to the recovery mode screen where i tried to install abyssnote kernel and reinstall assylum. but it didn't work. So I went to dr. ketan's post and tried to flash a pre rooted rom (SGN_XX_OXA_KJ1_FACTORYFS.zip) using pc odin. Now my phone works fine but i'm on ginger bread. I tried to flash new roms using recovery mode (abbyssnote kernel method) but no new rom can be installed. Everytime I try to install a new rom i face boot loop or get stuck on the setup screen. So I follow the PC odin method to flash the same pre rooted rom (SGN_XX_OXA_KJ1_FACTORYFS.zip) to get my phone working again. I would like to go back to assylumrom because i got used to aosp jellybean so much now. Anybody who has faced a similar problem in the past, please help
Use one of PhilZ kernels and then in his recovery prepare your device for a clean install (there is an option that does more than only "factory reset". With the old ones you didn't clean /preload.
Then follow the instructions to install your preferred Rom.
Thanks
ThaiDai said:
Use one of PhilZ kernels and then in his recovery prepare your device for a clean install (there is an option that does more than only "factory reset". With the old ones you didn't clean /preload.
Then follow the instructions to install your preferred Rom.
Click to expand...
Click to collapse
Thanks for the quick reply thaidai. I will try the method and get back to you I used to do a clean wipe every time.
Mate first upgrade your stock ROM to ICS or JB. The ROMs like Asylum aren't supposed to be installed in GB, so first upgrade, then root and do a full wipe (data,cache,preload,dalvik) and get back to flash the ROM. No need to flash the Abyssnote every time, why do you do that?
Varad297 said:
Mate first upgrade your stock ROM to ICS or JB. The ROMs like Asylum aren't supposed to be installed in GB, so first upgrade, then root and do a full wipe (data,cache,preload,dalvik) and get back to flash the ROM. No need to flash the Abyssnote every time, why do you do that?
Click to expand...
Click to collapse
I tried installing Cassies Xtraliterom XLC1 after the PC odin method. Got boot loop. What I'm basically saying is, after trying the PC odin method to rescue the device, I can't seem to install any other rom on it using the recovery mode route. Not even other GB roms. What am I to do??
Varad297 said:
Mate first upgrade your stock ROM to ICS or JB. The ROMs like Asylum aren't supposed to be installed in GB, so first upgrade, then root and do a full wipe (data,cache,preload,dalvik) and get back to flash the ROM. No need to flash the Abyssnote every time, why do you do that?
Click to expand...
Click to collapse
I started using abyssnote kernel to install new roms after the "brick scare" of last year after which a lot of developers started recommending the method. I used to change between GB, ICS and JB roms easily using the abyssnote kernel. Don't know why it's not working anymore.
Firstly, I must say that bought my i9000 with Mackay rom (4.1.2 then) on it, and that I was very satisfied with it. Since then, I've changed several roms on my SGS.
But, I've been using a new 4.0.1 Mackay KK rom, and still not completely satisfied with some missing options, so I wanted to go back to JB, but I came across some issues. I did exactly how the developer wrote, but no luck. I've been trying to install rom with twrp, but it fails. OK, the developer mentioned it could happen, so I tried to flash again, as said, but still no luck. After that, I tried to flash old kernel, the one for JB, but failed again. TWRP now won't flash anything. Just to mention, the phone isn't bricked. I can power it up, and it works fine.
How can i flash back to old kernel, so I could flash JB again? Or, there is some trick to flash back to JB with kernel 0.600?
Thank U in advance,
filipidis
EDIT: I succeeded in going back to JB. I was somehow able to flash cyancore kernel over TWRP. Then I flashed it again with Mackay kernel, and flashed JB 4.3.
Now, waiting for stable version of Mackay KK.