Q&A for [Q&A] Vanir 5.0 q&a thread
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Q&A] Vanir 5.0 q&a thread. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
seLinux still enforcing...but tried to do setenforce 0 on terminal after reflash su update...nothing happen....
just suggestion...cant put up file manager? i think its crucial part...
correct me if im wrong
Is the Internal Storage merged in this ROM? This is one of the biggest reasons why I haven't tried Lollipop yet.
Hi guys, is data connection and other working?
What are main bugs?
francescohtc said:
Hi guys, is data connection and other working?
What are main bugs?
Click to expand...
Click to collapse
Have 2 bugs, Sim card are recognized, and auto brightnees dont works
hey
auto brightness is not as necessary. but SIM CARD(CHIP) yes is. Unfortunately there is no solution to the case until the second order?
I'm with vanir_huashan_5.0.2.040715 and the SIM CARD does not work.
How to fix this error?
Everything works ! Infact the best lollipop ROM than the 5.1 ROMs ! No FCs at all ! Everything working perfectly indeed ! Fixes are required for sim and calling though ! Enjoy the smoothness of vanir ! :thumbup:
Sent from my Xperia SP using XDA Free mobile app
loynaveen said:
Everything works ! Infact the best lollipop ROM than the 5.1 ROMs ! No FCs at all ! Everything working perfectly indeed ! Fixes are required for sim and calling though ! Enjoy the smoothness of vanir ! :thumbup:
Sent from my Xperia SP using XDA Free mobile app
Click to expand...
Click to collapse
Hi there..can you give me advise for the latest update?
Cause i have same problem with sim card not recognize
Thanks before
na2ng86 said:
Hi there..can you give me advise for the latest update?
Cause i have same problem with sim card not recognize
Thanks before
Click to expand...
Click to collapse
Try flashing Tangerine Kernel.
Related
Q&A for [ROM] [4.4.2/3/4] [OFFICIAL] LiquidSmooth v3.x - Optimus X4HD(P880)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [4.4.2/3/4] [OFFICIAL] LiquidSmooth v3.x - Optimus X4HD(P880). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
noblica said:
I was on Vanir for a while and decided to test this one. It's awesome! Really fast and well...smooth
I only have one question. How do I change the weather widget from the lock screen, to show degrees in Celsius and not Fahrenheit?
Click to expand...
Click to collapse
Only way I've found out is, create the lock screen widget on a desktop page.
when newly created, the settings will appear once. There, you can set celsius or fahrenheit!
rgds
Mike
Please @Demetris and @laufersteppenwolf do not stop EXT 4.
Please, please, please develop further. This rom is very, very great.
Many thanks!
Best regards
Best regards
varadinum said:
Please @Demetris and @laufersteppenwolf do not stop EXT 4.
Click to expand...
Click to collapse
Please provide reasons why.
varadinum said:
Please @Demetris and @laufersteppenwolf do not stop EXT 4.
Please, please, please develop further. This rom is very, very great.
Many thanks!
Best regards
Best regards
Click to expand...
Click to collapse
They aren't stopping it. Demetris plans on reverting to it to ext4 but just doesnt have the time right now.
Mayazcherquoi said:
Please provide reasons why.
Click to expand...
Click to collapse
The main reason is consistency. There simply was not enough research and development to show that f2fs has any performance benefits over ext4 on our phone. Also I can guarantee that most users are on ext4 and do not want to go through the hassle of wiping and reformatting their partitions just to used liquid smooth.
sent from my amazingly awesome OnePlus One
don't forget to hit thanks!
Please tell me, why i can't run other Music Player on ls? Always i have fc's. Help me to fix it!
Thank you @abhi08638!
F2FS has no advantages. That is a fact.
Best regards
Problem with F2FS
Hi, I do not understand munch between Ext4 or F2FS system files. I installed the first and going well, but then to flash version F2FS not start my phone. Am I doing something wrong?
Pd: Ok, I know that, no need your help. From what I've read rather stay in Ext4
Thanks to forum
jrcquinito said:
Hi, I do not understand munch between Ext4 or F2FS system files. I installed the first and going well, but then to flash version F2FS not start my phone. Am I doing something wrong?
Thanks to forum
Click to expand...
Click to collapse
You can't just flash an f2fs rom if you're on ext4. Switching between them requires completely wiping your phone and formatting its partitions. You won't notice any difference between them so just stick to ext4. Also since you flashed an f2fs ROM, and I'm assuming you don't have a backup, you're going to have to do a clean flash to get your phone working again
sent from my amazingly awesome OnePlus One
don't forget to hit thanks!
Hi, looking for setting "wake up display when connected to power". Only found "keep awake while conncted"
Gesendet von meinem SM-T520 mit Tapatalk
Q&A for [ROM][AOSP][Nightly/Release] CarbonRom KitKat [n7000]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][AOSP][Nightly/Release] CarbonRom KitKat [n7000]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Install the rom !
hello , I would like to know how do to install this rom ? could make a tutorial?
wi-fi direct
hi
why the wi fi direct doesn't work
hi guys, im a noob and currently want to update my phone gt-n7000.
using clockwork rom manager to install. after i press install, there android working and after that the phone turn off by itself.
any suggestion? or something i did wrong.
already rooted and have superuser. hmmm
please help
Don't use rom manger, read the instruction for flashing the rom. That's all
HELP! Camera doesn't work , External Sd card not detected, How to fix?
i just installed the latest version of this ROM , and when it's done, i can't browse my external storage, so the gallery can't detect my ext-sd card and the camera said "unfortunately, camera has stopped"
how to fix this?? what should i do? i like the ROM, plis help me...
thank you.
best regard.
Remember, guys..
Before posting, please use the forum search and read through the discussion thread for [ROM][AOSP][Nightly/Release] CarbonRom KitKat [n7000]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Click to expand...
Click to collapse
I just installed this ROM, and my first experience, charging this ROM its taking too long time to charge. approx 3 hours to fully charged when screen and data off. but it's anice, clean, and smooth ROM.
green37 said:
I just installed this ROM, and my first experience, charging this ROM its taking too long time to charge. approx 3 hours to fully charged when screen and data off. but it's anice, clean, and smooth ROM.
Click to expand...
Click to collapse
Previously I was on CM11 and have installed this ROM yesterday..
It is many times stable and more fun..
charging time was not bad.. I took approximately 1 hour to go from 65% to 97%..
I am yet to understand all the settings in 'Carbon Fibers'..
It is one of the best ROM so far.. hopefully there will be LP for our device.
status 6 error
every time i try to flash carbon rom on my galaxy note n7000 via clockwork mod recovery,the installation aborts displaying error 6.
help me sort this out cuz i want to flash this rom on my phone.
galaxy note n7000
baseband version=ddls6
kernel version=3.031-90647.
android version=4.1.2(J.B)
rilj wakelock
Rom is great, but i do have this wakelock not letting phone enter into deep sleep. Any known fix please?
jhs.bdn said:
Rom is great, but i do have this wakelock not letting phone enter into deep sleep. Any known fix please?
Click to expand...
Click to collapse
Fix link
Thanks a lot mate! I'll try as soon as possible.....
I think it is the last one. Saved in my Mega.
https://mega.nz/#!l1FAjbYS!Q2P62Zk7YJRHyQhWYmZruoqGAWAbVaIxjABR7ZTYvtI
rom
can you please update the link?
QA Bot said:
Q&A for [ROM][AOSP][Nightly/Release] CarbonRom KitKat [n7000]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][AOSP][Nightly/Release] CarbonRom KitKat [n7000]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Click to expand...
Click to collapse
i have the same problem in posting , any way ... why u use carbon while u have cyanogenmod ... i tried both and carbon is not good
Q&A for [ROM][4.0.4][BUILD4]CyanogenMod9.3 ICS-PLUS[STABLE][UPDATED 02-03-2014]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][4.0.4][BUILD4]CyanogenMod9.3 ICS-PLUS[STABLE][UPDATED 02-03-2014]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Venkatesh said:
Guys, i am working on final update for this rom. It'll have new kernel, improved memory management(kitkat style),swap/zram together, more importantly ath6kl wifi drivers(everthing is done except this,wifi broken now).
Stay tune for new update.
Sent from my GT-S5570 using XDA Free mobile app
Click to expand...
Click to collapse
okayy,,
like same galaxy s5??
TUN problem while trying to use TroidVPN, suspected tun.ko module problem?
Thanks for this ROM @Venkatesh, I have a problem trying to use TroidVPN which gives an error about TUN that can't be accessed. Please help? Is this a tun.ko problem or something?
Thanks in advance
d3vr said:
Thanks for this ROM @Venkatesh, I have a problem trying to use TroidVPN which gives an error about TUN that can't be accessed. Please help? Is this a tun.ko problem or something?
Thanks in advance
Click to expand...
Click to collapse
Yes. tun.ko problem. Module is not present in system/lib/modules. And I am not going to update this rom anymore.
Sent from my GT-S5570 using XDA Free mobile app
Thanks for this ROM @Venkatesh, I have a problem : charging, battery status & notification sound not work?
any solutions?
aephobia said:
Thanks for this ROM @Venkatesh, I have a problem : charging, battery status & notification sound not work?
any solutions?
Click to expand...
Click to collapse
May be i forgot include sounds in system/media. You could just select one from sdcard.
Q&A for [KERNEL][TITAN] Unamned Kernel [CM 12.0]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL][TITAN] Unamned Kernel [CM 12.0]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Ver y good
Question
Does it work with the Titan Prime Rom for the xt1063??
notsomoto said:
Does it work with the Titan Prime Rom for the xt1063??
Click to expand...
Click to collapse
Same so for the XT1068 ??:cyclops:
notsomoto said:
Does it work with the Titan Prime Rom for the xt1063??
Click to expand...
Click to collapse
metalrules321 said:
Same so for the XT1068 ??:cyclops:
Click to expand...
Click to collapse
Well, the thread-title says explicitly that it is for CM12 based ROM.
Noob question
How can I enable S2W? I'm running your build of CM12.
Could you add:
2FS support?
Double/Swipe Tap 2 Wake ?
doppelhelix said:
Well, the thread-title says explicitly that it is for CM12 based ROM.
Click to expand...
Click to collapse
Sorry I am learning about kernels, It is for the luca020400 cm12 rom? How do you activate the sweep2wake feature?
A app that can adjust specific parameters of this Kernel...
I know that have allot app to edit some parameters, but toes that i find can make much...
tks.
Do I need to reflash it every time I flash a CM12 Update?
respuestas ..?
Swype to wake not working that bad , if it worked creator, in the first generation m.oto g1 is no kernel with this function is not ouede adapt a kernel of this for nustro phone
Does anyone know if this will work with cm13?
Q&A for [Nook HD/HD+][EMMC][4.3]Unofficial CarbonRom JB3 | 12-05: Wi-Fi update)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Nook HD/HD+][EMMC][4.3]Unofficial CarbonRom JB3 | 12-05: Wi-Fi update). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Dead???
Are you still developing this? Or what? Just installed, about to reboot. Hope it works! :fingers-crossed: If you're still developing, thx for working so hard. If not, thx for working so hard. Edit: Cannot open any apps, even though I installed GAPPS. ANy fix?
JBreadWater said:
Are you still developing this? Or what? Just installed, about to reboot. Hope it works! :fingers-crossed: If you're still developing, thx for working so hard. If not, thx for working so hard. Edit: Cannot open any apps, even though I installed GAPPS. ANy fix?
Click to expand...
Click to collapse
Since this was a 4.3 ROM, I haven't weighed on this for over a year...
Are your sure you installed the correct gapps?